Veritas NetBackup KM for PATROL
STORAGE MONITORING
USER DOCUMENTATION
Version 3.1.00
August 2016
Contacting BMC Software
You can access the BMC Software Web site at http://www.bmc.com. From this Web site, you canobtain information about the company, its products, corporate offices, special events, and careeropportunities.
United States and Canada
Address BMC Software, Inc.2101 CityWest Blvd. Houston TX77042-2827
Telephone 1 (713) 918 8800 or 1 (800) 841 2031 (Toll Free)
Copyright 2015 BMC Software, Inc. or licensors, as an unpublished work. All rights reserved.
BMC Software, the BMC Software logos, and all other BMC Software product or service names areregistered trademarks or trademarks of BMC Software, Inc.
All other trademarks belong to their respective companies.
BMC Software considers information included in this documentation to be proprietary andconfidential. Your use of this information is subject to the terms and conditions of the applicableEnd User License Agreement for the product and the proprietary and restricted rights noticesincluded in this documentation.
Restricted Rights Legend
U.S. Government Restricted Rights to Computer Software. UNPUBLISHED -- RIGHTS RESERVEDUNDER THE COPYRIGHT LAWS OF THE UNITED STATES. Use, duplication, or disclosure of any dataand computer software by the U.S. Government is subject to restrictions, as applicable, set forthin FAR Section 52.227-14, DFARS 252.227-7013, DFARS 252.227-7014, DFARS 252.227-7015, andDFARS 252.227-7025, as amended from time to time. Contractor/Manufacturer is BMC Software,Inc., 2101 CityWest Blvd., Houston, TX 77042-2827, USA. Any contract notices should be sent to thisaddress.
2
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Customer Support
You can obtain technical support by using the Support page on the BMC Software Web site or bycontacting Customer Support by telephone or e-mail.
Support Web Site
You can obtain technical support from BMC Software 24 hours a day, 7 days a week at http://www.bmc.com/support_home. From this Web site, you can:
Read overviews about support services and programs that BMC Software offers
Find the most current information about BMC Software products
Search a database for problems similar to yours and possible solutions
Order or download product documentation
Report a problem or ask a question
Subscribe to receive e-mail notices when new product versions are released
Find worldwide BMC Software support center locations and contact information, including e-mail addresses, fax numbers, and telephone numbers
You can also access product documents and search the Knowledge Base for help with an issue at http://www.sentrysoftware.com
Support by Telephone or E-mail
In the United States and Canada, if you need technical support and do not have access to the Web,call 800 537 1813. Outside the United States and Canada, please contact your local support centerfor assistance. To find telephone and email contact information for the BMC Software supportcenter that services your location, refer to the Contact Customer Support section of the Supportpage on the BMC Software Web site at http://www.bmc.com/support_home.
3
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
4
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Table of Contents.....................................................................................................................................................................................13Requirements
.......................................................................................................................................................................................13System Requirements
.......................................................................................................................................................................................14Software Requirements
.......................................................................................................................................................................................17Security Requirements
.......................................................................................................................................................................................23Disk Space Requirements
.......................................................................................................................................................................................24Remote Monitoring Requirements
.....................................................................................................................................................................................26Getting the BMC Software Installation Utility
.....................................................................................................................................................................................27Packages
.....................................................................................................................................................................................27Extracting the Setup Files
.....................................................................................................................................................................................30Installing Veritas NetBackup KM for PATROL
.....................................................................................................................................................................................43Uninstalling Veritas NetBackup KM for PATROL
.....................................................................................................................................................................................49Loading/Unloading the KM
.......................................................................................................................................................................................49Loading the KM
......................................................................................................................................................................49Loading the KM on PATROL Console
......................................................................................................................................................................50Loading the KM on PATROL Central
......................................................................................................................................................................50Configuring the PATROL Agent to Preload the KM
.......................................................................................................................................................................................51Unloading the KM
......................................................................................................................................................................51Unloading the KM from the PATROL Agent
......................................................................................................................................................................52Unloading the KM from the PATROL Console
......................................................................................................................................................................52Unloading the KM from the PATROL Central Console
.....................................................................................................................................................................................53Performing Post-Installation Operations
.......................................................................................................................................................................................54Configuring NetBackup Nodes Monitoring
.......................................................................................................................................................................................55Configuring the KM User Account
.......................................................................................................................................................................................58Verifying Application Discovery
.......................................................................................................................................................................................58Verifying the Instance Limits
.......................................................................................................................................................................................60Verifying the Initial Setup
.......................................................................................................................................................................................60Restarting PATROL Agent and PATROL Console
.....................................................................................................................................................................................62Integrating with BMC Portal
.....................................................................................................................................................................................62Integrating with BMC TrueSight OM
.....................................................................................................................................................................................64Administering Veritas NetBackup
.......................................................................................................................................................................................64Starting Master/Media Server
.......................................................................................................................................................................................65Stopping Master/Media Server
5
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
.......................................................................................................................................................................................65Assigning, Denying, or Resubmitting Mount Requests
.......................................................................................................................................................................................66Bringing Standalone Drives Online or Offline
.......................................................................................................................................................................................66Bringing Robotic Drives Online or Offline
.....................................................................................................................................................................................67Configuring the KM
.......................................................................................................................................................................................67Configuring Paths
.......................................................................................................................................................................................68Specifying the Node Type
.......................................................................................................................................................................................68Configuring the Multi-Node Monitoring Mode
.......................................................................................................................................................................................70Filtering Elements to Monitor
.......................................................................................................................................................................................73Blocking the Remote Monitoring
.......................................................................................................................................................................................73Configuring Monitoring Periods
.......................................................................................................................................................................................76Configuring the Elements Status
.......................................................................................................................................................................................78Configuring the Node Status
.......................................................................................................................................................................................80Configuring Mount Requests Date/Time Format
.......................................................................................................................................................................................82Configuring the Log Filter
.......................................................................................................................................................................................84Configuring the Log Scan Limit
.......................................................................................................................................................................................85Configuring Jobs Erroneous Exit Status Filter
.......................................................................................................................................................................................87Configuring Policy Backup Restriction
.......................................................................................................................................................................................88Configuring Alert Acknowledgement
.......................................................................................................................................................................................90Forcing the Classic Mode
.......................................................................................................................................................................................91Refreshing Parameters
.......................................................................................................................................................................................92Reloading Commands
.......................................................................................................................................................................................93Enabling the Debug Mode
.....................................................................................................................................................................................96Acknowledging Alerts
.....................................................................................................................................................................................97Generating Reports
.....................................................................................................................................................................................100NBU_CLIENT_CONTAINER
.....................................................................................................................................................................................102NBU_CLIENT
.....................................................................................................................................................................................104NBU_DAEMON_CONTAINER
.....................................................................................................................................................................................106NBU_DAEMON
.....................................................................................................................................................................................109NBU_DATABASE_CONTAINER
.....................................................................................................................................................................................112NBU_DATABASE
.....................................................................................................................................................................................114NBU_DEVICE_CONTAINER
.....................................................................................................................................................................................116NBU_DEVICE
.....................................................................................................................................................................................119NBU_DPOOL
.....................................................................................................................................................................................122NBU_DVOLUME
.....................................................................................................................................................................................125NBU_JOB_CONTAINER
.....................................................................................................................................................................................128NBU_JOB
6
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
.....................................................................................................................................................................................131NBU_LDEVICE
.....................................................................................................................................................................................134NBU_LIBRARY_CONTAINER
.....................................................................................................................................................................................136NBU_LIBRARY
.....................................................................................................................................................................................140NBU_LOG_CONTAINER
.....................................................................................................................................................................................142NBU_LOG
.....................................................................................................................................................................................146NBU_MAIN
.....................................................................................................................................................................................147NBU_MEDIASERVER_CONTAINER
.....................................................................................................................................................................................149NBU_MEDIASERVER
.....................................................................................................................................................................................151NBU_MOUNT_CONTAINER
.....................................................................................................................................................................................153NBU_MOUNT
.....................................................................................................................................................................................155NBU_PCLIENT
.....................................................................................................................................................................................158NBU_POLICY_CONTAINER
.....................................................................................................................................................................................160NBU_POLICY
.....................................................................................................................................................................................165NBU_POOL_CONTAINER
.....................................................................................................................................................................................167NBU_POOL
.....................................................................................................................................................................................171NBU_SERVER
.....................................................................................................................................................................................178NBU_STORAGE_CONTAINER
.....................................................................................................................................................................................180NBU_STORAGE
.....................................................................................................................................................................................181Managing Baselines and Key Performance Indicators
.....................................................................................................................................................................................184Troubleshooting
.....................................................................................................................................................................................188Impact on Resources
8
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
What's NewNBU-961 - The status of the NetBackup media servers is now monitored from the masterserver through the NBU_MEDIASERVER_CONTAINER and NBU_MEDIASERVER applicationclasses.
Changes and ImprovementsNBU-665 - All Ksh scripts used in the KM for UNIX/Linux platforms, now support Bash as well.So if Ksh is not available on the target node, a softlink (/bin/ksh) to the Bash interpreter (/bin/bash) can be used as a workaround.
Fixed IssuesNBU-671 - To avoid false alarms, calendar-based backup policies are now excluded from thecalculation of the next scheduled backup, allowing the State parameter of the NBU_POLICYapplication class to remain in “Idle” state instead of “Not Started”. The “Not Started” state isonly set for policies that use a frequency-based backup schedule.
10
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Veritas NetBackup KM for PATROL monitors your Veritas NetBackup environment within acentralized management console to ensure it runs efficiently 24 hours a day.
The KM more especially monitors the:
Clients: state and status
Daemons: processor utilization, memory size, number of processes found, state and status
Catalog databases: space utilization, state and status
Devices: state and status, throughput of the standalone drive during the last backup activity
Disk pools: up/down state and status, number of volumes
Jobs: status, duration, data throughput and time elapsed since last backup, comparativestatistics, etc.
Log Files: size, content, growth rate, file system space utilization, etc.
Media Server availability: status of local or remote media server.
Mounts: elapsed time, state and status
Policy clients: files and file systems excluded from and included in backup, throughput, fullbackup and incremental backup information
Policies: elapsed time, throughput, full backup and incremental backup information
Robotic libraries and drives: library and drive status, throughput, loaded mediaidentification, etc.
Server availability: status, memory and CPU time consumption, etc.
Disk storage and volume pools: space utilization, status, count, etc.
All the information collected is grouped into application classes and displayed in the PATROLConsole. Alarms and warnings inform you when a suspicious behavior is detected; thus allowingyou to quickly and clearly identify peaks, troughs and trends in the performance of your backupresources.
Refer to the Reference Guide for more information about the application classes.
12
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
This chapter provides information about the tasks that must be performed before you startinstalling Veritas NetBackup KM for PATROL. Make sure to carefully read the following sectionsrequirements:
Review the System, Software, Security, Disk Space, and remote monitoring requirements
Get the BMC Software Installation Utility
Download the Installation Packages
Extract the Setup Files
13
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
RequirementsSystem RequirementsVeritas NetBackup KM for PATROL supports the following operating systems:
Operating System Version
Oracle SolarisTM 8, 9, 10, 11
HP-UX 11.00, 11.11, 11iv2, 11iv
IBM® AIXTM 5.1, 5.2, 5.3, 6.1
Red Hat® Linux® 7.2
Microsoft® Windows® 2008, 2008 R2, 2012
Since version 3.0.00 of NetBackup KM, commands reloading is not required if the operating system isupgraded (or downgraded) at a later date.
14Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Software RequirementsVeritas NetBackup KM for PATROL supports:
Software Version
Symantec NetBackup™ 5.0, 5.1, 6.0, 6.5, 7, 7.1, 7.5, 7.6
Veritas NetBackup™ 7.7
BMC Software PATROL Agent 3.9.x, 9.x
BMC Software PATROL Console 3.4.x, 3.5.x, 7.x
BMC Portal 2.3.x, 2.4.x, 2.5.x, 2.6.x, 2.7.x, 2.8.x
BMC ProactiveNet Performance Management 9.x
BMC TrueSight Operations Management 10
Since version 3.0.00 of NetBackup KM, commands reloading is not required if the operating system isupgraded (or downgraded) at a later date.
15 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
If you are running the NetBackup KM with sudo user account, or on AIX, LINUX, or MicrosoftWindows x64 managed nodes, please verify these additional software requirements:
Purpose Software Version
When running NBU KM with sudo useraccount on Solaris, HP-UX, AIX or Linuxmanaged nodes
Sudo (superuser do) 1.6.7 or later
When running NBU KM on AIX managednodes
Default ncargs value for processing bpdbjobsoutput may not be sufficient.
Check this attribute using:lsattr -EH -l sys0 | grep ncargs
If the value is below 16, increase it using:chdev -l sys0 -a ncargs=16
Any
When running NBU KM on Linux managed nodes
Korn shell binary (/bin/ksh).Alternatively a soft link from /bin/ksh to /bin/bash will be needed.
Any
When running NBU KM on MicrosoftWindows x64 managed nodes
Reg.exe patch KB948698(http://support.microsoft.com/kb/948698)
Any
The Microsoft Windows x64 Reg.exe patch, KB948698 is required to allow access to 64-bit registry keysfrom PATROL Agent. Access the above patch site from the managed node to obtain the correct patch forthat platform.
16Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Changes Required
No changes need to be done to Veritas NetBackup to use Veritas NetBackup KM for PATROL.
Some changes must however be made to BMC PATROL to improve the performance of VeritasNetBackup KM for PATROL. The PATROL Agent tuning variable “/AgentSetup/AgentTuning/pslInstructionMax” should be disabled by setting it to 0 (zero) or increased to at least 5,000,000.
This applies for all Veritas NetBackup master servers and media servers where the KM isinstalled. This adjustment will allow the data collectors to execute without incurring an internalscheduling delay.
This PATROL Agent tuning variable can be updated using wpconfig (on Microsoft Windows),xpconfig (on Unix) or PATROL Configuration Manager (PCM). Alternatively, you can use one ofthe following single line PSL command through the PATROL Console OS> prompt to update thistuning variable.
To disable the pslInstructionMax variable %PSL pconfig("REPLACE",
"/AgentSetup/AgentTuning/pslInstructionMax",0);
To set the tuning variable to at 5,000,000:%PSL v="/AgentSetup/AgentTuning/pslInstructionMax";
if(get(v)<5000000){pconfig("REPLACE",v,5000000);}
In large Veritas NetBackup systems, the value of 5,000,000 for the tuning variable “pslInstructionMax” maystill be insuf f icient. In such situations, error messages will appear on the PATROL Console System OutputWindow (SOW) reporting that some NetBackup KM data collectors are in an inf inite loop. In this case youcan set the tuning variable to zero to disable this functionality.
The KM stores all configuration information in the PATROL Agent configuration database(pconfig), under the /NBU/<node-id> and /Runtime/NBU/<node-id> paths. PATROL Agent user(default: patrol) should be able to read and write to these pconfig variables at anytime. If AccessControl List (ACL) is used to control which users are authorized to connect to a PATROL Agent,please make sure that the mode for PATROL Agent user includes “C” in the PATROL Agentvariable “/AgentSetup/accessControlList”. Please refer the PATROL Agent Ref erence Manual formore details.
To support bash shell platforms when ksh is not installed
To collect NetBackup stats when ksh was not installed on UNIX/Linux servers, you need to createa soft link for /bin/ksh to /bin/bash:
ln –s /bin/bash /bin/ksh
17 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Security RequirementsA user account with administrative privileges must be configured in BMC PATROL to read andexecute Veritas NetBackup application programs and access file systems. Depending on theoperating systems used, several options will be available.
The following user accounts can be used:
On Unix platforms:
a root user
a non-root user, such as patrol, that has sudo privileges on Veritas NetBackup to executeapplication programs and access file systems
a non-root account, such as patrol, configured in Veritas NetBackup application toadminister the Veritas NetBackup application.
On Windows platforms:
an administrator user
a non-administrator account, such as patrol, configured in Veritas NetBackup application toadminister the Veritas NetBackup application. Refer to the Veritas NetBackup SystemAdministrator’s Guide for details on how to set up this type of account.
Users added to NBU_Admin user group in VxSS. Please make sure the credentials of this userdo not expire using the utility nbac_cron.
The user login details are configured in the KM. The password is encrypted and stored in thePATROL Agent.
18Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Access Permissions
The NetBackup KM user needs “read & execute” permission to executable and library files underthe paths listed below. The Veritas NetBackup installation path INSTALL_PATH, referenced in thetables below is normally /usr/openv or /opt/VRTSnetbp (on Unix) or C:\Program Files\Veritas (onMicrosoft Windows).
Executable and Library Files accessed by the NetBackup KM User
Unix Microsoft Windows
INSTALL_PATH/netbackup INSTALL_PATH\NetBackup
INSTALL_PATH/netbackup/bin INSTALL_PATH\NetBackup\bin
INSTALL_PATH/netbackup/bin/admincmd INSTALL_PATH\NetBackup\bin\admincmd
INSTALL_PATH/netbackup/bin/goodies INSTALL_PATH\NetBackup\bin\goodies
INSTALL_PATH/volmgr/bin INSTALL_PATH\Volmgr\bin
INSTALL_PATH/volmgr/bin/goodies INSTALL_PATH\Volmgr\bin\goodies
INSTALL_PATH/lib C:\Program Files\Common Files\VERITAS Shared
/usr/openwin/lib INSTALL_PATH\NetBackup\lib
If the KM is enabled to failover in a clustered environment, the login user needs executepermissions to the following cluster commands:
/opt/VRTSvcs/bin/hagrp (in Veritas Cluster Server)
vxdctl (in Veritas Cluster File System)
/usr/cluster/bin/clrg (in Oracle Solaris Cluster)
cluster (in Microsoft Cluster)
The NetBackup KM includes some scripts which should be executable by the PATROL Agent userand the NetBackup KM user. These scripts are stored under KM_HOME path, normallyPATROL_HOME/lib/NBU.
19 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
To list all OS commands used by the NetBackup KM, execute the following PSL code from thePATROL Console, using PSL Task menu, after installing and loading the KM.
foreach var (grep("^/Runtime/NBU/.*CommandControls/",pconfig("LIST")))
{
ctl=get(var);
opt=ntharg(grep("Option",ctl),"2-"," =");
nsa=ntharg(grep("NoSudoAttempt",ctl),"2-"," =");
sua=ntharg(grep("SingleUserAttempt",ctl),"2-"," =");
typ=ntharg(grep("CommandType",ctl),"2-"," =");
cmd=nthargf(grep("CommandText",ctl),"2-","=","=");
if(osp=="") { osp=trim(nthargf(grep("OSPlatform",ctl),"2-","=","="), " "); }
fields=lines(ntharg(var,"1-","/"));
old_host=host;
host=(fields == 5)? ntharg(var,"3","/") : "localhost";
if(host!=old_host)
{
if((osp!="WINDOWS") && sudoers) { printf("\n\nCommands used with sudo:\n%s",sort(sudoers)); }
printf("\n\nOn %s:\n\n", host);
i=0; sudoers=""; osp="";
}
if((typ == "")||(typ == "OS"))
{
met="";
if(opt == "NoLogin") { met = "(run as patrol user)"; }
elsif(nsa == "YES") { met = "(run as configured user without sudo)"; }
elsif(sua == "YES") { met = "(run as supplied user - used in menu)"; }
else
{
scmd=cmd;
s=index(scmd,"%sudo");
if(s) { scmd=replace(substr(scmd,s,length(scmd)),"%sudo",""); }
sudoers=union(sudoers,ntharg(ntharg(scmd,1,">|"),"1-"," "," "));
}
printf("(%2d) %-30s %-40s: %s\n",i++,ntharg(var,fields,"/"),met,cmd);
}
}
if((osp!="WINDOWS") && sudoers) { printf("\n\nCommands used with sudo:\n%s",sort(sudoers)); }
20Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Paths and Files Accessed by PATROL Agent User
Unix Microsoft Windows
INSTALL_PATH/netbackup/db INSTALL_PATH\NetBackup\db
INSTALL_PATH/volmgr/database INSTALL_PATH\Volmgr\database
INSTALL_PATH/var INSTALL_PATH\NetBackup\var
INSTALL_PATH/netbackup/db/error/ daily_messages.log
INSTALL_PATH\NetBackup\db\error\log_date
/var/adm/messages (on Solaris)
/var/adm/syslog/syslog.log (on HP-UX)
/var/log/messages (on Linux)
On Windows platforms the Veritas NetBackup installation is identified by checking the MicrosoftWindows Registry: HKEY_LOCAL_MACHINE\SOFTWARE\Veritas\NetBackup\
The configured login user should have sufficient privileges to run regedit command on themanaged node.
21 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Sudo User for Operating System Access
If a non-root user with sudo privileges is preferred as the KM user, configure the account as asudoer through the visudo utility using code appropriate for your platform as detailed below.This user should be able to execute NetBackup commands and OS commands listed in above.
The code below also applies to all non-root users who may execute NetBackup KMadministration and report menu commands using their sudo privileges. The KM accepts any non-root user with the following sudo configuration in the sudoers file. Please replace user1, user2,user3 with appropriate KM user names. The Veritas NetBackup installation path INSTALL_PATH,referenced below is normally /usr/openv or /opt/VRTSnetbp and PATROL_HOME is the pathwhere the PATROL Agent is installed (including the target, like /opt/bmc/Patrol3/Solaris29-sun4/).
This non-root sudo user configured in the KM will be able to execute Veritas NetBackup commands. Toprevent unauthorized access, ensure this user is only used within the KM and not made public forgeneral use.
Entering the non-root sudo user with ‘Use Sudo’ option selected in to the login configuration dialog,before updating the sudoers file, will generate sudo errors. Also if the sudo user is configureddifferently, the KM may run sudo commands using incorrect sudo settings, which may expose the sudouser password.
On Solaris
User_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,!requiretty,\
env_keep+="PATH LD_LIBRARY_PATH INSTALL_PATH KM_HOME KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH andPATROL_HOME with the relevant paths. PATROL_HOME paths are only required for local monitoring.
On HP-UX
User_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,!requiretty,\
env_keep+="PATH SHLIB_PATH INSTALL_PATH KM_HOME KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
22Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH andPATROL_HOME with the relevant paths. PATROL_HOME paths are only required for local monitoring.
