7/23/2019 Yamaha XVZ`1300A Manual
1/91
7/23/2019 Yamaha XVZ`1300A Manual
2/91
Welcome to the Yamaha world of motorcycling!
As the owner of a XVZ1300A, you are benefiting from Ya
and newest technology for the design and the manufactu
which have earned Yamaha a reputation for dependability
Please take the time to read this manual thoroughly
XVZ1300As advantages. The owners manual does not
operate, inspect and maintain your motorcycle, but also in
and others from trouble and injury.
In addition, the many tips given in this manual will help
the best possible condition. If you have any further questi
tact your Yamaha dealer.
Th Y h t i h f d l t
EAU00001
7/23/2019 Yamaha XVZ`1300A Manual
3/91
IMPORTANT MANUAL INFORMATION
Particularly important information is distinguished in this manual by the following notations:
The Safety Alert Symbol means ATTENTION! BECOME ALERT
INVOLVED!
WARNING Failure to follow WARNING instructions could result in severe
motorcycle operator, a bystander or a person inspecting or repairing
CAUTION: A CAUTION indicates special precautions that must be taken to
motorcycle.
NOTE: A NOTE provides key information to make procedures easier or clea
NOTE:@
q This manual should be considered a permanent part of this motorc
ith it if th t l i b tl ld
7/23/2019 Yamaha XVZ`1300A Manual
4/91
IMPORTANT MANU
WARNING@
PLEASE READ THIS MANUAL CAREFULLY AND COMPLETELY
THIS MOTORCYCLE.@
7/23/2019 Yamaha XVZ`1300A Manual
5/91
IMPORTANT MANUAL INFORMATION
EAU00008
XVZ1300A
OWNERS MANUAL
1999 b Y h M C L d
7/23/2019 Yamaha XVZ`1300A Manual
6/91
TAB
1 GIVE SAFETY THE RIGHT O
2 DESCRIPTION
3 INSTRUMENT AND CONTRO
4 PRE-OPERATION CHECKS
5 OPERATION AND IMPORTAN
6 PERIODIC MAINTENANCE A
7 MOTORCYCLE CARE AND ST
8 SPECIFICATIONS
7/23/2019 Yamaha XVZ`1300A Manual
7/91
7/23/2019 Yamaha XVZ`1300A Manual
8/91
GIVE SAFETY T
GIVE SAFETY THE RIGHT OF WAY.........
7/23/2019 Yamaha XVZ`1300A Manual
9/91
1
1 -GIVE SAFETY THE RIGHT OF WAY
Motorcycles are fascinating vehicles, which can give you an unsu
freedom. However, they also impose certain limits, which you must acdoes not ignore the laws of physics.
Regular care and maintenance are essential for preserving your mo
condition. Moreover, what is true for the motorcycle is also true fo
depends on being in good shape. Riding under the influence of med
course, out of the question. Motorcycle riders - more than car drivers
and physical best. Under the influence of even small amounts of alcodangerous risks.
Protective clothing is as essential for the motorcycle rider as sea
passengers. Always wear a complete motorcycle suit (whether ma
synthetic materials with protectors), sturdy boots, motorcycle glove
Optimum protective wear, however, should not encourage carelehelmets and suits, in particular, create an illusion of total safety analways be vulnerable. Riders who lack critical self-control run the risk
take chances. This is even more dangerous in wet weather. The
predictably and defensively - avoiding all dangers, including those ca
E j id !
7/23/2019 Yamaha XVZ`1300A Manual
10/91
Left view.....................................................Right view...................................................
Controls/Instruments..................................
7/23/2019 Yamaha XVZ`1300A Manual
11/91
2
2-DESCRIPTION
Left view
1 Shift d l ( 3 6) 6 S t l k
7/23/2019 Yamaha XVZ`1300A Manual
12/91
Right view
11 P f t t 18 H dli ht
7/23/2019 Yamaha XVZ`1300A Manual
13/91
DESCRIPTION
2
Controls/Instruments
1 Cl t h l ( 3 5) 4 Ri ht h dl b it h
7/23/2019 Yamaha XVZ`1300A Manual
14/91
INSTRUMENT AND CON
Main switch.................................................Indicator lights ............................................
Speedometer..............................................
Antitheft alarm (optional)............................
Handlebar switches....................................
Clutch lever ................................................
Shift pedal ..................................................
Front brake lever.........................................
Rear brake pedal........................................
Fuel tank cap..............................................
Fuel ............................................................
Fuel cock....................................................Starter (choke) knob...................................
Steering lock ..............................................
Rider seat...................................................
Helmet holders ...........................................
Adj ti f t f k l d
7/23/2019 Yamaha XVZ`1300A Manual
15/91
3
3-INSTRUMENT AND CONTROL FUNCTIONS
EAU00028
Main switchThe main switch controls the ignition
and lighting systems. Its operation isdescribed below.
EAU00036
ON
Electrical circuits are switched on. The
engine can be started. The key cannot
EAU00054*
(Parking)
The taillight and auxiliary light come onbut all other circuits are off. With the
key at OFF, push it into the main
switch, turn it counterclockwise to ,
and remove it. To cancel the parking,
turn the key clockwise.
Indic
1. Hig
This iheadlig
2. Fue
When
i
7/23/2019 Yamaha XVZ`1300A Manual
16/91
INSTRUMENT AND CON
EAU00057
4. Turn indicator light
This indicator flashes when the turnswitch is moved to the left or right.
EAU01209
5. Oil level indicator light
This indicator light will come on if the oil
level is low. To check that the indicatorlight is working properly:
q Turn the engine stop switch to
and the main switch to ON.
q Put the transmission in neutral or
apply the clutch lever.
q Push the start switch.If the indicator light does not come on
while pushing the start switch, have a
Yamaha dealer inspect the electrical
circuit.
NOTE
EAU01257
6. Engine overheat indicator light
This indicator light will come on if the
engine overheats. If the light comes on,
stop the engine immediately and allow
the engine to cool. To check that the in-
dicator light is working properly:
q Turn the engine stop switch to
d h i i h ON
7. Ov
torq T
w
d
q T
o
e
a
Y
a
7/23/2019 Yamaha XVZ`1300A Manual
17/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU01202
SpeedometerThis speedometer is equipped with an
odometer and a trip meter. Pushing the
TRIP button will change the display
from one to the other. When set to
ODO, it indicates the motorcycles to-
tal mileage. When set to TRIP, it indi-
h l il i
To reset the trip meter to 0, push the
TRIP button until it displays TRIP,
then push it once again and hold it
down for at least one second.
NOTE:@
This motorcycle does not have a ta-
chometer. However, it is equipped with
an engine speed limiter, which pre-
h i d f d
Antith
An antthis mo
dealer
1. TRIP button
2. Odometer/Trip meter
7/23/2019 Yamaha XVZ`1300A Manual
18/91
INSTRUMENT AND CON
EAU00118
Handlebar switchesEAU00119
1. Pass switch
Press the switch to operate the passinglight.
