ABOUT US - Poynette Ironworks Inc. - Home€¦ · ABOUT US 94,000 sq.ft. of manufacturing space on...

ABOUT US 94,000 sq.ft. of manufacturing space on 12 acres 57 - Welding Machines 7 - Plasma Cutters 6'x10' CNC Plasma Table 6'x24' Dual Gantry CNC Plasma Cutter 18 - Forklifts 5 - CNC Press Brakes 15 - Overhead Bridge Cranes 14 - Single Beam Hoists Rolloff floor assembly line Automated Robotic Shear, that cuts sheets in a 35 second cycle time State of the art computer controlled small box assembly line, capable of producing

completed 2 yarders in less than 5 minutes 32,000 sq.ft. Painting Facility with 1 - 20'x 80' & 2 - 20'x 40' paint booths Small can paint assembly line for lids & decals 82 employees Manufacturing is piped for bulk welding gas We process 57.5 tons of Prime Steel per day We can produce up to 400 Small Boxes (1’s thru 10’s) & 50 Rolloffs per week 11 - Semi Tractors, pulling 53' Step Deck Trailers, 1 - 48' Van Trailer & 3 – Boom Trucks

2

ADDITIONAL INFORMATION

Delivery prices are quoted F.O.B. Poynette, Wisconsin 53955

Terms: Net 30 days with approved credit. We reserve the right to charge 1.5% in late charges on all invoices & 3% on all Credit Card purchases

Over 45 stock paint colors. Custom colors available upon request. All containers are primed inside & out using an enamel primer, and finished outside with an enamel topcoat. Supplied by SHEBOYGAN PAINT CO. (No water based paint used)

Lids: Single‐wall, vacuum formed HDPE plastic. Supplied by IMPACT PLASTICS

Quoted prices do not include delivery, state or local taxes unless noted on quote

Custom orders accepted ‐ Please call for prices

Unless stated otherwise in writing, container sizes indicated on sales literature are nominal sizes. Actual volume may vary from nominal sizes.

All containers meet or exceed A.N.S.I. Standards Z 245.30

All containers have D.O.T‐C2 Reflective Tape on front, back & sides

REAR LOADS

3

Capacity Lids WxL Weight (Approx.) 1 Cubic Yard w/Casters 2-31”x30” 345 lbs. 1½ Cubic Yard w/Casters 2-31”x38” or 1-62½”x38” 385 lbs. 2 Cubic Yard w/Casters 2-31”x44” or 1-62½”x44”

(Non-Stacking 2-31”x38” or 1-62½”x38”) 460 lbs.

3 Cubic Yard w/Casters & Pan 2-31”x38” or 62½”x38” 640 lbs. 3 Cubic Yard w/Casters Back 2-31”x30”

Front 2-31”x38” or 1-62½”x38” 670 lbs.

4 Cubic Yard 4-31”x38” or 2-62½”x38” 880 lbs. 6 Cubic Yard 6-31”x38” or 3-62½”x38” 1,180 lbs. 8 Cubic Yard 6-31”x38” or 3-62½”x38” 1,320 lbs. 10 Cubic Yard 6-31”x38” or 3-62½”x38” 1,495 lbs.

STANDARD CONSTRUCTION True to Gauge, Prime 12 gauge body & floor panels All body panels are fully welded, with fully welded 10 gauge bumpers Three 1½”H x 3”W structural bottom channels on 4yds & larger All exterior channel is structural (No formed channel is used) 1” Dia. solid steel rear lift hooks ¾” Dia. pull handles welded to front of container, standard on 3yds & up One ¾” Dia. threaded drain with plug per container 1½” Dia. Solid steel trunion bar on 1-3yd containers & 1¾” Dia. on 4yds & larger Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics ½” Dia. Zinc plated steel lid rods with Nylock nuts on one end Steel serial # tag welded on all containers 6” Dia. Polyolefin casters with greaseable roller bearings on 1-3yds (2-Swivel & 2-Rigid) Industrial enamel primer & paint supplied by Sheboygan Paint Co. Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

2yd Rear Load with Casters 4yd Rear Load

REAR LOAD DIMENSIONS

4

1yd Non‐Stackable 1.5yd Stackable

1.5yd Non‐Stackable 2yd Stackable

2yd Non‐Stackable 3yd Stackable 2‐Lid or 4‐Lid

Outside container Width 78” including trunion (not including trunion bar is 63”W)

