Post on 18-Jul-2018
ABOUT US 94,000 sq.ft. of manufacturing space on 12 acres 57 - Welding Machines 7 - Plasma Cutters 6'x10' CNC Plasma Table 6'x24' Dual Gantry CNC Plasma Cutter 18 - Forklifts 5 - CNC Press Brakes 15 - Overhead Bridge Cranes 14 - Single Beam Hoists Rolloff floor assembly line Automated Robotic Shear, that cuts sheets in a 35 second cycle time State of the art computer controlled small box assembly line, capable of producing
completed 2 yarders in less than 5 minutes 32,000 sq.ft. Painting Facility with 1 - 20'x 80' & 2 - 20'x 40' paint booths Small can paint assembly line for lids & decals 82 employees Manufacturing is piped for bulk welding gas We process 57.5 tons of Prime Steel per day We can produce up to 400 Small Boxes (1’s thru 10’s) & 50 Rolloffs per week 11 - Semi Tractors, pulling 53' Step Deck Trailers, 1 - 48' Van Trailer & 3 – Boom Trucks
2
ADDITIONAL INFORMATION
Delivery prices are quoted F.O.B. Poynette, Wisconsin 53955
Terms: Net 30 days with approved credit. We reserve the right to charge 1.5% in late charges on all invoices & 3% on all Credit Card purchases
Over 45 stock paint colors. Custom colors available upon request. All containers are primed inside & out using an enamel primer, and finished outside with an enamel topcoat. Supplied by SHEBOYGAN PAINT CO. (No water based paint used)
Lids: Single‐wall, vacuum formed HDPE plastic. Supplied by IMPACT PLASTICS
Quoted prices do not include delivery, state or local taxes unless noted on quote
Custom orders accepted ‐ Please call for prices
Unless stated otherwise in writing, container sizes indicated on sales literature are nominal sizes. Actual volume may vary from nominal sizes.
All containers meet or exceed A.N.S.I. Standards Z 245.30
All containers have D.O.T‐C2 Reflective Tape on front, back & sides
REAR LOADS
3
Capacity Lids WxL Weight (Approx.) 1 Cubic Yard w/Casters 2-31”x30” 345 lbs. 1½ Cubic Yard w/Casters 2-31”x38” or 1-62½”x38” 385 lbs. 2 Cubic Yard w/Casters 2-31”x44” or 1-62½”x44”
(Non-Stacking 2-31”x38” or 1-62½”x38”) 460 lbs.
3 Cubic Yard w/Casters & Pan 2-31”x38” or 62½”x38” 640 lbs. 3 Cubic Yard w/Casters Back 2-31”x30”
Front 2-31”x38” or 1-62½”x38” 670 lbs.
4 Cubic Yard 4-31”x38” or 2-62½”x38” 880 lbs. 6 Cubic Yard 6-31”x38” or 3-62½”x38” 1,180 lbs. 8 Cubic Yard 6-31”x38” or 3-62½”x38” 1,320 lbs. 10 Cubic Yard 6-31”x38” or 3-62½”x38” 1,495 lbs.
