Post on 06-Apr-2018
8/3/2019 797506.G0
1/2
Fire and intruder alarm panel 2001
Combined fire and intruder alarm detection in a single system
Clear, unequivocal LED indicators
Two detector zones with a total of 60 detectors
One tamper/hold-up alarm zone
Arming at the panel or by remote control
One control input for alarm acknowledgement or arming
Connection of external signalling devices possible
Variable alarm/delay time
Simple installation and operation
Service and maintenance functions can be called up
One-man revision
Ergonomic, attractive stylingcompact dimensions
The affordable small panel for
combined fire and intruder detection
Low-cost high security at last a
small panel that convincingly combi-
nes fire and intruder detection: the fire
and intruder alarm panel 2001. Its
optimal price/performance ratio
makes it an attractive option forprivate homes and small businesses.
The first two detector zones can be
used for either fire or intruder detec-
tion. This provides the versatility
that allows the panel to be used for
fire or intruder detection or a combi-
nation of the two.
A professional security system for smaller buildings
The panel 2001 enables operators/ owners of smaller buildings to install a
professional security system at an affordable cost. It can be used to secu-
re large apartments, single or multiple family housing, warehouses or work-
places, or as a monitoring panel for so-called dead areas. As with all
ESSER alarm systems, the panel 2001 is characterised by its high level of
false-alarm immunity.
Combined operation
The alarm panel can be used as a fire alarm panel or an intruder alarm
panel or a combination of both. Operation is simplicity itself. Depending on
how they are armed, the detectors generate internal or external alarm
signals when activated. External alarm devices or indoor indicators and
signalling devices can be connected for this purpose. If desired, an alarm
delay of between 0 and 60 seconds can be programmed.
8/3/2019 797506.G0
2/2
PartNo.797506.G
010/2006Technicalinformationissubjecttochangewithoutnotice!
Dieselstrae 2, D-41469 Neuss Telefon: +49 (0) 21 37 / 17-0 Internet: E-mail:Te lefax: +49 (0) 21 37 / 17-286 www.esser-systems.de info@esser-systems.de
Novar GmbH a Honeywell Company
Fernkorngasse 10, A-1100 Wien Telefon: +43 (0)1 / 6 00 60 30 Internet: E-mail:Telefax: +43 (0)1 / 6 00 60 30-900 www.novar.at austria@novar.com
Novar Austria GmbH
Technical data:
Mains voltage: 230 V AC
Mains frequency: 50 Hz up to 60 Hz
Rated voltage: 12 V DC
Quiescent current: approx. 40 mA
Voltage for external users: 12 V DC / max. 350 mA
Permissible battery capacity: 12 V/2 Ah
Housing dimensions (W x H x D): 270 mm x 221 mm x 71 mm
Class of protection: class 3k5 according IEC 721-3-3: 1994
Protection class: IP 40
Housing: ABS
Colour: white, with blue front panel
Operating temperature range 0 C to +50 C
Operations: Buzzer off, delete, arm, disarm, walk test function
Input: 2 switched differential detector zones that can be optionally programmedfor fire or intruder detection
1 differential detector zone for recognition of tampering, hold-up or technical alarms.
The housing contact can be looped into this detector zone via jumpers.
1 control input for remote-controlled operation of the panel. Arming/disarming can be effected
by means of pulse or continuous contact or by remote acknowledgement of an alarm signal.
Output: 4 open collector transistor outputs; total current 500 mA
relay 1 with a contact rating of 30 V/1 A
relay 2 with a contact rating of 30 V/2 A
Order information Part No.
Fire and intruder alarm panel 2001 382001PIR motion detector 166010, 033360
Glass-break detector 032272.16
Magnetic contact 030001.16
Key switch SS90 154428
Half cylinder 218781
Detector base 781590
Optical fire detector 761362
Temperature fire detector 761262
Manual call point 804970For further order data please refer to our "Fire Alarm Technology" product line catalogue.
The range of accessories for the fire and intruder alarm panel 2001