Lync Topology Setup
PSTN Gateway Setup
Mediation Pool Setup
Mediation Server
Netstat
From here you can see that the mediation server is connected to the Digium gateway via port 5060
The Mediation server has 2x NIC
Internal IP: 10.1.60.131
External IP: 10.1.105.48
The External Interface has a gateway of 10.1.105.1 and as standard the internal interface has no gateway, so we had to setup a route for this:
route add 10.1.60.0 mask 255.255.255.0 10.1.60.1 metric 15
Digium Gateway Setup
General Networking Setup
Digium SIP Endpoints
Endpoint Setup to Enta Asterisk
Endpoint Setup to Entanet Asterisk
Endpoint Setup to Lync
Endpoint Setup to Lync – Advanced Setup
Endpoint Setup from Lync
Endpoint Setup from Lync – Advanced Setup
Call Routing Rules
Call Routing Rules from Lync > Asterisk
Call Routing Rules from Enta Asterisk > Lync
Call Routing Rules from Entanet Asterisk > Lync
Lync Voice Routing
Dial Plan Information
Voice Policy Information
Route Information
PSTN Usage Information
Trunk Configuration Information
Making Calls
Internal Calls
This is achieved by calling the users extention number as it is located in the users details under line URI: “tel:569”
External Calls
Enta Technologies: www.entatech.com / www.entaonline.com
Lync Engineer: Scott Eastman
Entanet: www.enta.net
Asterisk Engineer: Jon Farmer
Top Related