Applications

- Round and non-round containers

- Rigid or fragile container designs

- Foil and plastic materials

- Composite, metal, glass and blow-molded containers

- 2” - 6 1/2” diameter containers

- 2” - 12” height containers

DEL Packaging, Ltd

Membrane Heat Sealer | Model: MHS-120

Membrane Heat Sealer - 120

This machine is designed to apply foil or plastic membranes to composite/plastic canisters, tubs and containers. Containers are timed into captivator-blocks by mean of a timing-screw. The blocks and screw index the containers to a sealing station where the container is grasped and supported by a heavy duty clampingmechanism. A rotary die-cutter completely cuts the membrane patch from the web and the patch is transfered independentlyby a vacuum transfer system and attached to the conduction sealing heads by vacuum. This method of cutting and transfering the membrane patch ensures a very accurate membrane placement and reduces �lm waste to an absolute minimum. Heavy-duty air cylinders apply the pressure necessary for a hermetic seal.

PProduct names, logos, brands and other trademarks featuredare the property of their respective trademark holders

Speci�cations- Up to 120 containers per minute

- Dual-timing screw in-feed

- Vacuum-�lm waste removal system

- Stainless steel (non-wash down) construction

- Mechanical container diameter adjustment

- Ethernet and communications modules

- Vacuum-�lm transfer technology

- Variable speed capability without a�ecting heat-seal

- Servo-controlled rotary-die and vacuum transfer system for membrane

- 460 Volt / 60 Hertz / 3 Phase NEMA 12 DC Electrical

Available Options

- Wash-down design

- Soft-reject (�lm-splice and o�set-seal detection)

- Leak detection (Gross to Micro Leaks)

- Modi�ed atmosphere packaging (nitrogen gassing)

- Laser-print capabilities for seal-head indenti�cation

- All domestic and international voltages to meet UL and CE requirements)SEALER HEADS

SAFETY TUNNELS

INDEXING CONVEYORFLOW

PRODUCT

OFFSET DRIVE CONVEYOR

MAIN OIP PANEL

3'

7'-4"

CRADLE BLOCK ASSY

HEIGHT ADJUSTMENT HANDLE

TIMING SCREW

SHUTTLE PLATE

CONTAINER CLAMP

2'

6"x7' TABLETOPINFEED CONVEYOR 6"x12' TABLETOP INDEXING CONVEYOR

AIR DROP:10 CFM @ 80 PSI

ELECTRICAL DROP460VAC,3PH,60HZ, (AMPERAGE PENDING)

LOW VOLTAGE PANEL

HIGH VOLTAGE PANEL

AIR DROP:16 CFM @ 40 PSI

19'

8'-4" 4'-8 38 "

1'-11 38 "

4'-6 12 "

1'-10 12 "

4'-8 14 "

FILM FEEDER

FILM PATH

VACUUM FILM REMOVAL

DIE CUTTERFLOW

PRODUCT

REMOTE OPERATOR PANEL

Experience the DEL Di�erence

Contact DEL Packaging, Ltd

18113 Telge Road | Cypress, TX 77429Phone: 281.653.0099 | Fax: 281.653.0082http://www.delpackaging.com | sales@delpackaging.com Membrane Heat Sealer | MHS-120