EAU00121
2. Dimmer switch
Turn the switch to for the high
b d f h l b
EAU00127
3. Turn signal switch
To signal a right-hand turn, push theswitch to . To signal a left-hand
turn, push the switch to . Once the
switch is released it will return to the
center position. To cancel the signal,
push the switch in after it has returned
to the center position.
EAU00129
4. Horn switch
Press the switch to sound the horn.
7/23/2019 Yamaha XVZ`1300A Manual
19/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU00138
1. Engine stop switch
The engine stop switch is a safety de-
vice for use in an emergency such as
when the motorcycle overturns or if
trouble occurs in the throttle system.
Turn the switch to to start the en-
gine. In case of emergency, turn the
switch to to stop the engine.
EAU00143
3. Start switch
The starter motor cranks the enginewhen pushing the start switch.
EC000005
CAUTION:@
See starting instructions prior to
starting the engine.@
ClutcThe cl
handleoff sys
lever h
handle
release
The le
l
1. Clutc
7/23/2019 Yamaha XVZ`1300A Manual
20/91
INSTRUMENT AND CON
EAU01215
Shift pedalThe shift pedal is located on the left
side of the engine and is used in com-bination with the clutch when shifting.
Use your toe or heel to shift up and
your toe to shift down.
EAU00158
Front brake leverThe front brake lever is located on the
right handlebar. Pull it toward the han-dlebar to apply the front brake.
ReaThe
side othe br
1. Shift pedal 1. Front brake lever
7/23/2019 Yamaha XVZ`1300A Manual
21/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU02917
Fuel tank capTo remove
Slide the lock cover open, insert the
key and turn it 1/4 turn clockwise. The
lock will be released and the cap can
be removed.
To install
M k h k h k
NOTE:@
This tank cap cannot be closed unless
the key is in the lock. The key cannot
be removed if the cap is not locked
properly.@
EW000023
WARNING@
Be sure the cap is properly installedand locked in place before riding the
motorcycle.@
FuelMake s
tank. F
the fille
tion.
W@
D
1. Filler
2. Fuel
7/23/2019 Yamaha XVZ`1300A Manual
22/91
INSTRUMENT AND CON
EAU00185
CAUTION:@
Always wipe off spilled fuel immedi-
ately with a dry and clean soft cloth.
Fuel may deteriorate painted surfac-
es or plastic parts.@
EAU00191
NOTE:@
If k ki i i dif
EAU02969
Fuel cockThe fuel cock supplies fuel from the
tank to the carburetors while filtering it
also.
The fuel cock has three positions,
which should be set as shown in the il-
lustrations.
OFF
ON
With
flows
cock engin
Recommended fuel:
Regular unleaded gasoline with a
research octane number of 91 or
higher.
Fuel tank capacity:
Total:18 L
Reserve:
3.5 L
1. Pointed end positioned over OFF
OFF: closed position
1. Poin
ON:
7/23/2019 Yamaha XVZ`1300A Manual
23/91
INSTRUMENT AND CONTROL FUNCTIONS
3
RES
This indicates reserve. If you run out of
fuel while riding, set the fuel cock to this
position. Fill the tank at the first oppor-tunity. Be sure to set the fuel cock back
to ON after refueling!
EAU03032
Starter (choke) knobStarting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the knob in directiona to turn on
the starter (choke).
Move the knob in directionb to turn off
the starter (choke).
SteerThe st
side of
To loc
1. Tu
th
2. O
1. Pointed end positioned over RES
RES: reserve position
1. Steer
7/23/2019 Yamaha XVZ`1300A Manual
24/91
INSTRUMENT AND CON
To unlock the steering
1. Open the steering lock cover.
2. Insert the key, turn it counterclock-
wise 1/8 turn, and let go of it. (It au-
tomatically moves to where it can
be removed.)
3. Remove the key and close the
steering lock cover.
On the right side of the headpipe, there
is also a place to lock the steering with
a padlock. Turn the handlebars to align
the holes in the two brackets and lockthe steering with a suitable padlock.
RideThe r
the rid
To op
seat
Then
To re
tion o
7/23/2019 Yamaha XVZ`1300A Manual
25/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU01636
Helmet holdersThere are two helmet holders under the
rider seat. To secure a helmet on the
right side holder, simply hook the buck-
le of the helmet strap over the holder
and close the seat securely.
To secure a helmet on the left side
holder, use the helmet holding cable lo-
cated beside the tool kit. Pass the ca-
ble through the buckle on the helmetstrap, then place both cable loops over
the holder and close the seat securely.
W@
Never
the sejects,
possib@
1. Helmet holder ( 2) 1. Helmet holding cable
7/23/2019 Yamaha XVZ`1300A Manual
26/91
INSTRUMENT AND CON
EAU01605
Adjusting front fork preloadEach fork leg is equipped with an air
valve to adjust the spring preload. The
spring preload is adjusted by changing
the air pressure in each fork leg. In-
creasing the air pressure increases the
spring preload, decreasing air pressure
decreases spring preload. Special
NOTE:@
In order to check or adjust the air pres-
sure, the motorcycle must be elevated
so the front wheel is not in contact with
the ground.@
EW000037
WARNING@
Each fork leg must be set to thesame pressure. Uneven setting can
cause poor handling and loss of sta-
bility.@
CAU@
Neve
1. Air valve
Min
set
Z
Ma
5
7/23/2019 Yamaha XVZ`1300A Manual
27/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU01694
Adjusting rear shock
absorber preload
This shock absorber is equipped with aspring preload adjusting nut. Use the
special wrench located in the owners
tool kit to adjust the spring preload.
1. Loosen the locknut.2. Tu
di
lo
crpr
sp
Sh
in
en
1. Special wrench 1. Locknut
2. Adjusting nut
A. Dista
7/23/2019 Yamaha XVZ`1300A Manual
28/91
INSTRUMENT AND CON
EC000015
CAUTION:@
Never attempt to turn an adjuster
beyond the maximum or minimum
setting.@
3. Tighten the locknut to the speci-
fied torque.
EAU00315
WARNING@
This shock absorber contains high-
ly pressurized nitrogen gas. Readand understand the following infor-
mation before handling the shock
absorber. The manufacturer cannot
be held responsible for property
damage or personal injury that may
q D
c
d
d
q T
Y@
Spring preload:
Minimum (soft):Distance A = 48.5 mm
Standard:
Distance A = 45.5 mm
Maximum (hard):
Distance A = 40.5 mm
Tightening torque:
Locknut:
7/23/2019 Yamaha XVZ`1300A Manual
29/91
INSTRUMENT AND CONTROL FUNCTIONS
3
EAU00330
Sidestand
This model is equipped with an ignitioncircuit cut-off system. The motorcycle
must not be ridden when the sidestand
is down. The sidestand is located on
the left side of the frame. (Refer to
page 5-1 for an explanation of this sys-
tem.)EW000044
WARNING@
This motorcycle must not be operat-
ed with the sidestand in the down
position. If the stand is not properly
retracted, it could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Yamaha has designed into this
motorcycle a lockout system to as-
EAU00331
Sidestand/clutch switch
operation checkCheck the operation of the sidestand
switch and clutch switch against the in-
formation below.CD-11E
CD-11E
W@
If impr
sult a @
TURN THE MAIN SWITCH TO ON
AND THE ENGINE STOP SWITCH TO .
