Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

56
We know hydraulics! Pressure Dynamics 18 Tarlton Crescent, Perth International Airport WA 6105 Tel: (08) 9473 7277 Fax: (08) 9473 7298 Email: [email protected] Web: www.pressuredynamics.com.au cast iron & aluminium Gear Pumps & Motors Commercial Hydraulics PREMIER DISTRIBUTOR

Transcript of Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Page 1: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

We know hydraulics!Pressure Dynamics

18 Tarlton Crescent, Perth International Airport WA 6105Tel: (08) 9473 7277 Fax: (08) 9473 7298Email: [email protected]: www.pressuredynamics.com.au

cast iron & aluminiumGear Pumps & Motors

CommercialHydraulics

PREM I E R

DISTRIBUTOR

Page 2: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

PREM I E R

DISTRIBUTOR

Page 3: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Parker Commercial Hydraulics is the world’s leading supplier of OEM hydraulic components, giving your plant and equipment the hydraulic power to keep running day in day out, week after week, year after year.

Pressure Dynamics supports the full range of “GENUINE” components supplied by Parker Commercial Hydraulics, including pumps, motors, valves and spares, backed by premier customer service. Parker Commercial Hydraulic gear pumps are available in single, multiple, piggyback and thru-drive assemblies.

Parker manufacture hydraulic components for a wide range of industries including:

ConstructionRefuse / Dump TruckMaterial HandlingForestryAgricultureIndustrial  

Every minute your machine is idle costs you money, which is why Parker Commercial Hydraulics components give you the power to extract the maximum value from your plant and equipment.

Pressure Dynamics is an authorised Parker Commercial Hydraulics build centre guaranteeing a 24 hour turn around on most pump orders.

We know hydraulics!

Premier Parker Distributor & Authorised Build Centre

18 Tarlton CrescentPerth International Airport, WA, 6105

Tel: (08) 9473 7277 Fax: (08) 9473 7298E-mail: [email protected]

Web: www.pressuredynamics.com.au

cast iron & aluminiumGear Pumps & Motors

CommercialHydraulics

Page 4: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

CommercialHydraulics

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, tel: (08) 9473 7277

Cast Iron Gear Pumps & MotorsPGP Cast Iron Pump Specification Sheet 1

30/31, 50/51, 75/76 Series—Pricing (bearing type) 2

30/31, 50/51, 75/76 Series—Product Codes 3

30/31 Series—Exploded View and Parts List 6

50/51 Series—Exploded View and Parts List 10

75/76 Series—Exploded View and Parts List 14

300 Series—Pricing (bush type) 18

315, 330, 350, 365 Series—Product Codes 19

315 Series—Exploded View and Parts List 23

330 Series—Exploded View and Parts List 27

350 Series—Exploded View and Parts List 31

365 Series—Exploded View and Parts List 35

Standard Seal Kits 39

Aluminium Pumps “Stock Program”500 Series—Characteristics 40

511 Series—SAE ‘A’ 2 bolt, 5/8” Keyed Shaft 41

511 Series—SAE ‘A’ 2 bolt, 3/4” Keyed Shaft 42

511 Series—SAE ’A’ 2 bolt, 5/8 9T Spline 43

511 Series—SAE ‘A’ 2 bolt, 3/4 11T Spline 44

511 Series—DIN 4 bolt, 1:8 Taper Shaft 45

511 Series—Tandem Kits 46

Aluminium Pumps & Motors “Made to Order Program”505 Series—Product Codes 47

511 Series—Product Codes 48

517 Series—Product Codes 49

Truck Pumps

Truck Pump Cross Reference 50

Contents

Page 5: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

05 07 10 12 15 17 20 22 25 27 30

Gear width 1/2” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/4” 2-1/2” 2-3/4” 3”

30/31 Housing size (in) 1.25 1.50 1.75 2.0 2.25 2.50 2.75 3.00 3.25

Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55

Displacement cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60 72.60 80.10

Displacement ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94 4.43 4.89

30 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,250 2,250 2,000 2,000

30 Pressure (Bar) 172 172 172 172 172 155 155 138 138

31 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,200 2,200

31 Pressure (Bar) 207 207 207 207 207 172 172 153 153

50/51 Housing size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25

Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20 82.55

Displacement cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50

Displacement ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38

50 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,000 2,000 2,000 2,000

50 Pressure (Bar) 172 172 172 172 172 138 138 138 138

51 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,500

51 Pressure (Bar) 207 207 207 207 207 207 172 172 172

75/76 Housing size (in) 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00

Housing size (mm) 44.45 50.80 57.15 63.50 69.85 76.20 82.55 88.90 95.25 101.60

Displacement cc/rev 50.40 67.20 84.00 100.80 117.60 134.40 151.20 168.00 184.80 201.60

Displacement ci/rev 3.08 4.10 5.13 6.15 7.18 8.20 9.23 10.25 11.28 12.30

75 Pressure (Psi) 2,500 2,500 2,500 2,500 2,500 2,500 2,250 2,250 2,000 2,000

75 Pressure (Bar) 172 172 172 172 172 172 155 155 138 138

76 Pressure (Psi) 3,000 3,000 3,000 3,000 3,000 2,500 2,500 2,500 2,000 2,000

76 Pressure (Bar) 207 207 207 207 207 172 172 172 138 138

315 Housing size (in) 0.90 1.14 1.40 1.64 1.90 2.14 2.40

Housing size (mm) 22.86 28.96 35.56 41.66 48.26 54.36 60.96

Displacement cc/rev 10.20 15.20 20.30 25.40 30.50 35.60 40.60

Displacement ci/rev 0.62 0.93 1.24 1.55 1.86 2.17 2.48

315 Pressure (Psi) 3,500 3,500 3,500 3,500 3,300 2,900 2,500

315 Pressure (Bar) 241 241 241 241 228 200 172

330 Housing size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50

Housing size (mm) 25.40 31.75 38.10 44.45 50.80 57.15 63.50

Displacement cc/rev 16.10 24.20 32.30 40.40 48.40 56.50 64.60

Displacement ci/rev 0.98 1.48 1.97 2.46 2.95 3.45 3.94

330 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,250 3,000

330 Pressure (Bar) 241 241 241 241 241 224 207

350 Housing size (in) 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00

Housing size (mm) 25.40 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20

Displacement cc/rev 20.90 31.30 41.80 52.20 62.70 73.10 83.60 94.00 104.50

Displacement ci/rev 1.28 1.91 2.55 3.18 3.83 4.46 5.10 5.74 6.38

350 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,250 3,000 2,750 2,500

350 Pressure (Bar) 241 241 241 241 241 224 207 190 172

365 Housing size (in) 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00

Housing size (mm) 31.75 38.10 44.45 50.80 57.15 63.50 69.85 76.20

Displacement cc/rev 44.30 59.00 73.80 88.50 103.50 118.00 132.00 147.50

Displacement ci/rev 2.70 3.60 4.50 5.40 6.30 7.20 8.05 9.00

365 Pressure (Psi) 3,500 3,500 3,500 3,500 3,500 3,500 3,250 3,000

365 Pressure (Bar) 241 241 241 241 241 241 224 207

PGP Cast Iron Pump Specifications

Note: Performance data shown are the average results based on a series of tests of production units and are not necessarily representative of any one unit.

Page 1

Page 6: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

30/31 seriesmodel gear size

P 30/31 1/2” - 2”

M 30/31 1/2” - 2”

Additional Section (motor or pump) 1/2” - 2”

50/51 seriesmodel gear size

P 50/51 3/4” - 2-1/2”

M 50/31 3/4” - 2-1/2”

Additional Section (motor or pump) 3/4” - 2-1/2”

P30/31, 50/51, 75/76 Series Cast Iron Gear Pumps and Motors

75/76 seriesmodel gear size

P 75/76 1/2” - 3”

M 75/76 1/2” - 3”

Additional Section (motor or pump) 1/2” - 3”

Note: All units are made to order. Lead times may vary.

Special modifications 30/31, 50/51, 75/76model 30/31 50/51 75/76

Two speed motor drive - - POA

Add-A-Pump (KO/LO) POA POA POA

Two speed bearing carrier - POA -

Integral shafts (one piece) POA POA POA

Page 2

Page 7: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

30/31 Series Pumps & Motors

For multiple units repeat if necessary

C -1

Code Type

P Pump

M Motor

Series

30 Non Doweled

31 Doweled

Shaft End Cover

Code Description

405 Pump, CW, 6 bolt flange

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

494 Pump, CW, SAE 2 bolt ‘A’

497 Pump, CW, SAE 2 bolt ‘B’

505 Pump, CCW, 6 bolt flange

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

594 Pump, CCW, SAE 2 bolt ‘A’

597 Pump, CCW, SAE 2 bolt ‘B’

605 Pump, Bi-Rot, 6 bolt flange

642 Pump, Bi-Rot, SAE 4 bolt ‘B’

678 Pump, Bi-Rot, SAE 4 bolt ‘C’

694 Pump, Bi-Rot, SAE 2 bolt ‘A’

697 Pump, Bi-Rot, SAE 2 bolt ‘B’

805 Motor, 1/4” NPT drain, 6 bolt flange

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

894 Motor, 1/4” NPT drain, SAE 2 bolt ‘A’

897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

1805 Motor, 1/4” BSPP drain, 6 bolt flange

1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’

1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’

1894 Motor, 1/4” BSPP drain, SAE 2 bolt ‘A’

1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’

Port End Cover

Code Description

BE Unported single section unit

BI Unported tandem section unit

BY Unported single/tandem sec-tion unit w/ extended studs

** Ported port end cover, specify port type & location

Gear Housing

Code Description

AB05 1/2” unported gear housing

AB07 3/4” unported gear housing

AB10 1” unported gear housing

AB12 1-1/4” unported gear housing

AB15 1-1/2” unported gear housing

AB17 1-3/4” unported gear housing

AB20 2” unported gear housing

**07 3/4” ported gear housing, specify port types

**10 1” ported gear housing, specify port types

**12 1-1/4” ported gear housing, specify port types

**15 1-1/2” ported gear housing, specify port types

**17 1-3/4” ported gear housing, specify port types

**20 2” ported gear housing, specify port types

Shaft Type

Code Description

-7 SAE ‘C’ 14 tooth spline 1.25” dia.

-25 SAE ‘B’ 13 tooth spline 0.88” dia.

-30 SAE ‘B’ keyed 0.88” dia.

-43 SAE ‘BB’ keyed 1.00” dia.

-68 6 tooth spline 1.00” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

How to specify

Page 3

Page 8: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

C -1

Code Type

P Pump

M Motor

Series

50 Non Doweled

51 Doweled

Shaft End Cover

Code Description

400 Pump, CW, 4 bolt pad mount

405 Pump, CW, 6 bolt flange

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

497 Pump, CW, SAE 2 bolt ‘B’

498 Pump, CW, SAE 2 bolt ‘C’

500 Pump, CCW, 4 bolt pad mount

505 Pump, CCW, 6 bolt flange

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

597 Pump, CCW, SAE 2 bolt ‘B’

598 Pump, CCW, SAE 2 bolt ‘C’

605 Pump, Bi-Rot, 6 bolt flange

642 Pump, Bi-Rot, SAE 4 bolt ‘B’

678 Pump, Bi-Rot, SAE 4 bolt ‘C’

697 Pump, Bi-Rot, SAE 2 bolt ‘B’

698 Pump, Bi-Rot, SAE 2 bolt ‘C’

805 Motor, 1/4” NPT drain, 6 bolt flange

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’

1805 Motor, 1/4” BSPP drain, 6 bolt flange

1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’

1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’

1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’

1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’

Port End Cover

Code Description

BE Unported single section unit

BI Unported tandem section unit

BY Unported single/tandem sec-tion unit w/ extended studs

** Ported end cover, specify port type & location

Gear Housing

Code Description

AB05 1/2” unported gear housing

AB07 3/4” unported gear housing

AB10 1” unported gear housing

AB12 1-1/4” unported gear housing

AB15 1-1/2” unported gear housing

AB17 1-3/4” unported gear housing

AB20 2” unported gear housing

AB22 2-1/4” unported gear housing

AB25 2-1/2” unported gear housing

**07 3/4” ported gear housing, specify port types

**10 1” ported gear housing, specify port types

**12 1-1/4” ported gear housing, specify port types

**15 1-1/2” ported gear housing, specify port types

**17 1-3/4” ported gear housing, specify port types

**20 2” ported gear housing, specify port types

**22 2-1/4” ported gear housing, specify port types

**25 2-1/2” ported gear housing, specify port types

Shaft Type

Code Description

-7 SAE ‘C’ 14 tooth spline 1.25” dia.

