International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 August to 31 August 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8 Ships and marine technology
ISO/NP 13643-5 Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials
ISO/CD 13643-6 Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials
ISO/NP 16145-4 Ships and marine technology — Protective coatings and inspection method — Part 4: Measuring method of water soluble salts
TC 10 Technical product documentation
ISO/CD 11540-1 Writing and marking instruments — Part 1: Specification for caps to reduce the risk of asphyxiation
ISO/CD 11540-2 Writing and marking instruments — Part 2: Specification for end closures to reduce the risk of asphyxiaton
TC 20 Aircraft and space vehicles
ISO/CD 16697 Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials
ISO/CD 16698 Methods for estimation of future geomagnetic activity
TC 21 Equipment for fire protection and fire fighting
ISO 7240-24:2010/CD Amd 1
Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1
TC 33 Refractories
ISO/CD 5017 Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
TC 38 Textiles
ISO/CD 20743 Textiles — Determination of antibacterial activity of antibacterial finished products
TC 42 Photography
ISO/CD 22028-2 Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)
TC 44 Welding and allied processes
ISO/CD 669 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
ISO/CD 5826 Resistance welding equipment — Transformers — General specifications applicable to all transformers
TC 86 Refrigeration and air-conditioning
ISO/WD 16345 Water-cooling towers — Testing and rating of thermal performance
TC 96 Cranes
ISO/CD 17440 Cranes — General Design — Limit states and proof of competence of forged hooks
TC 121 Anaesthetic and respiratory equipment
ISO/WD 16571 Medical gas systems - Systems for evacuation of plume generated by medical devices
TC 130 Graphic technology
ISO/CD 12647-4 Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 4: Publication gravure printing
TC 131 Fluid power systems
ISO/NP 7241-1 Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements
TC 156 Corrosion of metals and alloys
ISO 8044:1999/CD Amd 1
Corrosion of metals and alloys — Basic terms and definitions — Amendment 1
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO/CD 4074 Natural latex rubber condoms — Requirements and test methods
TC 159 Ergonomics
ISO/CD 9241-391 Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures
TC 163 Thermal performance and energy use in the built environment
ISO/NP 15758 Hygrothermal performance of building equipment and industrial installations — Calculation of water vapour diffusion — Cold pipe insulation systems
TC 168 Prosthetics and orthotics
ISO/CD 16955 Quantification of physical parameters of ankle foot devices and foot units
TC 173 Assistive products for persons with disability
ISO/NP 7176-22 Wheelchairs — Part 22: Set-up procedures
TC 198 Sterilization of health care products
ISO 15883-1:2006/CD Amd 1
Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1
TC 201 Surface chemical analysis
ISO/CD 13083 Definition and calibration of the spatial resolution of electrical scanning-probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
TC 217 Cosmetics
ISO/NP TR 14735 Cosmetics - Minimising and determining nitrosamines in cosmetics
JTC 1 Information technology
ISO/IEC NP 14165-243
Information technology — Fibre Channel — Part 243: Backbone-3 (FC-BB-3)
ISO/IEC 14496-16/PDAM 2
Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) — Amendment 2: Multi-resolution 3D mesh compression
ISO/IEC 15444-1:2004/PDAM 6
Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 6: Updated ICC profile support and resolution clarification
ISO/IEC CD 23000-10
Information technology — Multimedia application format (MPEG-A) — Part 10: Video surveillance application format
ISO/IEC CD 23005-1
Information technology — Media context and control — Part 1: Architecture
ISO/IEC CD 23005-2
Information technology — Media context and control — Part 2: Control information
ISO/IEC CD 23005-3
Information technology — Media context and control — Part 3: Sensory information
ISO/IEC CD 23005-4
Information technology — Media context and control — Part 4: Virtual world object characteristics
ISO/IEC CD 23005-5
Information technology — Media context and control — Part 5: Data formats for interaction devices
ISO/IEC CD 23005-6
Information technology — Media context and control — Part 6: Common types and tools
ISO/IEC 19794-14/PDAM 1
Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conformance Testing Methodology
DIS circulated
Period from 01 August to 31 August 2011
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
IIW International Institute of Welding
ISO/DIS 14346 * Welding — Static design procedure for hollow section joints 2012-01-23
TC 8 Ships and marine technology
ISO/DIS 16548 Ships and marine technology — Ship design — General guidance on emergency towing procedure
2012-01-24
TC 17 Steel
ISO/DIS 13270 * Steel fibres for concrete — Definitions and specifications 2012-01-18
TC 22 Road vehicles
ISO/DIS 6550-3 * Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs
2012-01-17
(Revision of ISO 6550-3:2009)
ISO/DIS 16750-3 * Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
2012-01-13
(Revision of ISO 16750-3:2007)
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 4254-1 * Agricultural machinery — Safety — Part 1: General requirements 2012-01-05
(Revision of ISO 4254-1:2008)
TC 29 Small tools
ISO/DIS 513 * Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
2012-01-16
(Revision of ISO 513:2004)
TC 35 Paints and varnishes
ISO/DIS 1524 Paints, varnishes and printing inks — Determination of fineness of grind 2012-01-05
(Revision of ISO 1524:2000)
TC 42 Photography
ISO/DIS 12234-1 Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model
2012-01-10
(Revision of ISO 12234-1:2007)
TC 44 Welding and allied processes
ISO/DIS 16338 * Welding for aerospace applications — Resistance spot and seam welding 2012-01-23
TC 48 Laboratory equipment
ISO/DIS 6556 * Laboratory glassware — Filter flasks 2012-01-26
(Revision of ISO 6556:1981)
TC 58 Gas cylinders
ISO/DIS 19078 * Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
2012-01-03
(Revision of ISO 19078:2006)
TC 61 Plastics
ISO/DIS 11963 * Plastics — Polycarbonate sheets — Types, dimensions and characteristics 2012-01-12
(Revision of ISO 11963:1995)
ISO/DIS 13106 * Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs 2012-01-20
ISO/DIS 13636 * Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
2012-01-12
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 8300 * Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of nuclear grade quality — Gravimetric method
2012-01-23
(Revision of ISO 8300:1987)
ISO/DIS 8425 * Nuclear fuel technology — Determination of plutonium in pure plutonium nitrate solutions — Gravimetric method
2012-01-23
(Revision of ISO 8425:1987)
TC 92 Fire safety
ISO/DIS 12468-1 * External exposure of roofs to fire — Part 1: Test method 2012-01-17(Revision of ISO 12468-1:2003)
TC 94 Personal safety -- Protective clothing and equipment
ISO 16602:2007/DAmd 1
* Protective clothing for protection against chemicals — Classification, labelling and performance requirements — Amendment 1
2012-01-27
ISO/DIS 16900-1.3 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage
2011-10-27
ISO/DIS 16900-11 * Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision
2012-01-27
TC 96 Cranes
ISO/DIS 16625 * Cranes and hoists — Selection of wire ropes, drums and sheaves 2012-01-24(Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)
ISO/DIS 15442 Cranes — Safety requirements for loader cranes 2012-01-16
(Revision of ISO 15442:2005)
TC 104 Freight containers
ISO/DIS 1496-1 * Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes
2012-01-18
(Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO 1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)
TC 112 Vacuum technology
ISO/DIS 14291 * Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers 2012-01-12
TC 113 Hydrometry
ISO/DIS 4359 Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes
2012-01-18
(Revision of ISO 4359:1983, ISO 4359:1983/Cor 1:1999)
TC 120 Leather
ISO 5431:1999/DAmd 1
Leather — Wet blue goat skins — Specification — Amendment 1 2012-01-16
ISO 5432:1999/DAmd 1
Leather — Wet blue sheep skins — Specification — Amendment 1 2012-01-16
ISO 5433:1999/DAmd 1
Leather — Bovine wet blue — Specification — Amendment 1 2012-01-16
TC 122 Packaging
ISO/DIS 18601 * Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment
2012-01-03
ISO/DIS 18602 * Packaging and the environment — Optimization of the packaging system 2012-01-03