On AIX & Linux
User_Alias NBUKMUSERS = user1, user2, user3
Defaults:NBUKMUSERS !lecture,!authenticate,!requiretty,\
env_keep+="PATH LIBPATH INSTALL_PATH KM_HOME KM_TEMP",env_reset
NBUKMUSERS ALL=/bin/*,/sbin/*,/usr/bin/*,/usr/sbin/*,\
INSTALL_PATH/netbackup/bin/*,\
INSTALL_PATH/netbackup/bin/admincmd/*,\
INSTALL_PATH/netbackup/bin/goodies/*,\
INSTALL_PATH/volmgr/bin/*,\
INSTALL_PATH/volmgr/bin/goodies/*,\
PATROL_HOME/lib/NBU/*,PATROL_HOME/bin/*
user1, user2, user3 must be replaced with username(s) used by the KM; INSTALL_PATH andPATROL_HOME with the relevant paths. PATROL_HOME paths are only required for local monitoring.
23 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Disk Space RequirementsVeritas NetBackup KM for PATROL requires approximately:
• 2.5 MBytes of available disk space on each monitored PATROL Agent system
• 3.5 MBytes of available disk space on each PATROL Console system
• 600 KBytes of available disk space on each PATROL Central Console Server system
• 1.4 MBytes of available disk space on each PATROL Central Web Server system
It is installed under the PATROL installation path.
When monitoring a standard installation of Veritas NetBackup, the PATROL Agent will generateapproximately 500 KBytes of history data per day. An enterprise installation of Veritas NetBackupon a master server with multiple media servers, clients, robotic libraries, and standalone driveswill generate more history data (as per other KMs used by the PATROL Agent). These history datafiles are recycled by PATROL depending on the PATROL Agent history retention period.
During execution, the KM creates and maintains temporary files under KM_TEMP andKM_DEBUG paths. By default they are all under PATROL_HOME/lib/NBU, where PATROL_HOMEpath is normally /opt/bmc/Patrol3/ (on Unix) or C:\Program Files (x86)\BMC Software\Patrol3\(on Microsoft Windows). Please make sure you have sufficient space under KM_TEMP andKM_DEBUG paths.
If the location of the KM_TEMP or KM_DEBUG is not suitable, it can be changed using theConfiguration>Paths menu from the server instance. These folders should have read, write andexecute permissions for both the PATROL Agent user and the local KM login user.
24Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Remote Monitoring RequirementsRemote monitoring is required for all servers or appliances on which no PATROL Agent can beinstalled. This feature is also interesting if you lack resources or time to deploy a PATROL Agentand NetBackup KM on several servers since it allows to monitor multiple hosts from one agent.
Remote monitoring is not possible from a UNIX/Linux PATROL Agent system to a Windows-basedNetBackup server.
The requirements listed below must be met to be able to use remote monitoring.
JAVA
NetBackup KM requires Java 1.6 or higher and a Java Runtime Environment (JRE) to be installedon the same system that runs the PATROL Agent.
The KM will automatically detect the JRE path if it has been installed in the default location orunder the BMC PATROL Agent installation path. If it has been installed in a different location, youwill have to set JAVA_HOME for the Patrol Agent default account before starting the PATROLAgent.
You can download the Java Runtime Environment along with the KM on the Sentry Software Website.
25 Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NetBackup CLI User Account
A NetBackup CLI user is required to monitor NetBackup appliances. To create a NetBackup useraccount:
1. Open an SSH session on the NetBackup appliance
2. Log on as admin
3. Enter the following command: Main > Manage > NetBackupCLI > Create UserNamewhere UserName is the name to be used for the new user.
4. Enter a password for this new user account
5. A confirmation message appears stating the new user account was created successfully.
This user should have the privileges to execute NetBackup and OS commands as described in the Security Requirements section. The following sudo settings are therefore required on aNetBackup appliance:
# Added for NetBackup KM
User_Alias NBUKMUSERS = UserName
Defaults:NBUKMUSERS !lecture,!authenticate,\
env_keep+="PATH LIBPATH INSTALL_PATH KM_HOME KM_TEMP",env_reset
SSH/WMI Connection
An SSH (UNIX/Linux platforms) or a WMI (Windows platforms) connection is required to monitorremote NetBackup servers and appliances. When using an SSH connection, the SSH host keyauthentication must be disabled on the remote host.
Disabling the SSH Host Key Authentication
SSH host key authentication is enabled by default on most NetBackup servers and appliances. To
disable it:
1. Open the global SSH configuration file (ssh_config) stored in the /etc/ssh/ directory on theremote host
2. Add the line StrictHostKeyChecking no
3. Save the file.
26Requirements
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Getting the BMC Software InstallationUtilityIn order to install Veritas NetBackup KM for PATROL, you need the latest version of the BMCSoftware Installation Utility. You can download the latest Installation Utility from the BMCSoftware EPD (electronic product download) from: http://webapps.bmc.com/signon/content/logon.jsp on the BMC Software Website, or from the Veritas NetBackup KM for PATROL page onthe Sentry Software Website.
Choose the appropriate package depending on the platform you plan to install Veritas NetBackupKM for PATROL on:
For UNIX/Linux systems: ins_ALL_<version>.tar
For Windows systems: ins_WINDOWS_<version>.exe
The packages are valid for all the PATROL components: Agent, Console, Console Server, etc.
Place the Installation Utility package in the same folder as the Veritas NetBackup KM for PATROLpackages.
27 Getting the BMC Software Installation Utility
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
PackagesThe Veritas NetBackup KM for PATROL packages are available on the Sentry Software Web site.
There are two packages, each of which can be used to install the KM on every PATROL component(Agent, Console, etc.) according to the platform you are using.
Extracting the Setup FilesLike most Knowledge Modules for PATROL, you need to install Veritas NetBackup KM for PATROLon the following components of your PATROL architecture:
Every managed system with a PATROL Agent
Every PATROL Console (Classic) that will show Veritas NetBackup performance-relatedinformation and alerts
The Console Server
PATROL Central – Web Edition
For remote monitoring, there is no need to install the PATROL Agent and Knowledge Module onthe remote NetBackup server(s).
29
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Introduction
This section describes the installation procedure for Veritas NetBackup KM for PATROL on anyPATROL component (Agents, Consoles, Console Server, etc.). As the setup is based on the BMCSoftware Installation Utility, this procedure applies to all operating systems supported by VeritasNetBackup KM for PATROL.
30
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Installing Veritas NetBackup KM forPATROLInstalling Veritas NetBackup KM for PATROL is an automated process managed by a wizard. Thewizard goes through the necessary steps to install Veritas NetBackup KM for PATROL and all filesassociated with it. You are simply prompt for the product's folder location and the product/components to install.
Browse to the bmc_products folder where the files have been extracted (both Veritas NetBackupKM for PATROL and the Common Installer).
On Windows: Launch the setup.exe program
On UNIX: Launch the setup.sh script
To install Veritas NetBackup KM for PATROL1. Allow the perl.exe program to listen on this port: Click Allow access.
Installation Wizard - Step 1: Windows Security Alert
31 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. The welcome screen of the installer appears. Click Next to continue.
Installation Wizard - Step 2: Welcome
32Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
3. Read the license agreement, click the Accept option and then click Next to continue.
Installation Wizard - Step 3: Reviewing License Agreement
33 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
4. Select Install the products on this computer now and click Next to continue.
Installation Wizard - Step 4: Selecting Installation Options
34Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
5. Specify the BMC Software products folder. See the BMC Software documentation for moreinformation about the BMC Software products folder. Click Next to continue.
Installation Wizard - Step 5: Selecting the Installation Directory
35 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
6. Select one or several of the following options:
Managed System to install Veritas NetBackup KM for PATROL on a PATROL Agent.
Console Systems role to install Veritas NetBackup KM for PATROL on a PATROL ClassicConsole.
Common services to install Veritas NetBackup KM for PATROL on the Console Server or onPATROL Central – Web Edition.
Click Next to continue.
Installation Wizard - Step 6: Selecting Roles
Select as many options as required.
36Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
7. Select:
Veritas NetBackup KM for PATROL to install the KM
Java Runtime Environment program if you want to install it along with the KM (this optionis only provided when you have previously downloaded the package).
Click Next to continue.
Installation Wizard - Step 7: Selecting Products and Components
37 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
8. Provide the PATROL 3.x product directory and click Next to continue.
Installation Wizard - Step 8: Providing the PATROL 3.x Product Directory
38Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
9. Specify the Agent Port Number and select Yes to restart the PATROL Agent automatically,and click Next.
Installation Wizard - Step 9: Providing the PATROL 3.x Product Directory
39 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
10. Review the installation parameters and click Start Install to launch the installation procedure.
Installation Wizard - Step 10: Reviewing Installation Options
40Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
11. The setup program displays the actions performed and indicates the percentage ofcompletion.Once the installation complete, click Next to view the installation results.
Installation Wizard - Step 11: Installation Status
41 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
12. The wizard displays the installation results.Click View Log to display a detailed log of the installation procedure. Click Next and thenFinish to exit the setup program.
Installation Wizard - Step 12: Installation Results
42Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
13. Click the Finish button to complete and close the installation wizard.
Installation Wizard - Step 13: Completing and closing the Installation Wizard
A Help button is available at each step of the procedure. Click to display the installation online help. TheExit button allows you to stop the installation procedure.
43 Installing Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Uninstalling Veritas NetBackup KMfor PATROLUninstalling Veritas NetBackup KM for PATROL is an automated process managed by a wizard.The wizard goes through the necessary steps to remove Veritas NetBackup KM for PATROL and allfiles associated with it. You are simply prompt for the product's folder location and the product/components to uninstall.
To uninstall Veritas NetBackup KM for PATROL1. Locate the Uninstall folder under the BMC products directory (typically under C:\Program
Files\BMC Software, or /opt/bmc):
On Windows systems, launch uninstall.exe
On UNIX, launch uninstall.sh
Un-install Wizard — Welcome Step
44Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Specify the BMC Software products folder. See the BMC Software documentation for moreinformation about the BMC Software products folder.
Un-install Wizard — Specifying folder
45 Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
3. To uninstall the KM, select Veritas NetBackup KM for PATROL.
Un-install Wizard — Selecting Products and Components Directory
46Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
4. Click Start Uninstall.
Un-install Wizard — Reviewing Selected Products & components and start uninstalling
47 Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
5. A page displays the list of products/components processed and the percentage ofcompletion. Click Next to continue.
Un-install Wizard — Status
48Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
6. A page displaying SUCCESS indicates that Veritas NetBackup KM for PATROL is nowuninstalled.
Un-install Wizard — Uninstall Results
49 Uninstalling Veritas NetBackup KM for PATROL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Loading/Unloading the KMOnce installed the KM will have to be preloaded on one of the following PATROL consoles:
PATROL Console
PATROL Central
The PATROL Agent can also be configured to automatically preload the KM.
Loading the KMBefore loading the NetBackup KM:
1. Make sure you properly installed the KM on PATROL Console and PATROL Agent systems
2. Start the PATROL Console and update the connection to all PATROL Agent systems where theNetBackup KM is installed.
3. Check the value of the PATROL Agent tuning variable, /AgentSetup/AgentTuning/pslInstructionMax, and if necessary, increase it.
Loading the KM on PATROL ConsoleTo load the KM on a PATROL Console:
1. From the PATROL Console menu bar, choose File > Load KM...
2. Select the NBU_LOAD.kml file
3. Click Open or OK.
The NetBackup KM will be loaded to the PATROL Console, and all connected PATROL Agents willstart discovering the Veritas NetBackup environment. If the automatic discovery successfullyfinds the Veritas NetBackup master/media server installation, the NBU_SETUP instance will beinstantiated.
The automatic discovery may take up to 5 minutes to instantiate the NBU_SETUP instance. Look for anyerror messages on the PATROL Console System Output Window (SOW) during the initial discovery.
If you want to save the new list of loaded files as the PATROL Console user preference:
1. From the PATROL Console menu bar, choose File > Save Configuration
2. Load the NBU_LOAD.kml file on each PATROL Console.
3. Configure the KM.
50Loading/Unloading the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Loading the KM on PATROL CentralTo load the KM on PATROL Central:
1. In the Console, right-click the Managed System and select Load Knowledge Modules... TheLoad Knowledge Modules wizard is displayed
2. Click Next
3. Select the managed systems where the NetBackup KM is to be loaded, and click Next >. Thewizard will display a list of all available .kml files for the managed systems you selected.
4. Select the NBU_LOAD.kml file for each managed system, click Next > and Finish.
The NetBackup KM will be loaded to the PATROL Central Console Server, and all connectedselected managed systems will start discovering the Veritas NetBackup environment. If theautomatic discovery successfully finds the Veritas NetBackup master/media server installation,the NBU_SETUP instance will be instantiated.
This automatic discovery may take up to 5 minutes to instantiate the NBU_SETUP instance. Look for anyerror messages on the PATROL Central System Output Window (SOW) during the initial discovery.
5. Load the NBU_LOAD.kml file on each PATROL Central Management Profile where NetBackupKM is to be loaded.
6. Configure the KM.
Configuring the PATROL Agent to Preload the KMIf you want Veritas NetBackup KM for PATROL to operate all the time, without a PATROL Consoleconnection, you'll have to add it to the PATROL Agent configuration variable /AgentSetup/preloadedKMs.
To configure the PATROL Agent to preload the KM:
1. In the Console, right-click the Veritas NetBackup icon > Configuration > Preloading.
2. Click Add to add the KM files to the list of preloaded KMs.
The same menu is used to remove the KM f iles f rom the preloaded KMs list.
51 Loading/Unloading the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Unloading the KMThis section describes the procedures for unloading (not uninstalling) the NetBackup KM fromthe PATROL Agent, PATROL Console or PATROL Central Console. Read this section if you nolonger want to use some parts of the KM; if you want to completely uninstall the KM, refer to the uninstall procedure.
When the KM is unloaded:
from a PATROL Agent: PATROL stops monitoring the Veritas NetBackup application on thatsystem when there is no connection to a PATROL Console with NetBackup KM loaded.
from PATROL Console: the PATROL Console stops displaying and monitoring the VeritasNetBackup application on any PATROL Console connected system.
Unloading the KM from the PATROL AgentTo unload the KM from the PATROL Agent:
1. In the Console, right-click the Veritas NetBackup icon and select KM Commands >Configuration > Preloading
2. Click Remove
3. Restart the PATROL Agent.
4. Repeat these steps on every PATROL Agent system (managed node) where the NetBackupKM is to be unloaded.
You can also use the utility wpconf ig (on Microsoft Windows) or xpconf ig to unload the KM. You will thenhave to remove NBU_LOAD.kml f rom the PATROL Agent conf iguration variable /AgentSetup/preloadedKMs.
The KM cannot be partially unloaded from the PATROL Agent using the above steps. If you need to unloadsome parts of the KM from the PATROL Agent, refer to the PATROL Agent Reference Manual.
52Loading/Unloading the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Unloading the KM from the PATROL ConsoleApplication classes are unloaded individually. This allows for a partial unloading of the KM toenable it to run as a reduced installation.
To unload the NetBackup KM completely or partially:
1. Remove the unwanted application classes that starts with NBU_ in the list of loadedapplication classes as described below:
With the PATROL Console for Unix:
From the PATROL Console main window choose Attributes> Application Classes...
Select a NetBackup KM application class to be removed and choose Edit>Delete.
Repeat for all classes to be removed.
With the PATROL Console for MS Windows:
From the PATROL Console tree view choose the KM tab and expand the folder ApplicationClasses.
Right-click on a NetBackup KM application class to be removed and choose Delete.
Repeat for all classes to be removed.
2. Select File>Save Configuration to save the modified list of loaded application classes as thePATROL Console user preference.
3. Repeat these steps on every PATROL Console system where the NetBackup KM is to beunloaded.
Unloading the KM from the PATROL Central ConsoleA KM can be unloaded from particular managed systems or for all systems across the monitoredenvironment. Application classes may be unloaded individually, or by selecting all classes atonce. This allows for a partial unloading of the KM to enable it to run as a reduced installation onsome or all of the managed systems.
To completely or partially unload the NetBackup KM from some or all of the managed systems:
1. Right-click the PATROL Main Map, and choose Unload Knowledge Modules...
2. Select the managed systems where the NetBackup KM is to be unloaded, and click Next>.
3. Select the application classes to be removed that starts with NBU_ for the appropriatemanaged systems, click Next> and Finish.
4. Repeat the above steps for each PATROL Central Management Profile where the NetBackupKM is to be unloaded.
53 Loading/Unloading the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Performing Post-InstallationOperationsIt is recommended to perform post installation checks once the KM is installed and loaded on thePATROL Console to ensure it properly operates. Post-installation operations include:
Configuring NetBackup Nodes
Configuring the KM user account
Verifying:
the application discovery
the instance limits
the initial setup
Restarting the PATROL Agent and PATROL Console.
54Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring NetBackup Nodes MonitoringNetBackup KM allows you to monitor several NetBackup master and media servers, andNetBackup appliances with one PATROL agent. The configuration procedure is as follows:
1. Right-click the Veritas NetBackup main instance > Configuration > NetBackup Nodes.
Configuring NetBackup Nodes Monitoring
2. Specify the NetBackup server details:
Node ID: Enter a ID for the NetBackup node. This information is only required if a unique IDcannot be generated using the hostname provided.
(Required) Hostname/IP Address/FQDN: Enter the hostname, IP address, or FQDN of thenode to be monitored.
(Required) System Type: Specify whether the NetBackup node is a UNIX/Linux or Windows
55 Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
system.
(Required) Status: Select Enable to start the NetBackup node monitoring; Disable to stopit.
3. Check the Create a separate device in TrueSight box if you want the NetBackup nodes toappear as a separate device in TrueSight OM.
4. Click Update.
A NetBackup Setup node instance appears in the PATROL Console but the monitoring will notstart until the appropriate credentials are entered using the Configuration > Login KM Command.
Configuring the KM User AccountA user account with administrative privileges must be configured in BMC PATROL to read andexecute Veritas NetBackup application programs and file systems. Depending on the operatingsystems used, several options will be available.
On Unix platforms, you can use the following user accounts:
a root user
a non-root user, such as patrol, that has sudo privileges on Veritas NetBackup to executeapplication programs and access file systems
a non-root account, such as patrol, configured in Veritas NetBackup application to administerthe Veritas NetBackup application.
On Windows platforms, you can use the following user accounts:
an administrator user
a non-administrator account, such as patrol, configured in Veritas NetBackup application toadminister the Veritas NetBackup application.
56Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
To configure the KM User Account:1. In the Console, right-click the host instance > KM Commands > Configuration > Login. The
Login Configuration dialog box is displayed:
Login Configuration dialog
2. To use:
the default PATROL Agent Account, check the Use Agent Default Account box and leavethe Username and Password fields empty
a different user account, enter the login details in the Username and Password fields
3. If a sudo user account is used:
check the Use Sudo box
click SUDO Binary File to verify the sudo binary file path
57 Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
4. If you are monitoring a remote host, click Remote Connection Settings:
Remote Connection Settings
Connection Timeout (in Seconds): Enter the number of seconds after which the connectionto the remote node will timeout.
Maximum Connections: Enter the maximum number of simultaneous connections allowedto the remote node.
Click Accept.
5. Click OK.
If the credentials are not valid, the NBULoginStatus parameter will appear in “suspicious state”after the next data collection.
58Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Verifying Application DiscoveryTo verify the application discovery:
1. Check that the NetBackup Setup instance changes to display the server type. If not, checkthe message in the NetBackup Setup instance and in the PATROL Console System OutputWindow (SOW). You can force a full discovery by right-clicking the NetBackup Setup instance> KM Commands > Force Discovery.
2. Check that the application class instances are actually instantiated. The initial data collectionmay take some time depending on the complexity of your environment (up to one hour). Ifneeded, force a data collection by right-clicking the server instance > KM Commands >Refresh Parameters.
If Veritas NetBackup master/media server is configured in a clustered environment, you willhave to enable Multi-node Mode monitoring.
Verifying the Instance LimitsBy default, Veritas NetBackup KM for PATROL monitors all the elements discovered, which mayrepresent an important workload to the PATROL agents and console. Because the monitoring ofsome elements may be irrelevant for various reasons, you can apply filters to indicate whichelements will be monitored or not.
Because increasing the number of instances may impact the performance of the KM, it is recommendedto only monitor critical elements in large environments.
59 Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
To modify the default configuration
1. In the Console, right-click the monitored node > KM Commands > Configuration> InstanceLimits
Configuring the Default Instance Limits
2. Enter the number of instances to be displayed in the console for each monitored element
3. To disable the monitoring of a specific application class, enter 0 in the relevant field
4. Click OK.
60Performing Post-Installation Operations
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Verifying the Initial SetupTo check the initial setup of the KM:
1. Check for any errors on the PATROL Console System Output Window (SOW) or in the NBU.logfile available in PATROL_HOME/log
2. Check whether the discovered files and directory paths are correct, using the menu Configuration > Paths from the server instance.
3. Refer to the label of the server instance to check whether the discovered Node Type iscorrect using the menu Configuration > Node Type from the server instance.
4. Check the InfoBoxes and Parameters of all the NetBackup KM instances and verify that theyare properly set.
5. Under each container instance, open all detail parameters (text parameters with names inthe format NBU<Object>Details), and check for error messages.
6. Check the new value of NBULoginStatus set after completion of all data collection. If either isnot in OK state, open the annotation point to determine the cause of the error.
7. After the KM has been running for at least an hour:
Right-click the server instance > KM commands > KM Status from the Veritas NetBackupinstance. A report is displayed, detailing information on the managed system. Checkthrough the report for any warnings or alarms. If any errors are found during any of theabove steps (including any incorrect data in Infoboxes or any warnings or alarms in the KMStatus report), determine the cause(s) and take steps to resolve these errors. You mayneed to refer to the User Guide, or contact Technical Support, attaching the KM Statusreport.
If needed, click Save As Task to open the report in a task window. You could later save it asa text file or print it.
7. The KM installed on the master server may monitor the same storage, disk pools, diskvolumes, robotic libraries & drives which are already monitored through the media servers.This may be unnecessary and can trigger duplicate alerts. You can disable these componentson either master server or media server by setting their instance limit to 0 (zero), using themenu Configuration> Instance Limits.
Restarting PATROL Agent and PATROL ConsoleRestarting the PATROL Agent and PATROL Console is optional but often a good practice toconfirm that the NetBackup KM operates correctly.
In addition, the PATROL Agent restart will force all KM discoveries and data collections to startimmediately.
62
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
This section provides detailed information about the integration of NetBackup KM into the BMCFramework.
Integrating with BMC Portal1. Log on to BMC Portal with appropriate credentials to add infrastructure elements.
2. Click on Configure tab.
3. Under Tasks, select Elements to open the Elements page.
4. Click Add.
5. Select Infrastructure Element, and click Next.
6. Select appropriate RSM, and click Next.
7. Enter the label for the element, select PATROL Integration, and click Next.
8. Select/create a group name, and click Next.
9. Select appropriate method to discover the PATROL Agent hosts, and click Next.
10. Fill the required details for discovering the PATROL Agents, and click Commit.
Integrating with BMC TrueSightOperations ManagementNo specific integration steps need to be performed. To know how to use Veritas NetBackup KMfor PATROL in BMC TrueSight Operations Management, please refer to the TrueSight OperationsManagement - Veritas Backup Monitoring documentation.