STANDARD CONSTRUCTION True to Gauge, Prime 12 gauge body & floor panels All body panels are fully welded, with fully welded 10 gauge bumpers Three 1½”H x 3”W structural bottom channels on 4yds & larger All exterior channel is structural (No formed channel is used) 1” Dia. solid steel rear lift hooks ¾” Dia. pull handles welded to front of container, standard on 3yds & up One ¾” Dia. threaded drain with plug per container 1½” Dia. Solid steel trunion bar on 1-3yd containers & 1¾” Dia. on 4yds & larger Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics ½” Dia. Zinc plated steel lid rods with Nylock nuts on one end Steel serial # tag welded on all containers 6” Dia. Polyolefin casters with greaseable roller bearings on 1-3yds (2-Swivel & 2-Rigid) Industrial enamel primer & paint supplied by Sheboygan Paint Co. Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
2yd Rear Load with Casters 4yd Rear Load
REAR LOAD DIMENSIONS
4
1yd Non‐Stackable 1.5yd Stackable
1.5yd Non‐Stackable 2yd Stackable
2yd Non‐Stackable 3yd Stackable 2‐Lid or 4‐Lid
Outside container Width 78” including trunion (not including trunion bar is 63”W)
Casters add 8¾” to container Height
REAR LOAD DIMENSIONS
5
4yd Stackable
6yd Stackable
8yd Stackable
10yd Stackable
Outside container Width 78” including trunion (not including trunion bar is 63”W)
FRONT LOAD PLASTICS
6
STANDARD CONSTRUCTION • Replaceable plastic tub with two 2” Dia. drains with plugs • Tub colors are: Brown, Gray, Green, Red, Black, & Dark Blue • 12 Gauge steel frame with 10 gauge 8”H x 24”L pockets • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end on 3-4yds, ¾” Dia. Plastic lid rod on 2yds • 6” Dia. Polyolefin casters with greaseable roller bearings (2-Swivel & 2-Rigid) • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning
decals, D.O.T. Reflective Tape & any Customer supplied decals (see decal plate size below) • 10 Year Warranty, see pg. 36 for details
OPTIONS INCLUDE: 22”Hx27”W Decal Plate or Tow Kit
Capacity Lids Weight (Approx.) H x W x D 2 Cubic Yard w/Casters 2-38”Wx41”L 367 lbs 53” x 81½ ” x 45” 3 Cubic Yard w/Casters 2-37”Wx54”L 472 lbs 62” x 81½ ” x 56” 4 Cubic Yard w/Casters 2-36”Wx58”L 560 lbs 72” x 81½ ” x 58”
2yd Front Load Plastic 2yds Easily Stack for Storage
3yd Front Load Plastic 4yd Front Load Plastic
3yd Front Load Plastic
4yd Front Load Plastic
FRONT LOADS
7
Capacity Lids WxL Weight (Approx.) 1 Cubic Yard w/Casters 2-36”x33” 395 lbs1½ Cubic Yard w/Casters 2-36”x33” 420 lbs2 Cubic Yard w/Casters 2-36”x41” 480 lbs3 Cubic Yard w/Casters 2-36”x47” 520 lbs4 Cubic Yard 2-36”x47”
(2-36”x57” on Stackable) 680 lbs
6 Cubic Yard 2-36”x57” 860 lbs8 Cubic Yard 2-36”x57” 1,020 lbs10 Cubic Yard 2-36”x57” 1,170 lbs
STANDARD CONSTRUCTION True to Gauge, Prime 12 gauge body & floor panels All body panels are fully welded, with fully welded 10 gauge bumpers Lift pockets on 1-4yd are: 10 gauge x 8”H x 24”L. 6-10yd are: 7 gauge x 8”H x 30”L All are fully welded, including leads, gussets, dirt shedders, & fork deflectors at the back 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service One ¾” Dia. threaded drain with plug per container All containers come with pickup points for booming containers on site ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics Steel serial # tag welded on all containers 6” Dia. Polyolefin casters with greaseable roller bearings on 1-3yds (2-Swivel & 2-Rigid) Industrial enamel primer & paint supplied by Sheboygan Paint Co. Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
8yd Front Load 2yd Front Load w/Casters & Optional Lock Bar
FRONT LOAD DIMENSIONS
8
1yd Stackable 1.5yd Stackable
2yd Stackable 3yd Stackable
4yd Stackable 4yd Non‐Stackable
Outside container Width 84” including pockets
Casters add 8¾” to container Height
FRONT LOAD DIMENSIONS
9
6yd Stackable 6yd Non‐Stackable
8yd Stackable 8yd Non‐Stackable
10yd Non‐Stackable
Outside container Width 84” including pockets
FRONT LOADS LOW PROFILE & FLAT TOP
10
LOW PROFILE CONTAINERS FLAT TOP CONTAINERS
Capacity Lids WxL Weight (Approx.)
Capacity Lids WxL Weight (Approx.)
4 Cubic Yard 2-36”x47” 660 lbs 3 Cubic Yard 2-36”x47” 340 lbs 4 Cubic Yard 4-36”x41” 700 lbs 4 Cubic Yard 2-36”x57” 640 lbs
6 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 890 lbs
6 Cubic Yard 2-36”x57” 4-36”x41”
860 lbs
8 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,040 lbs
8 Cubic Yard 54”H
2-36”x57” 4-36”x41”
1,020 lbs
10 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,290 lbs
8 Cubic Yard 72”H
2-36”x57” 4-36”x41”
1, 030 lbs
10 Cubic Yard
2-36”x57” 4-36”x41”
1, 170 lbs
STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge body & floor panels • All body panels are fully welded, with fully welded 10 gauge bumpers • Lift pockets on 1-4yd are: 10 gauge x 8”H x 24”L. 6-10yd are: 7 gauge x 8”H x 30”L.
