Post on 29-Dec-2015
1
SFP Checker Operational Instructions
Version:3.20110427
2
SFP Checker interface indication
Selection # 1
Selection # 2
Display # 2
Display # 4
Display # 5
Display # 6
Function Key # 7
Function Key # 8
Function Key # 11
Function Key # 9
Function Key # 10
3
1. ComPort: Connect your Computer USB port to the SFP CHECKER . To Select
Selection #1 ComPortSelection #1 ComPort and to click the Function Key #7Function Key #7 OpenComOpenCom. .
2. CMU Rate Control: To Select the Selection #2Selection #2 of Error Rate & Pattern.
3. Error Rate data: It can be read Error RateError Rate data through different datarate in Display #3Display #3. The TimerTimer will be there a few adjustment according to datara
te selected.
SFP Checker operational instructions:
4
4. SFP module part no. data:
Press Function Key #8 SCAN IDSCAN ID can retrieve SFP module’s data, Vendor Name, Part Number, Serial Number and Wavelength. Press Function Key #9 StartStart also could get the all module’s data.
5. Optical Power Meter: Display #5
When in process the BERT, plug the fiber cable in Power Meter
Module Port # 4 then get the output power of Port #1.
6. Wavelength:
The Wavelength shown on Display #6.
SFP Checker operational instructions:
5
YouTube
http://www.youtube.com/watch?v=tVr530VA764