64
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Veritas NetBackup KM for PATROL helps ensure the availability, maximum performance, andintegrity of your backup servers, thereby protecting associated data sets.
Administering Veritas NetBackupVeritas NetBackup KM for PATROL provides secure server administration menus, which can beexecuted by PATROL Console users, if they have appropriate privileges. They can moreespecially:
start or stop the master/media server
assign, deny, or resubmit mount requests
bring standalone or robotic drives online or offline.
Starting the Master/Media ServerIn the Console, right-click the server instance > KM Commands > Administration and select StartMaster Server or Start Media Server depending on the server that you wish to start.
Starting the Master/Media Server
65 Administering Veritas NetBackup
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Stopping Master/Media ServerIn the Console, right-click the server instance > KM Commands and select Stop Master Server orStop Media Server depending on the server that you wish to stop.
Stopping the Master/Media Server
Assigning, Denying, or Resubmitting MountRequestsWhen a mount request appears, its parameter NBURequestElapsed is immediately set to alert(Warning or Alarm depending on the elapsed time). The mount request can be assigned, denied,or re-submitted using the menus from the mount request instance:
1. In the Console, right-click the Mount Request instance > KM Commands > Administration
2. Select one of the following options:
Assign
Deny
Resubmit
3. Click Yes to confirm your choice.
A similar menu is available at the Mount Requests instance level to perform any of these actions on allmount requests at once.
66Administering Veritas NetBackup
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Bringing Standalone Drives Online or OfflineTo bring a standalone drive offline or offline:
1. In the Console, right-click the Standalone Drive instance > KM Commands
2. Select one of the following options:
Online Drive
Offline Drive
3. Click Yes to confirm your choice.
Bringing Robotic Drives Online or OfflineTo bring a robotic drive offline or offline:
1. In the Console, right-click the Robotic Library Drive instance > KM Commands
2. Select one of the following options:
Online Drive
Offline Drive
3. Click Yes to confirm your choice.
67 Administering Veritas NetBackup
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the KMThe configuration instructions provided in this section should be followed on all PATROL AgentSystems where Veritas NetBackup KM for PATROL is installed.
Before configuring the KM, make sure:
the KM is loaded on the PATROL Console
the Veritas NetBackup instance is displayed in the Console.
Configuring PathsThe solution automatically discovers the installation, binary, and library paths. This informationcan however be overridden.
Altering these paths may impact the operation of the KM.
To configure paths:
1. In the Console, right-click the server instance > KM commands > Configuration > Paths
2. In the KM section, verify and possibly modify the Home, Temp, and Debug Directory Paths
3. In the NetBackup section, verify and possibly modify the Installation, the Log, and theRemote Temp Directory (remote nodes only) Paths
4. In the Binary Paths and Library Paths sections:
From the list, select the paths to be removed
In the Path field, enter the new path(s) to be included. If several paths are to be entered,separate them with a colon (:).
5. Click OK.
If you want to rediscover the paths, empty all f ields, click OK, and restart the PATROL Agent.
68Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Specifying the Node TypeYou may have to manually indicate the type of node monitored if the discovery fails to recognizeit:
1. In the Console, right-click the server instance > KM Commands > Configuration > Node Type
2. Select the node type (Master or Media Server)
3. Click OK.
Configuring the Multi-Node Monitoring ModeIf the Veritas NetBackup environment is installed in a cluster using Veritas Cluster Server, VeritasCluster File System, Oracle Solaris Cluster, or Microsoft Cluster, the NetBackup KM must beinstalled on all the cluster nodes to enable continuous monitoring and avoid single point offailure. To avoid duplicate alerts from multiple nodes, it is recommended to configure thesolution to operate in multi-node monitoring mode.
At that time, the Multi-node monitoring mode feature cannot be used if one or more cluster nodes aremonitored remotely.
To configure the multi-node monitoring mode:
69 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
1. In the Console, right-click the server instance > KM Commands > Configuration > MonitoringMode
Configuring the Multi-Node Monitoring Mode
2. Select Multi-node Mode
3. Select the appropriate Cluster Application
4. Indicate the Failover Group Name. Leave this field blank if you previously selected VeritasCluster File System. The NetBackup KM will then monitor the entire cluster from the activemaster system, which is identified by the vxdctl -c mode command. This method requiresvxconfigd in enable mode with its clustered state active.
5. Enable Remote PATROL Agent Checking to check the monitoring status of the other nodesand click OK
6. Indicate all the information required to communicate with the remote PATROL Agent(authentication server, protocol, port number, and credentials)
7. Click OK.
Veritas NetBackup will then be monitored through the master or online node. The other nodes,which are standing by for a failover, will be in passive multi-node mode and only the VeritasNetBackup components will be monitored.
If a managed node is unable to determine the system which should be in Active Multi-node Mode, it willchange to Temporary Single-node Mode.
70Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Filtering Elements to MonitorBy default, the solution monitors all the elements discovered, which may represent an importantworkload to the agents and servers. Because the monitoring of some elements may be irrelevantfor various reasons, you can apply filters to indicate which elements will be monitored or not:
1. In the Console, right-click one of the following instances depending on the elements thatyou wish to monitor:
Clients > KM Commands > Configuration > Clients to filter clients to be monitored
Daemons > KM Commands > Configuration>Daemons to filter daemons to be monitored
Databases > KM Commands Configuration > Databases to filter databases to be monitored
Logs > KM Commands > Configuration > Logs to filter logs to be monitored. Only the dailymessages file will be monitored on AIX and Microsoft Windows platforms since there is noASCII format system log file to monitor
Media Server > KM Commands > Configuration > Media Server to filter media servers to bemonitored
Policies > KM Commands > Configuration > Policies to filter policies to be monitored.Please note that policy monitoring is disabled on media servers and in passive multi-nodemode and that only the backup/restore jobs of the monitored policies will be monitored
Policy > KM commands > Configuration > Policy Clients to filter policy clients to bemonitored
Robotic Libraries > KM Commands > Configuration > Robotic Libraries to filter roboticlibraries to be monitored
Robotic Drive > KM Commands > Configuration>Robotic Drives to filter robotic drives to bemonitored
Standalone Drives > KM Commands > Configuration > Standalone Drives to filterstandalone drives to be monitored
Volume Pools > KM Commands > Configuration>Volume Pools to filter robotic volumepools to be monitored
Storages > KM Commands > Configuration > Storages to filter storages to be monitored
Disk Pool > KM Commands > Configuration > Disk Pools to filter disk pools to be monitored
Disk Volume > KM Commands > Configuration > Disk Volumes to filter disk volumes to bemonitored
These menus are also available f rom the child instances.
71 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Client Configuration dialog
The [ALL] entry ensures that all the elements found during PATROL discovery are instantiatedand monitored.
72Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. To enable elements for monitoring:
In the current configuration list, select the elements to enable
Select Enable
Click Update
A log f ilter will have to be conf igured if you enable log f iles for monitoring.
3. To disable elements for monitoring:
In the current configuration list, select the elements to disable
Select Disable
Click Update
All jobs associated to disabled policies are not monitored.
Disabled instances will be instantiated in an OFFLINE state. Commands will not be executed, thus leavingparameters not set.
4. To delete elements for monitoring:
In the current configuration list, select the elements to delete
Select Delete
Click Update
5. To add a new element to monitor:
Type the name of the element to be monitored
If needed, enter a description
From the Status list, select Enable
Click Update.
To revert to the default monitoring conf iguration, type “[default]” as a new entry and click Update.
6. Resume the procedure for all the application classes for which you wish to apply monitoringfilters.
73 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Blocking the Remote Monitoring of a NetBackup ServerThe server owner/administrator may want to stop the monitoring of a remote NetBackup serverwhen performing maintenance work on this server. The monitoring can be blocked from therelevant NetBackup server and will not require making any changes from the monitoring PATROLAgent system(s). The administrator will just have to create a file named NBU_block under theRemote Temp Directory Path. By default, this path is set to /var/tmp (on UNIX/Linux) or C:\Windows\Temp (on Windows).
The PATROL Agent monitoring this NetBackup server will detect the block file during the nextdiscovery cycle and turn the server instance to NetBackup Setup (Monitoring Blocked).
To resume monitoring, the administrator will just have to delete the NBU_block file.
Configuring Monitoring PeriodsBy default, Veritas NetBackup KM for PATROL monitors all mount requests for 1 day, allscheduled jobs that completed successfully for 1 day and any other scheduled job for 3 days. Youcan however modify these settings to better suit your requirements.
Increasing the monitoring period may affect the performance of the application.
74Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the Jobs Monitoring Period
1. In the Console, right-click the Jobs instance > KM Commands > Configuration > Jobs
Job Filter Configuration dialog
75 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Indicate how long the jobs in OK, Suspicious, and Failure status will be monitored. If you:
decrease the monitoring period, older jobs will be destroyed on the next data collectioncycle
increase the monitoring period, you will have to force a full data collection to ensure alljobs are instantiated. To force data collection, right-click the Jobs instance > KM Commands> Force Full Collection
3. Select Keep Monitoring Active Jobs Indefinitely if you want to endlessly monitor active jobs
4. Select Ignore Inactive Jobs initially if you want the inactive jobs not to be created in theinitial discovery cycle. Initially discovering and monitoring inactive jobs may impact theperformance of the application
5. Select Ignore Alerting for Child Jobs if you do not want to be notified when a job failureoccurs on child jobs.
6. Click OK.
Configuring the Mount Request Monitoring Period1. In the Console, right-click the Mount Requests instance > KM Commands > Configuration >
Mount Requests
Mount Request Filter Configuration Dialog
2. Indicate how long the mount requests will be monitored. If you decrease the monitoringperiod, older mount requests will be destroyed on the next data collection cycle
3. Click OK.
76Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the Elements StatusThe status of an element is determined by the State parameter and by the status mapping rule.This mapping rule indicates which states will trigger a warning or an alarm on the Statusparameter. It can be configured as follows:
1. In the Console, right-click one of the instance for which you want to configure the status andselect > KM commands > Configuration > Instance Status
Daemon Status Configuration dialog
77 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. In the Warning Filter State Rules list, select the states that will not trigger a warning
3. If needed, apply a time condition to a specific state. For example, if you want to trigger awarning when the Growing state of the Daemon instance lasts more than 600 minutes:
From the State list, select 7 (Growing)
From the Condition list, select >
In the Minutes field, enter 600
4. In the Alarm Filter State Rules list, select the states that will not trigger an alarm
5. If needed, apply a time condition to a specific state. For example, if you want to trigger analarm when the Not Running state of the Daemon instance lasts more than 30 minutes:
From the State list, select 9 (Not Running)
From the Condition list, select >
In the Minutes field, enter 30
6. Click Update.
To revert to the default status mapping rule for either f ilter, select [default] f rom the list of states and clickUpdate.
7. Resume the procedure for all the application classes for which you wish to apply monitoringfilters.
When a NetBackup client is not installed on the same network as the master server, the NBUClientStatus parameter can trigger false alarm when the KM fails to ping the client. Anadditional script is available to avoid this situation. Use the following scripts when someNetBackup clients cannot be pinged from the master server:
On UNIX/Linux Master serverscd $PATROL_HOME/lib/NBU
mv NBU_client_status.sh NBU_client_status_ping.sh
mv NBU_client_status_no_ping.sh NBU_client_status.sh
On Microsoft Windows Master serverscd %PATROL_HOME%\lib\NBU
ren NBU_client_status.cmd NBU_client_status_ping.cmd
ren NBU_client_status_no_ping.cmd NBU_client_status.cmd
78Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the Node StatusNetBackup KM allows you to choose which daemons will be used to determine the node status:
1. In the Console, right-click the server instance > KM Commands > Configuration > Node Status.
Configuring Node Status
79 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. In the Monitored daemons list, select the daemons that will not be used to determine thenode status
3. In the Daemon field, list the daemons to be used to determine the node status. The Daemonlist must be comma-delimited.
4. To use default settings, type [default] in the Daemon field
5. Click Update.
The NUBNodeStatus parameter will then be set to:
Suspicious if any command run by the NetBackup KM returns a master/media server errormessage
Failure if any configured daemon is not running. Several recovery actions will then beinitiated.
80Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring Mount Requests Date/TimeFormatThe NetBackup KM uses Veritas NetBackup commands to determine the date and time of eachmount request (used for calculating the elapsed time since the mount request was issued).Depending on your local system time zone and date/time format, the application may return adifferent date/time format.
To customize the mount request date/time format:
1. In the Console, right-click the Mount Requests instance > KM Commands > Configuration >Mount RequestsDate/Time Format
Mount Request Date/Time Format Configuration dialog
81 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Indicate the expected Date/Time Format.
3. Indicate a PSL-compatible Time Zone String (e.g.: NZDT, NZST, EDT, EST, GMT-1200, etc.).
4. Click OK.
The new date/time format is then applied to all mount requests.
To revert to the default settings, blank out the Date/Time f ield and/or the Time Zone f ield and click OK. TheTime zone f ield used will be the local time zone on the managed node.
82Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the Log FilterA log error filter can be configured to specify the regular expressions that will generate a warningor an alarm. Each time the KM will find these expressions in a log file or in NBULogText, the errormessage will be written to the NBULogAlarmText or NBULogWarningText parameter. By default,the default log filter is configured for the daily Veritas NetBackup messages file and the systemlog file. If you enabled additional log files for monitoring, you will have to customize the logfilter by adding appropriate expressions for those log files.
For more information about the possible error messages, refer to the Veritas NetBackup SystemAdministrator’s Guide and the Veritas NetBackup Troubleshooting Guide.
To configure the log error filter:
1. In the Console, right-click the Logs instance > KM Commands > Configuration > Logs Filter
Log Filter Configuration dialog
83 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. In the Warning Filter Expressions list, select the expressions that will not trigger a warning
3. In the Alarm Filter Expressions list, select the expressions that will not trigger an alarm
4. To add a new regular expression to the warning or alarm filter:
In the Expression field, indicate the regular expression to be included (e.g.: skipping)
Select Include
Regular expressions are case-sensitive.
5. To exclude a regular expression from the warning or alarm filter:
In the Expression field, indicate the regular expression to be excluded (e.g.: otlsol01). Youcan also limit the exclusion to a particular expression already listed by using standardwildcard syntax, such as “skipping .* otlsol06”.
Select Exclude
6. Click Update.
To revert to the default settings for either f ilter, type [default] as a new error expression for that f ilter, andclick Update. If you revert to the default settings when accessed from the log instance level, the settings willrevert to the parent or container instance level. To revert to the shipped default settings (as shown above),access this dialog from the log container instance. From this level you will also have the option to reset theconf iguration of any modif ied child instances.
84Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring the Log Scan LimitThe NetBackup KM scans log files by reading the new log entries since the last data collectioncycle. By default, only 500 Kbytes of data is scanned for each log file during each data collectioncycle. This log scan limit can however be modified to better suit your requirements.
Increasing the Log Scan Limit may impact the performance of the data collector (NBULogCollector), theKM, and the PATROL Agent.
To customize the log scan limit:
1. In the Console, right-click the Log(s) instance > KM Commands > Configuration > Log(s) ScanLimit
Customizing the Log Scan Limit
2. Indicate the amount of data that will be read by the KM during each data collection cycle.
3. Click OK.
85 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring Jobs Exit Status FilterThe NBUJobState parameter is set according to the completion state and the exit status reportedby Veritas NetBackup. The parameter is set to:
completed if the job completes with exit status 0 (zero)
Aborted if the exit status code is 150 (terminated by administrator)
Failed if the exit status is included in the Failure filter
Error if the exit status is included in the Erroneous filter
By default, all other exit status codes are set to Failed. This setting can be modified by moving orremoving the keyword [ALL] in the Job Exit Status Filter.
To configure the exit status filter:
1. In the Console, right-click the Jobs instance > KM Commands > Configuration > Jobs ExitStatus Filter
Configuring the Job Exit Status
86Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Select the exit status codes from the current filters, which should be removed, if any
3. Enter exit status code to be added to the erroneous or failure filter, which will set NBUJobState to Error or Failed respectively. Multiple comma (,) delimited codes or a rangeusing a hyphen (-) can be entered at the same time.
4. Click Update.
5. Once all required changes are made, click Close to load the filters.
These filters will apply to all jobs from the next job collection cycle (NBUJobCollector).
87 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring Policy Backup RestrictionNetBackup KM can be configured to trigger a warning when a backup is started during a specificperiod of time:
1. In the Console, right-click:
the Policies instance > KM Commands > Configuration> Policies Backup Restriction to applythis customization to all policies
a Policy instance > KM Commands > Configuration> Policy Backup Restriction to apply thiscustomization to a specific policy
Policy Backup Restriction Window dialog
2. Select Enabled
3. Indicate the Restriction Start and End Time. The restriction window should at least last 5minutes.
4. Click OK.
88Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuring Alert AcknowledgementBy default, alerts will automatically be acknowledged unless you modified the settings to allowmanual acknowledgement.
Manual acknowledgement may impact the performance of the application and of the PATROL Agent ifthe number of alerts waiting to be acknowledged constantly increases.
Configuring Logs Alert Acknowledgement
By default, log alerts are automatically acknowledged when new ones are detected. To changethe default behavior:
1. In the Console, right-click the Log(s) instance > KM Commands > Configuration > Log(s) AlertAcknowledgement
Configuring Log Alert Acknowledgement
89 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Indicate whether the warning and alarm messages will be manually or automaticallyacknowledged
3. Click OK.
Configuring Jobs Alert Acknowledgement
By default, the alerts triggered on the NBUJobStatus parameter for the completed jobs are notacknowledged. If you want these alerts to be automatically acknowledged, you will have toconfigure the job alert acknowledgement as follows:
1. In the Console, right-click the Jobs instance > KM Commands > Configuration > Jobs AlertAcknowledgement
Configuring Job Alert Acknowledgement
2. Indicate whether the warning and alarm messages will be manually or automaticallyacknowledged
3. Click OK.
90Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Forcing the Classic ModeVeritas NetBackup KM for PATROL can either be configured from a BMC PATROL Console (ClassicMode) or BMC TrueSight Operations Management. When the KM is installed on a PATROL Agent,which is managed by Central Monitoring Administration (CMA), all the KM configuration menusare disabled in the PATROL Console. To configure NetBackup KM from a PATROL Console, youneed to force the KM to run in Classic Mode.
This will disconnect NetBackup KM from receiving configuration from Central MonitoringAdministration. Any monitoring that was configured in CMA and used by the PATROL Agent willbe removed and replaced by the configuration made from the PATROL Console. However, thiswill not delete the policies created in CMA from the configuration.
Any configuration for NetBackup KM received from Central Monitoring Administration will be ignored.
To force the KM to run in Classic Mode:
1. In the PATROL Console, right-click the Veritas NetBackup icon > KM commands > Configuration> Force Classic Configuration Mode
Forcing Classic Mode - Force Classic Configuration Mode
91 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Check Force the KM to run in Classic mode and click OK.
NetBackup KM will now start running in Classic Mode, enabling you to use the KM Configurationmenus.
To conf igure the KM in TrueSight OM, follow the above procedure and uncheck Force the KM to run inClassic mode. All conf igurations made through the PATROL Console will then be ignored.
Refreshing ParametersThis section describes how to manually refresh parameters without waiting for an automaticpolling cycle.
Forcing All Discoveries
To force all discoveries, right-click the server and select:
Refresh Process Cache to refresh the PATROL Agent process cache
Force Discovery.
The discovery will then be forced on all the KMs loaded on the PATROL Agent and on all the KMapplications classes.
Forcing All Data Collectors
To force all data collectors, right-click the server instance and select:
Refresh Process Cache to refresh the PATROL Agent process cache
Refresh parameters to force all data collectors at the same time.
The NetBackup KM data collectors and all the data collectors defined under the applicationclasses loaded on the PATROL Agent will then be refreshed.
Forcing Selected Data Collectors
This option is only available from a PATROL Developer Console.
92Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
1. Right-click the server instance and select Refresh Process Cache to refresh the PATROL Agentprocess cache .
2. Force a data collector to execute immediately as follows:
With the PATROL Console for MS Windows
Right-click on the server instance and choose Parameters without Icons...
Select the required data collector.
Click Update.
With the PATROL Console for Unix
Right-click on the server instance and choose Customize > Parameters...
Select the required data collector.
Click Options > Update.
With the PATROL Central Operator Console
Right-click on the server instance and choose Properties
Click on the Parameter List tab
Select the required data collector.
Click Update.
Forcing Full Data Collection for Jobs
By default, the NBUJobCollector only searches for new jobs started since the last collection cycle.However, it can be forced to search for all jobs within the monitored time period during the nextcollection cycle.
To force full data collection for jobs, right-click the Jobs instance and select Force Full Collection.
If the Jobs container instance is not instantiated, this menu command cannot be accessed. The PATROLAgent needs to be restarted to force a full data collection for jobs.
Reloading CommandsAll new commands are reloaded automatically but some situations may require a manualcommands reload. To do so, in the Console, right-click the server instance > KM Commands >Reload Commands.
93 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Enabling the Debug ModeWhen you encounter an issue and wish to report it to Sentry Software, you will be asked toenable the Debug Mode and provide the debug output to the Sentry Software support team.
Enabling the Debug Mode
1. In the Console, right-click the server instance > KM Commands > Configuration > Debug. TheNetBackup KM Debug Configuration dialog is displayed:
Enabling the Debug Mode
94Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
2. Select On for the debug switch(es) you want to enable. Refer to the table below to know theapplication classes and collector parameters included in the debug switch:
Object Debug Switch Application Classes Collector Parameters
Server NBU_SERVER NBUCreateDistributionNBUUpdateAgent
Database NBU_DATABASE_CONTAINERNBU_DATABASE
NBUDatabaseCollector
Log NBU_LOG_CONTAINERNBU_LOG
NBULogCollector
Client NBU_CLIENT_CONTAINERNBU_CLIENT
NBUClientCollector
Media Server NBU_MEDIASERVER_CONTAINERNBU_MEDIASERVER
NBUMediaServerCollector
Robotic Library/Drive NBU_LIBRARY_CONTAINERNBU_LIBRARYNBU_LDEVICENBU_DEVICE_CONTAINERNBU_DEVICE
NBULibraryCollectorNBUDriveCollector
Daemon NBU_DAEMON_CONTAINERNBU_DAEMON
NBUDaemonCollector
Volume Pool NBU_POOL_CONTAINER NBUPoolCollector
Backup NBU_POLICY_CONTAINERNBU_POLICYNBU_PCLIENTNBU_JOB_CONTAINERNBU_JOBNBU_MOUNT_CONTAINERNBU_MOUNT
NBUPolicyCollectorNBUJobCollectorNBURequestCollector
Disk Storage / Pool / Volume NBU_STORAGE_CONTAINERNBU_STORAGENBU_DPOOLNBU_DVOLUME
NBUStorageCollector
3. Set the Debug Options:
In the Debug End Time field, indicate the date and time after which debug information willno longer be logged.
