Workshop equipment
Air Conditioners Service
Air Conditioners Service Station Car/Truck
Available with or without flushing set
Application
• Suction, filling and recycling of automotive air conditioning
systems
Product advantages
• Precise filling accuracy according to the standard SAE J2788.
Thus, a filling accuracy of 5 g and a recovery efficiency of
95% of the refrigerant are guaranteed
• Powerful vacuum pump with 180 l / min
• Windows user interface
• Integrated application videos
• External interfaces (USB, Bluetooth, ASA)
• Fully automatic program sequence
• Two new oil circuits (PAG + PAO)
• External temperature filler
• Database for cars / trucks
Technical data
Refrigerant Type: R 134 a
Refrigerant fuel tank: 20 kg
Compressor: Hermet. High-performance compressor
Performance vacuum pump: 180 l/min.
Recycling Performance: 500 g/min.
Manometer: Accuracy category 1
Operating pressure max.: 25 bar
Accuracy scale: +/- 5 g
Log output via built-in printer
Electrical connection: 220 - 240 V / 50 - 60 Hz
Service hoses: 2,5 m
Dimension(H x B x T): 128 x 69 x 69 cm
Weight: 105 kg
Delivery amount
• Basic unit including software and database
• A roll paper printer
• Service hoses
• manual
• 3 oil containers, 250 ml
• Temperature sensor 4 m length
• protective hood
• Flushing set optionally obtainable
Note
• Please note that the bottle of refrigerant is not supplied.
Refrigerants must be ordered separately.
With flushing set
Article
No.
Article
Designation
PU
Piece
129722 Air conditioning service station car/truck with flushing set 1
129749 Air conditioning service station car / truck 1
V1.7.6.5/IN
T_P_
WA
120/2/12-08-17/#890123[871131]
15.1
Workshop equipment
Air Conditioners Service Station Truck Tec
Application
• Suction, filling and recycling of bus air conditioning
Product advantages
• Very powerful vacuum pump with 283 l / min
• Fully automatic program sequence
• Longer service hoses (5 m)
• Extensions with adapter available as accessory
• 35 kg Refrigerants fuel tank
• Specially designed for buses with Bock and Bitzer
compressors
• Even trucks and cars that can be serviced
• Database for cars / trucks
Technical data
Refrigerant Type: R 134 a
Refrigerant fuel tank: 35 kg / 40 Liter
Compressor: Hermet. High-performance compressor
Recycling Performance: 650 g/min
Performance vacuum pump: 283 l/min
Manometer: Accuracy category 1
Operating pressure max.: 16 bar
Accuracy scale: +/- 5 g
Log output via built-in printer
Electrical connection: 220 - 240 V / 50 - 60 Hz
Service hoses: 5,0 m
Dimension(H x W x T): 128 x 69 x 69 cm
Weight: 120 kg
Delivery amount
• Basic unit including software and database
• 1 roll printer paper
• Service hoses
• manual
• 2 oil containers, each 2000 ml
• protective hood
Note
• Please note that the bottle of refrigerant is not supplied.
Refrigerants must be ordered separately.
Article
No.
Article
Designation
PU
Piece
129721 Air conditioning service station Truck Tec 1
V1.
7.6.
5/IN
T_P_
WA
120/
2/12
-08-
17/#
8901
23[8
7113
1]
15.2
Workshop equipment
Mobile air conditioning service station
Application
• Suction, filling and recycling of automotive air conditioners,
especially in the mobile service area
Product advantages
• Compact and light weight (60 kg)
• Ideal for mobile applications
• Extensions with adapter available as accessory
• 8 kg refrigerants fuel tank
• Even trucks and cars that can be serviced
• Database for cars / trucks
Technical data
Refrigerant Type: R 134 a
Refrigerant fuel tank: 8 kg
Compressor: Hermet. High-performance compressor
Recycling Performance: 300 g/min.
Performance vacuum pump: 70 l/min.
Manometer: Accuracy category 1
Operating pressure max.: 18 bar
Accuracy scale: +/- 5 g
Log output via built-in: via printer
Electrical connection: 230 V / 50 - 60 Hz
Service hoses: 2,5 m
Dimension (H x W x T): 95 x 55 x 52 cm
Weight: 60 kg
Delivery amount
• Basic unit including software and database
• Service hoses
• Manual
• 2 oil containers, 250 ml
• Protective hood
Note
• Semi-automatic operation
• Vacuum pump 70l/min
• Evacuation will take longer, not recommended for the
"continuous use"
• Service hoses: 2.5m
• Extension rate (2.5 m) with the same best offer
• Please note that the bottle of refrigerant is not included in
delivery. Refrigerants must be ordered separately.
Article
No.
Article
Designation
PU
Piece
129748 Mobile air conditioning service station 1
Accessories available PU
007036 Extension Hose for Air Conditioning Tech 1
V1.7.6.5/IN
T_P_
WA
120/2/12-08-17/#890123[871131]
15.3
Workshop equipment
Air Conditioners Service & Accessories
Service Hoses & Quick-lock Couplings
Application
• Extension Hose for Air Conditioning Tech:
Extension hose for air conditioning service units
• Service hose air conditioner low pressure / high pressure:
spare hose
Delivery amount
• Includes two connecting adapters
• Length: 2.5 m
Extension Hose for Air Conditioning Tech
(including two couplings)
Article
No.
Article
Designation
PU
Piece
007036 Extension Hose for Air Conditioning Tech 1
040390 Service air conditioner high pressure hose 1
040391 Service air conditioner low pressure hose 1
013901 Quick release air pressure, M 14 1
013902 Quick coupling air low pressure, M 14 1
170657 Seal kit for quick couplings 1
Printer Paper
Application
• Refillable roller for air conditioner service unit printer
Article
No.
Article
Designation
PU
Piece
014420 Printer Paper Air Conditioner KT 600 1
039056 Printer Paper 650 per air conditioner KT / KT 690 per 1
Filter Cartridge for Air Conditioning ServiceUnit
Application
• Replacement filter cartridge for air conditioner service unit
Technical data
Overall length: 285 mm
External diameter: 80 mm
Note
• For KT 500 from year of 1 / 1999 and KT 500 a (year of
manufcturing 04/2004) to serial number 514 307, air
conditioning service station car / truck
Article
No.
Article
Designation
PU
Piece
149939 Cartridge service unit from year of manufacture. 01/99 -
04/04
1
V1.
7.6.
5/IN
T_P_
WA
120/
3/12
-08-
17/#
8901
28[8
7120
0]
15.4
Workshop equipment
Filter Cartridge for Air Conditioning ServiceUnit
Application
• Filter Cartridge for air conditioner service unit
Technical data
Overall length: 299 mm
External diameter: 93 mm
Note
• For AC 400, KT 450 per, KT 490, KT 500, KT 550 a, KT 650,
KT 690 pro 514 308 from serial number, air conditioning
service station Truck Tec
Article
No.
Article
Designation
PU
Piece
007135 Filter cartridge KT 600 a / 650 a KT / KT 690 pro 1
Renault Air Adapter
Application
• Reduction of high pressure to low pressure port, especially
for Renault Laguna, Vel Satis
Article
No.
Article
Designation
PU
Piece
169469 Renault Air Adapter 1
Air Conditioner HD Adapter
Application
• Extension of the high pressure port on air conditioners,
especially for E60 BMW, Volvo, Ford
Article
No.
Article
Designation
PU
Piece
050969 Air Adapter HD BMW / Ford / Volvo 1
V1.7.6.5/IN
T_P_
WA
120/3/12-08-17/#890128[871200]
15.5
Workshop equipment
Air Conditioner Service
Airbox Cleaner II
Application
• Disinfection of air conditioners and the vehicle interior in cars
and vehicles
Main user
Car repair shops, truck repair shops, vehicle preparation
Product advantages
• Removes pollen, bacteria, fungi, nicotine
• Simple application and operation
• Optimal utilization of the active agent through fine
atomization
• Removes unpleasant odours
• Active agent has a pleasant odor
• No wet surfaces
Article
No.
Article
Designation
PU
Piece
094202 Airbox Cleaner II 1
Accessories available PU
005532 Air Clean Citrus 1/12
V1.
7.6.
5/IN
T_P_
WA
120/
4/11
-09-
22/#
7677
63[3
4178
]
15.6
Workshop equipment
Air Conditioning Assortments
O-Ring Assortment for Opel AirConditioning Systems
Application
• Maintenance work on R 134 A air conditioning systems
Main user
Truck repair shops, car repair shops, Internal workshops, body
repair
Product advantages
• All necessary O-rings in the product range
• Appropriate placement
Delivery amount
• BS-product box
• Content: 200 parts
Article
No.
Article
Designation
PU
Piece
170556 O-Ring Assortment for Opel Air Conditioning Systems 1
O-Ring Assortment for VW/Audi AirConditioning Systems
Application
• Maintenance work on R 134 A air conditioning systems
Main user
Truck repair shops, car repair shops, Internal workshops, body
repair
Product advantages
• All necessary O-rings in the product range
• Appropriate placement
Delivery amount
• BS-product box
• Content: 180 parts
Article
No.
Article
Designation
PU
Piece
170558 O-Ring Assortment for Opel Air Conditioning Systems 1
V1.7.6.5/IN
T_P_
WA
120/5/12-08-17/#865203[39510]
15.7
Workshop equipment
Valve Assortment
Application
• Repair and maintenance work on automotive air conditioning
systems
Product advantages
• All necessary parts in the assortment
• Appropriate placement
Article
No.
Article
Designation
PU
Piece
058070 Valves assortment for air conditioning 1
Accessories available PU
Piece
091532 Air conditioning cap ND
091533 Air conditioning cap 13mm ND 5
091534 Air conditioning cap 16 mm ND 5
091535 Valve core or Audi air con. systems 10
091536 Valve core for Renault/Volco air con. systems 10
091538 Valve core air conditioning Jap. / Ford 5
091539 Universal air conditioning valve core 10
091551 Opel air conditioning valve core 10
091552 Closure cap air conditioning HD / Jap. 5
058023 Air conditioning valve key special size 1
058077 Valve wrench air conditioning standard 1 pc. 1
Sealing Plug Assortment
Application
• Repair and maintenance work automotive air conditioning
systems
Product advantages
• All necessary parts in the assortment
• Appropriate placement
Article
No.
Article
Designation
PU
Piece
057863 Sealing Plug Assortment for air con. 1
Accessories available Contents PU
Piece
091527 Protective plug from 20.7 to 23.5 mm Air
conditioning
091528 Protective plug from 11.3 to 13.1 mm Air
conditioning
091530 Protective plug from 8.4 to 10.2 mm air
conditioning
091531 Protective plug from 7.6 to 9.4 mm air
conditioning
091606 Screw cap AG 5 / 8 "Air conditioning
091607 Screw cap thread 3 / 4 "Air conditioning
091608 Screw cap AG 7 / 8 "air conditioning
091609 Screw cap F 9 / 16 "air conditioning 20
091610 Screw plug IG 5 / 8 "air conditioning
091611 Screw cap IG 3 / 4 "air conditioning
091612 Female thread screw plug 7 / 8 "air
conditioning
091613 Screw cap AG 9 / 16 "air conditioning 20
V1.
7.6.
5/IN
T_P_
WA
120/
5/12
-08-
17/#
8652
03[3
9510
]
15.8
Workshop equipment
Spring Lock Assortment
Application
• Repair and maintenance work on automotive air conditioning
systems
Product advantages
• Appropriate placement
Article
No.
Article
Designation
PU
Piece
057864 Spring-Lock-Assortment for Air. Con. 1
Service set for AC-Tec
Application
• O-ring set for maintenance on R134 A air conditioning
systems
Main user
Truck repair shops, car repair shops, Internal workshops, body
repair
Product advantages
• Can be used universally
• Appropriate placement
Article
No.
Article
Designation
PU
Piece
136269 Service set for AC-Tec 1
Scope of supply Amount
136286 O-Ring R134A Green 8 mm 30
136287 O-Ring R134A Green 11 mm 30
136288 O-Ring R134A Green 14 mm 30
136289 O-Ring R134A Green 17 mm 30
136283 O-Ring R134A Green 5 mm 10
136284 O-Ring R134A Green 6 mm 10
136285 O-Ring R134A Green 7 mm 10
Closing cap M8x1 for low pressure 5
Closing cap M8x1 for high pressure 5
Valve insert VG6/R134A 5
Valve insert VG5/R134A 5
Valve wrench for air conditioning 1
V1.7.6.5/IN
T_P_
WA
120/5/12-08-17/#865203[39510]
15.9
Workshop equipment
Gear Lifter
Hydraulic Universal Gear Lifter
Application
• Mounting and dismounting of gears and engines
• Service and maintenance works, e.g. supporting the exhaust
during mounting or dismounting
Product advantages
• Easy operations with feet by one single person
• Time saving and rational
Technical data
Lifting capacity: 600 kg
Standing area: 580 x 500 mm
Article
No.
Article
Designation
Height
mm
PU
Piece
168751 Hydraulic Universal Gear Lifter 1140 - 1990 1
Spares PU
Piece
047545 Lowering Handwheel 1
047548 Spare roll for gear lifter 1
558753 Hydraulic Universal Gear Lifter 1
558788 Swivel Head 1
047549 Pump element set 1
V1.
7.6.
5/IN
T_P_
WA
120/
6/12
-08-
17/#
7677
74[3
7141
]
15.10
Workshop equipment
Craftsman Boy ''Quick Lock'' 500-80/ -110
Application
• Stabile fast support for lifting, pressing, aligning and
spreading
Product advantages
• Fast release lever allows desired empty lift pre-selection per
hand
• Fast adjustmens as 1 turn of the crank mechanics = 4 cm lift
change
• Can be delivered in 2 lengths
• Loadable up to 500 kg
Properties
500-01 General attachment piece: support of the exhaust
during mounting or demounting, 500-01 attachment piece:
lifting, lowering the gearbox or in connection with the driving
cart to transport, tiltable, adjustable in all directions in the
width, standpipe with base plate: Welding on an existing
underground, welding on the driving chart as bottom holder for
the fast support Driving cart incl. standpipe: 4 ball beared rolls,
2 pieces with brakes, loadable up to 150 kg, size 55 x 55 cm
Driving Chart with Standpipe and
Attachment Piece Gearbox
Standpipe
with
Attachment
Piece
GeneralArticle
No.
Article
Designation
Height
mm
PU
Piece
071030 Craftsman-Boy 800 - 1500 1
071048 Craftsman-Boy 1100 - 2000 1
Accessories available PU
Piece
071072 Standpipe 500-03 1
071153 General Attachment Piece, General 500-01 1
071170 General Attachment Piece, Gearbox 500-02 1
071218 Driving Chart 500-04 1
V1.7.6.5/IN
T_P_
WA
120/6/12-08-17/#767774[37141]
15.11
Workshop equipment
Tire Filler
Calibrated Tire Inflator
Application
• Mobile tire in the interior and exterior
Technical data
Operating pressure: max. 7 bar
Properties
13 litre storage tank, over-pressure valve
Delivery amount
• Incl. pipe for automatic valve in order to be integrated into
the compressed air
Article
No.
Article
Designation
PU
Piece
169479 Calibrated Tire Inflator 1
Spares PU
400122 Automatic Inflation Valve 1
400319 Manometer 0-12 bar, G 1/8" backward 1
Uncalibrated Hand Tire Inflator
Application
• Connection to the compresseda air pipe
Product advantages
• Manometer with rubber jacket for protection against
damages
Technical data
Operating pressure: 0 to 10 bar
Article
No.
Article
Designation
PU
Piece
214264 Uncalibrated Hand Tire Inflator 1
Calibrated Hand Tire Inflator
Application
• Connection to the compressed air pipe
Product advantages
• Manometer with rubber jacket for protection against damage
Technical data
Operating pressure: 0 to 10 bar
Article
No.
Article
Designation
PU
Piece
161870 Calibrated Hand Tire Inflator 1
Accessories available PU
Piece
018033 Replacement Hose 1
030658 Gas Station Plug with Pipe 1
172014 Tire Valve 5702 1
V1.
7.6.
5/IN
T_P_
WA
120/
7/12
-08-
17/#
7676
14[3
8604
]
15.12
Workshop equipment
Calibrated Hand Inflator with UniversalLever
Application
• Connection to compressed air pipe
Product advantages
• Tried and tested, maintenance free design
• With long universal operating lever for less power usage
• Stable design
• Suitable for filling with nitrogen
Technical data
Operating pressure: 0 to 10 bar/140 psi
Weight: 1.250 g
Article
No.
Article
Designation
PU
Piece
052788 Calibrated Hand Inflator, with Universal Lever 1
Accessories available PU
149299 Replacement Pipe 1
V1.7.6.5/IN
T_P_
WA
120/7/12-08-17/#767614[38604]
15.13
Workshop equipment
Oil Collecting and Gathering Tools
Oil Vacuum and Oil Collecting Device 44085
Product advantages
• Fast and easy tank discharge via compressed air connection
• Fill level can be read on the external viewing
• Transparent suction head/screen glass with 8 l volume for
control
• Collecting bowl with sieve insert, with stop cock, turnable
and height adjustable
• Sieve insert functions as a filter and at the same time for
dripping off of the dismounted filter
Technical data
Capacity suction head: 8 l
Air pressure for low air reduction: 7 bar
Time for generation of negative pressure: 2.5 – 3 min
Suction speed: 1.5 – 2 l/min (Oil temperature 70 °C –80 °C,
Probe Ø 6 mm)
Max. discharge pressure: 0.5 bar
Collecting tank-Ø: 43.4 cm
Noise exposure: 75 dB
Tank-Ø: 42 cm
Height: 140 cm – 166 cm
Weight: 41 kg
Delivery amount
• Incl. 6 different probes Ø 5 – 8 mm, length 70 – 100 cm and
3 adapters (Volkswagen, BMW, Citroën)
Article
No.
Article
Designation
Volume
l
Volumes
Waste oil l
Collecting Pan
volumen l
Discharge Hose
m
Discharge Pressure
bar
PU
Piece
043689 Oil Collecting and
Gathering Device 44085
80 62 16 2 0,5 1
Spares PU
047516 Swivel Castors 2 units 1
047517 Fill Level Indicator 1
047518 Probe Set for Oil Suction Device 44085 (Content: 6 units) 1
051168 Discharge Hose KR 4204 1
051169 Plexiglass Cylinder KR 4306 1
051170 Upper (Lower Part for Glass Cylinder KR 4307) 1
051172 Wheel Set stiff KR 8012 (Content: 2 units) 1
051166 Seal Kit KR 4453 1
051171 Holder for Fill Level Indicator KG 079 1
Suction Probes
Application
• Audi A4/A5
Article
No.
Article
Designation
Ø
mm
Length
mm
Material PU
Piece
054622 Suction Probe for Oil Suction 5 950 Plastic 1
054624 Suction Probe for Oil Suction 6 1500 Plastic 1
V1.
7.6.
5/IN
T_P_
WA
120/
8/11
-10-
07/#
7676
42[2
6306
7]
15.14
Workshop equipment
Old Oil Collecting Device 42085
Product advantages
• Fast and simple discharging via compressed air connection
• Filling level rcan be read on the external viewing tube
• Collecting pan with sieve insert, with closing valve, turnable
and height adjustable
• Sieve insert serves as filter and at the same time for the
drpiing off of the unmounted filters
Technical data
Max. discharge pressure: 0.5 bar
Collecting pan-Ø: 43.4 cm
Height: 136 cm – 166 cm
Tank-Ø: 42 cm
Weight: 33 kg
Article
No.
