CAM LOCKSsislock.com/wp-content/uploads/fechos-cilindro.pdf · Stainless steel dust cap (Keyed...

email | sales@essentracomponents.co.uk web | www.essentraaccesssolutions.com

CAM LOCKS

CAM LOCK

• Quarter-turn operation• Body length 20.5 mm (Please be

sure to order appropriate cam)• Available in all die-cast zinc alloy or

with polyamide housing

APPLICATIONSElectric panels, machinery coversMATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1 or PA6 GFR 30

CAM: Steel or PlasticGASKET: Rubber

For cams please check pages: 144 - 145

MATERIAL M

Zamak 1

Plastic 2

FINISH FChrome 1Black coated 2No finish 0

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

CYLINDER SPECIFICATIONS DDKeyed alike 01Keyed differ 02Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (Keyed differ) 32Master System 04Euro key (5333) 05CH751 (Stainless steel dust cap) 07

063 1-1-DD-CCZAMAK - CHROME

063 1-2-DD-CCZAMAK - BLACK COATED

063 2-0-DD-CCPLASTIC

Cut out

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

SPRING CAM LOCK

• Spring-loaded cam provides depress-to-lock action

• Distance between inside of lock face and front of cam fixed at 24 mm

• There is no IP 65 version of this lock,due to spring loaded cam

1774-ZnAl4Cu1CYLINDER: Zamak DIN-EN

1774-ZnAl4Cu11CAM: SteelGASKET: Rubber

CYLINDER SPECIFICATIONS DDKeyed alike 01Keyed differ 02Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (Keyed differ) 32Master System 04Euro key (5333) 05CH751 (Stainless steel dust cap 07

PRODUCT CODE

MATERIAL M

Zamak 1

FINISH FChrome 1Black coated 2

Right hand RH

Left hand LH

0021163 F D D

GROUP CODE CYLINDERFINISHMATERIAL

Cut out

Min Max

0.8 mm 1.8 mm

Door Thickness

Clips to fix

Cut out

CAM LOCKS

KNOB LOCK

• Clip fixing for easy assembly• Mounting nut not required• Special 20 mm x 26 mm cut out• No IP 65 version of this lock• 1.8 mm maximum panel thickness

APPLICATIONSElectric panels, machinery coversMATERIALHOUSING: Polyamide DIN-EN ISO

1043-1 PA6 GFR 30CAM: Steel or PlasticGASKET: Rubber

CYLINDER SPECIFICATIONS DDKeyed alike 01Keyed differ 02Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (Keyed differ) 32Master System 04Euro key (5333) 05CH751 (Stainless steel dust cap 07

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

CAM LOCK – WING KNOB

• Stainless steel version: page 446• Quarter-turn operation• Available in all die-cast zinc alloy

or with polyamide wing knob and housing

• Optional blind version

1774-ZnAl4Cu1CAM: Steel or PlasticGASKET: Rubber

065 1-1-DD-CCZAMAK – CHROME

065 1-2-DD-CCZAMAK – BLACK COATED

MATERIAL M

Zamak 1

Plastic 2

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

CYLINDER SPECIFICATIONS DDNo cylinder 00Keyed alike 01Keyed differ 02Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (Keyed differ) 32Master System 04Euro key (5333) 05CH751 (Stainless steel dust cap) 07

No cylinder ‘00’

Cut out

CAM LOCKS

MINI CAM LOCK – WING KNOB

• Quarter-turn operation• Available all die-cast zinc alloy• Suitable for small cabinets

1774-ZnAl4Cu1KNOB: Zamak DIN-EN

1774-ZnAl4Cu1CAM: Steel

For cams please check page: 149

MATERIAL M

Zamak 1

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

45º c

ut out

CYLINDER SPECIFICATIONS DD

Stainless steel dust cap (Keyed alike) 03

Stainless steel dust cap (Keyed differ) 32

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

CAM LOCK – T HANDLE

• Stainless steel version: page 444• Quarter-turn operation• Available in all die-cast zinc alloy or

with polyamide wing handle and housing

Cut out

CYLINDER SPECIFICATIONS DDNo cylinder 00Keyed alike 01Keyed differ 02Euro key (5333) 05CH751 (Stainless steel dust cap) 07

