1
WTO TBT Notifications Abstract
August 2010
TBT ABSTRACTS FOR THE 8/1/2010 To 8/31/2010 1 TBT Notification No G/TBT/N/BHR/200
Country Bahrain Product Labelling Packages of Tobacco Products (ICS: 65.160)
Title Labelling Packages of Tobacco Products (available in Arabic only, 8 pages).
Contents
This draft technical regulation is concerned with the labelling requirements for Tobacco such as name of product, brand, number of cigarettes, production date in month and year, percentage of tar, nicotine and carbon monoxide on cigarette packs and the percentage of nicotine on the other tobacco products, batch number, health warnings and pictures, country of origin or manufacture or packaging, etc.
Last Date For Comment
10/16/2010
2 TBT Notification No G/TBT/N/BRA/381
Country Brazil Product Sanitizing products.
Title Draft Resolution N° 45, 13 May 2010 - notification and registration procedures for sanitizing products (11 pages, in Portuguese).
Contents
This technical regulation establishes procedures and requirements for notification and registration of sanitizing products. This draft Resolution has the objective to update, streamline procedures and reduce bureaucracy, to establish definitions, general characteristics and technical requirements for packaging and labelling, for notification and registration of products classified as sanitizing, with the purpose of better health risks management. This draft Resolution applies to all products defined as sanitizing. The notification and registration procedures of sanitizing products were done taking into account risk assessment and risk management. The sanitizing products are classified according to their risk, objectives, sales and use.
The sanitizing products classified as risk 1shall be notified, and must attend to the provisions of Resolution RDC 42, 13 August 2009, in addition to the requirements of this Resolution. The sanitizing products classified as risk 2 shall be registered. Anvisa will grant a period of 360 days for all products previously notified and registered tobe adjusted to this Resolution, after its entry into force. This resolution will revoke Resolution RDC 184, 22 October 2001, Resolution RE 3168, 22 September 2006, and items 3.2 and 3.3 of the Annex of the Resolution RDC 38, 28 April 2000.
Last Date For Comment
07/14/2010
3 TBT Notification No G/TBT/N/BRA/382
Country Brazil
2
Product Biological products.
Title Draft Resolution N° 49, 25 May 2010 – registration of new biological products and biological products (13 pages, Portuguese).
Contents
This technical regulation establishes procedures and requirements for registration of new biological products and biological products. This draft Resolution has the objective to ensure quality, safety and efficacyof these medicines. This Resolution applies to new biological products and biological products to be submitted to Anvisa´s analysis to obtain a registration.
The following biological products are covered by this Resolution:
I - Vaccines;
II - Antibodies;
III – Hemoderivatives;
IV - Biomedicines classified as:
Medicines obtained from biological fluids or tissues of animalorigin; and
Medicines obtained by biotechnological procedures.
V - Monoclonal antibodies;
VI – Products containing live microorganisms, attenuated or dead;
VII – Probiotics;
VIII – Allergens.
Only biological products registered at Anvisa, manufactured or imported by establishments authorized by the federal government and licensed by the state government, can be commercialized and distributed in Brazil.
This resolution will revoke Resolution RDC 315, 26 October 2005.
Last Date For Comment
07/25/2010
4 TBT Notification No G/TBT/N/BRA/383
Country Brazil Product Medicines.
Title Draft Resolution N° 72, 14 July 2010 - brand names to identify medicines. (5 pages, in Portuguese).
Contents
This technical regulation establishes requirements for acceptability of medicines brand names and supplement differential names (additions to differ one medicine from another), and issues about the adequacy of brand names already registered at Anvisa. This draft Resolution regulates the formation of medicines brand names with the objective of identifying, mitigating and eliminating the high health risk associated with medication errors resulting from the adoption of similar names to different kind of medicines. The criteria set forth in this draft Resolution shall apply to all products that must submit to registration or notification at Anvisa. The requirements set forth here do not apply to generic medicines and immunotherapy, which shall use the common
3
name of the active principle of the medicine. The brand name, if applicable, must also attend the requirements set forth in the specific regulations that apply to specific categories in which the applicant intend to register the medicine. The definition of medicines brand name for the purpose of this draft Resolution is: name adopted to differentiate it from others of the same company or other companies, proposed by the holder of the registration of the pharmaceutical product under which it is identified, sold and advertised. Supplement differential name is defined as the complementary designation of a medicine brand name, with the function of differentiating it from other products already registered by the company and reduce the risk of medication errors. This draft Resolution revokes Resolution RDC No. 333, 19 November 2003.
Last Date For Comment
08/16/2010
5 TBT Notification No G/TBT/N/BRA/384
Country Brazil Product Helmets; Safety headgear (HS 6506). Title Nº 276, 12 July 2010 (46 pages, in Portuguese).
Contents Conformity assessment procedure for helmets (safety headgear) used by motorcycles (or similar vehicles) drivers and passengers by a compulsory third party certification carried out by an accredited body.
Last Date For Comment
08/15/2010
6 TBT Notification No G/TBT/N/CAN/320
Country Canada Product Motor vehicle Systems (ICS: 43.040)
Title
Notice of publication of Revision 1 of Technical Standards Documents No. 114, Theft Protection and Rollaway Prevention and No. 216, Roof Crush Resistance and Revision 2 of Technical Standards Document No. 301, Fuel System Integrity (2 pages, available in English and French).
Contents
Notice is hereby given, pursuant to section 12 of the Motor Vehicle Safety Act and sections 16 and 17 of the Motor Vehicle Safety Regulations, that the Department of Transport has revised the following Technical Standards Documents (TSD):
• 114, Theft Protection and Rollaway Prevention, which specifies vehicle performance requirements intended to reduce the incidence of crashes resulting from theft and accidental rollaway of motor vehicles;
• 216, Roof Crush Resistance, which establishes strength requirements for the passenger compartment roof; and
• 301, Fuel System Integrity, which specifies requirements for the integrity of motor vehicle fuel systems.
Last Date For Comment
----
7 TBT Notification No G/TBT/N/CHL/137
4
Country Chile Product Electrical products and fuel products
Title Modificación al Reglamento para la certificación de productos eléctricos y de combustibles (Amendment to the Certification Regulations for electrical products and fuel products).
Contents
The notified amendment to the Regulations seeks to establish the safety and quality certification procedures for electrical products and fuel products marketed in Chile for risk management purposes to ensure that such products do not pose a threat to humans and/or objects.