Article
Designation
Volume
l
Volume
Waste oil l
Collecting Pan
volume l
Discharge Hose
m
Discharge Pressure
bar
bar
PU
Piece
043954 Old Oil Coll. Device 42085 80 62 16 2 0,5 1
Spares PU
051167 Sealing Set KR 4254 (Content: 9 O-Rings) 1
047516 Swivel Castors 2 units 1
V1.7.6.5/IN
T_P_
WA
120/8/11-10-07/#767642[263067]
15.15
Workshop equipment
Exhaust Suction Devices and Accessories
Exhaust Suction Device for Cars
Product advantages
• Driveable, handy device for an exhaust-free workplace
• Suitable for cars and trucks due to height adjustment
Technical data
Motor single phase: 220 V/0,75 HP
Suction performance: 750 m³/h
Mains safety: min. 6 A
Suction hose (cannot be driven over): Ø 125 mm/6 m
Temperature resistance: up to +110 °C
Ventilator casing: Sound proofed 73 dBA
Max. dimensions: 54 x 55 x 100 cm
Weight: 33 kg
Article
No.
Article
Designation
PU
Piece
158930 Exhaust Suction Device for Cars 1
Suction Hose and Rubber Funnel with Pliers
Application
• Particularly suitable for the suction of vehicle and truck
exhausts in over floor facilities
• Rubber funnel with pliers suitable for e.g. BMW-Diesel,
Mercedes CDI, VW/Audi TDI
Properties
Very good chemical resistance, especially against oil and
benzine vapors, temperature resistance up to +180°C, light
and flexible spiral hose made of coated polyester fabric, can be
run over with limits
Note
• Hose can be delivered in meters from 1m.
Please determine exact length when ordering!
Article
No.
Article
Designation
Ø
mm
PU
Piece
158927 Exhaust Hose 75 1
158926 Exhaust Hose 100 1
158924 Exhaust Hose 125 1
158922 Exhaust Hose 150 1
158929 Rubber Funnel with Pliers 60° 75 1
158928 Rubber Funnel with Pliers 60° 100 1
V1.
7.6.
5/IN
T_P_
WA
120/
9/12
-08-
17/#
7675
05[3
8648
]
15.16
Workshop equipment
Decanting and Filling Devices
Bleeding Device Mineral Oil 20 HY
Filling and Deaeration Device for Hydraulic Oil
Application
• Bleeding and filling of hydraulic couplings and hydraulic-
pneumatic gear-changes
Main user
Forwarding agents, truck repair shops
Product advantages
• Time saving due to one man operation
• Device protection by final switch off empty supply tank
• Pressure adjustment possible
• No mixing risk with other bleeding devices (mineral oil =
green; brake bleeding devices = blue) due to color difference
Technical data
Oil supply tank/container: 20 l
Operating pressure: 0 – 4 bar
Filling hose length: 3.60 m
Dimensions (W x H x D): 960 x 500 x 400 mm
Weight: 28 kg
Note
• For Mercedes Dealers: Retrieval of the approval in the
system „GOTIS“ possible under the No. A25-35-07.0
Article
No.
Article
Designation
PU
Piece
023073 Bleeding Device Mineral Oil 20 HY 1
Accessories available PU
Piece
011702 Adapter HST (Agricultural/Contr. Machine) 1
047534 Filling Hose 4.0 m with couplings 1
V1.7.6.5/IN
T_P_
WA
120/10/11-10-07/#767594[38670]
15.17
Workshop equipment
Cooling Water Filling Device II
Application
• Filling and leakage control of the cooling system
Product advantages
• Leakage control of the cooling system by vacuum
• No afterward deaeration necessary
• No need to warm up the motor
• Fast refilling of the cooling system without air lock
Technical data
Operating pressure: 6.0 – 10 bar
Max. air consumption: approx. 125 l/min./6 bar
bar connection: G 1/4 " I Temperature
Temperature: -20 °C to +60 °C
Adapter sizes: Ø 16 – 33 mm, 23 – 42 mm, 34 – 52 mm
Delivery amount
• Delivered in practical plastic box including vacuum generator,
manometer unit, suction hose and 3 adapters
Storage container 20 l
Article
No.
Article
Designation
PU
Piece
099989 COOLING WATER FILLING II 1
Accessories available PU
100035 Storage container 20l 1
V1.
7.6.
5/IN
T_P_
WA
120/
10/1
1-10
-07/
#767
594[
3867
0]
15.18
Workshop equipment
Stainless Steel Spraying Device
Stainless Steel Spraying Device 24 l
Application
• Can be used for all alkaline agents (fluids complying width
PH value 7 to PH value 14)
Product advantages
• Driveable stainless steel version with 24 l capacity
• Can be used independent of the compressed air systeme
Technical data
Operating pressure: max. 7 bar
Properties
With over-pressure valve
Delivery amount
• Spraying lance with extension up to 1.5 m
Article
No.
Article
Designation
PU
Piece
092379 Stainless Steel Spraying Device 1
Spares PU
148626 Spraying Lance 1
047536 Spiral Hose 1
V1.7.6.5/IN
T_P_
WA
120/11/11-10-07/#767845[149328]
15.19
Workshop equipment
Engine lifter
Engine-Lifter "Lift & Tilt"
Application
• Mounting/unmounting or tilting engines
Product advantages
• Safe back-stop at any inclined position
• Simple operation with 1/2" ratchet
• Inclination up to 45° in every direction
• Compact full-steel construction
Technical data
Weight: 1,7 kg
Length of wire-rope: approx. 86 cm
Delivery amount
• Without shackle and spring hook
Article
No.
Article
Designation
Bearing
capacity
t
PU
Piece
162306 Engine Lifter 0,9 1
Mini Engine Lifter 8275
Application
• Transport and lifting of engines, gearboxes
Product advantages
• Adjustment mechanism independent for both chains
• Full of the lifting by centimeter accurate quick adjustment of
the chain
• Labeling hanger with integrated chain control gauge
Technical data
Chain member strength: 4 mm
Weight: 1.24 kg
Bearing capacity at an angle of 0° to 45°: max. 880 kg
Bearing capacity at an angle of 45° to 60°: max. 630 kg
Properties
Suspension zinc plated, fine membered, robust round steel
chain with special paint coating (overheating indicator)
Article
No.
Article
Designation
Bearing
capacity
t
PU
Piece
421057 Mini-Lifter 0,88 1
V1.
7.6.
5/IN
T_P_
WA
120/
12/1
1-10
-07/
#767
744[
3870
7]
15.20
Workshop equipment
Jumbo Lifter 8279
Application
• Transport and lifting engines, gearboxes
Product advantages
• Full usage of the lifting centimeter adjustment of the chain
Technical data
Member strength of the chain: 6 mm
Weight: 3.1 kg
Bearing capacity at an angle of 0° to 45°: max. 1600 kg
Bearing capacity at an angle of 45° to 60°: max. 1120 kg
Properties
2 hooks with safety hatch, slender edge robust
13 round steel chain
Article
No.
Article
Designation
Bearing
capacity
t
PU
Piece
558672 Jumbo Lifter 1,6 1
Motor Bridge MB
Application
• Mounting and unmounting or lifting of motors, gearboxes
Technical data
Min. width: 1.10 m
Max. width: 1.61 m
Height: 200 mm
Spindle lift: max. 230 mm
Length lift chain: 1.20 m
Bearing capacity: max. 250 kg
Properties
2 adjustable lifting spindles enable a universal use, universal
adjustable bridge width (diagonal), appropriate for engines
mounted lengthways
Delivery amount
• Inclusive lifting chain
Article
No.
Article
Designation
PU
Piece
372080 Engine Bridge MB 1
Scope of supply Amount
165522 Lifting Spindle MB 1-35 1
374032 Lifting Chain MB 1-120 1
V1.7.6.5/IN
T_P_
WA
120/12/11-10-07/#767744[38707]
15.21
Workshop equipment
Workshop Cranes
Workshop Cranes 8276/8277
Product advantages
• Load hook lock for safe transport of pieces in the workshop
• Less need for stand surface and mobility in the workshop
foldable carriage
• Secure positioning, e.g. during engine installation, by
opening the hand wheel a release to any desired height is
achieved
• Wide carriage for load stability at highest load
Properties
High bearing capacity up to 500kg resp. 1000 kg
Technical Data 8276 8277
Dimension when folded (W x H x D): 1560 x 400 x 380 mm 1680 x 450 x 389 mm
Length of chassis: 1570 mm 1740 mm
Chassis (outer/inner): 900/780 mm 980/840 mm
Discharge: 1000 - 1300 mm 1170 - 1470 mm
Bearing capacity (depending on discharge): 150 - 500 kg 300 - 1000 kg
Height max.: 2360 mm 2320 mm
Height min.: 400 mm 550 mm
Weight: 80 kg 122 kg
Article
No.
Article
Designation
Bearing capacity
t
PU
Piece
558796 Workshop Crane 8276 0,5 1
558869 Workshop Crane 8277 1 1
V1.
7.6.
5/IN
T_P_
WA
120/
13/1
1-10
-07/
#767
549[
3880
4]
15.22
Workshop equipment
Parts Washing Device
Parts Washing Device 7178
Application
• Fast cleaning of detached or fixed parts directly on the
vehicle, e.g. under the service lift
Product advantages
• Integrated air gun for drying
• Fluid transport only by pressure pads
• Externally located level indicator for control of the fluid level
• Separate discharge tap for removal of used cleaning fluid
• A closing plug at the vessel bottom provides the possibility to
remove deposited dirt
• Transport quantity of the cleaner is adjustable via the
integrated pressure reducer
Technical data
Inner dimensions of the washing tank (L x W x D): 635 x 475 x
200 mm
Supply tank: 65 l
Total height: 1.10 m
Operating pressure (adjustable at the edvice): 0.5 bar
Properties
2 cleaning possibilities: Intensive cleaning with cleaner per
washing brush or automatic cleaning via the rolling bath
Note
• Optimally effective with the environmentally friendly Berner
Special Cleaner
Article
No.
Article
Designation
PU
Piece
219983 Parts Washing Device 7178 - 65 l 1
Accessories available Packaging Content PU
Piece
017410 Special Cleaner Canister 30 l 1
017464 Special Cleaner Barrel 60 l 1
222798 Brush Parts Washing D. 1
V1.7.6.5/IN
T_P_
WA
120/14/11-10-07/#767599[39033]
15.23
Workshop equipment
Wheel Mounting Chart Easy Lift
Easy Lift Wheel Mounting Device
Pressure operated, driveable wheel mounting device forMounting, unmounting and for transport of wheels
Product advantages
• 2 additional compressed air connections for impact wrench
and tire pressure tester
• One-hand operation, sensitive controlling
• Height adjustable, in two separated tool trays
• Safety chassis with 4 swivel casters (2 with locking brake)
• Sidely fixation possibility for torque wrench, tire tester etc.
• Easy, fatigue-free working due to the impact wrench balancer
(Accessories ) -> longer lifetime of the impact wrench
Technical data
Bearing capacity: 60 kg
kg lift: 1440 mm
Max. tire-Ø: 295/25 R 22
Weight: 60 kg
With spring pull appliance and
Balancer
Article
No.
Article
Designation
PU
Piece
036386 Spring pull appliance with Balancer 1
036389 Easy Lift Wheel Mounting Device 1
V1.
7.6.
5/IN
T_P_
WA
120/
15/1
1-10
-07/
#767
621[
1983
88]
15.24
Workshop equipment
Air-Hydraulic Jack
Transportable Air Hydraulic Jack
Application
• Lifting heavy vehicles e.g. trucks, busses etc.
Main user
Forwarding agents, truck repair shops, Internal workshops
Product advantages
• Very operating-friendly – lifting, lowering, controlling and
carrying are integrated in one function
• Integrated safety valve against overloading
• Handy design – without loose hoses, handles and valves
• Chrome-plated piston rod guarantees long lifetime
• Manual dead man’s control for safe lifting and lowering
• Portable – extreme low weight of only 25 kg
• Ideal for mobile use/service
• Adequate transport securing for safe storage in the service
car or as wall holding in the workshop
Technical data
Air pressure: 9 – 12 bar (130 – 170 psi)
Air consumption: 500 l/min.
Delivery amount
• Incl. 2 extension pieces with 50 mm and 100 mm
Note
• Delivery without plug-in nipple for this purpose the plug-in
nipple G 1/4" I (Prod.-No. 119377) should be used.
Transport Securing
Model B25-2
Bearing capacity 1. level T1 t 25
Bearing capacity 2. level T2 t 10
Length handle A mm 510
Length of frame B mm 540
Min. height C mm 162
Max. lift height Level 1 D mm 234
Max. lift height Level 2 E mm 317
Frame width G mm 225
Width with wheels H mm 271
Extension I mm 50 / 100
Weight kg 25
Article
No.
Article
Designation
PU
Piece
081233 25 /10 Portable Air Hydraulic Jack 1
Accessories available PU
081594 Transport Securing 1
119377 CA 5121 Plug-In Nipple 1 V1.7.6.5/IN
T_P_
WA
120/16/11-10-07/#767757[39041]
15.25
Workshop equipment
Air Hydraulic Jack
Application
• Lifting heavy vehicles like trucks, busses etc.
Main user
Forwarding agents, truck repair shops, Internal workshops
Product advantages
• Overloading protection by integrated safety valve
• Supply line can be detached after lifting the vehicle
• Hard chrome-plated piston rod ensures long service life
Delivery amount
• Incl. 2 extension pieces with 75 mm each
Model 8245/25-2
Model 8246/50-2
Model 8247/50-3
Saddel
Extension 250 mm
Modell 8245/25-2 8246/50-2 8247/50-3
Bearing capacity 1.
Level
T 1 t 25 50 50
Bearing capacity 2.
Level
T 2 t 10 25 25
Bearing capacity 3.
Level
T 3 t - - 10
Height A mm 180 220 150
Max. lift height level 1 B mm 272/25 t 337/50 t 210/50 t
Max. lift height level 2 C mm 375/10 t 445/25 t 263/25 t
Max. lift height level 3 D mm - - 332/10 t
Length frame E mm 765 810 810
Length lever F mm 1360 1360 1360
Frame width G mm 160 200 200
Width with wheels H mm 310 310 310
Weight kg 60 80 67
Article
No.
Article
Designation
PU
Piece
114535 Air Hydraulic Jack 8245/25-2 1
114536 Air Hydraulic Jack 8247/50-3 1
114537 Air Hydraulic Jack 8246/50-2 1
Accessories available PU
Piece
114538 Extension 250 mm 1
114539 Saddle 1
V1.
7.6.
5/IN
T_P_
WA
120/
16/1
1-10
-07/
#767
757[
3904
1]
15.26
Workshop equipment
Workshop Presses
Workshop Press P 25 H, 40 H, 60 H, 100 H
Product advantages
• Sideward adjustable press cylinder
• Table height adjustment with help of the press cylinder
• Integrated manometer
• Removable piston
Properties
Compact pump with double effective, pneumatically controlled
rapid traverse of the press cylinder
Delivery amount
• Incl. 2 prism straightening blocks
Note
• Mandrels Ø 10, 12, 15, 17, 20, 22, 25, 30 mm including
holder for the fixation at the press available as accessories
• Press plate available as accessory
• The prism plate is necessary to force on and out bearings at
rear axles, gears and motors
• The 100 t workshop press included in the pack can only to be
purchased upon special procurement.
Press Plate
Mandrel Set with
Holder
Prism Plate K L-0095-1
Technical Data
P 25 H P 40 H P 60 H P 100 H
Pressure (t): 25 40 60 100
A (mm): 720 850 1010 1100
B (mm): 1010 1190 1390 1600
C (mm): 240 265 310 300
D (mm): 200 300 300 300
E (mm): 75-775 85-785 180-780 75-675
F (mm): 1732 1740 1982 2042
G (mm): 170 210 259 325
H (mm): 540 600 680 800
L (mm): 140 140 120 120
Weight (kg): 214 420 615 1190
Article
No.
Article
Designation
PU
Piece
116941 Workshop Press P 40 H 1
116948 Workshop Press P 60 H 1
116949 Workshop Press P 25 H 1
Accessories available PU
Piece
004497 Press Plate (new models) 1
004498 Mandrel Set with Holder (new models) 1
255556 Prism Plate KL-0095-1
Scope of supply Amount
Workshop Press P100 H 1
V1.7.6.5/IN
T_P_
WA
120/17/11-10-07/#767530[39061]
15.27
Workshop equipment
Pump/Suction MachinesApplication
• Transferring or extracting fluids
Suction Pump
Product advantages
• Suitable for brake and cooling fluids, oil, windshield washing
water = 4 fluids with 1 device
• Stable metal design made from stainless material
Technical data
Suction/pumping capacity: 0.4 l/stroke
Hose length 1/2: 30 cm/120 cm
Article
No.
Article
Designation
PU
Piece
748919 Suction Pump 1
Universal Fluid Suction Device
Product advantages
• Can be used for brake fluid, motor oil, gear oil, wind shield
washer systems, cooling agents and other non-flammable,
explosive fluids
• Discharge valve for time saving and clean disposal of the
fluids via a hose in a disposal tank
• Also works without direct connection to the compressed air
network
• Over pressure function for the discharge of old and refill of
new fluid
• Multifunctional, ergonomic turn-grip for diverse applications
• Low noise level -> increased working comfort
• Fast and simple operation
Prod. no. 59161
Prod. no. 59160
Technical Data 2,5 l 12 l
5.5 - 12 bar 5.5 - 12 bar
Vacuum Max. 85 % Max. 85 %
Connection Thread G 1/4'' I G 1/4'' I
Tank Volume 2.5 liter 12 Liter
Temperature Range -20 °C to +80 °C -20 °C to +80 °C
Noise Level 79 dBA at 6 bar 79 dBA at 6 bar
Air Need/Vacuum 80 l/Min. at 6 bar 80 l/Min. at 6 bar
Air Need/Pressure 35 l/Min. at 6 bar 35 l/Min. at 6 bar
Diameter 175 mm 250 mm
Height 280 mm 530 mm
Weight 2.0 kg 4.4 kg
Content Blue suction lance (outer Ø 5.02 mm) user guide hose outer Ø 12 mm
x inner Ø 6.3 mm x 1000 mm long incl. user guide
Blue suction hose (outer Ø 5.02 x 1000 mm) + black suction user
guide hose (outer Ø 8 x 1000 mm) both sloped grinded at the end
Suction hose Outer Ø 12 mm x Inner Ø 6,3 mm x 1000 mm connection
hose Ø 18 mm x 1500 mm long with coupling and rubber adapter incl.
user guide
Article
No.
Article
Designation
PU
Piece
059161 Universal Fluid Suction Device 2.5 l 1
059160 Universal Fluid Suction Device 12 l 1
V1.
7.6.
5/IN
T_P_
WA
120/
18/1
1-09
-26/
#767
627[
3920
8]
15.28
Workshop equipment
Metal Barrel Pump
Product advantages
• Suitable for oil-based fluids
• Fits all 50- to 200-liter barrels
• Telescope pipe can be extended step-free
Technical data
Transport Performance: 0,33 l/Lift
Length of telescope pipe: 480 – 890 mm
Connection: 2" or M 66
Properties
Metal pump with plastic jacket handle
Note
• Not suitable for greases, acids, benzine, water-based fluids
and antifreeze
Article
No.