TRANSMISSION IS IN GEAR AND
SIDESTAND IS UP.
PULL IN CLUTCH LEVER AND
PUSH THE START SWITCH.
ENGIN
SIDES
ENGIN
SIDES
CLUT
7/23/2019 Yamaha XVZ`1300A Manual
30/91
PRE-OP
Pre-operation check list..............................
7/23/2019 Yamaha XVZ`1300A Manual
31/91
4
4-PRE-OPERATION CHECKS
Owners are personally responsible for their vehicles condition. Your motorcycles vital fu
quickly and unexpectedly, even if it remains unused (for instance, if it is exposed to the elem
loss of tire pressure could have serious consequences. Therefore, it is very important that, in
spection, you check the following points before each ride.
PRE-OPERATION CHECK LIST
ITEM CHECKS
Front brake Check operation, fluid level and vehicle for fluid leakage. Fill with DOT 4 brake fluid if necessary.
Rear brake Check operation, fluid level and vehicle for fluid leakage. Fill with DOT 4 brake fluid if necessary.
Clutch Check operation, fluid level and vehicle for fluid leakage. Fill with DOT 4 brake fluid if necessary.
Throttle grip and housing Check for smooth operation. Lubricate if necessary.
Engine oil Check oil level. Fill with oil if necessary.
Coolant reservoir tank Check coolant level. Fill with coolant if necessary.
7/23/2019 Yamaha XVZ`1300A Manual
32/91
PRE-OP
NOTE:Pre-operation checks should be made each time the motorcycle is used. Such an inspe
plished in a very short time; and the added safety it assures is more than worth the time in
WARNING
If any item in the PRE-OPERATION CHECK is not working properly, have it inspected
the motorcycle.
Chassis fasteners Make sure that all nuts, bolts and screws are properly tightened. Tighten if necessary.
Fuel Check fuel level. Fill with fuel if necessary.
Lights, signals andswitches
Check for proper operation.
ITEM CHECKS
7/23/2019 Yamaha XVZ`1300A Manual
33/91
7/23/2019 Yamaha XVZ`1300A Manual
34/91
OPERATION AND IMPORTA
Starting the engine.....................................
Starting a warm engine..............................
Shifting .......................................................
Tips for reducing fuel consumption ............
Engine break-in ..........................................
Parking .......................................................
7/23/2019 Yamaha XVZ`1300A Manual
35/91
5
5-OPERATION AND IMPORTANT RIDING POINTS
EAU00373
WARNING@
q Before riding this motorcycle,
become thoroughly familiarwith all operating controls andtheir functions. Consult aYamaha dealer regarding anycontrol or function that you donot thoroughly understand.
q Never start your engine or let it
q Before starting out, always be
sure the sidestand is up. Failure
to retract the sidestand com-
pletely can result in a seriousaccident when you try to turn a
corner.@
Start
NOTE@
This m
starting
switch
The en
one of q Th
q Th
si
di
The m
when t@
W@
Before
steps,
7/23/2019 Yamaha XVZ`1300A Manual
36/91
OPERATION AND IMPORTA
1. Turn the fuel cock to ON.
2. Turn the main switch to ON and
the engine stop switch to .EC000037
CAUTION:@
If the fuel level indicator light comes
on, check the fuel level. If neces-
sary, add fuel.@
3. Shift transmission into neutral.
4. Turn on the starter (choke) and
completely close the throttle grip.
5. Start the engine by pushing the
starter switch.
NOTE:@
If the engine fails to start, release the
starter switch, wait a few seconds, then
try again. Each attempt should be as
CAU@
The o
gine come
push
start
el ind
on, im
7/23/2019 Yamaha XVZ`1300A Manual
37/91
OPERATION AND IMPORTANT RIDING POINTS
5
6. After starting the engine, move the
starter (choke) to the halfway posi-
tion.
NOTE:@
For maximum engine life, never accel-
erate hard with a cold engine!@
7. After the engine is warm, turn off
the starter (choke) completely.
NOTE:@
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.@
EAU01258
Starting a warm engine
The starter (choke) is not requiredwhen the engine is warm.
EC000046
CAUTION:@
See the Engine break-in section
prior to operating the motorcycle for
the first time.@
ShiftiThe tr
amoun
a given
climbin
pedal i
To shi
pedal
7/23/2019 Yamaha XVZ`1300A Manual
38/91
OPERATION AND IMPORTA
EC000048
CAUTION:@
q Do not coast for long periodswith the engine off, and do not
tow the motorcycle a long dis-
tance. Even with gears in neu-
tral, the transmission is only
properly lubricated when the
engine is running. Inadequate
lubrication may damage the
transmission.
q Always use the clutch when
changing gears. The engine,
transmission, and driveline arenot designed to withstand the
shock of forced shifting and can
be damaged by shifting without
using the clutch.@
EAU00424
Tips for reducing fuel
consumptionYour motorcycles fuel consumption
depends to a large extent on your
riding style. The following tips can help
reduce fuel consumption:
q Warm up the engine before riding.
q Turn off the starter (choke) as
soon as possible.
q Shift up swiftly and avoid high en-
gine speeds during acceleration.
q Do not double-clutch or rev the en-
gine while shifting down and avoidhigh engine speeds with no load
on the engine.
q Turn off the engine instead of let-
ting it idle for an extended length
of time, i.e. in traffic jams, at traffic
7/23/2019 Yamaha XVZ`1300A Manual
39/91
OPERATION AND IMPORTANT RIDING POINTS
5
EAU00436
Engine break-in
There is never a more important periodin the life of your motorcycle than the
period between zero and 1,000 km. For
this reason we ask that you carefully
read the following material. Because
the engine is brand new, you must not
put an excessive load on it for the first
1,000 km. The various parts in the en-
gine wear and polish themselves to the
correct operating clearances. During
this period, prolonged full throttle oper-
ation, or any condition which might re-sult in excessive heating of the engine,
must be avoided.
EAU00444
0 ~ 150 km
Avoid operation above 1/3 throttle.
Stop the engine and let it cool for 5 to
10 minutes after every hour of opera-
tion. Vary the speed of the motorcycle
from time to time. Do not operate it at
one set throttle position.
500 ~
Avoid
3/4 thr
CAUT@
After 1
to rep
and fin@
1,000
Avoid
Vary s
CAUT@
If any
during
Yamah@
7/23/2019 Yamaha XVZ`1300A Manual
40/91
OPERATION AND IMPORTA
EAU00457
ParkingWhen parking the motorcycle, stop the
engine and remove the ignition key.