ISO/DIS 18603 * Packaging and the environment — Reuse 2012-01-03
ISO/DIS 18604 * Packaging and the environment — Material recycling 2012-01-03
ISO/DIS 18605 * Packaging and the environment — Energy recovery 2012-01-03
ISO/DIS 18606 * Packaging and the environment — Organic recycling 2012-01-03
TC 123 Plain bearings
ISO/DIS 13939 Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load capacity, friction coefficient and lifetime
2012-01-24
TC 130 Graphic technology
ISO/DIS 15339-1 * Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles and characterized reference printing conditions
2012-01-05
TC 131 Fluid power systems
ISO/DIS 14540 * Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
2012-01-05
ISO/DIS 14541 * Hydraulic fluid power — Dimensions and requirements for screw-to-connect type quick-action couplings for general purpose
2012-01-05
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 16422 * Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
2012-01-12
(Revision of ISO 16422:2006)
ISO/DIS 17484-1 Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
2012-01-24
(Revision of ISO 17484-1:2006, ISO 17484-1:2006/Cor 1:2008)
TC 156 Corrosion of metals and alloys
ISO/DIS 7539-11 Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
2012-01-26
ISO/DIS 21601 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
2012-01-26
TC 172 Optics and photonics
ISO/DIS 10685-2 * Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information
2012-01-05
ISO/DIS 10685-3 * Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical information
2012-01-05
ISO/DIS 11979-1 * Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary 2012-01-12(Revision of ISO 11979-1:2006)
ISO/DIS 11979-3 * Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods
2012-01-12
(Revision of ISO 11979-3:2006)
ISO 11979- * Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — 2012-01-12
4:2008/DAmd 1 Amendment 1
TC 194 Biological evaluation of medical devices
ISO/DIS 10993-3 * Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
2012-01-05
(Revision of ISO 10993-3:2003)
TC 199 Safety of machinery
ISO/DIS 13856-1 * Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
2012-01-26
(Revision of ISO 13856-1:2001)
TC 206 Fine ceramics
ISO/DIS 13383-1 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 1: Determination of grain size and size distribution
2012-01-19
ISO/DIS 13383-2 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 2: Determination of phase volume fraction by evaluation of micrographs
2012-01-19
TC 213 Dimensional and geometrical product specifications and verification
ISO/DIS 1938-1 * Geometrical product specifications (GPS) - Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
2012-01-19
(Revision of ISO/R 1938:1971)
ISO/DIS 25178-70 * Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Physical measurement standards
2012-01-19
ISO/DIS 25178-603.2
* Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
2011-10-26
JTC 1 Information technology
ISO/IEC DIS 17568 Information technology — Telecommunications and information exchange between systems — Close proximity electric induction wireless communications
2012-01-09
ISO/IEC DIS 17569 Information technology — Telecommunications and information exchange between systems — Procedure for the registration of assigned numbers for ISO/IEC 17568
2012-01-09
ISO/IEC 10918-4:1999/DAmd 1
Information technology — Digital compression and coding of continuous-tone still images: Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Registration Authorities (REGAUT) — Part 4: — Amendment 1: Application specific marker list
2012-01-31
ISO/IEC DIS 10918-6
Information technology — Digital compression and coding of continuous-tone still images: Application to printing systems — Part 6:
2012-01-20
ISO/IEC 13818-1:2007/DAmd 7
Information technology — Generic coding of moving pictures and associated audio information: Systems — Part 1: — Amendment 7: Signalling of stereoscopic video in MPEG-2 systems
2012-01-17
ISO/IEC 14496-3:2009/DAmd 3
Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3: Transport of unified speech and audio coding (USAC)
2012-01-31
ISO/IEC 14496-5:2001/DAmd 31
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 31: Reference software for efficient representation of 3D meshes with multiple attributes
2012-01-20
ISO/IEC 14496-22:2009/DAmd 2
Information technology — Coding of audio-visual objects — Part 22: Open Font Format — Amendment 2: Additional script and language tags
2012-01-31
ISO/IEC 14496-27:2009/DAmd 4
Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes
2012-01-20
ISO/IEC DIS 14496-28
Information technology — Coding of audio-visual objects — Part 28: Composite font representation
2012-01-20
ISO/IEC 15444-2:2004/DAmd 4
Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 4: Block coder extension
2012-01-31
ISO/IEC 23000-12:2010/DAmd 2
Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format — Amendment 2: Compact representation of dynamic volume change and audio equalization
2012-01-20
ISO/IEC 23003-2:2010/DAmd 1
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 1: SAOC conformance
2012-01-31
ISO/IEC 23003-2:2010/DAmd 2
Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 2: SAOC reference software
2012-01-31
ISO/IEC DIS 23006-1
Information technology — Multimedia service platform technologies — Part 1: Architecture
2012-01-23
(Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011)
ISO/IEC DIS 23007-2
Information technology — Rich media user interfaces — Part 2: Advanced user interaction (AUI) interfaces
2012-01-20
ISO/IEC DIS 29174-2
Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2: Registration procedures
2012-01-30
(Revision of ISO/IEC CD 29174)
ISO/IEC DIS 2382-37
Information technology — Vocabulary — Part 37: Harmonized biometric vocabulary 2012-01-09
ISO/IEC DIS 19794-11.2
Information technology — Biometric data interchange formats — Part 11: Signature/sign processed dynamic data
2012-01-31
ISO/IEC DIS 29109-5
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 5: Face image data
2012-01-09
(Revision of ISO/IEC 29109-5:2011)
FDIS circulated
Period from 01 August to 31 August 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2 Fasteners
ISO/FDIS 4753 * Fasteners — Ends of parts with external ISO metric thread 2011-10-05
(Revision of ISO 4753:1999)
TC 6 Paper, board and pulps
ISO/FDIS 2493-2 * Paper and board — Determination of resistance to bending — Part 2: Taber-type tester
2011-10-26
(Revision of ISO 2493:1992)
TC 21 Equipment for fire protection and fire fighting
ISO/FDIS 15779 * Condensed aerosol fire extinguishing systems — Requirements and test methods for components and system design, installation and maintenance — General requirements
2011-10-13
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 11783-4 * Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 4: Network layer
2011-10-12
(Revision of ISO 11783-4:2001)
TC 34 Food products
ISO/FDIS 14470 * Food irradiation — Requirements for the development, validation and routine control of the ionizing radiation used for the treatment of food
2011-10-23
ISO/FDIS 7970 * Wheat (Triticum aestivum L.) — Specification 2011-10-13(Revision of ISO 7970:2000)
ISO/FDIS 3972 * Sensory analysis — Methodology — Method of investigating sensitivity of taste 2011-10-04(Revision of ISO 3972:1991)
TC 35 Paints and varnishes
ISO/FDIS 2431 * Paints and varnishes — Determination of flow time by use of flow cups 2011-10-26(Revision of ISO 2431:1993, ISO 2431:1993/Cor 1:1994, ISO 2431:1993/Cor 2:1999)
ISO/FDIS 7783 * Paints and varnishes — Determination of water-vapour transmission properties — Cup method
2011-10-19
(Revision of ISO 7783-1:1996, ISO 7783-2:1999, ISO 7783-1:1996/Cor 1:1998)
TC 38 Textiles
ISO/FDIS 2959 * Textiles — Woven fabric descriptions 2011-10-12(Revision of ISO 2959:1973)
TC 41 Pulleys and belts (including veebelts)
ISO/FDIS 254 * Belt drives — Pulleys — Quality, finish and balance 2011-10-27(Revision of ISO 254:1998)
TC 45 Rubber and rubber products
ISO/FDIS 34-2 * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
2011-10-23
(Revision of ISO 34-2:2007)
ISO/FDIS 1827 * Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
2011-10-27
(Revision of ISO 1827:2007)
ISO/FDIS 2921 * Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
2011-10-04
(Revision of ISO 2921:2005)
ISO/FDIS 7267-3 * Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method
2011-10-25
(Revision of ISO 7267-3:2007)
ISO/FDIS 13226 * Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
2011-10-13
(Revision of ISO 13226:2005)
ISO/FDIS 124 * Latex, rubber — Determination of total solids content 2011-11-01(Revision of ISO 124:2008)