Article
Designation
PU
Piece
706698 Barrel Pump 1
Plastic Barrel Pump
Product advantages
• Suitable for oil, benzine, diesel = 3 fluids with 1 device
• Fits 2 different barrel threads
• Telescope suction pipe, thus variable lengths
• Low pump weight, therefore light and transportable
• Fits all 50- to 200 litre barrels
Technical data
Connection: G 2" and G 1.1/2"
Length of telescope suction pipe: 340 – 900 mm
Weight: 0.85 kg
Properties
Plastic jacket handle
Delivery amount
• Incl. mounting guide and screws
Note
• Not suitable for solutions, acids, solvents and agents of the
risk class A I and A IIAdapter
FasspumpeArticle
No.
Article
Designation
PU
Piece
148966 Plastic Barrel Pump 1
Accessories available PU
Piece
003569 Adapter for Barrel Pump for 200 l Barrel 1
V1.7.6.5/IN
T_P_
WA
120/18/11-09-26/#767627[39208]
15.29
Workshop equipment
Car Jacks
Hydraulic Jack
Properties
Heavy version, CE tested
5 t 10 t
Technical Data
5 t 10 t
Bearing capacity 5000 kg 10000 kg
Stamp lift 195 mm 225 mm
Screw height 160 mm 175 mm
Weight 6.5 kg 9.8 kg
Min. height 280 mm 320 mm
Max. height 640 mm 710 mm
Article
No.
Article
Designation
Bearing
capacity
t
PU
Piece
170100 Hydraulic Jack 5 1
170096 Hydraulic Jack 10 1
Hydraulic Trolley Jack
Product advantages
• Secured against unintended release
• Wide and stable frame construction made of high-strength
steel
• Very good maneuver capability enables maneuvers in narrow
areas
• Model 8300 and 8315 are furnished with plastic wheels, thus
less development of noise
• Ergonomically designed operating lever
Delivery amount
• Mass produced with fast feet lever (except 2 t)
• Models 8315/1.3 H and 8300/2C with plastic wheels 8300/2K
8315/1,3H
8242/4
8305/5
Technical Data
8300/2 K 8315/1.3 H 8242/4 8305/5
Bearing capacity
kg
2000 1300 4000 5000
Min. height mm 80 80 140 140
Max. height mm 495 735 605 975
Frame length mm 660 940 800 1290
Lever length mm 950 950 950 1200
Max. frame 160 160 240 265
Max. width mm 410 480 500 525
Net weight kg 31 39 95 170
Fast foot lever X X X
Article
No.
Article
Designation
Bearing
capacity
t
PU
Piece
167445 Trolley Jack 1,3 1
159582 Trolley Jack 2 1
114133 Trolley Jack 4 1
004192 Trolley Jack 5 1
V1.
7.6.
5/IN
T_P_
WA
120/
19/1
2-08
-17/
#767
560[
4213
5]
15.30
Workshop equipment
Accessories for Hydraulic Trolley Jack
Properties
Saddle panel: Rubber coating Ø 110 mm for 8300/1.3H,
8300/2C and axle traverse from man. year 08/01
-Rubber coating Ø 160 mm for model 8240 and axle traverse
up to man. year 08/01
-Rubber: Improved trolley ability of the trolley jacks in unloaded
condition
-Note: Observe the number of fixation points at the corpus!
-Axle traverse: For levering of front wheel drives without front
traverse
-Load capacity: 1000kg
-Suitable for: 1.3t and 2t jacks
-Reception tappet diameter: 25mm
-Adjustment range: 745 – 1150mm
Pillion
Rubber Wheels
Axle traverse
Article
No.
Article
Designation
PU
Piece
002959 Transport Rubber Set 1
114130 Saddle Panel 8240-41/1 1
114136 Saddle Panel Axle Traverse 1
159754 Saddle Panel 8300/1 1
Replacement Parts for Hydraulic Trolley Jack
Article
No.
Article
Designation
PU
Piece
040355 Spare Wheel stiff for 8300/8315 1
040386 Spare Wheel turnable for 8300/8315 1
057904 Spare Wheel stiff for 8242/4 1
057905 Spare Wheel turnable for 8242/4 1
V1.7.6.5/IN
T_P_
WA
120/19/12-08-17/#767560[42135]
15.31
Workshop equipment
Starter/Charging Devices
Booster-Pac 12 V/1600 A
Application
• Starting or restarting a vehicle, power supply when replacing
the vehicle battery
Product advantages
• Charging automatic-electric circuit prevents over-charging
• Allows the preservation of data and codings in the vehicle by
connecting the Booster at the lighter
• Enables the operation of 12 V direct current devices, which
have a lighter plug
Technical data
Dimensions LxWxH: 330 x 90 x 265 mm
Weight: 8 kg
Capacity: 16 Ah high 16 Ah high voltage current > 700 A
Cable length: approx. 900 mm
Properties
CE tested, also appropriate for maintenance-free gel batteries
Delivery amount
• Incl. charging device and extension cable for lighter
Note
• Firstly connect the positive (red) charging clamp to the
positive pole clamp, than the negative (black) charging clamp
to the mass of the vehicle or to the negative pole clamp,
resp. observethe notes of the vehicle manufacturer. After
use, immediately connect to the charging device.
Article
No.
Article
Designation
PU
Piece
165870 Booster-Pac 12 V/1600 A 1
Spares PU
047539 Casing Back
047540 Holster Minus 1
047541 Holster Plus 1
V1.
7.6.
5/IN
T_P_
WA
120/
20/1
2-08
-17/
#767
606[
8883
7]
15.32
Workshop equipment
Truck-Pac 12/24 V/3200 A
Application
• Starting or restarting a vehicle, power supply when replacing
the vehicle battery
Product advantages
• Charging automatic-electric circuit prevents over-charging
• Allows the preservation of the data and codings in the
vehicle by connecting the Booster at the lighter
• Enables the operation of 12 V direct current devices, which
have a lighter plug
Technical data
Dimensions LxWxH: 340 x 175 x 400 mm
Weight: 17 kg
Capacity: 35 Ah high voltage current > 700 A
Cable length: 1400 mm
Properties
CE tested
Delivery amount
• Incl. charging device and extension cable for lighter
Note
• Firstly connect the positive (red) charging clamp to the
positive pole clamp, than the negative (black) charging clamp
to the mass of the vehicle or to the negative pole clamp,
resp. regard the notes of the vehicle manufacturer After use,
immediately connect to the charging device.
Article
No.
Article
Designation
PU
Piece
167013 Truck-Pac 12/24 V / 3200 A 1
Accessories
Cable Lighter
Charging Device
Article
No.
Article
Designation
PU
Piece
027245 Charging Dev. for BOOSTER-/TRUCK PAC 1
V1.7.6.5/IN
T_P_
WA
120/20/12-08-17/#767606[88837]
15.33
Tool cabinets and storage cabinets
Chests of drawers
Chest of drawers mod. 100
Properties
Incl. 7 drawers, bicolored, light gray casing RAL 7035, drawers
dist ant blue RAL 5023, single extension, extendable by 80%,
max. load 80 kg, central locking
Height of the individual drawers: 1 x 60, 2 x 90, 1 x 1 20, 2 x 1
50, 1 x 240 mm
Fig. 1:
16 tray plates, 60 cavity
plug-in partitions
Fig. 2:
5 compartment rails, 20
compartment partitions
Fig. 3:
3 compartment rails, 14
compartment partitions
Fig. 4:
1 compartment rail, 2
compartment partitions
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
165302 Chest of drawers mod. 100 1020 x 715 x 700 1
Accessories available PU
165306 Drawer inserts set contains: 1
Fig. 1: Insert for drawer 60 mm 1
Fig. 2: Insert for drawer 90 mm 1
Fig. 3: Insert for drawer 90 mm and 120 mm 2
Fig. 4: Insert for drawer 150 mm 2
V1.
7.6.
5/IN
T_P_
WA
140/
1/11
-10-
07/#
7679
14[6
0974
]
15.34
Tool cabinets and storage cabinets
Chest of drawers mod. 200
Properties
Incl. 7 drawers, bicolored, light gray casing RAL 7035, drawers
dist ant blue RAL 5023, single extension, extendable by 100%,
max. load 10 0 kg, central locking. Height of the individual
drawers: 1 x 60, 2 x 90, 1 x 1 20, 2 x 1 50, 1 x 240 mm
Fig. 1:
24 insert walls,
Fig. 2:
5 compartment rails, 18
compartment partitions
Fig. 3:
5 compartment rails, 6
compartment partitions
Fig. 4:
1 compartment rail, 5
compartment partitions
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
165303 Chest of drawers mod. 200 1020 x 1015 x
700
1
Accessories available PU
165305 Drawer inserts set contains: 1
Fig. 1: Insert for drawer 60 mm 1
Fig. 2: Insert for drawer 90 mm 1
Fig. 3: Insert for drawer 90 mm and 120 mm 2
Fig. 4: Insert for drawer 150 mm 2
V1.7.6.5/IN
T_P_
WA
140/1/11-10-07/#767914[60974]
15.35
Tool cabinets and storage cabinets
Cupboards with double-wing doors
Cabinets with double doors/ Cabinets withdouble doors for placement on counters
Application
• Safe keeping of tools and various materials
Properties
Max. cabinet load 300 kg, max. floor load 50 kg. Floors are
height adjustable in increments of 30 mm, ergonomic handle.
cabinet with double doors: 4 shelves, height 330 mm,
universally adjustable. Cabinet with double-wing doors for
placement on counters: with 2 universally adjustable shelves.
Unicolored: light gray RAL 7035
Bicolored: casing light gray RAL 7035, doors distant blue RAL
5023 Cabinet with double doors
Cabinet with double doors
Article
No.
Article
Designation
Color W x H x D
mm
Shelves PU
Piece
165321 Cabinets with double doors grey 1950 x 890 x 415 Nickle plated 1
165319 Cabinets with double doors grey 1950 x 890 x 415 painted 1
165323 Cabinets with double doors grey / blue 1950 x 890 x 415 zinc plated 1
165320 Cabinets with double doors for placement on
counters
grey 1020 x 890 x 415 zinc plated 1
165322 Cabinets with double doors for placement on
counters
grey / blue 1020 x 890 x 415 zinc plated 1
V1.
7.6.
5/IN
T_P_
WA
140/
2/11
-10-
07/#
7678
50[6
1008
]
15.36
Tool cabinets and storage cabinets
Cabinet with double doors
Application
• Safekeeping of tools and various materials
Properties
Unicolored light gray RAL 7035 or bicolored, light gray casing,
with 4 zinc-plated shelves/floors, height-adjustable in
increments of 30 mm, max. load 800 kg, 3-bar safety locking,
locking bars are hidden from view, zinc-plated shelves
Article
No.
Article
Designation
Color W x H x D
mm
Shelves PU
Piece
165317 Cabinet with double doors grey 1950 x 990 x 535 zinc plated 1
165316 Cabinet with double doors grey / blue 1950 x 990 x 535 zinc plated 1
Insert shelf
Properties
Shelf/floor set including shelf support, contains
2 shelves/floors
Article
No.
Article
Designation
Length
mm
Width
mm
PU
Piece
165308 Insert shelf set, zinc-plated 890 415 1
165307 Zinc-plated shelf 990 535 1
V1.7.6.5/IN
T_P_
WA
140/2/11-10-07/#767850[61008]
15.37
Tool cabinets and storage cabinets
Steel Closets
Steel closets incl. stand, 2 compartments
Properties
Light gray RAL 7035, 2 compartments, compartment width
300 mm, rotating bar locking mechanism with anti-rotation
lock, doors with ventilation holes, incl. stand, clothes rail with
3 sliding hooks, continuous door reinforcement, removable
shelf, double towel hook, imprint for name tag
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
165315 Steel Closet incl. stand, 2 compartments 1750 x 600 x 500 1
Steel closets incl. stand, 3 compartments
Properties
Light gray RAL 7035, 3 compartments, compartment width
300 mm, rotating bar locking mechanism with anti-rotation
lock, doors with ventilation holes, incl. stand, clothes rail with 3
sliding hooks, continuous door reinforcement, removable shelf,
double towel hook, imprint for name tag
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
165314 Steel closet incl. stand, 3 compartments 1750 x 900 x 500 1
V1.
7.6.
5/IN
T_P_
WA
140/
3/11
-10-
07/#
7678
93[6
1186
]
15.38
Tool cabinets and storage cabinets
Rotating cylinder lock for steel wardrobes
Application
• For changing locks from rotating bar locks to rotating cylinder
locks, for self-mounting
Article
No.
Article
Designation
PU
Piece
165313 Rotating cylinder lock 1
V1.7.6.5/IN
T_P_
WA
140/3/11-10-07/#767893[61186]
15.39
Tool cabinets and storage cabinets
Boltless Shelving Unit
Plug-in shelves
Technical data
Max. shelf load: 110 kg
Max. bay load: 1.300 kg
Properties
Shelves are height-adjust able in increments of 30 mm, zinc-
plated design
Delivery amount
• Base area and extension area incl. 4 shelves
• Additional shelf in a 2-pack
Article
No.
Article
Designation
L x W x H
mm
PU
Piece
165301 Boltless Shelving Unit – base area 400 x 1060 x 1950 1
165298 Boltless Shelving Unit – base area 500 x 1060 x 1950 1
165300 Boltless Shelving Unit – Cultivable
area
400 x 1025 x 1950 1
165297 Boltless Shelving Unit – Cultivable
area
500 x 1025 x 1950 1
165299 Shelf 400 x 1000 x 30 1
165296 Shelf 500 x 1000 x 30 1
V1.
7.6.
5/IN
T_P_
WA
140/
4/11
-10-
07/#
7678
64[6
1240
]
15.40
Power supply
Extension Cables
"BKV Maxi" Extension Cable
Product advantages
• Triple splash-water-proof hanging coupling
• Heavy-duty neoprene rubber cable 220 V
• Resist ant against oil, gasoline and UV radiation
Technical data
Cable type: H 07 RN-F 3G 1.5
Note
• Approved for permanent outdoor use
• VDE-tested
Article
No.
Article
Designation
Cable length
m
PU
Piece
108102 "BKV Maxi" Extension Cable 10 1
"BKV Maxi" Extension Cable 16 A
Product advantages
• Triple splash-water-proof hanging coupling
• Heavy-duty neoprene rubber cable 220 V
• Resist ant against oil, gasoline and UV radiation
Technical data
Cable type: H 07 RN-F 5G 1.5
Note
• Approved for frequent outdoor use
• VDE tested
Article
No.
Article
Designation
Cable length
m
PU
Piece
108099 Extension cable “BVK-Power” 16 A20 20 1
"BKV Profi" Extension cable
Product advantages
• Splashwaterproof due to full-rubber cap and full-rubber plug
• Heavy-duty neoprene rubber cable 220 V
• Resist ant against oil, gasoline and UV radiation
Technical data
Cable type: H 07 RN-F 3G 1.5
Note
• Approved for frequent outdoor use
• VDE tested (German Association for Electrical, Electronic and
Information Technologies)
Article
No.
Article
Designation
Cable length
m
PU
Piece
108098 ''BKV-Profi'' Extension cable 20 1
V1.7.6.5/IN
T_P_
WA
110/1/11-10-10/#768233[40871]
15.41
Power supply
"BKV Universal" Extension cable
Product advantages
• Rubber cable
Technical data
Cable type: H 05 RR-F 3G 1.5
Note
• For use in dry rooms
• VDE tested (German Association for Electrical, Electronic and
Information Technologies)
Article
No.
Article
Designation
Cable length
m
PU
Piece
108100 "BKV Universal" Extension cable 20 1
''BKV-Light'' Extension cable
Product advantages
• PVC cable
Technical data
Cable type: H 05 VV-F 3G 1.5
Note
• For use in dry rooms
• VDE tested (German Association for Electrical, Electronic and
Information Technologies)
Article
No.
Article
Designation
Cable length
m
PU
Piece
108101 ''BKV-Light'' Extension cable 25 1
V1.
7.6.
5/IN
T_P_
WA
110/
1/11
-10-
10/#
7682
33[4
0871
]
15.42
Power supply
Socket Distributors
"Maxi" 1 Socket Distributor
Product advantages
• If required, the carrying handles be screwed off (e.g. for wall
mounting)
• The carrying handles protect the integrated sockets and
serve as cable windings
• Connection socket: CEE 5 x 16 A with 2.5 m neoprene cable
• Integrated socket: 4 x 16 A Schuko and 2 x 16 A CEE
• TÜV (German Association for Technical Inspection) and GS
(Safety Tested) tested
Technical data
Protection class: IP 43
Maximum load capacity: 5.5 kW
Dimensions W x H x D: 480 x 130 x 260 mm
Weight: 2.6 kg
Processing notes
• Can be used for transportation, hanging or for wall mounting
Article
No.
Article
Designation
PU
Piece
050366 "Maxi" 1 Socket Distributor 1
"Safety" Socket Distributor
Application
• Use after construction current distributors on construction
sites
Product advantages
• Full rubber casing guarantees lightness, resistance against
impact, corrosion and electrical safety
• Connection socket: CEE-plug 5-pole, 400 V/32 A
• Integrated sockets: 1 x 32 A CEE, 2 x 16 A CEE, 3 x Schuko
16 A
• Earth leakage protection switch 25/0.03 A
Technical data
Protection class: IP 43
Power: 20 kW
Dimensions W x H x D:: 240 x 190 x 200 mm
Weight: 6.3 kg
Properties
With (The Construction Industry Institution for Statutory
Accident Insurance and Prevention) 30 mA for the safety
sockets, BG approval/GS tested (Safety Tested)
Processing notes
• With practical carrying handle
Article
No.
Article
Designation
PU
Piece
115421 "Safety" Socket Distributor 1
V1.7.6.5/IN
T_P_
WA
110/2/11-10-10/#768241[62927]
15.43
Power supply
Cable Drums/ Cable winders
"Light" Cable Drum
Product advantages
• 4 x VDE tested (German Association for Electrical, Electronic
and Information Technologies) safety sockets for 230 V
• Built-in switch-off function for thermal protection prevents
overheating
• Highly effective brake and low-lying center of gravity
guarantee stability
• Break-proof special plastic with 40 m PVC cable
• TÜV(German Association for Technical Inspection)/GS (Safety
Tested)
• Ergonomic handle with slip-proof plastic coating
• With cable fixing
Technical data
Max. power capacity: 3500 W
Cable type: H 05 VV-F 3G 1.5
Weight: 6 kg
Protection: IP 20
Note
• For use in dry rooms only
• Can be used standing up or lying flat
Article
No.
Article
Designation
PU
Piece
041605 "Light" Cable Drum 40 m 1
Spares PU
051246 Thermal circuit breaker 1
V1.
7.6.
5/IN
T_P_
WA
110/
3/11
-11-
24/#
7680
93[6
3014
]
15.44
Power supply
"Universal" Cable Drum
Product advantages
• 4 x VDE tested (German Association for Electrical, Electronic
and Information Technologies) safety sockets for 230 V
• Built-in switch-off function for thermal protection prevents
overheating
• Highly effective brake and low-lying center of gravity
guarantee stability
• Break-proof special plastic material with 40m or 25m rubber
cable
• Ergonomic handle with slip-proof plastic coating
• TÜV (German Association for Technical Inspection) /GS
(Safety tested)
• With cable fixing
Technical data
Max. power consumption: 3500 W
Cable type: H 05 RR-F 3G 1.5
Weight: 7.4 kg or 4.8 kg
Protection: IP 20
Note
• For use in dry rooms only
• Can be used standing up or lying flat
Article
No.