In the Debug Path field, indicate where the debug file will be stored (by default:<PATROL_HOME>/lib/NBU/debug on UNIX/Linux systems; %PATROL_HOME%\lib\NBU\debug on Microsoft Windows systems). The debug folder must have at least 10MB ofavailable disk space and read, write and execute permissions for both PATROL Agent userand the NetBackup KM login user
Select Send to File(s) to write all debug messages in a file or set of files.
Select Send to Task Window to view the debug messages as they occur in the NBU DebugOutput window. Before selecting this option, make sure the PATROL Console is connectedto the PATROL Agent.
Select Both (Recommended) to send the debug messages both to a file and task window.
95 Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
4. Click OK first to start NetBackup KM debugging
5. Click Yes to reload the KM and capture debug from the initial collection cycle.
Disabling the Debug Mode
The debug switches will be turned off automatically when the debug end time is reached. A tar/zip file is then automatically created under <PATROL_HOME>/lib/NBU/ and can be sent to theBMC Support for help. It is also recommended to check the SOW or NBU.log file, stored in<PATROL_HOME>/log, for any error.
To manually stop debugging:
1. Access the NetBackup KM Debug Configuration dialog
2. Select Off for the debug switch(es) you want to disable
3. Click OK.
Preparing the Debug Files for Sending to Sentry Software
If you chose to only send the output to a task window, you can save the debug output as follows:
Right-click in the NBU KM Debug Output for <node-id> window.
Select Save As and specify a location to save data.
If you chose to send debug information to file(s), you will be asked to prepare the debug files forsending to Sentry Software:
Click Yes to compress the files into a:
nbu_km_debug_<node-id>_<date>_<time>.tar.Z file (UNIX/Linux systems). This file couldlater be found in $PATROL_HOME/lib/NBU/
nbu_km_debug_<node-id>_<date>_<time>.zip file (Windows systems). This file could laterbe found in %PATROL_HOME%\lib\NBU\
Click No if you do not want to compress the files. You will then be asked if you want to retainor delete them.
If the compressed f ile is not created successfully, you can create it manually by including all f iles and sub-directories under $PATROL_HOME/lib/NBU/ (on UNIX/Linux) or %PATROL_HOME%\lib\NBU\ (on MicrosoftWindows).
96Configuring the KM
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Appending Output Data to Existing Files
If you want to gather output from several debug sessions:
1. Disable the debug mode
2. Click No when asked to prepare the files for sending
3. Choose to Retain the debug files.
4. Start the next debug session.
5. Choose to append the output data to existing files.
Acknowledging AlertsBy default, alerts are acknowledged automatically. If you modified the alert acknowledgementdefault settings, you'll have to manually acknowledge alerts.
Manually Acknowledging Log Alerts
When an error is detected in a monitored log file, it will either appear in NBULogAlarmText orNBULogWarningText and will respectively trigger an Alarm or a Warning on NBULogAlarmCountor NBULogWarningCount.
To acknowledge alerts:
1. In the Console, right-click the Log instance > KM Commands > Log Alert Acknowledgement
2. Select:
Warning to view, select, and individually acknowledge errors in the NBULogWarningTextparameter
Alarms to view, select, and individually acknowledge errors in the NBULogAlarmTextparameter
All to acknowledge all alerts (Warnings and Alarms) at once without viewing
Manually Acknowledging Job Alerts
For a particular job instance, if the NBUJobStatus has a value of 1=Suspicious or 2=Failure, it willbe set to alert with a status of Warning or Alarm respectively. These alerts can be acknowledgedusing the menu Acknowledgement > Alert from the relevant job instance.
To acknowledge job alerts:
1. In the Console, right-click the Jobs instance > KM Commands > Acknowledgement
2. Select:
Acknowledgement > Warnings to view and acknowledge alerts for all jobs with a status of
97 Acknowledging Alerts
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Warning.
Acknowledgement > Alarms to view and acknowledge alerts for all jobs with a status ofAlarm.
Acknowledgement > All to view and acknowledge all job alerts (Warnings and Alarms) atonce
Generating ReportsFollowing is a list of reports available in Veritas NetBackup KM for PATROL.
Daemons > Reports > Daemon List - lists all running Veritas NetBackup daemons
Databases > Reports > Database Backup Information - reports information about the last catalogdatabase backup
Logs > Reports > Messages List - reports all messages logged in the past 24 hours
Mount Requests > Reports > Pending Requests - reports a list of all mount requests
<Policy instance> > Reports > Policy Schedule - displays the schedule for the selected policyinstance
Robotic Libraries > Reports > Drive Cleaning Statistics or Standalone Drives > Reports > DriveCleaning Statistics - reports the drive cleaning statistics on the current master/media server
<Robotic Library instance> > Reports > Robotic Library Contents - reports the contents of theselected robotic library instance
<Volume Pool instance> > Reports > Media List - reports information on all media in theselected volume pool instance
<Volume Pools > Reports > Available Media - reports all available media across all volumepools.
Reports can be saved as a task window by clicking Save As Task. You could then save them as atext file or print them.
99
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Introduction
This chapter provides statistical information about resources, operating status, and performancesmanaged by Veritas NetBackup KM for PATROL. It contains tables describing the parameters usedin the KM, grouped by Application Classes, and provides a brief description of each parameterand its default settings.
100
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_CLIENT_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUClientCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUClientCollectorExecTime", 0);
Seconds Warning:> presetvalue orobservedmaximum(default)
CollectionStatus
NBUClientDetails Set by NBUClientCollector. Displaysall data returned to the standardout from commands executed by thedata collector.
n/a n/a n/a
101 NBU_CLIENT_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Clients Accesses the dialog for specifying which clients are to be monitored by the NBUKM. By default, all clients configured on the master server are monitored.
Configuration > ClientsStatus
Accesses the global configuration for determining the client status formonitored client instances.By default, following NBUClientState to NBUClientStatus mapping rule is used:
102NBU_CLIENT_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_CLIENTIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUClientState Set by NBUClientCollector. Displaysthe state of the client as reported inthe command executed by the datacollector.
0 =Running1 =Connection Refused2 = AccessDenied3 = ClientDown-1 =Unknown
None Availability
NBUClientStatus Set by NBUClientCollector. Monitorsthe status of the client. This statusis determined by the client statusmapping rule defined in the KMcommand Configuration > Client(s)Status. If this status parameterchanges to warning or alarm state,the recovery action will trigger anevent and annotate the last datapoint.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUClientSummary Set by NBUClientCollector.Summarizes the client informationas reported in commands executedby the data collector.
n/a None n/a
103 NBU_CLIENT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Name Name of the Veritas NetBackup client.
Description Description of the Veritas NetBackup client.
Hardware Hardware platform of the client.
Operating System Operating system of the client.
Status Status of client connectivity from the current node.
Application Name of the application installed on the client that responds to the connectionrequest.
Version Version number of the application installed on the client.
Installation Path Installation path of the application on the client.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Client Sets the client instance to be enabled or disabled for monitoring by the NBUKM.
Configuration > ClientStatus
Accesses the individual configuration for determining client status for theselected client instance. By default, the global NBUClientState toNBUClientStatus mapping rule is used, as configured at the container level.
104NBU_CLIENT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DAEMON_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDaemonCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUDaemonCollectorWarn", 3600);
Seconds Warning> presetvalue orobservedmaximum(default)
CollectionStatus
NBUDaemonDetails Set by NBUDaemonCollector.Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
105 NBU_DAEMON_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Daemon List Lists all running Veritas NetBackup daemons.
Configuration > Daemons
Accesses the dialog for specifying which daemons are to be monitored by theNBU KM.By default the following daemons are monitored.
Configuration > Daemons Status
Accesses the global configuration for determining the daemon status formonitored daemon instances.By default the following NBUDaemonState to NBUDaemonStatus mapping ruleis used:
106NBU_DAEMON
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DAEMONIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDaemonCPUDuration
Set by NBUDaemonCollector.Displays the CPU secondsconsumed by the daemon.
Seconds None Statistics
NBUDaemonCPUUtilization*
Set by NBUDaemonCollector.Displays the percentage of CPUused by the daemon.
Percentage(%)
None Statistics
NBUDaemonMemorySize*
Set by NBUDaemonCollector.Displays the core image size of thedaemon in the virtual memory.
Kilobytes(KB)
None Statistics
NBUDaemonProcessCount
Set by NBUDaemonCollector.Displays the number of daemonprocesses/threads found.
Processes None Statistics
107 NBU_DAEMON
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUDaemonState Set by NBUDaemonCollector.Displays the state of the daemon asreported in the command executedby the data collector.
0 =Running1 =Sleeping2 =Waiting3 = Queued4 =Intermediate5 =Terminated6 =Stopped/Disabled7 =Growing8 =Nonexistent/NotResponding9 = NotRunning-1 =Unknown
None Availability
NBUDaemonStatus Set by NBUDaemonCollector.Monitors the status of the daemon.This status is determined by thedaemon status mapping ruledefined in the KM command Configuration>Daemon(s) Status.Default mapping rule is:
Nonexistent/Not Responding > Failure
Not Running > Failure
Terminated, Stopped, Disabled >Suspicious
Growing, Unknown > Suspicious
All other states > OK
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDaemonSummary Set by NBUDaemonCollector.Summarizes the daemoninformation as reported bycommands executed by the datacollector.
n/a n/a n/a
108NBU_DAEMON
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the Veritas NetBackup daemon.
Description Description of the Veritas NetBackup daemon.
PID Process ID of the daemon.
PPID Parent process ID of the daemon.
Owner Owner of the daemon.
Status Status of the daemon as reported in the PATROL Agent process cache.
Command Command that started the daemon.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Daemon Sets the daemon instance to be enabled or disabled for monitoring by the NBUKM.
Configuration > DaemonStatus
Accesses the individual configuration for determining daemon status for theselected the daemon instance. By default, the global NBUDaemonState toNBUDaemonStatus mapping rule is used, as configured at the container level.
109 NBU_DAEMON
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DATABASE_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDatabaseBackupElapsed*
Set by NBUDatabaseCollector.Displays the elapsed time since thelast successful database backup.The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Hours Alarm: -1Warning: 24and over
Statistics
NBUDatabaseCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUDatabaseCollectorWarn",3600);
Seconds Warning:> presetvalue orobservedmaximum(default)
CollectionStatus
NBUDatabaseDetails Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
NBUDatabaseStatus Set by NBUDatabaseCollector.Monitors the status of theNetBackup database (NBDB). If thisstatus parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
availability
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
110NBU_DATABASE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Last Backup Date & time when the catalog database was last backed up.
Last Backup Mode Backup mode of the last backup of the catalog database.
Last Backup Job ID Identifier of the last catalog database backup job.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
111 NBU_DATABASE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Reports > DatabaseBackup Information
Reports information about the last catalog database backup.
Configuration > Databases
Accesses the dialog for specifying which catalog databases are to be monitoredby the NBU KM.By default, following database paths are monitored. These database paths arerelative to Veritas NetBackup installation directory (for example /usr/openv onHP-UX).
112NBU_DATABASE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DATABASEIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDatabaseFSSpaceUsedPercent*
Set by NBUDatabaseCollector.Monitors the percentage of spaceused by the file system where thedatabase resides. If this parameterchanges to warning or alarm state,the recovery action will trigger anevent.
Percentage(%)
Warning:95- 98Alarm: 98-100
Statistics
NBUDatabaseSpaceAvailable
Set by NBUDatabaseCollector.Monitors the amount of assignedspace remaining available for useby the catalog database. If thisparameter changes to warning oralarm state, the recovery actionwill trigger an event.
Megabytes Warning: 2-5Alarm: 0-2
Availability
NBUDatabaseSpaceGrowthRate
Set by NBUDatabaseCollector.Displays the growth rate of thespace used by the catalogdatabase.
Megabytesperseconds(MB/s)
None Statistics
NBUDatabaseSpaceUsed Set by NBUDatabaseCollector.Displays the amount of assignedspace used by the catalogdatabase.
Megabytes None Statistics
NBUDatabaseSpaceUsedPercent*
Set by NBUDatabaseCollector.Monitors the percentage ofassigned space used by the catalogdatabase. If this parameter changesto warning or alarm state, therecovery action will trigger anevent.
Percentage(%)
Warning:95- 98Alarm: 98-100
Statistics
NBUDatabaseSummary Set by NBUDatabaseCollector.Summarizes the databaseinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
113 NBU_DATABASE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the Veritas NetBackup catalog database.
Description Description of the Veritas NetBackup catalog database.
Path Full file path of the catalog database.
Last Purge Date & time when the catalog database was last purged.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Database
Sets the database instance to be enabled or disabled for monitoring by the NBUKM.
114NBU_DATABASE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DEVICE_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDriveCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUDriveCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUDriveDetails Set by NBUDriveCollector. Displaysall data returned to the standardout from commands executed by thedata collector.
n/a n/a n/a
115 NBU_DEVICE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Drive CleaningStatistics
Reports the drive cleaning statistics on the current master/media server.
Configuration > Standalone Drives
Accesses the dialog for specifying which standalone drives are to be monitoredby the NBU KM. By default, all local and remote standalone drives aremonitored for a master server and all local standalone drives are monitoredfor a media server.
Configuration > Standalone Drives Status
Accesses the global configuration for determining the status for monitoredstandalone drive instances.By default, the following NBUDriveState to NBUDriveStatus mapping rule isused:
116NBU_DEVICE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DEVICEIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDriveState Set by NBUDriveCollector. Displaysthe state of the standalone drive.This is determined from thestandalone drive controlinformation.
0 = Idle1 =Mounted2 = In Use3 =Pending4 = Down-1 =Unknown
None Availability
NBUDriveStatus Set by NBUDriveCollector. Monitorsthe status of the standalone drive.This status is determined by thestandalone drive status mappingrule defined in the KM command Configuration> Standalone Drive(s)Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger anevent and annotate the last datapoint.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDriveSummary Set by NBUDriveCollector.Summarizes the standalone driveinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
NBUDriveThroughput*
Set by NBUDriveCollector. Displaysthe throughput of the standalonedrive during the last backupactivity.
Megabytesper second(MB/s)
None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
117 NBU_DEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Name Name of the standalone drive.
Description Description of the drive.
Path Device path of the drive.
Type Media type used in the drive.
Device Host Name of the remote host where the drive is connected.
Serial Number Serial number of the drive.
Drive Index Unique index assigned to the drive.
Control Control mode for the drive.
User User ID of the person or application whose request is currently assigned to thisdrive.
Media ID Media identifier of the media mounted on this drive.
Request ID ID of the pending request, if this drive is assigned to a pending request .
Status Status of the drive as determined by the NBU KM.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
118NBU_DEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Administration > OnlineDrive
Allows the selected drive to be brought online.
Administration > OfflineDrive
Allows the selected drive to be brought offline.
Configuration > Standalone Drives
Accesses the dialog for specifying which standalone drives are to be monitoredby the NBU KM.By default, all local and remote standalone drives are monitored for a masterserver and all local standalone drives are monitored for a media server.
Configuration > Standalone Drives Status
Accesses the global configuration for determining the status for monitoredstandalone drive instances.By default, the following NBUDriveState to NBUDriveStatus mapping rule isused:
119 NBU_DEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DPOOLIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDPoolSummary Set by NBUStorageCollector.Summarizes the disk poolinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
NBUDPoolUpDownState Set by NBUStorageCollector.Displays the up/down state of thedisk pool.
0 = Down1 = Up-1 =Unknown
None Availability
NBUDPoolUpDownStatus
Set by NBUStorageCollector.Monitors the up/down status of thedisk pool. This status is determinedby the disk pool status mappingrule defined in the KM commandConfiguration>Disk Pool(s) Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger anevent and annotate the last datapoint.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDPoolVolumeCount*
Set by NBUStorageCollector.Displays the number of volumes inthe disk pool.
count None Statistics
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
120NBU_DPOOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Name Name of the disk pool.
Description Description of the disk pool.
Storage Server Name of the host where the disk pool is attached to.
Storage Server Type Type of the storage server.
Up/Down State Up/down status of the disk pool (1 – Up, 0 – Down).
Raw Size Raw disk size of the disk pool.
Usable Size Usable disk size of the disk pool.
High Watermark High watermark for the volumes in disk pool.
Low Watermark Low watermark for the volumes in disk pool.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
121 NBU_DPOOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Configuration > DiskPool
Accesses the configuration for monitoring the selected disk pool instance.This dialog allows the selected disk pool instance to be enabled or disabled formonitoring by the NBU KM.
Configuration > DiskPool Up/Down Status
Accesses the individual configuration for determining disk pool up/downstatus for the selected disk pool instance.By default, the global NBUDPoolUpDownState to NBUDPoolUpDownStatusmapping rule is used, as configured at the container level.
Configuration > DiskVolumes
Accesses the dialog for specifying which disk volumes of the selected disk poolare to be monitored by the NBU KM. By default, all disk volumes of the selecteddisk pool are monitored.
Configuration > DiskVolumes Up/Down Status
Accesses the configuration for determining up/down status for the monitoreddisk volume instances on the selected disk pool instance. By default, the global NBUDVolumeUpDownState to NBUDVolumeUpDownStatus mapping rule isused, as configured at the container level.
122NBU_DPOOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_DVOLUMEIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUDVolumeReadStreamCount*
Set by NBUStorageCollector. Displays thenumber of current read steams for thedisk volume
Count None Statistics
NBUDVolumeSpaceAvailable*
Set by NBUStorageCollector. Monitors theavailable disk volume space for thebackup data to use.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
Gigabytes(GB)
Warning:between 0and ≤ 1Alarm:between 1and 0
Availability
NBUDVolumeSpaceGrowthRate
Set by NBUStorageCollector. Displays thegrowth rate of the disk space used by thebackup data in this disk volume.
Gigabytesperseconds(GB/s)
None Statistics
NBUDVolumeSpaceUsed*
Set by NBUStorageCollector. Displays thedisk space occupied by the backup datain this disk volume.
Gigabytes(GB)
None Statistics
NBUDVolumeSpaceUsedPercent
Set by NBUStorageCollector. Monitors thepercentage of occupied disk spaceagainst the capacity of this disk volume.
If this parameter changes to warning oralarm state, the recovery action willtrigger an event.
Percentage(%)
Warning:95-98Alarm: 98-100
Statistics
NBUDVolumeSummary
Set by NBUStorageCollector. Summarizesthe disk volume information as reportedby commands executed by the datacollector.
n/a None n/a
NBUDVolumeUpDownState
Set by NBUStorageCollector. Displays theup/down state of the disk volume.
0 = Down1 = Up-1 =Unknown
None Availability
123 NBU_DVOLUME
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUDVolumeUpDownStatus
Set by NBUStorageCollector. Monitors theup/down status of the disk volume. Thisstatus is determined by the disk volumestatus mapping rule defined in the KMcommand Configuration>Disk Volume(s)Status.
If this status parameter changes towarning or alarm state, the recoveryaction will trigger an event and annotatethe last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUDVolumeWriteStreamCount*
Set by NBUStorageCollector. Displays thenumber of current write steams for thedisk volume
Count None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the disk volume.
Description Description of the disk volume.
Storage Server Name of the host where the disk volume is attached to.
Disk Pool Name Name of the disk pool the volume belongs to.
Disk Type Type of the disk.
Disk Media ID Media ID of the disk.
Up/Down State Up/down status of the disk volume (1 – Up, 0 – Down).
Total Capacity Total disk capacity of the disk volume.
Free Space Free disk space in the volume.
Used Percent Percentage of used disk space.
Number of ReadMounts
Number of read mounts of the disk volume.
Number of WriteMounts
Number of write mounts of the disk volume.
Collector Name Name of the data collector that sets variables and parameters under this applicationinstance.
Collector LastStart
Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
124NBU_DVOLUME
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Collector NextStart
Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Disk Volume
Sets the disk volume instance to be enabled or disabled for monitoring by the NBU KM.
Configuration >Disk Volume Up/Down Status
Accesses the individual configuration for determining disk volume up/down status forthe selected disk volume instance.By default, the global NBUDVolumeUpDownState to NBUDVolumeUpDownStatusmapping rule is used, as configured at the container level.
125 NBU_DVOLUME
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_JOB_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUJobActiveBackupCount*
Set by NBUJobCollector. Displaysthe number of active backup jobscurrently discovered andmonitored.
Count None Statistics
NBUJobActiveBackupReduction*
Set by NBUJobCollector. Displaysthe reduction in number of activebackup jobs since the lastcollection cycle.
Count None Statistics
NBUJobActiveCount* Set by NBUJobCollector. Displaysthe number of active jobs currentlydiscovered and monitored.
Count None Statistics
NBUJobActiveNonBackupCount*
Set by NBUJobCollector. Displaysthe number of active non-backupjobs currently discovered andmonitored.
Count None Statistics
NBUJobCollectorExecTime
This is a standard parameter whichmonitors the collector execution time. It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUJobCollectorWarn", 3600);
Seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUJobDetails Set by NBUJobCollector. Displaysall data returned to the standardout from commands executed by thedata collector.
n/a n/a n/a
NBUJobQueuedBackupCount*
Set by NBUJobCollector. Displaysthe number of backup jobs in"Queued" state.Units: count
Count None Statistics
126NBU_JOB_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUJobQueuedBackupReduction *
Set by NBUJobCollector. Displaysthe reduction in number of queuedbackup jobs since the lastcollection cycle.
Count None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Force Full Collection Allows the user to force the data collector for jobs to perform a full discoveryduring the next collection cycle.
Acknowledgement > Warnings
Allows acknowledgement of warning alerts occurring on any monitored jobinstance.This dialog allows acknowledgement of any job in a "suspicious" state (whichsets the parameter NBUJobStatus to Warning).
Acknowledgement > Alarms
Allows acknowledgement of alarms occurring on any monitored job instance.This dialog allows acknowledgement of any job in a "failure" state (which setsthe parameter NBUJobStatus to Alarm).
Acknowledgement > All Allows acknowledgement of all warnings and alarms occurring on anymonitored job instance.This dialog allows acknowledgement of any job in a "suspicious" or "failure"state (which sets the parameter NBUJobStatus to Warning or Alarm,respectively.