Casters add 8¾” to container Height

REAR LOAD DIMENSIONS

5

4yd Stackable

6yd Stackable

8yd Stackable

10yd Stackable

Outside container Width 78” including trunion (not including trunion bar is 63”W)

FRONT LOAD PLASTICS

6

STANDARD CONSTRUCTION • Replaceable plastic tub with two 2” Dia. drains with plugs • Tub colors are: Brown, Gray, Green, Red, Black, & Dark Blue • 12 Gauge steel frame with 10 gauge 8”H x 24”L pockets • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end on 3-4yds, ¾” Dia. Plastic lid rod on 2yds • 6” Dia. Polyolefin casters with greaseable roller bearings (2-Swivel & 2-Rigid) • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning

decals, D.O.T. Reflective Tape & any Customer supplied decals (see decal plate size below) • 10 Year Warranty, see pg. 36 for details

OPTIONS INCLUDE: 22”Hx27”W Decal Plate or Tow Kit

Capacity Lids Weight (Approx.) H x W x D 2 Cubic Yard w/Casters 2-38”Wx41”L 367 lbs 53” x 81½ ” x 45” 3 Cubic Yard w/Casters 2-37”Wx54”L 472 lbs 62” x 81½ ” x 56” 4 Cubic Yard w/Casters 2-36”Wx58”L 560 lbs 72” x 81½ ” x 58”

2yd Front Load Plastic 2yds Easily Stack for Storage

3yd Front Load Plastic 4yd Front Load Plastic

3yd Front Load Plastic

4yd Front Load Plastic

FRONT LOADS

7

Capacity Lids WxL Weight (Approx.) 1 Cubic Yard w/Casters 2-36”x33” 395 lbs1½ Cubic Yard w/Casters 2-36”x33” 420 lbs2 Cubic Yard w/Casters 2-36”x41” 480 lbs3 Cubic Yard w/Casters 2-36”x47” 520 lbs4 Cubic Yard 2-36”x47”

(2-36”x57” on Stackable) 680 lbs

6 Cubic Yard 2-36”x57” 860 lbs8 Cubic Yard 2-36”x57” 1,020 lbs10 Cubic Yard 2-36”x57” 1,170 lbs

STANDARD CONSTRUCTION True to Gauge, Prime 12 gauge body & floor panels All body panels are fully welded, with fully welded 10 gauge bumpers Lift pockets on 1-4yd are: 10 gauge x 8”H x 24”L. 6-10yd are: 7 gauge x 8”H x 30”L All are fully welded, including leads, gussets, dirt shedders, & fork deflectors at the back 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service One ¾” Dia. threaded drain with plug per container All containers come with pickup points for booming containers on site ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics Steel serial # tag welded on all containers 6” Dia. Polyolefin casters with greaseable roller bearings on 1-3yds (2-Swivel & 2-Rigid) Industrial enamel primer & paint supplied by Sheboygan Paint Co. Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

8yd Front Load 2yd Front Load w/Casters & Optional Lock Bar

FRONT LOAD DIMENSIONS

8

1yd Stackable 1.5yd Stackable

2yd Stackable 3yd Stackable

4yd Stackable 4yd Non‐Stackable

Outside container Width 84” including pockets

Casters add 8¾” to container Height

FRONT LOAD DIMENSIONS

9



10yd Non‐Stackable


FRONT LOADS LOW PROFILE & FLAT TOP

10

LOW PROFILE CONTAINERS FLAT TOP CONTAINERS

Capacity Lids WxL Weight (Approx.)

Capacity Lids WxL Weight (Approx.)

4 Cubic Yard 2-36”x47” 660 lbs 3 Cubic Yard 2-36”x47” 340 lbs 4 Cubic Yard 4-36”x41” 700 lbs 4 Cubic Yard 2-36”x57” 640 lbs

6 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 890 lbs

6 Cubic Yard 2-36”x57” 4-36”x41”

860 lbs

8 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,040 lbs

8 Cubic Yard 54”H

2-36”x57” 4-36”x41”

1,020 lbs

10 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,290 lbs

8 Cubic Yard 72”H

2-36”x57” 4-36”x41”

1, 030 lbs

10 Cubic Yard

2-36”x57” 4-36”x41”

1, 170 lbs

STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge body & floor panels • All body panels are fully welded, with fully welded 10 gauge bumpers • Lift pockets on 1-4yd are: 10 gauge x 8”H x 24”L. 6-10yd are: 7 gauge x 8”H x 30”L.