ISO/FDIS 2475 * Chloroprene rubber (CR) — General-purpose types — Evaluation procedure 2011-10-13(Revision of ISO 2475:1999, ISO 2475:1999/Cor 1:2001, ISO 2475:1999/Amd 1:2005)
ISO/FDIS 8511 * Rubber compounding ingredients — Carbon black — Determination of pellet size distribution
2011-10-06
(Revision of ISO 8511:1995)
ISO/FDIS 11852 * Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration
2011-10-16
TC 46 Information and documentation
ISO/FDIS 30300 * Information and documentation — Management systems for records — Fundamentals and vocabulary
2011-10-16
ISO/FDIS 30301 * Information and documentation — Management systems for records — Requirements 2011-10-16
TC 59 Buildings and civil engineering works
ISO/FDIS 21929-1 * Sustainability in building construction — Sustainability indicators — Part 1: Framework for the development of indicators and a core set of indicators for buildings
2011-10-24
(Revision of ISO/TS 21929-1:2006)
TC 61 Plastics
ISO/FDIS 1043-1 * Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
2011-10-12
(Revision of ISO 1043-1:2001, ISO 1043-1:2001/DAmd 1.2)
ISO/FDIS 1043-2 * Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials 2011-10-12(Revision of ISO 1043-2:2000)
ISO/FDIS 23559 Plastics — Film and sheeting — Guidance on the testing of thermoplastic films 2011-10-30
(Revision of ISO 23559:2007)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 21809-3:2008/FDAmd 1
* Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1
2011-10-27
ISO/FDIS 13503-1 * Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids
2011-10-12
(Revision of ISO 13503-1:2003, ISO 13503-1:2003/Cor 1:2005)
ISO/FDIS 13706 * Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers 2011-10-26
(Revision of ISO 13706:2005)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/FDIS 17874-3 * Remote handling devices for radioactive materials — Part 3: Electrical master-slave manipulators
2011-10-13
TC 92 Fire safety
ISO 5658-2:2006/FDAmd 1
* Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1
2011-10-17
TC 118 Compressors and pneumatic tools, machines and equipment
ISO/FDIS 11148-1 * Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners
2011-10-12
ISO/FDIS 11148-2 * Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools
2011-10-12
ISO/FDIS 11148-5 * Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills
2011-10-12
ISO/FDIS 11148-8 * Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers
2011-10-12
ISO/FDIS 11148-9 * Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders 2011-10-12
ISO/FDIS 11148-10 * Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools
2011-10-12
ISO/FDIS 11148-11 * Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears
2011-10-12
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 8835-7 * Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
2011-10-18
TC 131 Fluid power systems
ISO/FDIS 15524 * Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
2011-10-19
ISO/FDIS 4397 * Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
2011-10-04
(Revision of ISO 4397:1993)
ISO/FDIS 16873 * Hydraulic fluid power — Pressure switches — Mounting surfaces 2011-10-17(Revision of ISO 16873:2002, ISO 16873:2002/Amd 1:2005)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 11296-7 * Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
2011-10-03
ISO/FDIS 19892 * Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
2011-10-17
TC 147 Water quality
ISO/FDIS 13162 * Water quality — Determination of carbon 14 activity — Liquid scintillation counting method
2011-10-06
TC 197 Hydrogen technologies
ISO/FDIS 22734-2 * Hydrogen generators using water electrolysis process — Part 2: Residential applications
2011-10-27
(Revision of ISO/CD 22734)
TC 202 Microbeam analysis
ISO/FDIS 13067 * Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
2011-10-20
TC 215 Health informatics
ISO/HL7 FDIS 27953-1
* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 1: Framework for adverse event reporting
2011-10-12
ISO/HL7 FDIS 27953-2
* Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 2: Human pharmaceutical reporting requirements for ICSR
2011-10-12
TC 223 Societal security
ISO/FDIS 22320 * Societal security — Emergency management — Requirements for command and control
2011-10-23
JTC 1 Information technology
ISO/IEC FDIS 14908-1
* Interconnection of information technology equipment — Control network protocol — Part 1: Protocol stack
2011-10-02
ISO/IEC FDIS 14908-2
* Interconnection of information technology equipment — Control network protocol — Part 2: Twisted pair communication
2011-10-02
ISO/IEC FDIS 14908-3
* Interconnection of information technology equipment — Control network protocol — Part 3: Power line channel specification
2011-10-02
ISO/IEC FDIS 14908-4
* Interconnection of information technology equipment — Control network protocol — Part 4: IP communication
2011-10-02
ISO/IEC FDIS 16504 * Information technology — Telecommunications and information exchange between systems — MAC and PHY for operation in TV white space
2011-10-23
ISO/IEC FDIS 14776-372
* Information technology — Small Computer System Interface (SCSI) — Part 372: SCSI Enclosure Services - 2 (SES-2)
2011-10-03
ISO/IEC FDIS 9797-3 * Information technology — Security techniques — Message Authentication Codes (MACs) — Part 3: Mechanisms using a universal hash-function
2011-10-04
ISO/IEC FDIS 11770-5
* Information technology — Security techniques — Key management — Part 5: Group key management
2011-10-24
ISO/IEC FDIS 18031 * Information technology — Security techniques — Random bit generation 2011-10-06(Revision of ISO/IEC 18031:2005, ISO/IEC 18031:2005/Cor 1:2009)
ISO/IEC FDIS 27007 * Information technology — Security techniques — Guidelines for information security management systems auditing
2011-10-04
ISO/IEC FDIS 29128 * Information technology — Security techniques — Verification of cryptographic protocols
2011-10-17
ISO/IEC FDIS 29192-2
* Information technology — Security techniques — Lightweight cryptography — Part 2: Block ciphers
2011-10-27
ISO/IEC FDIS 23005-7
* Information technology — Media context and control — Part 7: Conformance and reference software
2011-10-04
ISO/IEC FDIS 15415 * Information technology — Automatic identification and data capture techniques — Bar code symbol print quality test specification — Two-dimensional symbols
2011-10-17
(Revision of ISO/IEC 15415:2004, ISO/IEC 15415:2004/Cor 1:2008)
ISO/IEC FDIS 12785-2
* Information technology — Learning, education, and training — Content packaging — Part 2: XML binding
2011-10-24
Standards published
New International Standards published between 01 August and 31 August 2011
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO 14271:2011 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
D
TC 2 Fasteners
ISO 1580:2011 Slotted pan head screws — Product grade A C
ISO 2009:2011 Slotted countersunk flat head screws — Product grade A C
ISO 2010:2011 Slotted raised countersunk head screws — Product grade A C
ISO 4766:2011 Slotted set screws with flat point C
ISO 7045:2011 Pan head screws with type H or type Z cross recess — Product grade A C
ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8
C
ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
C
ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A
C
TC 4 Rolling bearings
ISO 12090-1:2011
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
H
ISO 12090-2:2011
Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5
E
TC 6 Paper, board and pulps
ISO 776:2011 Pulps — Determination of acid-insoluble ash C
ISO 15320:2011 Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract E
ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water C
TC 8 Ships and marine technology
ISO 21070:2011 * Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage
J
ISO 13122:2011 * Ships and marine technology — Launching appliances for davit-launched liferafts E
ISO 14409:2011 Ships and marine technology — Ship launching air bags F
TC 10 Technical product documentation
ISO 29845:2011 * Technical product documentation — Document types U
TC 20 Aircraft and space vehicles
ISO 10795:2011 * Space systems — Programme management and quality — Vocabulary R
ISO 14620-2:2011
* Space systems — Safety requirements — Part 2: Launch site operations H
TC 21 Equipment for fire protection and fire fighting
ISO 7203-3:2011 * Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids
R
TC 22 Road vehicles
ISO 12405-1:2011
* Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 1: High-power applications
U
TC 23 Tractors and machinery for agriculture and forestry
ISO 12809:2011 Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test methods