Last Date For Comment
09/28/2010
8 TBT Notification No G/TBT/N/CHL/138
Country Chile Product Electrical conductors: type RV
Title
Protocolo de análisis y/o ensayos de seguridad de producto eléctrico – Conductor eléctrico denominación RV (Safety analysis and/or test protocol for electrical products – Type RV electrical conductors) (9 pages, in Spanish).
Contents
The notified Protocol establishes the safety certification procedure for single-core or multi-core electrical conductors which are non-armoured and non-shielded, of annealed copper, bare or metal-coated, solid (class 1) or stranded (class 2), cross-linked polyethylene-insulated (XLPE), with a thermoplastic polyvinyl chloride (PVC)/ST2 sheath, a service temperature to 90°C and a rated voltage of 0.6/1kV, in accordance with the scope and coverage of International Electrotechnical Commission (IEC) Standard No. 60502-1:2009, code designation RV, and in conformity with European Committee for Electrotechnical Standardization (CENELEC) Harmonization Document (HD) No. 603-1:1998.
Last Date For Comment
10/11/2010
9 TBT Notification No G/TBT/N/CHL/139
Country Chile Product Electrical conductors: type RV K
Title
Protocolo de análisis y/o ensayos de seguridad de producto eléctrico - Conductor eléctrico denominación RV-K (Safety analysis and/or test protocol for electrical products - Type RV-K electrical conductors) (8 pages, in Spanish).
Contents
The notified Protocol establishes the safety certification procedure for single-core or multi-core electrical conductors which are non-armoured and non-shielded, of annealed copper, bare or metal-coated, flexible (class 5), cross-linked polyethylene-insulated (XLPE), with a thermoplastic polyvinyl chloride (PVC)/ST2 sheath, a service temperature to 90ºC and a rated voltage of 0.6/1kV, in accordance with the scope and coverage of International Electrotechnical Commission (IEC) Standard No. 60502-1:2009, code designation RV-K, and in conformity with
5
European Committee for Electrotechnical Standardization (CENELEC) Harmonization Document (HD) No. 603-1:1998.
Last Date For Comment
10/11/2010
10 TBT Notification No G/TBT/N/CHL/140
Country Chile Product Electrical conductors: type RZ1
Title
Protocolo de análisis y/o ensayos de seguridad de producto eléctrico - Conductor eléctrico denominación RZ1 (Safety analysis and/or test protocol for electrical products - Type RZ1 electrical conductors) (9 pages, in Spanish).
Contents
The notified Protocol establishes the safety certification procedure for single-core or multi-core electrical conductors which are non-armoured and non-shielded, non-flame and non-fire propagating, with low toxic gas emissions, low smoke density and low combustion gas acidity, made of annealed copper, bare or metal-coated, solid (class 1) or stranded (class 2), cross-linked polyethylene-insulated (XLPE), with a sheath of type ST8 thermoplastic material, halogen-free, with a service temperature to 90ºC and a rated voltage of 0.6/1kV, in accordance with the scope and coverage of International Electrotechnical Commission (IEC) Standard No. 60502-1:2009, code designation RZ1, and in conformity with European Committee for Electrotechnical Standardization (CENELEC) Harmonization Document (HD) No. 603-1:1998.
Last Date For Comment
10/11/2010
11 TBT Notification No G/TBT/N/CHL/141
Country Chile Product Electrical conductors: type RZ1-K
Title
Protocolo de análisis y/o ensayos de seguridad de producto eléctrico - Conductor eléctrico denominación RZ1-K (Safety analysis and/or test protocol for electrical products - Type RZ1-K electrical conductors) (9 pages, in Spanish).
The notified Protocol establishes the safety certification procedure for single-core or multi-core electrical conductors which are non-armoured and non-shielded, non-flame and non-fire propagating, with low toxic gas emissions, low smoke density and low combustion gas acidity, made of annealed copper, bare or metal-coated, flexible (class 5), cross-linked polyethylene-insulated (XLPE), with a sheath of type ST8 thermoplastic material, halogen-free, with a service temperature to 90ºC and a rated voltage of 0.6/1kV, in accordance with the scope and coverage of International Electrotechnical Commission (IEC) Standard No. 60502-1:2009, code designation RZ1-K, and in conformity with European Committee for Electrotechnical Standardization (CENELEC) Harmonization Document (HD) No. 603-1:1998.
Last Date For Comment
11/10/2010
6
12 TBT Notification No G/TBT/N/CHL/144 Country Chile Product Electrical conductors: type H07Z1 K
Title
Protocolo de análisis y/o ensayos de seguridad de producto eléctrico - Conductor eléctrico denominación H07Z1-K (Safety analysis and/or test protocol for electrical products - Type H07Z1-K electrical conductors) (8 pages, in Spanish).
Contents
The notified Protocol establishes the safety certification procedure for single-core electrical conductors which are unsheathed, non-fire propagating, halogen-free, having low emission of smoke and corrosive gases when affected by fire, of annealed copper, bare or metal-coated, flexible (class 5), with type TI 7 thermoplastic insulation, a service temperature to 70ºC and a rated voltage of 450/750V, in accordance with the scope and coverage of UNE Standard No. 211002:2008, code designation H07Z1-K, and in conformity with European Committee for Electrotechnical Standardization (CENELEC) Harmonization Document (HD) No. 21.15 S1:2006.
Last Date For Comment
11/10/2010
13 TBT Notification No G/TBT/N/CHN/742
Country China
Product Printers, fax machines and multi-function device (MFD) with primary function of printing or facsimile.
Title National Standard of the P.R.C., Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Printers and Fax Machines (16 pages, in Chinese).
Contents
Article 4.2 of this standard is mandatory and the rest ones are recommended. The mandatory contents are the minimum allowable values of energy efficiency for printers, fax machines, and MFD with primary function of printing or facsimile. This standard applies to the products in normal work under voltage 220V and frequency 50 Hz, with standard format and printing speed lower than 70 ipm. It does not cover the products whose electrical power only comes from batteries or interfaces (such as USB, IEEE1394 etc.), or with digital front end (DFE).
Last Date For Comment
10/4/2010
14 TBT Notification No G/TBT/N/CHN/743
Country China
Product Cable digital television adapters, terrestrial digital television adapters and satellite digital television adapters.
Title National Standard of the P.R.C., Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Digital Television Adapters (Set-Top Boxes) (12 pages, in Chinese).
