B-22, Aspen Block, Citilights Meadows,No, 82, Andal Ammal Street, Nolambur,Chennai – 600 095, India
Ph: +91-44-26530177, +91-9677244170, E-Mail: [email protected]
2014
Vibration Training Program
Introduction To Machinery Vibrations (IMV)
Basic Machinery Vibrations (BMV)
Machinery Vibration Analysis (MVA)
ISO Vibration Analyst Certification - I, II & III
E VIBRATION CONSULTANCY SERVICES
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
INTRODUCTION TO MACHINERY VIBRATIONS (IMV) – 04 DAYS COURSE
COURSE OVERVIEW
This course is designed for any engineers prefer to become machinery vibration
diagnosticians and to develop career in machinery analysis. This course will help fresh
vibration analysts to understand basic vibration, how to perform vibration analysis on
machineries and prepare for the Vibration Institute certification examination category - I.
COURSE DATE & LOCATION
Course shall be organized based on request from customers.
COURSE FEE
IMV Course Fee : US $ 675/- plus 12.36% service tax
The fee is inclusive of course materials, stationeries, snacks and lunch
COURSE MATERIALS
Each participant will receive
� IMV course notes, workshop book, student PPT and exam study topics
� Scientific calculator, ruler and stationeries
� Course completion certificate
COURSE INSTRUCTOR
The course instructor is Mr. Dakshina M. Ramsekar, specialist in turbo-machinery
diagnostics and certified Vibration Analyst Category – IV from Vibration Institute – USA. He
has about 20 years’ work experience in India and abroad in rotating machinery vibration
diagnostic studies, trouble shooting, reliability improvement, failure & root cause analysis,
inspection, overhaul and maintenance.
WHO SHOULD ATTEND?
Mangers, Superintendents, Chief Engineers, Vibration Analyst, Engineers, Supervisors,
Technicians, other technical staffs and fresh engineers/technicians who want to develop
career in rotating machinery vibrations.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
COURSE OUTCOMES
Understand vibration concept and measurements
Data collection from vibration analyzer
Perform simple testing and vibration fault analysis
COURSE PROGRAM
DAY ONE
� Machinery Vibration Introductions – Background, definitions, sources, effects,
predictive maintenance, measurement concepts, equipment, physics, units, properties,
measurement, conversions, time, frequencies, orbit domains, analysis, excitation,
natural frequencies, resonance and critical speeds.
� Workshop
DAY TWO
� Data Collection – Physical observations, transducers, frequency spans, measures,
triggering, transducers mounting, transducer locations and instruments.
� Workshop
DAY THREE
� Machine Knowledge and Testing – Fault Sources, design and function of machines,
periodic and permanent monitoring, acceptance testing.
� Frequency Spectrum – Introduction, identification and matching.
� Workshop
DAY FOUR
� Machine Faults and Analysis – Mass unbalance, misalignment, looseness, bearing
defects and electrical defects.
� Vibration Severity – Criteria, procedures and vibration charts
� Workshop
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
BASIC MACHINERY VIBRATIONS (BMV) – 04 DAYS COURSE
COURSE OVERVIEW
This course is designed for individuals who have two plus years’ experience in industries and
vibration analysis. This course will help professionals to understand vibration principles,
how to perform vibration analysis on machineries, setup plant vibration data collection,
basic balancing and partial preparation for the Vibration Institute certification examination
category II.
COURSE LOCATION & DATE
LOCATION COURSE DATE REGISTRATION ENDS
Chennai 21-24 Apr 2014 21 Mar 2014
Mumbai 14-17 July 2014 14 Jun 2014
Chennai 08-11 Dec 2014 08 Oct 2014
COURSE FEE
BMV Course Fee : US $ 775/- plus 12.36% service tax
The fee is inclusive of course materials, stationeries, snacks and lunch
COURSE MATERIALS
Each participant will receive
� BMV course notes, workshop book, student PPT and exam study topics
� Scientific calculator, ruler and stationeries
� Course completion certificate
COURSE INSTRUCTOR
The course instructor is Mr. Dakshina M. Ramsekar, specialist in turbo-machinery
diagnostics and certified Vibration Analyst Category – IV from Vibration Institute – USA. He
has about 20 years’ work experience in India and abroad in rotating machinery vibration
diagnostic studies, trouble shooting, reliability improvement, failure & root cause analysis,
inspection, overhaul and maintenance.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph: +91-44-26530177, +91-9677244170
E-Mail: [email protected]
WHO SHOULD ATTEND?
Mangers, Superintendents, Chief Engineers, Vibration Analyst, Engineers, Supervisors,
Technicians and other technical staffs who want to enhance vibration knowledge and to
implement vibration monitoring in the plant.
