ARCHITECT PRODUCT SPEC GUIDE · Structural Studs and Tracks, Heavy Gauge Angle Runner and Cold...

1

■ I-Studs & Fire Rated Assemblies

■ Metal Channels & Interior Framing

■ Structural Framing

■ Metal Lath

■ Stucco, Veneer, Plaster Beads & Trims

■ Metal Beads & Trims

■ Vinyl Beads & Trims

■ Paper Faced Beads & Trims

■ Paper Faced Flexible Corner Trim

Visit PHILLIPSmfg.com for more information: » Full Product Catalog » LEED Submittal Info » Assembly Drawings » Submittals » Installation Recommendations » Packaging Sheets » And much more!

ARCHITECT PRODUCT SPEC GUIDE

2

Metal Lath / Structural Framing / Metal Beads & Trims / Vinyl Beads & Trims / Paper Faced Beads & TrimsStucco, Veneer, Plaster Beads & Trims / Metal Channels & Interior Framing / I-Studs & Fire Rated Assemblies

Phillips I-Stud Shaftwall/Stairwell Assembly

Phillips RC-1 Resilient Sound Channel

Phillips RC-2 Resilient Sound Channel

SPEC PHILLIPS TOP QUALITY PRODUCTSMasterFormat (95 Version)

MasterFormat (04 Version) Section Title Phillips Products to Specify

09111 092216Non-Load Bearing

Metal Framing

Knurled Angle Runner, Cold Rolled Channel, RC-1 Resilient Sound Channel, RC-2 Resilient Sound Channel, DWC Hat Furring Channel, Z-Furring Channel, Metal, Vinyl and

Paper Beads & Trims

05400 054000 Cold Formed Metal Framing

Structural Studs and Tracks, Heavy Gauge Angle Runner and Cold Rolled Channel

09210 092300 Gypsum Plaster

Stucco, Veneer & Plaster Beads & Trims, Diamond Mesh Lath, Self-Furring Diamond Mesh Lath, Metal, Vinyl and Paper Faced

Beads & Trims

09215 092613 Gypsum Veneer Plaster

Stucco, Veneer & Plaster Beads & Trims, Diamond Mesh Lath, Self-Furring Diamond Mesh Lath, Metal, Vinyl and Paper Faced

Beads & Trims

09250 092900 Gypsum Board Metal, Vinyl and Paper Faced Beads & Trims

09265 092116.23Gypsum Board

Shaftwall Assemblies

I-Stud, J-Track, Hemmed H-Stud, U-Track, Metal, Vinyl and Paper Faced Beads & Trims

Our Mission: Lead the industry in delivering innovative products and services that add value to our customers and build their long-term success.

Phillips Diamond Mesh Lath

3

I-Stud

Tabbed J-Track

I-STUDS & FIRE RATED ASSEMBLIES

2-1/2", 4" or 6"

Drawing not to scale

2-1/4" or 3" Leg

2-1/2", 4" or 6"Drawing not to scale

Phillips I-Stud for Fire Rated Cavity Shaftwall/Stairwell Assemblies: » Simple 2-piece system (unlike competitors 3-piece system) » Tested in accordance with following ASTM standards:

» ASTM E-119 Fire Endurance Ratings » ASTM E-90 Sound Transmission Loss » ASTM E-72 Transverse Load Test

» Listed with following nationally recognized evaluation services: » ICC ES, Inc. Legacy Reports: 89-35.01, 95-25B, ER-3579, ER-4924 » UL Designs: U497, U498, U499, V433 » Intertek (Warnock Hersey) Designs: PMC/WA 60-01, PMC/WA 120-01,

PMC/WA 120-02, PMC/WA 180-01 » Additional designs and test results available at:

» www.PHILLIPSmfg.com » GA-600 Gypsum Association Fire Resistance Design Manual

"Engineered to Perform"

* 6” available in 20 gauge only

4

Hemmed H-Stud

U-Track

ASW Clips

AREA SEPARATION WALL

2"

The fire-protection of Area Separation Walls provided protection to the adjacent townhomes.


2"


5

Knurled Angle Runner 90o Cold Rolled Channel

Drawing not to scale Drawing not to scale

RC-1 Tru 25® Gauge Resilient Sound Channel

RC-2 (Two Leg Resilient Sound Channel)


DWC Hat Furring Channel Z-Furring Channel


Conventional Metal Studs Conventional Metal Tracks


Flat Strap (Flat Stock)

METAL CHANNELS & INTERIOR FRAMING

90

3/4" or 1-1/2"

7/8"

1-5/8", 2-1/2", 3-5/8", 4" or 6" 1-5/8", 2-1/2", 3-5/8", 4" or 6"

1", 1-1/2" or 2"


Phillips Interior Framing Products: » RC-2 Resilient Sound Channel has expanded metal for quality

sound control and hemmed edges for ease of installation » Studs and Tracks are roll-formed from corrosion resistant

galvanized steel » Studs have pre-punched knockouts for easy installation

6

Diamond Mesh Lath

Self-Furring Diamond Mesh Lath

METAL LATH

MasterFormat (95 Version)