All are fully welded, including leads, gussets, dirt shedders, and fork deflectors at the back • 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are

less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service

• One ¾” Dia. threaded drain with plug per container • All containers come with pickup points for booming containers on site • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • Steel serial # tag welded on all containers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including:

Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

4yd Front Low Profile 2-Lid w/Lid Stop 4yd Front Load Flat Top 2-Lid

*Flat Top Containers available without Lids

FRONT LOAD LOW PROFILE DIMENSIONS

11

4yd Low Profile 2‐Lid 4yd Low Profile 4‐Lid

6yd Low Profile 8yd Low Profile

10yd Low Profile Outside container Width 84” including pockets

FRONT LOAD FLAT TOP DIMENSIONS

12

3yd Flat Top 4yd Flat Top

6yd Flat Top 8yd 54”H Flat Top Tapered for Stacking

8yd 72”H Flat Top 10yd Flat Top Tapered for Stacking


FRONT LOADS BARN/DOCK

13

Capacity Lids WxL Weight (Approx.) 8 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,020 lbs 10 Cubic Yard Front 2-36”x57” & Back 2-36”x41” 1,170 lbs

STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge body & floor panels • All body panels are fully welded, with fully welded 10 gauge bumpers • Lift pockets are 7 gauge x 8”H x 30”L, that are fully welded, including leads, gussets, dirt shedders, and fork deflectors at the back • 10 Gauge x 2”H x 4”W structural bottom channel runs side to side. Asphalt surfaces are less susceptible to damage & container will not crush in at bottom. Floor is suspended off ground adding years of service • One ¾” Dia. threaded drain with plug per container • All containers come with pickup points for booming containers on site • ½” Dia. Zinc plated steel lid rods with a Nylock nut on one end • Single wall, vacuum formed HDPE plastic lids supplied by Impact Plastics • Steel serial # tag welded on all containers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

8yd Barn/Dock 10yd Barn/Dock Outside container Width 84” including pockets

8yd Front Load Barn 8yd Front Load Barn w/Lid Stop

RESIDENTIAL CARTS & CARRY CANS

14

CAPACITY H x W x L 18 Gallon 13⅜" x 26⅛" x 16" 35 Gallon 38½" x 19" x 22¼" 65 Gallon 42⅛" x 25¼" x 26⅜" 95 Gallon 46¾" x 26⅜" x 33¾"

STANDARD CONSTRUCTION • Water tight lid design eliminates leaking & reduces odor • One-piece attached lid requires no assembly • Multi-system design includes lifter pocket to fit all lifter types • Stronger walls increase cart durability & wind stability, up to 40mph • Dual reinforced wear strip designed to extend the life of carts underside • 10” Rubber wheels on 95 & 65 Gal., and 10” Plastic wheels on 35 Gal. carts for easy

mobility, greater stability, & more durability • Available with Recycle logo or company logo hot stamped on sides

95, 65 & 35 Gallon Carts 18 Gallon Bin


STANDARD CONSTRUCTION • Available with side, front, corner tipper mount,

or with no provision for tipper • Fully gusseted • Industrial enamel primer & paint • Containers are delivered completely

assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

DOCK CARTS

15

Capacity H x W x L 1 Cubic Yard w/Casters 46⅛” x 27½”x 64⅝” 1½ Cubic Yard w/Casters 46⅛” x 38½” x 64⅝” 2 Cubic Yard w/Casters 46⅛” x 49½” x 64⅝”

STANDARD CONSTRUCTION • True to Gauge, Prime 12 gauge Body & Floor panels • 3” Formed channel and wrapped corners • ¼“ Thick bump plates and outriggers • Dump & Push handles • 6” Dia. Polyolefin casters with greaseable roller bearings (2-Rigid & 1-Swivel)

• Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

Front Back

Custom Sizes Available

SELF DUMPING HOPPERS

16

Capacity H x W x L Weight (Approx.)