Contents Article 4.2 of this standard is mandatory and the rest ones are recommended. The mandatory contents are the minimum allowable values of energy efficiency for general-purpose digital television
7
adapters (also known as set-top boxes, hereinafter referred to as adapters). This standard applies to the adapters in normal work under voltage 220V and frequency 50 Hz, including cable adapters, terrestrialadapters and satellite adapters.
Last Date For Comment
10/4/2010
15 TBT Notification No G/TBT/N/CHN/744
Country China Product Small-power motor
Title National Standard of the P.R.C., Minimum Allowable Values of Energy Efficiency and Values of Efficiency Grade for Small-Power Motors (8 pages, in Chinese).
Contents
Articles 4.3 and 4.4 of this standard are mandatory and the rest ones are recommended. The mandatory contents are the minimum allowable energy efficiency and target energy efficiency minimum allowable value of small-power motors. This standard applies to general purpose A.C. small-power motors with voltage up to 690V and frequency 50Hz, including three-phase asynchronous motor (10W- 2200W), permanent- split capacitor asynchronous motor (120W- 3700W), two-value capacitor asynchronous motor (250W- 3000W) andmotor for room air conditioner fan (6W- 550W).
Last Date For Comment
10/4/2010
16 TBT Notification No G/TBT/N/CHN/745
Country China Product Pharmaceutical products.
Title Good Manufacturing Practice for Pharmaceutical Products (Revised in 2010) (40 pages, in Chinese).
Contents To regulate and supervise the whole process of production and quality management of pharmaceutical products.
Last Date For Comment
09/30/2010
17 TBT Notification No G/TBT/N/COL/152
Country Colombia Product Additives used in the processing of food for human consumption.
Title
Proyecto de Resolución del Ministerio de la Protección Social "Por la cual se establece el reglamento técnico sobre los requisitos de rotuladoo etiquetado que deben cumplir los aditivos que se empleen para la elaboración de alimentos para consumo humano en el territorio nacional" (Draft Resolution of the Ministry of Social Welfare "Establishing the Technical Regulation on the marking and labelling requirements for additives used in the processing of food for human consumption in Colombian national territory") (8 pages, in Spanish).
Contents
The notified draft Resolution establishes the general marking and labelling requirements for additives used in the processing of food for human consumption and the specific mandatory and optional information to be displayed on labels. The Resolution includes
8
definitions and provisions relating to inspection, monitoring and control, penalties, notification, and validity.
Last Date For Comment
09/27/2010
18 TBT Notification No G/TBT/N/COL/153
Country Colombia
Product Medicines, biologics, bases for magistral preparations, cosmetics, pesticides, miscellaneous veterinary products and diagnostic kits and reagents.
Title
Proyecto de Resolución del Instituto Colombiano Agropecuario – ICA "Por medio de la cual se establecen los requisitos para el registro de productor, semielaborador, almacenador e importador de medicamentos, biológicos, drogas blancas, cosméticos, plaguicidas, productos varios veterinarios, kit y reactivos de diagnóstico, y se establecen otras disposiciones" (Draft Resolution of the Colombian Agricultural Institute "Laying down the requirements governing the registration of producers, semi-manufacturers, storage providers and importers of medicines, biologics, bases for magistral preparations, cosmetics, pesticides, miscellaneous veterinary products and diagnostic kits and reagents, and establishing other provisions") (42 pages, in Spanish).
Contents
The notified draft Resolution establishes the requirements for the registration and control of natural and legal persons engaged in the production, contract production, semi-manufacturing, importation and storage of medicines, biologics, bases for magistral preparations, cosmetics, pesticides, miscellaneous veterinary products and diagnostic kits and reagents. The Resolution covers the following: Purpose; Scope; Definitions; Registration; Registration procedures; Technical visit; Issue of registration; Technical tests; Product registration; Procedures for and issue of product registration; Labelling; Amendment or cancellation of registration; Research and experimentation; Obligations; Prohibitions; Certification of good practices; Official control; Documentation; Penalties; and Period of validity.
Last Date For Comment
11/09/2010
19 TBT Notification No G/TBT/N/CZE/140
Country Czech Republic Product High-speed weigh-in-motion scales for road vehicles.
Title
Draft – Measure of a General Nature, stipulating metrological and technological requirements for specified measuring devices, including test methods for type approval and verification of specified measuring devices: "high-speed weigh-in-motion scales for road vehicles" (20 pages, in Czech).
Contents
This measure of a general nature stipulates metrological and technological requirements for specified measuring devices, including test methods for verifying specified measuring devices, which in this case are high speed weigh-in-motion scales for road vehicles.
Last Date For 10/08/2010
9
Comment
20 TBT Notification No G/TBT/N/CZE/141 Country Czech Republic
Product Regular (Class 5), precise (Class 4) and fine (Class 2 and 3) commercial and special mass standards.
Title
Draft – Measure of a General Nature, stipulating metrological and technological requirements for specified measuring devices, including test methods for type approval and verification of specified measuring devices: "regular (Class 5), precise (Class 4) and fine (Class 2 and 3) commercial and special mass standards" (16 pages, in Czech).
Contents
This measure of a general nature stipulates metrological and technological requirements for specified measuring devices, including test methods for verifying specified measuring devices, which in this case are regular (Class 5), precise (Class 4) and fine (Class 2 and 3) commercial and special mass standards.
Last Date For Comment
10/08/2010
21 TBT Notification No G/TBT/N/EEC/342
Country European Communities
Product Variant Creutzfeldt-Jakob disease (vCJD) assays for blood screening, diagnosis and confirmation.
Title Draft Commission Directive amending Directive 98/79/EC of the European Parliament and of the Council on in vitro diagnostic medical devices (3 pages, in English).
Contents
This draft Commission Directive provides that Variant Creutzfeldt-Jakob disease (vCJD) assays for blood screening, diagnosis and confirmation are submitted to a conformity assessment procedure that involves Notified Bodies.
Last Date For Comment
10/4/2010
22 TBT Notification No G/TBT/N/EEC/343
Country European Communities Product Variant Creutzfeldt-Jakob Disease (vCJD) assays for blood screening.
Title Draft Commission Decision amending Decision 2002/364/EC on common technical specifications for in vitro diagnostic medical devices (5 pages, in English).
Contents This draft Commission Decision sets up requirements for Variant Creutzfeldt-Jakob Disease (vCJD) assays for blood screening.
Last Date For Comment
10/4/2010
23 TBT Notification No G/TBT/N/EEC/344
Country European Communities Product Biocidal products.
Title Draft Commission Directive amending Directive 98/8/EC of the European Parliament and of the Council to include fenoxycarb as an
10
active substance in Annex I thereto (6 pages, in English).