-11 SAE ‘C’ keyed 1.25” dia

-25 SAE ‘B’ 13 tooth spline 0.88” dia.

-43 SAE ‘BB’ keyed 1.00” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

For multiple units repeat if necessary

50/51 Series Pumps & Motors

How to specify

Page 4

Page 9: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

75/76 Series Pumps & Motors

For multiple units repeat if necessary

C -1

Code Type

P Pump

M Motor

Series

75 Non Doweled

76 Doweled

Shaft End Cover

Code Description

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

480 Pump, CW, SAE 4 bolt ‘D’

498 Pump, CW, SAE 2 bolt ‘C’

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

580 Pump, CCW, SAE 4 bolt ‘D’

598 Pump, CCW, SAE 2 bolt ‘C’

642 Pump, Bi-Rot, SAE 4 bolt ‘B’

678 Pump, Bi-Rot, SAE 4 bolt ‘C’

680 Pump, Bi-Rot, SAE 4 bolt ‘D’

698 Pump, Bi-Rot, SAE 2 bolt ‘C’

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

880 Motor, 1/4” NPT drain, SAE 4 bolt ‘D’

898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’

1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’

1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’

1880 Motor, 1/4” BSPP drain, SAE 4 bolt ‘D’

1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’

Port End Cover

Code Description

BE Unported single section unit

BI Unported tandem section unit

BY Unported single/tandem sec-tion unit w/ extended studs

** Ported end cover, specify port type & location

Gear Housing

Code Description

AB07 1/2” unported gear housing

AB10 3/4” unported gear housing

AB12 1” unported gear housing

AB15 1-1/4” unported gear housing

AB17 1-1/2” unported gear housing

AB20 1-3/4” unported gear housing

AB22 2-1/4” unported gear housing

AB25 2-1/2” unported gear housing

AB27 2-3/4” unported gear housing

AB30 3” unported gear housing

**07 3/4” ported gear housing, specify port types

**10 1” ported gear housing, specify port types

**12 1-1/4” ported gear housing, specify port types

**15 1-1/2” ported gear housing, specify port types

**17 1-3/4” ported gear housing, specify port types

**20 2” ported gear housing, specify port types

**22 2-1/4” ported gear housing, specify port types

**25 2-1/2” ported gear housing, specify port types

**27 2-3/4” ported gear housing, specify port types

**30 3” ported gear housing, specify port types

Shaft Type

Code Description

-7 SAE ‘C’ 14 tooth spline 1.25” dia.

-11 SAE ‘C’ keyed 1.25” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

How to specify

Page 5

Page 10: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

30/31 Series

item description

1 Snap Ring

2 Outboard Bearing

Outboard Spacer

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Seal Retainer (motors and c-shafts)

5 Continental Shaft

6 Spacer

7 Retaining Ring

8 Shaft End Cover

9 Check Valve Assembly (for motors and bi-rotational pumps)

Check Plug (pumps only) 

10 Ring Seals

item description

11 Roller Bearings

12 Thrust Plates (motor)  

Thrust Plates (pump)

13 Seal Strip

14 Integral Gear Set 

15 Gasket Seals

16 Gear Housing 

17 Bearing Carrier

18 Connecting Shaft 

19 Gear Set 

20 Port End Cover 

21 Washers 

22 Cap Screws (single units)

Studs (multiple units) 

23 Nuts (multiple units)

24 Dowel Pins (31 series)

Continental shaft only

Integral shaft only

Page 6

Page 11: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

item description part number quantity

1 Snap ring 391-2686-063 1

2 Outboard bearing 391-0381-040 1

Outboard spacer 391-3383-069 1

3 Shaft seal (integral pump) 391-2883-058 1

Shaft seal (c-shaft pump) 391-2883-107 1

Shaft seal (integral motor) 391-2883-119 1

Shaft seal (c-shaft motor) 391-2883-126 1

4 Seal retainer (motors and c-shafts) 391-3381-040 1

5 Continental shaft 312-XXXX-XXX 1

6 Spacer 312-0100-002 1

7 Retaining ring 391-2685-011 1

8 Shaft end cover 312-50XX-XXX 1

9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2

Check plug 391-2286-004 1

10 Ring seals (per section) 391-2585-006 2

11 Roller bearings (per gear section) 391-0381-068 4

12 Thrust plates (motor) per gear section 391-2185-013 2

Thrust plates (pump) per gear section 391-2185-031 2

13 Seal strip (per section) 391-2882-022 (viton) 1

Seal strip (per section) 391-2882-051 (buna) 1

14 Integral gear set 312-29XX-XXX 1

15 Gasket seals (per section) 391-2884-050 2

16 Gear housing 312-82XX-XXX 1

17 Bearing carrier 312-7740-100 specify porting (if required)

1

18 Connecting shaft 312-1133-001 1

19 Gear set 312-28XX-000 1

20 Port end cover 312-XXXX-XXX 1

21 Washers 391-3784-028 4

22 Cap screws (single units only) 391-1401-XXX specify length, in inches

4

Studs (multiple units only) 391-1425-XXX specify length, in inches

4

23 Nuts (multiple units only) 391-1451-076 4

24 Dowel pins (31 series only) per gear section 391-2082-032 4

30/31 Series Pumps & Motors

Page 7

Page 12: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

30/31 Series Pumps & Motors

Continental shafts item description part number

5 SAE 'BB' 15 tooth 1" dia 312-1000-401

SAE 'C' keyed 1.25" dia 991-1356-704

SAE 'C' 14 tooth 1.25" dia 312-1000-502

SAE 'BB' keyed 1" dia modified length 312-1500-400

SAE 'B' keyed with 5/8"-18 thread, 7/8" dia modified length 312-1135-171

SAE 'B' keyed 7/8" dia 312-1500-300

SAE 'B' 13 tooth 7/8" dia 2.1/8" standout 991-1351-132

SAE 'B' 13 tooth 7/8" dia 312-1135-138

SAE 'A' 9 tooth 5/8" dia 991-1353-095

8 tooth spline 7/8" dia power auto PTO 1" standout 991-1353-498

7/8" keyed 312-1135-192

6 tooth 1" dia 312-1000-003

3/4" keyed 312-1135-191

3/4 11 tooth 991-1353-347

10 tooth 11/16" dia 991-1353-039

Shaft end coversitem description part number

8 Pad mount (suit 30 and 31) 312-5017-201

SAE 'B' 2 bolt (suit 30 and 31) 312-5027-201

SAE 'A' 2 bolt (suit 30 and 31) 312-5027-204

SAE 'B' 2 bolt type 2 (suit 30 and 31) 312-5027-205

SAE 'C' 4 bolt w/priming aid valve (P30 series only) lube pumps

312-5033-206

SAE 'B' 4 bolt (suit 30 and 31) 312-5037-201

SAE 'C' 4 bolt (suit 30 and 31) 312-5037-202

6 bolt round w/priming aid valve (P30 series only) lube pumps 312-5043-203

6 bolt round (suit 30 and 31) 312-5047-201

75-30 piggyback shaft end cover 312-5026-204

31-31 & 51-31 piggyback shaft end cover 312-5027-208

76-31 piggyback shaft end cover 312-5027-209

30-30 piggyback shaft end cover 312-5029-210

Gear housingitem description part number

16 1/2" gear - 31.75mm housing 312-8205-100

3/4” gear - 38.10mm housing 312-8207-100

1” gear - 44.5mm housing 312-8210-100

1-1/4” gear - 50.80mm housing 312-8212-100

1-1/2" gear - 57.15mm housing 312-8215-100

1-3/4" gear - 63.50mm housing 312-8217-100

2" gear - 69.85mm housing 312-8220-100

Port end coversitem description part number

20 Port end cover (suit 30 and 31) 312-3220-100

Port end cover for rear ports (suit 30 and 31) 312-3420-100

31-31 piggyback port end cover 312-5027-212

30-30 piggyback port end cover 312-5029-213

Page 8

Page 13: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

30/31 Series Pumps & Motors

Integral gear setsitem description part number

14 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2907-230

3/4" gear set - SAE 'B' keyed 7/8" dia 312-2907-730

3/4" gear set - SAE 'BB' keyed 1" dia 312-2907-740

1" gear set - SAE 'A' 9 tooth 5/8" dia 312-2910-122

1" gear set - SAE 'B' 13 tooth 7/8" dia 312-2910-230

1" gear set - SAE 'BB' 15 tooth 1" dia 312-2910-240

1" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2910-430

1" gear set - SAE 'B' keyed 7/8" dia 312-2910-730

1" gear set - SAE 'BB' keyed 1" dia 312-2910-740

1-1/4" gear set - SAE 'A' 9 tooth 5/8" dia 312-2912-122

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2912-230

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2912-430

1-1/4" gear set - SAE 'B' keyed 7/8" dia 312-2912-730

1-1/4" gear set - SAE 'BB' keyed 1" dia 312-2912-740

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 312-2915-230

1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 312-2915-240

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2915-430

1-1/2" gear set - SAE 'B' keyed 7/8" dia 312-2915-730

1-1/2" gear set - SAE 'BB' keyed 1" dia 312-2915-740

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 312-2917-230

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2917-430

1-3/4" gear set - SAE 'B' keyed 7/8" dia 312-2917-730

1-3/4" gear set - SAE 'BB' keyed 1" dia 312-2917-740

2" gear set - SAE 'B' 13 tooth 7/8" dia 312-2920-230

2" gear set - SAE 'B' 13 tooth 7/8" dia (type 2 only) 312-2920-430

2" gear set - SAE 'B' keyed 7/8" dia 312-2920-730

2" gear set - SAE 'BB' keyed 1" dia 312-2920-740

Gear setsitem description part number

19 1/2" gear set 312-2805-000

3/4" gear set 312-2807-000

1" gear set 312-2810-000

1-1/4" gear set 312-2812-000

1-1/2" gear set 312-2815-000

1-3/4" gear set 312-2817-000

2" gear set 312-2820-000

Page 9

Page 14: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

50/51 Series

Continental shaft only

Integral shaft only

item description

1 Snap Ring

2 Outboard Bearing

Outboard Spacer

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Seal Retainer (motors and c-shafts)

5 Continental Shaft

6 Spacer

7 Retaining Ring

8 Shaft End Cover

9 Check Valve Assembly (for motors and bi-rota-tional pumps)

Check Plug (pumps only) 

10 Ring Seals

item description

11 Roller Bearings

12 Thrust Plates (motor)  

Thrust Plates (pump)

13 Seal Strip

14 Integral Gear Set 

15 Gasket Seals

16 Gear Housing 

17 Bearing Carrier

18 Connecting Shaft 

19 Gear Set 

20 Port End Cover 

21 Washers 

22 Cap Screws (single units)

Studs (multiple units) 