F
ISO 8224-1:2003/Amd 1:2011
Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods — Amendment 1
XZ
ISO 24631-6:2011
Radiofrequency identification of animals — Part 6: Representation of animal identification information (visual display/data transfer)
C
TC 28 Petroleum products and lubricants
ISO 3405:2011 Petroleum products — Determination of distillation characteristics at atmospheric pressure R
ISO 18132-1:2011
* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
L
ISO 18132-3:2011
* Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
M
TC 29 Small tools
ISO 2238:2011 Machine bridge reamers C
ISO 6261:2011 Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation F
TC 31 Tyres, rims and valves
ISO 4223-1:2002/Amd 1:2011
Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1
XZ
ISO 15222:2011 Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres
K
TC 34 Food products
ISO 3632-1:2011 * Spices — Saffron (Crocus sativus L.) — Part 1: Specification D
ISO 16140:2003/Amd 1:2011
Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods — Amendment 1
XZ
ISO 6493:2000 Animal feeding stuffs — Determination of starch content — Polarimetric method E
TC 35 Paints and varnishes
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of
C
degree of chalking by tape method
ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
D
ISO 6272-2:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
C
TC 37 Terminology and other language and content resources
ISO 24614-2:2011
* Language resource management — Word segmentation of written texts — Part 2: Word segmentation for Chinese, Japanese and Korean
S
TC 38 Textiles
ISO 14184-1:2011
Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method)
D
ISO 14184-2:2011
Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method)
F
ISO/TR 24697:2011
* Textiles and textile products — Guidelines on the determination of the precision of a standard test method by interlaboratory trials
H
TC 42 Photography
ISO 3665:2011 * Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications
E
TC 44 Welding and allied processes
ISO 10863:2011 Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)
P
TC 45 Rubber and rubber products
ISO 4671:2007/Amd 1:2011
Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is measured
XZ
ISO 6801:1983/Amd 1:2011
Rubber or plastics hoses — Determination of volumetric expansion — Amendment 1: Deletion of alcohol as pressurizing fluid
XZ
ISO 1853:2011 * Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
E
ISO 5600:2011 * Rubber — Determination of adhesion to rigid materials using conical shaped parts D
ISO 5603:2011 * Rubber, vulcanized — Determination of adhesion to wire cord H
ISO 2303:2011 Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures
G
ISO 5794-3:2011 * Rubber compounding ingredients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
D
TC 46 Information and documentation
ISO 15511:2011 Information and documentation — International standard identifier for libraries and related organizations (ISIL)
D
ISO 25964-1:2011
* Information and documentation — Thesauri and interoperability with other vocabularies — Part 1: Thesauri for information retrieval
XC
ISO/TR 23081-3:2011
* Information and documentation — Managing metadata for records — Part 3: Self-assessment method
D
TC 51 Pallets for unit load method of materials handling
ISO 13194:2011 * Box pallets — Principal requirements and test methods L
TC 61 Plastics
ISO 25762:2009 Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
N
ISO 11357-3:2011
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
C
ISO 11357-6:2008
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
F
ISO 10640:2011 Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
N
ISO 4901:2011 * Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
E
ISO 3598:2011 Textile glass — Yarns — Basis for a specification B
TC 69 Applications of statistical methods
ISO 3951-4:2011 * Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels
M
ISO 13053-1:2011
Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology P
ISO 13053-2:2011
Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques T
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/TR 16475:2011
Guidelines for the repair of water-leakage cracks in concrete structures H
TC 79 Light metals and their alloys
ISO 7599:2010 Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on aluminium
L
ISO 11707:2011 * Magnesium and its alloys — Determination of lead and cadmium D
ISO 6361-1:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
E
ISO 6361-2:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
U
ISO 6361-3:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
B
ISO 6361-4:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
F
ISO 6361-5:2011 * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
C
TC 83 Sports and recreational equipment
ISO 7795:2011 Cross-country skis — Ski-binding screws — Test methods C
TC 92 Fire safety
ISO 12136:2011 * Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
T
ISO 19706:2011 Guidelines for assessing the fire threat to people F
TC 94 Personal safety -- Protective clothing and equipment
ISO 27065:2011 Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides
J
ISO 16900-4:2011
* Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
H
ISO/TS 16976-3:2011
* Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment
L
TC 106 Dentistry
ISO 24234:2004/Amd 1:2011
Dentistry — Mercury and alloys for dental amalgam — Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury
XZ
ISO 1797-1:2011 Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals E
ISO 7711-2:2011 Dentistry — Rotary diamond instruments — Part 2: Discs F
ISO 7494-1:2011 Dentistry — Dental units — Part 1: General requirements and test methods D
TC 108 Mechanical vibration, shock and condition monitoring
ISO 16063-41:2011
* Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers
S
TC 112 Vacuum technology
ISO 27893:2011 * Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
H
TC 121 Anaesthetic and respiratory equipment
ISO 80601-2-13:2011
* Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
X
TC 130 Graphic technology
ISO 15930-8:2010/Cor 1:2011
* Graphic technology — Prepress digital data exchange using PDF — Part 8: Partial exchange of printing data using PDF 1.6 (PDF/X-5) — Technical Corrigendum 1
free
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 9311-2:2011 Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength D
ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
B
TC 142 Cleaning equipment for air and other gases
ISO 29464:2011 * Cleaning equipment for air and other gases — Terminology M
TC 146 Air quality
ISO 25139:2011 Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography
J
TC 147 Water quality
ISO 18857-2:2009
Water quality — Determination of selected alkylphenols — Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
J
TC 150 Implants for surgery
ISO 5834-2:2011 * Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms C
TC 155 Nickel and nickel alloys
ISO 22033:2011 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
F
TC 159 Ergonomics
ISO 26800:2011 Ergonomics — General approach, principles and concepts J
TC 160 Glass in building
ISO 12543-1:2011
Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts
D
ISO 12543-2:2011
Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass
C
ISO 12543-3:2011
Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass C
ISO 12543-4:2011
Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
F
ISO 12543-5:2011
Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing
E
ISO 12543-6:2011
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance C
TC 164 Mechanical testing of metals
ISO 12111:2011 * Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
M
TC 172 Optics and photonics
ISO 9344:2011 * Microscopes — Graticules for eyepieces B
ISO 10943:2011 Ophthalmic instruments — Indirect ophthalmoscopes B
ISO/TR 21254-4:2011
* Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 4: Inspection, detection and measurement
K
TC 173 Assistive products for persons with disability
ISO 24415-2:2011
* Tips for assistive products for walking — Requirements and test methods — Part 2: Durability of tips for crutches
C
TC 201 Surface chemical analysis
ISO/TR 14187:2011
* Surface chemical analysis — Characterization of nanostructured materials R
ISO 14701:2011 * Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness
H
TC 206 Fine ceramics
ISO 28703:2011 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal-shock resistance of porous ceramics
C
ISO 28704:2011 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending fatigue of porous ceramics at room temperature