Contents This draft Commission Directive includes fenoxycarb in the European Union positive list of active substances, which may be used in biocidal products.
Last Date For Comment
11/09/2010
24 TBT Notification No G/TBT/N/EEC/345
Country European Communities Product Biocidal products.
Title Draft Commission Directive amending Directive 98/8/EC of the European Parliament and of the Council to include bifenthrin as an active substance in Annex I thereto (7 pages, in English).
Contents This draft Commission Directive includes bifenthrin in the European Union positive list of active substances, which may be used in biocidal products.
Last Date For Comment
11/09/2010
25 TBT Notification No G/TBT/N/EEC/346
Country European Communities Product Biocidal products.
Title Draft Commission Directive amending Directive 98/8/EC of the European Parliament and of the Council to include nonanoic acid as an active substance in Annex I thereto (5 pages, in English).
Contents This draft Commission Directive includes nonanoic acid in the European Union positive list of active substances, which may be used in biocidal products.
Last Date For Comment
11/08/2010
26 TBT Notification No G/TBT/N/EEC/347
Country European Communities Product Biocidal products.
Title
Draft Commission Directive amending Directive 98/8/EC of the European Parliament and of the Council to include (Z,E)-Tetradeca-9,12-dienyl acetate as an active substance in Annexes I and IA thereto (7 pages, in English).
Contents This draft Commission Directive includes (Z,E)-Tetradeca-9,12-dienyl acetate in the European Union positive list of active substances, which may be used in biocidal products.
Last Date For Comment
10/10/2010
27 TBT Notification No G/TBT/N/EEC/348
Country European Communities Product Chemicals.
Title Regulation (EC) No 1272/2008 (notified under reference G/TBT/N/EEC/163) on classification, labelling and packaging of
11
substances and mixtures ("the CLP Regulation") harmonises the provisions and criteria for the classification and labelling of substances, mixtures and certain specific articles within the Union. It takes into account the classification criteria and labelling rules of the Globally Harmonised System of Classification and Labelling of Chemicals (the 'GHS'). The main purpose of this draft Commission Regulation is to adapt the Annexes of the CLP Regulation to the 3rd revision of the GHS and to clarify certain technical provisions and criteria in the Annexes.
Contents Regulation (EC) No 1272/2008 (notified under reference G/TBT/N/EEC/163)
Last Date For Comment
10/10/2010
28 TBT Notification No G/TBT/N/EEC/349
Country European Communities Product Vehicles.
Title Draft Commission Directive amending Annex II to Directive 2000/53/EC of the European Parliament and of the Council on end-of-life vehicles (10 pages, in English).
Contents
The draft Directive adapts to scientific and technical progress the list of materials and components which are exempted from the prohibition of the use of lead, mercury, cadmium or hexavalent chromium in materialsand components of vehicles put on the market after 1 July 2003 according to Article 4(2)(a) of Directive 2000/53/EC on end-of-life vehicles.
Last Date For Comment
10/12/2010
29 TBT Notification No G/TBT/N/FRA/117
Country France Product Smoke detectors (smoke alarms)
Title Décret relatif à l'installation de détecteurs de fumée dans tous les lieux d'habitation (Decree concerning the installation of smoke detectors in all residential buildings) (3 pages)
Contents
The notified text specifies the type of smoke detector that is to be installed in residential buildings, the requirements governing its use, and the minimum functions it must fulfil. The text also sets forth the fire safety measures that are to be taken by owners with regard to the communal areas of apartment buildings.
Last Date For Comment
10/11/2010
30 TBT Notification No G/TBT/N/FRA/118
Country France Product Processing aids used in certain foods.
Title
Arrêté du [...] modifiant l'arrêté du 19 octobre 2006 relatif à l'emploi d'auxiliaires technologiques dans la fabrication de certaines denrées alimentaires (Order of [...] amending the Order of 19 October 2006 concerning the use of processing aids in the manufacture of certain foods) (7 pages)
12
Contents The draft text amends the Order of 19 October 2006 concerning the use of processing aids in the manufacture of certain foods.
Last Date For Comment
10/13/2010
31 TBT Notification No G/TBT/N/GEO/36
Country Georgia Product Individually Designed (Handmade) Vehicles
Title
The order by the Head of the United Transport Administration of the Ministry of Regional Development and Infrastructure of Georgia #154 29 June 2010 "Technical Regulation Requirements for the Individually Designed (Handmade) Vehicles".
Contents
The present document determines requirements towards technical maintenance characteristics of a individually designed (hand-made) vehicle, its parts and devices and the procedure for assessing the compliance of the handmade vehicle with the requirements of the present regulation.
Last Date For Comment
32 TBT Notification No G/TBT/N/JPN/339
Country Japan Product Portable laser-applied equipment
Title Ministerial Ordinance Concerning Safety Requirement of Specified Products under the Charge of the Ministry of Economy, Trade and Industry, Consumer Product Safety Act.
Contents
To delete some technical requirements about battery. About the laser display, to add some requirements which demand functions to intercept a laser by shutters at the time of the trouble and decide not to apply a conventional standard about the electricity state.
Last Date For Comment
09/24/2010
33 TBT Notification No G/TBT/N/JPN/340
Country Japan Product Motor vehicles
Title Partial Amendment to the Announcement that Prescribes Details of Safety Regulations for Road Vehicles, etc.
Contents The WMTC (Worldwide Harmonized Motorcycle Certification Procedure) GTR will be introduced.
Last Date For Comment
09/15/2010
34 TBT Notification No G/TBT/N/KEN/238
Country Kenya
Product Plastic pipes for water supply (ICS: 91.140.60; 23.040.20; 23.040.45; HS: 3917.22)
Title DKS 149-3 : 20 10 Plastics piping system for water supply - Un-plasticized Poly (vinyl chloride) (PVC-U) Specification. Part 3: Nominal
13
Diameters, wall thicknesses and nominal pressures (Inch Series) 3rd edition (7 pages, in English).
Contents Deals with the inch series of Un-plasticized Poly (vinyl chloride) (PVC- U) pipes. It is to serve as a guide to manufacturers and users of the inch series.
Last Date For Comment
10/05/2010
35 TBT Notification No G/TBT/N/KEN/239
Country Kenya Product Particle boards (HS: 4410; ICS: 79.060.20)
Title DKS 2242-2: 2010 Particleboards - Specifications - Part 2. Requirements for general purpose boards for use in dry conditions (3 pages, in English).