COURSE OUTCOMES
Understanding of vibration principles and techniques
Setup vibration monitoring program and perform better analysis
Perform basic resonance testing, basic balancing of the rotating equipment
Fault analysis and report writing
COURSE PROGRAM
DAY ONE
� Machinery Vibrations – Physical nature of vibrations, period, frequency, amplitude,
phase, measures, conversions, analysis, units, natural frequencies, forcing
frequencies, resonance, critical speeds, and damping.
� Workshop
DAY TWO
� Data Acquisition – Selection of measures, transducers, triggering devices, transducer
locations/mountings, frequency span and data display.
� Data Processing – Oscilloscopes, FFT Analyzers. Data Sampling, Aliasing, Windowing,
Dynamic Range, FFT Analyzer/Data Collector Setup.
� Workshop
DAY THREE
� Fault Diagnostics – Operating speed, rolling element bearings, gearboxes, electric
Motors, pumps, fans and compressors.
� Machine Condition Evaluation – Shaft vibration, bearing and casing Vibration.
� Workshop
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph: +91-44-26530177, +91-9677244170
E-Mail: [email protected]
DAY FOUR
� Machine Testing – Test plans, testing equipment, site inspection, baseline test,
resonance and critical speed testing, specifications, data representation and reports.
� Periodic Monitoring - Machinery categorization, measures and selection, frequency
of data collection, trending, alarms and reporting.
� Basic Balancing – Mass unbalance and causes, types of unbalance, unbalance force,
balancing equipment, pre-balancing checks, measurement, balancing pitfalls, trial
weight selections, vectors and balance weights, mass splitting and consolidations
� Workshop
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph: +91-44-26530177, +91-9677244170
E-Mail: [email protected]
MACHINERY VIBRATIONS ANALYSIS (MVA) - 04 DAYS COURSE
COURSE OVERVIEW
This course is designed for individuals who have three plus years’ experience in industries
and vibration analysis. This course will provide advanced skill and necessary knowledge to
set up condition programs, fault diagnostics, trouble shooting, in-situ singe plane balancing
and partial preparation for the Vibration Institute certification examination category III.
COURSE DATE
LOCATION COURSE DATE REGISTRATION END
Chennai 21-24 July 2014 21 Jun 2014
Mumbai 15-18 Dec 2014 15 Nov 2014
COURSE FEE
MVA Course Fee : US $ 875/- plus 12.36% service tax
The fee is inclusive of course materials, stationeries, snacks and lunch
COURSE MATERIALS
Each participant will receive
� MVA course notes, workshop book, student PPT and exam study topics
� Scientific calculator, ruler and stationeries
� Course completion certificate
COURSE INSTRUCTOR
The course instructor is Mr. Dakshina M. Ramsekar, specialist in turbo-machinery
diagnostics and certified Vibration Analyst Category – IV from Vibration Institute – USA. He
has about 20 years’ work experience in India and abroad in rotating machinery vibration
diagnostic studies, trouble shooting, reliability improvement, failure & root cause analysis,
inspection, overhaul and maintenance.
WHO SHOULD ATTEND?
Mangers, Superintendents, Chief Engineers, Vibration Analyst, Engineers, Supervisors,
Technicians and other technical staffs who want to enhance vibration knowledge, implement
and supervise vibration monitoring in the plant.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
COURSE OUTCOMES
Better understand vibration principles and techniques
Understand signal processing and data acquisition
Enhanced skill on fault diagnostics and analysis
Setup and manage vibration monitoring programs
Acceptance testing, resonance and critical speed identification
Perform in-site single plane balancing and basic vibration control
COURSE PROGRAM
DAY ONE
� Theory of Machinery Vibrations – Physical nature of vibrations, vibratory motions,
angular rate and phase, acceleration, velocity and displacement relationship,
conversions, machinery vibration response and machine whirling and instabilities.
� Data Acquisition and Data Processing – Vibration transducers and frequency
response, measurement selections, transducer selections, mounting, locations and
scaling.
� Vibration Instruments Uses and Limitations – Vibration analyzer and data collectors,
oscilloscope, tracking filter, digital signal processing, aliasing, windows, dynamic
range, averaging, overall amplitude and waterfall.
� Workshop
DAY TWO
� Time and Frequency Analysis – Times domain and waveform shape analysis,
spectrum analysis, synchronous and non-synchronous, amplitude and frequency
modulation, harmonics and orders, beats, sum and difference frequency and
demodulation techniques.
� Orbit and Phase Analysis – Orbit display and constructions, orbit whirl and analysis
rule, phase analysis, measurement and angular rate.