D
TC 211 Geographic information/Geomatics
ISO 19110:2005 Geographic information — Methodology for feature cataloguing U
TC 213 Dimensional and geometrical product specifications and verification
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
X
TC 215 Health informatics
ISO/HL7 10781:2009
Electronic Health Record-System Functional Model, Release 1.1 XD
TC 219 Floor coverings
ISO 10581:2011 * Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification D
ISO 24343-2:2011
* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term residual indentation of resilient floor covering
B
ISO 24343-3:2011
* Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
B
TC 229 Nanotechnologies
ISO/TS 10868:2011
* Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
K
TC 234 Fisheries and aquaculture
ISO 12877:2011 * Traceability of finfish products — Specification on the information to be recorded in farmed finfish distribution chains
S
TMB Technical Management Board
IWA 9:2011 Framework for managing sustainable development in business districts N
JTC 1 Information technology
ISO/IEC 40210:2011
* Information technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)
A
ISO/IEC 40220:2011
* Information technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition) A
ISO/IEC 40230:2011
* Information technology — W3C SOAP Message Transmission Optimization Mechanism A
ISO/IEC 40240:2011
* Information technology — W3C Web Services Addressing 1.0 — Core A
ISO/IEC 40250:2011
* Information technology — W3C Web Services Addressing 1.0 — SOAP Binding A
ISO/IEC 40260:2011
* Information technology — W3C Web Services Addressing 1.0 — Metadata A
ISO/IEC 40270:2011
* Information technology — W3C Web Services Policy 1.5 — Framework A
ISO/IEC 40280:2011
* Information technology — W3C Web Services Policy 1.5 — Attachment A
ISO/IEC 14651:2011
Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
S
ISO/IEC 18052:2011
* Information technology — Telecommunications and information exchange between systems — Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
XK
ISO/IEC 14143-2:2011
* Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
N
ISO/IEC TR 24748-2:2011
* Systems and software engineering — Life cycle management — Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes)
W
ISO/IEC TR 24748-3:2011
* Systems and software engineering — Life cycle management — Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)
XA
ISO/IEC TR 29110-1:2011
* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview G
ISO/IEC TR 29110-3:2011
* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3: Assessment guide
C
ISO/IEC 29341-14-3:2011
* Information technology — UPnP Device Architecture — Part 14-3: Audio Video Device Control Protocol — Level 3 — Media Server Device
K
ISO/IEC 29341-16-1:2011
* Information technology — UPnP Device Architecture — Part 16-1: Low Power Device Control Protocol — Low Power Architecture
Q
ISO/IEC 29341-17-1:2011
* Information technology — UPnP Device Architecture — Part 17-1: Quality of Service Device Control Protocol — Level 3 — Quality of Service Architecture
R
ISO/IEC 29341-18-1:2011
* Information technology — UPnP Device Architecture — Part 18-1: Remote Access Device Control Protocol — Remote Access Architecture
K
ISO/IEC 29341-18-2:2011
* Information technology — UPnP Device Architecture — Part 18-2: Remote Access Device Control Protocol — Remote Access Client Device
C
ISO/IEC 29341-18-3:2011
* Information technology — UPnP Device Architecture — Part 18-3: Remote Access Device Control Protocol — Remote Access Server Device
C
ISO/IEC 29341-18-4:2011
* Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control Protocol — Remote Access Discovery Agent Device
C
ISO/IEC 29341-19-1:2011
* Information technology — UPnP Device Architecture — Part 19-1: Solar Protection Blind Device Control Protocol — Solar Protection Blind Device
B
ISO/IEC 29341-16-10:2011
* Information technology — UPnP Device Architecture — Part 16-10: Low Power Device Control Protocol — Low Power Proxy Service
F
ISO/IEC 29341-16-11:2011
* Information technology — UPnP Device Architecture — Part 16-11: Low Power Device Control Protocol — Low Power Service
G
ISO/IEC 29341-17-11:2011
* Information technology — UPnP Device Architecture — Part 17-11: Quality of Service Device Control Protocol — Level 3 — Quality of Service Manager Service
X
ISO/IEC 29341-17-12:2011
* Information technology — UPnP Device Architecture — Part 17-12: Quality of Service Device Control Protocol — Level 3 — Quality of Service Policy Holder Service
P
ISO/IEC 29341-17-13:2011
* Information technology — UPnP Device Architecture — Part 17-13: Quality of Service Device Control Protocol — Level 3 — Quality of Service Device Service — Underlying Technology Interfaces
H
ISO/IEC 29341-18-10:2011
* Information technology — UPnP Device Architecture — Part 18-10: Remote Access Device Control Protocol — Remote Access Inbound Connection Configuration Service
G
ISO/IEC 29341-18-11:2011
* Information technology — UPnP Device Architecture — Part 18-11: Remote Access Device Control Protocol — Remote Access Discovery Agent Service
F
ISO/IEC 29341-18-12:2011
* Information technology — UPnP Device Architecture — Part 18-12: Remote Access Device Control Protocol — Remote Access Discovery Agent Synchronization Service
K
ISO/IEC 29341-18-13:2011
* Information technology — UPnP Device Architecture — Part 18-13: Remote Access Device Control Protocol — Remote Access Transport Agent Configuration Service
S
ISO/IEC 27035:2011
* Information technology — Security techniques — Information security incident management W
ISO/IEC 24800-5:2011
* Information technology — JPSearch — Part 5: Data interchange format between image repositories
F
ISO/IEC 24753:2011
* Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries
W
ISO/IEC 24754-1:2008/Cor 1:2011
* Information technology — Document description and processing languages — Minimum requirements for specifying document rendering systems — Part 1: Feature specifications for document rendering systems — Technical Corrigendum 1
free
ISO/IEC 29500-1:2011
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 1: Fundamentals and Markup Language Reference
XL
ISO/IEC 29500-2:2011
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 2: Open Packaging Conventions
XL
ISO/IEC 29500-3:2011
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 3: Markup Compatibility and Extensibility
XL
ISO/IEC 29500-4:2011
* Information technology — Document description and processing languages — Office Open XML File Formats — Part 4: Transitional Migration Features
XL
Standards confirmed
The following International Standards are confimred for a five year period:
TC 6 Paper, board and pulps
ISO 22891:2007
TC 45 Rubber and rubber products
ISO 7725:1991 (reconfirmed)
TC 77 Products in fibre reinforced cement
ISO 390:1993 (reconfirmed)
TC 87 Cork
ISO 2190:1998 (reconfirmed)
TC 110 Industrial trucks
ISO 22877:2004
ISO 22878:2004
ISO 22880:2004
ISO 22882:2004
ISO 22883:2004
ISO 22884:2004
TC 112 Vacuum technology
ISO 1608-1:1993 (reconfirmed)
ISO 1608-2:1989 (reconfirmed)
ISO 3529-1:1981 (reconfirmed)
ISO 3669:1986 (reconfirmed)
ISO/TS 3669-2:2007
TC 131 Fluid power systems
ISO 4392-3:1993 (reconfirmed)
ISO 6403:1988 (reconfirmed)
ISO 17559:2003
TC 146 Air quality
ISO 10155:1995 (reconfirmed)
ISO 10780:1994 (reconfirmed)
ISO 4226:2007
TC 168 Prosthetics and orthotics
ISO 8549-1:1989 (reconfirmed)
ISO 8549-2:1989 (reconfirmed)
ISO 8549-3:1989 (reconfirmed)
ISO 10328:2006
ISO 13404:2007
ISO 22523:2006
ISO 22675:2006
TC 171 Document management applications
ISO 6200:1999 (reconfirmed)
TC 195 Building construction machinery and equipment
ISO 18650-1:2004
ISO 21573-1:2006
TC 222 Personal financial planning
ISO 22222:2005
JTC 1 Information technology
ISO/IEC 7942-1:1994 (reconfirmed)
ISO/IEC 8806-4:1991 (reconfirmed)
ISO/IEC 9637-1:1994 (reconfirmed)
ISO/IEC 9638-3:1994 (reconfirmed)
ISO/IEC 12087-2:1994 (reconfirmed)
Standards withdrawn
Period from 01 August to 31 August 2011
TC 34 Food products
ISO/TS 3632-1:2003 (replaced by ISO 3632-1:2011)
TC 46 Information and documentation
ISO 2788:1986 (replaced by ISO 25964-1:2011)
ISO 5964:1985 (replaced by ISO 25964-1:2011)
TC 112 Vacuum technology
ISO/TS 27893:2009 (replaced by ISO 27893:2011)
TC 121 Anaesthetic and respiratory equipment
ISO 8835-2:2007 (replaced by ISO 80601-2-13:2011)
ISO 8835-3:2007 (replaced by ISO 80601-2-13:2011)
ISO 8835-4:2004 (replaced by ISO 80601-2-13:2011)
ISO 8835-5:2004 (replaced by ISO 80601-2-13:2011)
IEC 60601-2-13:2003 (replaced by ISO 80601-2-13:2011)
TC 142 Cleaning equipment for air and other gases