Contents Specifies the requirements for general purpose boards for use in dry conditions.
Last Date For Comment
10/05/2010
36 TBT Notification No G/TBT/N/KEN/240
Country Kenya Product Particle boards (HS: 4410; ICS: 79.060.20)
Title DKS 2242 -3: 2010 Particleboards-- Specifications - Part 3: for boards for interior fitments (including furniture) for use in dry conditions (3 pages, in English).
Contents Specifies the requirements for boards for interior fitments (including furniture) for use in dry conditions.
Last Date For Comment
10/5/2010
37 TBT Notification No G/TBT/N/MYS/17
Country Malaysia Product Active Pharmaceutical Ingredients (API) (ICS: 11.120.01)
Title
Appendix 13: Drug Master Files and Certificates of Suitability (13 pages, in English).
(To be added as Appendix 13 to the "Drug Registration Guidance Document" for control of API).
Contents
The control of API will be incorporated into the product registration. Theamendment prescribes the mandatory requirement for the industry to submit the required technical documentation pertaining to each active pharmaceutical ingredient as part of product registration requirement. It is applicable to all active pharmaceutical ingredients.
Last Date For Comment
10/20/2010
38 TBT Notification No G/TBT/N/PRY/30
Country Paraguay Product Valves for cylinders for the storage of compressed natural gas (CNG)
14
Title
Proyecto de Resolución GMC "Requisitos para la Evaluación de la Conformidad (REC) de Válvula de Cilindro para el Almacenamiento de Gas Natural Comprimido (GNC) utilizado como Combustible a bordo de Vehículos Automotores" (Draft Common Market Group Resolution "Conformity assessment requirements for valves for cylinders for the storage of compressed natural gas (CNG) used as motor vehicle fuel") (14 pages, in Spanish).
Contents "Conformity assessment requirements for valves for cylinders for the storage of compressed natural gas (CNG) used as motor vehicle fuel", which is annexed to and forms part of this Resolution.
Last Date For Comment
10/06/2010
39 TBT Notification No G/TBT/N/PRY/31
Country Paraguay Product Valves for cylinders for the storage of compressed natural gas (CNG).
Title
Proyecto de Resolución GMC "Requisitos para la Evaluación de la Conformidad (REC) de Válvula de Cilindro para el Almacenamiento de Gas Natural Comprimido (GNC) utilizado como Combustible a bordo de Vehículos Automotores" (Draft Common Market Group Resolution "Conformity assessment requirements for valves for cylinders for the storage of compressed natural gas (CNG) used as motor vehicle fuel") (14 pages, in Spanish).
Contents "Conformity assessment requirements for valves for cylinders for the storage of compressed natural gas (CNG) used as motor vehicle fuel", which is annexed to and forms part of this Resolution.
Last Date For Comment
10/28/2010
40 TBT Notification No G/TBT/N/PRY/32
Country Paraguay Product Packaging that comes into contact with food.
Title Proyecto de Decreto para el Registro Nacional de Envases en contacto con alimentos (Draft Decree on the national register of packaging that comes into contact with food) (3 pages, in Spanish).
Contents
Approval of the document. Packaging and other elements which are likely to come into contact with food must be manufactured from appropriate materials and in accordance with good manufacturing practices to ensure that, under normal conditions of use, undesirable, toxic or contaminating components are not transferred in quantities which exceed the established maximum global or specific migration limits and pose a risk to human health or alter the organoleptic characteristics of the food.
Last Date For Comment
10/18/2010
41 TBT Notification No G/TBT/N/KOR/283
Country Republic of Korea Product Livestock products Title Proposed Draft of Amendment to the Processing Standards and
15
Ingredient Specifications for Livestock Products (1 page, available in Korean).
Contents
The main amended contents in this document are as follows:
• Establishment of definition of raw ham and revision of definition ofhams;
• Establishment of definition of fermented sausage and revision ofdefinition of sausages;
• Revision of definition of ground meat products;
Revision of wording of bottled or canned livestock products for processing standard and ingredient specification.
Last Date For Comment
10/5/2010
42 TBT Notification No G/TBT/N/KOR/284
Country Republic of Korea
Product Consumer products Warning reflex reflectors for automobiles, HS: 3926909000
Title Proposed amendments of mandatory Safety/Quality Labelling criteria on Warning reflex reflectors for automobiles (available in Korean).
Contents
This draft safety quality labelling criteria on warning devices proposes to improve the safety criteria as follows:
- The recommendation requirements such as equipments and configuration, shape and dimensions, heat test, water test, dust test, stability test will be mandatory; - The colour test of the orange fluorescent materials on the warning device will be added.
Last Date For Comment
10/5/2010
43 TBT Notification No G/TBT/N/KOR/285
Country Republic of Korea Product Medical devices
Title Proposed revision of Classification and Designation for Medical Devices (available in Korean , 44 pages)
Contents
Creation of the new criteria for the classification and grading scale of in vitro diagnosis; creation of an item, artificial eye; and clarification of terminology (e.g. creation of new items for the medical devices that are not sub classified, elimination of duplicated items and such).
Last Date For Comment
08/10/2010
44 TBT Notification No G/TBT/N/KOR/286
Country Republic of Korea Product Motor Vehicles
Title The public notification of draft enactment of "Korea Motor Vehicle Safety Standard" (available in Korean).
16
Contents
The following amendments will be made to the KMVSS:
1. ESC (Electronic Stability Control System) shall be installed to passenger vehicles and vehicles of GVW 4.5 tons or less. The changeis expected to take effect on 1 January 2012 for new models and 30 June 2014 for existing models;
2. TPMS (Tire Pressure Monitoring System) shall be installed to passenger vehicles and vehicles of GVW 3.5 tons or less. The changeis expected to take effect on 1 January 2012 for new models and 30 June 2014 for existing models;
3. AFLS (Adaptive Front Lighting System) with various beam patterns and LED light sources for headlamps, reverse lamp and daytime running lamp may be applied. The change is expected to take effect on the date of promulgation;
4. DRL (Daytime Running Lamps) may be applied to motor vehicles and motor cycles. The change is expected to take effect on the date of promulgation;
5. Brake system will be harmonized with ECE Regulation No. 13. The change is expected to take effect on the date of promulgation;
6. Side direction indicator will be harmonized with ECE Regulation No. 6. The change is expected to take effect 24 months after the date of promulgation;
Electromagnetic compatibility and indirection vision (rear-view mirrors) will be harmonized with ECE Regulations No. 10 and 46. The change is expected to take effect on 1 January 2012 for new models and 31 December 2013 for existing models.