All are fully welded, including leads, gussets, dirt shedders, and fork deflectors at the back • 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are
less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service
• One ¾” Dia. threaded drain with plug per container • All containers come with pickup points for booming containers on site • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • Steel serial # tag welded on all containers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including:
Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
4yd Front Low Profile 2-Lid w/Lid Stop 4yd Front Load Flat Top 2-Lid
*Flat Top Containers available without Lids
FRONT LOAD LOW PROFILE DIMENSIONS
11
4yd Low Profile 2‐Lid 4yd Low Profile 4‐Lid
6yd Low Profile 8yd Low Profile
10yd Low Profile Outside container Width 84” including pockets
FRONT LOAD FLAT TOP DIMENSIONS
12
3yd Flat Top 4yd Flat Top
6yd Flat Top 8yd 54”H Flat Top Tapered for Stacking
8yd 72”H Flat Top 10yd Flat Top Tapered for Stacking
Outside container Width 84” including pockets
FRONT LOADS BARN/DOCK
13
Capacity Lids WxL Weight (Approx.) 8 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,020 lbs 10 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,170 lbs
STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge body & floor panels • All body panels are fully welded, with fully welded 10 gauge bumpers • Lift pockets are 7 gauge x 8”H x 30”L, that are fully welded, including leads, gussets, dirt shedders, and fork deflectors at the back • 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service • One ¾” Dia. threaded drain with plug per container • All containers come with pickup points for booming containers on site • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • Steel serial # tag welded on all containers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
8yd Barn/Dock 10yd Barn/Dock Outside container Width 84” including pockets
8yd Front Load Barn 8yd Front Load Barn w/Lid Stop
RESIDENTIAL CARTS & CARRY CANS
14
CAPACITY H x W x L 18 Gallon 13⅜" x 26⅛" x 16" 35 Gallon 38½" x 19" x 22¼" 65 Gallon 42⅛" x 25¼" x 26⅜" 95 Gallon 46¾" x 26⅜" x 33¾"
STANDARD CONSTRUCTION • Water tight lid design eliminates leaking & reduces odor • One-piece attached lid requires no assembly • Multi-system design includes lifter pocket to fit all lifter types • Stronger walls increase cart durability & wind stability, up to 40mph • Dual reinforced wear strip designed to extend the life of carts underside • 10” Rubber wheels on 95 & 65 Gal., and 10” Plastic wheels on 35 Gal. carts for easy
mobility, greater stability, & more durability • Available with Recycle logo or company logo hot stamped on sides
95, 65 & 35 Gallon Carts 18 Gallon Bin
3yd Front Load Plastic 4yd Front Load Plastic
STANDARD CONSTRUCTION • Available with side, front, corner tipper mount,
or with no provision for tipper • Fully gusseted • Industrial enamel primer & paint • Containers are delivered completely
assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
DOCK CARTS
15
Capacity H x W x L 1 Cubic Yard w/Casters 46⅛” x 27½”x 64⅝” 1½ Cubic Yard w/Casters 46⅛” x 38½” x 64⅝” 2 Cubic Yard w/Casters 46⅛” x 49½” x 64⅝”
STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge Body & Floor panels • 3” Formed channel and wrapped corners • ¼“ Thick bump plates and outriggers • Dump & Push handles • 6” Dia. Polyolefin casters with greaseable roller bearings (2-Rigid & 1-Swivel)
• Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
Front Back
Custom Sizes Available
SELF DUMPING HOPPERS
16
Capacity H x W x L Weight (Approx.)
