Post on 15-May-2015
technical drawingschool of art, design and architecture
nust – spring 2011
Objective abstraction
- axonometric view
technical drawing introductionwhat is a planometric/oblique plan drawing?
An planometric drawing is an
angled drawing in which the
horizontal lines are drawn at
45-45 degree or 30-60
degree angle and the
vertical lines are left straight.
As a result, an axonometric
drawing is simply a picture of
an object viewed at an angle.
Intro to technical drawingplanometric view
technical drawing introductionDrawing oblique plan drawing
Planometric: the base
and top of the object
retain their true shape,
but are drawn on an
angle so that both sides
recede at 45 degrees (or
one side recedes at 30
degrees and the other at
60 degrees).4545
Intro to technical drawingplanometric view
technical drawing introductionComponents of a planometric drawing
45
vertical axis
horizontal axis
angular lines
45 60 30
Intro to technical drawingplanometric view
technical drawing introductionHow to draw an oblique plan drawing?
In these drawings, the object's vertical
lines are drawn vertically, and the
horizontal lines in the width and depth
planes are shown at 45 degrees or 30-
60 degrees to the horizontal.
Intro to technical drawingplanometric view
Intro to technical drawingplanometric view
technical drawing introductionHow to draw an oblique plan drawing?
These three lines of the
planometric axis represent the
three primary dimensions of the
object: width, height, and depth.
y
x
z
Intro to technical drawingplanometric view
technical drawing introduction
drawing plan in planometric
plan
oblique plan
elevation
60 30
technical drawing introduction
Sketching planometric (at 45 degrees)
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
45 degree right
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
45 degree left
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
vertical
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
45 degree left
vertical
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
45 degree right
45 degree left
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
45 degree right
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
hidden lines
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching axonometric(at 45 degrees)
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric (at 30-60 angle)
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching axonometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric
Intro to technical drawingaxonometric view
Intro to technical drawingaxonometric view
technical drawing introduction
Sketching planometric (at 30-60 angle)
attention – assignment 8Create an axonometric view
Intro to technical drawingassignment
Intro to technical drawingisometric view
technical drawing introduction
Inspirational images
Map in isometric view
Intro to technical drawingisometric view
technical drawing introduction
Inspirational images
Axonometric urbanism
technical drawing introduction
quote of the day
Intro to technical drawingsada, spring 2010
What is IN ME is greater than what is happening TO ME."
Sheye Hassan
technical drawing introduction
building of the day
Intro to technical drawingsada, spring 2010
Solar arc, Japan
Intro to technical drawingsada, spring 2010
technical drawing introduction
[can you draw? Part 8]
video of the day
http://www.youtube.com/watch?v=rN2g_7wEr4M&feature=related
http://www.youtube.com/watch?v=k3OiaEayouc&feature=related
Intro to technical drawingsada, spring 2010