23 Nuts (multiple units)

24 Dowel Pins (51 series)

Page 10

Page 15: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

50/51 Series Pumps & Motors

item description part number quantity

1 Snap ring 391-2686-065 1

2 Outboard bearing 391-0381-077 1

Outboard spacer 391-3383-087 1

3 Shaft seal (integral pump) 391-2883-103 1

Shaft seal (c-shaft pump) 391-2883-133 1

Shaft seal (integral motor) 391-2883-115 1

Shaft seal (c-shaft motor) 391-2883-186 1

4 Seal retainer (motors and c-shafts) 391-3383-020 1

5 Continental shaft 313-XXXX-XXX specify shaft type

1

6 Spacer 313-3381-046 1

7 Retaining ring 391-2685-040 1

8 Shaft end cover 313-50XX-XXX specify mounting type

1

9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2

Check plug 391-2286-004 1

10 Ring seals (per section) 391-2585-009 2

11 Roller bearings (per gear section) 391-0381-059 4

12 Thrust plates (motor) per gear section 391-2185-012 2

Thrust plates (pump) per gear section 391-2185-029 2

13 Seal strip (per section) 391-2882-022 (viton) 1

Seal strip (per section) 391-2882-051 (buna) 1

14 Integral gear set 313-29XX-XXX specify gear width and shaft type

1

15 Gasket seals (per section) 391-2884-021 2

16 Gear housing 313-82XX-XXX specify housing width & ports (if

required)

1

17 Bearing carrier 313-7740-100 specify porting (if required)

1

18 Connecting shaft 313-1133-001 1

19 Gear set 313-28XX-000 specify gear width

1

20 Port end cover 313-3120-100 specify porting (if required)

1

21 Washers 391-3784-028 4

22 Cap screws (single units only) 391-1401-XXX specify length, in inches

4

Studs (multiple units only) 391-1425-XXX specify length, in inches

4

23 Nuts (multiple units only) 391-1451-076 4

24 Dowel pins (51 series only) per gear section 391-2082-032 4

Page 11

Page 16: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

50/51 Series Pumps & Motors

Continental shaftsitem description part number

5 SAE 'C' keyed 1.25" dia no shoulder 313-1500-004

SAE 'C' keyed 1.25" dia 313-1500-500

SAE 'C' 14 tooth 1.25" dia 313-1135-194

SAE 'BB' keyed 1" dia 313-1500-400

SAE 'BB' 15 tooth 1" dia 313-1000-400

SAE 'B' 13 tooth 7/8" dia 313-1000-300

Shafts end coveritem description part number

8 Pad mount (suit 50 and 51) 313-5017-201

SAE 'B' 2 bolt (suit 50 and 51) 313-5027-201

SAE 'C' 2 bolt (suit 50 and 51) 313-5027-202

SAE 'C' 2 bolt type 2 (suit 50 and 51) 313-5027-206

SAE 'C' 4 bolt w/priming aid valve (P50 series only) lube pumps

313-5033-203

SAE 'B' 4 bolt (suit 50 and 51) 313-5037-201

SAE 'C' 4 bolt (suit 50 and 51) 313-5037-202

6 bolt round (suit 50 and 51) 313-5047-201

51-51 piggyback shaft end cover 313-5027-208

76-51 piggyback shaft end cover 313-5027-209

51-31 piggyback shaft end cover 313-5027-212

50-30 piggyback shaft end cover 313-5029-205

Gear housingitem description part number

16 1/2" gear - 31.75mm housing 313-8205-100

3/4" gear - 38.10mm housing 313-8207-100

1" gear - 44.45mm housing 313-8210-100

1-1/4" gear - 50.80mm housing 313-8212-100

1-1/2" gear - 57.15mm housing 313-8215-100

1-3/4" gear - 63.50mm housing 313-8217-100

2" gear - 69.85mm housing 313-8220-100

2-1/4" gear - 76.20mm housing 313-8222-100

2-1/2" gear - 82.55mm housing 313-8225-100

If porting is required please specify port type and size

Page 12

Page 17: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Integral gear setsitem description part number

14 1" gear set - SAE 'B' 13 tooth 7/8" dia 313-2910-230

1" gear set - SAE 'C' 14 tooth 1.25" dia 313-2910-250

1" gear set - SAE 'C' keyed 1.25" dia 313-2910-750

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2912-230

1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2912-250

1-1/4" gear set - SAE 'BB' keyed 1" dia 313-2912-740

1-1/4" gear set - SAE 'C' keyed 1.25" dia 313-2912-750

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2915-230

1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2915-250

1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia (type 2 only) 313-2915-330

1-1/2" gear set - SAE 'BB' keyed 1" dia 313-2915-740

1-1/2" gear set - SAE 'C' keyed 1.25" dia 313-2915-750

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2917-230

1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2917-250

1-3/4" gear set - SAE 'BB' keyed 1" dia 313-2917-740

1-3/4" gear set - SAE 'C' keyed 1.25" dia 313-2917-750

2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2920-230

2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2920-250

2" gear set - SAE 'BB' keyed 1" dia 313-2920-740

2" gear set - SAE 'C' keyed 1.25" dia 313-2920-750

2-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 313-2922-230

2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 313-2922-250

2-1/4" gear set - SAE 'C' keyed 1.25" dia 313-2922-750

2-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 313-2925-230

2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 313-2925-250

2-1/2" gear set - SAE 'BB' keyed 1" dia 313-2925-740

2-1/2" gear set - SAE 'C' keyed 1.25" dia 313-2925-750

Gear sets19 1/2" gear set 313-2805-000

3/4" gear set 313-2807-000

1" gear set 313-2810-000

1-1/4" gear set 313-2812-000

1-1/2" gear set 313-2815-000

1-3/4" gear set 313-2817-000

2" gear set 313-2820-000

2-1/4" gear set 313-2822-000

2-1/2" gear set 313-2825-000

50/51 Series Pumps & Motors

Page 13

Page 18: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

75/76 Series

item description

1 Snap Ring

2 Outboard Bearing

Outboard Spacer

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Seal Retainer (motor)

5 Continental Shaft

6 Spacer

7 Retaining Ring

8 Shaft End Cover

9 Check Valve Assembly (for motors andbi-rotational pumps)

item description

Check Plug (pumps only) 

10 Ring Seals

11 Roller Bearings

12 Thrust Plates (motor)  

Thrust Plates (pump)

13 Seal Strip

14 Integral Gear Set 

15 Gasket Seals

16 Gear Housing 

17 Bearing Carrier

18 Connecting Shaft 

19 Gear Set 

20 Port End Cover 

21 Washers 

22 Cap Screws (single units)

Studs (multiple units) 

23 Nuts (multiple units)

24 Dowel Pins (76 series)

25 ‘O’ Ring

Page 14

Page 19: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

75/76 Series Pumps & Motors

item description part number quantity

1 Retaining ring 391-2686-025 1

2 Outboard bearing 391-0381-078 1

Outboard spacer 391-3383-018 1

3 Shaft seal (pump) 391-2883-052 1

Shaft seal (motor) 391-2883-094 1

4 Seal retainer (pump)  391-2584-082   

Seal retainer (motor) 391-2584-051 1

5 Continental shaft 316-XXXX-XXX specify shaft type

1

6 Spacer 313-3381-039 1

7 Retaining ring 391-2685-029 1

8 Shaft end cover 316-50XX-XXX specify mounting type

1

9 Check valve assembly (for motors & bi-rotational pumps) 391-3681-001 2

Check plug 391-2286-004 1

10 Ring seals (per section) 391-2585-011 2

11 Roller bearings (per gear section) 391-0381-060 4

12 Thrust plates (motor) per gear section 391-2185-020 2

Thrust plates (pump) per gear section 391-2185-026 2

13 Seal strip (per section) 391-2882-019 (viton) 1

Seal strip (per section) 391-2882-084 (buna) 1

14 Integral gear set 316-29XX-XXX specify gear width and shaft type

1

15 Gasket seals (per section) 391-2884-021 2

16 Gear housing 316-82XX-XXXspecify housing width and ports (if

required)

1

17 Bearing carrier 316-7XXX-XXXspecify porting (if required)

1

18 Connecting shaft 316-1133-001 1

19 Gear set 316-28XX-000specify gear width

1

20 Port end cover 316-3120-100specify porting (if required)

1

21 Washers 391-3784-028 4

22 Cap screws (single units only) 391-1401-XXX specify length, in inches

4

Studs (multiple units only) 391-1425-XXXspecify length, in inches

4

23 Nuts (multiple units only) 391-1451-076 4

24 Dowel pins (76 series only) per gear section 391-2082-033 4

25 ‘O’ Ring N0674 2-146  1

Page 15

Page 20: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

75/76 Series Pumps & Motors

Continental shaftsitem description part number

5 SAE 'C' keyed 1.25" dia 316-1135-147

SAE 'C' 14 tooth 1.25" dia 316-1135-148

SAE 'D' 13 tooth 1.75" dia 316-1000-701

SAE 'C' 14 tooth 1.25" dia extra long 991-1357-007

Shaft end coversitem description part number

8 SAE 'C' 2 bolt (suit 75 and 76) 316-5027-202

SAE 'B' 4 bolt (suit 75 and 76) 316-5037-201

SAE 'C' 4 bolt (suit 75 and 76) 316-5037-202

SAE 'D' 4 bolt (suit 75 and 76) 316-5037-203

Gear housingitem description part number

16 3/4" gear - 38.10mm housing 316-8207-100

1" gear - 44.45mm housing 316-8210-100

1-1/4" gear - 50.80mm housing 316-8212-100

1-1/2" gear - 57.15mm housing 316-8215-100

1-3/4" gear - 63.50mm housing 316-8217-100

2" gear - 69.85mm housing 316-8220-100

2-1/4" gear - 76.20mm housing 316-8222-100

2-1/2" gear - 82.55mm housing 316-8225-100

2-3/4" gear - 82.55mm housing 316-8227-100

3" gear - 82.55mm housing 316-8230-100

If porting is required please specify port type and size

Port end coversitem description part number

20 Port end cover (suit 75 and 76) 316-3120-100

Piggy back port end cover (suit 75 and 76) 316-5027-213

Integral gear setsitem description part number

14 1" gear set - SAE 'C' 14 tooth 1.25" dia 316-2910-250

1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2912-250

1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2915-250

1-1/2" gear set - SAE 'C' keyed 1.25" dia 316-2915-750

1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2917-250

1-3/4" gear set - SAE 'C' keyed 1.25" dia 316-2917-750

2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2920-250

2" gear set - SAE 'C' keyed 1.25" dia 316-2920-750

2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2922-250

2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 316-2925-250

2-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 316-2927-250

3" gear set - SAE 'C' 14 tooth 1.25" dia 316-2930-250

3" gear set - SAE 'C' keyed 1.25" dia 316-2930-750

Page 16

Page 21: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

75/76 Series Pumps & Motors

Gear setsitem description part number

19 3/4" gear set 316-2807-000

1" gear set 316-2810-000

1-1/4" gear set 316-2812-000

1-1/2" gear set 316-2815-000

1-3/4" gear set 316-2817-000

2" gear set 316-2820-000

2-1/4" gear set 316-2822-000

2-1/2" gear set 316-2825-000

2-3/4" gear set 316-2827-000

3" gear set 316-2830-000

Page 17

Page 22: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

P300 Series Cast Iron Gear Pumps & Motors

Pumpsmodel gear size

P 315 1/2" - 2"

P 330 1/2" - 2"

Additional section 1/2” - 2”

P 350 3/4" - 2.1/2"

Additional section 3/4” - 2.1/2”

P 365 3/4" - 2.1/2"

Motorsmodel gear size

M 315 1/2" - 2"

M 330 1/2" - 2"

Additional section 1/2” - 2”

M 350 3/4" - 2.1/2"

Additional section 3/4” - 2.1/2”

M 365 3/4" - 2.1/2"

Modificationsspecial modifications 315 330 350 365

Add-A-Pump - - POA POA

Manual two speed motor valve - - - POA

Hydraulic two speed motor valve - - - POA

Integral shaft (one-piece) - POA POA POA

All prices exclude GST.