Article
Designation
PU
Piece
042616 "Universal" Cable Drum 25 m 1
041606 "Universal" Cable Drum 40 m 1
Scope of supply Amount
051246 Thermal circuit breaker
V1.7.6.5/IN
T_P_
WA
110/3/11-11-24/#768093[63014]
15.45
Power supply
"Profi 3" Cable Drum
Application
• Permitted for frequent outdoor use
Product advantages
• 3 VDE (German Association for Electrical, Electronic and
Information Technologies) tested safety sockets 230 V
• A special rubber sealing ring ensures that, even when
plugged in intrusion of water is prevented
• Built-in switch-off function for thermal protection prevents
over-heating
• High effective brake guarantees stability
• Break-safe special plastic
• 40 or 25 m heavy neoprene rubber cable guarantees
resistance against oil, benzin and UV radiation
• Ergonomic handle with slipeproof plastic profile
• TÜV(German Association for Technical Inspection)/GS (Safety
tested)
• With cable fixing
• With diagnosis system:
Green light - Power supply is active. The cable drum is ready
for use. If the connected machine does not work, there is a
fault with the connection or with the machine itself.
Red light - Connected and switched on machine does not
work because the the thermal protection switch is active. As
soon as the cable drum has cooled down and the the thermal
protection switch is pushed, the cable drum is ready for use.
• If both lights are off- The cable drum has no power
connection. It is not connected or the power socket is defect.
A specialist is required for repair.
Technical data
Max. power capacity: 3500 W
Cable type: H 07 RN-F 3G 1.5
Weight: 8 kg bzw. 5.2 kg
Protection class: IP 44
Properties
Self closing splash water protection cover according to VDE
(German Association for Electrical, Electronic and Information
Technologies), impact-proof full rubber plug
Article
No.
Article
Designation
PU
Piece
050367 "Profi 3" Cable Drum 25 m 1
050368 "Profi 3" Cable Drum 40 m 1
Spares PU
051246 Thermal circuit breaker 1
V1.
7.6.
5/IN
T_P_
WA
110/
3/11
-11-
24/#
7680
93[6
3014
]
15.46
Power supply
"Power" Cable Drum
Application
• Permitted for frequent outdoor use
Product advantages
• 2 VDE (German Association for Electrical, Electronic and
Information Technologies) tested safety sockets 220 V, 1 CEE
socket 380 V/16 A
• 3-pole built-in switch-off function for thermal protection
prevents over-heating
• Robust 3-phase current cable drum made of break-proof
special plastic
• 25 m heavy neoprene rubber cable guarantees resistance
against oil, benzine and UV radiation
• CEE socket 380 V/16 A
• TÜV (German Association for Technical Inspection) /GS
(Safety tested)
• With cable fixation
Technical data
Cable type: H 07 RN-F 5G 1.5
Weight: 8 kg
Protection class: IP 44
Properties
Self closing splash water protection cover according to VDE
(German Association for Electrical, Electronic and Information
Technologies)
Article
No.
Article
Designation
PU
Piece
041608 "Power" Cable Drum 25 m 1
"Special" Cable Drum
Application
• Approved for frequent outdoor use
Product advantages
• 3 phase version
• 3 sockets, 1 CEE version 400 V/5 x 32 A and 2 earthed wall
sockets 250 V/16 A
• 1 Plug CEE version 400 V/5 x 32 A
• Self locking splash water protection cover
• 3-Pole switch-off function for thermal protection
• Turn button at the carrying handle serves as locking brake
• Foldable turn handle
Technical data
power capacity when unwound: 5500 W
power capacity when wound up: 3500 W
Cable type: H 07 RN-F 5G 2.5
Weight: 12.5 kg
Protection class: IP 44
Article
No.
Article
Designation
PU
Piece
043772 Cable Reel "Special" 25 m 1
V1.7.6.5/IN
T_P_
WA
110/3/11-11-24/#768093[63014]
15.47
Power supply
"Mini"Cable Drum
Product advantages
• 4 x VDE tested (German Association for Electrical, Electronic
and Information Technologies) safety sockets
• Easy to wind and unwind
• Built-in switch-off function for thermal protection prevents
overheating
• Break-proof special plastic with 10 m PVC cable
• TÜV (German Association for Technical Inspection)
GS (Safety tested)
Technical data
Max. load: 3500 W
Cable type: H 05 VV-F 3G 1,5
Weight: 1,9 kg
Protection: IP 20
Note
• For use in dry rooms only
Article
No.
Article
Designation
PU
Piece
041607 "Mini"Cable Drum 10 m 1
"Automatic" Cable winder
Product advantages
• Automatic cable winder
• Casing made of shock-proof plastic
• Overload protection
Technical data
Cable type: H 05 VV-F 3G 1.5
Cable length: 10 meter
Color: black
Power, when wound-up: 800 Watt
Power, when unwound: 2000 Watt
Protection class: IP 20
Properties
Pivotable metal support for wall-mounting or ceiling-mounting,
automatic locking feature that can be switched off, TÜV/GS-
tested
Article
No.
Article
Designation
PU
Piece
770248 "Automatic" Cable winder 10 m 1
V1.
7.6.
5/IN
T_P_
WA
110/
3/11
-11-
24/#
7680
93[6
3014
]
15.48
Workshop trolleys
Workshop Cart Revolution
Workshop Trolley Revolution
Product advantages
• Enormous provision of space due to space outer dimensions
of 1075 x 955 x 540 mm resp. drawer inner dimensions of
688 x 398 mm. Product provides large amount of space for
your tools.
• Extra large working area (850 x 535 mm) with 10 round hole
recesses (Ø 17 mm) and a long hole recess (100 x 17 mm)
for the storage of screwdrivers, extensions etc.
• Can be locked and thus secures your tools against robbery
• Central lock with folding key (reduces risk of injury) as well as
spare key
• Side walls and back wall complete with square hole grid
• For the inclusion of tool hooks and attachments for individual
configuration
• Possible dynamic total load up to 600 kg distributed on the
base plate
• Back-friendly working height of 1.08 m
• Plastic parts have high impact resistance, very good scratch
resistance and excellent chemical resistance (e.g. against
oils, benzine, thinner, brake fluid) for a long service life
• Surrounding impact protection both above and below
prevents damage due to bumps
• Ball beared, easy running wheels (2 steering wheels with
brakes and 2 stiff wheels)
• Soft touch handle made of 2 component material, maximum
loadability when pulled, pressure and when pressure is
applied and with impact
• Ball beared drawer telescope extendable by 100% and with
individual locking, thus no unwanted opening, e.g. during
operation
• Absolute resistance to tilting due to anti-tilt block on both
sides of the drawers, only one drawer can be moved out
each time
• Loading capacity per drawer 35 kg
• Dirt protected, replaceable labelling ledges for quick content
overview of the drawers
• Accessories : Separating sheets enable individual drawer
arrangement
• Individual color selection of the casing in blue (RAL 5002),
red (RAL 3020) and silver-gray (9006) with a selection of 7 or
8 drawers. With purchase quantities from 5 trolleys also
available in the colors blue (RAL 5003), yellow (RAL 1033),
green (RAL 6007) and gray (RAL 7035) (note on additional
color costs)
• 5 year guarantee (wearing parts as well as inappropriate
operation excluded)
• Comprehensive tool inlets, small part inlets, add-on parts and
equipment program
V1.7.6.5/IN
T_P_
WA
130/1/12-08-17/#768532[158731]
15.49
Workshop trolleys
Article
No.
Article
Designation
PU
Piece
034209 Workshop trolley “Revolution” blue with 7 drawers 1
034210 Workshop trolley “Revolution” red with 7 drawers 1
034222 Workshop trolley “Revolution” silver gray with 7 drawers 1
034223 Workshop trolley “Revolution” blue with 8 drawers 1
034224 Workshop trolley “Revolution” red with 8 drawers 1
034225 Workshop trolley “Revolution” silver gray with 8 drawers 1
049338 Workshop trolley “Revolution” green with 8 drawers 1
Workshop trolley “Revolution”, extensionparts
Technical data
Dimensions of tool/ system box wall: 808 x 494 mm
Dimensions of Multiplex Wooden Worktop: 230 x 405 x25 mm
Dimensions of large wooden worktop: 305 x 405 x 25 mm
Max. load of vice holder:: 10 kg
Dimension load of vice holder:: 288 x 450 x 250 mm
Max. loads of laptop holder: 7 kg
Dimensions: 400 x 300 x approx. 200 mm
Tool / System Box Wall (without
content)
Wooden Worktop and Windscreen
Holder Set
Holder 6/60 (2x) for
Cable Dispenser
(without content)
Sander Material Dispenser,
Holder 9/60 for Torque
Wrench (without content)
Bench Vice Holder, Wooden Worktop
and Laptop Holder (without content)
Article
No.
Article
Designation
PU
Piece
037549 Multiplex wooden worktop 1
037571 Empty tool/system box wall 1
051247 Multiplex Large Wooden Worktop 1
051248 Laptop Holder 1
051249 Table 1
148977 Paper container 1
148978 Chemical Can Holder 1
148979 Cleaning cloth holder 1
004485 Cable Dispenser MOD 28
019782 Single Slider Paper Dispenser, MOD 22
019783 3-fold Abrasive Cloth Unwinder, MOD 23
195170 Holder 9/60 1
198960 Holder 6/60 1
037570 Windscreen holder set (4-part) 1
V1.
7.6.
5/IN
T_P_
WA
130/
1/12
-08-
17/#
7685
32[1
5873
1]
15.50
Workshop trolleys
Revolution Top-Mounted /Tool Cabinet
Application
• Can be used as a top-mounted cabinet for the Revolution
workshop trolley or as a separate tool cabinet
Product advantages
• Enormous space provision with outer dimensions of 360 x
830 mm drawer inner dimensions of 688 x 398 mm it
provides a large amount of space for your tools
• Lockable thus secures your tools against robbery. Lock with
folding (reduces the risk of injury) as well as spare key
• Side walls and back wall completely with square hole grid for
the inclusion of tool hooks and add-on pieces for individual
configuration
• Plastic parts provide high impact resistance, very good
scratch resistance and excellent chemical resistance (e.g.
against oils, benzine, solvents, brake fluids) for a long service
life beared drawer telescope extendable by100% and with
individual locking per drawer, thus no unwanted opening, e.g.
during drive
• Absolute resistance to tilting due to anti-tilt block on both
sides of the drawers, only one drawer can be moved out
each time
• Loading capacity per drawer 35 kg
• Dirt protected, replaceable labelling ledges for quick content
overview of the drawers
• Accessories: Separating sheets enable individual drawer
arrangement
• Comprehensive tool inlets, small part inlets, add-on parts and
equipment program
Delivery amount
• 2 carrying handles
• Ruppled rubber surface
• Screwing set for workshop cart "Revolution"
Article
No.
Article
Designation
PU
Piece
046624 Revolution Top-Mounted /Tool Cabinet blue 1
V1.7.6.5/IN
T_P_
WA
130/1/12-08-17/#768532[158731]
15.51
Workshop trolleys
Replacement Parts for Revolution WorkshopCart
Note
• Lateral divider U-Profile for optimal fixation of tool inlets
Article
No.
Article
Designation
Length
mm
PU
Piece
039036 Length divider 396 1
039034 Lateral divider 686 1
041575 Lateral divider U-Profile 686 1
039033 Stiff Fixed Roller - 1
039031 Central Lock with Key - 1
039030 Drawer Rail Pair - 1
039032 Steering Roll with Brake - 1
Replacement Parts for Workshop Trolleycompact 8250
Article
No.
Article
Designation
PU
Piece
103463 8250-11 Telescope Rail Pair 1
113620 8250-3 Steering Wheel with Brake 1
113638 8250-4 Stiff Wheel 1
113670 8250-2 Steering Wheel without Brake 1
158186 8250-1 Rubber Layer 1
V1.
7.6.
5/IN
T_P_
WA
130/
1/12
-08-
17/#
7685
32[1
5873
1]
15.52
Workshop trolleys
"Evolution" Workshop Cart and toolboxes
"Evolution" Workshop Cart
Application
• The workshop cart offers excellent transportation of tools
and machinery in workshops
Product advantages
• Drawers can be pulled out completely (100%)
• Deepened perforated walls on both sides and at the rear for
mounting various accessories
• Locking of the drawers prevents the unintended opening of
the drawers in their closed position
• Drawer rails on ball bearings
• Central locking secures all drawers
Technical data
Weight: 59 kg
Maximum load Static: 500 kg
Dynamic: 300 kg
Drawer size: 569 x 339 mm
Drawer height: 6 x 75 mm, 1 x 150 mm
Max. drawer load: 35 kg
Wheels: Ø 125 mm, full-rubber tyres
Blue body: RAL 5003
Red body: RAL 3020
Light gray body: RAL 7035
Green body: RAL 6018 or 6016
Properties
2 lockable steering castors; stable tube push handle and
rippled rubber surface (not mounted when delivered); for
delivery purposes all wheels are mounted; individual drawers
can be locked – unlockable via a click rail
Processing notes
• Can be fitted with suitable plastic inserts for tools
• Can be fitted with BERA sets
Delivery amount
• Partition sheets (x 10) for establishing drawer compartments
as well as 1 storage compartment
Article
No.
Article
Designation
Color W x H x D
mm
PU
Piece
164364 Workshop trolley „Evolution“ 3 blue RAL 5003 blue 880 x 700 x 470 1
047799 Workshop trolley "Evolution" 3 green RAL 6018 green 880 x 700 x 470 1
052069 Workshop trolley "Evolution" 3 green RAL 6016 green 880 x 700 x 470 1
003120 Workshop trolley "Evolution" 3 gray RAL 7035 grey 880 x 700 x 470 1
164363 Workshop trolley „Evolution“ 3 red RAL 3020 red 880 x 700 x 470 1
V1.7.6.5/IN
T_P_
WA
130/2/11-10-10/#768539[61166]
15.53
Workshop trolleys
Tool Box for Workshop Trolley „Evolution“
Product advantages
• Drawers can be pulled out completely (100%)
• Deepened perforated walls on the side and on the back wall
for the attachment of several equipment parts
• Locking of the drawers arrest prevents unintended opening
of the drawers in their closed position
• Drawer rails on ball bearings
• Central locking secures all drawers
• Optimal for an enhancement of the workshop cart through 3
more drawers
Technical data
Weight: 20 kg
Drawer size: 569 x 339 mm
Drawer height: 3 x 75 mm
Drawer load: 35 kg
Blue body: RAL 5003
Gray body: RAL 7035
Red body: RAL 3020
Properties
Individual drawers can be locked- unlockable via a click rail
Processing notes
• Can be fitted with suitable plastic inlets for tools
• Can be fitted with Bera sets
Delivery amount
• Includes partition sheets for establishing drawer
compartments as well as 1 storage compartment
• Delivery includes plastic cover
Article
No.
Article
Designation
Color W x B x D
mm
PU
Piece
010156 Tool Box for Workshop Cart Evolution blue 410 x 700 x 470 1
010953 Tool Box for Workshop Cart Evolution red 410 x 700 x 470 1
055243 Tool Box for Workshop Cart Evolution grey 410 x 700 x 470 1
V1.
7.6.
5/IN
T_P_
WA
130/
2/11
-10-
10/#
7685
39[6
1166
]
15.54
Workshop trolleys
Fully fitted "Evolution" workshop cart
Workshop trolley “Evolution”, fully fitted
Properties
Ready-made toolset, 4 drawers completely fitted out, high-
quality tools, individually extendable
Socket wrench
set 1/4” with
insert Socket wrench
set 1/2” with
insert
Screwdriver
set “Evolution”
with insert
Pliers set CPI
with insert,
drawer 2
Ring spanner
set 101K with
insert, drawer 2
Balancing
Double ring
spanner set
with insert
Double ring
spanner set
with insert
Balancing
compartment
Hammer tool
set with insert
Balancing
compartment
Insert, 6-fold,
long
Article
No.
Article
Designation
PU
Piece
149309 Workshop cart "Evolution", blue, incl. toolset
149310 Workshop cart "Evolution", red, incl. toolset
175566 Individual toolsets for workshop cart 1
V1.7.6.5/IN
T_P_
WA
130/3/11-10-10/#768550[88694]
15.55
Workshop trolleys
"Evolution" for electricians
"Evolution" workshop cart for electricians
Application
• Tool set that has been specifically produced for car
electricians
Main user
Car repair shops, automotive engineering
Properties
All materials and tools are laid out in a practical manner and are
easy to find. Everything is readily available for mobile use and
can be individually extended
Processing notes
• One roll of anti-slip mat of 61 x 122 cm is provided for lining
the drawers
Drawer 1 Drawer 2 Drawer 3 Drawer 4
Chemicals can
holder
Cable un-
winder
Article
No.
Article
Designation
PU
Piece
153360 "Evolution" workshop cart for electricians Blue 1
Scope of supply Amount
124503 Anti-Slip Mat 61x122 cm 1
120939 Dismantling Knife 4-28H 1
003555 VDE Pliers Set with a 2-Component Soft Grip 1
141732 Plastic Inlet with Screwdriver Set, VDE, Slotted and Phillips
Head 7-piece
1
163354 Key Lock-Set 1/4" 31 pcs. 1
187739 Cable Connector Pliers 601 1
001397 Connector Pliers 153 1
724351 Cable Connector Pliers 602 1
012998 Insulation Stripper Super 5 1
058714 Pocket Torch with Lighter 1
146272 Pliers for Glass Socket Bulbs 1
117548 BERA-Assortment 3050 Cable Straps Refill Assortment 1
130657 Ferrule 1
774723 Ferrule 1
108039 Multi-Purpose Tape 10 m 1
146101 Insulated Connector 1
117537 Assortment 1
049600 PVC Electrical Insulation Tape 10
715972 Car Check Voltage Tester 3-48 V 1
250000 Multimeter Testing Device 1
148978 Chemical Can Holder 1
104261 Contact Spray 2
037201 ORA-20117: Product is not released. 2
038525 Electronics Spray 2
370371 Cable Unwinder Set 5-fold 1
V1.
7.6.
5/IN
T_P_
WA
130/
4/12
-08-
17/#
7682
68[6
0781
]
15.56
Workshop trolleys
Accessories and replacement parts for WorkshopCarts
Accessories and replacement parts for the"Evolution" workshop cart
Article
No.
Article
Designation
PU
Piece
149301 Fixed castor 1
149246 Partition sheet 100 mm 5
149245 Partition sheet 50 mm 10
013411 Replacement lock 1
060116 Rippled rubber surface 1
149300 Steering castor 1
045106 Telescope Rail Pair, Ball Beared as of 04/07 1
169630 Telescope rails, pair, plug-in, manufactured from 04/02
149302 Telescope rails, pair, riveted on the drawer side 1
Plastic cover for “Evolution”
Properties
Made from ABS, color black, with numerous options for storing
small parts, tools and chemicals spray cans
Article
No.
Article
Designation
PU
Piece
148975 Plastic cover 1
Ergonomic handle for “Evolution”
Properties
With supports for screwdrivers and 1 cavity for small parts,
color anthracite
Article
No.
Article
Designation
PU
Piece
148976 Ergonomic handle 1
V1.7.6.5/IN
T_P_
WA
130/5/11-11-24/#768517[62763]
15.57
Workshop trolleys
Paper Container for Evolution andRevolution
Properties
Color anthracite, 302 x 302 x 150 mm
Article
No.
Article
Designation
PU
Piece
148977 Paper container 1
Cleaning Cloth Holder, Variable for Evolutionand Revolution
Product advantages
• Adjustable in width from 260 to 390 mm, thus suitable for all
cleaning cloth rolls
Properties
For the insertion of cleaning cloth rolls, color anthracite
Article
No.