Last Date For Comment
10/09/2010
45 TBT Notification No G/TBT/N/KOR/287
Country Republic of Korea Product Herbal medicine
Title Proposed revision of Regulations on Control of Imported Pharmaceutical Products, etc. (available in Korean, 8 pages).
Contents
This proposed revision is to add Musk to the list of items subject to laboratory inspection. Additionally, when inspecting on imported materials, it is required to put the contents of an application for inspection into an electronic system. This proposed revision also requires adding all imported raw materials of Korean oriental medicine listed on 'Korean Pharmacopoeia' or 'Korean Herbal Pharmacopoeia' to the list of items subject to laboratory inspection under the five-year comprehensive plan.
Last Date For Comment
10/16/2010
46 TBT Notification No G/TBT/N/KOR/288
Country Republic of Korea
17
Product IPTV Set-top box Title "Technical criterion for IPTV" (available in Korean, to be amended).
Contents
This criterion is to specify technical specifications of interchanging IPTVconditional access system to achieve inter-operability of IPTV Terminal Devices(set-top boxes) through IPTV Interchangeable CAS(iCAS) standard, proposed by a private standardization body, TTA (Telecommunication Technology Association). The iCAS standard is not a conditional access system itself, but a technical specification to securely download and manage the CAS S/W module(KT CAS, SK CAS, Coretrust CAS, etc.) at an IPTV Terminal device, when customers subscribe and change an IPTV service provider. The iCAS also can be applied for other CAS S/W module, because of its interchangeability. The main purpose of the iCAS is that customers have the independency from IPTV service provider, that is, customers can buy a terminal device at retail market and then they can subscribe and change IPTV service provider without changing an IPTV Terminal device.
Last Date For Comment
10/27/2010
47 TBT Notification No G/TBT/N/ZAF/127
Country South Africa Product Ice-cream, Frozen
Title Proposed regulation relating to Dairy Ice cream, Ice cream, frozen dessert and frozen yoghurt intended for sale in the Republic of South Africa, (10 pages, in English).
Contents
The proposed regulation sets out restrictions on the sale of these products, standards, packing, marking and restricted particulars on container requirements, sampling, and offences and penalties for the sale of dairy ice cream, ice cream, frozen desserts and frozen yoghurt in the Republic of South Africa.
Last Date For Comment
10/01/2010
48 TBT Notification No G/TBT/N/SWE/104
Country Sweden Product Construction products
Title
Revision of chapter 1, 2, 4 and 5 in Boverket's (Swedish National board of Housing, Building and Planning) building regulations (BFS 1993:57) with amendments up to BFS 2008:20, BBR 16 considering the work with BKR/EKS, (5 pages, in Swedish).
Contents Amendments of references
Last Date For Comment
10/22/2010
49 TBT Notification No G/TBT/N/TPKM/89
Country Taiwan Product Electric powered vehicles of categories M, N and L, and category O.
Title Public Notice under the Vehicle Safety Testing Directions (4 pages in Chinese, English translation available).
18
Contents
The Ministry of Transportation and Communications intends to regulate safety requirements for electric powered vehicles of categories M, N and L, and category O by amending the Vehicle Safety Testing Directions.
The draft for the revisions includes revision to the existing requirement of dynamic braking, steering control system the protection of driver against the steering mechanism in the event of impact, the protection ofoccupants in the event of a lateral collision, the protection of occupants in the event of a frontal collision and electromagnetic compatibility. For motor vehicles (including electric powered vehicles) of categories M, N, O and L, EMS requirements based on UN/ECE R10 will be introduced. For electric powered vehicles of categories M, N with a maximum design speed exceeding 25 km/h, the requirements based on UN/ECE R100 will be introduced, which include protection against electrical shock, protection against direct contact of parts under voltage, isolation resistance measurement method and the hydrogen emission test, etc.
For electric powered vehicles of categories L, safety regulations regarding electric motorcycles will be introduced, which make reference to the TES Electric Motorcycles Safety Specifications and Testing Procedure, Vehicle Safety Testing Directions of Prevention of Fire Risks for Large Passenger Vehicles and CNS 0980241: safety testing procedure of electric motorcycle secondary use lithium battery pack (draft).
Last Date For Comment
09/30/2010
50 TBT Notification No G/TBT/N/TPKM/90
Country Taiwan Product Prepackaged Products (HS Chapter 90)
Title Proposed Amendment to the Regulations Governing Management of Prepackaged Products. (2 pages in Chinese).
Contents
The proposed amendment to the Regulations Governing Management of Prepackaged Products is introduced to bring the current specification in line with that of related international standards. The International Recommendation OIML R87 and OIML R79 issued by the International Organization of Legal Metrology is considered to be the relevant international standard.
Last Date For Comment
10/31/2010
51 TBT Notification No G/TBT/N/TPKM/91
Country Taiwan Product Prepackaged Goods (HS Chapter 90).
Title Proposed Amendment to the Technical Specification for Net Content In Prepackage. (7 pages in Chinese).
Contents
The proposed amendment to the Technical Specification for Net Content In Prepackage is introduced to bring the current specification in line withthat of related international standards. The International Recommendation OIML R87 and OIML R79 issued by the International Organization of Legal Metrology is considered to be the relevant
19
international standard.
Last Date For Comment
10/31/2010
52 TBT Notification No G/TBT/N/THA/346
Country Thailand Product Multifunction peripherals (HS: 8471, ICS: 35.240).
Title Draft Ministerial Regulation on high efficiency multifunction peripherals (standby power) (3 pages, in Thai).
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency multifunction peripherals.
Last Date For Comment
----
53 TBT Notification No G/TBT/N/THA/343
Country Thailand Product Computers (HS: 8471, ICS: 35.240)
Title Draft Ministerial Regulation on high efficiency computers (standby power) (3 pages, in Thai)
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency computers.
Last Date For Comment
----
54 TBT Notification No G/TBT/N/THA/344
Country Thailand Product Computer monitors
Title Draft Ministerial Regulation on high efficiency computer monitors (standby power) (3 pages, in Thai).
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency computer monitors.
Last Date For Comment
----
55 TBT Notification No G/TBT/N/THA/345
Country Thailand Product Printers (HS: 8471, ICS: 35.240)
Title Draft Ministerial Regulation on high efficiency printers (standby power) (3 pages, in Thai)
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency printers.
