Summary
Think2Thing COVID-19 face shield design is based on the original PRUSARC2 headband.
https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2
The design breaks up the PRUSA RC2 into sub components to allow fornesting of sub components to maximize the build volume for SLSmachines (eg. EOS P395)
The sub components are assembled after printing to form the final product
Orignal Solidworks files, Magics, SLI, and assembly instructions can befound here:
https://www.dropbox.com/sh/g9fik5xau94kshb/AABDMkcXDLKx5x_n1VQdVc_0a?dl=0
Healthcare > Accessibility
faceshield covid19protection
One full set contains:
T Think2Thing
Nestable faceshield based onPrusa RC2
VIEW IN BROWSER
updated 3. 4. 2020 | published 3. 4. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
282.3 KBupdated 1. 4. 2020
282.0 KBupdated 1. 4. 2020
279.8 KBupdated 1. 4. 2020
1.1 MBupdated 1. 4. 2020
1 pc t2tcovidfaceshield-001_R[radius] 1 pct2tcovidfaceshield-002_R[radius] 1 pc t2tcovidfaceshield-003 1 pct2tcovidfaceshield-004 1 pc t2tcovidfaceshield-004_mirror 1 pcbottom_reinforcement
The [radius] for t2tcovidfaceshield-001 and t2tcovidfaceshield-002 isdetermined by your maximum print dimension. Use the radius-to-widthlook up table to find the STL that suits your printer.
This remix is based on
Prusa Face Shield
by Prusa Research
t2tcovidfaceshield-002_r160.stl
t2tcovidfaceshield-002_r190.stl
t2tcovidfaceshield-002_r180.stl
t2tcovidfaceshield-001_r110.stl
1.1 MBupdated 1. 4. 2020
1.1 MBupdated 1. 4. 2020
476.3 KBupdated 1. 4. 2020
383.1 KBupdated 1. 4. 2020
1.1 MBupdated 1. 4. 2020
1.1 MBupdated 1. 4. 2020
287.5 KBupdated 1. 4. 2020
1.1 MBupdated 1. 4. 2020
291.9 KBupdated 1. 4. 2020
t2tcovidfaceshield-001_r120.stl
t2tcovidfaceshield-001_r180.stl
t2tcovidfaceshield-001_flat.stl
bottom_reinforcement.stl
t2tcovidfaceshield-001_r140.stl
t2tcovidfaceshield-001_r160.stl
t2tcovidfaceshield-002_r140.stl
t2tcovidfaceshield-001_r190.stl
t2tcovidfaceshield-002_r120.stl
294.3 KBupdated 1. 4. 2020
6.5 MBupdated 1. 4. 2020
6.5 MBupdated 1. 4. 2020
11.7 MBupdated 1. 4. 2020
7.4 MBupdated 2. 4. 2020
7.4 MBupdated 2. 4. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
t2tcovidfaceshield-002_r110.stl
t2tcovidfaceshield-004.stl
t2tcovidfaceshield-004_mirror.stl
t2tcovidfaceshield-003.stl
t2tcovidfaceshield-004b.stl
t2tcovidfaceshield-004b_mirror.stl
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
Top Related