Article
Designation
PU
Piece
043602 Cleaning Cloth Holder variable 1
Cleaning Cloth Holder for Evolution andRevolution
Properties
For storing a cleaning cloth roll, color anthracite
Note
• Max. Cleaning cloth holder width 29 cm
Article
No.
Article
Designation
PU
Piece
148979 Cleaning cloth holder 1
Chemical Can Holder for Evolution andRevolution
Technical data
Dimensions: 100 x 302 x 161 mm
Properties
With carrying handle, for storing 8 spray cans, color anthracite
Article
No.
Article
Designation
PU
Piece
148978 Chemical Can Holder 1
V1.
7.6.
5/IN
T_P_
WA
130/
5/11
-11-
24/#
7685
17[6
2763
]
15.58
Workshop trolleys
Small Storage Compartment for Evolutionand Revolution
Properties
Color anthracite
Article
No.
Article
Designation
PU
Piece
157336 Small Storage Compartment for Evolution and Revolution 1
Laptop Holder for Evolution and Revolution
Technical data
Dimensions W x D x H: 400 x 300 x approx. 200 mm
Inclination: 15°
Load: max. 7 kg
Properties
Suitable as tray or writing board, has the ability to swivel
Note
• Includes mounting material and adapter for attachment to the
Evolution workshop cart
Article
No.
Article
Designation
PU
Piece
051248 Laptop Holder 1
V1.7.6.5/IN
T_P_
WA
130/5/11-11-24/#768517[62763]
15.59
Workshop trolleys
Foam Inlets for Socket Wrench Sets; Part 1Product advantages
• Each tool is stored securely and in its place
• Missing tools are detectable immediately the 2 layered,
black-blue order system
• The inlets are as chemical resistant as possible (against many
oils, solutions and acids), humidity resistant, form
dimensionally and durable
• All inlets, which are marked with a pencil, are delivered with
a permanent, non-scratchable laser labelling per tool
compartment. The necessary tool or even missing parts can
thus be identified immediately
Hard Foam Inlet with 1/4" Socket WrenchSet incl. Flex Ratchet Handle
Delivery amount
• 1/4" socket wrench insert in each of the wrench sizes 4 - 4.5 -
5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• 1 x Flex ratchet handle, fine toothed
• 1 x Bit-Adapter
• 1 x Hand Screwdriver with 1/4", square
• 1 x T-shaped sliding handle
• 2 x Extensions 55 and 100 mm
• 1 x Cardan Joint
• 1 x 1/4" screwdriver insert: Phillips-type screwdriver size 1, 2,
3; longitudinal slit 4 - 6 - 7 mm; allen key in each of the
wrench sizes WS 3 - 4 - 5 - 6 - 8 mm; TX 15, TX 20, TX 25, TX
30
for
Evolution
for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048689 Hard Foam Inlet with 1/4" Socket
Wrench Set incl. Flex Ratchet Handle
33 x 110 x 337 1
048110 Empty Hard Foam Inlet for 1/4 " Socket
Wrench Set
33 x 110 x 337 1
Hard Foam Inlet with 1/4" Socket WrenchSet
Delivery amount
• 1 x 1/4" socket wrench insert in each of the wrench sizesWS
4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• 1 x Lever flex ratchet handle, fine toothed
• 1 x Bit-Adapter
• 1 x Handheld screwdriver with 1/4", square
• 1 x T-shaped sliding handle
• 2 x Extensions 55 and 100 mm
• 1 x Cardan Joint
• 1 x 1/4" screwdriver insert:: Phillips-type size 1, 2, 3;
logitudinal slit 4 - 6 - 7 mm; allen key in each of the wrench
sizes 3 - 4 - 5 - 6 - 8 mm; TX 15, TX 20, TX 25, TX 30
for
Evolution
for Revolution
With laser
labellingArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
034579 Hard Foam Inlet with Socket Wrench Set
1/4"
33 x 110 x 337 1
048110 Empty Hard Foam Inlet for 1/4 " Socket
Wrench Set
33 x 110 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
6/11
-10-
10/#
7685
53[3
8435
7]
15.60
Workshop trolleys
Hard Foam Inlet with 1/4" I-Socket incl.Flex Ratchet Handle
Delivery amount
• 1 x 1/4" socket wrench insert in each of the wrench sizes WS
4 - 4.5 - 5 - 5.5 - 6 - 7 -8 - 9 - 10 - 11 - 12 - 13 - 14 mm
• 1 x flex ratchet handle, fine toothed
• 1 x Hand Screwdrivers
• 2 x Extensions 50 and 100 mm
• 1 x T-shaped sliding handle
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048688 Hard Foam Inlet 1/4 " I-Socket incl. Lever
Flex Ratchet Handle
33 x 110 x 337 1
048111 Empty Hard Foam Inlet for 1/4" I-Socket-
Set 33 x 110 x 337
33 x 110 x 337 1
Hard Foam Inlet with 1/4" I-Socket
Delivery amount
• 1 x 1/4" socket wrench insert in each of the wrench sizes WS
4 - 4.5 - 5 - 5.5 - 6 - 7 -8 - 9 - 10 - 11 - 12 - 13 - 14 mm
• 1 x flex ratchet handle, fine toothed
• 1 x Hand Screwdrivers
• 2 x Extensions 50 and 100 mm
• 1 x T-shaped sliding handle
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039694 Hard Foam 1/4" Inlet I-Socket 33 x 110 x 337 1
048111 Empty Hard Foam Inlet for 1/4" I-Socket-
Set 33 x 110 x 337
33 x 110 x 337 1
Hard Foam Inlet with 3/8" Socket WrenchSet incl. Flex Ratchet Handle
Delivery amount
• 1 x 3/8" socket wrench insert in each of the wrench sizes WS
6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 -16 - 17 - 18 - 19 - 20 -
21 - 22 mm
• 1 x Flex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x Extensions 125 and 250 mm
• 1 x Cardan Joint
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048687 Hard Foam Inlet with Socket Wrench Set 33 x 228 x 337 1
048112 Empty Hard Foam Inlet for 3/8" Socket
Wrench Set
33 x 228 x 337 1 V1.7.6.5/IN
T_P_
WA
130/6/11-10-10/#768553[384357]
15.61
Workshop trolleys
Hard Foam Inlet with 3/8" Socket WrenchSet with socket wrench set
Delivery amount
• 1 x 3/8” socket wrench insert in each of the wrench sizes 6 -
7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 -16 - 17 - 18 - 19 - 20 - 21 -
22 mm
• 1 x reversible ratchet, fine increments
• 1 x T-shaped sliding handle
• 2 x extensions 125 and 250 mm
• 1 x cardan joint
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
H x B x T
mm
PU
Piece
034578 Hard foam insert with 3/8” socket
wrench set
33 x 228 x 337 1
048112 Empty Hard Foam Inlet for 3/8" Socket
Wrench Set
33 x 228 x 337 1
Hard Foam Inlet with 1/4" and 1/2" SocketWrench Set Premium BFD Profile
Delivery amount
• 1/4 " wrench inserts: 12 x BFD, 7 x BFD deep, 5 x for outer
TX screws, 4 x for hexagon socket screws, 4 x slotted, 3 x
Phillips PH, 3 x Phillips PZ, 8 x for inner TX screws, 8 x for
inner TX head hole screws
• Each 1 x 1/4" extension 50 mm, 1/4" extension 100 mm, 1/4"
T-shaped sliding handle, 1/4 " universal joint, 1/4" handheld
screwdriver, 1/4 " flex ratchet handle, 1/2 " flex ratchet handle
• 1/2 " socket wrench inserts: 14 x BFD, 10 x BFD deep, 2x
spark plug inserts
• 1 x 1/2" extension 125 mm, 1/2" extension 250 mm, 3/8"
enlargement/gliding piece, 1/2", 1/2" cardan joint , 1/2" bit
adapter for 10 mm bits
• 1/4" bits: 2x PH, 2x PZ, 2x LS
• 10 mm bits: 6 x for hexagon socket screws, 3 x slotted, 2 x
Phillips PH, 6 x for inner TX screws, 6 x for inner TX head
hole screws, 5 x for multi tooth screws
• 6 x allen wrench for hexagon socket screws, adapter ratchet
screwdriver
• 1 x ratchet screwdriver, adapter for ratchet screwdriver for
1/4" bits, adapter for ratchet screwdriver for 1/4" socket
wrench inserts
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
057069 Hard Foam Insert with Socket Wrench
Set Premium BFD
33 x 566 x 337 1
057067 Empty Hard Foam inlet for Socket
Wrench set
33 x 566 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
6/11
-10-
10/#
7685
53[3
8435
7]
15.62
Workshop trolleys
Hard Foam Inlet with 1/2" Socket WrenchSet incl. Flex Ratchet Handle
Delivery amount
• 1 x 1/2" socket wrench insert in each of the wrench sizes WS
10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 -
24 - 26 - 27 - 28 - 30 -32 mm
• 1 x Fex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x Extensions 125 and 250 mm
• 1 x Cardan Joint
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048686 Hard Foam Inlet with 1/2" Socket
Wrench Set incl. Flex Ratchet Handle
33 x 228 x 337 1
048113 Empty Hard Foam Inlet for 1/2 " Socket
Wrench Set
33 x 228 x 337 1
Hard Foam Inlet with 1/2" Socket WrenchSet
Delivery amount
• 1 x 1/2" socket wrench insert in each of the wrench sizes WS
10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 -
24 - 26 - 27 - 28 - 30 -32 mm
• 1 x Fex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x Extensions 125 and 250 mm
• 1 x Cardan Joint
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
034577 Hard Foam Inlet with Socket Wrench Set
1/2"
33 x 228 x 337 1
048113 Empty Hard Foam Inlet for 1/2 " Socket
Wrench Set
33 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/6/11-10-10/#768553[384357]
15.63
Workshop trolleys
Hard Foam Inlet with 1/4" and 1/2" SocketWrench Set Premium I-Socket-Profile
Delivery amount
• 1/4" Socket wrench inserts: 12 x I-Socket, 7 x I-socket deep,
5 x for outer TX screws, 4 x for hexagon socket screws, 4 x
slotted, 3 x Phillips PH, 3x Phillips PZ, 8 x
for inner TX screws, 8 x for inner TX head hole screws
• Each 1 x 1/4" extension 50 mm, 1/4" extension 100 mm,
1/4" T-shaped sliding handle, 1/4" cardan joint, 1/4" handheld
screwdriver, 1/4" flex ratchet handle, 1/2" flex ratchet handle
• 1/2" socket wrench inserts: 14 x I-socket, 10 x I-socket deep,
2 x spark plug Insert
• 1 x 1/2" extension 125 mm, 1/2" extension 250 mm, 3/8"
enlargement/gliding piece on 1/2", 1/2" cardan joint, 1/2" bit
adapter for 10 mm bits
• 1/4" bit: 2 x PH, 2x PZ, 2x LS
• 10 mm bits: 6 x for hexagon socket screws, 3 x slotted, 2 x
Phillips PH, 6 x for inner TX screws, 6 x for inner TX-head hole
screws, 5 x for multi teeth screws
• 6 x allen wrench for hexagon socket screws
• 1 x ratchet screwdriver, adapter ratchet screwdriver for 1/4
" socket wrench inlets for 1/4"
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
057068 Hard Foam Inlet with Socket Wrench Set
Premium I- Socket
33 x 566 x 337 1
057067 Empty Hard Foam inlet for Socket
Wrench set
33 x 566 x 337 1
Hard Foam Inlet with 1/2" I-Socket incl.Flex Ratchet Handle
Delivery amount
• 1 x 1/2" flex ratchet handle, fine toothed
• 1 x Extension 125 mm
• 1 x Extension 250 mm with gliding head
• 1 x Cardan Joint
• 1 x1/2" socket wrench insert 10 - 11 - 12 - 13 - 14 - 15 - 16 -
17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 mm
• 1 x 1/2" Bit-Adapter
• 1 x 10 mm bit TX 20, TX 25, TX 27, TX 30, TX 40, TX 45, TX 50,
TX 55
• 1 x 10 mm bit allen 5 - 6 - 7 - 8 - 10 - 12 mm
• 1 x 10 mm bit multi teeth M 5, M 6, M 8, M 10, M 12
für Evolution für Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048690 Hard Foam Inlet with 1/2" I-Socket incl.
Flex Ratchet Handle
33 x 228 x 337 1
048114 Empty Hard Foam Inlet for 1/2" I-Socket-
Set 33 x 228 x 337
33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
6/11
-10-
10/#
7685
53[3
8435
7]
15.64
Workshop trolleys
Hard Foam Inlet with 1/2" I-Socket
Delivery amount
• 1 x 1/2” Berner ratchet
• 1 x extension 125 mm
• 1 x extension 250 mm with sliding head
• 1 x cardan joint
1 x 1/2” socket wrench insert in each of the sizes 10 - 11 -
12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 -
32 mm
• 1 x 1/2” x bit adapter
• 1 x TX 20, TX 25, TX 27, TX 30, TX 40, TX 45, TX 50, TX 55 each
• 1 x allen in each of the sizes 5 - 6 - 7 - 8 - 10 - 12 mm
• 1 x multi tooth in each of the sizes M 5, M 6, M 8, M 10, M
12
für Evolution für Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039723 Hard foam insert with 1/2” I-socket 33 x
228 x 337
33 x 228 x 337 1
048114 Empty Hard Foam Inlet for 1/2" I-Socket-
Set 33 x 228 x 337
33 x 228 x 337 1
Hard Foam Inlet with 3/4" Socket WrenchSet
Delivery amount
• 1 x 3/4" socket wrench insert in each of the wrench sizes WS
21 - 22 - 24 - 27 - 30 - 32 - 34 - 36 - 38 - 41 - 46 - 50 mm
• 1 x flex ratchet handle
• 1 x t-shaped sliding handle
• 2 x extensions 125 and 250 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
052682 Empty Hard Foam Insert for 3/4" Socket
Wrench Set
33 x 566 x 337 1
052809 Hard Foam Inlet with 3/4" Socket
Wrench Set
33 x 566 x 337 1
V1.7.6.5/IN
T_P_
WA
130/6/11-10-10/#768553[384357]
15.65
Workshop trolleys
Hard foam insert with Loop Ratchet
Delivery amount
• 1x loop ratchet insert in each of the wrench sizes 8 - 9 - 10 -
11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 mm
• 1x interchangeable loop ratchet
• 1 x extension in each of the sizes 75 mm, 150 mm
• 1 x 1/4” bit adapter
• 1 x 10 mm bit adapter
• 1 x adapter for 1/2” socket wrench inserts
• 1 x adapter for 1/4” socket wrench inserts
• 1 x 10 mm bit in each of the sizes: TX 20 - TX 25, TX 27, TX 30,
TX 40, TX 45, TX 50, TX 55
• 1 x 10 mm bit in each of the sizes: allen M 5, M 6, M 8, M
10, M 12
• 1 x 10 mm bit in each of the sizes: multi tooth M 5, M 6, M 7,
M 8, M 10, M 12 for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039717 Hard foam inlet with loop ratchet 33 x 228 x 337 1
039446 Empty Hard foam inlet for loop ratchet 33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
6/11
-10-
10/#
7685
53[3
8435
7]
15.66
Workshop trolleys
Foam Inlets for Socket Wrench Sets; Part 2Product advantages
• Each tool is stored securely and in its place
• Missing tools are detectable immediately by the 2 layered,
black-blue order system
• The inlets are as chemical resistant (against many oils,
solutions and acids), humidity resistant, as stable and durable
• All inlets, which are marked with a pencil, are delivered with
a permanent, non-scratchable laser labelling per tool
compartment. The necessary tool or even missing parts can
thus be identified immediately
Hard Foam Inlet with Extra Deep 1/2" Impact Socket Set
Delivery amount
• 1 x extra deep 1/2" impact socket insert, in each of the
wrench sizes, WS 13 - 15 - 16 - 18 - 21 - 22 - 24 - 27 - 30 - 32
mm
• 1 x 1/2" impact extension 125 mm
• 1 x 1/2" impact cardan joint
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043938 Hard Foam Inlet with Extra Deep 1/2
" Impact Socket Set
33 x 228 x 337 1
043555 Hard Foam Inlet for Extra Deep 1/2
Impact Socket Set
33 x 228 x 337 1
Hard Foam Inlet with 1/2" Impact HeavySocket
Delivery amount
• 1 x 1/2" impact socket wrench insert in each of the wrench
sizes plastic coated 17 - 19 - 21 mm
• 1 x 1/2" impact cardan joint 17 - 19 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043937 Hard Foam Inlet for 1/2" Impact Socket 33 x 110 x 337 1
043556 Empty Hard Foam Inlet for 1/2" Impact
Socket
33 x 110 x 337 1
V1.7.6.5/IN
T_P_
WA
130/7/12-08-17/#768618[725104]
15.67
Workshop trolleys
Hard Foam Inlets with Socket, Inner TX 1/2" Short and Long
Delivery amount
• Short Design:
TX20 - TX25 - TX27 - TX30 - TX40 - TX45 - TX50 - TX55 - TX60
Long Design:
TX20 - TX25 - TX27 - TX30 - TX40 - TX45 - TX50 - TX55
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
116513 Empty Hard Foam Inlets with Socket, Inner-
TX 1/2" short and long
33 x 226 x 331 1
116507 Hard Foam Inlets with Socket, Inner TX 1/2
" Short and Long, 17-part
33 x 226 x 331 1
Hard Foam Inlet with Socket, Inner-TX 1/2" Short
Delivery amount
• 1 x TX socket wrench inserts: TX20 - TX25 - TX27 - TX30 -
TX40 - TX45 - TX50 - TX55 - TX60
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
116512 Empty Hard foam insert wit socket, Inner-TX
1/2" Short
33 x 113 x 331 1
Hard Foam Inlet with Multi Teeth 1/2" Socket Wrench Inserts
Delivery amount
• 1 x multi teeth socket wrench insert
• Length: 55 mm = wrench size 5 - 6 - 8 - 10 - 12 - 14 - 16
• Length: 100 mm = wrench size 8 - 10 - 12
• Length: 110 mm = wrench size 6 - 14
• Length: 120 mm = WS 10
• Length: 140 mm = WS 9 - 12
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
076001 Empty Hard Foam Inlet for 1/2" Multi
Teeth Socket Wrench Inserts
33 x 228 x 337 1
082561 Hard Foam Inlet with Multi Teeth 1/2
" Socket Wrench Inserts
33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
7/12
-08-
17/#
7686
18[7
2510
4]
15.68
Workshop trolleys
Hard Foam Inlet with Socket Wrench InsertsInner Hex 1/2"
Delivery amount
• 1 x socket wrench insert 1/2" hex in each of the wrench sizes
4 - 5 - 6 - 7 - 8 - 10 - 12 - 14 - 17 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039721 Hard Foam Inlet with Inner Hex 1/2
" Socket Wrench Inserts
33 x 110 x 337 1
039450 Empty Hard Foam Inlet for 1/2" Hex
Socket Wrench Inserts
33 x 110 x 337 1
Hard Foam Inlets with Long 3/8" and 1/2"Socket Wrench Inserts
Delivery amount
• 1 x 3/8" socket wrench insert in each of the wrench sizes 9 -
10 - 11 mm
1 x 1/2" socket wrench insert in each of the wrench sizes 12 -
13 - 14 - 15 - 16 - 17 - 18 - 19 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039719 Hard Foam Inlet with 3/8" and 1/2"
Socket Wrench Inserts
33 x 110 x 337 1
039449 Empty Hard Foam Inlet for Long Socket
Wrench Inserts
33 x 110 x 337 1
Hard Foam Inlet with TX 1/4”, 3/8”, 1/2”
Delivery amount
• 1 x internal TX in each of the following sizes: TX 20, TX 25, TX
27, TX 30, TX 40, TX 45, TX 50, TX 55, TX 60
• 1 x external TX in each of the following sizes: E 4, E 5, E 6, E
8, E 10, E 12, E 14, E 18, E 20, E 24
• Insert connector: 1/4” x 3/8”, 5/16” x 1/2”
• 1 x power insert bit 110 mm in each of the following sizes: TX
25, TX 40, TX 45, TX 55
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039720 Hard foam insert with TX 1/4”, 3/8”,1/2”
inserts
33 x 110 x 337 1
039456 Empty Hard Foam Inlet for TX 33 x 110 x
337
33 x 110 x 337 1 V1.7.6.5/IN
T_P_
WA
130/7/12-08-17/#768618[725104]
15.69
Workshop trolleys
Hard foam poach T-Turbo Set 1/4"
Delivery amount
• 1/4" I-Socket ratchet wrenches: Wrench size 4 / 4.5 / 5 / 5.5 /
6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14
• 1/4" Socket wrench insert, allen: Wrench size 3 / 4 / 5 / 6 / 7 /
8 / 10
• 1/4" Socket wrench insert Philips: PH 1 / 2 / 3
• 1/4" inner TX socket wrench insert: TX 10 / 15 /20 / 25 / 27 /
30
• High quality bit 1/4": LS 4.5 x 0,6 / 5.5 x 0.8 / 6.5 x 1.2
• T-Turbo handle 1/4" - 1/4" bit adapter – 1/4" cardan joint
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
080665 Hard Foam Inlet T-Turbo Set 1/4" 33 x 228 x 337 1
Hard Foam Inlet with 1/4" Bit- and SocketWrench Inserts (60 units)
Delivery amount
• 1 x 1/4" socket wrench insert:
socket wrench: 3 - 4 - 5 - 6 mm
LS: 4 - 5.5 - 6.5 - 7 mm
PH + PZ: 1 - 2 - 3
Inner-TX: 8 - 9 - 10 - 15 - 20 - 25 - 27 - 30 mm
R-TX: 8 - 9 - 10 - 15 - 20 - 25 - 27 - 30 mm
• 1 x bit 10 mm
socket wrench: 7 - 8 - 9 - 10 - 12 - 14 mm
LS: 8 - 10 - 12 mm
PH: 2 - 3- 4
TX: 20 - 25 - 27 - 30 - 35 - 40 - 45 - 50 - 55 - 60 mm
Multi teeth XZN: 5 - 6 - 8 - 9 - 10 - 12
• 1 x 1/2"adapter on 10 mm bit
• 1 x adapter for ratchet ring wrench on 10 mm bit
Note
• Can be used in the front or in the back of the drawer
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
076346 Hard Foam Inlet with 1/4" Bit and Socket
Wrench Inserts (60 units)
33 x 682 x 59 1
V1.
