Post on 03-May-2018
: CNC Turning Centers : Refer Machining & Turning Centre Details
: 06 Nos. : Vertical Machining Center
: Refer Machining & Turning Centre Details : 01 Nos.
: Capstan & Centre Lathe Machines : Dia 200 mm X Length 400 mm
: 03 Nos.
: Lapping Machines : 300 mm & 600 mm Plates
: 02 Nos.
: Honing Machines : From 5 mm To 25 mm
: 02 Nos.
Notes
: Band Saw Machines : 02 Nos.
: Ultrasonic Cleaning Machines : 02 Nos.
: Vibrator Deburring Machine : 02 Nos.
: Arbor Press/Hand Press : 04 Nos.
: Drill Point Grinder : 01 Nos.
: Portable Bench Grinder/Polishing Machines : 04 Nos.
: Diesel Generating Sets : 02 Nos.
: Milling & Drilling Machines
: 05 Nos. : Roll Marking Machine/Automatic Numerator
: 02 Nos. : Electronic Weighing/Counting Scales
: 05 Nos. : Air Compressors
: 04 Nos. : Molding Press (Rubber Compounds)
: 01 No. : Molding Machines (ThermoplasticCompounds)
: 01 Nos.
Notes
Through Hardening Induction Hardening Case Hardening Hardening & Tempering Solution Annealing Salt Bath Annealing
Sand Blasting Shot Blasting Pickling Electropolishing Nickel Plating Zinc Plating Chrome Plating Hard Chrome Plating Silver Plating Gold Plating Cadmium Plating Anodizing Hard Anodizing Phosphating Buffing
Ferrous Materials Non Ferrous Materials
Ferrous Materials Non Ferrous Materials
Notes
Stainless Steel Welding Welding Brazing Engraving Laser Marking Internal Grinding Cylindrical Grinding Surface Grinding Centreless Grinding Tool Grinding Broaching Thread Rolling Thread Cutting
Polychloroprene (Neoprene) Silicone (Silicon) Fluoroelastomer (Viton) NBR nitrile rubber SBR styrene butadiene diene rubber EPDM ethylene-propylene terpolymer rubber
PBT polybutylene terephthalate POM polyacetal PP polypropylene PPS polyphenylene sulfide PTFE polytetrafluoroethylene PVC polyvinyl chloride PA polyamide PC polycarbonate LDPE low-density polyethylene HDPE high-density polyethylene
Notes