Post on 24-Mar-2016
description
Applications
- Round and non-round containers
- Rigid or fragile container designs
- Foil and plastic materials
- Composite, metal, glass and blow-molded containers
- 2” - 6 1/2” diameter containers
- 2” - 12” height containers
DEL Packaging, Ltd
Membrane Heat Sealer | Model: MHS-120
Membrane Heat Sealer - 120
This machine is designed to apply foil or plastic membranes to composite/plastic canisters, tubs and containers. Containers are timed into captivator-blocks by mean of a timing-screw. The blocks and screw index the containers to a sealing station where the container is grasped and supported by a heavy duty clampingmechanism. A rotary die-cutter completely cuts the membrane patch from the web and the patch is transfered independentlyby a vacuum transfer system and attached to the conduction sealing heads by vacuum. This method of cutting and transfering the membrane patch ensures a very accurate membrane placement and reduces �lm waste to an absolute minimum. Heavy-duty air cylinders apply the pressure necessary for a hermetic seal.
PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders
Speci�cations- Up to 120 containers per minute
- Dual-timing screw in-feed
- Vacuum-�lm waste removal system
- Stainless steel (non-wash down) construction
- Mechanical container diameter adjustment
- Ethernet and communications modules
- Vacuum-�lm transfer technology
- Variable speed capability without a�ecting heat-seal
- Servo-controlled rotary-die and vacuum transfer system for membrane
- 460 Volt / 60 Hertz / 3 Phase NEMA 12 DC Electrical
Available Options
- Wash-down design
- Soft-reject (�lm-splice and o�set-seal detection)
- Leak detection (Gross to Micro Leaks)
- Modi�ed atmosphere packaging (nitrogen gassing)
- Laser-print capabilities for seal-head indenti�cation
- All domestic and international voltages to meet UL and CE requirements)SEALER HEADS
SAFETY TUNNELS
INDEXING CONVEYORFLOW
PRODUCT
OFFSET DRIVE CONVEYOR
MAIN OIP PANEL
3'
7'-4"
CRADLE BLOCK ASSY
HEIGHT ADJUSTMENT HANDLE
TIMING SCREW
SHUTTLE PLATE
CONTAINER CLAMP
2'
6"x7' TABLETOPINFEED CONVEYOR 6"x12' TABLETOP INDEXING CONVEYOR
AIR DROP:10 CFM @ 80 PSI
ELECTRICAL DROP460VAC,3PH,60HZ, (AMPERAGE PENDING)
LOW VOLTAGE PANEL
HIGH VOLTAGE PANEL
AIR DROP:16 CFM @ 40 PSI
19'
8'-4" 4'-8 38 "
1'-11 38 "
4'-6 12 "
1'-10 12 "
4'-8 14 "
FILM FEEDER
FILM PATH
VACUUM FILM REMOVAL
DIE CUTTERFLOW
PRODUCT
REMOTE OPERATOR PANEL
Experience the DEL Di�erence
Contact DEL Packaging, Ltd
18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | sales@delpackaging.com Membrane Heat Sealer | MHS-120