7.6.
5/IN
T_P_
WA
130/
7/12
-08-
17/#
7686
18[7
2510
4]
15.70
Workshop trolleys
Hard Foam Inlet with 1/4”, 3/8” SocketWrench Inserts
Delivery amount
• 1/4":
• 12 socket wrench inserts, allen: With wrench size 4 - 4.5 - 5 -
5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• 15 screwdriver inserts: Allen with wrench size:3 - 4 - 5 - 6 - 8
mm; TX: T 15, T 20, T 25, T 30; cross slot; PH 1, PH 2, PH 3;
longitudinal slot 0.6 x 4.5, 0.8 x 5.5, 1.2 x 6.5 mm
• 1 interchangeable ratchet, 1 cardan joint,
2 extensions 55 und 100 mm
• 1 bit adapter
• 3/8":
17 socket wrench inserts, allen: In each of the wrench sizes
6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 -
21 - 22
• 1 interchangeable ratchet, 1 T-shaped sliding handle, 1 cardan
joint,
2 extensions 125 and 250 mm
Article
No.
Article
Designation
PU
Piece
091380 Socket wrench set, 54 units ratchet with disc reverse 1
092814 Socket wrench set, 54 units ratchet with disc reverse
088627 Empty foam inlet 1
V1.7.6.5/IN
T_P_
WA
130/7/12-08-17/#768618[725104]
15.71
Workshop trolleys
Foam Inlets for Wrench Sets Product advantages
• Each tool is stored securely and in its place
• Missing tools are detectable immediately by the 2 layered,
black-blue order system
• The inserts are as chemical resistant as possible (against
numerous oil, solutions and acids), wetness resistant,
dimensionally stable and durable
• All inserts, which are marked with a pencil, are delivered with
a permanent, non-scratchable laser labeling per tool
compartment. The necessary tool or even missing parts can
thus be identified immediately.
Hard Foam Inlet with Double Open-EndedWrench Set
Delivery amount
• 1 x double open-ended wrench in each of the wrench sizes
6x7; 8x9; 10x11; 12x13; 14x15; 16x17; 18x19; 20x22; 21x23;
24x27 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
033957 Empty hard foam inlet for double open-
ended wrench
33 x 228 x 337 1
034581 Hard foam inlet for double open-ended
wrench set
33 x 228 x 337 1
Hard Foam Inlet with Deep Offset DoubleOpen-Ended Wrench
Delivery amount
• 1 x double double open-ended wrench in each of the wrench
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19;
20 x 22; 21 x 23 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
033958 Empty hard foam inlet for deep offset
double open-ended wrench
33 x 228 x 337 1
034580 Hard foam inlet for deep offset double
open-ended wrench
33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
8/11
-10-
14/#
7686
36[3
8446
0]
15.72
Workshop trolleys
Hard Foam Inlet with combination wrenchset
Delivery amount
• 1 x combination wrench in each of the wrench sizes 6 - 7 - 8 -
9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27
mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
033956 Empty hard foam tool inlet for
combination wrench
33 x 228 x 337 1
034582 Hard foam tool inlet with combination
wrench
33 x 228 x 337 1
Long Hard Foam Inlet with CombinationWrench Set
Delivery amount
• 1 x combination wrench in each of the wrench sizes 8 - 9 -
10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27 -
30 - 32 - 34 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
052681 Empty Hard Long Foam Inlet for
Combination Wrench
33 x 456 x 337 1
052807 Hard Long Foam Inlet with Combination
Wrench
33 x 456 x 337 1
Hard Foam Inlet with Double Open-Ended/Combination Wrench Set
Delivery amount
• 1 x double open-ended in each of the wrench sizes 22 x 24,
24 x 27, 30 x 32, 30 x 34 mm
• 1 x combination wrench in each of the wrench sizes, wrench
size 30, 32, 34, 36 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039442 Empty hard foam inlet for double open-
ended/combination wrench set
33 x 566 x 337 1
039722 Hard foam inlet for double open-ended/
combination wrench set
33 x 566 x 337 1
V1.7.6.5/IN
T_P_
WA
130/8/11-10-14/#768636[384460]
15.73
Workshop trolleys
Hard foam inlet with combination ratchet
Delivery amount
• 1 x offset ratchet ring combination wrench in each of the
wrench sizes 10 - 13 - 17 - 19 mm
• 1 x adapter for 1/4", 3/8", 1/2" socket wrench inserts
• 1 x adapter for 1/4” bits
1 x tilt extension for 1/4”, 3/8”, 1/2” socket wrench inserts
for Evolution for RevolutionArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
039441 Empty hard foam inlet for combination
ratchet
33 x 110 x 337 1
039697 Hard foam inlet for combination ratchet 33 x 110 x 337 1
Hard Foam Inlet with CombinationRatcheting Box-End Wrench Set with Joint
Delivery amount
• Each 1 x non-slip combination ratcheting box-end wrench
with joint in each of the wrench sizes 8 - 9 - 10 - 11 - 12 - 13 -
14 - 15 - 16 - 17 - 18 - 19 mm
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
044418 Empty Hard Foam Inlet for Combination
Wrench Set
33 x 228 x 337 1
039718 Hard Foam Inlet with Combination
Ratchet Wrench Set
33 x 228 x 337 1
Hard Foam Inlet with Non-Slip CombinationRatcheting Box-End Wrench
Delivery amount
• Each 1 Fork-Ring Ratchet Wrench Non-Slip WS 8 - 10 - 11 -12 -
13 - 14 - 15 - 16 - 17 - 18 - 19
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043552 Hard Foam Insert for Non-Slip Fork- Ring
Ratchet Wrench empty
33 x 228 x 337 1
043942 Hard Foam Insert with Non-Slip Fork-
Ring Ratchet Wrench
33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
8/11
-10-
14/#
7686
36[3
8446
0]
15.74
Workshop trolleys
Foam Inlets for Screwdriver Sets Product advantages
• Each tool is stored securely and in its place
• Missing tools are detectable immediately by the 2 layered,
black-blue order system
• The inlets are as chemical resistant as possible (against many
oils, solutions and acids), humidity resistant, dimensionally
stable and durable
• All inlets, which are marked with a pencil, are delivered with
a permanent, non-scratchable laser labelling per tool
compartment. The necessary tool or even missing parts can
thus be identified immediately
Hard Foam Inlet with PremiumlineScrewdriver with Impact Cap
Delivery amount
• 1 x slotted screwdriver 5.5 x 213, 6.5 x 238, 8.0 x 271, 10.0 x
296 mm
• 1 x screwdriver in the PH sizes 1, 2 & 3
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
053823 Empty Hard Foam Inlet for Premiumline
Screwdriver Set with Impact Cap PH/LS
33 x 228 x 337 1
054024 Hard Foam Inlet for Premiumline
Screwdriver Set with Impact Cap PH/LS
33 x 228 x 337 1
Hard Foam Inlet with PremiumlineScrewdriver
Delivery amount
• 1x slotted screwdriver 3.5 x 204 x 4.0 x 211, 5.5 x 236, 6.5 x
268, 8.0 x 274 mm
• 1 x screwdriver in the PH sizes 1, 2 & 3
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
054025 Hard Foam Inlet with Screwdriver Set
Premiumline PH/LS
33 x 228 x 337 1
053822 Hard Foam Inlet for Screwdriver Set
Premiumline PH/LS empty
33 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/9/12-08-17/#768651[384570]
15.75
Workshop trolleys
Hard Foam Inlet with PremiumlineScrewdriver Torx
Delivery amount
• 1 x Premium Screwdriver TX 10, TX 15, TX 20, TX 25, TX 27,
TX 30, TX 40
for Evolution for Revolution
Article
No.
Article
Designation
H x B x T
mm
PU
Piece
118995 Hard Foam Inlet with Premiumline
Screwdriver Torx
33 x 228 x 337 1
112261 Empty Hard Foam Inlet with Premiumline
Screwdriver Torx
33 x 228 x 337 1
Hard Foam Inlet with Screwdriver Set LS/PH
Delivery amount
• All sets contain 1 x slotted screwdriver with allen wrench in
each of the sizes 4.5 x 185, 5.5 x 195, 7.0 x 230, 8.0 x 265
mm
• Screwdriver set PH/slotted: additionally 1 x screwdriver in
each of the PH sizes 1, 2, 3
• Screwdriver set PZD/slotted: additionally 1 x screwdriver in
each of the PZD sizes 1, 2, 3
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
033964 Empty hard foam inlet for screwdriver set
PH/PZD/slotted
33 x 228 x 337 1
034572 Hard foam inlet with screwdriver set PH/
slotted
33 x 228 x 337 1
034573 Hard foam inlet with screwdriver set
with impact cap PZD/slotted
33 x 228 x 337 1
034574 Hard foam inlet with screwdriver set
with impact cap PH/slotted
33 x 228 x 337 1
Hard Foam Inlet with Multi-Screwdriver
Delivery amount
• Megapro bit screwdriver,
Megapro additional bit inner-hex WS 2.5 - 4,
Megapro additional bit inner-hex WS 2 - 3
• Multi ratchet
• Impact screwdriver set
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043551 Empty Hard Foam Inlet for Multi-
Screwdriver
33 x 228 x 337 1
043941 Hard Foam Inlet with Multi-Screwdriver 33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
9/12
-08-
17/#
7686
51[3
8457
0]
15.76
Workshop trolleys
Hard Foam Inlet with T-handle hex socketwrench
Delivery amount
• 1 x Superior, 2 component, T-handle hex socket wrench in
each of the wrench sizes 2/90 mm, 2.5/10 0 mm, 3/10 0 mm,
4/150 mm, 5/150 mm, 6/20 0 mm, 8/200 mm, 1 0/200 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039695 Hard foam inlet for T-handle hex socket
wrench
33 x 338 x 337 1
039455 Empty hard foam inlet for T-handle hex
socket wrench
33 x 338 x 337 1
Hard foam Inlet with T-handle TX
Delivery amount
• 1x T-handle hex socket wrench in each of the sizes TX 10, TX
15, TX 20, TX 25, TX 27, TX 30, TX 40, TX 50
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039452 Empty Hard Foam Inlet for T-handle Hex
Socket Wrench
33 x 338 x 337 1
039696 Hard Foam Inlet with T-Handle Hex
Socket Wrench TX
33 x 338 x 337 1
V1.7.6.5/IN
T_P_
WA
130/9/12-08-17/#768651[384570]
15.77
Workshop trolleys
Hard Foam Inlet with Screwdriver TX
Delivery amount
• 1 x Screwdriver TX 8, 10, 15, 20, 25, 27, 30, 40
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
051567 Hard Foam Inlet with Screwdriver Set TX 33 x 228 x 337 1
051071 Empty Hard Foam Inlet for Screwdriver
Set TX
33 x 228 x 337 1
Hard Foam Inlet with Screwdriver for OuterHex Screws
Delivery amount
• 1 x screwdriver for outer hex screws in the wrench sizes 6, 7,
8, 10, 13
• 1 x T-socket wrench for outer hex screws in the wrench sizes
8, 10, 13
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
051070 Hard Foam Inlet for Screwdrivers for
Outer Hex Screws
33 x 338 x 337 1
051568 Hard Foam Inlet with Screwdrivers for
Outer Hex Screws
33 x 338 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
9/12
-08-
17/#
7686
51[3
8457
0]
15.78
Workshop trolleys
Hard Foam Inlet with Screwdriver MagicChanging Blade
Delivery amount
• Each x double screwdriver blade:
Slotted 3.5 x 4.5 mm
Slotted 5.5 x 6.5mm
Phillips PH 1 x PH 2
Phillips PH 2 x PH 3
Phillips PZ 1 x PZ 2
Hex wrench size 3 x Hex ball head in wrench size 3
Hex wrench size 4 x Hex ball head in wrench size 4
Hex wrench size 5 x Hex ball head in wrench size 5
TX 6 x TX 8
TX 7 x TX 9
TX 10 x TX 15
TX 20 x TX 25
TX 30 x TX 40
• Each 1 adapter for the insertion of 1/4" socket wrench inserts
and 1/4" bits
• Hand grip
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043867 Hard Foam Poach including Screws 33 x 228 x 337 1
043558 Hard Foam Poach for Screws, empty 33 x 228 x 337 1
Hard Foam Inlet with Allen Wrench
Delivery amount
• 1 x allen wrench in the wrench size 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 -
7 - 8 - 10
for Evolution for Revolution
With laser
labelling
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
048084 Hard Foam Inlet with Allen Wrench 33 x 110 x 337 1
047821 Empty Hard Foam Inlet with Allen
Wrench
33 x 110 x 337 1
V1.7.6.5/IN
T_P_
WA
130/9/12-08-17/#768651[384570]
15.79
Workshop trolleys
Foam Inlets for Others Product advantages
• Each tool is stored securely and in its place
• Missing tools are detectable immediately by the 2 layered,
black-blue order system
• The inlets are as chemical resistant as possible (against
numerous oil, solutions and acids), wetness resistant,
dimensionally stable and durable
• All inlets, which are marked with a pencil, are delivered with
a permanent, non scratchable laser labeling per tool
compartment. The necessary tool or even missing parts can
thus be identified immediately.
Hard foam inlet with hammer tool set
Delivery amount
• 1 x Topline hammer 500g
• 1 x Plastic hammer 350g
• 1 x Flat chisel
• 1 x Prick punch, 8-edged, 12 mm x 120 mm
• 1 x Split pin tool in each of the diameters 3, 4, 5, 6 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039448 Hard foam inlet for hammer tool set,
empty
33 x 228 x 337 1
039716 Empty hard foam inlet with hammer tool
set
33 x 228 x 337 1
Hard foam inlet with pin punch with handprotection
Delivery amount
• 1 x Pin Punch with Ø of 3, 4, 5, 6, 8 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043554 Empty hard foam insert for pin punch 33 x 228 x 337 1
043943 Hard foam insert for pin punch 33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
10/1
2-08
-17/
#768
665[
3846
72]
15.80
Workshop trolleys
Hard foam inlet with universal pliers set
Delivery amount
• 1 x pair of 3-component side cutters 145 mm
• 1 x pair of 3-component side cutters 160 mm
• 1 x pair of needle nose 3-component pliers, straight pattern,
205 mm
• 1 x pair of power combination max pliers 180 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
100541 Hard foam inlet with pliers set CPI 33 x 228 x 337 1
105886 Empty hard foam inlet for pliers set CPI 33 x 228 x 337 1
Hard foam inlet with 3-component pliersand pipe wrench
Delivery amount
• 1 x 3-component wire cutter 160 mm
• 1 x pair of needle nose, 3-component pliers, straight pattern
205 mm
• 1 x pair of power combination 3-component Max pliers 180
mm
• 1 x Cobra pipe wrench 250 mm
for Evolution for Revolution
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
118997 Hard foam inlet with 3-component pliers
and pipe wrench
33 x 228 x 337 1
112259 Empty hard foam inlet with 3-component
pliers and pipe wrench
33 x 228 x 337 1
Hard foam inlet with circlip pliers set withmulti-grip pliers
Delivery amount
• 1 x for external circlips, 10 – 25 mm
• 1 x for external circlips, 19 – 60 mm
• 1 x for external circlips, 40 – 100 mm
• 1 x for internal circlips, 12 – 25 mm
• 1 x for internal circlips 19 – 60 mm
• 1 x pair of multi-grip pliers 250 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
033963 Empty hard foam inlet for circlips pliers set 33 x 228 x 337 1
034575 Circlip pliers set in foam, 6 units 33 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/10/12-08-17/#768665[384672]
15.81
Workshop trolleys
Hard Foam Inlet With Bent Circlip Pliers Set
Delivery amount
• 1 x bent pair of pliers for outer circlips 10 – 25 mm
• 1 x bent pair of pliers for outer circlips 19 – 60 mm
• 1 x bent pair of pliers for inner circlips12 – 25 mm
• 1 x bent pair of pliers for inner circlips 19 – 60 mm
• 1 x plier bent for snap rings inner 40 – 100 mm
for Evolution for Revolution
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
118996 Hard Foam Insert with Bent Circlip Pliers
Set
33 x 228 x 337 1
112258 Empty Hard Foam Insert with Bent Circlip
Pliers Set
33 x 228 x 337 1
Hard Foam Inlet with Pliers Set 3
Delivery amount
• 1x pair of quattro grip 250 mm
• 1x pair of easy grip pliers 165 mm
• 1x pair of easy grip pliers 235 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043557 Empty Hard Foam Inlet for Pliers Set 3 33 x 228 x 337 1
043939 Hard Foam Inlet with Pliers Set 3 33 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
10/1
2-08
-17/
#768
665[
3846
72]
15.82
Workshop trolleys
Hard Foam Inlet with PU Scraper with 30blades
Delivery amount
• 1 x PU-scraper hand grip
• 10 x blades 13 - 16 - 20 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
043553 Empty Hard Foam Inlet for PU-Scraper 33 x 110 x 337 1
043944 Hard Foam Inlet with PU-Scraper 33 x 110 x 337 1
Hard Foam Inlet with File Set
Delivery amount
• 1 x brake caliper file
1 x key file with wooden handle: flat blunt, flat pointed, half
round, round, triangular, square
• 1 x flat blunt file 250 mm
• 1 x triangular file 250 mm
• 1 x half round file 250 mm
• 1 x round file 250 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039443 Empty Hard Foam Inlet for File Set 33 x 456 x 337 1
039693 Hard Foam Inlet with File Set 33 x 456 x 337 1
Hard Foam Inlet with Measuring- /andCutting Set
Delivery amount
• 1 x scriber 250 mm
• 1 x pocket measuring tape 3m
• 1 x pocket caliper 150mm
• 1 x magazine cutter blue line 100/18
• 1 x saw frame saw blade
• 10 x saw blades 32 teeth
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
051569 Hard Foam Inlet with Measuring and
Cutting-Set
33 x 228 x 337 1
051069 Hard Foam Inlet for Measuring and
Cutting-Set
33 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/10/12-08-17/#768665[384672]
15.83
Workshop trolleys
Hard Foam Inlet - Balancing Part/ EmptyCompartment
Properties
Ideal for small parts
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039440 Hard foam inlet – balancing part/ empty
compartment
33 x 110 x 337 1
Hard Foam Inlet - Cube Foam
Application
• For individual partitioning of organizers for various parts
• Small and pre-punched parts with a cubic shape enable
precise separation
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
039457 Hard foam inlet – cube foam 33 x 228 x 337 1
Hard Long Foam Inlet for ''Revolution'' -Balancing Part/Empty Compartment
Application
• For fixing the tool organizers at the front and back in the
drawers of the “Revolution” workshop cart
Properties
Ideal for small parts
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
042262 Hard long foam inlet – balancing part 33 x 682 x 59 1
V1.