Page 18

Page 23: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

315 -1

Code Type

P Pump

M Motor

Unit

Code Type

A Single unit

B Tandem unit

L Unit w/ extended studs

Shaft End Cover

Code Description

193 Pump, CW, SAE 2 bolt ‘A’

196 Pump, CW, SAE 2 bolt ‘B’

293 Pump, CCW, SAE 2 bolt ‘A’

296 Pump, CCW, SAE 2 bolt ‘B’

993 Motor, 1/4” NPT drain, SAE 2 bolt ‘A’

996 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

Port End Cover

Code Description

BI Unported

** Ported port end cover, specify port type & location

Gear Housing

Code Description

AB05 1/2” unported gear housing pump

AB07 3/4” unported gear housing pump

AB10 1” unported gear housing pump

AB12 1-1/4” unported gear housing pump

AB15 1-1/2” unported gear housing pump

AB17 1-3/4” unported gear housing pump

AB20 2” unported gear housing pump

EB05 1/2” unported gear housing motor

EB07 3/4” unported gear housing motor

EB10 1” unported gear housing motor

EB12 1-1/4” unported gear housing motor

EB15 1-1/2” unported gear housing motor

EB17 1-3/4” unported gear housing motor

EB20 2” unported gear housing motor

Shaft Type

Code Description

-97 SAE ‘A’ keyed 0.62” dia.

-96 SAE ‘A’ 9 tooth spline 0.62” dia.

-66 SAE ‘B’ keyed 0.88” dia.

-65 SAE ‘B’ tooth spline 0.88” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

** Ported bearing carrier, specify port types & location

For multiple units repeat if necessary

315 Series Pumps & Motors

How to specify

Page 19

Page 24: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

330 Series Pumps & Motors

For multiple units repeat if necessary

Code Type

P Pump

M Motor

330 -1

Unit

Code Type

CA Single unit

CB Tandem unit

CL Unit w/ extended studs

Shaft End Cover

Code Description

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

497 Pump, CW, SAE 2 bolt ‘B’

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

597 Pump, CCW, SAE 2 bolt ‘B’

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’

1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’

1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’

Port End Cover

Code Description

BI Unported port end cover (pump)

BA Unported port end cover (motor)

** Ported port end cover, specify port type & location

Gear Housing

Code Description

AB05 1/2” unported gear housing pump

AB07 3/4” unported gear housing pump

AB10 1” unported gear housing pump

AB12 1-1/4” unported gear housing pump

AB15 1-1/2” unported gear housing pump

AB17 1-3/4” unported gear housing pump

AB20 2” unported gear housing pump

EB05 1/2” unported gear housing motor

EB07 3/4” unported gear housing motor

EB10 1” unported gear housing motor

EB12 1-1/4” unported gear housing motor

EB15 1-1/2” unported gear housing motor

EB17 1-3/4” unported gear housing motor

EB20 2” unported gear housing motor

Shaft Type

Code Description

-7 SAE ‘C’ tooth spline 1.25” dia.

-25 SAE ‘B’ 13 tooth spline 0.88” dia.

-30 SAE ‘B’ keyed 0.88” dia.

-43 SAE ‘BB’ keyed 1.00” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

How to specify

Page 20

Page 25: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

350 Series Pumps & Motors

For multiple units repeat if necessary

350 -1

Code Type

P Pump

M Motor

Unit

Code Type

CA Single unit

CB Tandem unit

CL Unit w/ extended studs

Shaft End Cover

Code Description

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

497 Pump, CW, SAE 2 bolt ‘B’

498 Pump, CW, SAE 2 bolt ‘C’

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

597 Pump, CCW, SAE 2 bolt ‘B’

598 Pump, CCW, SAE 2 bolt ‘C’

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’

1842 Motor, 1/4” BSPP drain, SAE 4 bolt ‘B’

1878 Motor, 1/4” BSPP drain, SAE 4 bolt ‘C’

1897 Motor, 1/4” BSPP drain, SAE 2 bolt ‘B’

1898 Motor, 1/4” BSPP drain, SAE 2 bolt ‘C’

Port End Cover

Code Description

BI Unported

IB Unported port end cover (CCW pump)

BA Unported port end cover (motor)

** Ported port end cover, specify port type & location

Gear Housing

Code Description

AB05 1/2” unported gear housing pump

AB07 3/4” unported gear housing pump

AB10 1” unported gear housing pump

AB12 1-1/4” unported gear housing pump

AB15 1-1/2” unported gear housing pump

AB17 1-3/4” unported gear housing pump

AB20 2” unported gear housing pump

AB22 2-1/4” unported gear housing pump

AB25 2-1/2” unported gear housing pump

EB10 1” unported gear housing motor

EB12 1-1/4” unported gear housing motor

EB15 1-1/2” unported gear housing motor

EB17 1-3/4” unported gear housing motor

EB20 2” unported gear housing motor

EB22 2-1/4” unported gear housing motor

EB25 2-1/2” unported gear housing motor

Shaft Type

Code Description

-7 SAE ‘C’ 14 tooth spline 1.25” dia.

-11 SAE ‘C’ 13 keyed 1.25” dia.

-25 SAE ‘B’ 13 tooth spline 0.88” dia.

-43 SAE ‘BB’ keyed 1.00” dia.

-98 SAE ‘BB’ 15 tooth spline 1.00” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

How to specify

Page 21

Page 26: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

365 Series Pumps & Motors

365 -1

Code Type

P Pump

M Motor

Unit

Code Type

CA Single unit

CB Tandem unit

CL Unit w/ extended studs

Shaft End Cover

Code Description

442 Pump, CW, SAE 4 bolt ‘B’

478 Pump, CW, SAE 4 bolt ‘C’

497 Pump, CW, SAE 2 bolt ‘B’

498 Pump, CW, SAE 2 bolt ‘C’

542 Pump, CCW, SAE 4 bolt ‘B’

578 Pump, CCW, SAE 4 bolt ‘C’

597 Pump, CCW, SAE 2 bolt ‘B’

598 Pump, CCW, SAE 2 bolt ‘C’

842 Motor, 1/4” NPT drain, SAE 4 bolt ‘B’

878 Motor, 1/4” NPT drain, SAE 4 bolt ‘C’

897 Motor, 1/4” NPT drain, SAE 2 bolt ‘B’

898 Motor, 1/4” NPT drain, SAE 2 bolt ‘C’

Port End Cover

Code Description

BI Unported port end cover(CW Pump)

IB Unported port end cover (CCW pump)

BA Unported port end cover (motor)

** Ported port end cover, specify port type & location

Gear Housing

Code Description

AB07 3/4” unported gear housing pump

AB10 1” unported gear housing pump

AB12 1-1/4” unported gear housing pump

AB15 1-1/2” unported gear housing pump

AB17 1-3/4” unported gear housing pump

AB20 2” unported gear housing pump

AB22 2-1/4” unported gear housing pump

AB25 2-1/2” unported gear housing pump

EB12 1-1/4” unported gear housing motor

EB15 1-1/2” unported gear housing motor

EB17 1-3/4” unported gear housing motor

EB20 2” unported gear housing motor

EB22 2-1/4” unported gear housing motor

EB25 2-1/2” unported gear housing motor

Shaft Type

Code Description

-7 SAE ‘C’ 14 tooth spline 1.25” dia.

-11 SAE ‘C’ 13 keyed 1.25” dia.

Connecting Shaft

Code Type

-1 Connecting shaft / multiple units only

Bearing Carrier

Code Description

C Clockwise

D Counter clockwise

** Ported bearing carrier, specify port types & location

For multiple units repeat if necessaryHow to specify

Page 22

Page 27: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

315 Series

item description

8 Integral Gear Set

9 Gasket Seals

10 Dowel Pins

11 Gear Housing

12 Bearing Carrier

13 Connecting Shaft

14 Gear Set

15 Port End Cover

16 Cap Screws (single units)

Studs (multiple units)

17 Washers

18 Nuts (multiple units)

item description

1 Shaft Seal (pump)

Shaft Seal (motor)

2 Shaft End Cover

3 Check Valves (motor)

4 Bushings

5 Back up Seals

6 Channel Seals

7 Thrust Plates (pump)

Thrust Plate (motor)

Page 23

Page 28: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

item description part number quantity

1 Shaft seal (pump) 391-2883-151 1

Shaft seal (motor) 391-2883-156 1

2 Shaft end cover (pump) available in 2 bolt SAE ‘A’ or ‘B’ 326-5029-20X specify mounting type

1

Shaft end cover (motor) available in 2 bolt SAE ‘A’ or ‘B’ 326-5029-40X specify mounting type