Turn the fuel cock to OFF whenever
stopping the engine.EW000058
WARNING@
The exhaust system is hot. Park the
7/23/2019 Yamaha XVZ`1300A Manual
41/91
7/23/2019 Yamaha XVZ`1300A Manual
42/91
PERIODIC MAINTENANCE A
Tool kit...................................................................6-1
Periodic maintenance and lubrication...................6-3
Spark plugs...........................................................6-6
Engine oil..............................................................6-7
Final gear oil .......................................................6-10
Coolant ...............................................................6-10
Carburetor adjustment ........................................6-11
Idle speed adjustment ........................................6-11
Throttle cable free play inspection ......................6-12
Valve clearance adjustment ................................6-12
Tires....................................................................6-13
Wheels................................................................6-15Clutch lever free play adjustment........................6-16
Front brake lever free play adjustment................6-17
Rear brake pedal height adjustment...................6-17
Brake light switch adjus
Checking the front and
Inspecting the brake flu
Brake fluid replacemen
Brake and shift pedal lu
Brake and clutch lever l
Sidestand lubrication...
Front fork inspection....
Battery.........................
Fuse replacement .......
Headlight bulb replacem
Turn signal and taillightTroubleshooting...........
Troubleshooting chart..
7/23/2019 Yamaha XVZ`1300A Manual
43/91
6
6-PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00464
Periodic inspection, adjustment and lu-
brication will keep your motorcycle in
the safest and most efficient condition
possible. Safety is an obligation of the
motorcycle owner. The maintenance
and lubrication schedule chart should
be considered strictly as a guide to
general maintenance and lubrication
RONMENT. The most important points
of motorcycle inspection, adjustment,
and lubrication are explained in the fol-lowing pages.
EW000060
WARNING@
If you are not familiar with motor-
cycle service, this work should be
done by a Yamaha dealer.@
Tool The se
manua
owner
for com
ventive
pairs. T
tool kit
1. Tool
7/23/2019 Yamaha XVZ`1300A Manual
44/91
PERIODIC MAINTENANCE A
NOTE:@
If you do not have necessary tools re-
quired during a service operation, takeyour motorcycle to a Yamaha dealer for
service.@
EW000063
WARNING@
Modifications to this motorcycle notapproved by Yamaha may cause
loss of performance, and render it
unsafe for use. Consult a Yamaha
dealer before attempting any chang-
es.@
7/23/2019 Yamaha XVZ`1300A Manual
45/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
PERIODIC MAINTENANCE AND LUBRICATIONCP-01E
NO. ITEM CHECKS AND MAINTENANCE JOBSIN
(1,0
1 * Fuel line Check fuel hoses for cracks or damage.
Replace if necessary.
2 * Fuel filter Check condition. Replace if necessary.
3 Spark plugs Check condition. Clean, regap or replace if necessary.
4 * Valves Check valve clearance. Adjust if necessary.
5 Air filter Clean or replace if necessary.
6 * Clutch Check operation, fluid level and vehicle for fluid leakage.
(See NOTE on page 6-5.) Correct accordingly.
7 * Front brake
Check operation, fluid level and vehicle for fluid leakage.(See NOTE on page 6-5.)
Correct accordingly.
7/23/2019 Yamaha XVZ`1300A Manual
46/91
PERIODIC MAINTENANCE A
10 * Tires
Check tread depth and for damage. Replace if necessary. Check air pressure. Correct if necessary.
11 * Wheel bearings Check bearing for looseness or damage. Replace if necessary.
12 * Swingarm
Check swingarm pivoting point for play. Correct if necessary. Lubricate with molybdenum disulfide grease every 24,000 km or
24 months (whichever comes first).
13 * Steering bearings
Check bearing play and steering for roughness.
Correct accordingly. Lubricate with lithium soap base grease every 24,000 km
or 24 months (whichever comes first).
14 * Chassis fasteners Make sure that all nuts, bolts and screws are properly tightened. Tighten if necessary.
15 Sidestand Check operation. Lubricate and repair if necessary.
NO. ITEM CHECKS AND MAINTENANCE JOBS IN(1,
7/23/2019 Yamaha XVZ`1300A Manual
47/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
NOTE:@
q The air filter needs more frequent service if you are riding in unusually wet or dusty are
20 * Carburetors Check engine idling speed, synchronization and starter operation. Adjust if necessary.
21 Engine oil Check oil level and vehicle for oil leakage. Correct if necessary. Change. (Warm engine before draining.)
22 Engine oil filter cartridge Replace.
23 * Cooling system
Check coolant level and vehicle for coolant leakage. Correct if necessary. Change coolant every 24,000 km or 24 months (whichever comes
first).
24 Final gear oil Check oil level and vehicle for oil leakage. Change oil at initial 1,000 km and thereafter every 24,000 km
or 24 months (whichever comes first).
NO. ITEM CHECKS AND MAINTENANCE JOBS IN(1,0
* Since these items require special tools, data and technical skills, they should be serviced by a Yamaha dealer.
7/23/2019 Yamaha XVZ`1300A Manual
48/91
PERIODIC MAINTENANCE A
EAU01485
Spark plugsRemoval
1. Remove the spark plug cap.
2. Use the spark plug wrench in the
tool kit to remove the spark plug as
shown.
Inspection
The spark plug is an important engine
component and is easy to inspect. The
condition of the spark plug can indicate
the condition of the engine. Normally,
ent c
wrong
to diastead
Yama
ly rem
becau
any s
and
come
er de
replac
fied p
1. Spark plug cap 1. Spark plug wrench
Sp
X
7/23/2019 Yamaha XVZ`1300A Manual
49/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
Installation
1. Measure the electrode gap with a
wire thickness gauge and, if nec-
essary, adjust the gap to specifica-tion.
3. Install the spark plug and tighten it
to the specified torque.
NOTE:@
If a torque wrench is not available when
you are installing a spark plug, a good
estimate of the correct torque is 1/4 to
1/2 turn past finger tight. Have the
spark plug tightened to the specified
torque as soon as possible.@
Engin
Oil lev1. P
pl
tio
ra
a. Spark plug gap
Spark plug gap:
0.8 ~ 0.9 mm
Tightening torque:
Spark plug:
17.5 Nm (1.75 mkg)
1. Oil le
2. Maxi
3. Minim
7/23/2019 Yamaha XVZ`1300A Manual
50/91
PERIODIC MAINTENANCE A
2. Stop the engine and wait for a few
minutes. Check the oil level
through the level window locatedat the lower part of the right side
crankcase cover.
NOTE:@
Wait a few minutes until the oil level
settles before checking.@
3. The oil level should be between
the maximum and minimum
marks. If the level is low, fill the en-
gine with sufficient recommended
oil to reach the specified level.
Engine oil and oil filter cartridge re-
placement
1. Warm up the engine for several
minutes.2. Stop the engine. Place an oil pan
under the engine and remove the
oil filler cap.
3. Remove the drain bolt and drain
the oil.