¼ Cubic Yard 24½“ x 33” x 38½“ 436 lbs ½ Cubic Yard 30” x 41¼” x 48¼” 514 lbs ¾ Cubic Yard 37¾” x 35¼” x 66¼” 592 lbs 1 Cubic Yard 38” x 45¼” x 66¼” 670 lbs 1½ Cubic Yard 38” x 59¼” x 66¼” 750 lbs 2 Cubic Yard 52⅜” x 59¼” x 66¼” 830 lbs 3 Cubic Yard 59½” x 68” x 68¾” 990 lbs 4 Cubic Yard 59½” x 87” x 68¾” 1,100 lbs 5 Cubic Yard 59½” x 102” x 68¾” 1,290 lbs 6 Cubic Yard 69¼” x 102” x 68¾” 1,480 lbs

STANDARD CONSTRUCTION • 10 Gauge construction • Safety chain to tie off on fork mast included on all • Positive locking mechanism • Will not jump off track • 3½”H x 8”W fork pockets • Hoppers ¼ -2yd are stackable • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning

decals, D.O.T. Reflective Tape & any Customer supplied decals OPTIONS INCLUDE:

• Casters – Polyolefin or Steel (2-Rigid & 2-Swivel) • Upgrade to 8 gauge construction • Push Handle • Angle Iron around top edge

Custom Sizes Available

SCRAP BINS & TOTES

17

Capacity H x W x L 2 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 40” 3 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 60” 4 Cubic Yard w/Fork Pockets on Bottom 48” x 48” x 82”

CONSTRUCTION • Endless choices of size & shape, depending on application • Endless variety of construction specs., depending on application • Can be built stackable • Your choice of polyolefin, polyurethane, or steel casters • Industrial enamel primer & paint. • Containers are delivered completely assembled & ready for use. Including:


Stackable Bin with Casters Stackable Bin with Front Door


Stackable Bin

Stackable Bin

Custom Sizes & Styles Available

PARTS INFORMATION

18

SMALL CAN PARTS Caster Pad Single Plastic Lids – See pg. 3,6,7,10 & 11

for Sizes Std. 6” Dia. Polyolefin Caster, Swivel or Rigid

Double Wide Plastic Lids – See pg. 3, 6, 7,10 & 11 for Sizes

6” Dia. Polyolefin Caster, Swivel w/Cam lock

Side Open Plastic Lid - 36”Wx57”L

6” Dia. All Steel Caster or Rubber Wrapped Steel

Double Wall Side Open Lids – 35”Wx56”L & 36”Wx46”L

Lid Rod– ½“ Dia. Zinc plated: Front Load- 75½”L or Rear Load-65”L

Galvanized Steel Lid Steel Sliding Bear Lid

Side Open Hinge Assembly w/Lid Rod Steel Frame w/Plastic Bear “Resistant” Lid Sliding Back Door w/Track Kit- 30”Hx30”W Lid Stop Front Load Manual lock Lid Tab Front Load Autolock- See pg. 32 for Details Rear Load Rack – 4yd, 6yd & 8yd Rear Load Flatbar or Chain Lock Front Load Pocket Assembly Corner Cap Weld & Bolt-on Tow Kit Drain Plug Decal Plate for FL Plastic 22”Hx27”W Small Can Decal Set: 8-DOT Reflective Squares, 1-Large Caution/Warning Decal, 2-Small Caution/Warning Decals

Front Load Plastic Frame Only Front Load Plastic Tub Only

ROLLOFF, RECEIVER & LUGGER PARTS 1⅜” Bullnose 2” x 6” Tube (skid) 20’ Long 1¾” Cable Hook & ¾” Plate Nose Roller w/Axle 4”Dia.x4”W or

4”Dia.x6”W (Front) ⅝” A-frame Hook Plate ½” Nose Roller Support 2½” A-Frame Pin/Bar Bogey Wheel w/Axle 8”Dia.x10”W or

8”Dia. x6”W (Rear) Complete A-frame Std. 62”H or 54”H ½” Bogey Wheel Plate Complete 36” Hook w/Plate 5’x7’ Receiver Diaper Deadlift Skid Nose Custom Vinyl Lettering Deadlift Casting Lugger Pin w/Ear Swing Latch Assembly ½” Lugger Pin Support Plate Ratchet Lugger Ear Sand Pads (set) Large Can Decal Set: 8-DOT Reflective

Squares, 1-Large Caution/Warning Decal, 2-Small Caution/Warning Decals, 2-Ladder Warning Decals, 1-Caution Door Decal, 2-Do not fill above this line Decals,2-Do not Park Decals

Rolloff Hinge 40yd 4/Box, 30yd 3/Box & 20yd down 2/Box 2½“W Flat Door Seal- 20ft. Roll

Replacement Rolloff Door

SQUARE/RECTANGLE ROLLOFFS

19

STANDARD CONSTRUCTION • 3/16” Floor, 20 ft. outside length (Custom lengths available) • 12 Gauge sides, front & door • Top reinforcing 3”x4”x3/16” tubing, 2”x6”x3/16” front uprights, and fully welded top corner gussets • 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center • ¾” Dia. solid tarp rails, with tarp hooks front & rear • ¾” Dia. solid ladders, standard placement is front corner driver side & rear corner passenger side • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate

Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing upright on the hinge side, 2”x3”x3/16” tubing on the latch side, and 2”x3”x3/16” tubing horizontal cross-members (No formed channel) • Doors are on top of floor and come with a door sweep to prevent nails & shingles, ect. from falling out during transport. Guide support latch side of door • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface. 20yd & under: 2 hinges, 30yd: 3 hinges, and 40yd & up: 4 hinges • Door safety chain uses a heavy-duty quick snap with both, Swing Lever or Ratchet latch system. (Safer & more user friendly)

Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift See pg. 21 for Heavy-duty Construction Upgrades & other Options

30yd Square Rolloff, Cable 30yd Square Rolloff w/Decal Plate

ANGLE/TUB ROLLOFFS

20

STANDARD CONSTRUCTION • 3/16” Floor, 20 ft. outside length (Custom lengths available) • 12 Gauge door & front with: 20yd & under: 10 gauge sides, 25yd & up: 7 gauge sides • Tapered construction for easier dumping • Top reinforcing 3”x4”x3/16” tubing, 2”x6”x3/16” front uprights, and fully welded top corner gussets • Choice of ¼” flat or ¾” Dia. ladder rung style tarp rails, with tarp hooks front & rear • ¾” Dia. ladder rung style, standard placement is front corner driver side & rear corner passenger side • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate

Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing upright on the hinge side, 2”x3”x3/16” tubing on the latch side, and 2”x3”x3/16” tubing horizontal cross-members (No formed channel) • Doors are on top of floor and come with a door sweep to prevent nails & shingles, ect. from falling out during transport. Guide support latch side of door • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface. 20yd & under: 2 hinges, 30yd: 3 hinges, and 40yd & up: 4 hinges • Door safety chain uses a heavy-duty quick snap with both, Swing Lever or Ratchet latch

system. (Safer & more user friendly) Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift

See pg. 21 for Heavy-duty Construction Upgrades & other Options

20yd Angle Rolloff, Hook & Cable 40yd Angle Rolloff with Belly Band, Deadlift

ROLLOFF OPTIONS

21

Combination Cable/Hooklift

Combination Deadlift/Hooklift

¼” Floor

12” on Center Floor Channel

22' Long container (Std. Length 20’)

24' Long container (Std. Length 20’)

Upgrade Angle from 10 gauge to 7 gauge Walls

Upgrade Square from 12 gauge to 10 gauge Walls

Upgrade Square from 12 gauge to 7 gauge Walls

Front Ground Rollers

Front Sand Pads

2”x5” Skids with 1”x2” Solid Wear Strips

Lined Skids ¼” x 2”

Inside Wall Gussets

2”x2” Angle on top of Wall

Decal Plates

Gravel Guards (dirt shedders)

Ratchet Door Latch System

Heavy-duty Sealed Door

Heavy-duty Sealed Door w/Fluid Ramp

Barn Style Door/Dump Style Tail Gate

Single-sided Cover with 3 Plastic Lids

Double-sided Cover with 6 Plastic Lids

Removable Steel Cover w/Fork Pockets

Rollover Tarp System

Counter Balanced Cover

Belly Bands on Angle Rolloffs

RECYCLING ROLLOFFS

22

AVAILABLE OPTIONS • Choose a design to meet your requirements • See Angle/Tub or Square/Rectangle Rolloff for container specs. • Choose Single-sided or Double-sided covers • Add interior dividers • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including:


SQUARE RECEIVERS

23

STANDARD CONSTRUCTION • 3/16” Floors, length determined by capacity • 12 Gauge sides, front, door & roof • Tapered construction for easier dumping • 3”x5”x3/16” Structural tubing used for back channel and roof supports • 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center for side & roof stiffeners • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • Drain holes (through floor) under each side channel • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate

Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing uprights & horizontal cross-members (No formed channel) • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface • Guide support latch side of door • Door safety chain uses a heavy-duty quick snap with Ratchet latch system • Sealed Doors & Sealed Charge Opening doors available upon request • Pinning Tunnels & Bars are available upon request

Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift

40yd Square Receiver, Cable 40yd Square Receiver with Optional Charge Door

OCTAGON RECEIVERS

24

STANDARD CONSTRUCTION • 3/16” Floors, length determined by capacity • 8 Gauge sides, front, & roof • 3”x5”x3/16” Structural tubing used for back channel and roof supports • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning

decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 3”H Structural channel 18” on center, with full 3”H structural channel apron • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate

Doors • Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing uprights & horizontal

cross-members (No formed channel) • Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface • Guide support latch side of door • Door safety chain uses a heavy-duty quick snap with Ratchet latch system • Sealed Doors & Sealed Charge Opening doors available upon request • Pinning Tunnels & Bars are available upon request


40yd Octagon Receiver Octagon Receiver w/Belly Bands, Cable & Hook

LUGGERS

25

STANDARD CONSTRUCTION • 3/16” Walls, ¼” Floors & Dump end • Corners wrapped with ¼” thick steel • 4” Channel around perimeter of container • 3” Channel floor stiffeners • 6” Channel at lift pins • ⅜” Lift pin support plates • 3/16” Side bump plates below lift pins • 1½” Dia. drain with plug • Industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

OPTIONS INCLUDE: Dump hooks, Butterfly drain valves, Rear doors, Fully Gusseted floor & Dump Ends, & Covers

Standard Lugger

Low Profile Lugger

High Back Lugger

Sludge Lugger

STORAGE CONTAINERS

26

20ft. Dimensions Outside: 20'Lx9'Hx8'W

Inside: 19'6”Lx7'6”Hx7'6”W

STANDARD CONSTRUCTION • Available in 20ft. or 40ft. lengths • Interior white walls & clean wood floor with tie down hooks • Water tight double locking doors & side fork pockets • Exterior industrial enamel primer & paint • Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals Understructure • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails • Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate


OPTIONS INCLUDE: Side Service Door & Decal Plates

20ft. Container w/Service Door & Decal Plate 20ft. Storage Container


20ft. Storage Container, Hook

20ft. Container w/Rear Dump Door

FLATBEDS & DUMP BODIES

27

AVAILABLE OPTIONS ¼” Diamond Plate 2”x5” Skids with1”x2” Liners 2’ or 3’ Beaver tail 8” Dia.x10”W Rear Rollers Rollers in Beaver Tail Bulkhead: Expanded or Solid Steel Chain Hangers on Bulkhead D-ring Tie Downs Tool Boxes & Power Winch Heavy-duty 2”x6” Outer Rail Tubes

STANDARD CONSTRUCTION • Available in any length, available in 96”W or 102”W • 3/16” Smooth floor • Side pockets with ½”x3” Rub rails on Flatbeds • Industrial enamel primer & paint • Containers are delivered ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

Understructure • 3”H Structural channel 18” on center, with full 2”x3”x3/16” apron on Dump Bodies & 2”x6”x3/16” on Flatbeds • 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails

Hook Styles • Cable-1¾” Cable hook with ¾” thick plate & 4”Dia.x6”W Front Rollers with grease zerks

& ½” thick support • Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates • Deadlift

Dump Truck Body

Flatbed w/3ft. Beaver Tail & Solid Bulkhead

Dump Body, 54” Hook

Flatbed w/Mesh Bulkhead & 54”Hook

SCRAP TRAILERS

28

STANDARD CONSTRUCTION • ¼” Floor with 12” on center floor channel • 7 Gauge walls, front & door • 7 Gauge formed, 2 bend side channel 24” on center • Walls tied into rear bumper • 3”x4”x3/16” door tube • Inside gussets 12”H • 12”H Outside dirt shedders • Ratchet style door closer • Ladders on driver’s side front & rear passenger • Industrial enamel primer & paint • Trailers are delivered ready for use. Including: Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

We have 48ft. trailers available, or you can supply your own.

48ft. Scrap Trailer w/Side Access Doors 48ft. Scrap Trailer w/6ft. Walls


48ft. Scrap Trailer w/5ft. Walls

48ft. Scrap Trailer w/7ft. Walls

AVAILABLE OPTIONS Inside Front Ramp Sidewinder Tarp System Ramp at rear floor to protect tail lights Solid Rear Door or Top half of Door

Expanded Steel Side Access Doors Decal Plates

AUTHORIZED STELLAR DEALER

29

From the first U.S. manufacturer of the Hooklift system, here’s how they set the industry standard:

• The single lift and tilt cylinders are used on all Stellar® Hooklift models ranging from 3,000‐52,000 pound capacities.

• All controls for the Stellar® Hooklift are mounted in the truck cab for operator safety and ease of operation.

• Grease zerks

• New hook design, makes attachment to bodies easier.