MATERIAL M

Zamak 1

Plastic 2

For only IP 65

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

CAM LOCKS

CAM LOCK – L HANDLE

• Stainless steel version: page 445• Quarter-turn operation• Available in all die-cast zinc alloy or

Cut out

MATERIAL M

Zamak 1

Plastic 2

For only IP 65

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

CAM LOCK – T HANDLE

• For soundproof or isolated doors• Supplied with adapter suitable to

standard housing• Available in all die-cast zinc alloy or

Cut out

MATERIAL M

Zamak 1

Plastic 2

CYLINDER

HANDLE

MATERIAL

FINISH

PRODUCT CODE

GROUP CODE

DOOR THICKNESS

064 110-DT-1-1-DD-CCZAMAK – CHROME

064 110-DT-1-2-DD-CCZAMAK – BLACK COATED

064 110-DT-2-0-DD-CCPLASTIC

CAM LOCKS

CAM LOCK – L HANDLE

• Primarily for soundproof or isolated doors

• Supplied with adapter suitable to standard housing

• Available in all die-cast zinc alloy or with polyamide wing handle and housing

For cams please check page: 144 - 145

MATERIAL M

Zamak 1

Plastic 2

064 111-DT-1-1-DD-CCZAMAK – CHROME

064 111-DT-1-2-DD-CCZAMAK – BLACK COATED

064 111-DT-2-0-DD-CCPLASTIC

CAMCYLINDERHANDLE MATERIAL FINISH

PRODUCT CODE

GROUP CODE DOOR THICKNESS

Cut out

C CD D111 M F064 D T

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

COMPRESSION LOCK – T HANDLE

• Used for cabinets require better sealing under vibrating conditions

• Provides 6 mm of compression• Provides noise isolation• Standard cams without stopper

required for these locks

APPLICATIONSRailway applications, construction equipment, electric panels, machinery covers

MATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1HANDLE: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelGASKET: Rubber FINISHChrome or black coated

MATERIAL M

Zamak 1

CAMCYLINDERGROUP CODE MATERIAL FINISH

PRODUCT CODE

VERSION

AttentionStandardCut Out

SpecialCut Out

C CD D240 1 FV

CYLINDER SPECIFICATIONS DDNo cylinder 00Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (Keyed differ) 32CH751 (Stainless steel dust cap) 07

060 A3

:4:2KNOB

CAM LOCKS

COMPRESSION LOCK – T HANDLE

• For the cabinets that require better sealing under vibrating conditions

• Provides 6 mm of compression• Wide grip range with adjustable

screw• Provides noise isolation• Three cam alternatives available

APPLICATIONSRailway applications, construction equipment, electric panels, machinery covers

1774-ZnAl4Cu1HANDLE: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISH Chrome or black coated

FIXING DEVICE

• Can be ordered separately

MATERIAL M

Zamak 1

CYLINDER

GROUP CODE MATERIAL

FINISH

PRODUCT CODE

VERSION

KNOB CC CH CL H GRIPMIN MAX

01 0 33 41 58

02 14 33 27 72

03 27.5 33 13.5 85Attention

StandardCut Out

SpecialCut Out

060 A3

CAM LOCKS

COMPRESSION LOCK – WING KNOB

• For the cabinets that require better sealing under vibrating conditions

• Lock provides 6 mm of compression• Wide grip range with

adjustable screw• Provides noise isolation• Three cam alternatives available

APPLICATIONSRailway applications, construction equipment, electric panels, machinery coversMATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1 KNOB: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISHChrome or black coated