¼ Cubic Yard 24½“ x 33” x 38½“ 436 lbs ½ Cubic Yard 30” x 41¼” x 48¼” 514 lbs ¾ Cubic Yard 37¾” x 35¼” x 66¼” 592 lbs 1 Cubic Yard 38” x 45¼” x 66¼” 670 lbs 1½ Cubic Yard 38” x 59¼” x 66¼” 750 lbs 2 Cubic Yard 52⅜” x 59¼” x 66¼” 830 lbs 3 Cubic Yard 59½” x 68” x 68¾” 990 lbs 4 Cubic Yard 59½” x 87” x 68¾” 1,100 lbs 5 Cubic Yard 59½” x 102” x 68¾” 1,290 lbs 6 Cubic Yard 69¼” x 102” x 68¾” 1,480 lbs
STANDARD CONSTRUCTION • 10 Gauge construction • Safety chain to tie off on fork mast included on all • Positive locking mechanism • Will not jump off track • 3½”H x 8”W fork pockets • Hoppers ¼ -2yd are stackable • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning
decals, D.O.T. Reflective Tape & any Customer supplied decals OPTIONS INCLUDE:
• Casters – Polyolefin or Steel (2-Rigid & 2-Swivel) • Upgrade to 8 gauge construction • Push Handle • Angle Iron around top edge
Custom Sizes Available
SCRAP BINS & TOTES
17
Capacity H x W x L 2 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 40” 3 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 60” 4 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 82”
CONSTRUCTION • Endless choices of size & shape, depending on application • Endless variety of construction specs., depending on application • Can be built stackable • Your choice of polyolefin, polyurethane, or steel casters • Industrial enamel primer & paint. • Containers are delivered completely assembled & ready for use. Including:
Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
Stackable Bin with Casters Stackable Bin with Front Door
3yd Front Load Plastic 4yd Front Load Plastic
Stackable Bin
Stackable Bin
Custom Sizes & Styles Available
PARTS INFORMATION
18
SMALL CAN PARTS Caster Pad Single Plastic Lids – See pg. 3,6,7,10 & 11
for Sizes Std. 6” Dia. Polyolefin Caster, Swivel or Rigid
Double Wide Plastic Lids – See pg. 3, 6, 7,10 & 11 for Sizes
6” Dia. Polyolefin Caster, Swivel w/Cam lock
Side Open Plastic Lid - 36”Wx57”L
6” Dia. All Steel Caster or Rubber Wrapped Steel
Double Wall Side Open Lids – 35”Wx56”L & 36”Wx46”L
Lid Rod– ½“ Dia. Zinc plated: Front Load- 75½”L or Rear Load-65”L
Galvanized Steel Lid Steel Sliding Bear Lid
Side Open Hinge Assembly w/Lid Rod Steel Frame w/Plastic Bear “Resistant” Lid Sliding Back Door w/Track Kit- 30”Hx30”W Lid Stop Front Load Manual lock Lid Tab Front Load Autolock- See pg. 32 for Details Rear Load Rack – 4yd, 6yd & 8yd Rear Load Flatbar or Chain Lock Front Load Pocket Assembly Corner Cap Weld & Bolt-on Tow Kit Drain Plug Decal Plate for FL Plastic 22”Hx27”W Small Can Decal Set: 8-DOT Reflective Squares, 1-Large Caution/Warning Decal, 2-Small Caution/Warning Decals
Front Load Plastic Frame Only Front Load Plastic Tub Only
ROLLOFF, RECEIVER & LUGGER PARTS 1⅜” Bullnose 2” x 6” Tube (skid) 20’ Long 1¾” Cable Hook & ¾” Plate Nose Roller w/Axle 4”Dia.x4”W or
4”Dia.x6”W (Front) ⅝” A-frame Hook Plate ½” Nose Roller Support 2½” A-Frame Pin/Bar Bogey Wheel w/Axle 8”Dia.x10”W or
8”Dia. x6”W (Rear) Complete A-frame Std. 62”H or 54”H ½” Bogey Wheel Plate Complete 36” Hook w/Plate 5’x7’ Receiver Diaper Deadlift Skid Nose Custom Vinyl Lettering Deadlift Casting Lugger Pin w/Ear Swing Latch Assembly ½” Lugger Pin Support Plate Ratchet Lugger Ear Sand Pads (set) Large Can Decal Set: 8-DOT Reflective
Squares, 1-Large Caution/Warning Decal, 2-Small Caution/Warning Decals, 2-Ladder Warning Decals, 1-Caution Door Decal, 2-Do not fill above this line Decals,2-Do not Park Decals
Rolloff Hinge 40yd 4/Box, 30yd 3/Box & 20yd down 2/Box 2½“W Flat Door Seal- 20ft. Roll
Replacement Rolloff Door
SQUARE/RECTANGLE ROLLOFFS
19
STANDARD CONSTRUCTION • 3/16” Floor, 20 ft. outside length (Custom lengths available) • 12 Gauge sides, front & door • Top reinforcing 3”x4”x3/16” tubing, 2”x6”x3/16” front uprights, and fully welded top corner gussets • 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center • ¾” Dia. solid tarp rails, with tarp hooks front & rear • ¾” Dia. solid ladders, standard placement is front corner driver side & rear corner passenger side • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing upright on the hinge side, 2”x3”x3/16” tubing on the latch side, and 2”x3”x3/16” tubing horizontal cross-members (No formed channel) • Doors are on top of floor and come with a door sweep to prevent nails & shingles, ect. from falling out during transport. Guide support latch side of door • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface. 20yd & under: 2 hinges, 30yd: 3 hinges, and 40yd & up: 4 hinges • Door safety chain uses a heavy-duty quick snap with both, Swing Lever or Ratchet latch system. (Safer & more user friendly)
Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift See pg. 21 for Heavy-duty Construction Upgrades & other Options
30yd Square Rolloff, Cable 30yd Square Rolloff w/Decal Plate
ANGLE/TUB ROLLOFFS
20
STANDARD CONSTRUCTION • 3/16” Floor, 20 ft. outside length (Custom lengths available) • 12 Gauge door & front with: 20yd & under: 10 gauge sides, 25yd & up: 7 gauge sides • Tapered construction for easier dumping • Top reinforcing 3”x4”x3/16” tubing, 2”x6”x3/16” front uprights, and fully welded top corner gussets • Choice of ¼” flat or ¾” Dia. ladder rung style tarp rails, with tarp hooks front & rear • ¾” Dia. ladder rung style, standard placement is front corner driver side & rear corner passenger side • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing upright on the hinge side, 2”x3”x3/16” tubing on the latch side, and 2”x3”x3/16” tubing horizontal cross-members (No formed channel) • Doors are on top of floor and come with a door sweep to prevent nails & shingles, ect. from falling out during transport. Guide support latch side of door • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface. 20yd & under: 2 hinges, 30yd: 3 hinges, and 40yd & up: 4 hinges • Door safety chain uses a heavy-duty quick snap with both, Swing Lever or Ratchet latch
system. (Safer & more user friendly) Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift
See pg. 21 for Heavy-duty Construction Upgrades & other Options
20yd Angle Rolloff, Hook & Cable 40yd Angle Rolloff with Belly Band, Deadlift
ROLLOFF OPTIONS
21
Combination Cable/Hooklift
Combination Deadlift/Hooklift
¼” Floor
12” on Center Floor Channel
22' Long container (Std. Length 20’)
24' Long container (Std. Length 20’)
Upgrade Angle from 10 gauge to 7 gauge Walls
Upgrade Square from 12 gauge to 10 gauge Walls
Upgrade Square from 12 gauge to 7 gauge Walls
Front Ground Rollers
Front Sand Pads
2”x5” Skids with 1”x2” Solid Wear Strips
Lined Skids ¼” x 2”
Inside Wall Gussets
2”x2” Angle on top of Wall
Decal Plates
Gravel Guards (dirt shedders)
Ratchet Door Latch System
Heavy-duty Sealed Door
Heavy-duty Sealed Door w/Fluid Ramp
Barn Style Door/Dump Style Tail Gate
Single-sided Cover with 3 Plastic Lids
Double-sided Cover with 6 Plastic Lids
Removable Steel Cover w/Fork Pockets
Rollover Tarp System
Counter Balanced Cover
Belly Bands on Angle Rolloffs
RECYCLING ROLLOFFS
22
AVAILABLE OPTIONS • Choose a design to meet your requirements • See Angle/Tub or Square/Rectangle Rolloff for container specs. • Choose Single-sided or Double-sided covers • Add interior dividers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including:
Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
SQUARE RECEIVERS
23
STANDARD CONSTRUCTION • 3/16” Floors, length determined by capacity • 12 Gauge sides, front, door & roof • Tapered construction for easier dumping • 3”x5”x3/16” Structural tubing used for back channel and roof supports • 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center for side & roof stiffeners • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • Drain holes (through floor) under each side channel • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing uprights & horizontal cross-members (No formed channel) • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface • Guide support latch side of door • Door safety chain uses a heavy-duty quick snap with Ratchet latch system • Sealed Doors & Sealed Charge Opening doors available upon request • Pinning Tunnels & Bars are available upon request
Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift
40yd Square Receiver, Cable 40yd Square Receiver with Optional Charge Door