� Resonance and Critical Speed Analysis – Basic concepts, natural frequency, mode
shape, operational deflection shape, resonance testing and procedures,
campbell/interference diagram, bode and polar plots.
� Workshop
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
DAY THREE
� Condition Evaluation and Condition Monitoring – Casing and shaft vibration evaluation,
ISO standards, vibration guidelines for condition evaluation and band evaluation.
� Fault Analysis – Rolling element and fluid film bearing analysis, pumps, fans, blower,
compressors, gearbox, motor & generators analysis.
� Workshop
DAY FOUR
� Vibration Control – Force and vibration relationship, corrections techniques – force
reduction, mass addition and tuning, vibration absorbers, isolation and damping.
� Balancing – Causes of unbalance, types of unbalance, balancing equipment, pre-
balancing check, balancing phase measurement, high spot and heavy spot relationship,
trial weight selections, trial weight effects, balancing pitfalls, single plane balancing -
vector method – weight addition and removal, three point method, balance sensitivity
and phase lag, weight splitting and consolidation, residual unbalance and acceptable
vibrations, basic two-plane balancing.
� Workshop
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
CERTIFICATION EXAMINATION
VIBRTAION ANALYST CATEGORY - I
Those who have minimum of six months experience and attended IMV course or equivalent
ISO 18436-3 complaint courses shall appear Category - I examination. The course is not
mandatory to appear examination, however it is recommended to take equivalent ISO
18436-3 complaint courses to successful in the examination. The Category - I certification
examination is 60 multiple choice questions and candidates are given two hours to complete
the examination. The successful candidate in examination will receive ISO – 18436-2 and
American National Standards Institute (ANSI) accredited certificate from Vibration Institute,
USA. The Vibration Analysts Category - I qualified to perform basic vibration analysis and
data collection.
EXAM PROGRAM
Morning Session : Exam Topics Review and Proficiency Test
Afternoon Session : Vibration Analyst Category - I Exam
EXAM FEE
Category - I Examination Fee : US$ 490/- plus 12.36% service tax
MEMBERSHIP FEE (Any one membership to be opted - for more details visit VI website)
Proactive Surveillance Fee : US$ 70/-
Annual Membership Fee : US$ 120/-
Note - The participant shall pay the membership fee directly to Vibration Institute - USA after pass the exam.
LOCATION AND EXAMINATION DATE
LOCATION EXAM DATE REGISTRATION END
Chennai 25 Apr 2014 25 Mar 2014
Mumbai 18 July 2014 18 Jun 2014
Chennai 25 July 2014 25 June 2014
Chennai 12 Dec 2014 12 Oct 2014
Mumbai 19 Dec 2014 19 Nov 2014
Interested candidates download the registration form from our website, fill and mail us to
[email protected] or fill online registration form and submit
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
CERTIFICATION EXAMINATION
VIBRTAION ANALYST CATEGORY - II
Those who have minimum of eighteen months experience and attended BMV training
course or equivalent ISO 18436-3 complaint courses shall appear Category - II examination.
The course is not mandatory to appear examination, however it is recommended to take
equivalent ISO 18436-3 complaint courses to successful in the examination. The Category - II
certification examination is 100 multiple choice questions and candidates are given three
hours to complete the examination. The successful candidate in examination will receive ISO
– 18436-2 and American National Standards Institute (ANSI) accredited certificate from
Vibration Institute, USA. The Vibration Analysts Category II qualified to perform basic
vibration analysis, set-up instruments, route data collection and maintain database.
EXAM PROGRAM
Morning Session : Exam Topics Review and Proficiency Test
Afternoon Session : Vibration Analyst Category - II Exam
EXAM FEE
Category - II Examination Fee : US$ 515/- plus 12.36% service
MEMBERSHIP FEE – Any one membership to be opted (for more details visit VI website)
Proactive Surveillance Fee : US$ 70/-
Annual Membership Fee : US$ 120/-
Note - The participant shall pay the membership fee directly to Vibration Institute - USA after pass the exam.
LOCATION AND EXAMINATION DATE
LOCATION EXAM DATE REGISTRATION END
Chennai 25 Apr 2014 25 Mar 2014
Mumbai 18 July 2014 18 Jun 2014
Chennai 25 July 2014 25 June 2014
Chennai 12 Dec 2014 12 Oct 2014
Mumbai 19 Dec 2014 19 Nov 2014
Interested candidates download the registration form from our website, fill and mail us to
[email protected] or fill online registration form and submit.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
CERTIFICATION EXAMINATION
VIBRTAION ANALYST CATEGORY - III
Those who have minimum of three experience and attended MVA course or equivalent ISO
18436-3 complaint courses shall appear Category – III examination. The course is not
mandatory to appear examination, however it is recommended to take equivalent ISO
18436-3 complaint courses to successful in the examination. The Category III certification
examination is 100 multiple choice questions and candidates are given four hours to
complete the examination. The successful candidate in examination will receive ISO –
18436-2 and American National Standards Institute (ANSI) accredited certificate from
Vibration Institute, USA. The Vibration Analyst Category-III qualified to perform supervise
condition monitoring programs, diagnostics of machines including spectral, waveform, phase
& orbit analysis, minor corrective actions and single-plane balancing and diagnostic testing.