ISO 3649:1980 (replaced by ISO 29464:2011)
JTC 1 Information technology
ISO/IEC TR 15271:1998
(replaced by ISO/IEC TR 24748-3:2011)
ISO/IEC TR 19760:2003
(replaced by ISO/IEC TR 24748-2:2011)
ISO/IEC TR 18044:2004
(replaced by ISO/IEC 27035:2011)
ISO/IEC 29500-1:2008/Amd 1:2010
(replaced by )
ISO/IEC 29500-4:2008/Amd 1:2010
(replaced by )
Meeting calendar
(update at 01 August 2011)
Meetings called for the month of July are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September 2011
1-3 Kassel (Germany)
TC 180 Solar energy
2 Kassel (Germany)
TC 180/SC 4 Solar energy/Systems - Thermal performance, reliability and durability
7-9 Kobe (Japan) TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
8 Paris (France) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
8-9 Edinburgh (United Kingdom)
TC 24/SC 4 Particle characterization including sieving/Particle characterization
10-17 Shanghai (China) JTC 1/SC 36 Information technology/Information technology for learning, education and training
12-14 Chicago (USA) TC 205 Building environment design
12-16 Vienna (Austria) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock
12-16 Florianopolis (Brazil)
TC 150 Implants for surgery
12-16 London (United Kingdom)
TC 262 Project committee: Risk management
13 Florianopolis (Brazil)
TC 150/SC 1 Implants for surgery/Materials
13 Florianopolis (Brazil)
TC 150/SC 7 Implants for surgery/Tissue-engineered medical products
13-14 Florianopolis (Brazil)
TC 150/SC 5 Implants for surgery/Osteosynthesis and spinal devices
13-15 Moscow (Russian Federation)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
14 Geneva (Switzerland)
TC 154 Processes, data elements and documents in commerce, industry and administration
14 Brescia (Italy) TC 201/SC 9 Surface chemical analysis/Scanning probe microscopy
14-15 Helsinki (Finland) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
14-15 Chicago (USA) TC 163 Thermal performance and energy use in the built environment
15 Florianopolis (Brazil)
TC 150/SC 2 Implants for surgery/Cardiovascular implants and extracorporeal systems
15 Florianopolis (Brazil)
TC 150/SC 4 Implants for surgery/Bone and joint replacements
15 Florianopolis (Brazil)
TC 150/SC 6 Implants for surgery/Active implants
15 Brescia (Italy) TC 201/SC 1 Surface chemical analysis/Terminology
15 Brescia (Italy) TC 201/SC 2 Surface chemical analysis/General procedures
15-17 Brescia (Italy) TC 201 Surface chemical analysis
16 Brescia (Italy) TC 201/SC 4 Surface chemical analysis/Depth profiling
16 Brescia (Italy) TC 201/SC 5 Surface chemical analysis/Auger electron spectroscopy
16 Brescia (Italy) TC 201/SC 7 Surface chemical analysis/X-ray photoelectron spectroscopy
16-22 Berlin (Germany) TC 130 Graphic technology
17 Brescia (Italy) TC 201/SC 3 Surface chemical analysis/Data management and treatment
17 Brescia (Italy) TC 201/SC 8 Surface chemical analysis/Glow discharge spectroscopy
18 Trento (Italy) TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry
18-24 Phoenix (USA) TC 106 Dentistry
19 Chicago (USA) TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
19-20 Copenhagen (Denmark)
JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
19-20 La Plaine St-Denis (France)
TC 164/SC 3 Mechanical testing of metals/Hardness testing
19-20 New Delhi (India) TMB Technical Management Board
19-21 San Francisco (USA)
TC 243 Project Committee: Consumer product safety
19-21 London (United Kingdom)
TC 246 Project committee: Anti-counterfeiting tools
19-22 Paris (France) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
19-23 Seoul (Korea, Republic of)
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
19-23 Bali (Indonesia) TC 165 Timber structures
19-23 Adelaide (Australia)
TC 190 Soil quality
19-23 Adelaide (Australia)
TC 190/SC 2 Soil quality/Sampling
20 Chicago (USA) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting systems using foam and powder
20 Berlin (Germany) TC 29/SC 8 Small tools/Tools for pressing and moulding
20-22 Paris (France) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing
20-23 Paris (France) TC 59/SC 8 Buildings and civil engineering works/Sealants
20-23 Gaithersburg (USA)
TC 172/SC 5 Optics and photonics/Microscopes and endoscopes
21 Chicago (USA) TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
21 Paris (France) TC 164/SC 2 Mechanical testing of metals/Ductility testing
21 Adelaide (Australia)
TC 190/SC 1 Soil quality/Evaluation of criteria, terminology and codification
21-22 Chicago (USA) TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
21-23 New Delhi (India) GA General Assembly
21-23 Amsterdam (Netherlands)
TC 225 Market, opinion and social research
22 Chicago (USA) TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components
22 Singapore (Singapore)
TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
22 La Plaine St- TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on
Denis (France) aluminium
22 La Plaine St-Denis (France)
TC 79/SC 6 Light metals and their alloys/Wrought aluminium and aluminium alloys
22 La Plaine St-Denis (France)
* TC 79/SC 9 Light metals and their alloys/Symbolization
22 Sao Paulo (Brazil)
TC 142 Cleaning equipment for air and other gases
22 Adelaide (Australia)
TC 190/SC 4 Soil quality/Biological methods
22 Adelaide (Australia)
TC 190/SC 7 Soil quality/Soil and site assessment
22 Beijing (China) TC 213 Dimensional and geometrical product specifications and verification
22-23 Las Vegas (USA) TC 159/SC 4 Ergonomics/Ergonomics of human-system interaction
22-23 La Plaine St-Denis (France)
TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
22-23 San Francisco (USA)
TC 240 Project Committee: Product recall
23 Chicago (USA) TC 21 Equipment for fire protection and fire fighting
23 La Plaine St-Denis (France)
TC 79 Light metals and their alloys
23 Adelaide (Australia)
TC 190/SC 3 Soil quality/Chemical methods and soil characteristics
24 New Delhi (India) COUNCIL Council
25-26 London (United Kingdom)
TC 254 Safety of amusement rides and amusement devices
26 Bangkok (Thailand)
TC 44/SC 9 Welding and allied processes/Health and safety
26-27 Geneva (Switzerland)
TAG 8 Building
26-30 Kharkov (Ukraine)
TC 218 Timber
27 Valencia (Spain) * IULTCS International Union of Leather Technologists and Chemists Societies
28 Kuala Lumpur (Malaysia)
TC 61/SC 4 Plastics/Burning behaviour
28 La Plaine St-Denis (France)
TC 206 Fine ceramics
29 Gothenburg (Sweden)
TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability
29 Vienna (Austria) TC 146/SC 3 Air quality/Ambient atmospheres
29 Vienna (Austria) TC 146/SC 6 Air quality/Indoor air
29-30 Riverside (USA) TC 58/SC 2 Gas cylinders/Cylinder fittings
30 Busan (Korea, Republic of)
JTC 1/SC 34 Information technology/Document description and processing languages
3rd Quarter 2011
Sapporo (Japan)
**
TC 184/SC 1
Automation systems and integration/Physical device control
October 2011
3-7 London (United Kingdom)
TC 146/SC 2
Air quality/Workplace atmospheres
4-6 Dublin (Ireland)
TC 34/SC 17
Food products/Management systems for food safety
4-7 Sapporo (Japan)
TC 159/SC 5
Ergonomics/Ergonomics of the physical environment
5 Sydney (Australia)
TC 89/SC 1 Wood-based panels/Fibre boards
5 Sydney (Australia)
TC 89/SC 2 Wood-based panels/Particle boards
5-7 Songdo (Korea, Republic of)
JTC 1/SC 17 Information technology/Cards and personal identification
6 San Diego (USA)
* TC 79/SC 11
Light metals and their alloys/Titanium
6 San Antonio (USA)
* TC 92/SC 2 Fire safety/Fire containment
6-7 Geneva (Switzerland)
CASCO Committee on conformity assessment
7 Sydney (Australia)
TC 89 Wood-based panels
9 Beijing (China) TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance
9-14 Beijing (China) * TC 27 Solid mineral fuels
9-14 Tampa, Florida (USA)
* TC 204 Intelligent transport systems
10 Beijing (China) TC 27/SC 5 Solid mineral fuels/Methods of analysis
10-11
Milan (Italy) TC 209 Cleanrooms and associated controlled environments
10-14
Berlin (Germany)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
10-14
Dublin (Ireland)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
10-14
Bangkok (Thailand)
TC 157 Non-systemic contraceptives and STI barrier prophylactics
10-14
Berlin (Germany)
TC 160 Glass in building
10-14
Nanjing (China)
TC 193 Natural gas
10-14
Nanjing (China)
**
TC 193/SC 1
Natural gas/Analysis of natural gas
10-14
Washington, D.C (USA)
TC 251 Project committee: Asset management
11-12
Paris (France) TC 17/SC 20
Steel/General technical delivery conditions, sampling and mechanical testing methods
12-13
Bangalore (India)
TC 34/SC 15
Food products/Coffee
12-14
Okinawa (Japan)
TC 172/SC 3