Configuration > Jobs Accesses the dialog for specifying which jobs are to be monitored by the NBUKM.By default, all scheduled jobs on the master server are monitored according tothe following conditions:
127 NBU_JOB_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
The age of a job is calculated from the job start time. The status of a job isdetermined by the state of the job (from the parameter NBUJobState) and the jobstatus mapping rule, described below.
Configuration > Jobs ExitStatus Filter
Accesses the configuration for erroneous and failure exit status codes for allbackup and restore jobs. This filter is used for setting the parameter NBUJobState to "6=Error" and 10=Failed respectively, when a backup or restorejob returns a non-zero exit status. The exit status codes are mapped toparameter NBUJobState as shown below:
The default filter includes [ALL] in the failure filter and exit status code "1" inthe erroneous filter. [ALL] is a keyword used for deciding the state for all otherexit status codes not listed in the filters.
Type [default] to reset the filters to shipped default configuration.
Configuration > JobsStatus
Accesses the configuration for determining the status for all monitored jobinstances.By default, the following NBUJobState to NBUJobStatus mapping rule is used:
Configuration > JobsAlert Acknowledgement
Accesses the global configuration of the method of acknowledgement for alertson monitored job instances.By default, the job alerts are manually acknowledged. Using this menu you canchange this so the job collector automatically acknowledges previous job alerts(warnings or alarms) when it detects new errors.
128NBU_JOB
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_JOBIcon
Parameters
Jobs Monitoring is disabled on media servers and in passive multi-node mode.
Name Description Units Default AlertConditions
Type
NBUJobDuration Set by NBUJobCollector. Displaysthe duration of the job from thestart.
Seconds None Statistics
NBUJobFileCount Set by NBUJobCollector. Displaysthe number of files backed up forthis job.
Count None Statistics
NBUJobSize Set by NBUJobCollector. Displaysthe amount of data backed up forthe job.
Megabytes(MB)
None Statistics
NBUJobState Set by NBUJobCollector. Displaysthe state of the job. This isdetermined using the jobcompletion state, job exit statuscode, last job operation, and theerroneous exit status filter.
The erroneous exit status filter canbe customized using the KM menu Configuration>Jobs Erroneous ExitStatus. If the exit status code isincluded in the erroneous exitstatus filter, it will be set to Errors.
0 =Completed1 = Queued2 =Mounting3 = InProgress4 = InProgress/Error5 =Requeued6 = Error7 = Aborted8 =Suspended9 =Incomplete10 = Failed-1 =Unknown
None Availability
129 NBU_JOB
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUJobStatus Set by NBUJobCollector. Monitorsthe status of the job. This status isdetermined by the job statusmapping rule defined in the KMcommand Configuration>JobsStatus.
If this status parameter changes towarning or alarm state, therecovery action will trigger anevent and annotate the last datapoint.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUJobSummary Set by NBUJobCollector.Summarizes the job information asreported by commands executed bythe data collector.
n/a n/a n/a
NBUJobText Set by NBUJobCollector. Displaysall reported messages related tothis job.
n/a n/a n/a
NBUJobThroughput* Set by NBUJobCollector. Displaysthe throughput of this job.
Megabytesperseconds(MB/s)
None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Job ID Identifier assigned to the job by Veritas NetBackup.
Type Type of the job.
Schedule Name of the schedule used by the job.
Schedule Type Type of the schedule used by the job.
Subtype Subtype of the schedule used by the job.
Status Status of the job as determined by the NBU KM.
Completion Status Completion status of the job.
Exit Status Exit status code of the job.
Policy Name Name of the policy used by the job.
Policy Type Type of the policy used by the job.
Client Host name of the policy client associated with the job.
130NBU_JOB
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Media Server Host name of the media server associated with the job.
Storage Unit Name of the storage unit that the job is using.
Schedule Start Schedule start time.
Schedule End Schedule end time.
Start Date & time when the job was initiated.
End Date & time when the job completed.
Duration Duration of the job.
Size Amount of data that has been written for the job.
Files Number of files that have been written for the job.
Percent Completed Estimated percentage of the job that has been completed in comparison withthe last similar successful job for the same policy, policy client, and schedule.
Time Remaining Remaining time of the job in comparison with the last similar successful job.
Attempt Number of attempts of the job.
Operation Last operation performed by the job.
Job PID Process ID of the job.
Priority Priority of the job.
Owner Owner of the job.
Last Backup Start Date & time when the last similar successful backup started.
Last Backup End Date & time when the last similar successful backup completed.
Last Backup Job ID Job ID of the last similar successful backup.
Last Backup Duration Duration of the last similar successful backup.
Last Backup Size Amount of data written by the last similar successful backup.
Last Backup Files Number of files written by the last similar successful backup.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Acknowledgement > Alert Sets the job instance is in a "suspicious" or "failure" state (which sets theparameter NBUJobStatus to Warning or Alarm, respectively).
131 NBU_JOB
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_LDEVICEIcon
Parameters
Name Description Units Default AlertConditions
Type
NBURDriveState Set by NBULibraryCollector.Displays the state of the roboticdrive. This is determined from therobotic drive control information.
0 = Idle1 =Mounted2 = In Use3 =Pending4 = Invalid5 = Down6 =Missing-1 =Unknown
None Availability
NBURDriveStatus Set by NBULibraryCollector.Monitors the status of the roboticdrive. This status is determined bythe robotic drive status mappingrule defined in the KM command Configuration>Robotic Drive(s)Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBURDriveSummary Set by NBULibraryCollector.Summarizes the robotic driveinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
NBURDriveThroughput*
Set by NBULibraryCollector.Displays the throughput of therobotic drive during the last backupactivity.
Megabytesperseconds(MB/s)
None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
132NBU_LDEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the robotic drive.
Description Description of the drive.
Path Device path of the drive.
Type Media type used in the drive.
Device Host Name of the remote host where the drive is connected.
Serial Number Serial number of the drive.
Drive Index Unique index assigned to the drive.
Robot Number Unique number assigned to the robotic library where the drive is located.
Robot Type Type of the robotic library where the drive is located.
Robot Drive Number Unique number assigned to the robotic drive within the robotic library.
Control Control mode for the drive.
User User ID of the person or application whose request is currently assigned to thisdrive.
Media ID Media identifier of the media mounted on this drive.
Request ID ID of the pending request, if this drive is assigned to a pending request .
Status Status of the drive as determined by the NBU KM.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
133 NBU_LDEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Administration > OnlineDrive
Allows the selected robotic drive to be brought online.
Administration > OfflineDrive
Allows the selected robotic drive to be taken offline.
Configuration > RoboticDrive
Sets the drive instance to be enabled or disabled for monitoring by the NBU KM.
Configuration > RoboticDrive Status
Accesses the individual configuration for determining the drive status for theselected robotic drive instance.By default, the NBURDriveState to NBURDriveStatus mapping rule configured atthe parent level is used. (Note that if the mapping rule has not been modifiedfor the parent robotic library, then the default is the global mapping ruleconfigured at the container level.)
134NBU_LDEVICE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_LIBRARY_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBULibraryCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBULibraryCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBULibraryDetails Set by NBULibraryCollector.Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
135 NBU_LIBRARY_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
Reports > Drive CleaningStatistics
Reports the drive cleaning statistics on the current master/media server.
Configuration > RoboticLibraries
Accesses the dialog for specifying which robotic libraries are to be monitoredby the NBU KM.By default, all local and remote robotic libraries are monitored for a masterserver and all local robotic libraries are monitored for a media server.
Configuration > RoboticLibraries Status
Accesses the global configuration for determining the status for monitoredrobotic library instances.By default, the following NBULibraryState to NBULibraryStatus mapping rule isused:
Configuration > RoboticDrives
Accesses the dialog for specifying which drives of the selected robotic libraryare to be monitored by the NBU KM. By default, all robotic drives of the selectedrobotic library are monitored.
Configuration > RoboticDrives Status
Accesses the global configuration for determining the status for monitoredrobotic drive instances (configured under monitored robotic library instances).By default, the following NBURDriveState to NBURDriveStatus mapping rule isused:
136NBU_LIBRARY_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_LIBRARYIcon
Parameters
Name Description Units Default AlertConditions
Type
NBULibraryMediaAssignedCount
Set by NBULibraryCollector.Displays the number of assignedmedia loaded in this roboticlibrary. (Assigned media are tapemedia assigned to a non-scratchvolume pool.)
count None Statistics
NBULibraryMediaAvailableCount
Set by NBULibraryCollector.Displays the number of mediaavailable to use in this roboticlibrary. This includes unassignedand scratch media.
count None Statistics
NBULibraryMediaAvailablePercent*
Set by NBULibraryCollector.Monitors the percentage ofavailable media against the totalnumber of media loaded in thisrobotic library.
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
Warning:between 2and 5Alarm: 2 orless
Statistics
NBULibraryMediaCleaningLeft
Set by NBULibraryCollector.Monitors the number of cleaningleft on the cleaning media availablein this robotic library.
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
count Warning: 2or lessAlarm: 0
Statistics
NBULibraryMediaCount
Set by NBULibraryCollector.Displays the total number of medialoaded in this robotic library.
count None Statistics
137 NBU_LIBRARY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBULibraryMediaScratchCount
Set by NBULibraryCollector.Displays the number of scratchmedia loaded in this roboticlibrary. (Scratch media are tapemedia assigned to the scratchvolume pool.)
count None Statistics
NBULibraryMediaScratchPercent*
Set by NBULibraryCollector.Monitors the percentage of scratchmedia against the total number ofmedia loaded in this roboticlibrary.If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
None Statistics
NBULibraryMediaUnassignedCount
Set by NBULibraryCollector.Displays the number of unassignedmedia loaded in this roboticlibrary.(Unassigned media are tape medianot assigned to a volume pool.)
count None Statistics
NBULibraryMediaUnassignedPercent*
Set by NBULibraryCollector.Monitors the percentage ofunassigned media against the totalnumber of media loaded in thisrobotic library.
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
None Statistics
NBULibraryState Set by NBULibraryCollector.Displays whether the inquiry for therobotic library is valid or invalid. Itwill not perform any remote roboticlibrary test command on the mediaserver.
0 = Online1 = Remote2 = Offline3 = Invalid-1 =Unknown
None Availability
NBULibraryStatus Set by NBULibraryCollector.Monitors the status of the roboticlibrary. This status is determinedby the robotic library statusmapping rule defined in the KMcommand Configuration> RoboticLibrary (Libraries) Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
138NBU_LIBRARY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBULibrarySummary Set by NBULibraryCollector.Summarizes the robotic libraryinformation as reported bycommands executed by the datacollector.
n/a None n/a
NBULibraryThroughput*
Set by NBULibraryCollector.Displays the total throughput ofeach robotic library drive duringthe last backup activities within thelast hour.
Megabytesper second(MB/s)
None Statistics
NBULibraryUpDriveCount
Set by NBULibraryCollector.Displays the number up / onlinestate drives in this robotic library.
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
count None Statistics
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the robotic library.
Description Description of the robotic library.
Path Path of the robotic library.
Robot Number Unique number assigned to the robotic library.
Type Media type of the robotic library.
Device Host Name of the remote host where the robotic library is connected.
Robot Control Host Name of the host that provides the robotic control for a robot.
Serial Number Serial number of the robotic library.
Status Status of the robotic library.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
139 NBU_LIBRARY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Reports > RoboticLibrary Contents
Reports the contents of the selected robotic library.
Configuration > RoboticLibrary
Sets the robotic library instance to be enabled or disabled for monitoring by theNBU KM.
Configuration > RoboticLibrary Status
Accesses the individual configuration for determining the status for theselected robotic library instance. By default, the global NBULibraryState toNBULibraryStatus mapping rule is used, as configured at the container level.
Configuration > RoboticDrives
Accesses the dialog for specifying which drives of the selected robotic libraryare to be monitored by the NBU KM. By default, all robotic drives of the selectedrobotic library are monitored.
Configuration > RoboticDrives Status
Accesses the configuration for determining status for the monitored driveinstances on the selected robotic library instance. By default, the global NBURDriveState to NBURDriveStatus mapping rule is used, as configured at thecontainer level.
140NBU_LIBRARY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_LOG_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBULogCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBULogCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBULogDetails Set by NBUDatabaseCollector.Summarizes the databaseinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
141 NBU_LOG_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
Reports > Messages List Reports all Veritas NetBackup messages logged in the past 24 hours.
Configuration > Logs Accesses the dialog for specifying which log files are to be monitored by theNBU KM.By default, the following log files are monitored. These log file paths arerelative to the Veritas NetBackup installation directory (for example /usr/openvon HP-UX), unless the path is fully qualified as for the system log on Solaris andHP-UX.
Configuration > LogsFilter
Accesses the global configuration of the filter for expressions used for detectingerror messages in the monitored log file instances.By default, the following "Included" expressions are looked for in each log file.If detected, the message containing the expression is added to the appropriatetext parameter, unless the message also contains an "Excluded" expression forthe same filter.
Configuration > LogsScan Limit
Accesses the global configuration of the data scanning limit for monitored logfile instances.By default, the log collector scans 500 KBytes of new log data for eachmonitored log file during each data collection cycle.
Configuration > LogsAlert Acknowledgement
Accesses the global configuration of the method of acknowledgement for alertson monitored log file instances.By default, the log collector automatically acknowledges previous log alerts(warnings or alarms) when it detects new errors.
142NBU_LOG
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_LOGIcon
Parameters
Name Description Units Default AlertConditions
Type
NBULogAlarmCount* Set by NBULogCollector. Monitorsthe number of alarm messages setin the parameter NBULogAlarmText.
If this parameter changes to alarmstate, the recovery action willtrigger an event.
count Alarm: morethan orequal 1
Statistics
NBULogAlarmText Set by NBULogCollector. Displaysall alarm messages in the log filewhich have not been acknowledged.The filter used by the data collectorto determine alarm messages canbe customized using the KMcommand Configuration>Log(s)Filter.
These alarm messages can beacknowledged automatically(default) or manually, depending onthe configuration in the KMcommand Configuration > Log(s)Alert Acknowledgement. Manualacknowledgement is availableunder the KM sub-menuAcknowledgement.
n/a None n/a
NBULogFSSpaceUsedPercent*
Set by NBULogCollector. Monitorsthe percentage of space used by thefile system (where the log fileresides).
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
Warning:between 95and 98Alarm : 98 and over
Statistics
143 NBU_LOG
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBULogSpaceAvailable Set by NBULogCollector. Monitorsthe available space for the log fileto use (this is also the availablespace on the file system).If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Megabytes(MB)
Warning:between 2and 5Alarm: 2 orless
Availability
NBULogSpaceGrowthRate
Set by NBULogCollector. Displaysthe growth rate of the amount ofspace used by the log file.
Kilobytesper second(KB/s)
None Statistics
NBULogSpaceUsed Set by NBULogCollector. Displaysthe amount of space used by the logfile.
Kilobytes(KB)
None Statistics
NBULogSpaceUsedPercent*
Set by NBULogCollector. Monitorsthe percentage of capacity used bythe log file. The total capacity is theused space (NBULogSpaceUsed)plus available space(NBULogSpaceAvailable). If thisparameter changes to warning oralarm state, the recovery actionwill trigger an event.
Percentage(%)
Warning:between 95and 98Alarm: 98and over
Statistics
NBULogSummary Set by NBULogCollector.Summarizes the log file informationas reported by commands executedby the data collector.
n/a None n/a
NBULogText Set by NBULogCollector. Displaysall log text scanned by the datacollector during the last collectioncycle. The size of the data scannedby the data collector is configuredin the KM command Configuration>Log(s) Scan Limit.
n/a None n/a
NBULogWarningCount* Set by NBULogCollector. Monitorsthe number warning messages setin the parameter NBULogWarningText.
If this parameter changes to awarning state, the recovery actionwill trigger an event.
count Warning:more thanor equal to1
Statistics
144NBU_LOG
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBULogWarningText Set by NBULogCollector. Displaysall warning messages in the log filewhich have not been acknowledged.The filter used by the data collectorto determine warning messages canbe customized using the KMcommand Configuration>Log(s)Filter.
These warning messages can beacknowledged automatically(default) or manually, depending onthe configuration set through theKM command Configuration>Log(s)Alert Acknowledgement. Manualacknowledgement is availableunder the KM sub-menuAcknowledgement.
n/a None n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the Veritas NetBackup log file.
Description Description of the Veritas NetBackup log file.
Path Full file path of the log file.
Log File ModificationTime
Date & time when the log file was last modified.
Log File Size File size of the log file.
Total FS Space Total space used by the file system.
Available FS Space Space available for use by the file system.
FS Percent Used Percentage of the total file system space used.
Last Purge Date & time when the log file was last purged.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
145 NBU_LOG
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Acknowledgement > Warnings
Allows acknowledgement of warning messages detected on the selected log fileinstance.This dialog allows selective acknowledgement of "suspicious" error messagesdetected in the log file and sent to the text parameter NBULogWarningText.
Acknowledgement > Alarms
Allows acknowledgement of alarm messages detected on the selected log fileinstance.This dialog allows selective acknowledgement of "failure" error messagesdetected in the log file and sent to the text parameter NBULogAlarmText.
Acknowledgement >All Allows acknowledgement of all alarm and warning messages detected on theselected log file instance.This dialog allows acknowledgement of all error messages detected in the logfile and sent to the text parameter NBULogWarningText or NBULogAlarmText.
Configuration > Log Accesses the individual configuration for monitoring the selected log fileinstance.This dialog allows the selected log file instance to enabled or disabled formonitoring by the NBU KM.
Configuration > LogFilter
Accesses the individual configuration of the log error filter for the selected logfile instance.By default, the global log filter is used, as configured at the container level.
Configuration > Log ScanLimit
Accesses the individual configuration of the data scanning limit for the selectedlog file instance.By default, the global log file scanning limit is used, as configured at thecontainer level.
Configuration > Log AlertAcknowledgement
Accesses the individual configuration of the method of acknowledgement foralerts on the selected log file instance.By default, the global method of log error acknowledgement is used, asconfigured at the container level.
146NBU_LOG
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_MAINIcon
Parameters
No parameters.
InfoBox
No parameters.
Menu Commands
Function Description
Configuration > NetBackup Nodes
Allows to monitor several NetBackup master and media servers, and NetBackupappliances with one PATROL agent
Configuration > Preloading
Accesses the Preloading Configuration dialog, which adds or removes the KMfrom PATROL Agent variable "/AgentSetup/preloadedKMs". By preloading theNBU KM, the PATROL Agent will monitor the Veritas NetBackup applicationwithout any PATROL Console connection.
Configuration > ForceClassic ConfigurationMode
Forces the KM to "Classic Mode" and allows to configure NetBackup KM fromPATROL Consoles.
Configuration > About Shows the version and general information about PRODUCT SHORT NAME%>
147 NBU_MAIN
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_MEDIASERVER_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUMediaServerCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUMediaServerCollectorWarn",3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUMediaServerDetails Set by NBUMediaServerCollector.Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > MediaServers
Accesses the dialog for specifying which media servers are to be monitored bythe NetBackup KM. By default, all media servers are monitored.
148NBU_MEDIASERVER_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Configuration > MediaServers Status
Accesses the configuration for determining the status for all monitoredinstances.By default, the following NBUMediaServerState to NBUMediaServerStatusmapping rule is used:
149 NBU_MEDIASERVER_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_MEDIASERVERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUMediaServerState Set by NBUMediaServerCollector.Displays the state of the mediaserver as reported in the commandexecuted by the data collector.
4 = NotReachableBy Master;8 = NotActive ForTape OrDisk Jobs ; 12 = ActiveFor DiskJobs; 13 =AdministrativePause ; 14 = ActiveFor TapeAnd DiskJobs ; -1 =Unknown
None Availability
NBUMediaServerStatus Set by NBUMediaServerCollector.Monitors the status of the mediaserver. This status is determined bythe media server mapping ruledefined through the KM command Configuration > Media Server(s)Status. If this status parameterchanges to warning or alarm state,the recovery action will trigger anevent and annotate the last datapoint.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUMediaServerSummary
This text parameter displays thesummary of processed datacollected from the command.
n/a n/a n/a
InfoBox
150NBU_MEDIASERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Name Name of the media server.
Type Type of server. Possible values are Master or Media.
Status Status of the media server.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > MediaServer
Accesses the dialog for specifying which media servers are to be monitored bythe NetBackup KM. By default, all media servers are monitored.
Configuration > MediaServers Status
Accesses the configuration for determining the status for all monitoredinstances. By default, the following NBUMediaServerState toNBUMediaServerStatus mapping rule is used:
151 NBU_MEDIASERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_MOUNT_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBURequestCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBURequestCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBURequestDetails Set by NBURequestCollector.Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
152NBU_MOUNT_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
Administration > AssignAll
Assigns all instantiated mount requests to their requested drives.
Administration > DenyAll
Denies all instantiated mount requests.
Administration > Resubmit All
Resubmits all instantiated mount requests.
Reports > PendingRequests
Reports a list of all pending mount requests.All report KM commands require a user account, which will be used forexecuting the menu command. Note the command will fail if the user does nothave privileges to execute the appropriate Veritas NetBackup command.
Configuration > MountRequests
Accesses the dialog for specifying which mount requests are to be monitored bythe NBU KM.By default, all mount requests are monitored for 1 day from the time they areissued.
Configuration > MountRequests Status
Accesses the configuration for determining the status for all monitored mountrequest instances.By default, the following NBURequestState to NBURequestStatus mapping ruleis used:
Configuration > MountRequest Date/TimeFormat
Accesses the configuration of the date/time format and time zone for allinstantiated mount requests.By default, the format used by Veritas NetBackup for the date/time of a mountrequest is set to "MO/DD/YY HH:MM:SS". The date/time is then converted by theNBU KM using the system time zone on the PATROL Agent (system time zone isindicated by an empty field).
153 NBU_MOUNT_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_MOUNTIcon
Parameters
Mount Requests Monitoring is disabled on media servers and in passive multi-node mode.
Name Description Units Default AlertConditions
Type
NBURequestElapsed* Set by NBURequestCollector.Displays the elapsed time since themount request was issued.
minutes None Statistics
NBURequestState Set by NBURequestCollector.Displays the state of the mountrequest as reported in thecommand executed by the datacollector.
0 =Completed1 =Pending-1 =Unknown
None Availability
NBURequestStatus Set by NBURequestCollector,monitors the status of the mountrequest. This status is determinedby the mount request statusmapping rule defined in the KMcommand Configuration>MountRequest(s) Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBURequestSummary Set by NBURequestCollector.Summarizes the pending requestinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
154NBU_MOUNT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Request ID Full name assigned for the pending request.
Description Description of the pending request.
Job ID ID of the job the pending request belongs to.
Job Type Type of the job the pending request belongs to (Backup or Restore).