5. R
it
6. A
t
1. Engine oil filler cap 1. Eng
Tig
7/23/2019 Yamaha XVZ`1300A Manual
51/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
7. Install the new oil filter and tighten
it to the specified torque with an oil
filter wrench.
NOTE:@
When installing the oil filter, tighten it to
the proper torque by using a torque
wrench.@
8. Fill the engine with sufficient rec-
ommended oil. Install the oil filler
cap and tighten it.
EC000066
CAUTION:@
q Do not put in any chemical addi-
tives. Engine oil also lubricates
the clutch and additives could
9. St
se
up
le
im
ca
After th
indicat
1. Oil filter
Recommended oil:
See page 8-1.
Oil quantity:
Total amount:
4.3 L
Periodic oil change:
3.5 L
With oil filter replacement:
3.7 L
7/23/2019 Yamaha XVZ`1300A Manual
52/91
PERIODIC MAINTENANCE A
EAU01220
Final gear oilCheck for oil leakage. If any leakage is
found, take the motorcycle to aYamaha dealer for repairs.
EAU01589
Coolant1. Remove the reservoir tank cover
by removing the screw.
2. Check the coolant level in the res-
ervoir tank when the engine is cold
as the coolant level will vary with
engine temperature. The coolant
level should be between the maxi-
4. I
r
5. Pt
s
1. Final gear oil filler bolt
2. Final gear oil drain bolt
1. Res
2. Max
3. Min
Re
7/23/2019 Yamaha XVZ`1300A Manual
53/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
NOTE:@
q If water is added, have a Yamaha
dealer check the antifreeze con-
tent of the coolant as soon as pos-sible.
q Have a Yamaha dealer change
the coolant every two years.
q The radiator fan operation is com-
pletely automatic. It is switched on
EAU00630
Carburetor adjustment
The carburetors are important parts ofthe engine and require very sophisti-
cated adjustment. Most adjustments
should be left to a Yamaha dealer who
has the professional knowledge and
experience to do so. However, the idle
speed may be adjusted by the owneras part of routine maintenance.
EC000095
CAUTION:@
The carburetors were set at the
Yamaha factory after many tests. If
they are changed, poor engine per-
formance and damage may result.@
Idle s
NOTE@
A diag
for this@
1. At
en
m2,
en
Th
ly
1. Reservoir tank cap
7/23/2019 Yamaha XVZ`1300A Manual
54/91
PERIODIC MAINTENANCE A
2. Set the idle to the specified engine
speed by adjusting the throttle
stop screw. Turn the screw in di-
rectiona
to increase enginespeed and in direction b to de-
crease engine speed.
EAU00635
Throttle cable free play
inspectionThere should be a free play of 4 ~
6 mm at the throttle grip. If the free play
is incorrect, ask a Yamaha dealer to
make this adjustment.
Valv
The cwith u
suppl
the v
regul
shoul
Yama1. Throttle stop screw
Standard idle speed:
950 ~ 1,050 r/min
a. Free play
7/23/2019 Yamaha XVZ`1300A Manual
55/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU01226
TiresTo ensure maximum performance,
long service and safe operation, note
the following:
Tire air pressure
Always check and adjust the tire pres-
sure before operating the motorcycle.
EW000082
WARNING@
Tire inflation pressure should bechecked and adjusted when the
temperature of the tire equals the
ambient air temperature. Tire infla-
tion pressure must be adjusted ac-
cording to total weight of cargo,
rider, passenger, and accessories
(fairing, saddlebags, etc. if approved
for this model), and vehicle speed.@
CE-40E
W@
Propeis imp
tics o
handli
safety
items
your
center
tribute
to side
sion f
conditNEVE
CYCL
of the
acces
etc. if
Maximum load* 203 kg
Cold tire pressure Front Rear
Up to 90 kg load*
250 kPa
(2.50 kg/cm2,
2.50 bar)
250 kPa
(2.50 kg/cm2,
2.50 bar)
90 kg load ~
Maximum load*
250 kPa
(2.50 kg/cm2,
2.50 bar)
280 kPa
(2.80 kg/cm2,
2.80 bar)
* Load is the total weight of cargo, rider, passenger,
7/23/2019 Yamaha XVZ`1300A Manual
56/91
PERIODIC MAINTENANCE A
Tire inspection
Always check the tires before operating
the motorcycle. If center tread depth
reaches the limit as shown, if the tire
has a nail or glass fragments in it, or if
the side wall is cracked, contact a
Yamaha dealer immediately and have
the tire replaced.
EW000079
WARNING@
Operating the motorcycle with ex-cessively worn tires decrease riding
stability and can lead to loss of con-
trol. Have excessively worn tires re-
placed by a Yamaha dealer
immediately. Brakes, tires, and relat-
ed wheel parts replacement should
be left to a Yamaha Service Techni-
cian.@
CE-11E
NOTE:@
These limits may be different by regula-
tion from country to country. If so, con-
form to the limits specified by the
regulations of your own country.
Tire i
This m
less t
1. Sidewall
a. Tread depth
Minimum tire tread
depth (front and rear)1.6 mm
1. Tire
2. Valv
3. Valv
7/23/2019 Yamaha XVZ`1300A Manual
57/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EW000132
WARNING@
After extensive tests, the tires men-tioned below have been approved
by Yamaha Motor Co., Ltd. for this
model. No guarantee for handling
characteristics can be given if tire
combinations other than what is ap-
proved are used on this motorcycle.
The front and rear tires should be of
the same manufacture and design.
Always use the tire valves and valve
cores listed below. Be sure to install
the valve caps securely, as theseare important to prevent air pres-
sure leakage.@
CE-41E
CE-42E
Whee
To enlong se
the foll
q Al
a
w
noco
at
w
cr
q Ti
an
ch
ha
in
dl
FRONT
Manufacturer Size Type
Dunlop 150/80-16 71H D404F
Type
Tire valve TR412
Valve core #9000A
REAR
Manufacturer Size Type
Dunlop 150/90B15M/C 74H D404
Type
Tire valve PVR59A
Valve core #9000
7/23/2019 Yamaha XVZ`1300A Manual
58/91
PERIODIC MAINTENANCE A
q After repairing or replacing the
rear tire, tighten the valve stem nut
and locknut to the specifiedtorque.
EAU00695
Clutch lever free play
adjustmentThis motorcycle has a hydraulic clutch.
There are no adjustments to perform
but the clutch system must be inspect-
ed periodically for proper fluid level and
leakage. If the control lever free play
becomes excessive and the motor-
cycle creeps or stalls when shifted into
gear, or if the clutch slips, causing ac-
celeration to lag behind engine speed,
there is probably air in the clutch sys-
tem and it must be bled out. Ask aYamaha dealer to do this service.
Tightening torque:
Valve stem nut:
1.6 Nm (0.16 mkg)
Valve stem locknut:
1.6 Nm (0.16 mkg)
7/23/2019 Yamaha XVZ`1300A Manual
59/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU00696
Front brake lever free play
adjustmentThe free play at the front brake lever
should be 2 ~ 5 mm.