OCTAGON RECEIVERS
24
STANDARD CONSTRUCTION • 3/16” Floors, length determined by capacity • 8 Gauge sides, front, & roof • 3”x5”x3/16” Structural tubing used for back channel and roof supports • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning
decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing uprights & horizontal
cross-members (No formed channel) • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface • Guide support latch side of door • Door safety chain uses a heavy-duty quick snap with Ratchet latch system • Sealed Doors & Sealed Charge Opening doors available upon request • Pinning Tunnels & Bars are available upon request
Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift
40yd Octagon Receiver Octagon Receiver w/Belly Bands, Cable & Hook
LUGGERS
25
STANDARD CONSTRUCTION • 3/16” Walls, ¼” Floors & Dump end • Corners wrapped with ¼” thick steel • 4” Channel around perimeter of container • 3” Channel floor stiffeners • 6” Channel at lift pins • ⅜” Lift pin support plates • 3/16” Side bump plates below lift pins • 1½” Dia. drain with plug • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
OPTIONS INCLUDE: Dump hooks, Butterfly drain valves, Rear doors, Fully Gusseted floor & Dump Ends, & Covers
Standard Lugger
Low Profile Lugger
High Back Lugger
Sludge Lugger
STORAGE CONTAINERS
26
20ft. Dimensions Outside: 20'Lx9'Hx8'W
Inside: 19'6”Lx7'6”Hx7'6”W
STANDARD CONSTRUCTION • Available in 20ft. or 40ft. lengths • Interior white walls & clean wood floor with tie down hooks • Water tight double locking doors & side fork pockets • Exterior industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift
OPTIONS INCLUDE: Side Service Door & Decal Plates
20ft. Container w/Service Door & Decal Plate 20ft. Storage Container
3yd Front Load Plastic 4yd Front Load Plastic
20ft. Storage Container, Hook
20ft. Container w/Rear Dump Door
FLATBEDS & DUMP BODIES
27
AVAILABLE OPTIONS ¼” Diamond Plate 2”x5” Skids with1”x2” Liners 2’ or 3’ Beaver tail 8” Dia.x10”W Rear Rollers Rollers in Beaver Tail Bulkhead: Expanded or Solid Steel Chain Hangers on Bulkhead D-ring Tie Downs Tool Boxes & Power Winch Heavy-duty 2”x6” Outer Rail Tubes
STANDARD CONSTRUCTION • Available in any length, available in 96”W or 102”W • 3/16” Smooth floor • Side pockets with ½”x3” Rub rails on Flatbeds • Industrial enamel primer & paint • Containers are delivered ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
Understructure • 3”H Structural channel 18” on center, with full 2”x3”x3/16” apron on Dump Bodies & 2”x6”x3/16” on Flatbeds • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails
Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4”Dia.x6”W Front Rollers with grease zerks
& ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift
Dump Truck Body
Flatbed w/3ft. Beaver Tail & Solid Bulkhead
Dump Body, 54” Hook
Flatbed w/Mesh Bulkhead & 54”Hook
SCRAP TRAILERS
28
STANDARD CONSTRUCTION • ¼” Floor with 12” on center floor channel • 7 Gauge walls, front & door • 7 Gauge formed, 2 bend side channel 24” on center • Walls tied into rear bumper • 3”x4”x3/16” door tube • Inside gussets 12”H • 12”H Outside dirt shedders • Ratchet style door closer • Ladders on driver’s side front & rear passenger • Industrial enamel primer & paint • Trailers are delivered ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals
We have 48ft. trailers available, or you can supply your own.
48ft. Scrap Trailer w/Side Access Doors 48ft. Scrap Trailer w/6ft. Walls
3yd Front Load Plastic 4yd Front Load Plastic
48ft. Scrap Trailer w/5ft. Walls
48ft. Scrap Trailer w/7ft. Walls
AVAILABLE OPTIONS Inside Front Ramp Sidewinder Tarp System Ramp at rear floor to protect tail lights Solid Rear Door or Top half of Door
Expanded Steel Side Access Doors Decal Plates
AUTHORIZED STELLAR DEALER
29
From the first U.S. manufacturer of the Hooklift system, here’s how they set the industry standard:
• The single lift and tilt cylinders are used on all Stellar® Hooklift models ranging from 3,000‐52,000 pound capacities.
• All controls for the Stellar® Hooklift are mounted in the truck cab for operator safety and ease of operation.
