Technical Drawing CHAPTER 2 By : Aznita Abdullah.
Chapter 5 Pictorial Sketching. Objectives Be able to explain the difference between an axonometric projection and an oblique projection. Be able to explain.
Engineering Drawing ELEC 106 Fundamentals of Electrical Engineering Dr. Ron Hayne Images from Engineering Your Future, Oxford University Press.
Graphics 2: Isometric Sketching From Different View Points ENGR 1182.
EnViSIONS Incorporating Spatial Visualization Curriculum across the United States By: Norma Veurink ([email protected]) AJ Hamlin ([email protected]) Sheryl.
Isometric Sketching From Different View Points ENGR 1182 Graphics 02.
Pictorial Drawings. Axonometric Projections Step by Step: Isometric Sketching.
SKETCHING A sketch is a rapidly executed freehand drawing that is not intended as a finished work. In general, a sketch is a quick way to record an idea.
Graphic CommunicationHomework Design and Technology Department Page 1 10 mm = 1 m 100 mm = 10 m Use the scale given above to obtain the following information.
Welcome to ENGR 1182.03 Nano
Welcome to ENGR 1182.03 Nano ENGR 1182.03 Course Introduction Nano P. 1.
Isometric and Orthographic Drawings