1

3 Check valves (motor only) 391-3681-001 2

4 Bushings (per gear section) 391-0482-195 4

5 Back up seals (pump) per gear section 391-2883-169 2

6 Channel seals (pump) per gear section 391-2883-168 2

5 Back up seals (motor) per gear section 391-2881-995 2

7 End channel seals (motor) per gear section 391-2881-996 4

Side channel seals (motor) per gear section 391-2881-997 4

8 Thrust plates (pump) per gear section 391-2185-063 2

Thrust plates (motor) per gear section 391-2185-070 2

9 Integral gear set 326-29XX-XXX specify gear width and shaft type

1

10 Gasket seals (pump) per gear section 391-2881-968 2

Gasket seals (motor) per gear section 391-2881-429 2

11 Dowel pins (per gear section) 391-2082-071 4

12 Gear housing (pump) 326-81XX-100 specify housing width

1

Gear housing (motor) 326-82XX-100 specify housing width

1

13 Bearing carrier 326-7XXX-XXX specify porting required

1

14 Connecting shaft 326-1133-001 1

15 Gear set 326-28XX-000 specify gear width

1

16 Port end cover 326-30XX-XXX specify porting required

1

17 Cap screws (single units) 391-1401-XXX specify length, in inches

4

Studs (multiple units) 391-1426-XXX specify length, in inches

4

18 Washers 391-3782-132 4

19 Nuts 391-1451-051 4

315 Series Pumps & Motors

Page 24

Page 29: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

315 Series Pumps & Motors

Shaft end coversitem description part number

2 SAE 'B' 2 bolt (pump only) 326-5029-203

SAE 'A' 2 bolt (pump only) 326-5029-204

SAE 'B' 2 bolt (motor only) 326-5029-403

SAE 'A' 2 bolt (motor only) 326-5029-404

Gear housingitem description part number

11 1/2" gear - 22.75mm housing 326-8105-100

3/4" gear - 29.10mm housing 326-8107-100

1" gear - 35.45mm housing 326-8110-100

1-1/4" gear - 41.80mm housing 326-8112-100

1-1/2" gear - 48.15mm housing 326-8115-100

1-3/4" gear - 54.50mm housing 326-8117-100

2" gear - 60.85mm housing 326-8120-100

1/2" gear - 22.75mm housing (motor only) 326-8205-100

3/4" gear - 29.10mm housing (motor only) 326-8207-100

1" gear - 35.45mm housing (motor only) 326-8210-100

1-1/4" gear - 41.80mm housing (motor only) 326-8212-100

1-1/2" gear - 48.15mm housing (motor only) 326-8215-100

1-3/4" gear - 54.50mm housing (motor only) 326-8217-100

2" gear - 60.85mm housing (motor only) 326-8220-100

If porting is required please specify port type and size

Port end coversitem description part number

15 Port end cover no ports 326-3000-100

Port end cover - motor side ports 326-3020-100

Port end cover - large pad pump 326-3030-095

Port end cover - pump side ports 326-3030-100

If porting is required please specify port type and size

Bearing carriersitem description part number

12 Bearing carrier single and combined - large pad 326-7100-098

Bearing carrier single outlet 326-7100-100

Bearing carrier dual outlet 326-7300-100

If porting is required please specify port type and size

Page 25

Page 30: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

315 Series Pumps & Motors

Integral gear setsitem description part number

8 1/2" gear set - SAE 'A' 9 tooth 5/8" dia 326-2905-420

1/2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2905-430

1/2" gear set - SAE 'B' Keyed 7/8" dia 326-2905-930

3/4" gear set - SAE 'A' 9 tooth 5/8" dia 326-2907-420

3/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2907-430

3/4" gear set - SAE 'A' Keyed 5/8" dia 329-2907-920

3/4" gear set - SAE 'B' Keyed 7/8" dia 326-2907-930

1" gear set - SAE 'A' 9 tooth 5/8" dia 326-2910-420

1" gear set - SAE 'B' 13 tooth 7/8" dia 326-2910-430

1" gear set - SAE 'B' Keyed 7/8" dia 326-2910-930

1-1/4" gear set - SAE 'A' 9 tooth 5/8" dia 326-2912-420

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2912-430

1-1/4" gear set - SAE 'B' Keyed 7/8" dia 326-2912-930

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2915-430

1-1/2" gear set - SAE 'B' Keyed 7/8" dia 326-2915-930

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 326-2917-430

1-3/4" gear set - SAE 'B' Keyed 7/8" dia 326-2917-930

2" gear set - SAE 'B' 13 tooth 7/8" dia 326-2920-430

2" gear set - SAE 'B' Keyed 7/8" dia 326-2920-930

Gear setsitem description part number

14 1/2" gear set 326-2805-000

3/4" gear set 326-2807-000

1" gear set 326-2810-000

1-1/4" gear set 326-2812-000

1-1/2" gear set 326-2815-000

1-3/4" gear set 326-2817-000

2" gear set 326-2820-000

Page 26

Page 31: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

330 Series

item description

9 Thrust Plates (pump)

Thrust Plates (motor)

10 Integral Gear Set

11 Gasket Seals (pump)

Gasket Seals (motor)

12 Dowel Pins

13 Gear Housing (pump)

Gear Housing (motor)

14 Bearing Carrier

15 Connecting Shaft

16 Gear Set

17 Port End Cover

18 Cap Screws (single units)

Studs (multiple units)

19 Washers

20 Nuts

21 Continental Shaft

22 Spacer

23 Retaining Ring

24 Seal Retainer (motors and c-shafts)

item description

1 Snap Ring

2 Outboard Bearing

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Shaft End Cover

5 Check Valve Assembly (motor)

Check Plug (pumps only)

6 Bushings

7 Back Up Seals

8 Channel Seals

Continental shaft only

Page 27

Page 32: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

330 Series Pumps & Motors

item description part number quantity

1 Snap ring 391-2686-063 1

2 Outboard bearing 391-0381-040 1

3 Shaft seal (integral pump) 391-2883-058 1

Shaft seal (c-shaft pump) 391-2883-107 1

Shaft seal (integral motor) 391-2883-119 1

Shaft seal (c-shaft motor) 391-2883-126 1

4 Shaft end cover 324-50XX-XXX specify mounting type

1

5 Check valve assembly (motor) 391-3681-001 2

Check plug (pumps only 391-2286-004 1

6 Bushings (per gear section) 391-0482-306 4

7 Back up seals (pump) per gear section 391-2883-167 2

8 Channel seals (pump) per gear section 391-2883-166 2

9 Back up seals (motor) per gear section 391-2881-929 2

10 End channel seals (motor) per gear section 391-2881-930 4

Side channel seals (motor) per gear section 391-2881-931 4

11 Thrust plates (pump) per gear section 391-2185-056 2

Thrust plates (motor) per gear section 391-2185-065 2

12 Integral gear set 324-29XX-XXX specify gear width and shaft type

1

13 Gasket seals (pump) per gear section 391-2884-050 2

Gasket seals (motor) per gear section 391-2884-076 2

14 Dowel pins (per gear section) 391-2082-032 4

15 Gear housing (pump) 324-81XX-100 specify housing width

1

Gear housing (motor) 324-82XX-100 specify housing width

1

16 Bearing carrier 324-7XXX-XXX specify porting required

1

17 Connecting shaft 324-1133-001 1

18 Gear set 324-28XX-000 specify gear width

1

19 Port end cover 324-30XX-XXX specify porting required

1

20 Cap screws (single units) 391-1401-XXX specify length, in inches

4

Studs (multiple units) 391-1425-XXX specify length, in inches

4

21 Washers 391-3784-028 4

22 Nuts 391-1451-076 4

23 Continental shaft 324-XXXX-XXX specify shaft type

1

24 Spacer 312-0100-002 1

25 Retaining ring 391-2685-011 1

26 Seal retainer (motors and c-shafts) 391-3381-040 1

Page 28

Page 33: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

330 Series Pumps & Motors

Continental shaftitem description part number

21 SAE 'BB' keyed 1" dia 324-1500-400

SAE 'C' 14 tooth 1.25" dia 324-1000-500

SAE 'B' 13 tooth 7/8" dia 324-1000-300

SAE 'B' keyed 7/8" dia 324-1500-300

SAE 'C' keyed 1.25" dia 324-1500-502

8 tooth 36mm Sq DIN 5462 324-1000-002

Connecting shaftitem description part number

 15 Connecting shaft 330-315 (for Piggyback housing) 324-1133-004

Integral gear setsitem description part number

10 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2907-230

3/4" gear set - SAE 'BB" keyed 1" dia 324-2907-740

1" gear set - SAE 'B' 13 tooth 7/8" dia 324-2910-230

1" gear set - SAE 'BB' 15 tooth 1" dia 324-2910-240

1" gear set - SAE 'BB' keyed 1" dia 324-2910-740

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2912-230

1-1/4" gear set - SAE 'BB' 15 tooth 1" dia 324-2912-240

1-1/4" gear set - SAE 'BB' keyed 1" dia 324-2912-740

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 324-2915-230

1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 324-2915-240

1-1/2" gear set - SAE 'BB' keyed 1" dia 324-2915-740

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 324-2917-230

1-3/4" gear set - SAE 'BB' 15 tooth 1" dia 324-2917-240

1-3/4" gear set - SAE 'BB' keyed 1" dia 324-2917-740

2" gear set - SAE 'B' 13 tooth 7/8" dia 324-2920-230

2" gear set - SAE 'BB' 15 tooth 1" dia 324-2920-240

2" gear set - SAE 'BB' keyed 1" dia 324-2920-740

Gear setsitem description part number

16 1/2" gear set 324-2805-000

3/4" gear set 324-2807-000

1" gear set 324-2810-000

1-1/4" gear set 324-2812-000

1-1/2" gear set 324-2815-000

1-3/4" gear set 324-2817-000

2" gear set 324-2820-000

Page 29

Page 34: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

330 Series Pumps & Motors

Shaft end coversitem description part number

4 SAE 'B' 2 bolt (pump only) 324-5023-201

SAE 'B' 2 bolt (motor only) 324-5023-301

SAE 'B' 4 bolt (pump only) 324-5033-201

SAE 'C' 4 bolt (pump only) 324-5033-202

"ZF" 4 bolt 80mm pilot 324-5033-205

SAE 'B' 4 bolt (motor only) 324-5033-301

SAE ‘C' 4 bolt (motor only) 324-5033-302

Gear housingitem description part number

13 1/2" gear - 25.40mm housing 324-8105-100

3/4" gear - 31.75mm housing 324-8107-100

1" gear - 38.10mm housing 324-8110-100

1-1/4" gear - 44.45mm housing 324-8112-100

1-1/2" gear - 50.80mm housing 324-8115-100

1-3/4" gear - 57.15mm housing 324-8117-100

2" gear - 63.50mm housing 324-8120-100

1/2" gear - 25.40mm housing (motor only) 324-8205-100

3/4" gear - 31.75mm housing (motor only) 324-8207-100

1" gear - 38.10mm housing (motor only) 324-8210-100

1-1/4" gear - 44.45mm housing (motor only) 324-8212-100

1-1/2" gear - 50.80mm housing (motor only) 324-8215-100

1-3/4" gear - 57.15mm housing (motor only) 324-8217-100

2" gear - 63.50mm housing (motor only) 324-8220-100

Port end coversitem description part number

17 Port end cover no ports 324-3000-100

Port end cover - pump large pad 324-3010-095

Port end cover - pump side ports 324-3010-100

Port end cover - priority / relief combination 324-3018-100

Port end cover - motor side ports 324-3020-100

Port end cover - pump rear ports 324-3031-100

Piggyback housing 330-315 CW 324-3050-100

Piggyback housing 330-315 CCW 324-3060-100

If porting is required please specify port type and size

Bearing carriersitem description part number

14 Bearing carrier single and combined 324-7100-100

Bearing carrier - motor only 324-7200-100

Bearing carrier dual outlet - large pad inlet 324-7300-099

Bearing carrier dual outlet 324-7300-100

If porting is required please specify port type and size

Page 30

Page 35: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

350 Series

item description

1 Snap Ring

2 Outboard Bearing

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Shaft End Cover

5 Check Valve Assembly (motor)

Check Plug (pumps only)

6 Bushings

7 Back Up Seals

8 Channel Seals

Continental shaft only

item description

9 Thrust Plates (pump)

Thrust Plates (motor)

10 Integral Gear Set

11 Gasket Seals (pump)

Gasket Seals (motor)

12 Dowel Pins

13 Gear Housing (pump)

Gear Housing (motor)

14 Bearing Carrier

15 Connecting Shaft

16 Gear Set

17 Port End Cover

18 Cap Screws (single units)

18 Studs (multiple units)

19 Washers

20 Nuts

21 Continental Shaft

22 Spacer

23 Retaining Ring

24 Seal Retainer (motors and c-shafts)

Page 31

Page 36: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

350 Series Pumps & Motors

item description part number quantity

1 Snap ring 391-2686-065 1

2 Outboard bearing 391-0381-077 1

3 Shaft seal (integral pump) 391-2883-103 1

Shaft seal (c-shaft pump) 391-2883-133 1

Shaft seal (integral motor) 391-2883-115 1

Shaft seal (c-shaft motor) 391-2883-186 1

4 Shaft end cover 323-50XX-XXX specify mounting type

1

5 Check valve assembly (motor) 391-3681-001 2

Check plug (pumps only) 391-2286-004 1

6 Bushings (per gear section) 391-0482-308 4

7 Back up seals (pump) per gear section 391-2882-139 2

8 Channel seals (pump) per gear section 391-2882-140 2

Back up seals (motor) per gear section 391-2885-075 2

9 End channel seals (motor) per gear section 391-2885-074 4

Side channel seals (motor) per gear section 391-2885-073 4

10 Thrust plates (pump) per gear section 391-2185-057 2

Thrust Plates (motor) per gear section 391-2185-068 2

11 Integral gear set 323-29XX-XXX specify gear width and shaft type

1

12 Gasket seals (pump) per gear section 391-2884-074 2

Gasket seals (motor) per gear section 391-2884-021 2

13 Dowel pins (per gear section 391-2082-032 4

14 Gear housing (pump) 323-81XX-100 specify housing width

1

Gear housing (motor) 323-82XX-100 specify housing width

1

15 Bearing carrier 323-7XXX-XXX specify porting required

1

16 Connecting shaft 323-1133-001 1

17 Gear set 323-28XX-000 specify gear width

1

18 Port end cover 323-30XX-XXX specify porting required

1

19 Cap screws (single units) 391-1401-XXX specify length, in inches

4

Studs (multiple units) 391-1425-XXX specify length, in inches

4

20 Washers 391-3784-028 4

21 Nuts 391-1451-076 4

22 Continental shaft 323-XXXX-XXX specify shaft type

1

23 Spacer 312-0100-002 1

24 Retaining ring 391-2685-011 1

25 Seal retainer (motors and c-shafts) 391-3381-040 1

Page 32

Page 37: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

350 Series Pumps & Motors Continental shaft

item description part number

21 SAE 'BB' 15 tooth 1" dia 323-1000-401

8 tooth 36mm Sq DIN 5462 323-1000-002

SAE 'B' 13 tooth 7/8" dia 323-1000-300

SAE 'C' keyed 1.25" dia 323-1500-500

SAE 'C' keyed 1.25" dia etra long 323-1500-502

SAE 'C' 14 tooth 1.25" dia 323-1000-501

Connecting shaft 15 Connecting shaft A spline (suits Add-A-Pump port end covers) 323-1133-002