1. Loosen the locknut.
2. Turn the adjusting bolt in
directiona to increase free play
EW000099
WARNING@
q Check the brake lever free play.Be sure the brake is working
properly.
q A soft or spongy feeling in the
brake lever can indicate the
presence of air in the brake sys-
tem. This air must be removed
by bleeding the brake system
before the motorcycle is operat-
ed. Air in the system will cause
greatly diminished braking ca-
pability and can result in loss ofcontrol and an accident. Have a
Yamaha dealer inspect and
bleed the system if necessary.@
Rear
adjusThe to
positio
footres
adjust
1. Locknut
2. Adjusting bolt
c. Free play
a. Brake
7/23/2019 Yamaha XVZ`1300A Manual
60/91
PERIODIC MAINTENANCE A
EW000109
WARNING@
A soft or spongy feeling in the brakepedal can indicate the presence of
air in the brake system. This air
must be removed by bleeding the
brake system before the motorcycle
is operated. Air in the system will
cause greatly diminished braking
capability and can result in loss of
control and an accident. Have a
Yamaha dealer inspect and bleed
the system if necessary.@
EAU00713
Brake light switch adjustmentThe rear brake light switch is activated
by the brake pedal and is properly ad-justed when the brake light comes on
just before braking takes effect. To ad-
just the rear brake light switch, hold the
switch body so it does not rotate while
turning the adjusting nut.
1. Brake light switch
2. Adjusting nut
7/23/2019 Yamaha XVZ`1300A Manual
61/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU00721
Checking the front and rear
brake padsEAU01119
Front brakeWear indicator grooves are provided
on each brake pad. These indicators
allow checking of brake pad wear with-
out disassembling the brake. Inspect
the grooves. If they have almost disap-
EAU01198
Rear brake
A wear indicator groove is provided on
each brake pad. This indicator allows
checking of brake pad wear withoutdisassembling the brake. Inspect the
groove. If the groove has almost disap-
peared, ask a Yamaha dealer to re-
place the pads.
Inspe
levelInsuffic
the br
causin
Before
is abo
when n
1. Wear indicator groove ( 2)
Front
1. Wear indicator groove
Rear
1. Minim
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
62/91
PERIODIC MAINTENANCE A
Observe these precautions:
q When checking the fluid level,
make sure the top of the master
cylinder is level by turning the han-dlebars.
q Use only the designated quality
brake fluid. Otherwise, the rubber
seals may deteriorate, causing
leakage and poor brake or clutch
q Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor brake or clutch perfor-mance.
q Be careful that water does not en-
ter the master cylinder when refill-
ing. Water will significantly lower
the boiling point of the fluid and
q H
c
d
1. Minimum level mark 1. Minimum level mark
PERIODIC MAINTENANCE AND MINOR REPAIR
7/23/2019 Yamaha XVZ`1300A Manual
63/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU00742
Brake fluid replacement
The brake fluid should be replaced onlyby trained Yamaha service personnel.
Have the Yamaha dealer replace the
following components during periodic
maintenance or when they are dam-
aged or leaking:
q oil seals (every two years)q brake hoses (every four years)
EAU02984
Brake and shift pedal
lubricationLubricate the pivoting parts.
Recommended lubricant:
Engine oil
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
64/91
PERIODIC MAINTENANCE A
EAU02985
Brake and clutch lever
lubricationLubricate the pivoting parts.
SideLubric
and
Chec
and dRecommended lubricant:
Engine oilRe
PERIODIC MAINTENANCE AND MINOR REPAIR
7/23/2019 Yamaha XVZ`1300A Manual
65/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU02939
Front fork inspection
Visual checkEW000115
WARNING@
Securely support the motorcycle so
there is no danger of it falling over.@
Check for scratches or damage on the
inner tube and excessive oil leakage
from the front fork.Operation check
1. Place the motorcycle on a level
place.
2. Hold the motorcycle in an upright
position and apply the front brake.
3. Push down hard on the handle-
bars several times and check if the
fork rebounds smoothly.EC000098
BatteThis m
sealed
necess
the bat
q If
ch
er
q
1. Batte
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
66/91
PERIODIC MAINTENANCE A
EC000101
CAUTION:@
Never try to remove the sealing capsof the battery cells. The battery will
be damaged.@
EW000116
WARNING@
Battery electrolyte is poisonous anddangerous, causing severe burns,
etc. It contains sulfuric acid. Avoid
contact with skin, eyes or clothing.
ANTIDOTE:
q EXTERNAL: Flush with water.
q INTERNAL: Drink large quanti-
ties of water or milk. Follow with
milk of magnesia, beaten egg,
or vegetable oil. Call a physi-
cian immediately.
q
EYES: Flush with water for15 minutes and get prompt
medical attention.
Batteries produce explosive gases.
Keep sparks, flame, cigarettes etc.,
away. Ventilate when charging or
Batte
When
montfully c
place
CAU@
q C
t
d
p
q U
f
Uc
a
t
y
q A
PERIODIC MAINTENANCE AND MINOR REPAIR
7/23/2019 Yamaha XVZ`1300A Manual
67/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU01702
Fuse replacementSub fuse box
The sub fuse box is located behind the
upper left side panel. To remove the
panel, remove the screw and pull the
panel outward.
Main f
The m
the low
To rem
1. R
(S
2. R
re
1. Screw 1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
4. Fan fuse
5. Odometer fuse
6. Spare fuse ( 3)
Specified fuses:
Ignition fuse: 10 A
Signaling system fuse: 20 A
Headlight fuse: 20 A
Fan fuse: 10 A
1. Bolt (
2. Screw
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
68/91
PERIODIC MAINTENANCE A
If any fuse is blown, turn off the main
switch and the switch of the circuit in
question. Install a new fuse of specifiedamperage. Turn on the switches and
see if the electrical device operates. If
the fuse immediately blows again, con-
sult a Yamaha dealer.
EC000103
CAUTION:@
Do not use fuses of higher amper-
age rating than those recommend-
ed. Substitution of a fuse of
improper rating can cause extensive
electrical system damage and pos-
sibly a fire.@
1. Main fuse
2. Spare fuse
PERIODIC MAINTENANCE AND MINOR REPAIR
7/23/2019 Yamaha XVZ`1300A Manual
69/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU00833
Headlight bulb replacementThis motorcycle is equipped with a
quartz bulb headlight.
If the headlight bulb burns out, replacethe bulb as follows:
1. Remove the headlight unit screws.
2. Remove the connectors, the head-
light unit and then the bulb cover.
3. Turn the bulb holder counterclock-
wise to remove it and remove the
defective bulb.EW000119
WARNING@
Keep flammable products and your
hands away from a bulb while it is
CAUT@
Avoid
bulb.
wise, t
life of
will be
on a b
cloth m
1. Screw ( 2) 1. Connector ( 3)
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
70/91
PERIODIC MAINTENANCE A
EAU00855
Turn signal and taillight bulb
replacement1. Remove the screws and the lens.
2. Push the bulb inward and turn it
counterclockwise.