FIXING DEVICE

• Can be ordered separately

AttentionStandardCut Out

SpecialCut Out

MATERIAL M

Zamak 1

CYLINDER

GROUP CODE

MATERIAL

FINISH

PRODUCT CODE

VERSION

KNOB CC CH CL H GRIPMIN MAX

01 0 33 41 58

02 14 33 27 72

03 27.5 33 13.5 85

For padlock only

Padlock application

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

COMPRESSION LOCK – WING KNOB

• Used for cabinets that require better sealing under vibrating conditions

• Provides 6 mm of compression• Provides noise isolation• Standard cams without stopper

required for these locks

APPLICATIONSRailway applications, construction equipment, electric panels, machinery coversMATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1 KNOB: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISHChrome or black coated

StandardCut Out

SpecialCut Out

Attention

MATERIAL M

Zamak 1

CYLINDER

GROUP CODE

MATERIAL

FINISHVERSION

PRODUCT CODE

For padlock only

Padlock application

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

CAM LOCK

APPLICATIONSBriefcases, steel drawers, machinery coversMATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelFINISHChrome plated

Cut out

KEY ROTATION ANGLE

CAM GROUP

M 12 Nut

050 D D

GROUP CODE CYLINDER

CAMVERSION

PRODUCT CODE

CYLINDER SPECIFICATIONS DDKeyed alike 01Keyed differ 02Stainless steel dust cap (Keyed alike) 03Stainless steel dust cap (1000 Keyed differ) 32Euro key (5333) 05

CAM LOCKS

CAM LOCK

APPLICATIONSWooden and steel cupboard

KEY ROTATION ANGLE

CAM GROUP

Cut out

050 D D

GROUP CODE CYLINDER

CAMHOUSING LENGTH

PRODUCT CODE

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

CAM LOCK

• Designed for polyester cabinets • Very low profile head• Please note special shape of

mounting hole

APPLICATIONSPolyester cabinets and steel cabinets MATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelFINISH Chrome plated

KEY ROTATION ANGLE CAM GROUP

M 5 Bolt

150 D D

GROUP CODE CYLINDER

CAMHOUSING LENGTH

PRODUCT CODE

Cut out

Non removable key

CAM LOCKS

CAM LOCK

APPLICATIONSBriefcases, steel drawers, machinery covers MATERIALHOUSING: Zamak DIN-EN

KEY ROTATION ANGLE CAM GROUP

M5 Bolt

Cut out

250 D D

GROUP CODE CYLINDER

CAMHOUSING LENGTH

PRODUCT CODE

Cut out

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

MINI CAM LOCK

• Keyed differ has maximum 100 key combination

APPLICATIONSMetal drawers, metal cabinets, post boxesMATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1CAM: SteelFINISHChrome

KEY ROTATION ANGLE

Fixed by nut

KEY ROTATION ANGLEFixed by clips

057 D D

GROUP CODE CYLINDER

CAMVERSION

PRODUCT CODE

Cut out

157 D D

GROUP CODE CYLINDER

CAMVERSION

PRODUCT CODE

CAM LOCKS

MINI CAM LOCK

• Suitable for both steel and aluminium profile

APPLICATIONSMetal drawers, metal cabinets, post boxes, aluminium profiles MATERIALHOUSING: Zamak DIN-EN

1774-ZnAl4Cu1CAM: Steel

Cut out

Thickness: 0.7 mm

Fixed by clips

KEY ROTATION ANGLE

Hook cam (CC: 29)

STOCK CODE CC CH CL LH:9.5

H30403487 27 0 16 9.5

31403040 28 1 33 10.5

31403032 23 1 38 10.5

30403469 24 5 38 14.5

31403041 29 6 30 15.5

DOOR THICKNESS VERSION1.2 -1.5 mm thickness panel 10.8 -1.2 mm thickness panel 2

tel | 0845 758 5070 fax | 0845 609 0049

CAM LOCKS

MINI CAM LOCK

• Easy assembly with clips on housing

APPLICATIONSMetal drawers, metal cabinets, plastic boxes

MATERIALHOUSING: Polyamide DIN-EN ISO

1043-1 PA6 GFR 30CAM: SteelFINISHChrome

KEY ROTATION ANGLE

Hook cam (CC: 29)

