1 Safety Rules & Regulations (Part B) Introduction to Technology.

22
1 Safety Rules & Regulations (Part B) Introduction to Technology

Transcript of 1 Safety Rules & Regulations (Part B) Introduction to Technology.

Page 1: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

1

Safety Rules & Regulations (Part B)

Introduction to Technology

Page 2: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

2

• 21. Do not touch others with any tools, especially if they are sharp, pointed or hot.

Page 3: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

3

• 22. Be cautious of safety work zones. Do not go in them unless you are using the equipment or tools

Page 4: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

4

• 23. Do not operate tools or machinery unless you know how to properly use it.

Page 5: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

5

• 24. Use the tool for what it was designed to do.

Page 6: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

6

• 25. Dispose of flammable material in the appropriate container to prevent spontaneous combustion.

Page 7: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

7

• 26. Do not eat or drink in the lab to prevent spills from damaging tools and equipment.

Page 8: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

8

• 27. Do not eat or drink in the lab to prevent spills, which can cause electrocution from electrical tools and equipment.

Page 9: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

9

• 28. Do not eat or drink in the lab to prevent chemicals accidentally coming into contact with food or drink and subsequently becoming ingested.

Page 10: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

10

• 29. Do not stand in areas that are wet when working with electrical tools and equipment, which can result in electrocution.

Page 11: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

11

• 30. Leather shoes, long sleeves and long pants should be worn to prevent splatters and spills on the skin.

Page 12: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

12

• 31. Know where the eyewash station is and how to use it.

Page 13: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

13

• 32. Flush eyes for at least 15 minutes and seek medical attention as soon as possible.

Page 14: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

14

• 33. Use leather gloves when handling lumber. This prevents splinters from sticking into your hands and fingers.

Page 15: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

15

• 34. Do not use gloves when cutting anything because your fingers could be pulled into the cutting blade.

Page 16: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

16

• 35. Report any accidents regardless of how small it is to the instructor.

Page 17: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

17

• 36. Do not spray or splatter another person with chemicals.

Page 18: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

18

• 37. Think before you act. Carelessness and complacency is the number one reason for death or injury in any work environment.

Page 19: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

19

• 38. Do not operate any machinery or equipment when you are tired as you may become injured.

Page 20: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

20

• 39. Do not distract any one operating equipment or machinery.

Page 21: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

21

• 40. While operating machinery, give your work your complete attention. Do not become distracted.

Page 22: 1 Safety Rules & Regulations (Part B) Introduction to Technology.

22

The End!