Optics and photonics/Optical materials and components
13 Maryland (USA)
TC 22/SC 5 Road vehicles/Engine tests
13 Annapolis (USA)
TC 22/SC 7 Road vehicles/Injection equipment and filters for use on road vehicles
13 Annapolis (USA)
TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
13 Vienna (Austria)
TC 146/SC 1
Air quality/Stationary source emissions
13 Berlin (Germany)
TC 160/SC 1
Glass in building/Product considerations
13 Tokyo (Japan) TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
14 London (United Kingdom)
TC 25 Cast irons and pig irons
14 Berlin (Germany)
TC 160/SC 2
Glass in building/Use considerations
16-21
Suzhou (China) TC 184/SC 4
Automation systems and integration/Industrial data
17 Berlin (Germany)
TC 2/SC 7 Fasteners/Reference standards
19 Berlin (Germany)
TC 2/SC 12 Fasteners/Fasteners with metric internal thread
17-21
Yokohama (Japan)
TC 45 Rubber and rubber products
17-21
Alexandria (USA)
* TC 210 Quality management and corresponding general aspects for medical devices
18 Berlin (Germany)
TC 2/SC 11 Fasteners/Fasteners with metric external thread
18 Teddington (United Kingdom)
TC 202 Microbeam analysis
18-19
Beijing (China) TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
18-20
Seattle (USA) TC 20/SC 10
Aircraft and space vehicles/Aerospace fluid systems and components
18-20
Lisbon (Portugal)
TC 58/SC 3 Gas cylinders/Cylinder design
19 Berlin (Germany)
TC 2 Fasteners
20 Yokohama (Japan)
TC 45/SC 2 Rubber and rubber products/Testing and analysis
20 Ottawa (Canada)
TC 92/SC 3 Fire safety/Fire threat to people and environment
20 Beijing (China) TC 111 Round steel link chains, chain slings, components and accessories
20 Beijing (China) TC 111/SC 3
Round steel link chains, chain slings, components and accessories/Components and accessories
20-21
Berlin (Germany)
TC 2/SC 14 Fasteners/Surface coatings
21 Ottawa (Canada)
TC 92/SC 4 Fire safety/Fire safety engineering
21 Paris (France) TC 244 Industrial furnaces and associated processing equipment
24 London (United Kingdom)
TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts
24-25
Genoa (Italy) TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
24-25
Paris (France) TC 253 Project committee: Treated wastewater re-use for irrigation
24-28
Helsinki (Finland)
TC 8 Ships and marine technology
24-28
Amsterdam (Netherlands)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
24-28
Ottawa (Canada)
TC 181 Safety of toys
24-29
Beijing (China) TC 176 Quality management and quality assurance
25 Osaka (Japan) TC 38/SC 23
Textiles/Fibres and yarns
25 London (United Kingdom)
TC 41/SC 1 Pulleys and belts (including veebelts)/Friction
25 Amsterdam (Netherlands)
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
25-26
Genoa (Italy) **
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
25-27
Beltsville, Maryland (USA)
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
26 Osaka (Japan) TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
26 London (United Kingdom)
TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives
26 Amsterdam (Netherlands)
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
26 Amsterdam (Netherlands)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
26-28
Troy (USA) TC 22 Road vehicles
26-28
Nanjing (China)
* TC 70 Internal combustion engines
27 Osaka (Japan) TC 38 Textiles
27 London (United Kingdom)
* TC 41 Pulleys and belts (including veebelts)
27 Madrid (Spain) TC 87 Cork
27 Amsterdam (Netherlands)
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
27 Amsterdam (Netherlands)
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
27 Amsterdam (Netherlands)
* TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
27 Elda (Alicante) (Spain)
TC 216 Footwear
27-28
Genoa (Italy) TC 44 Welding and allied processes
27-28
Moscow (Russian Federation)
TC 178 Lifts, escalators and moving walks
28 Ottawa (Canada)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings and civil engineering works
31 Melbourne (Australia)
* JTC 1/SC 25 Information technology/Interconnection of information technology equipment
Oslo (Norway) **
TC 59/SC 14
Buildings and civil engineering works/Design life
London (United Kingdom)
**
TC 59/SC 15
Buildings and civil engineering works/Performance criteria for single family attached and detached dwellings
October-November 2011
21-4 Brussels (Belgium)
TC 92/SC 1 Fire safety/Fire initiation and growth
31-3 London (United Kingdom)
TC 46/SC 11
Information and documentation/Archives/records management
31-3 Bangkok (Thailand)
TC 238 Solid biofuels
31-4 Washington, D.C (USA)
TC 242 Energy Management
November 2011
2 Bangkok (Thailand)
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions
2 Bangkok (Thailand)
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
2-3 Houston (USA) * TC 67/SC 7 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Offshore structures
2-3 Winterthur (Switzerland)
TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
3 Kyoto (Japan) TC 33 Refractories
3 Bangkok (Thailand)
TC 123/SC 5
Plain bearings/Quality analysis and assurance
3 Bangkok (Thailand)
TC 123/SC 6
Plain bearings/Terms and common items
3-4 Washington, D.C (USA)
* TC 85/SC 6 Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
4 Troy (USA) TC 22/SC Road vehicles/Impact test procedures
10
4 Troy (USA) TC 22/SC 12
Road vehicles/Passive safety crash protection systems
4 Paris (France) TC 22/SC 21
Road vehicles/Electrically propelled road vehicles
4 Cincinnati (USA)
TC 60 Gears
4 Bangkok (Thailand)
TC 123 Plain bearings
4 Bangkok (Thailand)
TC 123/SC 7
Plain bearings/Special types of plain bearings
7-11 Osaka (Japan) TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
7-11 Beijing (China) TC 223 Societal security
7-12 San Diego (USA)
JTC 1 Information technology
10 Gaithersburg (USA)
TC 30/SC 7 Measurement of fluid flow in closed conduits/Volume methods including water meters
10 Sao Paulo (Brazil)
TC 250 Project committee: Sustainability in event management
10-11
Washington, D.C (USA)
TC 260 Human resource management
11 Venice (Italy) TC 227 Springs
14 Tel Aviv (Israel)
TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
14-18
Auckland (New Zealand)
* TC 217 Cosmetics
15-17
London (United Kingdom)
TC 189 Ceramic tile
17 Munich (Germany)
TC 44/SC 12
Welding and allied processes/Soldering materials
17-18
Pretoria (South Africa)
TC 211 Geographic information/Geomatics
18 Johannesburg (South Africa)
TC 229 Nanotechnologies
21-22
Berlin (Germany)
TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
22-23
Rome (Italy) TC 34/SC 4 Food products/Cereals and pulses
22-25
Boulogne sur Mer (France)
TC 234 Fisheries and aquaculture
23-24
Berlin (Germany)
TC 259 Project committee: Outsourcing
24 London (United Kingdom)
TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
24 Stellenbosch (South Africa)
TC 98/SC 2 Bases for design of structures/Reliability of structures
24 Stellenbosch (South Africa)
TC 98/SC 3 Bases for design of structures/Loads, forces and other actions
25 Stellenbosch (South Africa)
TC 98 Bases for design of structures
28-30
London (United Kingdom)
TC 20 Aircraft and space vehicles
30 La Plaine St-Denis (France)
* TC 147/SC 3
Water quality/Radiological methods
Pau (France) **
TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
(Jamaica) **
TC 93 Starch (including derivatives and by-products)
December 2011
2 Linz (Austria) **
TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
2 Brussels (Belgium)
TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection
2 La Plaine St-Denis (France)
TC 158 Analysis of gases
7-8 La Plaine St-Denis (France)
TC 17/SC 3 Steel/Steels for structural purposes
12-16
Sydney (Australia)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines
13-14
Heidelberg (Germany)
TC 23/SC 15
Tractors and machinery for agriculture and forestry/Machinery for forestry
January 2012
11-12
Paris (France) TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions
Charlotte (USA)
**
TC 213 Dimensional and geometrical product specifications and verification
January-February 2012
30-4 Paris (France) **
TC 236 Project Committee: Project Management
30-4 Paris (France) * TC 258 Project, programme and portfolio management
February 2012
13-14
Orlando (USA) * TC 184/SC 2
Automation systems and integration/Robots and robotic devices
20-24
Guangzhou (China)
* JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems
20-24
Kyoto (Japan) * JTC 1/SC 35 Information technology/User interfaces
20-24
Paris (France) **
TC 23/SC 2 Tractors and machinery for agriculture and forestry/Common tests
22-23
Geneva (Switzerland)
* TMB Technical Management Board
Florida (USA) **
TC 115 Pumps
February-March 2012