• The Stellar® Hooklift rugged rear body tie‐downs insure body stability when in transit and when dumping.

• The Stellar® Hooklift rear hinge pin is made of stainless steel to give extra strength and eliminate corrosion.

• Integrated control valve and hydraulic fluid reservoir with temperature gauge are standard on all Hooklift loaders.

• The Stellar® Hooklift features resettable dump/ tilt tabs.

• Stellar® Hooklift front saddles offer support while in transit and take the weight directly off the hook loading mechanism.

• All electrical wiring protected by heavy conduit.

• Rotary valve locks‐out tilt function while in dump mode to prevent accidental body off loading.

54 different uses of a Stellar® Hooklift:

Vacuum Sewer Cleaner Paint Striper Mobile Office Mosquito Sprayer Body Cone Placement Body Dumpster Transporter Scrap Steel Container Mobile Testing Laboratory Confined Space Access Body Street Flusher Tanker Body Sewer Jetter Concession Stand Water Tanker Body Chipper Body Utility Service Body Weed Sprayer Body Auto/Truck Retrieval Flatbed Water Main Relining Body Stationary Compactor Container

Berming Machine Body Snow Melting Body Pipe Repair Utility Body Asphalt Distributor Tanker Sign/Guardrail Maintenance Field Lube Body Hazmat Body Septic Tank Vacuum Body 6-8 Cu.yd. Side-Load Packer Underground Video Body Dump Body Hydraulic Wrecker Cable Reel Transport Body Emergency Electric Generator Emergency Electric Transformer Hopper Salt Spreader Compost Transport Portable Skating Rink Freezer

Drop Box For Street Sweepers Waste Water Sludge Body Stake Body Rear-loader Packer Concrete/Masonry Repair Catch Basin Cleaner Mobile Concrete Mixer Body Tub Shredder Body Refuse Container Disaster Command Center Flatbed With Aerial Bucket Mechanic’s Field Repair Body Van Body Leaf Vacuum Body Wastewater Skimmings Container Recycle Container Pothole Patcher

TRUCK EQUIPMENT

30

TARPS & TARPING SYSTEMS

TOOL BOXES & FENDERS

TESTIMONIAL

31

Poynette Iron Works is contributing to the efforts of science & experimentation in EXTREME weather conditions in Antarctica! Greetings from Antarctica- “All is well here. The economic slowdown has not affected us. In fact we are busier now because the stimulus money funded some new projects. On 8/31 we loaded two semi trucks with cargo bound for Antarctica. I will be leaving the first week of November this year. The Ice Box Chip Hopper & Container Lids held up great last season. The crew will be arriving in the Divide in a few weeks. Winters in the Divide are windy with temps. dipping to -60ºF.” “We met our goal this season of drilling through the brittle ice zone! The ice in this zone is so brittle, that it has to sit and relax for one year in a basement beneath the building. Before it can be shipped, back to the states, or it will crumble and be useless for science. “

“The Chip Hopper worked great! During 24 hour operation it needed to be dumped every third day, which is what I was shooting for. The equipment operators said

it was easy to handle and worked much better than the system we had last season. This is a quality piece that has been admired by many”

SERIO-US LOCK

32

33

41-930A

Walnut Brown Primer

43-1612C

White

43-2665B

Black

43-31317A Taylor Gray

43-31334A

Battleship Gray

43-31415A

Chrome Silver (Metal Flake)

43-31564 Light Gray

43-31639

Silver Gray (No Metal Flake)

43-31640 Total Gray

43-31891 ADS Grey

43-41172A

Laidlaw Blue

43-41283A Regal Blue

43-41284A

Poynette Blue

43-41355A N.S. Blue

43-41428B Allied Blue

43-41478

Purple

43-41484

Chicago Light Blue

43-41493

West Central Blue

43-41571

PMS#281 Blue

43-41603 Blue “C”

43-4899C Mack Blue

43-51299C WM Green

43-51300C

Veolia Green

43-51367A ARC Green

43-51370B

Valley Green

43-51628

John Deer Green

43-51726

Atomic Green

43-61773A Allis Orange

43-61849A

Advanced Yellow (Dark)

