With the power of machines€¦ · • DOOSAN PUMA 2600 LB Chuck capacity 305 mm Number of stations...

8
www.hamptons.hu With the power of machines

Transcript of With the power of machines€¦ · • DOOSAN PUMA 2600 LB Chuck capacity 305 mm Number of stations...

  • www.hamptons.hu

    With the power of machines

  • About us

    Hamptons is based in budapest, Hungary producing high precision metal components using CNC machines.

    We specialise in the production of components for hydraulic assemblies, pump shafts and several other products used in the energy industry.these components require high tolerances. We have a wide range of measuring instruments including 3D coordinate measuring devices. We can work with all kind of materials including steel, alumini um, copper, stainless steel and various alloys.

    We have obtained ISO 9001:2008, EN ISO 14001:2004 and ISO OHSAS 18001:2007 quality certificates and our quality control is in accordance with those.

    our mission statementQuality and delivery above all. We believe that con-tinuous investments into both human and physical capital are the essence of further development.

    As for human capital, these investments are aimed not only at increasing technical skills and capabilities, but also at commitments and sense of responsibility.

    We are helped in our efforts by a clear vision of the company’s future.

  • our produCts

    Hydraulics

    Hydraulics

    Other Parts

    Pump Parts

    Adapters

    Other Parts

    Pump Parts

    Other Parts

    2

    Hydraulics

    Adapters

  • CNC LAtHEs• MORISEIKISL204(3-Axis CNC) Chuck capacity 250 mm Number of stations in turret 12 Max. turning diameter 330 mm Max. turning length 500 mm Control system Fanuc Spindle speed 45-4500 rpm Main drive power 11 kW

    • GILDEMEISTERCTX310eco(3-Axis CNC) Chuck capacity 210 mm Number of stations in turret 12 Max. turning diameter 260 mm Max. turning length 330 mm Control system Siemens 810D Main drive power 16,5 kW

    • TAIWANTAKISAWAEX110 (2 pcs) Chuck capacity 250 mm Number of stations in turret 10 Max. turning diameter 400 mm Max. turning length 710 mm Control system Fanuc Spindle speed 30-3500 rpm Main motor power 18,5 kW

    • TAIWANTAKISAWANEX110(2 pcs) Chuck capacity 250 mm Number of stations in turret 10 Max. turning diameter 400 mm Max. turning length 657 mm Control system Fanuc Main motor power 15 kW

    • DOOSANPUMA2600LB Chuck capacity 305 mm Number of stations in turret 12 Max. turning diameter 480 mm Max. turning length 1245 mm Control system Fanuc Main motor power 18,5 kW

    • DAEWOOPUMA12L Chuck capacity 300 mm Number of stations in turret 10 Max. turning diameter 480 mm Max. turning length 1020 mm Control system Fanuc Main drive power 22 kW

    •NAKAMURATOMESUPERTURN5 Chuck capacity 400 mm Number of stations in turret 10 Max. turning diameter 465 mm Max. turning length 550 mm Control system Fanuc Main drive power 22 kW

    • DOOTURNS280 Chuck capacity 300 mm Number of stations in turret 8 Max. turning diameter 280 mm Max. turning length 330 mm Control system Fanuc Spindle speed 45-4500 rpm Main drive power 14 kW

    •HARDINGE Chuck capacity 160 mm Number of stations in turret 10 Max. turning diameter 231 mm Max. turning length 346 mm Rapid traverse rate in X direction 12 m/min In Z direction 16 m/min Control system Fanuc Spindle speed 50-5000 rpm Main motor power 7,5 kW

    Y-AXISCNCTURNINGCENTER• HAASST-30Y Chuck Size 254 mm Max. turning diameter 457 mm Max. turning length 584 mm X-movement 318 mm Y-movement ±50.8 mm Z-movement 584mm Control system Haas Spindle Speed 3400 rpm Spindle Power 22.4 kW

    MANUALLATHE• C10MS Chuck capacity 300-800 mm Max. turning diameter 800 mm Max. turning length 2500 mm Main drive power 5,5 kW

    GRINDINGMACHINE• SHU322.21 Max. grinding diameter 250 mm Max. grinding length 1000 mm Control system Fanuc

    CNCVERTICALMACHININGCENtErs• HAASVF22BHE(4-Axis) Table area 914 x 356 mm X-movement 762 mm Y-movement 406 mm Z-movement 508 mm Max. weight of workpiece 1361 kg Spindle Speed 0-7500 rpm Number of Tools 20 Spindle Power 15 kW