MasterFormat (04 Version) Section Title Phillips Products Applicable

09210 092300 Gypsum Plaster

Diamond Mesh Lath and Self-Furring Diamond Mesh Lath

Phillips Metal Lath: » Manufactured to specified weight with hot-dipped galvanized steel » Use with complete confidence in all applications


7








STUCCO, VENEER, PLASTER BEADS & TRIMS

8

Phillips Metal Beads and Trims: » Strong, dent resistant corner and edge reinforcements » Durable, economical and straighter corners » Deeply knurled mud anchors on flanges


Metal Corner Bead Splay Corner Bead


Bullnose Corner Bead Bullnose Splay Corner Bead


Bullnose Door & Window Bullnose J-Round


Bullnose Kerf 093 Expansion Control Joint


U-200 Trim L-200 Trim


J-400 Trim (Reveal Trim)


METAL BEADS & TRIMS

Open Angle

1-1/4" x 1-1/4"

Open Angle

1-1/2" Radius 7/8"

7/8"3/4" Radius

1/2" or 5/8"

Removable Tape

1/2" or 5/8"

1/2" or 5/8"

1/2" or 5/8"

Hemmed EdgesFor Easy Slip-onApplication

7/8"

7/8"

1-1/2" Radius

3/4" Radius

7/8"1-1/2" Radius

3/4" Radius 7/8"

1-1/4" x 1-1/4"

9

Phillips gripSTIK® Vinyl Products: » Textured and knurled to enhance joint compound adhesion » Durable, impact and corrosion resistant » Tapered flanges for seamless finish work


Drawing not to scale Drawing not to scale Drawing not to scale





VINYL BEADS & TRIMS

1"

1"3/8" Radius

3/4" Radius 7/8"

1-1/2" Radius

Notched Flange

7/8"1-1/2" Radius

3/4" Radius

7/8"

3/8" Radius1"

Open Angle

7/8"

1/4", 3/8", 1/2", 5/8" or 3/4" 3/8", 1/2" or 5/8"

1" 1"

1/4", 3/8", 1/2" or 5/8"

Tear Off

3/4" Radius

1-1/2" Radius7/8"

7/8"

Open Angle

1-1/4" x 1-1/4"

1-1/2" Radius

3/4" Radius

7/8"

7/8"

3/8" Radius1"

1-1/4" x 1-1/4" 1-1/4" x 1-1/4"Notched Flange

10

Phillips kwikSTIK® Paper Faced Products: » No edge cracking » Patented paper prevents balling when sanding

Phillips kwikSTIK® Paper Faced Tape-On Products: » No nail pops and no call backs » No fasteners or nails needed for installation



P1 XW EL (PEW) P1 Micro Bead (PIM) No Bead P1 X EL NB (P1N)


No Bead Super Wide (PNB) P1-OS Splay (PSS) SLOK (PBT)


SLOK-OS (PAT) 3/4” Southwestern Bullnose (PST) 1-1/2” Bullnose (PHT)


1-1/2” Bullnose Splay (PJT) SLOK-N (PBN) SLOK-NXW (PEN)


SLOK-NOS (PAN) P2 (PIC) P2-OS (PSI)


P4 L-Trim (PL1/PL5)


7/8"

5/8" 11/16"

1-1/16"

5/8"7/8"

Open Angl e

7/8" 3/4"Radius 5/8"

1" 3/4"Radius

5/8"

Open Angle

7/8" 3/4"Radius 9/16"

1-1/2"Radius1" 3/4"

1" 3/4"1-1/2"Radius

Open Angle

5/8" 3/4"Radius

7/8" 3/4"Radius

3/4"Radius

1-1/16"

Open Angle

1-1/4"1"1/2"

1-1/4"7/8"

5/8"

PAPER FACED BEADS & TRIMS

5/8"

13/16"

11

Phillips RollPRO® Paper Faced Flexible Corner Trim: » Flex to any corner angle » Perfect for irregular drywall intersections » Quick professional finish


Paper faced corrosion resistant flexible vinylQuick professionally finished inside and

outside cornersProprietary high strength paper with durable fibers

promotes high wet and tear strengthSmooth consistent finishes with superior

mud and paint adhesion

Perfect for irregular drywall intersections

2-3/4” Width100’ Length

30.48m 69.85mm

Quick-Grab Handle

Product Dispenser

PAPER FACED FLEXIBLE CORNER TRIM

2-3/4” RollPRO® Paper Faced Trim

3-1/4” RollPRO® Paper Faced Trim

Quick-Grab Handle

Product Dispenser

ARCHITECT PRODUCT SPEC GUIDE · Structural Studs and Tracks, Heavy Gauge Angle Runner and Cold...

Documents

Transcript of ARCHITECT PRODUCT SPEC GUIDE · Structural Studs and Tracks, Heavy Gauge Angle Runner and Cold...