Audio Configuration Tutorial

Post on 05-Dec-2014

13.233 views 0 download

description

 

Transcript of Audio Configuration Tutorial

How to set up your microphone:

This tutorial explains how to configure the Realtek Audio

Manager for recording purposes.

BEFORE STUDENTS PLUG IN HEADPHONES:

Open the Realtek Audio Manager.This can be found in the Control Panel.

Choose Audio I/O tab

Click the wrench under the Analog Section

Deselect “Mute rear panel”Deselect “Enable auto popup dialog”Select “disable front panel jack det.”

This should prevent a popup box from continually ‘popping up’ on some of the students’ screens. I’ve found that on some computers, it will inevitably happen anyway. : (

You don’t HAVE to do this, but like I said, some kids will have an annoying popup that won’t go away, and you’ll have to deal with them

Now, Click “information”

Select Show icon in sys. TrayIt should be green.

Use 3D demo to test if the student can hear with their headphones

Make sure all levels are up, especially Record, Front Mic and

Mic Volume

Also, open these tiny icons, one by one, and…

…boost the mic

Make sure nothing is “muted”

Right click the icon in the system tray

Select the Sound Recorder

And test if they can record. If so, they’re good to go!