43-61858A

Service Master Yellow

43-62013A Van Yellow

43-62018A

Kubota Orange

43-62181

Container Orange

43-62245

Omaha Orange

43-62297

Orange Yellow

34

43‐7784

Bengal Tan

43‐81171C Burgundy

43‐81303C

Red

43‐81474A

Shoreline Red

43‐81524A Chilled Wine

43‐81549

Machinery Red

43‐81556 Bright red

43‐9331C Walnut

43‐9652A Van Brown

43‐9670

Ace Brown

35

POYNETTE IRON WORKS, INC. STEEL CONTAINERS LIMITED WARRANTY

POYNETTE IRON WORKS, INC. warrants only products of it’s manufacture against operational failure caused by defective material or workmanship, WHICH OCCURS DURING NORMAL USE FOR A PERIOD OF TWELVE (12) MONTHS FROM DATE OF SHIPMENT FROM OUR FACTORY. POYNETTE IRON WORKS, INC. will replace all parts of our manufacture free of charge that our inspection at our factory shows to us to be defective in accordance with the above paragraph. WRITTEN PERMISSION MUST BE OBTAINED FROM AUTHORIZED POYNETTE PERSONNEL FOR ANY REPAIRS PERFORMED OTHER THAN IN OUR FACTORY. All claims for reimbursement must be filed with proper documentation no later than forty-five (45) days after occurrence to be allowed. All products purchased by POYNETTE IRON WORKS, INC. from an outside vendor shall be covered by the warranty of that respective vendor only. POYNETTE IRON WORKS, INC. does not participate in or obligate itself to any such warranty. NO FREIGHT, TRAVEL COST, MEALS, OR LODGING SHALL BE COVERED BY THIS WARRANTY. All labor costs allowed shall be in accordance with POYNETTE IRON WORKS, INC. established rate. In case of alleged defect, product shall be returned to POYNETTE IRON WORKS, INC. with transportation charges prepaid. POYNETTE IRON WORKS, INC. makes no warranty on any of it’s equipment used in any way except as it was designed, intended, and sold to perform. This limited warranty is expressly in lieu of all other warranties, expressed or implied and of all other obligations or liabilities on the part of POYNETTE IRON WORKS, INC. and it neither assures nor authorizes any other person to assure for it any other liability. POYNETTE IRON WORKS, INC. does not assume any liability for loss of products, time, or any other consequential damages. All claims shall be processed through your POYNETTE IRON WORKS, INC. authorized dealer.

36

POYNETTE IRON WORKS, INC. COMMERCIAL PLASTIC INJECTION MOLDED CONTAINERS

LIMITED WARRANTY

POYNETTE IRON WORKS, INC. warrants only products of it’s manufacture against operational failure caused by defective material or workmanship, WHICH OCCURS DURING NORMAL USE FOR A PERIOD OF TEN (10) YEARS FROM DATE OF SHIPMENT FROM OUR FACTORY. POYNETTE IRON WORKS, INC. will replace all parts of our manufacture free of charge that our inspection at our factory shows to us to be defective in accordance with the above paragraph. WRITTEN PERMISSION MUST BE OBTAINED FROM AUTHORIZED POYNETTE PERSONNEL FOR ANY REPAIRS PERFORMED OTHER THAN IN OUR FACTORY. All claims for reimbursement must be filed with proper documentation no later than forty-five (45) days after occurrence to be allowed. All products purchased by POYNETTE IRON WORKS, INC. from an outside vendor shall be covered by the warranty of that respective vendor only. POYNETTE IRON WORKS, INC. does not participate in or obligate itself to any such warranty. NO FREIGHT, TRAVEL COST, MEALS, OR LODGING SHALL BE COVERED BY THIS WARRANTY. All labor costs allowed shall be in accordance with POYNETTE IRON WORKS, INC. established rate. In case of alleged defect, product shall be returned to POYNETTE IRON WORKS, INC. with transportation charges prepaid. POYNETTE IRON WORKS, INC. makes no warranty on any of it’s equipment used in any way except as it was designed, intended, and sold to perform. CAUTION – Plastic injection molded containers are not designed or expected to withstand applications where hot materials placed in or near the container may cause combustion of said container. This limited warranty is expressly in lieu of all other warranties, expressed or implied and of all other obligations or liabilities on the part of POYNETTE IRON WORKS, INC. and it neither assures nor authorizes any other person to assure for it any other liability. POYNETTE IRON WORKS, INC. does not assume any liability for loss of products, time, or any other consequential damages.

ABOUT US - Poynette Ironworks Inc. - Home€¦ · ABOUT US 94,000 sq.ft. of manufacturing space on...

Documents

Transcript of ABOUT US - Poynette Ironworks Inc. - Home€¦ · ABOUT US 94,000 sq.ft. of manufacturing space on...