Last Date For Comment
----
56 TBT Notification No G/TBT/N/THA/347
Country Thailand Product Scanners (HS: 8471, Title Draft Ministerial Regulation on high efficiency scanners (standby
20
power) (3 pages, in Thai)
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency scanners.
Last Date For Comment
----
57 TBT Notification No G/TBT/N/THA/348
Country Thailand Product Televisions (HS: 8528, ICS: 33.170)
Title Draft Ministerial Regulation on high efficiency televisions (standby power) (3 pages, in Thai).
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency televisions.
Last Date For Comment
----
58 TBT Notification No G/TBT/N/THA/349
Country Thailand Product Home audio system
Title Draft Ministerial Regulation on high efficiency home audio system (standby power) (3 pages, in Thai)
Contents The Ministerial Regulation covers definitions, standby and off mode power for high efficiency home audio system.
Last Date For Comment
----
59 TBT Notification No G/TBT/N/THA/350
Country Thailand Product Cables (HS: 8544;
Title
Thai Industrial Standard for Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 V - Part 3: Non-Sheathed Cables for Fixed Wiring (TIS 11 Part 3-2553(2010)) (14 pages, in Thai).
Contents
The Thai Industrial Standards Institute (TISI) has proposed to withdraw the Thai Industrial Standard for polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring (TIS 11 Part 3-2549(2006)) and replace it with TIS 11 Part 3-2553(2010) as a mandatory standard. This draft standard covers polyvinyl chloride insulated single-core non-sheathed cables for fixed wiring of rated voltages up to and including 450/750 V. All cables shall comply with the appropriate requirements given in TIS 11 Part 1 and the individual types of cables shall each comply with the particular requirements of this part.
Last Date For Comment
10/25/2010
60 TBT Notification No G/TBT/N/THA/351
Country Thailand Product Cables (HS: 8544; ICS: 29.060.20)
21
Title Thai Industrial Standard for Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 V - Part 4: Sheathed Cables for Fixed Wiring (TIS 11 Part 4-2553(2010)) (4 pages, in Thai).
Contents
The Thai Industrial Standards Institute (TISI) has proposed to withdraw the Thai Industrial Standard for polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring (TIS 11 Part 4-2549(2006)) and replace it with TIS 11 Part 4-2553(2010) as a mandatory standard. This draft standard covers light polyvinyl chloride sheathed cables of rated voltages of 300/500 V. All cables shall comply with the appropriate requirements given in TIS 11 Part 1 and the individual types of cables shall each comply with the particular requirements of this part.
Last Date For Comment
10/25/2010
61 TBT Notification No G/TBT/N/THA/352
Country Thailand Product Cable (HS: 8544; ICS: 29.060.20)
Title Thai Industrial Standard for Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 V - Part 5: Flexible Cables (Cords) (TIS 11 Part 5-2553(2010)) (17 pages, in Thai).
Contents
The Thai Industrial Standards Institute (TISI) has proposed to withdraw the Thai Industrial Standard for polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) (TIS 11 Part 5-2549(2006)) and replace it with TIS 11 Part 5-2553(2010) as a mandatory standard. This draft standard covers polyvinyl chloride insulated flexible cable (cords), of rated voltages up toand including 300/500 V. All cables shall comply with the appropriate requirements given in TIS 11 Part 1 and the individual types of cables shall each comply with the particular requirements of this part.
Last Date For Comment
10/25/2010
62 TBT Notification No G/TBT/N/THA/353
Country Thailand Product Cable (HS: 8544; ICS: 29.060.20)
Title
Thai Industrial Standard for Polyvinyl Chloride Insulated Cables of Rated Voltages up to and including 450/750 V - Part 101: Sheathed Cables for General Purposes (TIS 11 Part 101-2553(2010)) (15 pages, in Thai).
Contents
The Thai Industrial Standards Institute (TISI) has proposed to withdraw the Thai Industrial Standard for polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 101: Sheathed cables for general purposes (TIS 11 Part 101-2549(2006)) and replace it with TIS 11 Part 101-2553(2010) as a mandatory standard. This draft standard covers polyvinyl chloride sheathed copper cables of rated voltages U0/U up to and including 450/750 V used in power installations of nominal voltage not exceeding 450/750 V a.c.. All cables shall comply with the appropriate requirements given in TIS 11 Part 1 and
22
the individual types of cables shall each comply with the particular requirements of this part.
Last Date For Comment
10/25/2010
63 TBT Notification No G/TBT/N/TUR/4
Country Turkey
Product Foodstuffs, Materials and Articles in contact with Foodstuffs and Feedstuffs.
Title Regulation on the Genetically Modified Organisms and Products thereof (17 pages, in Turkish)
Contents
This regulation covers the provisions on:
a) The application, evaluation, decision, processing, packaging,labelling, monitoring, preservation, stocking, transportation,marketing, importation, exportation, transit passage, monitoring,inspection and control of genetically modified organisms andproducts thereof intended for food and feed;
b) The research and development and controlled experimentalworks of the genetically modified organisms and productsthereof to be imported or having been domestically developed;
c) The application, permission, evaluation, decision, importation,exportation, production, processing, labelling, marketing,monitoring, inspection and control of the conditions oflaboratories and facilities and relevant closed areas where theclosed area activities are conducted regarding geneticallymodified organisms and products thereof.
This Regulation is prepared in order to eliminate the risks which could originate from the genetically modified organisms and products thereof which are developed through the use of modern biotechnology and to protect the human, animal and plant health, environment and biodiversity, thus its aim is to determine the procedures and principles on:
a) The application, evaluation, decision, processing, importation,exportation, labelling, monitoring, marketing, inspection andcontrol of genetically modified organisms and products thereofintended for food and feed;
b) The activities intended for the research and development andcontrolled experimental works of the genetically modifiedorganisms and products thereof being in such a way to preventtheir contact with the external environment to be done in arestricted area in a controlled manner;
c) The research and development, application, permission,evaluation, decision, importation, exportation, production,processing, labelling, monitoring, marketing, inspection andcontrol of genetically modified organisms and products thereof..
Note: This document has also been notified under the SPS Agreement Last Date For 10/16/2010
23
Comment
64 TBT Notification No G/TBT/N/USA/562 Country United State Of America
Product Children's products, vinyl plastic film (HS 3926.20; ICS: 59.080, 61.020, 83.140, CA.001)
Title Third Party Testing for Certain Children's Products; Vinyl Plastic Film: Requirements for Accreditation of Third Party Conformity Assessment Bodies (4 pages, English).