25-5 Toulouse (France)
**
TC 34/SC 12
Food products/Sensory analysis
28-2 Berlin (Germany)
**
TC 107 Metallic and other inorganic coatings
March 2012
12-16
Milan (Italy) * TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
29 Frankfurt (Germany)
* TC 23/SC 19
Tractors and machinery for agriculture and forestry/Agricultural electronics
(Australia) **
JTC 1/SC 36 Information technology/Information technology for learning, education and training
April 2012
15-20
(USA) **
TC 110 Industrial trucks
15-20
(USA) **
TC 110/SC 1
Industrial trucks/General terminology
15-20
(USA) **
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
16 Berlin (Germany)
**
TC 161 Control and protective devices for gas and/or oil burners and appliances
16-20
Durban (South Africa)
**
TC 135 Non-destructive testing
16-20
La Plaine St-Denis (France)
* TC 198 Sterilization of health care products
16-20
Melbourne (Australia)
**
TC 204 Intelligent transport systems
17 Senlis (France) **
TC 117 Fans
23-27
Nairobi (Kenya)
**
TC 34 Food products
25-26
Moscow (Russian Federation)
**
TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
Bern (Switzerland)
**
TC 113 Hydrometry
Durban (South Africa)
**
TC 135/SC 3
Non-destructive testing/Ultrasonic testing
Durban (South Africa)
**
TC 135/SC 5
Non-destructive testing/Radiation methods
May 2012
7-11 Berlin (Germany)
**
TC 46 Information and documentation
7-11 Berlin (Germany)
**
TC 46/SC 4 Information and documentation/Technical interoperability
7-11 Berlin (Germany)
* TC 46/SC 11
Information and documentation/Archives/records management
8 Chicago (USA) * TC 68/SC 7 Financial services/Core banking
*
8-10 Sydney (Australia)
* TC 145/SC 1
Graphical symbols/Public information symbols
10 Chicago (USA) * TC 68 Financial services
10-11
Tel Aviv (Israel)
**
TC 184/SC 5
Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications
14-15
Rio de Janeiro (Brazil)
**
TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
15-17
Buenos Aires (Argentina)
* TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
20-25
Jeju (Korea, Republic of)
* JTC 1/SC 7 Information technology/Software and systems engineering
20-25
Seoul (Korea, Republic of)
**
TC 228 Tourism and related services
21-25
Berlin (Germany)
**
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
22 Delft (Netherlands)
**
TC 195 Building construction machinery and equipment
22 Delft (Netherlands)
* TC 195/SC 1
Building construction machinery and equipment/Machinery and equipment for concrete work
(Unknown) **
TC 126 Tobacco and tobacco products
(Australia) **
TC 145 Graphical symbols
June 2012
4-8 Paris (France) **
TC 85 Nuclear energy, nuclear technologies, and radiological protection
6-7 Geneva (Switzerland)
**
COPOLCO Committee on consumer policy
11-12
Paris (France) * TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
11-15
Buffalo (USA) **
TC 108/SC 3
Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments
11-15
Kyoto (Japan) * TC 121 Anaesthetic and respiratory equipment
11-15
Kyoto (Japan) **
TC 121/SC 1
Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines
11-16
La Plaine St-Denis (France)
* TC 147 Water quality
13-14
Geneva (Switzerland)
* TMB Technical Management Board
19-22
Vienna (Austria)
* REMCO Committee on reference materials
20-21
Milan (Italy) **
TC 29/SC 10
Small tools/Assembly tools for screws and nuts, pliers and nippers
24-29
Madrid (Spain) * TC 37 Terminology and other language and content resources
Orlando (USA) * TC 10 Technical product documentation
*
Brussels (Belgium)
**
TC 34/SC 9 Food products/Microbiology
Calgary (Canada)
**
TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
Brugge (Belgium)
**
TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
2nd Quarter 2012
(China) **
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
(Greece) **
TC 92/SC 3 Fire safety/Fire threat to people and environment
(France) **
TC 211 Geographic information/Geomatics
August 2012
27-31
Montreal (Canada)
**
JTC 1/SC 35 Information technology/User interfaces
September 2012
3-8 Zurich (Switzerland)
**
TC 142 Cleaning equipment for air and other gases
19-21
San Diego (USA)
**
GA General Assembly
22 San Diego (USA)
**
COUNCIL Council
23-28
Rio de Janeiro (Brazil)
**
TC 164 Mechanical testing of metals
23-28
Rio de Janeiro (Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
23-28
Rio de Janeiro (Brazil)
**
TC 164/SC 3
Mechanical testing of metals/Hardness testing
23-28
Rio de Janeiro (Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-26
Sydney (Australia)
* TC 54 Essential oils
24-28
Stockholm (Sweden)
**
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
Zibo city (China)
**
TC 206 Fine ceramics
Cadiz (Spain) **
TC 213 Dimensional and geometrical product specifications and verification
October 2012
1-2 Ottawa (Canada)
* TC 34/SC 11
Food products/Animal and vegetable fats and oils
8-12 (Unknown) **
TC 92 Fire safety
10-11
Berlin (Germany)
* TC 167 Steel and aluminium structures
10-17
(China) **
TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection
14-19
Tokyo (Japan) * TC 59/SC 14
Buildings and civil engineering works/Design life
15-19
Amsterdam (Netherlands)
* TC 146 Air quality
24 Sydney (Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
(Unknown) **
TC 92/SC 2 Fire safety/Fire containment
(Brazil) **
TC 127 Earth-moving machinery
November 2012
Tokyo (Japan) **
TC 17/SC 1 Steel/Methods of determination of chemical composition
(Korea, Republic of)
**
TC 23/SC 7 Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
(USA) **
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems
4th Quarter 2012
(Saudi Arabia) **
TC 211 Geographic information/Geomatics
Month unknown 2012
(Europe) **
JTC 1/SC 24 Information technology/Computer graphics, image processing and environmental data representation
(Korea, Republic of)
**
TC 28 Petroleum products and lubricants
Chicago (USA) **
TC 68/SC 4 Financial services/Securities and related financial instruments
Tokyo (Japan) **
TC 69 Applications of statistical methods
(South Africa) **
TC 102 Iron ore and direct reduced iron
Sydney (Australia)
**
TC 138 Plastics pipes, fittings and valves for the transport of fluids
Sydney (Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
September 2012
23-28
Rio de Janeiro (Brazil)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
Month unknown 2012
(Finland) **
TC 190 Soil quality
(China) **
TC 202 Microbeam analysis
(France) **
TC 205 Building environment design
(Thailand) **
TC 207 Environmental management
February-March 2013
25-1 (South America)
**
JTC 1/SC 35 Information technology/User interfaces
March 2013
(Kenya) **
JTC 1/SC 36 Information technology/Information technology for learning, education and training
April 2013
10-11
Helsinki (Finland)
**
TC 117 Fans
Paris (France) **
TC 29/SC 5 Small tools/Grinding wheels and abrasives
May 2013
13-16
Chicago (USA) **
TC 195 Building construction machinery and equipment
13-17
(Italy) **
TC 29 Small tools
13-17
Guangzhou (China)
* TC 68 Financial services
27-31
Shanghai (China)
**
TC 4 Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
(China) **
TC 10 Technical product documentation
Paris (France) **
TC 46/SC 11
Information and documentation/Archives/records management
August 2013
26-30
(South America)
**
JTC 1/SC 35 Information technology/User interfaces
September 2013
(Korea, Republic of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions
(Korea, Republic of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan) **
TC 142 Cleaning equipment for air and other gases
October 2013
Mexico (Mexico)
**
TC 113 Hydrometry
Month unknown 2013
(Australia) **
REMCO Committee on reference materials
(South Africa) **
TC 37 Terminology and other language and content resources
(Unknown) **
TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
(USA) **
TC 69 Applications of statistical methods
(Korea, Republic of)
**
TC 107 Metallic and other inorganic coatings
Porto de Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway) **
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
Amsterdam (Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Portugal) **
TC 228 Tourism and related services
May 2014
Washington, D.C (USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
Month unknown 2014
(USA) **
REMCO Committee on reference materials
(Brazil) **
TC 28 Petroleum products and lubricants
(Germany) **
TC 37 Terminology and other language and content resources
(USA) **
TC 142 Cleaning equipment for air and other gases
Month unknown 2015
(South Africa) **
REMCO Committee on reference materials
London (United Kingdom)
**
TC 142 Cleaning equipment for air and other gases
Top Related