3. Place a new bulb in the socket.
Push the bulb inward and turn it
clockwise until it engages into the
Trou
Althoa rigid
the fa
opera
Any p
or ig
startinshoot
proce
If you
bring
techn
have
how
cycle
on yo
look l
1. Screw ( 2) 1. Screw ( 3)
PERIODIC MAINTENANCE AND MINOR REPAIR
7/23/2019 Yamaha XVZ`1300A Manual
71/91
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU02990*
Troubleshooting chartEW000125
WARNING@
Never check the fuel system while smoking or in the vicinity of an open flame.@
Check if there is fuel
in the fuel tank.
1. FuelEnough fuel.
No fuel.
Go to compression check.
Supply fuel. Engine doesnt start, go to
Use the electric starter.
2. CompressionThere is compression.
No compression.
Go to ignition check.
Ask a Yamaha dealer toinspect.
Remove sparkplugs and
3. IgnitionWet.
Wipe clean with dry cloth and correctspark gap or replace spark plugs.
Opthe
PERIODIC MAINTENANCE A
7/23/2019 Yamaha XVZ`1300A Manual
72/91
PERIODIC MAINTENANCE A
5. Engine overheating
WARNING@Do not remove the radiator cap when the engine and radiator are hot. Scalding hot
out under pressure, which could cause serious injury. Open the radiator cap as fol
cooled. Remove the radiator cap stopper by removing the screw. Place a thick rag li
and slowly rotate the cap counterclockwise to the detent. This procedure allows an
When the hissing sound has stopped, press down on the cap while turning counter@
Wait until theengine has cooled.
Check the coolant level in thereservoir tank and/or radiator.
Level is OK.
Level is low, check thecooling system for leakage.
Noleakage.
Leakage.
Restart the engine. If Yamaha dealer to ins
7/23/2019 Yamaha XVZ`1300A Manual
73/91
MOTORCYCLE CA
7/23/2019 Yamaha XVZ`1300A Manual
74/91
MOTORCYCLE CA
Care ...........................................................
Storage.......................................................
MOTORCYCLE CARE AND STORAGE
7/23/2019 Yamaha XVZ`1300A Manual
75/91
7
7-MOTORCYCLE CARE AND STORAGE
CareThe exposure of its technology makes
a motorcycle charming but also vulner-
able. Although high-quality compo-
nents are used, they are not all rust-
resistant. While a rusty exhaust pipe
may remain unnoticed on a car, it does
look unattractive on a motorcycle. Fre-
quent and proper care, however, will
Before cleaning
1. Cover up the muffler outlets with
plastic bags.2. Make sure that all caps and covers
as well as all electrical couplers
and connectors, including the
spark plug caps, are tightly in-
stalled.
3. Remove extremely stubborn dirt,
like oil burnt onto the crankcase,
with a degreasing agent and a
brush, but never apply such prod-
ucts onto seals, gaskets and
wheel axles. Always rinse the dirtand degreaser off with water.
Clean
After n
Removdeterg
then ri
Use a
reach
will co
covere
utes be
MOTORCYCLE CA
7/23/2019 Yamaha XVZ`1300A Manual
76/91
MOTORCYCLE CA
ECA00010
CAUTION:@
q Avoid using strong acidic wheelcleaners, especially on spoked
wheels. If you do use such
products for hard-to-remove
dirt, do not leave it on any long-
er than instructed, then thor-
oughly rinse it off with water,
immediately dry the area and
apply a corrosion protection
spray.
q Improper cleaning can damage
windshields, cowlings, panelsand other plastic parts. Use
only a soft, clean cloth or
sponge with mild detergent and
water to clean plastic.
q Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths orsponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust re-
movers or inhibitors, brake flu-
id, antifreeze or electrolyte.
q Do not use high-pressure wash-
ers or steam-jet cleaners since
they cause water seepage and
deterioration in the following ar-
eas: seals (of wheel bearings,swingarm bearings, forks and
brakes), electric components
(couplers, connectors, instru-
ments, switches and lights),
breather hoses and vents.
q F
a
ct
s
c
l
s
s
s
l
s
t
a@
After
on sa
Since
roads
MOTORCYCLE CARE AND STORAGE
7/23/2019 Yamaha XVZ`1300A Manual
77/91
MOTORCYCLE CARE AND STORAGE
7
1. Clean your motorcycle with cold
water and soap after the engine
has cooled down.ECA00012
CAUTION:@
Do not use warm water since it in-
creases the corrosive action of the
salt.@
2. Be sure to apply a corrosion pro-
tection spray on all (even chrome-
and nickel-plated) metal surfaces
to prevent corrosion.
After cleaning
1. Dry the motorcycle with a chamois
or an absorbing cloth.2. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally in-
duced discoloring of stainless-
steel exhaust systems can be re-
moved through polishing.)
3. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray on all (even chrome-
and nickel-plated) metal surfaces.4. Use spray oil as a universal clean-
er to remove any remaining dirt.
5. Touch up minor paint damage
caused by stones, etc.
6. Wax all painted surfaces.
W@
Make on the
sary, c
ings
cleane
tires w
Then, for its
nering@
MOTORCYCLE CA
7/23/2019 Yamaha XVZ`1300A Manual
78/91
MOTORCYCLE CA
ECA00013
CAUTION:@
q Apply spray oil and wax spar-ingly and wipe off any excess.
q Never apply oil or wax on rub-
ber and plastic parts, but treat
them with a suitable care prod-
uct.
q Avoid using abrasive polishing
compounds as they wear away
the paint.@
NOTE:@
Consult a Yamaha dealer for advice on
what products to use.@
StorageShort-term
Always store your motorcycle in a cool,
dry place and, if necessary, protect it
against dust with a porous cover.ECA00014
CAUTION:@
q Storing the motorcycle in a
poorly ventilated room or cover-
Long
Befor
sever1. F
2. D
b
t
b
i
3. O
w
t4. F
s
t
f
5. P
MOTORCYCLE CARE AND STORAGE
7/23/2019 Yamaha XVZ`1300A Manual
79/91
MOTORCYCLE CARE AND STORAGE
7
a. Remove the spark plug caps and
spark plugs.
b. Pour a teaspoonful of engine oilinto each spark plug bore.
c. Install the spark plug caps onto the
spark plugs and place the spark
plugs on the cylinder head so that
the electrodes are grounded. (This
will limit sparking during the next
step.)
d. Turn the engine over several times
with the starter. (This will coat the
cylinder walls with oil.)
e. Remove the spark plug caps fromthe spark plugs, install the spark
plugs and then the spark plug
caps.EWA00003
WARNING@
6. Lubricate all control cables and
the pivoting points of all levers and
pedals as well as of the sidestand/centerstand.
7. Check and, if necessary, correct
the tire air pressure, then raise the
motorcycle so that both of its
wheels are off the ground. Alterna-
tively, turn the wheels a little every
month in order to prevent the tires
from becoming degraded in one
spot.
