Zhejiang East Zhouqiang Plastic & Mould Industry Co., Ltd
Zhejiang East Zhouqiang Plastic & Mould Industry Co., Ltd is a professional manufacturer for quality plastic molding machines and molds, etc. Products we can offer:1. PET blow molding machine (max. 24000BPH for 0.5L water bottle)2. PE extrusion blow molding machines (for max. 300L drum)3. High-speed preform molding machine (max. 24000pcs/hr, 10.5s/cycle)4. Shut-off nozzle preform mold (max. 96cav)
Brands that we have:
� DMK rotary stretch blow molder
� TINCOO extrusion blow molder
� DMK linear stretch blow molder
� DMS shut-off nozzle preformmold
DMK Rotary PET stretch blow molder
Main features:Output: 10,000 to 30,000 bottles/hrBottle size: 0.25L~2LSuitable for: non-carbonated and carbonated water, soft-drinks, juice, tea, isotonic beverages, milk and dairy products, oil andsauces, etc
Some photos
Advantages:
1. Power saving: heater is fixed with link of short section (43.8mm), which assures to heat more
preforms with the same heating length.
2. Water cooling plate: cooling bottle neck to avoid neck deformation during heating process
3. Infrared lamps:
3.1 Each lamps is adjustable
3.2 Lamp gripper is adjustable as angle changes
3.3 Lamp rod is adjustable in length, which is good for bottom heating
4. Adopting Siemens electric controlling system, with high precision and fast speed
5. Mold fixing assuresfast mold fixing speed and fast mold changing speed
6. Automatic plastic preform loader and automatic recovery device
TINCOO extrusion blow molder
� DHS-single station machine� DHD-double stations machine
� DHB-accumulator type machine
� Articles with capacities from 10ml to 300L
� Ability to transform various plastic materials, PP/PE, PVC, TPR, TPE, etc
� Powerful hydraulic clamping system
� Die head can be adjusted up and down for mold changing
� Conveyors available for DHS-DHD series
Optional devices
Products from DHS,DHD series
Products from DHB series
DMK linear stretch blow molder
1. DMK-L series, using bi-orientation blow molding principle. This range shares the same components as the DMK-R series, but stands out with linear structure.2. This series is stripped of complex parts and it occupies smaller room. 3. The oven, transfer and blowing units are all with independent driver, offering flexibility to adjust blowing time.4. Max. 8cavities, for max. 5L bottles
Some photos
Advantages
1. Special heating array structure to minimize oven space and energy consumption2. Cooling ramps throughout for max. preform neck protection3. Heating system suitable for wide range of preform types4. Significant saving due to competitive price5. DMK-L is a fast, reliable machine using high technology shared with DMK-R 6. Flexibility and choice owing to it’s wide scope of bottle dimension and it’s quick
change system7. Simple to install, use and maintain
DMS shut-off nozzle preform mold
General Introduction:
� Preform mold from 8cav to max. 96cav� For wide-mouth jars and narrow neck preforms� Employ advanced two-step dual taper locating
technology, each cavity self-lock independently to ensure lower decent ratio
� Core & cavity are made of special mold material after pre-heating in Sweden
� Lip cavity is made of imported nitrated steel, with good hardness and longer service life
� The excellent hot runner design assures uniform heating and greatly improves the product quality
� No cutting of the gate required to low the labor cost
� Standard inter-changeable mold components� Our mold can serve for at least 2million shots
Some photos of preform mold
Components brand & parts we offer
1. Mold material:1.1 Core & cavity: 2316# (Germany)
1.2 Mold base: 50# from China
1.3 Hot runner heating element: HOTSET (Germany)—same as that for Husky
1.4 Temp. controller: intelligent PID temp. controller1.5 Mani-fold: P20
Mold material can be customized to accommodate Husky, Krupp, Sipa machines, etc.
2. Preform mold parts we can offer:2.1 core: it is made of stainless material and treated by the titanium processing seepage
method2.2 Core base: it is fixed with pre-molding ejection device actuated by air
2.3 Die lip: it is cooled by water, and made of stainless steel
2.4 Cavity: it is polished precisely, and with surface chrome treated2.5 Preform molding parts: made of stainless steel and polished precisely
Cap/closure mould
Processing machines & mold advantage
Cap mold advantage:1. The mold is designed with 3D
drawing, and the productivity is high
2. The mold is made of superior steel from Japan and imported P20 & 2316#,etc
3. Each cavity is independent & self-locking to guarantee the concentricity
4. Temp. for each cavity is heated and cooled separately to reduce the cycle time
5. All cavities are inter-changeable for easy replacement
6. Mold for cap with various design
Top Related