Post on 19-Apr-2020
Qua
tro re
serv
es th
e rig
ht to
mod
ify a
ny s
peci
ficat
ions
, at a
ny ti
me
with
out p
rior n
otic
e.FEATURESOnLine Filter Cleaning Function*Operate the mill overnight while the filters clean themselves
HEPA Filter99.97% efficiency on submicron particles (zirconium dust)
AutoFlowSet to lowest acceptable speed, motors automaticallyspeed up to overcome pressure increase
Temporary ONClean your mill while iVAC is in standby mode
Hybrid INFINITY motorsSeparate access doors*Allow you to remove debris without having to access filter section
Silent OperationQuietest units on the market (50-55dbA)
* iVAC units only
CELEB
RATING
OF EXCELLE
NCE
1991-2016
CAD/CAM DENTALDUST COLLECTORS
FOR MILLING MACHINESAIR TECHNOLOGIES INC.
1-877-9-QUATROquatroair.com
DUST COLLECTORSFOR DENTAL CADCAM MILLING MACHINES
JetStream CadCamJHL-5293
Part number Voltage / Current H x W x L, Weight Debris Storage Hose Diameter (1) Air Flow
100-120 / 5-8 13.5x16x14.25 in, 36 lbs up to 4 US gallons 1.5” up to 130 CFMJHL-5293-25 200-240 / 3-4 343x407x362 mm, 16 kg up to 15 litres (38mm) up to 221 m3/h
iVAC CadCamiVL-311-16 100-120 / 5-8 22x15x20 in, 65 lbs up to 4 US gallons 1.5” up to 130 CFMiVL-311-25 200-240 / 3-4 559x381x508 mm, 30 kg up to 15 litres (38mm) up to 221 m3/h
iVAC TWIN CadCamiVTL-311-16 100-120 / 9-12 29x15x20 in, 85 lbs up to 7 US gallons 1.5” up to 260 CFMiVTL-311-25 200-240 / 5-6 737x381x508 mm, 39 kg up to 26 litres (38mm) up to 442 m3/h
(1) Units are shipped with a 6-foot hose (~2m). Custom air inlets and hoses are available upon request.
HEPA Filter
YES
YES
YES
iVAC CadCam· For medium milling and general purpose use· Fully automatic filter cleaning
iVAC TWIN CadCam· For heavy duty/continuous milling and general purpose use (larger debris storage chamber)· Fully automatic filter cleaning
JetStream CadCam· For light intermittent milling and general purpose use· Equipped with large filter bag· Economical, for first time lower volume users
C a d C a m · S E R I E S
AIR TECHNOLOGIES INC.
Quatro reserves the right to modify any specifications, at any time without prior notice.
Since every milling machine is different, all standard "CadCam" models include a specific cable and air hose which allows for a seamless, automatic and user-friendly operation with your milling machine.
At time of order, please indicate manufacturer of milling machine used,we will supply specific Auto Start-Stop cable/hose AT NO ADDITIONAL COST!
Milling MachinesCadBlu · ImesJensen · VHFRoland DWX-4 / DWX50ZirkonZahnLAVA (3M ESPE)Weiland · Yenadent
When placing order, please indicate make and model of your milling
machine