    • HAASUMC750 (5-Axis) spindle Speed 8100 rpm Drive System Inline Direct-Drive Max Torque 90 ft-lb @ 2000 rpm122 Nm @ 2 000 rpm Max Rating 30 hp 22.4 kW

    tool Changer Capacity 40 Tool Type/Tape: BT 40

    travels X-movemen 762 mm Y-movement 508 mm Z-movement 508 mm B-movement +110°, -35° C-movement 360°

    trunnion Table Size 24.8″x19.7″, 630×500 mm Capacity 660 lb 300 kg

    •AKIRASEIKIV5(4-Axis) Table area 1450 x 480 mm X-Traverse ‘X’ 1300 mm Y-Traverse ‘Y’ 535 mm Quill traverse ‘Z’ 560 mm Control system Fanuc Spindle speed 50-6000 rpm Tool carousel capacity 24 tools Spindle power 19 kW

    MILLINGMACHINES• FEELERQM22T (3+1-Axis) Table area 650 x 420 mm X-movement 560 mm Y-movement 420 mm Z-movement 450 mm Spindle Speed 50-12 000 rpm Number of Tools 20 Spindle Power 15 kW •FEELERQM22APC (3-Axis, automatic pallet change) Table area 651 x 420 mm X-movement 560 mm Y-movement 420 mm Z-movement 450 mm Spindle Speed 50-12 000 rpm Number of Tools 20 Spindle Power 15 kW Pallet change time 5 sec

    MANUALMILLINGMACHINES•TOSFNK25 (vertical spindle) Chuck capacity 200 mm Max. turning diameter 400 mm Max. turning length 400 mm Table area 1250 x 290 mm

    FULLY-AUTOBANDSAW•WAYTRAINLX-330NC(2 pcs.) Capacity 330 mm

    • KNUTHABS280BAUT Capacity 280 mm

    LISTOFMACHINES

  • NEWMACHINEPURCHASE!

    As a part of our continuous development, we purchased anewHigh-PerformanceCNCTURNINGCENTER.

    DOOSANPUMA2600LB CNC TURNING CENTER

    4

    SPECIFICATIONS:

    Chuckcapacity: 305 mmNumberofstationsinturret: 12Max.turningdiameter: 480 mmMax.turninglength: 1245 mmControlsystem: FanucMainmotorpower: 18,5 kW

  • MACHININGDIMENSIONS

    CNC LATHES

    CNC VERTICALMACHINING CENTERSCNC VERTICAL MACHINING CENTER

    Y-AxIS CNC TuRNING CENTER

    CNC LATHES

    MaterialGroups Machiningdiameter Machininglength

    1.1 Carbon steel 1.2 1.3 1.4 1.5 Alloy steel 1.6 1.7 1.8 2.1 10 - 350 mm - 550 mm stainless steel 2.2 2.3 6.1Cooper, 6.2brass & bronze 6.3 6.4 7.1Aluminium 7.2Magnesium 7.3 7.4

  • QUALITYCONTROL

    6

    the quality of our products is ensured by strict quality control using advanced measuring methods by experienced specialists.

    We can measure up to 0,001 mm accuracy.

    We have obtainedISO9001:2008,EN ISO 14001:2004 and ISOOHSAS 18001:2007 quality cer- tificates and conduct our business accordingly. Each of our products is measured by our professionals individually.

    CNC coordinate measuring device

    REFERENCES

    KSBAG.– GERMANY•TENTECPARTOFTHEATLASCOPCOGROUP–ENGlAND•VINSTALLATION–ENGlAND ALBANYPUMPS-ENGlAND•ATEKNIK–SWEDEN•CERN–SWITZERlAND

  • HAMPTONSKFT.Hungary, 1211 Budapest, Farönk u. 1.,Tel.: + 36 1 425 5018, +36 1 425 5019Mobile: +36 70 425 42 83, E-mail: [email protected] www.hamptons.hu


149,- 499,- 299,- 129,-€¦ · -1from 500 - 2000 min • 230V / 50Hz • 750 W • max. turning diameter Ø350 mm • spindle bore Ø10 mm • distance between centers 1000 mm •

149,- 499,- 299,- 129,-€¦ · -1from 500 - 2000 min • 230V / 50Hz • 750 W • max. turning diameter Ø350 mm • spindle bore Ø10 mm • distance between centers 1000 mm •

