Post on 14-Mar-2020
1
■ I-Studs & Fire Rated Assemblies
■ Metal Channels & Interior Framing
■ Structural Framing
■ Metal Lath
■ Stucco, Veneer, Plaster Beads & Trims
■ Metal Beads & Trims
■ Vinyl Beads & Trims
■ Paper Faced Beads & Trims
■ Paper Faced Flexible Corner Trim
Visit PHILLIPSmfg.com for more information: » Full Product Catalog » LEED Submittal Info » Assembly Drawings » Submittals » Installation Recommendations » Packaging Sheets » And much more!
ARCHITECT PRODUCT SPEC GUIDE
2
Metal Lath / Structural Framing / Metal Beads & Trims / Vinyl Beads & Trims / Paper Faced Beads & TrimsStucco, Veneer, Plaster Beads & Trims / Metal Channels & Interior Framing / I-Studs & Fire Rated Assemblies
Phillips I-Stud Shaftwall/Stairwell Assembly
Phillips RC-1 Resilient Sound Channel
Phillips RC-2 Resilient Sound Channel
SPEC PHILLIPS TOP QUALITY PRODUCTSMasterFormat (95 Version)
MasterFormat (04 Version) Section Title Phillips Products to Specify
09111 092216Non-Load Bearing
Metal Framing
Knurled Angle Runner, Cold Rolled Channel, RC-1 Resilient Sound Channel, RC-2 Resilient Sound Channel, DWC Hat Furring Channel, Z-Furring Channel, Metal, Vinyl and
Paper Beads & Trims
05400 054000 Cold Formed Metal Framing
Structural Studs and Tracks, Heavy Gauge Angle Runner and Cold Rolled Channel
09210 092300 Gypsum Plaster
Stucco, Veneer & Plaster Beads & Trims, Diamond Mesh Lath, Self-Furring Diamond Mesh Lath, Metal, Vinyl and Paper Faced
Beads & Trims
09215 092613 Gypsum Veneer Plaster
Stucco, Veneer & Plaster Beads & Trims, Diamond Mesh Lath, Self-Furring Diamond Mesh Lath, Metal, Vinyl and Paper Faced
Beads & Trims
09250 092900 Gypsum Board Metal, Vinyl and Paper Faced Beads & Trims
09265 092116.23Gypsum Board
Shaftwall Assemblies
I-Stud, J-Track, Hemmed H-Stud, U-Track, Metal, Vinyl and Paper Faced Beads & Trims
Our Mission: Lead the industry in delivering innovative products and services that add value to our customers and build their long-term success.
Phillips Diamond Mesh Lath
3
I-Stud
Tabbed J-Track
I-STUDS & FIRE RATED ASSEMBLIES
2-1/2", 4" or 6"
Drawing not to scale
2-1/4" or 3" Leg
2-1/2", 4" or 6"Drawing not to scale
Phillips I-Stud for Fire Rated Cavity Shaftwall/Stairwell Assemblies: » Simple 2-piece system (unlike competitors 3-piece system) » Tested in accordance with following ASTM standards:
» ASTM E-119 Fire Endurance Ratings » ASTM E-90 Sound Transmission Loss » ASTM E-72 Transverse Load Test
» Listed with following nationally recognized evaluation services: » ICC ES, Inc. Legacy Reports: 89-35.01, 95-25B, ER-3579, ER-4924 » UL Designs: U497, U498, U499, V433 » Intertek (Warnock Hersey) Designs: PMC/WA 60-01, PMC/WA 120-01,
PMC/WA 120-02, PMC/WA 180-01 » Additional designs and test results available at:
» www.PHILLIPSmfg.com » GA-600 Gypsum Association Fire Resistance Design Manual
"Engineered to Perform"
* 6” available in 20 gauge only
4
Hemmed H-Stud
U-Track
ASW Clips
AREA SEPARATION WALL
2"
The fire-protection of Area Separation Walls provided protection to the adjacent townhomes.