Connecting shaft B spline (suits Add-A-Pump port end covers) 323-1133-003

Connecting shaft (for piggyback housing) 323-1133-006

Integral gear sets10 3/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2907-230

3/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2907-250

1" gear set - SAE 'C' 14 tooth 1.25" dia 323-2910-250

1" gear set - SAE 'C' keyed 1.25" dia 323-2910-750

1-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2912-230

1-1/4" gear set - SAE 'BB' 15 tooth 1" dia 323-2912-240

1-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2912-250

1-1/4" gear set - SAE 'C' keyed 1.25" dia 323-2912-750

1-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2915-230

1-1/2" gear set - SAE 'BB' 15 tooth 1" dia 323-2915-240

1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2915-250

1-1/2" gear set - SAE 'C' keyed 1.25" dia 323-2915-750

1-3/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2917-230

1-3/4" gear set - SAE 'BB' 15 tooth 1" dia 323-2917-240

1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2917-250

1-3/4" gear set - SAE 'C' keyed 1.25" dia 323-2917-750

2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2920-230

2" gear set - SAE 'BB' 15 tooth 1" dia 323-2920-240

2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2920-250

2" gear set - SAE 'C' keyed 1.25" dia 323-2920-750

2-1/4" gear set - SAE 'B' 13 tooth 7/8" dia 323-2922-230

2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 323-2922-250

2-1/4" gear set - SAE 'C' keyed 1.25" dia 323-2922-750

2-1/2" gear set - SAE 'B' 13 tooth 7/8" dia 323-2925-230

2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 323-2925-250

2-1/2" gear set - SAE 'C' keyed 1.25" dia 323-2925-750

Gear sets16 1/2" gear set 323-2805-000

3/4" gear set 323-2807-000

1" gear set 323-2810-000

1-1/4" gear set 323-2812-000

1-1/2" gear set 323-2815-000

1-3/4" gear set 323-2817-000

2" gear set 323-2820-000

2-1/4" gear set 323-2822-000

2-1/2" gear set 323-2825-000

Page 33

Page 38: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

350 Series Pumps & Motors

Shaft end coversitem description part number

4 SAE 'B' 2 bolt 323-5023-201

SAE 'C' 2 bolt 323-5023-202

SAE 'B' 4 bolt 323-5033-201

SAE 'C' 4 bolt 323-5033-202

"ZF" 4 bolt 80mm pilot 323-5033-205

Gear housingitem description part number

 13 1/2" gear - 25.40mm housing 323-8105-100

3/4" gear - 31.75mm housing 323-8107-100

1" gear - 38.10mm housing 323-8110-100

1-1/4" gear - 44.45mm housing 323-8112-100

1-1/2" gear - 50.80mm housing 323-8115-100

1-3/4" gear - 57.15mm housing 323-8117-100

2" gear - 63.50mm housing 323-8120-100

2-1/4" gear - 69.85mm housing 323-8122-100

2-1/2" gear - 76.20mm housing 323-8125-100

1" gear - 38.10mm housing (motor only) 323-8210-100

1-1/4" gear - 44.45mm housing (motor only) 323-8212-100

1-1/2" gear - 50.80mm housing (motor only) 323-8215-100

1-3/4" gear - 57.15mm housing (motor only) 323-8217-100

2" gear - 63.50mm housing (motor only) 323-8220-100

2-1/4" gear - 69.85mm housing (motor only) 323-8222-100

2-1/2" gear - 76.20mm housing (motor only) 323-8225-100

Port end coversitem description part number

17 Port end cover - no ports 323-3000-100

Port end cover - pump side ports 323-3010-100

Port end cover - motor side ports 323-3020-100

Piggyback housing 350-315 CW 323-3050-100

Add-A-Pump port end cover SAE 'A' CW 323-3054-099

Add-A-Pump port end cover SAE 'B' CW 323-3054-100

Piggyback housing 350-315 CCW 323-3060-100

Add-A-Pump port end cover SAE 'A' CCW 323-3064-099

Add-A-Pump port end cover SAE 'B' CCW 323-3064-100

If porting is required please specify port type and size If porting is required please specify port type and size

Bearing carriersitem description part number

14 Bearing carrier single and combined 323-7100-100

Bearing carrier - motor only 323-7200-100

Bearing carrier dual outlet 323-7300-100

If porting is required please specify port type and size

Page 34

Page 39: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

item description

1 Snap Ring

2 Outboard Bearing

3 Shaft Seal (integral pump)

Shaft Seal (c-shaft pump)

Shaft Seal (integral motor)

Shaft Seal (c-shaft motor)

4 Shaft End Cover

5 Check Valve Assembly (motor)

Check Plug (pumps only)

6 Bushings

7 Back Up Seals

8 Channel seals

365 Series

Continental shaft only

item description

9 Thrust Plates (pump)

Thrust Plates (motor)

10 Integral Gear Set

11 Gasket Seals (pump)

Gasket Seals (motor)

12 Dowel Pins (pump)

Dowel Pins (motor)

13 Gear Housing (pump)

Gear Housing (motor)

14 Bearing Carrier

15 Connecting Shaft

16 Gear Set

17 Port End Cover

18 Cap Screws (single units)

Studs (multiple units)

19 Washers

20 Nuts

21 Continental Shaft

22 Spacer

23 Retaining Ring

24 Seal Retainer (motors and c-shafts)

Page 35

Page 40: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

365 Series Pumps & Motors

item description part number quantity

1 Retaining ring 391-2686-025 1

2 Outboard bearing 391-0381-078 1

3 Shaft seal (pump) 391-2883-052 1

Shaft seal (motor) 391-2883-094 1

4 Shaft end cover 322-50XX-XXX specify mounting type

1

5 Check valve assembly (motor) 391-3681-001 2

6 Bushings (per gear section) 391-0482-307 4

7 Back up seals (pump) per gear section 391-2883-177 2

8 Channel seals (pump) per gear section 391-2883-176 2

9 Back up seals (motor) per gear section 391-2885-071 2

10 End channel seals (motor) per gear section 391-2885-070 4

Side channel seals (motor) per gear section 391-2885-069 4

11 Thrust plates (pump) per gear section 391-2185-055 2

Thrust plates (motor) per gear section 391-2185-060 2

12 Integral gear set 322-29XX-XXX specify gear width and shaft type

1

13 Gasket seals (pump) per gear section 391-2884-052 2

Gasket seals (motor) per gear section 391-2884-023 2

14 Dowel pins (pump) per gear section 391-2082-062 8

Dowel pins (motor) per gear section 391-2082-069 4

15 Gear housing (pump) 322-81XX-100 specify housing width

1

Gear housing (motor) 322-82XX-100 specify housing width

1

16 Bearing carrier 322-7XXX-XXX specify porting required

1

17 Connecting shaft 322-1133-001 1

18 Gear set 322-28XX-000 specify gear width

1

19 Port end cover 322-30XX-XXX specify porting required

1

20 Cap screws (single units) 391-1401-XXX specify length, in inches

4

Studs (multiple units) 391-1425-XXX specify length, in inches

4

21 Washers (pump) 391-3782-028 4

Washers (motor) 391-3782-114 4

22 Nuts (pump) 391-1451-076 4

Nuts (motor) 391-1451-086 4

23 Continental shaft 322-XXXX-XXX specify shaft type

1

24 Spacer 391-3782-158 1

25 Retaining ring 391-2685-029 1

26 Seal retainer (motors and c-shafts) 391-2584-119 1

Page 36

Page 41: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Continental shaftitem description part number

21 SAE 'C' 14 tooth 1.25" dia 322-1000-501

SAE 'C' keyed 1.25" dia 322-1500-500

Connecting shaftitem description part number

 15 Connecting shaft 365-330 (for piggyback housing) 322-1133-002

Connecting shaft A spline (suits Add-A-Pump port end covers) 322-1133-003

Connecting shaft B spline (suits Add-A-Pump port end covers) 322-1133-004

Connecting shaft BB spline (suits Add-A-Pump port end covers) 322-1133-009

Integral gear setsitem description part number

10 3/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2907-250

3/4" gear set - SAE 'C' keyed 1.25" dia 322-2907-750

1" gear set - SAE 'C' 14 tooth 1.25" dia 322-2910-250

1" gear set - SAE 'C' keyed 1.25" dia 322-2910-750

1-1/4" gear set - 21 tooth 1-3/8" dia 322-2912-204

1-1/4" gear Set - SAE 'C' 14 tooth 1.25" dia 322-2912-250

1-1/4" gear set - SAE 'C' keyed 1.25" dia 322-2912-750

1-1/2" gear set - 21 tooth 1-3/8" dia 322-2915-204

1-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2915-250

1-1/2" gear set - SAE 'C' keyed 1.25" dia 322-2915-750

1-3/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2917-250

1-3/4" gear set - SAE 'C' keyed 1.25" dia 322-2917-750

2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2920-250

2" gear set - SAE 'C' keyed 1.25" dia 322-2920-750

2-1/4" gear set - SAE 'C' 14 tooth 1.25" dia 322-2922-250

2-1/4" gear set - SAE 'C' keyed 1.25" dia 322-2922-750

2-1/2" gear set - SAE 'C' 14 tooth 1.25" dia 322-2925-250

2-1/2" gear set - SAE 'C' keyed 1.25" dia 322-2925-750

Gear setsitem description part number

16 3/4" gear set 322-2807-000

1" gear set 322-2810-000

1-1/4" gear set 322-2812-000

1-1/2" gear set 322-2815-000

1-3/4" gear set 322-2817-000

2" gear set 322-2820-000

2-1/4" gear set 322-2822-000

2-1/2" gear set 322-2825-000

365 Series Pumps & Motors

Page 37

Page 42: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Shaft end coversitem description part number