7.63C 9€¦ · Inner tyres turning radius mm 2.703 External tyres turning radius mm 4.756 External bucket turning radius* mm 6.050 * Bucket on traveling condition HYDRAULIC SYSTEM

7.63C 9€¦ · Inner tyres turning radius mm 2.703 External tyres turning radius mm 4.756 External bucket turning radius* mm 6.050 * Bucket on traveling condition HYDRAULIC SYSTEM

Gas Springs - Industriestoßdämpfer, Schwerlastdämpfer ...€¦ · 196 WM-G Mounting G0 Mounting K0 mm mm N min. N max. N max. mm mm mm mm mm mm mm mm mm mm mm mm WM-G-19-50 19

Gas Springs - Industriestoßdämpfer, Schwerlastdämpfer ...€¦ · 196 WM-G Mounting G0 Mounting K0 mm mm N min. N max. N max. mm mm mm mm mm mm mm mm mm mm mm mm WM-G-19-50 19

Machining Centres - Sea-NC Engineering LtdFanuc 18T Control Max turning dia 300mm Max turning length 460mm End Cap 51mm bore Max turning dia 225mm Max turning length 320mm End Cap

Machining Centres - Sea-NC Engineering LtdFanuc 18T Control Max turning dia 300mm Max turning length 460mm End Cap 51mm bore Max turning dia 225mm Max turning length 320mm End Cap

Professional PLUS 2 · Altez a max 2000 mm Peso max 40 kg Larghez a max 950 mm Altez a max 2300 mm Peso max 60 kg Larghez a max 1100 mm Altez a max 2400 m Peso max 0 kg Installation

Professional PLUS 2 · Altez a max 2000 mm Peso max 40 kg Larghez a max 950 mm Altez a max 2300 mm Peso max 60 kg Larghez a max 1100 mm Altez a max 2400 m Peso max 0 kg Installation

fiche 008.001.002.001 - Penthouse - Blue Rabbit...4 Penthouse 008.001.002.001 min 68 mm max 90 mm min 68 mm max 90 mm 5x A 270 cm min 68 mm max 90 mm min 68 mm max 90 mm 4x B 192 cm

fiche 008.001.002.001 - Penthouse - Blue Rabbit...4 Penthouse 008.001.002.001 min 68 mm max 90 mm min 68 mm max 90 mm 5x A 270 cm min 68 mm max 90 mm min 68 mm max 90 mm 4x B 192 cm

The right tool for everyone! · Max. drilling diameter in concrete 14 mm 14 mm 14 mm Max. drilling diameter in steel 12 mm 12 mm 12 mm Max. drilling diameter in wood 30 mm 30 mm 30

The right tool for everyone! · Max. drilling diameter in concrete 14 mm 14 mm 14 mm Max. drilling diameter in steel 12 mm 12 mm 12 mm Max. drilling diameter in wood 30 mm 30 mm 30

SIA METĀROmetaro.lv/pdf/GTW-SWE-2-presentation.pdf · METALWORKS Turning: CNC lathe + C-axis milling (max ∅650 mm, L = 4000 mm) Conventional lathe (max ∅1000 mm, L = 5000 mm)

SIA METĀROmetaro.lv/pdf/GTW-SWE-2-presentation.pdf · METALWORKS Turning: CNC lathe + C-axis milling (max ∅650 mm, L = 4000 mm) Conventional lathe (max ∅1000 mm, L = 5000 mm)

GrainSizeEffectontheMechanicalBehaviorofCohesionless ...downloads.hindawi.com/journals/ace/2018/4608930.pdf · d max = 40 mm d max = 20 mm d max = 10 mm d max m m=5 (a) d max = 40

GrainSizeEffectontheMechanicalBehaviorofCohesionless ...downloads.hindawi.com/journals/ace/2018/4608930.pdf · d max = 40 mm d max = 20 mm d max = 10 mm d max m m=5 (a) d max = 40

PUMA VTS seriesPUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214 Applied with Box Guideway

PUMA VTS seriesPUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214 Applied with Box Guideway

CompactFloor DIRECT 1...EPS DEO 200 kPa 20 mm | max. 1 layer 20 mm | max. 1 layer XPS DEO 300 kPa 30 mm | max. 1 layer 30 mm | max. 1 layer – – XPS DEO 500 kPa 60 mm | max. 1 layer