Contents
The Consumer Product Safety Commission (CPSC or Commission) is issuing a notice of requirements that provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to the CPSC regulations under the Flammable Fabrics Act relating to vinyl plastic film. The Commission is issuing this notice of requirements pursuant to the Consumer Product Safety Act (CPSA). Effective Date: The requirements for accreditation of third party conformity assessment bodies to assess conformity with 16 CFR Part 1611 are effective upon publication of this document in the Federal Register.
Last Date For Comment
08/20/2010
65 TBT Notification No G/TBT/N/USA/565
Country United State Of America Product Plants, plant products
Title Lacey Act Implementation Plan; Definitions for Exempt and Regulated Articles (3 pages in English).
Contents
In response to recent amendments to the Lacey Act, we are proposing to establish definitions for the terms "common cultivar" and "common food crop". The amendments to the Act expanded its protections to a broader range of plant species, extended its reach to encompass products, including timber, that derive from illegally harvested plants, and require that importers submit a declaration at the time of importation for certain plants and plant products. Common cultivars and common food crops are among the categorical exemptions to the provisions of the Act. The Act does not define the terms "common cultivar" and "common food crop" but instead gives authority to the U.S. Department of Agriculture and the U.S. Department of the Interior to define these terms by regulation. Our proposed definitions would specify which plants and plant products will be subject to the provisions of the Act, including the declaration requirement.
Last Date For Comment
10/08/2010
66 TBT Notification No G/TBT/N/USA/566
Country United State Of America
Product Accessibility guidelines for transportation vehicles (ICS: 11.180, 43.040; 43.160)
Title Americans With Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles (43 pages, in English).
24
Contents
The Architectural and Transportation Barriers Compliance Board (Access Board) is proposing to revise and update its accessibility guidelines for buses, over-the-road buses, and vans. The guidelines ensure that transportation vehicles are readily accessible to and usable by individuals with disabilities. The guidelines apply to the acquisition of new, used, and remanufactured transportation vehicles, and the remanufacture of existing transportation vehicles to the extent required by regulations issued by the Department of Transportation pursuant to the Americans with Disabilities Act. The guidelines for transportation vehicles operated in fixed guideway systems (e.g., rapid rail, light rail, commuter rail, and intercity rail) will be revised and updated at a future date.
Last Date For Comment
11/23/2010
67 TBT Notification No G/TBT/N/USA/567
Country United State Of America Product Children’s products, clothing textiles (ICS: 61.020, CA.001)
Title Third Party Testing for Certain Children's Products; Clothing Textiles: Requirements for Accreditation of Third Party Conformity Assessment Bodies (5 pages, English).
Contents
The Consumer Product Safety Commission (CPSC or Commission) is issuing a notice of requirements that provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to CPSC regulations under the Flammable Fabrics Act relating to clothing textiles. The Commission is issuing this notice of requirements pursuant to the Consumer Product Safety Act (CPSA).
Last Date For Comment
----
68 TBT Notification No G/TBT/N/USA/568
Country United State Of America
Product Children’s products, mattresses, mattress pads, mattress sets (HS: 9404, ICS: 97.140, 97.190, CA.001)
Title Third Party Testing for Certain Childrens Products; Mattresses, Mattress Pads, and/or Mattress Sets: Requirements for Accreditation ofThird Party Conformity Assessment Bodies (4 pages, in English).
Contents
The Consumer Product Safety Commission (CPSC or Commission) is issuing a notice of requirements that provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to the CPSC regulations under the Flammable Fabrics Act relating to mattresses, mattress pads, and/or mattress sets. The Commission is issuing this notice of requirements pursuant to the Consumer Product Safety Act (CPSA).
Last Date For Comment
----
69 TBT Notification No G/TBT/N/USA/569
Country United State Of America
25
Product Occupant crash protection; motorcoach definitions (HS: 8708.21, ICS: 01.040, 43.020)
Title Federal Motor Vehicle Safety Standards; Motorcoach Definition; Occupant Crash Protection (25 pages, in English).
Contents
In accordance with NHTSA's 2007 Motorcoach Safety Plan and DOT's 2009 Departmental Motorcoach Safety Action Plan, NHTSA is issuing this NPRM to propose to amend the Federal Motor Vehicle Safety Standard (FMVSS) on occupant crash protection (FMVSS No. 208) to require lap/shoulder seat belts for each passenger seating position in new motorcoaches. This NPRM also proposes to require a lap/shoulder belt for the motorcoach and large school bus driver's seating positions, which currently are required to have either a lap or a lap/shoulder belt. Although motorcoach transportation overall is a safe form of transportation in the United States, several motorcoach crashes in 2008 have illustrated that motorcoach rollover crashes, while a relatively rare event, can cause a significant number of fatal or serious injuries in a single event. NHTSA's safety research on motorcoach seat belts, completed in 2009, shows that the installation of lap/shoulder belts on motorcoaches is practicable and effective. We believe that the seat belt assemblies that would be installed on motorcoach passenger seats pursuant to this rulemaking could reduce the risk of fatal injuries in rollover crashes by 77 percent, primarily by preventing occupant ejection in a crash.
Last Date For Comment
10/18/2010
70 TBT Notification No G/TBT/N/USA/570
Country United State Of America Product Children’s products,
Title Third Party Testing for Certain Childrens Products; Infant Walkers: Requirements for Accreditation of Third Party Conformity Assessment Bodies (4 pages, in English).
Contents
The Consumer Product Safety Commission (CPSC or Commission) is issuing a notice of requirements that provides the criteria and process for Commission acceptance of accreditation of third party conformity assessment bodies for testing pursuant to specific CPSC regulations relating to infant walkers. The Commission is issuing this notice of requirements pursuant to section 14(a)(3)(B)(vi) of the Consumer Product Safety Act (CPSA) (15 U.S.C. 2063(a)(3)(B)(vi)).
Last Date For Comment
----
71 TBT Notification No G/TBT/N/USA/571
Country United State Of America Product Safe transport of hazardous materials (ICS: 13.300)
Title
Hazardous Materials: Harmonization With the United Nations Recommendations, International Maritime Dangerous Goods Code, and the International Civil Aviation Organization Technical Instructions for the Safe Transport of Dangerous Goods by Air; Proposed Rule (70 pages, English).
Contents PHMSA proposes to amend the Hazardous Materials Regulations to
26
maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods--Model Regulations.
Last Date For Comment
10/25/2010
Top Related