4 SAE 'B' 2 bolt - pump only 322-5023-201

SAE 'C' 2 bolt - pump only 322-5023-202

SAE 'B' 2 bolt - motor only 322-5023-301

SAE 'C' 2 bolt - motor only 322-5023-302

SAE 'B' 4 bolt - pump only 322-5033-201

SAE 'C' 4 bolt - pump only 322-5033-202

SAE 'B' 4 bolt - motor only 322-5033-301

SAE 'C' 4 bolt - motor only 322-5033-302

Gear housingitem description part number

 13 3/4" gear - 31.75mm housing 322-8107-100

1" gear - 38.10mm housing 322-8110-100

1-1/4" gear - 44.45mm housing 322-8112-100

1-1/2" gear - 50.80mm housing 322-8115-100

1-3/4" gear - 57.15mm housing 322-8117-100

2" gear - 63.50mm housing 322-8120-100

2-1/4" gear - 69.85mm housing 322-8122-100

2-1/2" gear - 76.20mm housing 322-8125-100

1-1/4" gear - 44.45mm housing (motor only) 322-8212-100

1-1/2" gear - 50.80mm housing (motor only) 322-8215-100

1-3/4" gear - 57.15mm housing (motor only) 322-8217-100

2" gear - 63.50mm housing (motor only) 322-8220-100

2-1/4" gear - 69.85mm housing (motor only) 322-8222-100

2-1/2" gear - 76.20mm housing (motor only) 322-8225-100

Port end coversitem description part number

17 Port end cover no ports (motor only) 322-3000-099

Port end cover no ports 322-3000-100

Port end cover - pump side ports 322-3010-100

Port end cover - motor side ports 322-3020-100

Piggyback housing 365-350 CW 322-3050-100

Add-A-Pump port end cover SAE 'A' CW 322-3054-099

Add-A-Pump port end cover SAE 'B' CW 322-3054-100

Piggyback housing 365-350 CCW 322-3060-100

Add-A-Pump port end cover SAE 'A' CCW 322-3064-099

Add-A-Pump port end cover SAE 'B' CCW 322-3064-100

If porting is required please specify port type and size

Bearing carriers14 Bearing carrier single outlet - large pad 322-7100-099

Bearing carrier single and combined 322-7100-100

Bearing carrier half cross cored 322-7100-101

Bearing carrier - motor only 322-7200-100

Bearing carrier dual outlet 322-7300-100

Bearing carrier dual outlet - large pad 322-7300-101If porting is required please specify port type and size

365 Series Pumps & Motors

Page 38

Page 43: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Standard Seal Kits, Soft Seals only for Commercial Pumps & Motors

series single # tandem # triple #

P20 P20SK1 P20SK2 P20SK3

P30/31 P30SK1 P30SK2 P30SK3

P50/51 P50SK1 P50SK2 P50SK3

P75/76 P75SK1 P75SK2 P75SK3

M20 M20SK1 M20SK2 M20SK3

M30/31 M30SK1 M30SK2 M30SK3

M50/51 M50SK1 M50SK2 M50SK3

M75/76 M75SK1 M75SK2 M75SK3

P315 P315SK1 P315SK2 P315SK3

P330 P330SK1 P330SK2 P330SK3

P350 P350SK1 P350SK2 P350SK3

P365 P365SK1 P365SK2 P365SK3

M315 M315SK1 M315SK2 M315SK3

M330 M330SK1 M330SK2 M330SK3

M350 M350SK1 M350SK2 M350SK3

M365 M365SK1 M365SK2 N/A

Page 39

Page 44: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Heavy Duty Aluminium Pumps & Motors500 Series

High PerformanceHigh EfficiencyHigh Pressure Operation

PGP 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures.They are produced in three frame sizes, with displacements ranging from 0.8 to 70 cc/rev. A wide variety of standard options are available to meet specific application requirements.

Up to 275 bar continuous operation

High strength materials and large journal diameters provide low bearing loads for high pressure operation.

Low noise

PGP 505 and 517, 13 tooth gear profile, PGP 511, 12 tooth gear profile and optimised flow metering provide reduced pressure pulsation and exceptionally quiet operation.

Application flexibility

International mounts and connection, integrated valve capabilities and common inlet multiple pump configurations provide unmatched design and application versatility.

Characteristics

Mounting SAE, rectangular, thru-bolt

Shaft SAE splined, keyed, tapered, parallel standard, tang drive (on request)

Speed 500-4000 rpm

Axial / Radial Load Units subject to axial, radial load must be specified with an outboard bearing

Fluids Mineral oils, fire resistant fluids - water-oil emulsion 60/40, HFB - water-glycol, HFD - phosphate-esters, HFD

Temperature Fluid range of operating temperature 15-80°C

Fluid Viscosity Range of operating viscosity 8 to 100mm2/s max

Filtration According to ISO 4406 CI. 16/13

Multiple Pumps Available in two, three and four sections Max shaft load must conform to limitation shown in catalogue Max load is calculated by adding the torque values for each pumping sections that will be simultaneously loaded.

Page 40

Page 45: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

SAE ‘A’ 2 bolt mount5/8” keyed shaft

disp dimension inlet outlet part number stock part number stock

cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type

4 42.6 86.7 7/8” 3/4” 3500 250 3349116034 P 3349116034A W

6 44.1 89.8 1-1/16” 7/8” 3500 250 3349116035 P 3349116035A W

8 45.7 93.0 1-1/16” 7/8” 3500 250 3349116036 P 3349116036A W

10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349116030 P 3349116030A W

11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349116031 P 3349116031A W

14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349116032 P 3349116032A W

16 52.0 105.6 1-5/16” 1-1/16” 3400 250 3349116033 P 3349116033A W

19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349116037 P 3349116037A W

23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349116038 P 3349116038A W

27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349116039 P 3349116039A W

Seal Kit 8611-023-00N

All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion

Page 41

Page 46: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

SAE ‘A’ 2 bolt mount3/4” keyed shaft

disp dimension inlet outlet part number stock part number stock

cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type

4 42.6 86.7 7/8” 3/4” 3500 250 3349116042 P 3349116042A W

6 44.1 89.8 1-1/16” 7/8” 3500 250 3349116043 P 3349116043A W

8 45.7 93.0 1-1/16” 7/8” 3500 250 3349116044 P 3349116044A W

10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349116045 P 3349116045A W

11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349116046 P 3349116046A W

14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349116047 P 3349116047A W

16 52.0 105.6 1-5/16” 1-1/16” 3400 250 3349116048 P 3349116048A W

19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349116049 P 3349116049A W

23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349116050 P 3349116050A W

27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349116051 P 3349116051A W

Seal Kit 8611-023-Q1N

All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion

Page 42

Page 47: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

SAE ‘A’ 2 bolt mount5/8” 9 tooth spline

disp dimension inlet outlet part number stock part number stock

cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type

4 42.6 86.7 7/8” 3/4” 3500 250 3349111578 P 3349111578A W

6 44.1 89.8 1-1/16” 7/8” 3500 250 3319111579 P 3349111579A W

8 45.7 93 1-1/16” 7/8” 3500 250 3349111580 P 3349111580A W

10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349111581 P 3349111581A W

11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349111582 P 3349111582A W

14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349111583 P 3349111583A W

16 52 105.6 1-5/16” 1-1/16” 3400 250 3349111584 P 3349111584A W

19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349111585 P 3349111585A W

23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349111586 P 3349111586A W

27 60.7 122.9 1-5/8” 1-5/16” 2300 180 3349111587 P 3349111587A W

31 63.8 129.2 1-5/8” 1-5/16” 2100 160 3349111588 P 3349111588A W

33 65.4 132.3 1-5/8” 1-5/16” 2000 150 3349111589 P 3349111589A W

Seal Kit 8611-023-00N

All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion

Page 43

Page 48: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

SAE ‘A’ 2 bolt mount3/4” 11 tooth spline

disp dimension inlet outlet part number stock part number stock

cc/rev A C “G” UNF “G” UNF max RPM max bar clockwise type CCW type

4 42.6 86.7 7/8” 3/4” 3500 250 3349111602 P 3349111602A W

6 44.1 89.8 1-1/16” 7/8” 3500 250 3319111603 P 3349111603A W

8 45.7 93 1-1/16” 7/8” 3500 250 3349111604 P 3349111604A W

10 47.3 96.1 1-5/16” 1-1/16” 3500 250 3349111605 P 3349111605A W

11 48.1 97.7 1-5/16” 1-1/16” 3500 250 3349111606 P 3349111606A W

14 50.4 102.4 1-5/16” 1-1/16” 3500 250 3349111607 P 3349111607A W

16 52 105.6 1-5/16” 1-1/16” 3400 250 3349111608 P 3349111608A W

19 54.4 110.3 1-5/8” 1-5/16” 3250 250 3349111609 P 3349111609A W

23 57.5 116.6 1-5/8” 1-5/16” 2750 210 3349111610 P 3349111610A W

27 60.7 122.9 1-5/8” 1-5/16” 2300 190 3349111611 P 3349111611A W

31 63.8 129.2 1-5/8” 1-5/16” 2100 165 3349111612 P 3349111612A W

33 65.4 132.3 1-5/8” 1-5/16” 2000 155 3349111613 P 3349111613A W

Seal Kit 8611-023-Q1N

All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion

Page 44

Page 49: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

DIN group 2, 4 bolt mount1:8 taper shaft

disp dimension inlet outlet part number stock part number stock

cc/rev A C “G” BSP “G” BSP max RPM max bar clockwise type CCW type

4 42.6 86.7 3/4” 1/2” 3500 250 3349111711 P 3349111711A W

6 44.1 89.8 3/4” 1/2” 3500 250 3319111712 P 3349111712A W

8 45.7 93 3/4” 1/2” 3500 250 3349111713 P 3349111713A W

10 47.3 96.1 3/4” 1/2” 3500 250 3349116005 P 3349116005A W

11 48.1 97.7 3/4” 1/2” 3500 250 3349111714 P 3349111714A W

14 50.4 102.4 3/4” 1/2” 2800 250 3349111715 P 3349111715A W

16 52 105.6 3/4” 1/2” 2400 250 3349111716 P 3349111716A W

19 54.4 110.3 3/4” 1/2” 2000 250 3349116006 P 3349116006A W

23 57.5 116.6 3/4” 1/2” 1700 225 3349111718 P 3349111718A W

27 60.7 122.9 1” 3/4” 2350 190 3349111719 P 3349111719A W

31 63.8 129.2 1” 3/4” 2000 165 3349111720 P 3349111720A W

33 65.4 132.3 1” 3/4” 1900 155 3349111721 P 3349111721A W

Seal Kit 8611-023-00N

All clockwise units are stocked standard, for counter clockwise units please allow 1-2 days for conversion

Page 45

Page 50: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

PGP511 Series Aluminium Gear Pumps

Tandem bolt on unitsdisp dimension mm inlet port outlet port pressure part number stock

cc/rev “L” mm port code port code max bar type

4 47 7/8" UNF 3/4" UNF 210 3911832142 P

6 50.1 1-1/16" UNF 7/8" UNF 210 3911832143 P

8 53.3 1-1/16" UNF 7/8" UNF 210 3911832144 P

10 56.5 1-5/16" UNF 1-1/16" UNF 210 3911832145 P

11 58 1-5/16" UNF 1-1/16" UNF 210 3911832146 P

14 62.8 1-5/16" UNF 1-1/16" UNF 210 3911832147 P

16 65.9 1-5/16" UNF 1-1/16" UNF 210 3911832148 P

19 70.6 1-5/8" UNF 1-5/16" UNF 210 3911832149 P

23 76.9 1-5/8" UNF 1-5/16” UNF 210 3911832150 P

27 83.2 1-5/8" UNF 1-5/16" UNF 210 3911832151 P

31 89.5 1-5/8" UNF 1-5/16” UNF 210 3911832152 P

33 92.6 1-5/8" UNF 1-5/16” UNF 210 3911832153 P

Units are run clockwise and are easily converted in the field. .

