Accessories

Splash! CaddieThe Splash! Caddie facilitates handling, transporting

and storing a Splash! aquatic lift. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash!

Caddie helps to protect both your investment and your staff. The Caddie simplifies both insertion and removal of the connector shaft into the insert

in the pool deck and becomes a convenient storage rack for the lift when not in use.

Spine Board Attachment

The Spine Board Attachment works with anystandard spine board (not included). Simplyremove the chair assembly by pulling theattachment pin and replace that assemblywith the spineboard attachment. One personcan easily extract an injured swimmer from apool, keeping the injured person fully supineduring the procedure.

Protect your investment with a full, all-weathercover. Custom fitted for both the PAL-PortableAquatic Lift and the Splash!. The cover is madefrom rugged blue nylon cordura.

All-Weather Covers

“Pal” cover

“Splash!” cover

Arm Rests/Foot Rest Deck AnchorRemovablestainlesssteel armrests andfoot rest forincreasedsense ofsecurity.

For Both PAL & Splash! Pool Lifts

Manufactured by:

RehaMedInternational, LLC.14008 SW 140th Street

Miami, FL 33186 800-577-4424

Tel: 305-255-1400 Fax: 305-969-2155

www.poollifts.com

Leg ExtensionExtended legrest facilitatesdeck clearance,especially withlifts used withspas.

For Both PAL& Splash!Pool Lifts

Standard 6” deep x 1.9” diameter.

For Splash!Pool LiftsOnly