7.6.
5/IN
T_P_
WA
130/
10/1
2-08
-17/
#768
665[
3846
72]
15.84
Workshop trolleys
Hard Plastic Inlets for Socket Wrench Sets Application
• Neat and safe storage of the tools
Product advantages
• Practically compilation of the tools
• Dirt insensitive
• The drawers are optimally used due to the different sizes of
the inserts
• Can be combined with the BS-assortments (complies with
size A)
Plastic Inlet with 1/4" Socket Wrench Setincl. Reversible Ratchet with Quick Release
Delivery amount
• 1 x 1/4” socket wrench insert in each of the wrench sizes 4 -
4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• 1 x reversible ratchet, fine increments
• 1 x bit adapter
• 1 x hand held screwdriver with 1/4”, square
• 1 x T-shaped sliding handle
• 2 x extensions 55 and 100 mm
• 1 x cardan joint
• Per 1 x 1/4” screwdriver insert each of the following: Phillips
1, 2, 3; slotted 4 - 6 - 7 mm; hexagon socket size 3 - 4 - 5 - 6 -
8 mm; TX T 15, T 20, T 25, T 30
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148980 Empty plastic inlet for 1/4" socket wrench
set
51 x 110 x 337 1
047902 Plastic inlet with 1/4” socket wrench set 51 x 110 x 337
Plastic Inlet with 1/4" Socket Wrench Set
Delivery amount
• 1 x 1/4” socket wrench insert in each of the wrench sizes 4 -
4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
• 1 x reversible ratchet, fine increments
• 1 x bit adapter
• 1 x hand held screwdriver with 1/4”, square
• 1 x T-shaped sliding handle
• 2 x extensions 55 and 100 mm
• 1 x 1/4" cardan joint
• 1 x 1/4"screwdriver insert in each of the following: Phillips 1,
2, 3; slotted 4 - 6 - 7 mm; hexagon socket wrench size 3 - 4 -
5 - 6 - 8 mm; TX T 15, T 20, T 25, T 30
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148992 Plastic inlet with 1/4" socket wrench set 51 x 110 x 337 1
148980 Empty plastic inlet for 1/4" socket wrench
set
51 x 110 x 337 1
V1.7.6.5/IN
T_P_
WA
130/11/11-11-25/#768682[383737]
15.85
Workshop trolleys
Plastic Inlet with 1/4" I-Socket incl. FlexRatchet Handle
Delivery amount
• 1 x 1/4" socket wrench insert with wrench size 4 - 4.5 - 5 -
5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm
• 1 x flex ratchet handle
• 1 x handheld screwdriver
• 2 x extensions 50 mm and 100 mm
• 1 x T-shaped sliding handlefor Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148980 Empty plastic inlet for 1/4" socket
wrench set
51 x 110 x 337 1
047903 Plastic Inlet with 1/4" I-Socket-Set 51 x 110 x 337
Plastic Inlet with 1/4" I-Socket
Delivery amount
• 1 x 1/4" socket wrench insert with wrench size, WS 4 - 4.5 -
5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm
• 1 x flex ratchet handle
• 1 x handheld screwdriver
• 2 x extensions 50 mm and 100 mm
• 1 x T-shaped sliding handle
for Evolution for RevolutionArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
148980 Empty plastic inlet for 1/4" socket
wrench set
51 x 110 x 337 1
Plastic Inlet with 3/8" Socket Wrench Setincl. Flex Ratchet Handle
Delivery amount
• 1 x 3/8" socket wrench insert with wrench size 6 - 7 - 8 - 9 -
10 - 11 - 12 - 13 - 14 - 15 -16 - 17 - 18 - 19 - 20 - 21 - 22 mm
• 1 x flex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x extensions 125 and 250 mm
• 1 x cardan jointfor Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148981 Empty Plastic Inlet for 3/8" socket
wrench set
51 x 110 x 337 1
047904 Plastic inlet with 3/8" socket wrench set 51 x 110 x 337
V1.
7.6.
5/IN
T_P_
WA
130/
11/1
1-11
-25/
#768
682[
3837
37]
15.86
Workshop trolleys
Plastic Inlet With 3/8" Socket Wrench Set
Delivery amount
• 1 x 3/8” socket wrench inlet in each of the wrench sizes 6 -
7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 -16 - 17 - 18 - 19 - 20 - 21 -
22 mm
• 1 x reversible ratchet, fine increments
• 1 x T-shaped sliding handle
• 2 x extensions 125 and 250 mm
• 1 x cardan joint
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148993 Plastic Inlet with 3/8" socket wrench
insert
51 x 110 x 337 1
148981 Empty Plastic Inlet for 3/8" socket
wrench set
51 x 110 x 337 1
Plastic Inlet with Long 3/8" and 1/2" SocketWrench Inserts
Delivery amount
• 1 x 3/8" socket wrench inlet in each of the wrench sizes 9 -
10 - 11 mm
• 1 x 1/2" socket wrench inlet in each of the wrench sizes 12 -
13 - 14 - 15 - 16 - 17 - 18 - 19 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
034232 Empty plastic inlet for long socket
wrench inlets
51 x 110 x 337 1
034583 Plastic inlet with 3/8" and 1/2" socket
wrench inlets
51 x 110 x 337 1
Plastic Inlet with TX 1/4", 3/8", 1/2" inserts
Delivery amount
• 1 x internal TX in each of the following: TX 20, TX 25, TX 27, TX
30, TX 40, TX 45, TX 50, TX 55, TX 60
• 1 x external TX in each of the following: E 4, E 5, E 6, E 8, E
10, E 12, E 14, E 18, E 20, E 24
• Insert connector: 1/4” x 3/8”, 5/16” x 1/2”
• 1 x power insert bit 110 mm in each of the following: TX 25,
TX 40, TX 45, TX 55
for Evolution for RevolutionArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
034233 Empty plastic inlet for TX inserts 51 x 110 x 337 1
034587 Plastic Inlet with TX 1/4", 3/8", 1/2
" inserts
51 x 110 x 337 1
V1.7.6.5/IN
T_P_
WA
130/11/11-11-25/#768682[383737]
15.87
Workshop trolleys
Plastic Inlet with 1/2" Socket Wrench Setincl. Flex Ratchet Handle
Delivery amount
• 1 x 1/2" socket wrench insert with wrench size 10 - 11 - 12 -
13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 - 24 - 26 - 27 -
28 - 30 - 32 mm
• 1 x flex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x extensions 125 and 250mm
• 1 x cardan joint
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148982 Empty Plastic Inlet for 1/2" Socket
Wrench Set
51 x 228 x 337 1
047905 Plastic Inlet with 1/2" Socket Wrench Set 51 x 228 x 337
Plastic Inlet with 1/2" Socket Wrench Set
Delivery amount
• 1 x 1/2" socket wrench insert with wrench size 10 - 11 - 12 -
13 - 14 - 15 - 16 - 17 - 18 -19 - 20 - 21 - 22 - 23 - 24 - 26 - 27 -
28 - 30 - 32 mm
• 1 x flex ratchet handle, fine toothed
• 1 x T-shaped sliding handle
• 2 x extensions 125 and 250 mm
• 1 x cardan joint
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148994 Plastic Inlet with 1/2" Socket Wrench
Insert
51 x 228 x 337 1
148982 Empty Plastic Inlet for 1/2" Socket
Wrench Set
51 x 228 x 337 1
Plastic Inlet with 1/2" I-Socket incl. FlexRatchet Handle
Delivery amount
• 1 x flex ratchet handle, fine toothed
• 1 x extension 125 mm
• 1 x extension 250 mm with sliding head
• 1 x cardan joint
• 1 x 1/2" socket wrench insert with sizes 10 - 11 - 12 - 13 - 14 -
15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 mm
• 1 x 1/2" bit-adapter
• 1 x 10 mm bit TX 20, TX 25, TX 27, TX 30, TX 40, TX 45, TX50,
TX 55
• 1 x 10 mm bit allen 5 - 6 - 7 - 8 - 10 - 12 mm
• 1 x 10 mm bit multi tooth M 5, M 6, M 8, M 10, M 12
for Evolution for RevolutionArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
047906 Plastic Inlet with 1/2" I-Socket-Set 51 x 456 x 337
V1.
7.6.
5/IN
T_P_
WA
130/
11/1
1-11
-25/
#768
682[
3837
37]
15.88
Workshop trolleys
Plastic Inlet with 1/2" Power Socket Wrench
Delivery amount
• 1 x 1/2" power socket wrench insert, plastic-coated in each of
the wrench sizes 17 - 19 - 21 mm
• 1 x 1/2" power socket wrench insert in each of the wrench
sizes 17 - 19 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
034227 Empty plastic inlet for 1/2" power socket 51 x 110 x 337 1
034589 Plastic inlet with 1/2" power socket
wrench
51 x 110 x 337 1
Plastic Inlet with 1/2" Impact Sockets
Delivery amount
• For each 1 strength plastic-coated socket wrench: 1/2" socket
size 17 - 19 - 21 mm
• For each 1 power socket wrench: 1/2" socket size 17 - 19 mm
for Evolution for Revolution
Article
No.
Article
Designation
H x W x T
mm
PU
Piece
034227 Empty plastic inlet for 1/2" power socket 51 x 110 x 337 1
034589 Plastic inlet with 1/2" power socket
wrench
51 x 110 x 337 1
Plastic Inlet with socket wrench inserts, 1/2" hexagonal socket
Delivery amount
• 1 x socket wrench insert: 1/2” hexagonal sockets in the
wrench sizes 4 - 5 - 6 - 7 - 8 - 10 - 12 - 14 - 17 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
034226 Empty plastic inlet for socket wrench
inserts, hexagonal socket
51 x 110 x 337 1
034585 Plastic inlet for socket wrench inserts,
hexagonal socket
51 x 110 x 337 1
Plastic Inlet with Loop Ratchet
Delivery amount
• 1x loop ratchet inlet each in the wrench sizes 6 - 9 - 10 - 11 -
12 - 13- 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 mm
1x loop ratchet interchangeable
1 x extension each 75 mm, 150 mm
1 x 1/4” bit adapter
1 x 10 mm bit adapter
1 x adapter for 1/2” socket wrench inserts
1 x adapter for 1/4” socket wrench inserts
1 x bit 10 mm each: TX 20 - TX 25, TX 27, TX 30, TX 40, TX 45,
TX 50, TX 55
1 x bit 10 mm each: Multi tooth M 5, M 6, M 8, M 10, M 12
1 x bit 10 mm each: allen M 5, M 6, M 7, M 8, M 10, M 12
for Evolution for RevolutionArticle
No.
Article
Designation
W x H x D
mm
PU
Piece
034591 Plastic inlet with loop ratchet 51 x 228 x 337
V1.7.6.5/IN
T_P_
WA
130/11/11-11-25/#768682[383737]
15.89
Workshop trolleys
Hard Plastic Inlets for Socket Wrench Sets Application
• Neat and safe storage of the tools
Product advantages
• Practical compilation of the tools
• The drawers are used optimally used due to the different
sizes of the inserts
• Can be combined with BS-assortments (complies with size
A)
Plastic inlet with double open-endedwrench set
Delivery amount
• 1 x double open-ended wrench, size 6 x 7, 8 x 9, 10 x 11, 12 x
13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148995 Inlet with double open-ended wrench-
Set, 10 units
51 x 228 x 337 1
149428 Empty plastic inlet for double open-
ended wrench-set,
51 x 228 x 337 1
Plastic inlet with double ended wrench set
Delivery amount
• 1 x double-ended wrench in each of the wrench sizes 6 x 7, 8
x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x
23 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148996 Plastic insert for Plastic inlet with
double-ended wrench set, 9 units
51 x 228 x 337 1
148983 Empty plastic insert for Plastic inlet with
double-ended wrench set
51 x 228 x 337 1
Plastic inlet with combination wrench set
Delivery amount
• 1 x combination wrench in each of the wrench sizes 6 - 7 - 8 -
9 - 10 - 11 - 12 - 13 -14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24 - 27
mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148998 Inlet with combination wrench-set short,
18 units
51 x 228 x 337 1
148997 Empty plastic inlet for combination
wrench set 101 K
51 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
12/1
1-10
-17/
#784
675[
3838
51]
15.90
Workshop trolleys
Plastic inlet with double open-ended/combination wrench set
Delivery amount
• 1 x double open-ended wrench with wrench size 22 x 24, 24
x 27, 30 x 32, 30 x 34 mm
• 1 x combination wrench with wrench size 30, 32, 34, 36 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
005656 Plastic inlet with double open-ended/
combination wrench set
51 x 566 x 337 1
170746 Empty plastic inlet for double open-
ended/combination wrench set
51 x 566 x 337 1
Plastic inlet with offset ratchet combinationwrench set
Delivery amount
• 1 x offset ratchet combination wrench with joint in each of
the wrench sizes 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -
19 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
044419 Open-Jawed and Ring Ratchet Wrench 51 x 228 x 337 1
034593 Plastic inlet with offset ratchet
combination wrench set
51 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/12/11-10-17/#784675[383851]
15.91
Workshop trolleys
Hard Plastic Inlets for Screwdriver Sets Application
• Neat and safe storage of the tools
Product advantages
• Practical compilation of the tools
• The drawers are optimally used due to the different sizes of
the inlets
• Can be combined with BS-assortments (complies with size
A)
Plastic inlet with screwdriver set withimpact cap 2-component LS/PH
Delivery amount
• 1 x slotted screwdriver in each of the sizes 4.5 x 185, 5.5 x
195, 7.0 x 230, 8.0 x 265 mm
• 1 screwdriver in each of the PH sizes 1, 2, 3
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148988 Cart inlet for screwdrivers 51 x 228 x 337 1
005659 Plastic inlet with screwdriver set with
impact cap
51 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
13/1
1-10
-17/
#784
749[
3839
96]
15.92
Workshop trolleys
Plastic inlet with 2-component LS/PZscrewdriver set and impact cap
Delivery amount
• 1 x slotted screwdriver 4.0 x 75mm
• 1 x slotted screwdriver with allen wrench 5.5 x 100, 7.0 x 125,
8.0 x 150 mm
• 1 x slotted screwdriver in the PH sizes 1, 2, 3
• 1 x voltage tester screwdriver 3 x 65 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
149005 Plastic Inlet with Screwdriver set, 2-
component LS/PZ grip, 8 units
51 x 228 x 337 1
148988 Cart inlet for screwdrivers 51 x 228 x 337 1
Plastic insert with T-shaped handle hexagonsocket
Delivery amount
• 1 x Superior T-shaped hexagonal 2-component socket, in each
of the wrench sizes 2/90mm, 2,5/100mm, 3/100mm,
4/150mm, 5/150mm, 6/200mm, 8/200mm, 10/200mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
004867 Empty plastic inlet for T-shaped handle
TX, hex socket
51 x 456 x 337 1
005705 Plastic inlet with an 8-piece set of T-
shaped Handle Hex Socket Wrenches
51 x 456 x 337 1
Plastic inlet with T-shaped handle TX
Delivery amount
• 1 x Superior T-shaped 2-component socket in each of the
sizes TX 10, TX 15, TX 20, TX 25, TX 27, TX 30, TX 40, TX 50
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
004867 Empty plastic inlet for T-shaped handle
TX, hex socket
51 x 456 x 337 1
005654 Plastic inlet with an 8-part Set of T-
shaped handle socket wrenches, TX
51 x 456 x 337 1
V1.7.6.5/IN
T_P_
WA
130/13/11-10-17/#784749[383996]
15.93
Workshop trolleys
Hard Plastic Inlets for Other Products Application
• Neat and safe storage of the tools
Product advantages
• Practical compilation of the tools
• The drawers are optimally used due to the different sizes of
the inserts
• Can be combined with BS-assortments (complies with size
A)
Plastic inlet with hammer tool set
Delivery amount
• 1 x Topline hammer 500g
• 1 x plastic hammer 350g
• 1 x flat chisel
• 1 x prick punch, octagon, 12 mm x 120 mm
• 1 x split pin tool in each of the diameters 3, 4, 5, 6 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
148999 Plastic inlet with hammer tool set 51 x 228 x 337 1
148985 Empty plastic inlet for hammer tool set 51 x 228 x 337 1
V1.
7.6.
5/IN
T_P_
WA
130/
14/1
1-10
-17/
#785
062[
3841
53]
15.94
Workshop trolleys
Plastic inlet with universal pliers set
Delivery amount
• 1 pair of 3-component side cutters 145 mm
• 1 pair of 3-component side cutters 160 mm
• 1 pair of 3-component fpair of needle nose pliers, straight
pattern 205 mm
• 1 pair of 3-component power combination Max pliers 180
mm
• 1 x multi-grip pliers 250 mm
for Evolution for Revolution
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
100540 Plastic inlet with 3-component pliers set 51 x 228 x 337 1
002106 Empty plastic inlet for 3-component
pliers set
51 x 228 x 337 1
Plastic inlet with circlip pliers set
Delivery amount
• 1 pair of pliers for external circlips 10–25 mm
• 1 pair of pliers for external circlips 19–60 mm
• 1 pair of pliers for external circlips 40–100 mm
• 1 pair of pliers for internal circlips 12–25 mm
• 1 pair of pliers for linternal circlips 19–60 mm
for Evolution for Revolution
Article
No.