• Grease zerks
• New hook design, makes attachment to bodies easier.
• The Stellar® Hooklift rugged rear body tie‐downs insure body stability when in transit and when dumping.
• The Stellar® Hooklift rear hinge pin is made of stainless steel to give extra strength and eliminate corrosion.
• Integrated control valve and hydraulic fluid reservoir with temperature gauge are standard on all Hooklift loaders.
• The Stellar® Hooklift features resettable dump/ tilt tabs.
• Stellar® Hooklift front saddles offer support while in transit and take the weight directly off the hook loading mechanism.
• All electrical wiring protected by heavy conduit.
• Rotary valve locks‐out tilt function while in dump mode to prevent accidental body off loading.
54 different uses of a Stellar® Hooklift:
Vacuum Sewer Cleaner Paint Striper Mobile Office Mosquito Sprayer Body Cone Placement Body Dumpster Transporter Scrap Steel Container Mobile Testing Laboratory Confined Space Access Body Street Flusher Tanker Body Sewer Jetter Concession Stand Water Tanker Body Chipper Body Utility Service Body Weed Sprayer Body Auto/Truck Retrieval Flatbed Water Main Relining Body Stationary Compactor Container
Berming Machine Body Snow Melting Body Pipe Repair Utility Body Asphalt Distributor Tanker Sign/Guardrail Maintenance Field Lube Body Hazmat Body Septic Tank Vacuum Body 6-8 Cu.yd. Side-Load Packer Underground Video Body Dump Body Hydraulic Wrecker Cable Reel Transport Body Emergency Electric Generator Emergency Electric Transformer Hopper Salt Spreader Compost Transport Portable Skating Rink Freezer
Drop Box For Street Sweepers Waste Water Sludge Body Stake Body Rear-loader Packer Concrete/Masonry Repair Catch Basin Cleaner Mobile Concrete Mixer Body Tub Shredder Body Refuse Container Disaster Command Center Flatbed With Aerial Bucket Mechanic’s Field Repair Body Van Body Leaf Vacuum Body Wastewater Skimmings Container Recycle Container Pothole Patcher
TRUCK EQUIPMENT
30
TARPS & TARPING SYSTEMS
TOOL BOXES & FENDERS
TESTIMONIAL
31
Poynette Iron Works is contributing to the efforts of science & experimentation in EXTREME weather conditions in Antarctica! Greetings from Antarctica- “All is well here. The economic slowdown has not affected us. In fact we are busier now because the stimulus money funded some new projects. On 8/31 we loaded two semi trucks with cargo bound for Antarctica. I will be leaving the first week of November this year. The Ice Box Chip Hopper & Container Lids held up great last season. The crew will be arriving in the Divide in a few weeks. Winters in the Divide are windy with temps. dipping to -60ºF.” “We met our goal this season of drilling through the brittle ice zone! The ice in this zone is so brittle, that it has to sit and relax for one year in a basement beneath the building. Before it can be shipped, back to the states, or it will crumble and be useless for science. “
“The Chip Hopper worked great! During 24 hour operation it needed to be dumped every third day, which is what I was shooting for. The equipment operators said
it was easy to handle and worked much better than the system we had last season. This is a quality piece that has been admired by many”
SERIO-US LOCK
32
33
41-930A
Walnut Brown Primer
43-1612C
White
43-2665B
Black
43-31317A Taylor Gray
43-31334A
Battleship Gray
43-31415A
Chrome Silver (Metal Flake)
43-31564 Light Gray
43-31639
Silver Gray (No Metal Flake)
43-31640 Total Gray
43-31891 ADS Grey
43-41172A
Laidlaw Blue
43-41283A Regal Blue
43-41284A
Poynette Blue
43-41355A N.S. Blue
43-41428B Allied Blue
43-41478
Purple
43-41484
Chicago Light Blue
43-41493
West Central Blue
43-41571
PMS#281 Blue
43-41603 Blue “C”
43-4899C Mack Blue
43-51299C WM Green
43-51300C
Veolia Green
43-51367A ARC Green
43-51370B
Valley Green
43-51628
John Deer Green
43-51726
Atomic Green
43-61773A Allis Orange
43-61849A
Advanced Yellow (Dark)
43-61858A
Service Master Yellow
43-62013A Van Yellow
43-62018A
Kubota Orange
43-62181
Container Orange
43-62245
Omaha Orange
43-62297
Orange Yellow
34
43‐7784
Bengal Tan
43‐81171C Burgundy