Policy Name Name of the policy the pending request belongs to.
Client Name of the policy client the pending request belongs to.
Recorded Media ID Requested media identifier as recorded in the media label.
External Media ID Requested media identifier as recorded on the media cartridge or canister.
Density Density of the requested media.
Mode Mode of the pending request (Write or Read).
Barcode Barcode of the requested media.
Volume Group Volume group of the requested media.
Media Server Host name of the media server that issued the pending request.
Storage Unit Name of the storage unit that the media should be mounted on.
User User ID of the person or application the pending request belongs to.
Request Time Date & time when the pending request was issued. This is interpreted using thePending Request Date/Time Format defined in the KM menu command.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Administration > Assign Assigns the selected pending request to its requested drive.
Administration > Deny Denies the selected pending request.
Administration > Resubmit
Resubmits the selected pending request.
155 NBU_MOUNT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_PCLIENTIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUFileExcludeList Set by NBUPolicyCollector. Lists allfiles and file systems excluded frombackup for this policy client.
n/a n/a n/a
NBUFileIncludeList Set by NBUPolicyCollector. Lists allfiles and file systems included forbackup for this policy client.
n/a n/a n/a
NBUPClientBackupSummary
Set by NBUPolicyCollector.Summarizes the last backup for thispolicy client.
n/a n/a n/a
NBUPClientBackupThroughput*
Set by NBUPolicyCollector. Displaysthe throughput of the last backupfor this policy client.
Megabytesper second(MB/s)
None Statistics
NBUPClientFullBackupDuration
Set by NBUPolicyCollector. Displaysthe duration of the last successfulfull backup for this policy client.
seconds None Statistics
NBUPClientFullBackupFileCount
Set by NBUPolicyCollector. Displaysthe number of files backed up in thelast successful full backup for thispolicy client.
count None Statistics
NBUPClientFullBackupSize*
Set by NBUPolicyCollector. Displaysthe size of the last successful fullbackup for this policy client.
Megabytes(MB)
None Statistics
NBUPClientIncrBackupDuration
Set by NBUPolicyCollector. Displaysthe duration of the last successfulincremental backup for this policyclient.
seconds None Statistics
NBUPClientIncrBackupFileCount
Set by NBUPolicyCollector. Displaysthe number of files backed up in thelast successful incremental backupfor this policy client.
count None Statistics
156NBU_PCLIENT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUPClientIncrBackupSize*
Set by NBUPolicyCollector. Displaysthe size of the last successfulincremental backup for this policyclient.
Megabytes(MB)
None Statistics
NBUPClientSummary Set by NBUPolicyCollector.Summarizes the policy clientinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Host name of the Veritas NetBackup policy client.
Description Description of the Veritas NetBackup policy client.
Policy Name Name of the policy that the policy client belongs to.
Hardware Hardware platform of the policy client.
Operating System Operating system of the policy client.
Priority Priority of the policy client.
Last Backup Start Date & time when the last backup started for the policy client.
Last Backup End Date & time when the last backup completed for the policy client.
Last Backup Status Status of the last backup for the policy client.
Last Backup Job ID Job ID of the last backup for the policy client.
Last Full Backup Start Date & time when the last successful full backup started for the policy client.
Last Full Backup End Date & time when the last successful full backup completed for the policyclient.
Last Full Backup Job ID Job ID of the last successful full backup of the policy client.
Last Incr Backup Start Date & time when the last successful incremental backup started for the policyclient.
Last Incr Backup End Date & time when the last successful incremental backup completed for thepolicy client.
Last Incr Backup Job ID Job ID of the last successful incremental backup of the policy client.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
157 NBU_PCLIENT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > PolicyClient
Sets the policy client instance to be enabled or disabled for monitoring by theNBU KM.
158NBU_PCLIENT
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_POLICY_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUPolicyCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUPolicyCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUPolicyDetails Set by NBUPolicyCollector. Displaysall data returned to the standardout from commands executed by thedata collector.
n/a n/a n/a
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
159 NBU_POLICY_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
Configuration > Policies Sets which policies are to be monitored by the NBU KM. By default, all policiesconfigured on the master server are monitored.
Configuration > PoliciesBackup Restriction
Accesses the global configuration to set a backup restriction window for allmonitored policy instances. By default, backup restriction is disabled.When the backup restriction window is defined and enabled using this dialog,and if the policy status mapping rule is configured appropriately, an alert willbe triggered if any backup activity is detected during this restriction window.
Configuration > PoliciesStatus
Accesses the global configuration for determining the policy status formonitored policy instances.By default, the following NBUPolicyState to NBUPolicyStatus mapping rule isused:
Configuration > PolicyClients
Accesses the dialog for specifying which policy clients of the selected policy are to bemonitored by the NBU KM.By default, all policy clients of enabled policies are monitored. Type "[default]" to reset tothe default configuration.
160NBU_POLICY_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_POLICYIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUPolicyBackupElapsed*
Set by NBUPolicyCollector. Displaysthe elapsed time since the lastbackup for this policy, regardlessof completion status of the backup.This last backup is determined fromthe monitored jobs as configured inthe KM command Configuration>Jobs from the Jobsicon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, therecovery action will trigger anevent.
hours None Statistics
NBUPolicyBackupSummary
Set by NBUPolicyCollector.Summarizes the last backup for thispolicy.
n/a n/a n/a
NBUPolicyBackupThroughput*
Set by NBUPolicyCollector. Displaysthe throughput of the last backupfor this policy.
Gigabytesper second(GB/s)
None Statistics
NBUPolicyFullBackupDuration
Set by NBUPolicyCollector. Displaysthe duration of the last successfulfull backup for this policy.
seconds None Statistics
NBUPolicyFullBackupElapsed*
Set by NBUPolicyCollector. Displaysthe elapsed time since the lastsuccessful full backup for thispolicy. This last backup isdetermined from the monitoredjobs as configured in the KMcommand Configuration>Jobs fromthe Jobs icon.
hours None Statistics
161 NBU_POLICY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, therecovery action will trigger anevent.
NBUPolicyFullBackupFileCount
Set by NBUPolicyCollector. Displaysthe number of files backed up in thelast successful full backup for thispolicy.
count None Statistics
NBUPolicyFullBackupSize
Set by NBUPolicyCollector. Displaysthe size of the last successful fullbackup for this policy.
Gigabytes(GB)
None Statistics
NBUPolicyIncrBackupDuration
Set by NBUPolicyCollector. Displaysthe duration of the last successfulincremental backup for this policy.
seconds None Statistics
NBUPolicyIncrBackupElapsed*
Set by NBUPolicyCollector. Displaysthe elapsed time since the lastsuccessful incremental backup forthis policy. This last backup isdetermined from the monitoredjobs as configured in the KMcommand Configuration>Jobs fromthe Jobs icon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, therecovery action will trigger anevent.
hours None Statistics
NBUPolicyIncrBackupFileCount
Set by NBUPolicyCollector. Displaysthe number of files backed up in thelast successful incremental backupfor this policy.
count None Statistics
NBUPolicyIncrBackupSize
Set by NBUPolicyCollector. Displaysthe size of the last successfulincremental backup for this policy.
Gigabytes(GB)
None Statistics
NBUPolicyState Set by NBUPolicyCollector. Displaysthe state of the policy.
If a backup restriction window isdefined in the KM command Configuration> Policy (Policies)Backup Restriction, this parameterwill be set to Running in RestrictedWindow if there is any activityduring the specified period.
0 = Idle1 =Running2 =Running inRestrictedWindow3 = NotStarted
None Availability
162NBU_POLICY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
4 =Inactive-1 =Unknown
NBUPolicyStatus Set by NBUPolicyCollector.Monitors the status of the policy.This status is determined by thepolicy status mapping rule definedin the KM command Configuration>Policy (Policies) Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
NBUPolicySuccBackupElapsed*
Set by NBUPolicyCollector. Displaysthe elapsed time since the lastsuccessful backup for this policy.This last backup is determined fromthe monitored jobs as configured inthe KM command Configuration>Jobs from the Jobsicon.
The specified alarm ranges can beenabled to allow the output of theparameter to be actively monitored.Then, if this parameter changes towarning or alarm state, therecovery action will trigger anevent.
hours None Statistics
NBUPolicySummary Set by NBUPolicyCollector.Summarizes the policy informationas reported by commands executedby the data collector.
n/a None n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Name Name of the Veritas NetBackup policy.
Description Description of the Veritas NetBackup policy.
Type Type of the policy.
Active Status of the policy (yes or no).
163 NBU_POLICY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Priority Priority of the policy.
Keyword Keyword phrase used by the policy to associate all its backups.
Max Jobs/Policy Maximum number of concurrent jobs allowed for the policy.
Multiple Data Stream Whether the multiple data streaming is allowed for this policy (yes or no).
Residence Label of the storage unit used by the policy.
Status Current execution status of the policy (Idle, Running, or Running in RestrictedWindow).
Volume Pool Volume pool of the policy.
Last Backup Start Date & time when the last backup started for the policy.
Last Backup End Date & time at the completion of the last backup for the policy.
Last Backup Status Status of the last backup for the policy.
Last Backup Job ID Job ID of the last backup for the policy.
Last Full Backup Start Date & time when the last successful full backup started for the policy.
Last Full Backup End Date & time at the completion of the last successful full backup for the policy.
Last Full Backup Job ID Job ID of the last successful full backup for the policy.
Last Incr Backup Start Date & time when the last successful incremental backup started for the policy.
Last Incr Backup End Date & time at the completion of the last successful incremental backup for thepolicy.
Last Incr Backup Job ID Job ID of the last successful incremental backup for the policy.
Next Backup Date & time of the next scheduled backup.
Next Backup ScheduleName
Name of the next backup schedule.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time at the completion of the last data collection cycle.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > PolicySchedule
Displays the schedule of the selected policy instance.
Configuration > Policy Accesses the individual configuration for monitoring the selected policyinstance.
164NBU_POLICY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
This dialog allows the selected policy instance to be enabled or disabled formonitoring by the NBU KM.
Configuration > PolicyBackup Restriction
Accesses the individual configuration for the backup restriction window for theselected policy instance.By default, the global backup restriction rule is used, as configured at thecontainer level.
Configuration > PolicyStatus
Accesses the individual configuration for determining policy status for theselected policy instance.By default, the global NBUPolicyState to NBUPolicyStatus mapping rule is used,as configured at the container level. Select [default] to revert to the policy statusmapping rule configured at the global/container level.
Configuration > PolicyClients
Accesses the dialog for specifying which policy clients of the selected policy areto be monitored by the NBU KM.By default, all policy clients of enabled policies are monitored. Type "[default]"to reset to the default configuration.
165 NBU_POLICY
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_POOL_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUPoolCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUPoolCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUPoolDetails Set by NBUPoolCollector. Displaysall data returned to the standardout from commands executed bythe data collector.
n/a n/a n/a
166NBU_POOL_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > AvailableMedia
Reports all available media across all volume pools.
Configuration > VolumePools
Sets which volume pools are to be monitored by the NBU KM. By default, allvolume pools configured on the master/media server are monitored, except for"None" (the default pool shipped with the Veritas NetBackup application).
167 NBU_POOL_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_POOLIcon
Parameters
Pool monitoring is disable on media servers and in passive multi-node mode
Name Description Units Default AlertConditions
Type
NBUMediaActiveCount
Set by NBUPoolCollector. Displaysthe number of active media in thisvolume pool. Active media areavailable tape media with a statusof Active, where data has beenwritten but the media is not yet full.
count None Statistics
NBUMediaActivePercent*
Set by NBUPoolCollector. Monitorsthe percentage of active mediaagainst the total number of mediain this volume pool.If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
Warning: 2-5Alarm: 0-2
Statistics
NBUMediaCount Set by NBUPoolCollector. Displaysthe total number of media in thisvolume pool.
count None Statistics
NBUMediaFrozenCount
Set by NBUPoolCollector. Displaysthe number of frozen media in thisvolume pool. Frozen is a possiblestatus for a tape media.
count None Statistics
NBUMediaFullCount Set by NBUPoolCollector. Displaysthe number of full media in thisvolume pool. Full is a possiblestatus for a tape media.
count None Statistics
NBUMediaFullPercent*
Set by NBUPoolCollector. Monitorsthe percentage of full media againstthe total number of media in thisvolume pool.
Percentage(%)
Warning:95-98Alarm: 98-100
Statistics
168NBU_POOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
NBUMediaLoadedCount
Set by NBUPoolCollector. Displaysthe number of media in this volumepool, currently loaded to a roboticlibrary.
count None Statistics
NBUMediaLoadedEmptyCount
Set by NBUPoolCollector. Displaysthe number of empty media in thisvolume pool, currently loaded to arobotic library.
count None Statistics
NBUMediaLoadedEmptyPercent
Set by NBUPoolCollector. Monitorsthe percentage of empty mediaagainst the total number of emptymedia in this volume pool.
Percentage(%)
Warning:2-5Alarm:0-2
Statistics
NBUMediaReadOnlyCount
Set by NBUPoolCollector. Displaysthe number of media in this volumepool, currently read-only. A mediaturns read-only when it hasreached the maximum allowedmounts.
count None Statistics
NBUMediaScratchCount
Set by NBUPoolCollector. Displaysthe number of scratch media in thisvolume pool. The parameter isvisible and set only for scratchvolume pools.
count Warning: 0-2Alarm = 0
Statistics
NBUMediaSuspendedCount
Set by NBUPoolCollector. Displaysthe number of suspended media inthis volume pool. Suspended is apossible status for a tape media.
count None Statistics
NBUMediaUnassignedCount
Set by NBUPoolCollector. Displaysthe number of media in unassignedstate in this volume pool.
count None Statistics
NBUMediaUnassignedPercent*
Set by NBUPoolCollector. Monitorsthe percentage of unassigned mediaagainst the total number of mediain this volume pool.If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
None Statistics
NBUMediaUnknownCount
Set by NBUPoolCollector. Displaysthe number of media in unknownstate in this volume pool.
count None Statistics
169 NBU_POOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUPoolSpaceAvailable*
Set by NBUPoolCollector. Monitorsthe available media space for thebackup data to use amongst theassigned media in this volumepool.
If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Gigabytes(GB)
None Availability
NBUPoolSpaceGrowthRate
Set by NBUPoolCollector. Displaysthe growth rate of the total mediaspace used by the backup data inthis volume pool.
Gigabytesper second(GB/s)
None Statistics
NBUPoolSpaceUsed* Set by NBUPoolCollector. Displaysthe total media space occupied bythe backup data in this volumepool.
Gigabytes(GB)
None Statistics
NBUPoolSpaceUsedPercent*
Set by NBUPoolCollector. Monitorsthe percentage of total occupiedmedia space against the totalmedia capacity of this volume pool(not including any scratch media).If this parameter changes towarning or alarm state, therecovery action will trigger anevent.
Percentage(%)
Warning:95-98Alarm: 98-100
Statistics
NBUPoolSummary Set by NBUPoolCollector.Summarizes the volume poolinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
170NBU_POOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Name Description
Name Name of the volume pool.
Description Description of the pool.
Host Name Name of the host that will be permitted to request and use volumes in this pool.
User User ID of the person or application who is permitted to use volumes in thispool.
Group Name of the operating system user group allowed to use volumes in this pool.
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Reports > Media List Reports all volumes in the volume pool.
Configuration > VolumePool
Sets the volume pool instance to be enabled or disabled for monitoring by theNBU KM.
171 NBU_POOL
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_SERVERIcon
Parameters
Name Description Units Default AlertConditions
Type
ExtraFilesList Pushes the NetBackup KM libraryfiles to the PATROL Agent during the"Commit" operation.
n/a None n/a
NBUClientCollector Collects Veritas NetBackup clientrelated information. It sets allconsumer parameters in the NBU_CLIENT_CONTAINER andNBU_CLIENT application classes. Bydefault, this collector is executedonly on the master server.
Poll Time: 600 seconds
n/a None n/a
NBUCreateDistribution Is automatically activated at theend of NetBackup KM debugging ifthe customer chooses to "preparedebug files for sending to SentrySoftware". It is deactivated oncompletion.
Poll Time: 300 seconds
n/a None n/a
NBUDaemonCollector Collects Veritas NetBackup daemonrelated information. It sets allconsumer parameters in the NBU_DAEMON_CONTAINER andNBU_DAEMON application classes.
Poll Time: 300 seconds
n/a None n/a
172NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUDatabaseCollector Collects Veritas NetBackup catalogdatabase related information. Itsets all consumer parameters inthe NBU_DATABASE_CONTAINERand NBU_DATABASE applicationclasses. By default, this collector isexecuted only on the master server.
Poll Time: 1800 seconds
n/a None n/a
NBUDriveCollector Collects Veritas NetBackupstandalone drive relatedinformation. It sets all consumerparameters in the NBU_DEVICE_CONTAINER andNBU_DEVICE application classes.
Poll Time: 600 seconds
n/a None n/a
NBUJobCollector Collects Veritas NetBackup backup/restore activity related information.It sets all consumer parameters inthe NBU_JOB_CONTAINER andNBU_JOB application classes. Bydefault, this collector is executedonly on the master server.
Poll Time: 300 seconds
n/a None n/a
NBULibraryCollector Collects Veritas NetBackup roboticlibrary and robotic drive relatedinformation. It sets all consumerparameters in the NBU_LIBRARY_CONTAINER,NBU_LIBRARY, and NBU_LDEVICEapplication classes.
Poll Time: 600 seconds
n/a None n/a
NBULogCollector Collects Veritas NetBackup log filerelated information. It sets allconsumer parameters in the NBU_LOG_CONTAINER andNBU_LOG application classes.
Poll Time: 1800 seconds
n/a None n/a
173 NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBULoginStatus* Monitors the status of theNetBackup KM login details(username/password) for theoperating system. It is set by the NBU_SERVER application classdiscovery. If no valid username/password is detected for theoperating system, this parameterwill be set to Failure state. If thereare any suspicious commands, thisparameter will be set to Suspiciousstate.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
CollectionStatus
NBUMediaServerCollector
Collects information about mediaservers. It sets all consumerparameters for all possible mediaservers in the NBU_MEDIASERVER_CONTAINER andNBU_MEDIASERVER applicationclasses, including master serversas instances of NBU_MEDIASERVER.By default, this collector isexecuted only on the master server.
Poll Time: 300 seconds
n/a None n/a
NBUMonitoringMode* Monitors failover mode of theNetBackup KM. It is set by the NBU_SERVER application classdiscovery.By default NetBackup KM runs inPermanent Single-node Mode butmulti-node monitoring can beconfigured. For more details referto Configuring Multi-NodeMonitoring Mode.
0 =PermanentSingle-node Mode1 =TemporarySingle-nodeMode 2 = ActiveMulti-nodeMode3 = PassiveMulti-nodeMode-1 =Unknown
None CollectionStatus
NBUNodeStatus* Monitors error messages for theVeritas NetBackup application onthis managed system. It is set bythe NBU_SERVER application classdiscovery.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
174NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
If the node is unreachable or if anyof the Veritas NetBackupapplication daemons is notrunning, this parameter will be setto Failure state. The list of criticalVeritas NetBackup daemons can becustomized using the KM command Configuration>Node Status from theVeritas NetBackup icon. If there areany suspicious commands due toan error from the master/mediaserver, this parameter will be set toSuspicious state.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
NBUPolicyCollector Collects Veritas NetBackup policyand policy client relatedinformation. It sets all consumerparameters in the NBU_POLICY_CONTAINER,NBU_POLICY, and NBU_PCLIENTapplication classes.By default, this collector isexecuted only on the master server.
Poll Time: 900 seconds
n/a n/a n/a
NBUPoolCollector Collects Veritas NetBackup volumepool related information. It sets allconsumer parameters in NBU_POOL_CONTAINER andNBU_POOL application classes.By default, this collector isexecuted only on the master server.
Poll Time: 1800 seconds
n/a n/a n/a
NBURequestCollector Collects Veritas NetBackup pendingrequest related information. It setsall consumer parameters in the NBU_MOUNT_CONTAINER andNBU_MOUNT application classes.By default, this collector isexecuted only on the master server.
Poll Time: 300 seconds
n/a n/a n/a
175 NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description Units Default AlertConditions
Type
NBUStorageCollector Collects Veritas NetBackup storagepool related information. It sets allconsumer parameters in the NBU_STORAGE_CONTAINER,NBU_STORAGE, NBU_DPOOL andNBU_DVOLUME applicationclasses. By default, this collector isexecuted only on the master server.
Poll Time:1800 seconds
n/a n/a n/a
NBUUpdateAgent Is used by the NetBackup KM to setthe PATROL Agent KM variableswhen the PATROL Console user isnot authorized to update (ACL) anyPATROL Agent variables. It isactivated automatically when theKM fails to update the PATROLAgent.
Poll Time: 300 seconds
n/a n/a n/a
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Application Name Name of the application monitored by this Knowledge Module.
Application Version Version of the application monitored by this Knowledge Module.
Master Server(s) Names of the discovered Master Servers.
Media Server(s) Names of the discovered Media Servers.
Node Name(s) Name of the current managed system (node) as defined in Veritas NetBackup.
Node Type Type of node (Master Server or Media Server).
Host Name Name of the host as configured on the PATROL Agent.
Platform Operating system platform as reported by the PATROL Agent (HP, SOLARIS,RS6000, or NT).
Operating System Operating system description as reported by PATROL Agent.
Installation Path Veritas NetBackup software installation path.
Binary Path Veritas NetBackup software binary paths used by NBU KM.
Library Path Veritas NetBackup software library paths used by NBU KM.
Monitoring Mode Monitoring mode of the Knowledge Module.
Monitoring Node Node currently monitoring Veritas NetBackup.
176NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Refresh Process Cache Forces the PATROL Agent to reload its process cache from the kernel processlist.
Force Discovery Forces application discovery.
Refresh Parameters Forces an update of the application parameter values.
Reload Commands Reloads commands used by the NBU KM during the next full discovery cycle. Bydefault, all new commands are reloaded automatically.
Administration > StartMaster Server
Starts master server daemons.
Administration > StopMaster Server
Stops master server daemons.
Administration > StartMedia Server
Starts media server daemons.
Administration > StopMedia Server
Stops media server daemons.
Configuration > Login Accesses the Login Configuration dialog for viewing and entering NBU KM logindetails for the operating system.This user account should have privileges to execute Veritas NetBackupadministration commands and can use sudo privileges on Unix PATROL Agents.This user account will be used by NBU KM pre-discoveries, discoveries, datacollectors, recovery actions, and InfoBoxes to execute operating systemcommands. It will not be used by any KM commands.The password is encrypted and stored on the PATROL Agent using the BMCPATROL encryption function.