Article
Designation
H x B x T
mm
PU
Piece
002107 Empty cart inlet for circlip pliers 51 x 228 x 337 1
002277 Plastic cart inlet with circlip pliers set 51 x 228 x 337 1
V1.7.6.5/IN
T_P_
WA
130/14/11-10-17/#785062[384153]
15.95
Workshop trolleys
Plastic inlet — balancing part / emptycompartment
Application
• For optimum use of drawer space
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
171628 Plastic inlet – balancing compartment /
empty compartment, large
51 x 228 x 337 1
148991 Plastic inlet – balancing part / empty
compartment
51 x 110 x 337 1
Plastic inlet — balancing compartment/empty compartment “Revolution”
Application
• For fixing the tool organizers at the front and back in the
drawers of the “Revolution” workshop trolley
Properties
Ideal for small parts
Note
• For each drawer two balancing compartments are required
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
041508 Plastic inlet – balancing part/empty
compartment for ''Revolution''
51 x 342 x 70 1
V1.
7.6.
5/IN
T_P_
WA
130/
14/1
1-10
-17/
#785
062[
3841
53]
15.96
Miscellaneous
Vices
Matador Vice
Product advantages
• Completely made of forged steel and hardened surface with
a large anvil
• Precision guidance with forced locking and adjustment
facility
• Measuring scale for quick preset
Note
• Protective jaws made from plastic
Article
No.
Article
Designation
Jaws width
mm
Opening of
jaws
mm
PU
Piece
217581 Matador Vice 8281 120 150 1
217590 Matador Vice 8281 140 200 1
217603 Matador Vice 8281 160 225 1
Accessories available Jaws width
mm
PU
Piece
217646 Pair of Protective Jaws 120 120 1
217654 Pair of Protective Jaws 140 140 1
217662 Pair of Protective Jaws 160 160 1
V1.7.6.5/IN
T_P_
WA
150/1/12-08-17/#803059[61053]
15.97
Miscellaneous
"Compact" Workbenches
"Mod. 1500" Workbench
Main user
Automotive engineering, body engineering, forwarding agents,
Internal workshops, truck repair shops, car repair shops
Properties
Two-colored, body light gray RAL 7035 body,
Drawers / doors distant blue RAL 5023, Multiplex board 40
mm, left and right side one drawer with 150 mm and a door
with a height of 420 mm perforated side panels, ball-beared
drawers, can be pulled out by 80% 80 kg per drawer, central
locking
Article
No.
Article
Designation
H x W x T
mm
PU
Piece
165312 Workbench Model “ Mod. 1500" 850 x 1520 x 750 1
Workbench Mod. 2000
Main user
Automotive engineering, body engineering, forwarding agents,
Internal workshops, truck repair shops, car repair shops
Properties
Two-color housing light-gray RAL 7035 body, drawers and
doors distant blue RAL 5023, multiplex board 40 mm, left side:
one door with a height of 570 mm, middle: 1 shelf, right: 3
drawers with heights of, 120, 150 and 300 mm, perforated side
panels, ball-beared drawers can be pulled out by 80%, payload
80 kg per drawer, central locking
Article
No.
Article
Designation
H x W x T
mm
PU
Piece
165310 Workbench "Mod. 2000" 850 x 2000 x 750 1
Workbench Mod. 2500
Main user
Automotive engineering, body engineering, forwarding agents,
Internal workshops, truck repair shops, car repair shops
Properties
Two-color light-gray RAL 7035 body, drawers and doors distant
blue RAL 5023, multiplex board 40 mm, left: left side: one door
with a height of 570 mm, middle:1 shelf, right: 3 drawersed,
120, 150 and 300 mm height, perforated side panels, ball-
beared drawers can be pulled out by 80%, payload 80 kg per
drawer, central locking
Article
No.
Article
Designation
H x W x T
mm
PU
Piece
165311 Workbench Mod. 2500 850 x 2000 x 750 1
V1.
7.6.
5/IN
T_P_
WA
150/
2/12
-08-
17/#
8029
28[6
1104
]
15.98
Miscellaneous
"Compact" Workbenches
"Compact 8266" Workbench
Main user
Automotive engineering, body engineering, Internal
workshops, forwarding agents, toolmaking
Technical data
Drawer H x W x D: 80 x 430 x 540 mm
Folding doors H xW: 420 x 460 mm
Weight: 75 kg
Design: Sheet steel, lacquered steel profile
Carrying capacity of the drawer: Approx. 50 kg
Color: RAL 5003 blue
Properties
Worktop is made from 40 mm thick, multilayered glued
beechwood, foot stand U-profile 75 x 50 mm, with floor plates
for floor mounting, cabinet and draw can be locked, with ample
storage space behind the hinged door that is divided by 2
removable shelves,drawers move smoothly even with a full
load
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
428266 Compact 8266 840 x 1500 x 700 1
"Compact 8267" Workbench
Main user
Automotive engineering, body engineering, Internal
workshops, forwarding agents, toolmaking
Technical data
Drawer H x W x D: 80 x 430 x 540 mm
Folding doors H x W: 420 x 460 mm
Weight: 115 kg
Design: Sheet made of steel, lacquered steel profile
Carrying capacity of the drawer: approx. 50 kg
Color: RAL 5003 blue
Properties
Worktop is made from 40 mm thick, multilayered glued
beechwood, foot stand U-profile 75 x 50 mm, with floor plates
for floor mounting, cabinet and draw can be locked, with ample
storage space behind the hinged door that is divided by 2
removable shelves, drawers move smoothly even with a full
load
Article
No.
Article
Designation
W x H x D
mm
PU
Piece
108876 "Compact 8267" Workbench 840 x 2000 x 700 1
V1.7.6.5/IN
T_P_
WA
150/3/11-11-04/#865338[802903]
15.99
Miscellaneous
Rolling Workbench plus Top Cabinet and Accessories
"Evolution" Rolling Workbench with TopCabinet
Application
• Mobile workstation system with large, diverse commercial
spaces
Main user
Automotive engineering, body engineering, forwarding agents,
truck repair shops, car repair shops, Internal workshops
Product advantages
• Roller bearing drawer slides for ultra smooth running drawers
• Single lock to prevent unintentional sliding out
• 2 fixed and swivel castors with double stop plates for secure
state
Technical data
Rolling workbench
Weight: 104 kg
Capacity: 300 kg
Color: Blue, powder-coated
Drawers
Capacity: each 30 kg
Effective extension length: 440 mm
Drawer dimensions (H x W x D): 1 x 70 x 1000 x 540 mm
3 x 70 x 460 x 540 mm
1 x 215 x 460 x 540 mm
Properties
Right side with lockable door and adjustable storage shelf
Large drawer over total width
3 flat drawers and 1 deep drawer on the left side
Drawers with lettering spaces protected by plastic film
Central lock for all drawers and side door
Large, sturdy beech wood panel
Article
No.
Article
Designation
Width
mm
Height
mm
Depth
mm
PU
Piece
141708 "Evolution" Rolling Workbench
with Top Cabinet
1200 1525 600 1
V1.
7.6.
5/IN
T_P_
WA
150/
4/12
-08-
17/#
8030
63[6
1274
]
15.100
Miscellaneous
Wall and Top Cabinet
Application
• Can be used as a wall cabinet or top cabinet
Main user
Automotive engineering, body engineering, forwarding agents,
truck repair shops, car repair shops, Internal workshops
Product advantages
• Removable middle partition wall for storing extremely bulky
tools
Technical data
Wall and top cabinet
Weight: 36 kg
Capacity: 50 kg
Color: Blue, powder-coated
Properties
Sturdy steel tool cabinet
2-door, with perforation on all sides, rear panels and door
panels
Can be used as an attachment for the "Evolution" rolling
workbench or closet
Perforated metal for use of the holder no.1, 3, 4 and 8
Delivery amount
• 2 individually adjustable shelves
Article
No.
Article
Designation
Width
mm
Height
mm
Depth
mm
PU
Piece
141710 Wall and Top Cabinet 1200 600 300 1
"Evolution" Rolling Workbench
Delivery amount
• Rolling workbench without top cabinet
Article
No.
Article
Designation
Width
mm
Height
mm
Depth
mm
PU
Piece
141709 "Evolution" Rolling Workbench 1200 925 600 1
V1.7.6.5/IN
T_P_
WA
150/4/12-08-17/#803063[61274]
15.101
Miscellaneous
Accessories for "Evolution" RollingWorkbench
Properties
Bera assortments can be housed in pairs in the drawers
Moving of the products is prevented through the retrofittable
stop bar.
Article
No.
Article
Designation
PU
Piece
060117 Look 1
060118 Pair of rails for narrow drawers 1
060119 Pair of rails for wide drawers 1
024198 Plastic inlets 50 325 225 1
232807 Plastic inlets 50 325 225 1
232815 Plastic inlets 50 325 225 1
232823 Plastic inlets 50 325 225 1
234800 Plastic inlets 50 325 225 1
278904 Plastic inlets 50 325 225 1
317241 Square plastic 50 325 225 1
Cross and lengthwise dividers
Properties
Cross and lengthwise dividers for the drawers can be
retrofitted without problems
Drawer Divider Set 8-fold Drawer Divider Set 12-fold
Drawer Divider Set 16-fold
Article
No.
Article
Designation
Divider
number
Cross
divider
number
PU
Piece
141711 Drawer Divider Set 8 way 1 6 1
141713 Drawer Divider Set 12 way 2 9 1
141714 Drawer Divider Set 16 way 3 12 1
144722 Drawer Divider 1 - 1
Accessories
Properties
Chemical and storage compartment provides additional
storage possibilities and can be easily mounted
Ribbed rubber mat to prevent sliping of tools in the drawer
Article
No.
Article
Designation
PU
Piece
142305 Rubber insert for large drawer 1
142306 Rubber insert for small drawer 1
V1.
7.6.
5/IN
T_P_
WA
150/
4/12
-08-
17/#
8030
63[6
1274
]
15.102
Miscellaneous
Tables, Support Blocks and Car Creepers
Rolling Seat — Car Creeper
Rolling seat and dolly in a single unit
Application
• Working underneath vehicles or working in a comfortably
seated position
• Suitable as a rolling seat for work at knee level due to the
ergonomically suited seating height of 450 mm, e.g. for
bodywork
• Suitable as a dolly for working on floor level due to low
height of just 90 mm, e.g. for repairs underneath the vehicle
Main user
Truck repair shops, car repair shops, body engineering,
automotive engineering, Internal workshops
Product advantages
• Fully upholstered lying area for comfortable use
• Movable support parts and lever operation for easy
changeover from the lying to the sitting position
• Lightweight and safe stand due to stable steel construction
• Effortless movement due to 7 steering castors
• Practical tool storage
Properties
Color: Blue, weight: 11 kg, easy-to-clean surface
Article
No.
Article
Designation
L x W x H
mm
PU
Piece
157027 Rolling seat / dolly 1250 x 450 x 150 1
024861 Rolling seat / dolly, set of 3
parts
- 1
Spares PU
014277 Wheel for car-creeper 1
Car Creeper
Application
• Working underneath vehicles
Main user
Truck repair shops, car repair shops, body engineering,
automotive engineering, Internal workshops
Properties
Color: Black, comfortable use due to ergonomic flat shape,
practical storage compartment for tools and small parts, long
service life due to extremely robust and break-proof plastic
Article
No.
Article
Designation
L x W x H
mm
PU
Piece
119031 Plastic car creeper 990 x 505 x 95
Spares PU
119033 Replacement castors 4
V1.7.6.5/IN
T_P_
WA
150/5/12-08-17/#803048[61742]
15.103
Miscellaneous
Foldable Support Block
Product advantages
• Practical and saves space as it can be folded
• Stable, max. load 100 kg per support block
• Safe operation due to slip-proof support
• Saves time due to easy operation
Article
No.
Article
Designation
H x W x D
mm
PU
Piece
138767 Foldable Support Block 800 x 1000 x 85 1
014089 Foldable Support Block, 3-Part 800 x 1000 x 85 1
Work Stool
Application
• Working on vehicles
Main user
Truck repair shops, car repair shops, body engineering,
automotive engineering, Internal workshops
Properties
Color: Blue/black, stable base with tool board, 5 rotating
wheels, 2 of which have brakes, height-adjustable from 360
mm to 475 mm
Article
No.
Article
Designation
PU
Piece
675970 Work stool 1
Spares PU
041272 Replacement castor without brake 1
Workbench
Application
• Working on vehicles
• Working on car roofs
Main user
Truck repair shops, car repair shops, body engineering,
automotive engineering, Internal workshops
Properties
Color: Blue/red, robust construction, fully demountable
Article
No.
Article
Designation
L x W x H
mm
PU
Piece
107079 Workbench 1000 x 300 x 370 1
V1.
7.6.
5/IN
T_P_
WA
150/
5/12
-08-
17/#
8030
48[6
1742
]
15.104
Miscellaneous
Support Table BR 10-41
Application
• Support of sheet metal parts or windscreens
Main user
Painting contractors, automotive glass
Technical data
Width: 1150 mm
Depth when unfolded: 490 mm to 660 mm
Height when unfolded: 1040 mm to 940 mm
Properties
Color: Blue, support area is plastic-coated, height-adjustable
and foldable
Article
No.
Article
Designation
PU
Piece
103611 Support Table BR 10-41 1
Mobile Painting Stand
Product advantages
• Hanging devices are rotatable and thus enable bilateral
painting of the parts
• Adjustable for the diverse parts
Technical data
Length: 160 – 230 cm
Height: 98 cm
Article
No.
Article
Designation
PU
Piece
117797 Mobile Painting Stand 1
Axle Stand
Product advantages
• Stable 3-leg design, height-adjustable in 5 increments
Properties
The bolt is securely fixed to the stand with a chain
BU 3
BU 7 BU 10
Type Min. Support
dimensions mm
mm
Max. Support
dimensions mm
mm
Capacity
t
BU 3 350 500 3
BU 7 650 1070 7
BU 10 650 1070 10
Article
No.
Article
Designation
Capacity
t
PU
Piece
170099 Axle Stand 8 1
170098 Axle Stand 12 2
Allied products PU
012941 ORA-20117: Product is not released.
V1.7.6.5/IN
T_P_
WA
150/5/12-08-17/#803048[61742]
15.105
Miscellaneous
Collection Trays
Cooling Water – Collection Tray
Application
• Collection of cooling water and waste oil
Technical data
Volume: 28 l
Weight: 1.9 kg
Height: 120 mm
Length: 650 mm
Width: 450 mm
Material: PE, blue
Properties
Smooth, wear-resistant surface, chemical and heat resistant,
shatterproof plastic, flat design suitable for lowered vehicles
Article
No.
Article
Designation
PU
Piece
147322 Cooling Water – Collection Tray 1
Oil Collection Trays
Application
• Environmentally friendly storage and intra-corporate transport
of substances harzadous to water e.g. oil, nitro solutions,
cleaner, alcohols
Technical data
Collection Tray 2 x 200 liter
Volume: 208 l
Capacity: 800 kg
L x W x H: 1236 x 816 x 328 mm
Collection Tray 4 x 200 liter
Volume: 210 l
Capacity: 1600 kg
L x W x H: 2460 x 816 x 223 mm
Properties
Grid zinc plated, floor clearance approx. 10 cm, made of steel
sheet (St 37-2, DIN 17100)
Note
• Granted design approval in accordance with water laws (No.
19h 91-3)
For placing of 2 barrels of 200 l each
For placing of 4 barrels of 200 l each
Article
No.
Article
Designation
PU
Piece
147441 Collection Tray for Barrels 4 x 200 l 1
147442 Collection Tray for Barrels 2 x 200 l 1
V1.
7.6.
5/IN
T_P_
WA
150/
6/12
-08-
17/#
8027
59[6
4362
]
15.106
Miscellaneous
Collection Pan
Application
• Collection of waste oil and cooling water
Product advantages
• Insensitive as the material is resistant against acid,
chemicals, oil and benzine
• Problemless decanting by funnel discharge
Technical data
Volume: 13.8 l
Weight: 2 kg
Height: 13 cm
Diameter: 49 cm
Material: PE, recyclable
Properties
Extremely flat, durable, easy to clean
Article
No.
Article
Designation
PU
Piece
879304 Round Pan 1
Fuel Canister 20 l
Application
• Suitable for liquid fuels such as (diesel and gasoline)
Product advantages
• Sturdy and insensitive to impact
Properties
Flexible outlet pipe stored in the canister, sealing cap secured
with a fixing band to prevent loss
Note
• TÜV (German Association for Technical Inspection)
• UN/BAM (Federal Institute for Materials Research and
Testing) approval
Article
No.
Article
Designation
Capacity
l
PU
Piece
032506 Fuel Canister 20 1
V1.7.6.5/IN
T_P_
WA
150/6/12-08-17/#802759[64362]
15.107
Miscellaneous
Water hoses and fittings
PVC Hosepipe for Water
Product advantages
• 5-layered structure offers flexibility and stability, with the
highest level of resistance to pressure, kinking and being
driven over - for easy, problem free use
• Soft PVC provides long service life thanks to UV resistance,
kink resistance and wear resistance
The smooth inside surface prevents deposits and guarantees
optimum flow at all times
Properties
Highly temperature resistant from -20°C to +60°C, cadmium-
free
1 Soft layer of yellow PVC, 2 Yellow intermediate layer, 3
Article
No.
Article
Designation
interior -Ø
Zoll
Length
m
Wall thickness
mm
Operating
pressure
bar
Bursting
pressure
bar
PU
Piece
034021 PVC Hosepipe for Water 1/2" 50 2,25 8 20 1
034022 PVC Hosepipe for Water 3/4" 50 2,6 6 16 1
Hose Fittings
Technical data
Material: Brass
Two-way tap with quick-release
coupling
Spray nozzle with
quick-release
coupling
Quick-release
coupling IGQuick-release
coupling AG
Hose coupling
V1.
7.6.
5/IN
T_P_
WA
150/
8/12
-08-
17/#
8030
41[1
5104
1]
15.108
Miscellaneous
Fire Extinguisher
TOTAL Fire Extinguisher 6 kg
Product advantages
• Refillable, ready for immediate use at constant pressure
• Jet of extinguishing agent can be shut off
• Tested in accordance with DIN EN 3
Technical data
Working temperature: -30 °C to +60 °C
Fire classes: A, B, C
Power class A: 34 A
Power class B: 233 B
W x H: 230 x 530 mm
Weight: 9.5 kg
Diameter: 150 mm
Properties
Portable constant pressure fire extinguisher with a 6 kg
capacity, tube is weather and UV-resistant; bracket integrated
into the stable foot ring for an extinguishing nozzle, brass
fitting with an integrated testing valve
Delivery amount
• Wall-mounting bracket
Note
• 1. In line with the Ordinance on Operational Safety
Regulations, fire extinguishers should be replaced every 20 –
25 years
• 2. Fire extinguishers must be tested every 2 years and
undergo a TÜV(German Association for Technical Inspection)
inspection every 10 years
Article
No.
Article
Designation
PU
Piece
032723 TOTAL Fire Extinguisher 6 kg 1
V1.7.6.5/IN
T_P_
WA
150/9/11-10-31/#857227[857222]
15.109
Miscellaneous
Building Buckets, Mortar Buckets/Mortar Boxes
Building Buckets
Product advantages
• Recyclable
• With a liter scale
Properties
Galvanized handle, Ø 5 mm, made from high quality
polyethylene
Note
• 12 l bucket with a smooth base
• 20 l bucket with a crossed bottom (heavy-duty version)
Article
No.
Article
Designation
Volume
l
Height
mm
Ø
mm
PU
Piece
032725 Building Bucket 12 235 310 1
032728 Building Bucket 20 265 315 1
V1.
7.6.
5/IN
T_P_
WA
150/
11/1
2-08
-17/
#865
333[
7299
40]
15.110
Top Related