8. Cover up the muffler outlets with
plastic bags to prevent moisturefrom entering.
9. R
ch
plm
an
(le
30
B
P
M
NOTE@
Make
storing@
7/23/2019 Yamaha XVZ`1300A Manual
80/91
Specifications.............................................
How to use the conversion table ................
SPECIFICATIONS
7/23/2019 Yamaha XVZ`1300A Manual
81/91
8
8-SPECIFICATIONS
Specifications
Model XVZ1300A
Dimensions
Overall length 2,480 mm
Overall width 950 mm
Overall height 1,160 mm
Seat height 715 mm
Wheelbase 1,695 mm
Ground clearance 150 mm
Minimum turning radius 3,400 mm
Basic weight (with oil and fullfuel tank) 330 kg
Engine
Engine type Liquid cooled 4-stroke, DOHC
Cylinder arrangement V type 4-cylinder
Displacement 1,294 cm3
Bore stroke 79 66 mm
Compression ratio 10:1
Engine oil
Type
Recommended engine oil
classification
CAUTION:
Be sure to use motor
modifiers. Passenger
Energy Conserving)
will cause clutch and/o
reduced component life
7/23/2019 Yamaha XVZ`1300A Manual
82/91
Final gear oil
Type SAE80API GL-4 Hypoid Gear
Oil
Quantity 0.2 L
Radiator
capacity (including all routes) 2.9 L
Air filter Dry type element
FuelType Regular unleaded gasoline
Fuel tank capacity 18 L
Reserve amount 3.5 L
Carburetor
Type quantity BDS28 4
Manufacturer MIKUNI
Spark plug
Manufacturer/Type NGK / DPR7EA-9 or
DENSO / X22EPR-U9
Gap 0.8 ~ 0.9 mm
Transmission type
Operation
Gear ratio
1
2
3
4
5
Chassis
Frame type
Caster angle
Trail
TiresFront
Type
Size
Manufacturer /
model
SPECIFICATIONS
7/23/2019 Yamaha XVZ`1300A Manual
83/91
SPECIFICATIONS
8
Maximum load* 203 kg
Air pressure (cold tire)
Up to 90 kg load*
Front 250 kPa (2.50 kg/cm2, 2.50 bar)
Rear 250 kPa (2.50 kg/cm2, 2.50 bar)
90 kg load ~ maximum load*
Front 250 kPa (2.50 kg/cm2, 2.50 bar)
Rear 280 kPa (2.80 kg/cm2, 2.80 bar)
* Load is the total weight of cargo, rider, passenger and accesso-
ries.
Wheels
Front
Type Cast
Size 16 MT3.50
Rear
Type Cast
Size 15M/C MT4.00
Brakes
Rear
Type
Operation
Fluid
Suspension
Front
Type
Rear
Type
Shock absorber
Front
Rear
Wheel travelFront
Rear
Electrical sysyem
Ignition system
Charging system
7/23/2019 Yamaha XVZ`1300A Manual
84/91
Headlight type Quartz bulb (halogen)
Bulb voltage, wattage quantity
Headlight 12 V, 60/55 W 1
Auxiliary light 12 V, 4 W 1
Tail/brake light 12 V, 5/21 W 1
Turn signal lights 12 V, 21 W 4
Meter light 14 V, 1.4 W 2
Neutral indicator light 12 V, 1.7 W 1
High beam indicator light 12 V, 1.7 W 1
Oil level indicator light 12 V, 1.7 W 1
Turn indicator light 12 V, 1.7 W 1
Fuel level indicator light 14 V, 3 W 1
Engine overheat indicator light 12 V, 1.7 W
1Overdrive / Engine trouble
indicator light 12 V, 1.7 W 1
Fuses
Main fuse 30 A
Ignition fuse 10 A
SPECIFICATIONS
7/23/2019 Yamaha XVZ`1300A Manual
85/91
SPECIFICATIONS
8
EAU01064
HOW TO USE THE CONVERSION TABLECS-02E
All specification data in this manual are listed in SI and
METRIC UNITS.
Use this table to convert METRIC unit data to IMPERIAL
unit data.
Ex.
METRIC MULTIPLIER IMPERIAL
**mm 0.03937 = **in
2 mm 0.03937 = 0.08 in
CONVERMETRIC
Metric unit
Torque
mkgmkgcmkgcmkg
Weightkgg
Speed km/hr
Distance
kmmmcmmm
Volume /Capacity
cc (cm3)cc (cm3)lt (liter)lt (liter)
Misc.kg/mmkg/cm2
Centigrade (C)
CONSUM
7/23/2019 Yamaha XVZ`1300A Manual
86/91
CONSUM
Identification number records.....................
Key identification number ...........................
Vehicle identification number......................
Model label.................................................
CONSUMER INFORMATION
7/23/2019 Yamaha XVZ`1300A Manual
87/91
9-CONSUMER INFORMATION
EAU02944
Identification number records
Record the key identification number,vehicle identification number and mod-
el label information in the spaces pro-
vided for assistance when ordering
spare parts from a Yamaha dealer or
for reference in case the vehicle is sto-
len.1. KEY IDENTIFICATION NUMBER:
CA-02E
2. VEHICLE IDENTIFICATION
NUMBER:CA-02E
EAU01041
Key identification numberThe key identification number is
stamped on the key tag. Record this
number in the space provided and useit for reference when obtaining a new
key.
VehicThe v
stampe
Recordvided.
NOTE@
The v
used t
1. Key identification number 1. Vehic
CONSUM
7/23/2019 Yamaha XVZ`1300A Manual
88/91
CONSUM
EAU01050
Model labelThe model label is affixed to the frame
under the seat. (See page 3-10 for seat
removal procedures.) Record the infor-mation on this label in the space pro-
vided. This information will be needed
to order spare parts from your Yamaha
dealer.
1. Model label
7/23/2019 Yamaha XVZ`1300A Manual
89/91
http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/7/23/2019 Yamaha XVZ`1300A Manual
90/91
S
Shifting .................................................... 5-3
Shift pedal ...............................................3-6Sidestand ..............................................3-15
Sidestand/clutch switch operation
check .................................................. 3-15
Sidestand lubrication .............................6-22
Spark plugs ............................................. 6-6
Specifications ..........................................8-1
Speedometer...........................................3-3Starter (choke) knob ................................3-9
Starting a warm engine............................ 5-3
Starting the engine ..................................5-1
Start switch.............................................. 3-5
Steering lock............................................ 3-9
Storage....................................................7-4
TThrottle cable free play inspection ......... 6-12
Tips for reducing fuel consumption..........5-4
Tires...................................................... 6-13
Tool kit.....................................................6-1
Troubleshooting.....................................6-28
Troubleshooting chart............................6-29
Turn indicator light 3 2
V
Valve clearance adjustment .................. 6-12
Vehicle identification number................... 9-1
W
Wheels.................................................. 6-15
http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/http://e_4yp.pdf/7/23/2019 Yamaha XVZ`1300A Manual
91/91
Top Related