257 D D

GROUP CODE CYLINDER

PRODUCT CODE

STOCK CODE CC CH CL LH:9.5

H30403487 27 0 16 11

31403040 28 1 33 12

31403032 23 1 38 12

30403469 24 5 38 16

31403041 29 6 30 17

Cut out

CAM LOCKS

CAM LOCK

• High-security lock• Unique key combination available• Two different housing lengths

(18 mm and 25 mm)• For different cam alternatives

contact Essentra

APPLICATIONSMetal cabinets, post boxesMATERIALHOUSING: BrassCAM: SteelNUT: Brass

Cut out

056 D D

GROUP CODE CYLINDERGRIP

PRODUCT CODE

CAM LOCKSsislock.com/wp-content/uploads/fechos-cilindro.pdf · Stainless steel dust cap (Keyed...

Documents

Transcript of CAM LOCKSsislock.com/wp-content/uploads/fechos-cilindro.pdf · Stainless steel dust cap (Keyed...

5.1 CAMLOCKS 82-88 5.2 TYPE ‘B’ BAUER COUPLINGS 89-90 … · type dc: female dust cap type dp: male dust plug size (nb) aluminium poly / nyglass stainless steel 316 1/2” k/ald-dc012

Oil & dust tight lift off cover stainless steel enclosures

Keyed Pr Outline

Mole Measurement of DCA311 Collar-Keyed …...Mole Measurement of DCA311 Collar-Keyed Assembly TS-SSC 91-150 S. Delchamps August 7, 1991 Introduction: The DCA311 collar-keyed assembly,

Stainless steel sanitary deck around manhole. Dust cover vent

Tamper evident encryption of integers using keyed Hash ...

TYPHOON WX SERIES - Diversitech · The stainless steel wet dust collector excels at capturing combustible/hazardous dust from your plant air. The blower draws air through DiversiTech’s

Dust to dust

Goulds Vertical Printer - ifcpump.comifcpump.com/files/product/v-series.pdf · pumps. It is less expensive. KEYED LINESHAFT Keyed lineshaft coupling is recommended for motors larger

5 Gbps DPSK Microring - Columbia Universitylightwave.ee.columbia.edu/Publications/Padmaraju2011b.pdf · Differential-phase-shift-keyed (DPSK) modulation, when compared to on-off-keyed

Workshop: Manipulating CID-Keyed Fonts Using …blogs.adobe.com/CCJKType/files/2012/10/atypi2012-afdko-lunde.pdf · A “cidfontinfo” "le is necessary for name-keyed → CID-keyed

March 2019 · 2019. 2. 26. · Spray Nine® Glass & Stainless Steel Cleaner C23319 - 600g Aerosol Removes dirt, dust, fingerprints, smudges and light grease from glass, stainless

Outdoor Cam Locks - illinoislock.com cam locks resist moisture, dust, salt and extreme temperatures Various cams, rota- tions, key pulls and finishes. Available keyed- alike or keyed-dif-ferent

Five keyed clarinet (Glick diss).pdf

DEMOLITION KEYED NOTES NOTE: NOT ALL KEYED … · dn dn demolition keyed notes 1 remove existing wall in its entirety. salvage existing wood trims associated with existing wall to

KEYED ENTRY - Scene7

KEYED NOTES - RPM & Associates

Dust Grey Dust

1710MKADA, 1714MKADA & 1790MKADA Series Built-in Keyed ...

MKTG 2016 - ETA · MKTG 2016. Suite Rack/Networking Modular PC Monobloc ... Pharma Industrial Harshenvironment Washing/ High T Dust Dust MildMildsteel steel Stainless steel AISI316L