Configuration > Monitoring Mode
Accesses the Failover Mode Configuration dialog, which is used for enabling ordisabling KM failover, when monitoring clustered Veritas NetBackupenvironment.
Configuration > Paths Accesses the Path Configuration dialog, which displays and sets all paths usedby NBU KM.Paths are automatically discovered by the NBU KM server discovery. They areused as environment variables for executing various Veritas NetBackupapplication commands. Altering these paths may impact the operation of theKM.
KM paths are used as environment variables and internally:
KM_HOME keeps all KM scripts.
KM_TEMP is used for creating KM temporary files.
KM_DEBUG is used for creating KM debug files.
Installation Path is the application installation path discovered by the KM. Thisinformation can be overridden through this menu
Binary Paths are the application and operating system binary path, which is used forsetting PATH environment variable. The KM discovers and set this automatically. Thismenu can be used, if the discovered paths are incorrect.
177 NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Function Description
Library Paths are the application and operating system library path, which is used forsetting the following environment variables:
LD_LIBRARY_PATH (on Solaris)
SHLIB_PATH (on HP-UX)
LIBPATH (on AIX)
The KM discovers and set this automatically. This menu can be used, if the discovered pathsare incorrect.
Log Directory Path is the application log path discovered by the KM, where NetBackupmaintains the daily messages logs.
Remote Temp Directory Path (remote nodes only) is used for creating KM temporary fileson the remote node.
Configuration > NodeType
Accesses the Node Type dialog, which displays and sets the type of the VeritasNetBackup application node.The NBU KM master/media server discovery detects the type of the nodeautomatically; the type can either be Master Server or Media Server. Theoperation of the KM depends on this node type.
Configuration > NodeStatus
Accesses the Node Status Configuration dialog for viewing and modifying thedaemon names monitored for node status.The NBU KM checks for the existence of these daemons to determine the statusof the node (parameter NBUNodeStatus). By default, the following daemons aresought:
Configuration > InstanceLimits
Accesses the Instance Limits Configuration dialog to view and modify themaximum number of NBU KM application instances allowed for eachapplication class.
Configuration > Debug Accesses the Debug Configuration dialog for enabling/disabling the NBU KMdebug switches. By default, all KM debug messages are sent to a set of files anda task window.
KM Status Generates a summary report containing information on the managed system.
178NBU_SERVER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_STORAGE_CONTAINERIcon
Parameters
Name Description Units Default AlertConditions
Type
NBUStorageCollectorExecTime
This is a standard parameter whichmonitors the collector execution time.
It will run every minute and trigger awarning when the collector runs formore than the observed maximumtime. This maximum time can beoverridden by a preset value (example:3600 seconds), using the PSL below:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBUStorageCollectorWarn", 3600);
seconds Warning > presetvalue orobservedmaximum(default)
CollectionStatus
NBUStorageDetails Set by NBUStorageCollector.Displays all data returned to thestandard out from commandsexecuted by the data collector.
n/a n/a n/a
For detailed information about Baselining and KPI, see Managing Baselines and Key Performance Indicators.
* Parameters marked with an asterisk are used by default when visualizing the corresponding monitor instance inTrueSight OM.
InfoBox
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
179 NBU_STORAGE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Function Description
Configuration > Storages Accesses the dialog for specifying which storages are to be monitored by theNBU KM. By default, all local and remote storages are monitored for a masterserver and all local storages are monitored for a media server.
Configuration > StoragesUp/Down Status
Accesses the global configuration for determining the up/down status formonitored storage instances.
By default, the following NBUStorageUpDownState toNBUStorageUpDownStatus mapping rule is used:
Configuration > DiskPools
Sets which disk pools of the selected storage are to be monitored by the NBUKM. By default, all disk pools of the selected storage are monitored.
Configuration > DiskPools Up/Down Status
Accesses the global configuration for determining the up/down status formonitored disk pool instances.
By default, the following NBUDPoolUpDownState to NBUDPoolUpDownStatusmapping rule is used:
Configuration > DiskVolumes
Accesses the dialog for specifying which disk volumes of the selected disk poolare to bemonitored by the NBU KM. By default, all disk volumes of the selected disk poolaremonitored.
Configuration > DiskVolumes Up/Down Status
Accesses the global configuration for determining the up/down status formonitored disk volume instances.
By default, the following NBUDVolumeUpDownState toNBUDVolumeUpDownStatus mapping rule is used:
180NBU_STORAGE_CONTAINER
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_STORAGEIcon
Parameters
Storage monitoring is disabled in passive multi-node mode
Name Description Units Default AlertConditions
Type
NBUStorageSummary Set by NBUStorageCollector.Summarizes the storageinformation as reported bycommands executed by the datacollector.
n/a n/a n/a
NBUStorageUpDownState
Set by NBUStorageCollector.Displays the up/down state of thestorage.
0 = Down1 = Up-1 =Unknown
None Availability
NBUStorageUpDownStatus
Set by NBUStorageCollector.Monitors the up/down status of thestorage. This status is determinedby the storage status mapping ruledefined in the KM commandConfiguration>Storage(s) Status.
If this status parameter changes towarning or alarm state, therecovery action will trigger an eventand annotate the last data point.
0 = OK1 =Suspicious2 = Failure
Warning = 1Alarm = 2
Availability
InfoBox
Name Description
Storage Server Name of the host where the storage is attached to.
Storage Server Type Type of the storage server.
Description Description of the storage.
Storage Type Type of storage.
Up/Down State Up/down status of the storage.
181 NBU_STORAGE
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Name Description
Collector Name Name of the data collector that sets variables and parameters under thisapplication instance.
Collector Last Start Date & time when the last data collection cycle started.
Collector Last End Date & time when the last data collection cycle completed.
Collector Next Start Date & time when the next data collection cycle is expected to start.
Collector Status Data collector execution status (Idle or Running).
Menu Commands
Function Description
Configuration > Storage Sets the storage instance to be enabled or disabled for monitoring by the NBUKM.
Configuration > StorageUp/Down Status
Accesses the individual configuration for determining storage up/down statusfor the selected storage instance.By default, the global NBUStorageUpDownState to NBUStorageUpDownStatusmapping rule is used, as configured at the container level.
Configuration > DiskPools
Sets which disk pools of the selected storage are to be monitored by the NBUKM. By default, all disk pools of the selected storage are monitored.
Configuration > DiskPools Up/Down Status
Accesses the configuration for determining up/down status for the monitoreddisk pool instances on the selected storage instance.By default, the global NBUDPoolUpDownState to NBUDPoolUpDownStatusmapping rule is used, as configured at the container level.
Configuration > DiskVolumes
Accesses the dialog for specifying which disk volumes of the selected disk poolare to be monitored by the NBU KM. By default, all disk volumes of the selecteddisk pool are monitored.
Configuration > DiskVolumes Up/Down Status
Accesses the configuration for determining up/down status for the monitoreddisk volume instances on the selected storage instance.By default, the global NBUDVolumeUpDownState toNBUDVolumeUpDownStatus mapping rule is used, as configured at thecontainer level.
Managing Baselines and KeyPerformance IndicatorsTo detect abnormalities on the monitored environment, BMC TrueSight Operations Managementcalculates baselines per attribute based on values collected over a specified period of time todetermine a normal operating range. When the collected values for these parameters are out ofrange, an alert is triggered. Some attributes are identified by default as Key PerformanceIndicators (identified with the icon) and automatically included in the base lining calculation.
182Managing Baselines and Key PerformanceIndicators
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Managing baselines
The baseline is the expected normal operating range for an attribute of a monitor. There are twobaselines: Baseline High and Baseline Low. Baseline High represents the point at which 95% ofthe weighted average of the historical values fall below this value for the selected time period; Baseline Low represents the point at which 90% of the weighted average of historical values forthe selected time period fall above this line.
Baselines are generated for KPI attributes that have an active abnormality thresholds.
Managing Key Performance Indicators
Starting from v9.5 of BPPM, attributes that have not been initially designated in the KM as KeyPerformance Indicators (KPIs) cannot be flagged as KPIs from BPPM/TrueSight. Although enablingbaseline is possible through the Options > Administration > Intelligent Event Thresholds featureavailable in the Infrastructure Management Server operator console, BMC does not recommenddoing it.
For more information, refer to the BMC TrueSight Operations Management documentation available f romdocs.bmc.com.
184Troubleshooting
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
TroubleshootingThe table below will help you diagnose any problem you may encounter when installing orrunning Veritas NetBackup KM for PATROL. Here are some troubleshooting tips:
For any problem, look for error messages on the PATROL Console System Output Window(SOW). Most error messages are self-explanatory.
Most KM problems are reported in the KM Status Report, which can be viewed by selectingthe menu KM Status from the Veritas NetBackup or NBU_SETUP icon. Run this report todiagnose any problems.
The NetBackup KM triggers PEM events for most severe problems. Each event triggered fromthe KM includes an Expert Advice, which provides details about the problem and somesuggestions to resolve it.
Problem Possible Resolution
Unable to find NBU_LOAD.kml
Check that the Load KM browser is looking for *.kml files under PATROL_HOME/lib/knowledge folder.
Veritas NetBackup KM for PATROL files have not been installed correctly under the PATROL installationdirectory on the PATROL Console.
VeritasNetBackupicon does notappear after loading
Check that the KM is loaded using NBU_LOAD.kml and that NBU_MAIN is loaded.
Check that there is no KM version mismatch between the PATROL Console and the PATROL Agent.Check the messages in the PATROL Console SOW to verify this.
Check whether the PATROL Agent tuning variable,/AgentSetup/AgentTuning/pslInstructionMax hasbeen increased as suggested in section Changes to BMC PATROL. Check the messages in the PATROLConsole SOW.
Check whether the PATROL Agent user has necessary privileges added in the Agent’s Access ControlList (/AgentSetup/accessControlList) in order to read and write to the Agent Configuration Database.
Parameter NBULoginStatus is in suspicious (warning)status
This parameter will show a “suspicious” state if any command executed by NetBackup KM fails.
Check the annotation point on the first state change data point of this parameter to look for any failingcommands. If an annotation point cannot be found, or if it is not up-to-date, check the KM StatusReport, which can be viewed by selecting the menu KM Status from the server icon. These errors areproduced from the Veritas NetBackup commands executed by the NetBackup KM.
Check that the operating system user configured in the menu Configuration>Login can execute allNetBackup commands and access the NetBackup files.
All/some KM objectsdisappear from theConsole
Check whether there is a KM version mismatch between the PATROL Console and the PATROL Agent,possibly after an improper upgrade of the KM. Check the messages in the PATROL Console SOW toverify this.
Check that the NetBackup KM login details are still valid. Has the password changed on the system?Look for any error messages on the SOW, and check for additional information in the last annotationpoint for parameter NBULoginStatus.
All/some KM application instances donot appear
Check that the KM instance limits have not been exceeded. Look for any error messages on the SOW,and increase the instance limits for affected objects using the menu Configuration>Instance Limits.
Check whether the server icon is in offline state. None of the data collectors will be executed until theserver is enable and online.
If the KM is configured for multi-node mode monitoring, some components are not monitored on thepassive cluster node.
185 Troubleshooting
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Problem Possible Resolution
Behavior ofthe NetBackup KMhasnot changed in accordancewith theRelease Notesaftera KM upgrade
Check the version of the KM from the main InfoBox. If it has not changed, then the installation is notcomplete. Make sure both the PATROL Console and the PATROL Agent are uninstalled and installedcorrectly during the KM upgrade
NetBackup KMtakes a longtime torefresh the parametersand applicationclasses on the PATROL Console
Data collectors run according to their scheduling interval (polling cycle) defined in the KM. Theseintervals are defined for a standard environment with minimal resource impact. These intervals can becustomized from the PATROL Developer Console or PCM to suit your environment. Refer to the PATROL
Console User Guide for more details.
Poorperformance of the Veritas NetBackup master/mediaserver after installingthe KM
This happens if the NetBackup KM is installed on a heavily used system. Depending on the complexity ofyour Symantec NetBackup environment, the NetBackup KM may consume more resources to interrogatethe application and process the data. In such a complex environment, the NetBackup KM may requiresome fine tuning to optimize the available resources. Consider the following options:
Disable monitoring of unnecessary application instances. This can be achieved by using theappropriate Configuration Menu. Refer to the section Filtering Elements to Monitor.
Increase the scheduling interval (polling cycle) for data collectors.
Deactivate monitoring non-critical components by setting the Instance Limits to 0 (Zero).
Deactivate unnecessary data collectors during selected time intervals, where there are no SymantecNetBackup activity. For example, if the job monitoring can be disabled between 9 am and 4 pmeveryday, except weekends, then disable job data collector (NBUJobCollector) during this period,using following PSL through PATROL Console:
%PSL pconfig("REPLACE","/Runtime/NBU/<node-id>/NBUJobCollectorMode",
"0|32400|57600|0|0|||||||||||0|0");
Here the pconfig variable is named as: <collector name>Mode. Replace <node-id> with the appropriatenode ID of the NetBackup server. The value contains following details, delimited by pipe (|):enabled (1)/disabled (0) data collection, default start/end times in number of seconds since midnight, start/endtimes for non-default days starting from Sunday through to Saturday.
The JOB_TEXT command which sets display only text parameter NBUJobText, can be disabled toimprove the performance using the PSL below. Replace <node-id> with the appropriate node ID of theNetBackup server and restart the PATROL Agent:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBU_JOB/
jobCollectText", 0);
As part of collection, the collector compares each job against previous similar backup to calculate theprogress data. In addition the last backup info is shared under NBU_POLICY parameters(NBUPolicy*Backup*) to monitor the success at the policy level. This functionality can also be disabledto speed up the collector, using the PSL below. Replace <node-id> with the appropriate node ID of theNetBackup server and restart the PATROL Agent:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/NBU_JOB/
jobCollectLastBackupStats", 0);
186Troubleshooting
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Problem Possible Resolution
Defining a "no command execution window" for all collectors will pause running commands at peaktimes or during NetBackup maintenance windows. This can be set using the PSL below. Replace <node-id> with the appropriate node ID of the NetBackup server and restart the PATROL Agent:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/noExecuteWindow",
"23:59:00|120");
The value of this permanent configuration variable is in format “<start time in HH:MM:SS 24-hour clock>|<duration in seconds>”. The above “23:59:00|120” sets all collectors to sleep between 23:59:00 and00:01:00 (2 minutes) every day before executing commands. Also this noExecutewindow supportsmultiple time windows:
%PSL pconfig("REPLACE", "/Runtime/NBU/<node-id>/noExecuteWindow",
["23:59:00|120","11:59:00|120"]);
Replace <node-id> with the appropriate node ID.
Purge unnecessary information in Symantec NetBackup catalog databases and log files.
If there are too many clients configured in Symantec NetBackup, the NBUClientCollector andNBUPolicyCollector may affect the overall performance. In such environment disable theNBUClientCollector, or set their instance limits to 0 (zero), using menu Configuration> Instance Limits.
Also refer to Infinite Loop Errors for a possible PATROL internal scheduling delay which may impact theperformance of the KM.
Old active jobsare not removedfrom the console
By default, all active jobs are monitored, and they are exempted from ageing. It is possible to change thisbehavior by Including Active Jobs in the menu Configuration>Jobs from Jobs container.
Infinite LoopErrors(Errormessages on the SOWreporting that some NetBackup KM data collectorsmay be in aninfinite loop)
Check the setting of the tuning variable /AgentSetup/AgentTuning/pslInstructionMax.
PATROL Agent uses the pre-configured tuning variable (/AgentSetup/AgentTuning/pslInstructionMax) tostop running PSL functions in an infinite loop. When a PSL function reaches this maximum threshold, itreports this error, and puts the execution of this function to the back of the process queue. This will notonly delay the data collector, it will also impact the performance of the system.
To resolve this situation, the maximum number of instructions should be increased to an optimum value.This depends on the complexity of your environment. It is required that the default value of 500,000should be increased to at least 5,000,000 on a standard Veritas NetBackup environment to enable theNetBackup KM data collectors to execute without impacting your system.
If this still does not resolve the problem, you can disable this functionality by setting the value of thetuning variable to zero (0).
Unable to turnon the KM Debug
If you are unable to turn on the KM Debug following the method described in Debugging the KM , you turnthe debug on by setting appropriate PATROL Agent configuration variable with a timestamp value. Thistimestamp value determines when the debug should be turned off. For example, to turn on the debug for60 minutes from now, run the following PSL through PATROL Console:
%PSL pconfig("REPLACE","/Runtime/NBU/<component>Debug",
time()+3600);
Where <Component> is either server for debugging the server discovery or name of the collectorcomponent in lower case followed by “Collector”, like daemonCollector for debugging daemon collector.
Oldacknowledged jobs are stillkept in the pconfig
By default the KM stores all acknowledged jobs. Use the following PSL through PATROL Console to keeponly the last <Number> of jobs on <node-id):
%PSL pconfig("REPLACE",
"/Runtime/NBU/<node-id>/NBU_JOB/jobAcknowledgementCapacity",
<Number>);
187 Troubleshooting
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Problem Possible Resolution
database.Replace <node-id> with the appropriate node ID of the NetBackup server.
Prefer adifferent job instancelabel
By default the job instances are labeled as:
<policy>:<policy client> @ <date/time>
This label can be changed to include job ID as in one of the following formats:
Format 1: <job id>
Format 2: <job id>: <policy client> @ <date/time>
Format 3: <job id>: <policy>:<policy client> @ <date/time>
Use the following PSL through PATROL Console to modify the job instance label:
%PSL pconfig("REPLACE","/Runtime/NBU/<node-id>/labelByJobID",
<Format Number>);
Where:
<node-id> is the appropriate node ID of the NetBackup server
<Format Number> is either 1, 2, or 3 as described above. Use the menu Force Full Collection from theJobs container instance to recreate the job instances.
188Troubleshooting
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Impact on ResourcesThis section describes:
• CPU and memory usage of the KM
• Network traffic generated by the KM
CPU and Memory Usage
CPU and memory usage will depend on the size and complexity of your environment and yourNetBackup KM configuration. As you increase data collection frequency, increase the number ofservers and components monitored by the KM, your CPU and memory usage will increase.
When monitoring a standard local installation of Veritas NetBackup using NetBackup KM, thePATROL Agent will consume between 5MBytes and 10MBytes of additional system memory. Anenterprise installation of Veritas NetBackup Master Server with multiple Media Servers, Clients,Storage Servers and Storage Units can consume more memory (as per other KMs used by thePATROL Agent). The memory usage of NetBackup KM can be reduced by:
• disabling monitoring unnecessary component instances (by using the configuration menu)
• disabling unwanted components (by setting their instance limits to 0)
• disabling unwanted collectors (by using the PATROL Configuration Manager)
• increasing the collector scheduling interval (by using the PATROL Configuration Manager)
• decreasing the instance limits to limit the number of instances created by the collectors
The data collectors in NetBackup KM uses Veritas NetBackup command line interface to obtainVeritas NetBackup information. Most of the performance degradation is associated with thesecommand executions and amount of data returned. It may improve the overall performance, ifthe regular housekeeping is followed on all Veritas NetBackup systems.
Network Traffic
When monitoring a NetBackup server through a local PATROL Agent, the NetBackup KMgenerates minimal network traffic. Most of the data is kept on the managed node. The amount ofnetwork traffic that it generates depends on the number of PATROL Consoles that are connectedto the PATROL Agent and the frequency of data collection.
When monitoring remote NetBackup servers, some network traffic will be observed as ittransfers the commands result over the network. The traffic depends on the amount of datapolled during each command execution. When commands are expected to return large output,the KM is designed to use file transfers through SFTP (on UNIX/Linux) and Windows file shares(on Windows).
