Post on 05-Jan-2016
1
Safety Rules & Regulations (Part B)
Introduction to Technology
2
• 21. Do not touch others with any tools, especially if they are sharp, pointed or hot.
3
• 22. Be cautious of safety work zones. Do not go in them unless you are using the equipment or tools
4
• 23. Do not operate tools or machinery unless you know how to properly use it.
5
• 24. Use the tool for what it was designed to do.
6
• 25. Dispose of flammable material in the appropriate container to prevent spontaneous combustion.
7
• 26. Do not eat or drink in the lab to prevent spills from damaging tools and equipment.
8
• 27. Do not eat or drink in the lab to prevent spills, which can cause electrocution from electrical tools and equipment.
9
• 28. Do not eat or drink in the lab to prevent chemicals accidentally coming into contact with food or drink and subsequently becoming ingested.
10
• 29. Do not stand in areas that are wet when working with electrical tools and equipment, which can result in electrocution.
11
• 30. Leather shoes, long sleeves and long pants should be worn to prevent splatters and spills on the skin.
12
• 31. Know where the eyewash station is and how to use it.
13
• 32. Flush eyes for at least 15 minutes and seek medical attention as soon as possible.
14
• 33. Use leather gloves when handling lumber. This prevents splinters from sticking into your hands and fingers.
15
• 34. Do not use gloves when cutting anything because your fingers could be pulled into the cutting blade.
16
• 35. Report any accidents regardless of how small it is to the instructor.
17
• 36. Do not spray or splatter another person with chemicals.
18
• 37. Think before you act. Carelessness and complacency is the number one reason for death or injury in any work environment.
19
• 38. Do not operate any machinery or equipment when you are tired as you may become injured.
20
• 39. Do not distract any one operating equipment or machinery.
21
• 40. While operating machinery, give your work your complete attention. Do not become distracted.
22
The End!