CompactFloor DIRECT 1...EPS DEO 200 kPa 20 mm | max. 1 layer 20 mm | max. 1 layer XPS DEO 300 kPa 30 mm | max. 1 layer 30 mm | max. 1 layer – – XPS DEO 500 kPa 60 mm | max. 1 layer

HIGH-PRECISION METALWORKING · TURNING CENTER CTX BETA 2000 Services : turning of the product for space, avionics and automotive • Max. processing diameter - 550 mm • Max. processing

HIGH-PRECISION METALWORKING · TURNING CENTER CTX BETA 2000 Services : turning of the product for space, avionics and automotive • Max. processing diameter - 550 mm • Max. processing

PUMA VTS series - Dormac CNC Solutions · PUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214

PUMA VTS series - Dormac CNC Solutions · PUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214

fiche 008.001.002.001 - Penthouse · 4 Penthouse 008.001.002.001 min 68 mm max 90 mm min 68 mm max 90 mm 5x A 270 cm min 68 mm max 90 mm min 68 mm max 90 mm 4x B 192 cm min 68 mm

fiche 008.001.002.001 - Penthouse · 4 Penthouse 008.001.002.001 min 68 mm max 90 mm min 68 mm max 90 mm 5x A 270 cm min 68 mm max 90 mm min 68 mm max 90 mm 4x B 192 cm min 68 mm

TUV 25W 1SL/25 - TUV T8 | PHILIPS...TUV TL-D 25W Product D (max) A (max) B (max) B (min) C (max) TUV 25W 1SL/25 28 mm 437.4 mm 444.5 mm 442.1 mm 451.6 mm Photometric data 200 300 400

TUV 25W 1SL/25 - TUV T8 | PHILIPS...TUV TL-D 25W Product D (max) A (max) B (max) B (min) C (max) TUV 25W 1SL/25 28 mm 437.4 mm 444.5 mm 442.1 mm 451.6 mm Photometric data 200 300 400

BOSTONBOSTON V1 Uniform Appearance Petrolio Sabbia Agrilla Cemento Gesso Lavagna Regularity Characteristics 2 3 Required Standards max 2mm ± 50/0 max mm max 1,5 mm max 2 mm max 2

BOSTONBOSTON V1 Uniform Appearance Petrolio Sabbia Agrilla Cemento Gesso Lavagna Regularity Characteristics 2 3 Required Standards max 2mm ± 50/0 max mm max 1,5 mm max 2 mm max 2

Bühler CZ...Solid belt pulley Pulley Multistep band wheel CNC turning and balancing Max. L2 = 1’000 mm Ø D2 = 5–600 mm Max. L1 = 2’000 mm Ø D1 = 10–315 mm Shafts CNC turning

Bühler CZ...Solid belt pulley Pulley Multistep band wheel CNC turning and balancing Max. L2 = 1’000 mm Ø D2 = 5–600 mm Max. L1 = 2’000 mm Ø D1 = 10–315 mm Shafts CNC turning

Pre-Owned Machinery PRODUCT CATALOGUE · Lathes –Vertical CNC Lathe ST-16/22V Classification Unit Vertical CNC Lathe ST-16/22V Swing over bed mm 2,200 Max Turning Diameter mm 2,000

Pre-Owned Machinery PRODUCT CATALOGUE · Lathes –Vertical CNC Lathe ST-16/22V Classification Unit Vertical CNC Lathe ST-16/22V Swing over bed mm 2,200 Max Turning Diameter mm 2,000

PergoTex II/LED · Max. width of 1 unit (1-unit system) 7,000 mm 7,000 mm Max. width of 2 units (multi-section unit) 14,000 mm 14,000 mm Max. projection 6,500 mm 6,500 mm Fabric folding

PergoTex II/LED · Max. width of 1 unit (1-unit system) 7,000 mm 7,000 mm Max. width of 2 units (multi-section unit) 14,000 mm 14,000 mm Max. projection 6,500 mm 6,500 mm Fabric folding

PUMA VTS series - Peekstok · PUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214 Applied

PUMA VTS series - Peekstok · PUMA VTS1620 Turning Diameter Ø 2000 mm ( 78.7 inch ) PUMA VTS1214 Ø 1350 mm ( 53.1 inch ) Max. Turning diameter PUMA VTS1620 PUMA VTS1214 Applied