43‐81303C
Red
43‐81474A
Shoreline Red
43‐81524A Chilled Wine
43‐81549
Machinery Red
43‐81556 Bright red
43‐9331C Walnut
43‐9652A Van Brown
43‐9670
Ace Brown
35
POYNETTE IRON WORKS, INC. STEEL CONTAINERS LIMITED WARRANTY
POYNETTE IRON WORKS, INC. warrants only products of it’s manufacture against operational failure caused by defective material or workmanship, WHICH OCCURS DURING NORMAL USE FOR A PERIOD OF TWELVE (12) MONTHS FROM DATE OF SHIPMENT FROM OUR FACTORY. POYNETTE IRON WORKS, INC. will replace all parts of our manufacture free of charge that our inspection at our factory shows to us to be defective in accordance with the above paragraph. WRITTEN PERMISSION MUST BE OBTAINED FROM AUTHORIZED POYNETTE PERSONNEL FOR ANY REPAIRS PERFORMED OTHER THAN IN OUR FACTORY. All claims for reimbursement must be filed with proper documentation no later than forty-five (45) days after occurrence to be allowed. All products purchased by POYNETTE IRON WORKS, INC. from an outside vendor shall be covered by the warranty of that respective vendor only. POYNETTE IRON WORKS, INC. does not participate in or obligate itself to any such warranty. NO FREIGHT, TRAVEL COST, MEALS, OR LODGING SHALL BE COVERED BY THIS WARRANTY. All labor costs allowed shall be in accordance with POYNETTE IRON WORKS, INC. established rate. In case of alleged defect, product shall be returned to POYNETTE IRON WORKS, INC. with transportation charges prepaid. POYNETTE IRON WORKS, INC. makes no warranty on any of it’s equipment used in any way except as it was designed, intended, and sold to perform. This limited warranty is expressly in lieu of all other warranties, expressed or implied and of all other obligations or liabilities on the part of POYNETTE IRON WORKS, INC. and it neither assures nor authorizes any other person to assure for it any other liability. POYNETTE IRON WORKS, INC. does not assume any liability for loss of products, time, or any other consequential damages. All claims shall be processed through your POYNETTE IRON WORKS, INC. authorized dealer.
36
POYNETTE IRON WORKS, INC. COMMERCIAL PLASTIC INJECTION MOLDED CONTAINERS
LIMITED WARRANTY
POYNETTE IRON WORKS, INC. warrants only products of it’s manufacture against operational failure caused by defective material or workmanship, WHICH OCCURS DURING NORMAL USE FOR A PERIOD OF TEN (10) YEARS FROM DATE OF SHIPMENT FROM OUR FACTORY. POYNETTE IRON WORKS, INC. will replace all parts of our manufacture free of charge that our inspection at our factory shows to us to be defective in accordance with the above paragraph. WRITTEN PERMISSION MUST BE OBTAINED FROM AUTHORIZED POYNETTE PERSONNEL FOR ANY REPAIRS PERFORMED OTHER THAN IN OUR FACTORY. All claims for reimbursement must be filed with proper documentation no later than forty-five (45) days after occurrence to be allowed. All products purchased by POYNETTE IRON WORKS, INC. from an outside vendor shall be covered by the warranty of that respective vendor only. POYNETTE IRON WORKS, INC. does not participate in or obligate itself to any such warranty. NO FREIGHT, TRAVEL COST, MEALS, OR LODGING SHALL BE COVERED BY THIS WARRANTY. All labor costs allowed shall be in accordance with POYNETTE IRON WORKS, INC. established rate. In case of alleged defect, product shall be returned to POYNETTE IRON WORKS, INC. with transportation charges prepaid. POYNETTE IRON WORKS, INC. makes no warranty on any of it’s equipment used in any way except as it was designed, intended, and sold to perform. CAUTION – Plastic injection molded containers are not designed or expected to withstand applications where hot materials placed in or near the container may cause combustion of said container. This limited warranty is expressly in lieu of all other warranties, expressed or implied and of all other obligations or liabilities on the part of POYNETTE IRON WORKS, INC. and it neither assures nor authorizes any other person to assure for it any other liability. POYNETTE IRON WORKS, INC. does not assume any liability for loss of products, time, or any other consequential damages.