Xitanium
LED driver
Datasheet
Xitanium LED drivers – spot- and downlight SELVXitanium 50W LH 0.7-1.5A 48V I 230V
Enabling future-proof LED technologyXitanium LED drivers are designed to operate LED solutions for general lighting applications. Reliability is enhanced by features that protectthe connected LED module, e.g. hot wiring, reduced ripple current and thermal derating. Most drivers feature central DC operation. In thecoming years LEDs will continue to increase in efficiency, creating challenges for OEMs. With Xitanium LED drivers, flexibility in luminairedesign is assured thanks to an adjustable output current. Application-oriented operating windows offer stable lumen output and light qualitylevels that specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions fromdifferent manufacturers.
Benefits• High reliability underpinned by 5 year
warranty• Future-proof flexibility -
application-oriented operatingwindows enable LED generation andcomplexity management
• Compatibility - can also be used forother manufacturers' modules orOEMs' own PCB designs
Features• Operating windows - output current
can be adjusted via the PhilipsMultiOne configurator ('TD' drivers)or with a resistor outside the driver
• Hot wiring, reduced ripple currentand thermal derating for increasedreliability
• Multiple versions - DALI dimmable &programmable, trailing-edge dimmable,fixed-current/fixed-outputtrailing-edge dimmable, fixed-output,and fixed-current/fixed-output
• Power ratings: 10-110 W• Choice of housing designs - linear
housing for tracks in '3 in 1' in design,conventional HID housings for down-and spotlighting, and SH housing forindependent use with strain relief andloop through
Applications• Retail
May 2015
Electrical input data
Specification item Value Unit ConditionNominal input voltage 220...240 Vac
Nominal input frequency 50...60 HzNominal input current 0.27 A @230V @ full loadInput voltage 230 Vac full loadNominal input power 59 W @230V @ full loadPower factor ≥ 0.9Total harmonic distortion ≤ 20 %Efficiency 88 % @230V @ full loadNominal input voltage DC 186...250 Vdc
Nominal input current DC 0.32 A Input voltage 230 Vdc, full loadInput voltage AC 202...254 Vac Performance rangeInput frequency AC 47.5...63 Hz Maximum permissible range
Electrical output data
Specification item Value Unit ConditionRegulation method Constant CurrentOutput voltage 24...48 Vdc
Output voltage max. 60 V Peak voltage at open loadOutput current 0.7...1.5 A Full output current settingOutput current tolerance ± 5 %Output current ripple LF ≤ 4 % Ripple = peak / averageOutput power 17...50 W Full output
Electrical data controls input
Specification item Value Unit ConditionControl method Fixed
Logistical data
Specification item ValueProduct name Xitanium 50W LH 0.7-1.5A 48V I 230VOrder codeLogistic code 12NC 9290 009 34706EAN3Pieces per box 10
2 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015
Wiring & Connections
Specification item Value Unit ConditionInput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire
16...24 AWG WAGO250 (3.5 mm), solid wireInput wire strip length 8.5...9.5 mmOutput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire
16...24 AWG WAGO250 (3.5 mm), solid wireOutput wire strip length 8.5...9.5 mmMaximum cable length 600 mm Total length of wiring including LED module, one way
Dimensions and weight
Specification item Value Unit ConditionLength (A1) 190 mmWidth (B1) 46 mmHeight (C1) 32 mmFixing hole diameter (D1) 4.2 mmFixing hole distance (A2) 154 mmWeight 206 gram
3 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015
Operational temperatures and humidity
Specification item Value Unit ConditionAmbient temperature -20...+45 ºCTcase-max 90 ºC Maximum temperature measured at Tc-pointTcase-life 80 ºC Measured at Tc-pointMaximum housing temperature 110 ºC In case of a failureRelative humidity 10...90 % Non-condensing
Storage temperature and humidity
Specification item Value Unit ConditionAmbient temperature -25...+85 ºCRelative humidity 5...95 % Non-condensing
Lifetime
Specification item Value Unit ConditionDriver lifetime 50,000 hours Measured temperature at Tc-point is Tcase-life.
Maximum failures = 10%
Programmable features
Specification item Value Remark ConditionSet output current (AOC) LEDset and SimpleSet See Design-in guide.
Default output current: ≤ 0.7 ALED module temperature derating (MTP) NoConstant Lumen Over Lifetime (CLO) NoDC emergency dimming (DCemDIM) No Current output decreased to 15%Corridor mode NoEnergy metering NoDiagnostics No
Features
Specification item Value Remark ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection Yes Automatic recoveringHot wiring YesSuitable for fixtures with protection class I and II
Certificates and standards
Specification item ValueApproval marks CE / ENECIngress Protection classification 20
4 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015
Note: For better EMI performance, functional earth connection should be provided for built-in applications.
For built-in applications, an ambient temperature of -20...+55 ºC can be used.
Inrush current
Specification item Value Unit ConditionInrush current Ipeak 23.5 A Input voltage 230VInrush current Twidth 272 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 24 pcs
MCB Rating Relative number of LED driversB 10A 63%B 13A 81%B 16A 100% (stated in datasheet)B 20A 125%B 25A 156%C 10A 104%C 13A 135%C 16A 170%C 20A 208%C 25A 260%
Driver touch current
Specification item Value Unit ConditionTypical touch current 0.7 mA peak Acc. IEC61347-1. LED module contribution not
included
Surge immunity
Specification item Value Unit ConditionMains surge immunity (diff. mode) > 1 kVMains surge immunity (comm. mode) 2 kV
Additional information
Specification item Value Unit ConditionAOC 0 mACLO 0 %
5 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015
Graphs
Operating window
Power factor versus output power
Efficiency versus output power
6 / 7 Xitanium 50W LH 0.7-1.5A 48V I 230V May 2015
THD versus output power
©2015 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The informationpresented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed withoutnotice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights. Data subject to change.
Date of release: May 21, 2015
www.philips.com/xitanium
Top Related