EXAM PROGRAM
Morning Session : Exam Topics Review and Proficiency Test
Afternoon Session : Vibration Analyst Category - II Exam
EXAM FEE
Category - III Examination Fee : US$ 565/- plus 12.36% service tax
MEMBERSHIP FEE – Any one membership to be opted (for more details visit VI website)
Surveillance Fee : US$ 70/-
Annual Membership Fee : US$ 120/-
Note: To appear Vibration Analyst Category – III exam, the candidate must hold valid Vibration Analyst CAT-II
certification and atleast surveillance member of Vibration Institute, USA.
LOCATION AND EXAMINATION DATE
LOCATION EXAM DATE REGISTRATION END
Chennai 25 Apr 2014 25 Mar 2014
Mumbai 18 July 2014 18 Jun 2014
Chennai 25 July 2014 25 June 2014
Chennai 12 Dec 2014 12 Oct 2014
Mumbai 19 Dec 2014 19 Nov 2014
Interested candidates download the registration form from our website, fill and mail us to
[email protected] or fill online registration form and submit.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
TERMS OF SERVICES
• Fee shall be accepted either wire or online transfer or direct deposit to account only.
For bank account details please send an email to [email protected].
• We shall accept currency either Indian Rupees or US Dollar. Receipt will be send to the
candidate once the payment is confirmed.
• After registration, due to circumstances participant is decides cancellation should intimate via
email. The fee shall be refunded with the following terms
� For cancellation 30 days prior to the course or examination starts date, 15% of the fee will
be imposed
� For cancellation 15 days prior to the course or examination start date, 25% of the fee will
be imposed
� For cancellation 7 days prior to the course or examination start date, 50% of the fee will be
imposed � For those who not attending the course or examination, 100% of the fee will be imposed
• Course and exam shall be cancelled or subject to change date, location and venue, if
unavailability of venue or course instructor or no minimum required candidates (10 Nos)
for the training course and examination. In such situation course or examination full fee
will be returned if the candidate decides not to take part in the re-scheduled training
course or examination.
• The course instructor and examination proctor will be Vibration Institute certified
Vibration Analyst Category – III or IV.
• The regular training course fee is inclusive of course instructor fee, travel fare, stay,
venue, course materials and shipping charges.
• The examination fee is inclusive of Vibration Institute examination fee, proctor fee,
proctor boarding & travel fare, venue, examination materials and certificate shipping
charges.
• The service tax of 12.36% shall be charged additional to course and exam fee as per
Indian taxation law.
• The Category I certification examinations are 60 multiple choice questions and
candidates are given two hours to complete the examination.
E VIBRATION CONSULTANCY SERVICES
B-22, Aspen Block, Citilights Meadows
No, 82, Andal Ammal Street, Nolambur
Chennai – 600 095, India
Ph:+91-44-26530177, +91-9677244170
E-Mail: [email protected]
• The Category II certification examinations are 100 multiple choice questions and
candidates are given three hours to complete the examination.
• The Category III certification examinations are 100 multiple choice questions and
candidates are given four hours to complete the examination.
• The Category IV certification examinations are 60 multiple choice questions and
candidates are given five hours to complete the examination.
• Each question in the exam paper will carry equal marks and 75 % is the pass grade. The
marks will not be disclosed by Vibration Institute as per policy however pass or fail only
informed to the candidate.
• The training course and examination will be conducted in reputed star hotel. The
candidate should arrange their own stay and it is not included in the fee.
• The candidate shall be informed about the exam results successful or unsuccessful in
three to four weeks from the date of examination once results received from Vibration
Institute.
• For the successful candidate ISO-18436-2 & ANSI accredited certificate will be awarded
from Vibration Institute, USA. The unsuccessful candidate can appear re-test during
next schedule examination with nominal re-test fee plus administrative charges.
• The certification is valid for five years from the date of exam subject to renewal of
Vibration Institute membership annually.
• For more details about training courses and certification examination please visit
Vibration Institute website www.vi-institute.org and our website
www.evibrationconsultancy.com.
Top Related