Drawing not to scale
2"
Drawing not to scale
5
Knurled Angle Runner 90o Cold Rolled Channel
Drawing not to scale Drawing not to scale
RC-1 Tru 25® Gauge Resilient Sound Channel
RC-2 (Two Leg Resilient Sound Channel)
Drawing not to scale Drawing not to scale
DWC Hat Furring Channel Z-Furring Channel
Drawing not to scale Drawing not to scale
Conventional Metal Studs Conventional Metal Tracks
Drawing not to scale Drawing not to scale
Flat Strap (Flat Stock)
METAL CHANNELS & INTERIOR FRAMING
90
3/4" or 1-1/2"
7/8"
1-5/8", 2-1/2", 3-5/8", 4" or 6" 1-5/8", 2-1/2", 3-5/8", 4" or 6"
1", 1-1/2" or 2"
"Engineered to Perform"
Phillips Interior Framing Products: » RC-2 Resilient Sound Channel has expanded metal for quality
sound control and hemmed edges for ease of installation » Studs and Tracks are roll-formed from corrosion resistant
galvanized steel » Studs have pre-punched knockouts for easy installation
6
Diamond Mesh Lath
Self-Furring Diamond Mesh Lath
METAL LATH
MasterFormat (95 Version)
MasterFormat (04 Version) Section Title Phillips Products Applicable
09210 092300 Gypsum Plaster
Diamond Mesh Lath and Self-Furring Diamond Mesh Lath
Phillips Metal Lath: » Manufactured to specified weight with hot-dipped galvanized steel » Use with complete confidence in all applications
"Engineered to Perform"
7
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
STUCCO, VENEER, PLASTER BEADS & TRIMS
8
Phillips Metal Beads and Trims: » Strong, dent resistant corner and edge reinforcements » Durable, economical and straighter corners » Deeply knurled mud anchors on flanges
"Engineered to Perform"
Metal Corner Bead Splay Corner Bead
Drawing not to scale Drawing not to scale
Bullnose Corner Bead Bullnose Splay Corner Bead
Drawing not to scale Drawing not to scale
Bullnose Door & Window Bullnose J-Round
Drawing not to scale Drawing not to scale
Bullnose Kerf 093 Expansion Control Joint
Drawing not to scale Drawing not to scale
U-200 Trim L-200 Trim
Drawing not to scale Drawing not to scale
J-400 Trim (Reveal Trim)
Drawing not to scale
METAL BEADS & TRIMS
Open Angle
1-1/4" x 1-1/4"
Open Angle
1-1/2" Radius 7/8"
7/8"3/4" Radius
1/2" or 5/8"
Removable Tape
1/2" or 5/8"
1/2" or 5/8"
1/2" or 5/8"
Hemmed EdgesFor Easy Slip-onApplication
7/8"
7/8"
1-1/2" Radius
3/4" Radius
7/8"1-1/2" Radius
3/4" Radius 7/8"
1-1/4" x 1-1/4"
9
Phillips gripSTIK® Vinyl Products: » Textured and knurled to enhance joint compound adhesion » Durable, impact and corrosion resistant » Tapered flanges for seamless finish work
"Engineered to Perform"
Drawing not to scale Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale Drawing not to scale
Drawing not to scale Drawing not to scale
VINYL BEADS & TRIMS
1"
1"3/8" Radius
3/4" Radius 7/8"
1-1/2" Radius
Notched Flange
7/8"1-1/2" Radius
3/4" Radius
7/8"
3/8" Radius1"
Open Angle
7/8"
1/4", 3/8", 1/2", 5/8" or 3/4" 3/8", 1/2" or 5/8"
1" 1"
1/4", 3/8", 1/2" or 5/8"
Tear Off
3/4" Radius
1-1/2" Radius7/8"
7/8"
Open Angle
1-1/4" x 1-1/4"
1-1/2" Radius
3/4" Radius
7/8"
7/8"
3/8" Radius1"
1-1/4" x 1-1/4" 1-1/4" x 1-1/4"Notched Flange
10
Phillips kwikSTIK® Paper Faced Products: » No edge cracking » Patented paper prevents balling when sanding
Phillips kwikSTIK® Paper Faced Tape-On Products: » No nail pops and no call backs » No fasteners or nails needed for installation
"Engineered to Perform"
"Engineered to Perform"
P1 XW EL (PEW) P1 Micro Bead (PIM) No Bead P1 X EL NB (P1N)
Drawing not to scale Drawing not to scale Drawing not to scale
No Bead Super Wide (PNB) P1-OS Splay (PSS) SLOK (PBT)
Drawing not to scale Drawing not to scale Drawing not to scale
SLOK-OS (PAT) 3/4” Southwestern Bullnose (PST) 1-1/2” Bullnose (PHT)
Drawing not to scale Drawing not to scale Drawing not to scale
1-1/2” Bullnose Splay (PJT) SLOK-N (PBN) SLOK-NXW (PEN)
Drawing not to scale Drawing not to scale Drawing not to scale
SLOK-NOS (PAN) P2 (PIC) P2-OS (PSI)
Drawing not to scale Drawing not to scale Drawing not to scale
P4 L-Trim (PL1/PL5)
Drawing not to scale
7/8"
5/8" 11/16"
1-1/16"
5/8"7/8"
Open Angl e
7/8" 3/4"Radius 5/8"
1" 3/4"Radius
5/8"
Open Angle
7/8" 3/4"Radius 9/16"
1-1/2"Radius1" 3/4"
1" 3/4"1-1/2"Radius
Open Angle
5/8" 3/4"Radius
7/8" 3/4"Radius
3/4"Radius
1-1/16"
Open Angle
1-1/4"1"1/2"
1-1/4"7/8"
5/8"
PAPER FACED BEADS & TRIMS
5/8"
13/16"
11
Phillips RollPRO® Paper Faced Flexible Corner Trim: » Flex to any corner angle » Perfect for irregular drywall intersections » Quick professional finish
"Engineered to Perform"
Paper faced corrosion resistant flexible vinylQuick professionally finished inside and
outside cornersProprietary high strength paper with durable fibers
promotes high wet and tear strengthSmooth consistent finishes with superior
mud and paint adhesion
Perfect for irregular drywall intersections
2-3/4” Width100’ Length
30.48m 69.85mm
Quick-Grab Handle
Product Dispenser
PAPER FACED FLEXIBLE CORNER TRIM
2-3/4” RollPRO® Paper Faced Trim
3-1/4” RollPRO® Paper Faced Trim
Quick-Grab Handle
Product Dispenser