Accessories

Stud material, nuts and washers will be required to complete your assemblies.

description UOM part number stock

M10 Nut ea 3911475167 P

Washer ea 3913782231 P

M10 Stud x 1 meter, grade 8 ea 8112015 P

Page 46

Page 51: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

505 Series

PG 505 B 1 B 1

Code Type

P Pump

Unit

Code Pump Motor

A Single Standard motor w/o checks

B Multiple standard motor two checks

C - standard motor one a/c check

Displacement

Code cc/rev

0030 3.0

0040 4.0

0060 6.0

0080 8.0

0100 10.0

0120 12.0

Shaft Type

Code Shaft

A1 9T, 16/32DP, 32L. SAE “A” spline

J1 Dia. 12.7, 3.2 key, 38L parallel

K1 Dia. 15.88, 4.0 key, no thread, 32L SAE “A”, parallel

Q2 Dia. 14.25, 3.0 key, M10 x 1 thread, 1.8 taper

Shaft Seal

Code Shaft Seal

X No Seal

N NBR

M Double NBR

Port Options

Code Description

E3E2 3/4-14 BSP thread1/2-14 BSP threadfor 3cc to 12cc

J7J5 20mm-40 dia - M615mm-35 dia - M6for 3cc to 12cc

Rotation

Code Rotation

C Clockwise

A Counter-clockwise

B Bi directional

Flange

Code Flange

D2 56 x 73 x dia 30 pilot rectangular

H1 82.5-050.8 SAE “AA” 2 bolt flange

H2 106.4-082.55 SAE “A” 2 bolt flange

How to specify

Page 47

Page 52: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

511 Series

PG 511 B 1 B 1

Code Type

P Pump

M Motor

Unit

Code Pump Motor

A Single unit Standard motor w/o checks

B Multiple unit

standard motor two checks

C - standard motor one a/c check

Displacement

Code cc/rev

0040 4.0

0060 6.0

0080 8.0

0100 10.0

0110 11.0

0140 14.0

0160 16.0

0190 19.0

0230 23.0

0270 27.0

0310 31.0

0330 33.0

Shaft Type

Code Shaft

A1 9T, 16/32DP, 32L. SAE “A” spline

C1 11T, 16/32DP, 38.2L, SAE 19-4 spline

F1 9T, B17 x 14, 23L DIN 5482 Spline

K1 015.88, 4.0 key, no thread, 32L SAE “A”, parallel

L6 019.05, 4.8 key, no thread, 32L SAE 19-1 parallel

S1 017.0, 7.7L, 3.0 key, M12 x 1.5. 1:5 taper

S2 0.16.65, 12.0L, 3.2 key, M12 x 1.5, 1:8 taper

S4 016.65, 12.0L, 4.0 key, M12 x 15, 1.8 taper

B1 10T, 17.0mm spline

Shaft Seal

Code Shaft Seal

X No seal

N NBR

M Double NBR

Port Options

Code Description

E5E3 3/4 - 14 BSP thread1/2 - 14 BSP threadonly from 4cc to 11cc

E6E5 1 - 11 BSP thread3/4 - 14 BSP thread only from 14cc to 23cc

D4D3 7/8 - 14 UNF thread3/4 - 16 UNF thread for 4cc only

D5D4 1-1/16 - 12 UNF thread7/8 - 14 UNF thread for 6cc to 8cc only

D6D5 1-5/16 - 12 UNF thread1-1/16 - 12 UNF thread for 10cc to 16cc only

D7D6 1-5/8 - 12 UNF thread1-5/16 - 12 UNF threadfor 23cc to 33cc

Code Port Options (motor)

E3E3 1/2 - 14 BSP thread1/2 - 14 BSP threadonly from 4cc to 11cc

E5E5 3/4 - 14 BSP thread3/4 - 14 BSP threadonly from 14cc to 33cc

D4D4 7/8 - 14 UNF thread7/8 - 14 UNF threadonly from 4cc to 11cc

D6D6 1-5/16 - 12 UNF thread1-5/16 - 12 UNF threadonly from 14cc to 33cc

Rotation

Code rotation

C Clockwise

A Counter-clockwise

B Bi direc-tional

Flange

Code Flange

D3 71.4 x 96.0-036.47 rectangular

D4 72.0 x 100.0-080 rectangular

H2 106.4-082.55 SAE “A” 2 bolt flange

H3 146.1-0101.06 SAE “B” 2 bolt flange

Q2 60.0 x 60.0-0.50 w/seal ‘o’ ring thru bolt flange top RHS

Q3 60.0 x 60.0-0.50 w/seal ‘o’ ring thru bolt flange top LHS

Made to order

Indent item

How to specify

Page 48

Page 53: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

517 Series

PG 517 B 1 B 1

Code Type

P Pump

Unit

Code Pump Motor

A Single unit Standard motor w/o checks

B Multiple unit

standard motor two checks

Displacement

Code cc/rev

0040 4.0

0060 6.0

0080 8.0

0100 10.0

0110 11.0

0140 14.0

0160 16.0

0190 19.0

0230 23.0

0270 27.0

0310 31.0

0330 33.0

Shaft Type

Code Shaft

D1 13T, 16/32DP, 42.2L. SAE “B” spline

M1 Dia 22.2, 6.3 key, 42.2L SAE “B” parallel

M2 Dia 25.4, 6.3 key, 46L SAE “BB” parallel

T1 Dia. 21.59, 11.2L, 4.0 key, M14 x 1.5, 1:8 taper

Shaft Seal

Code Shaft Seal

X No Seal

N NBR

M Double NBR

Port Options

Code Description

E6E5 1 - 11 BSP thread3/4 - 14 BSP thread only from 14cc to 19cc

E7E6 1-1/4 - 11 BSP thread1-11 BSP threadonly from 23cc to 38cc

E8E6 1-1/2 - 11 BSP thread1-11 BSP threadonly from 44cc to 70cc

Rotation

Code Rotation

C Clockwise

A Counter clockwise

B Bi directional

Flange

Code Flange

D7 98.4 x 128.2 x 50.77 pilot rectangular

H3 146.1-0101.06 SAE “B” 2 bolt flange

How to specify

Available in Truck Pump Section

Indent item

Page 49

Page 54: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

Pressure Dynamics, 18 Tarlton Crescent, Perth International Airport, WA 6105, Tel: (08) 9473 7277

CommercialHydraulics

Truck Pumps Cross Reference

The following table contains truck pumps that are either obsolete or no longer supported in Australia with a ‘new’ replacement part number. Check actual size and porting configuration.

current part make new part make description (PG517)

HP16-85A-2S7 Gresen 3339112378 Commercial PGP517A0280AD1H3NB1B1E6E5

HP16-85C-2S7 Gresen 3339111616 Commercial PGP517A0280CD1H3NB1B1E6E5

HP16-100A-2S7 Gresen 3339112379 Commercial PGP517A0330AD1H3NB1B1E6E5

HP16-100C-2S7 Gresen 3339111617 Commercial PGP517A0330CD1H3NB1B1E6E5

HP16-115A-2S7 Gresen 3339112380 Commercial PGP517A0380AD1H3NB1B1E6E5

HP16-115C-2S7 Gresen 3339111618 Commercial PGP517A0380CD1H3NB1B1E6E5

HP16-150A-2S7 Gresen 3339112381 Commercial PGP517A0440AD1H3NB1B1E6E5

HP16-150C-2S7 Gresen 3339111619 Commercial PGP517A0440CD1H3NB1B1E6E5

HP16-180A-2S7 Gresen 3339112418 Commercial PGP517A0520AD1H3NE8E6B1B1

HP16-180C-2S7 Gresen 3339111685 Commercial PGP517A0520CD1H3NE8E6B1B1

HP16-200A-2S7 Gresen 3339112396 Commercial PGP517A0700AD1H3NE8E6B1B1

HP16-200C-2S7 Gresen 3339111592 Commercial PGP517A0700CD1H3NE8E6B1B1

HP16-250A-2S7 Gresen 3339112396 Commercial PGP517A0700AD1H3NE8E6B1B1

HP16-250C-2S7 Gresen 3339111592 Commercial PGP517A0700CD1H3NE8E6B1B1

    CM10084    

current part make new part make description (PG517, 620, 640)

Bi- Rotational Bi-Rotational

5014006 (BR8) Bezares 3349113911 Commercial 8 CC 8T SPL DIN 5462

507206 (BR12) Bezares 3349113912 Commercial 12 CC 8T SPL DIN 5462

506306 (BR16) Bezares 3349113913 Commercial 16 CC 8T SPL DIN 5462

506406 (BR20) Bezares 3349113914 Commercial 19 CC 8T SPL DIN 5462

506506 (BR25) Bezares 7029113914 Commercial 29 CC 8T SPL DIN 5462

506606BZ (BR30) Bezares 7029113915 Commercial 36 CC 8T SPL DIN 5462

506706 (BR40) Bezares 7029113916 Commercial 41 CC 8T SPL DIN 5462

507606 (BR51) Bezares 7029113917 Commercial 46 CC 8T SPL DIN 5462

5010206 (BR61) Bezares 7049113912 Commercial 60 CC 8T SPL DIN 5462

5010306 (BR71) Bezares 7049113913 Commercial 70 CC 8T SPL DIN 5462

5010406 (BR81) Bezares 7049113914 Commercial 80 CC 8T SPL DIN 5462

5010506 (BR100) Bezares 7049113915 Commercial 100 CC 8T SPL DIN 5462

All above unit specifications, size and port orientation will vary from original part number.

To replace HP16 Gresen units, clover leaf adapter CM10084 is required with Commercial pump.

Page 50

Page 55: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

18 Tarlton Crescent, Perth International Airport WA 6105

Tel: (08) 9473 7277 Fax: (08) 9473 7298

Email: [email protected]

www.pressuredynamics.com.au

Pressure Dynamics is the largest privately owned Hydro-technical company in the west.

We are a vibrant and resourceful company leading the industry in hydraulic technology

applications. There is no quick fix at Pressure Dynamics, we are painstaking in all that we

do, from concept, through to design, manufacture and installation.

Our objective, quite simply, is to be the best in our field and achieve our goal without

shedding any standards in our service.

ENGINEERINGCONSULTANCY DESIGN MANUFACTURING TOTAL PACKAGE

Innovate design, superior project management, vast experience in remote site installation,

stringent quality control in all facets of production and design, customer and staff

training and a quality assurance certification to ISO 9001, enable Pressure Dynamics to

offer a total package of qualified and diverse skills from concept to manufacture and

installation.

SERVICEREPAIR MAINTENANCE INSTALLATION TESTING

Our Service Department provides services from overhauling componentry to on-site

troubleshooting, commissioning and installations. Our service division also offer

programmed care and maintenance packages to suit individual plants. Field testing is

supported by our fleet of fully equipped service vehicles that carry mobile test and fault

finding diagnostic equipment. As an added service, we also hire hydraulic power units

ready to operate at a minutes notice.

A phone call to Pressure Dynamics soon gets you back to full production.

SALESPRODUCT POWER UNITS CONNECTORS

Pressure Dynamics stocks an extensive range of hydraulic equipment and over the years

has become a major player in the hydraulic component market. We also represent the

world renowned Parker Hannifin products with their extensive range of hydraulics,

instrumentation fittings and valves, hoses and fittings. Our own range of small bore

hydraulic cylinders and our established range of commercial gear pumps and motors are

built to your own customised needs.

Page 56: Commercial Hyd Catalogue Artwork FINAL WEB VERSION CAT-CH-2009-01

PRESSURE DYNAMICS

18 Tarlton Crescent, Perth International Airport, Western Australia, 6105

Tel: (08) 9473 7277 Fax: (08) 9473 7298

Email: [email protected]

www.pressuredynamics.com.au

ABN: 12 072 551 967

CAT-CH-2009-01.1