Accessories - CEM Sales & Service · pool, keeping the injured person fully supine during the...
1
Accessories Splash! Caddie The Splash! Caddie facilitates handling, transporting and storing a Splash! aquatic lift. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash! Caddie helps to protect both your investment and your staff. The Caddie simplifies both insertion and removal of the connector shaft into the insert in the pool deck and becomes a convenient storage rack for the lift when not in use. Spine Board Attachment The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the spineboard attachment. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure. Protect your investment with a full, all-weather cover. Custom fitted for both the PAL-Portable Aquatic Lift and the Splash!. The cover is made from rugged blue nylon cordura. All-Weather Covers “Pal” cover “Splash!” cover Arm Rests/Foot Rest Deck Anchor Removable stainless steel arm rests and foot rest for increased sense of security. For Both PAL & Splash! Pool Lifts Manufactured by: RehaMed International, LLC. 14008 SW 140th Street Miami, FL 33186 800-577-4424 Tel: 305-255-1400 Fax: 305-969-2155 www.poollifts.com Leg Extension Extended leg rest facilitates deck clearance, especially with lifts used with spas. For Both PAL & Splash! Pool Lifts Standard 6” deep x 1.9” diameter. For Splash! Pool Lifts Only
Transcript of Accessories - CEM Sales & Service · pool, keeping the injured person fully supine during the...
-
Accessories
Splash! CaddieThe Splash! Caddie facilitates handling, transporting
and storing a Splash! aquatic lift. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash!
Caddie helps to protect both your investment and your staff. The Caddie simplifies both insertion and removal of the connector shaft into the insert
in the pool deck and becomes a convenient storage rack for the lift when not in use.
Spine Board Attachment
The Spine Board Attachment works with anystandard spine board (not included). Simplyremove the chair assembly by pulling theattachment pin and replace that assemblywith the spineboard attachment. One personcan easily extract an injured swimmer from apool, keeping the injured person fully supineduring the procedure.
Protect your investment with a full, all-weathercover. Custom fitted for both the PAL-PortableAquatic Lift and the Splash!. The cover is madefrom rugged blue nylon cordura.
All-Weather Covers
“Pal” cover
“Splash!” cover
Arm Rests/Foot Rest Deck AnchorRemovablestainlesssteel armrests andfoot rest forincreasedsense ofsecurity.
For Both PAL & Splash! Pool Lifts
Manufactured by:
RehaMedInternational, LLC.14008 SW 140th Street
Miami, FL 33186 800-577-4424
Tel: 305-255-1400 Fax: 305-969-2155
www.poollifts.com
Leg ExtensionExtended legrest facilitatesdeck clearance,especially withlifts used withspas.
For Both PAL& Splash!Pool Lifts
Standard 6” deep x 1.9” diameter.
For Splash!Pool LiftsOnly