189
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Index
- A -Abnormalities 181
Access
Executable Files 17
Files 17
Library Files 17
Paths 17
Permissions 17Acknowledge
Alarm 96
Alerts 96
Job Alerts 96
Log Alerts 96
Mount Request 65
Warning 96Acknowledgement
Configure 88
Job 88
Log 88Administer
Veritas NetBackup 64Administration
Robotic Drives 66
Standalone Drives 66Agent
PATROL 55AIX 17
Alarm
Acknowledge 96Alarm Filter State Rules 76
Alert Acknowledgement 88
Configure 88
Job 88
Log 88Alerts
Acknowledge 96Application Class
NBU_CLIENT 102
NBU_CLIENT_CONTAINER 100
NBU_DAEMON 106
NBU_DAEMON_CONTAINER 104
NBU_DATABASE 112
NBU_DATABASE_CONTAINER 109
NBU_DEVICE 116, 131
NBU_DEVICE_CONTAINER 114
NBU_DPOOL 119
NBU_DVOLUME 122
NBU_JOB 128
NBU_JOB_CONTAINER 125
NBU_LIBRARY 136
NBU_LIBRARY_CONTAINER 134
NBU_LOG 142
NBU_LOG_CONTAINER 140
NBU_MAIN 146
NBU_MEDIASERVER 149
NBU_MEDIASERVER_CONTAINER 147
NBU_MOUNT 153
NBU_MOUNT_CONTAINER 151
NBU_PCLIENT 155
NBU_POLICY 160
NBU_POLICY_CONTAINER 158
NBU_POOL 167
NBU_POOL_CONTAINER 165
NBU_SERVER 171
NBU_STORAGE 180
NBU_STORAGE_CONTAINER 178Available Media
Reports 165
- B -Baselines
Generation 181
Manage 181
Requirements 181
TrueSight 181Block
Monitoring 73BMC
BMC Portal 62
BMC Software PATROL Agent 14
BMC Software PATROL Console 14
Requirements 14
TrueSight 14BMC PATROL
Changes 14
pslInstructionMax 14
190
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
- C -CA
Mode 90Changes 8
Check
Instance Limits 58Classic
Mode 90Classic Mode
Force 90Clients
Delete 70
Disable 70
Enable 70
Status Configuration 76Cluster
Configure 68Clustering Application 68
Commands
Reload 92Configuration
About 146
Force Classic Configuration Mode 146
NetBackup Nodes 146
Preloading 146Configure
Alert Acknowledgement 88
Cluster 68
Jobs Exit Status Filter 85
KM User Account 55
Log Error Filter 82
Log Scan Limit 84
Monitoring Period 73
Multi-Node Monitoring Mode 68
NetBackup Nodes 54
Node Status 78
Node Type 68
Nodes 54
Paths 67
PATROL Agent 50
Policy Backup Restriction 87Console Administration 90
Customize
Monitored Mount Requests 80
Mount Request Date/Time Format 80
Mount Request Status 80
Mount Requests 80
- D -Daemons
Delete 70
Disable 70
Enable 70
Status Configuration 76Data Collection for Jobs
Force 91Data Collectors
Force 91Databases
Delete 70
Disable 70
Enable 70Debug
Disable 93
Enable 93
End 93
Files 93
Path 93Delete
Clients 70
Daemons 70
Databases 70
Logs 70
Policies 70
Policy Clients 70
Robotic Drives 70
Robotic Libraries 70
Standalone Drives 70
Storages 70
Volume Pools 70Disable
Clients 70
Daemons 70
Databases 70
Debug 93
Logs 70
Monitoring 54
Policies 70
Policy Clients 70
Robotic Drives 70
Robotic Libraries 70
Standalone Drives 70
Storages 70
191
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Disable
Volume Pools 70Discoveries
Force 91Discovery
Verify 58Disk Space
Requirements 23
- E -Enable
Clients 70
Daemons 70
Databases 70
Debug 93
Logs 70
Monitoring 54
Policies 70
Policy Clients 70
Robotic Drives 70
Robotic Libraries 70
Standalone Drives 70
Storages 70
Volume Pools 70
- F -Failover Group Name 68
Files 27
ins_ALL_<version>.tar 26
ins_WINDOWS_<version>.exe 26
Setup 27
setup.exe 30
setup.sh 30
uninstall.exe 43
uninstall.sh 43Filtering Options
Clients 70
Daemons 70
Databases 70
Logs 70
Policies 70
Policy Clients 70
Robotic Drives 70
Robotic Libraries 70
Standalone Drives 70
Storages 70
Volume Pools 70Force
All Data Collectors 91
All Discoveries 91
Classic Mode 90
Full Data Collection for Jobs 91
Selected Data Collectors 91FQDN 54
- G -Generate
Baselines 181
- H -Hostname 54
HP-UX 17
- I -Improvement 8
InfoBox
Active 160
Application 102
Application Name 171
Application Version 171
Attempt 128
Available FS Space 142
Barcode 153
Binary Path 171
Client 128, 153
Collector Last End 100, 102, 104, 106, 109,112, 114, 116, 119, 122, 125, 128, 131, 134,136, 140, 142, 147, 149, 151, 153, 155, 158,160, 165, 167, 178, 180
Collector Last Start 100, 102, 104, 106,109, 112, 114, 116, 119, 122, 125, 128, 131,134, 136, 140, 142, 147, 149, 151, 153, 155,158, 160, 165, 167, 178, 180
Collector Name 100, 102, 104, 106, 109,112, 114, 116, 119, 122, 125, 128, 131, 134,136, 140, 142, 147, 149, 151, 153, 155, 158,160, 165, 167, 178, 180
Collector Next Start 100, 102, 104, 106,109, 112, 114, 116, 119, 122, 125, 128, 131,134, 136, 140, 142, 147, 149, 151, 153, 155,158, 160, 165, 167, 178, 180
192
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Collector Status 100, 102, 104, 106, 109,112, 114, 116, 119, 122, 125, 128, 131, 134,136, 140, 142, 147, 149, 151, 153, 155, 158,160, 165, 167, 178, 180
Command 106
Completion Status 128
Control 116, 131
Copyright 146
Density 153
Description 102, 106, 112, 116, 119, 122,131, 142, 153, 155, 160, 167, 180
Device Host 116, 131
Disk Media ID 122
Disk Pool Name 122
Disk Type 122
Drive Index 116, 131
Duration 128
End 128
Exit Status 128
External Media ID 153
Files 128
Free Space 122
FS Percent Used 142
Group 167
Hardware 102, 155
High Watermark 119
Host Name 167, 171
Installation Path 102, 171
Job ID 128, 153
Job PID 128
Job Type 153
Keyword 160
Last Backup 112
Last Backup Duration 128
Last Backup End 128, 155, 160
Last Backup Files 128
Last Backup Job ID 112, 128, 155, 160
Last Backup Mode 112
Last Backup Size 128
Last Backup Start 128, 155, 160
Last Backup Status 155, 160
Last Full Backup End 155, 160
Last Full Backup Job ID 155, 160
Last Full Backup Start 155, 160
Last Incr Backup End 160
Last Incr Backup End Time 155
Last Incr Backup Job ID 155, 160
Last Incr Backup Start 155, 160
Last Purge 112, 142
Library Path 171
Log File Modification Time 142
Log File Size 142
Low Watermark 119
Master Server(s) 171
Max Jobs/Policy 160
Media ID 116, 131
Media Server 128, 153
Media Server(s) 171
Mode 153
Monitoring Mode 171
Monitoring Node 171
Multiple Data Stream 160
Name 102, 106, 112, 116, 119, 122, 131,142, 149, 155, 160, 167
Node Name(s) 171
Node Type 171
Number of Read Mounts 122
Number of Write Mounts 122
Operating System 102, 155, 171
Operation 128
Owner 106, 128
Path 112, 116, 131, 142
PATROL Agent version 146
Percent Completed 128
PID 106
Platform 171
Policy Name 128, 153, 155
Policy Type 128
PPID 106
Priority 128, 155, 160
Product Name 146
Product Release Date 146
Product Version 146
Raw Size 119
Recorded Media ID 153
Request ID 116, 131, 153
Request Time 153
Residence 160
Robot Drive Number 131
Robot Number 131
Robot Type 131
Schedule 128
Schedule End 128
Schedule Start 128
Schedule Type 128
Serial Number 116, 131
Size 128
193
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
InfoBox
Start 128
Status 102, 106, 116, 128, 131, 149, 160
Storage Server 119, 122, 180
Storage Server Type 119, 180
Storage Type 180
Storage Unit 128, 153
Subtype 128
Support 146
Time Remaining 128
Total Capacity 122
Total FS Space 142
Type 116, 128, 131, 149, 160
Up/Down State 119, 122, 180
Usable Size 119
Used Percent 122
User 116, 131, 153, 167
Version 102
Volume Group 153
Volume Pool 160
Website 146Install / Un-install 29, 43
BMC Software Installation Utility 26
Log 30
Packages 27
Procedure 30
Setup Files 27Instance Limits
Check 58Integration
BMC TrueSight Operations Management 62Introduction 29
IP Address 54
Issues
Fixed 8
- J -Job Alerts
Acknowledge 96Jobs
Configure 73
Monitoring Period 73
Status Configuration 76Jobs Exit Status Filter
Configure 85
- K -Key Performance Indicators
Manage 181
TrueSight 181KM
Configure 55
Initial Setup 60
Load 49, 50, 62
Preload 50
Preloaded 51, 52
Unload 51, 52
User Account 55KPI
Manage 181
TrueSight 181
- L -Linux 17
Load
KM 49, 50, 62
PATROL Central 50Log Alerts
Acknowledge 96Log Error Filter
Configure 82Log Scan Limit
Configure 84Logs
Delete 70
Disable 70
Enable 70
- M -Maintenance 73
Manage
Baselines 181
KPI 181
TrueSight 181Managed Node
Status Configuration 76Master Server
Configure 68Master/Media Server
194
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Master/Media Server
Start 64
Stop 65Media Server
Configure 68Menu Commands
Acknowledgement 125, 128, 142
Administration 116, 131, 151, 153, 171
Alarms 125, 142
Alert 128
All 125, 142
Assign 153
Assign All 151
Client 102
Client Status 102
Clients 100
Clients Status 100
Configuration 100, 102, 104, 106, 109,112, 114, 116, 119, 122, 125, 136, 140, 142,147, 149, 151, 155, 158, 160, 165, 167, 178,180
Daemon 106
Daemon List 104
Daemon Status 106
Daemons 104
Daemons Status 104
Database 112
Database Backup Information 109
Databases 109
Debug 171
Deny 153
Deny All 151
Disk Pool 119
Disk Pool Up/Down Status 119
Disk Pools 180
Disk Pools Up/Down Status 178, 180
Disk Volume 122
Disk Volume Up/Down Status 122
Disk Volumes 119
Disk Volumes Up/Down Status 119, 178,180
Drive Cleaning Statistics 114, 134
Force Discovery 171
Force Full Collection 125
Instance Limits 171
Jobs 125
Jobs Alert Acknowledgement 125
Jobs Erroneous Exit Status 125
Jobs Status 125
KM Status 171
Log 142
Log Alert Acknowledgement 142
Log Filter 142
Log Scan Limit 142
Login 171
Logs 140
Logs Alert Acknowledgement 140
Logs Filter 140
Logs Scan Limit 140
Media List 167
Media Server 149
Media Servers 147
Media Servers Status 147, 149
Messages List 140
Monitoring Mode 171
Mount Request Date/Time Format 151
Mount Requests 151
Mount Requests Status 151
Node Status 171
Node Type 171
Offline Drive 116, 131
Online Drive 116, 131
Paths 171
Pending Requests 151
Policies 158
Policies Backup Restriction 158
Policies Status 158
Policy 160
Policy Backup Restriction 160
Policy Client 155
Policy Clients 158, 160
Policy Schedule 160
Policy Status 160
Refresh Parameters 171
Refresh Process Cache 171
Reload Commands 171
Reports 104, 109, 114, 134, 136, 140, 151,160, 167
Resubmit 153
Resubmit All 151
Robotic Drive 131
Robotic Drive Status 131
Robotic Drives 136
Robotic Drives Status 134, 136
Robotic Libraries 134
Robotic Libraries Status 134
Robotic Library 136
Robotic Library Contents 136
195
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Menu Commands
Robotic Library Status 136
Standalone Drives 114, 116
Standalone Drives Status 114, 116
Start Master Server 171
Start Media Server 171
Stop Master Server 171
Stop Media Server 171
Storage 180
Storage Up/Down Status 180
Storages 178
Storages Up/Down Status 178
Volume Pool 167
Volume Pools 165
Warnings 125, 142Monitored Mount Requests
Customize 80Monitoring
Block 73
Blocked 73
Disable 54
Enable 54
Stop 73
Stopped 73Monitoring Period
Configure 73
Jobs 73
Mount Requests 73Mount Request
Acknowledge 65Mount Request Date/Time Format
Customize 80Mount Request Status
Customize 80Mount Requests
Configure 73
Customize 80
Monitoring Period 73
Status Configuration 76Multi-Node Monitoring Mode
Configure 68
- N -NBU_CLIENT
Application Class 102NBU_CLIENT_CONTAINER
Application Class 100
NBU_DAEMON
Application Class 106NBU_DAEMON_CONTAINER
Application Class 104NBU_DATABASE
Application Class 112NBU_DATABASE_CONTAINER
Application Class 109NBU_DEVICE
Application Class 116, 131NBU_DEVICE_CONTAINER
Application Class 114NBU_DPOOL
Application Class 119NBU_DVOLUME
Application Class 122NBU_JOB
Application Class 128NBU_JOB_CONTAINER
Application Class 125NBU_LIBRARY
Application Class 136NBU_LIBRARY_CONTAINER
Application Class 134NBU_LOG
Application Class 142NBU_LOG_CONTAINER
Application Class 140NBU_MEDIASERVER
Application Class 149NBU_MEDIASERVER_CONTAINER
Application Class 147NBU_MOUNT
Application Class 153NBU_MOUNT_CONTAINER
Application Class 151NBU_PCLIENT
Application Class 155NBU_POLICY
Application Class 160NBU_POLICY_CONTAINER
Application Class 158NBU_POOL
Application Class 167NBU_POOL_CONTAINER
Application Class 165NBU_SERVER
Application Class 171NBU_STORAGE
196
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
NBU_STORAGE
Application Class 180NBU_STORAGE_CONTAINER
Application Class 178New features 8
Node Status
Configure 78Node Type
Configure 68
Master Server 68
Media Server 68Nodes
Configure 54
FQDN 54
Hostname 54
IP Address 54
- O -Operating Systems
Linux 26, 27, 30, 43
Unix 26, 27, 43
Windows 26, 27, 30, 43Options
Common services 30
Console Systems role 30
Managed System 30
View Log 30Oracle Solaris Cluster 68
Overview 10
- P -Parameter
NBULoginStatus 55Parameters
BURequestCollectorExecTime 151
ExtraFilesList 171
NBUClientCollector 171
NBUClientCollectorExecTime 100
NBUClientDetails 100
NBUClientState 102
NBUClientStatus 102
NBUClientSummary 102
NBUCreateDistribution 171
NBUDaemonCollector 171
NBUDaemonCollectorExecTime 104
NBUDaemonCPUDuration 106
NBUDaemonCPUUtilization 106
NBUDaemonDetails 104
NBUDaemonMemorySize 106
NBUDaemonProcessCount 106
NBUDaemonState 106
NBUDaemonStatus 106
NBUDaemonSummary 106
NBUDatabaseBackupElapsed 109, 112
NBUDatabaseCollector 171
NBUDatabaseCollectorExecTime 109
NBUDatabaseDetails 109
NBUDatabaseFSSpaceUsedPercent 112
NBUDatabaseSpaceAvailable 112
NBUDatabaseSpaceGrowthRate 112
NBUDatabaseSpaceUsed 112
NBUDatabaseSpaceUsedPercent 112
NBUDatabaseStatus 109
NBUDatabaseSummary 112
NBUDPoolSummary 119
NBUDPoolUpDownState 119
NBUDPoolUpDownStatus 119
NBUDPoolVolumeCount 119
NBUDriveCollector 171
NBUDriveCollectorExecTime 114
NBUDriveDetails 114
NBUDriveState 116
NBUDriveStatus 116
NBUDriveSummary 116
NBUDriveThroughput 116
NBUDVolumeReadStreamCount 122
NBUDVolumeSpaceAvailable 122
NBUDVolumeSpaceGrowthRate 122
NBUDVolumeSpaceUsed 122
NBUDVolumeSpaceUsedPercent 122
NBUDVolumeSummary 122
NBUDVolumeUpDownState 122
NBUDVolumeUpDownStatus 122
NBUDVolumeWriteStreamCount 122
NBUFileExcludeList 155
NBUFileIncludeList 155
NBUJobActiveBackupCount 125
NBUJobActiveBackupReduction 125
NBUJobActiveCount 125
NBUJobActiveNonBackupCount 125
NBUJobCollector 171
NBUJobCollectorExecTime 125
NBUJobDetails 125
NBUJobDuration 128
NBUJobFileCount 128
197
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Parameters
NBUJobQueuedBackupCount 125
NBUJobQueuedBackupReduction 125
NBUJobSize 128
NBUJobState 128
NBUJobStatus 128
NBUJobSummary 128
NBUJobText 128
NBUJobThroughput 128
NBULibraryCollector 171
NBULibraryCollectorExecTime 134
NBULibraryDetails 134
NBULibraryMediaAssignedCount 136
NBULibraryMediaAvailableCount 136
NBULibraryMediaAvailablePercent 136
NBULibraryMediaCleaningLeft 136
NBULibraryMediaCount 136
NBULibraryMediaScratchCount 136
NBULibraryMediaScratchPercent 136
NBULibraryMediaUnassignedCount 136
NBULibraryMediaUnassignedPercent 136
NBULibraryState 136
NBULibraryStatus 136
NBULibrarySummary 136
NBULibraryThroughput 136
NBULibraryUpDriveCount 136
NBULogAlarmCount 142
NBULogAlarmText 142
NBULogCollector 171
NBULogCollectorExecTime 140
NBULogDetails 140
NBULogFSSpaceUsedPercent 142
NBULoginStatus 171
NBULogSpaceAvailable 142
NBULogSpaceGrowthRate 142
NBULogSpaceUsed 142
NBULogSpaceUsedPercent 142
NBULogSummary 142
NBULogText 142
NBULogWarningCount 142
NBULogWarningText 142
NBUMediaActiveCount 167
NBUMediaActivePercent 167
NBUMediaCount 167
NBUMediaFrozenCount 167
NBUMediaFullCount 167
NBUMediaFullPercent 167
NBUMediaLoadedCount 167
NBUMediaLoadedEmptyCount 167
NBUMediaLoadedEmptyPercent 167
NBUMediaReadOnlyCount 167
NBUMediaScratchCount 167
NBUMediaServerCollectorExecTime 147
NBUMediaServerDetails 147
NBUMediaServerState 149
NBUMediaServerStatus 149
NBUMediaServerSummary 149
NBUMediaSuspendedCount 167
NBUMediaUnassignedCount 167
NBUMediaUnassignedPercent 167
NBUMediaUnknownCount 167
NBUMediServerCollector 171
NBUMonitoringMode 171
NBUNodeStatus 171
NBUPClientBackupSummary 155
NBUPClientBackupThroughput 155
NBUPClientFullBackupDuration 155
NBUPClientFullBackupFileCount 155
NBUPClientFullBackupSize 155
NBUPClientIncrBackupDuration 155
NBUPClientIncrBackupFileCount 155
NBUPClientIncrBackupSize 155
NBUPClientSummary 155
NBUPolicyBackupElapsed 160
NBUPolicyBackupSummary 160
NBUPolicyBackupThroughput 160
NBUPolicyCollector 171
NBUPolicyCollectorExecTime 158
NBUPolicyDetails 158
NBUPolicyFullBackupDuration 160
NBUPolicyFullBackupElapsed 160
NBUPolicyFullBackupFileCount 160
NBUPolicyFullBackupSize 160
NBUPolicyIncrBackupDuration 160
NBUPolicyIncrBackupElapsed 160
NBUPolicyIncrBackupFileCoun 160
NBUPolicyIncrBackupSize 160
NBUPolicyState 160
NBUPolicyStatus 160
NBUPolicySuccBackupElapsed 160
NBUPolicySummary 160
NBUPoolCollector 171
NBUPoolCollectorExecTime 165
NBUPoolDetails 165
NBUPoolSpaceAvailable 167
NBUPoolSpaceGrowthRate 167
NBUPoolSpaceUsed 167
NBUPoolSpaceUsedPercent 167
198
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Parameters
NBUPoolSummary 167
NBURDriveState 131
NBURDriveStatus 131
NBURDriveSummary 131
NBURDriveThroughput 131
NBURequestCollector 171
NBURequestDetails 151
NBURequestElapsed 153
NBURequestState 153
NBURequestStatus 153
NBURequestSummary 153
NBUStorageCollector 171
NBUStorageCollectorExecTime 178
NBUStorageDetails 178
NBUStorageSummary 180
NBUStorageUpDownState 180
NBUStorageUpDownStatus 180
Refresh 91Paths
Binary 67
Configure 67
Debug Directory 67
Home Directory 67
Library 67
Netbackup Installation 67
NetBackup Log Directory 67
Temp Directory 67PATROL
Agent 55
PATROL Agent 51
PATROL Agent system 23
PATROL Central Console 51, 52
PATROL Central Console Server system 23
PATROL Central Web Server system 23
PATROL Console 51, 52
PATROL Console system 23PATROL Agent
Configure 50
Restart 60PATROL Console 49
Restart 60Permissions
Access 17Platforms
Unix 55Policies
Delete 70
Disable 70
Enable 70Policy Backup Restriction
Configure 87Policy Clients
Delete 70
Disable 70
Enable 70Preload
KM 50Preloaded
KM 51, 52Prepare
Debug Files 93
- R -Refresh
Parameters 91Release Notes 8
Reload
Commands 92remote PATROL Agent Checking 68
Reports
Available Media 165Requirements
Additional 14
BMC ProactiveNet Performance ManagementPortal 14
BMC Software PATROL Agent 14
BMC Software PATROL Console 14
Disk Space 23
Security 17
Software 14
Symantec NetBackup™ 14
System 13Restart
PATROL Agent 60
PATROL Console 60Robotic Drives
Administration 66
Delete 70
Disable 70
Enable 70
Status Configuration 76Robotic Libraries
Delete 70
Disable 70
Enable 70
199
Ver
itas
Net
Bac
kup
KM
fo
r P
ATR
OL
Ver
sion
3.1
.00
Robotic Libraries
Status Configuration 76
- S -Security
Requirements 17Setup
Check 60
Initial 60
KM 60Solaris 17
Standalone Drives
Administration 66
Delete 70
Disable 70
Enable 70
Status Configuration 76Start
Master/Media Server 64Status Configuration
Clients 76
Daemons 76
Jobs 76
Managed Node 76
Mount Requests 76
Robotic Drives 76
Robotic Libraries 76
Standalone Drives 76Stop
Master/Media Server 65Storages
Delete 70
Disable 70
Enable 70Sudo 55
User 17System
HP-UX 13
IBM AIX 13
Microsoft Windows 13
Oracle Solaris 13
Red Hat Linux 13
Requirements 13
- T -Troubleshooting 184
TrueSight
Abnormalities 181
Baselines 181
Key Performance Indicators 181
KPI 181
- U -Unix 55
Unload
KM 51, 52
- V -Verify
Application Discovery 58Veritas Cluster File System 68
Veritas Cluster Server 68
Veritas NetBackup
Administer 64Volume Pools
Delete 70
Disable 70
Enable 70
- W -Warning
Acknowledge 96Warning Filter State Rules 76
What's new 8
About Sentry Software™Sentry Software, a strategic Technology Alliance Partner of BMC Software, providescomprehensive multi-platform monitoring solutions that enable management of thehardware and software aspects of all servers and SANs and covering up to 100 % ofcustom applications within the BMC TrueSight environment. Sentry Software alsodevelops adapters for BMC Atrium Orchestrator that enables IT administrators toautomate the execution of common requests and tasks that occur in the daily course ofIT operations. Combined with BMC’s servers and network automation tools, theadapters allow IT administrators to implement provisioning and decommissioningworkflows that cover all layers of their IT infrastructure. Finally, Sentry Software designsconnectors that bring storage capacity metrics into BMC TrueSight Capacity Optimizationto ensure IT administrators that their storage infrastructure is properly sized for theircurrent and future needs.
Like us on Facebook:facebook.com/sentrysoftware
Follow us on Twitter:
twitter.com/sentrysoftware
LEARN MORE
To learn more about our solutions, please visit :www.sentrysoftware.com/solutions
© BMC Software, Inc. All rights reserved.
ABOUT MARKETZONE DIRECT PRODUCTS
The BMC MarketZone Directprogram sells and supportsthird-party products thatcomplement and/or augment BMCsolutions. MarketZone Directproducts are available under BMClicense and support terms.
About BMC Software™BMC Software helps leading companies around the world put technology at the forefrontof business transformation, improving the delivery and consumption of digital services.From mainframe to cloud to mobile, BMC delivers innovative IT management solutionsthat have enabled more than 20,000 customers to leverage complex technology intoextraordinary business performance—increasing their agility and exceeding anythingthey previously thought possible. For more information about BMC Software, visit
www.bmc.com.
Bus ines s thrives when IT runs s marter,fas ter and s tronger. That’s why the mos tdemanding IT organizations in the worldrely on BMC Software acros s dis tributed,mainframe, virtual and cloudenvironments . Recognized as the leader inBus ines s Service Management, BMC offersa comprehens ive approach and unifiedplatform that helps IT organizations cutcos t , reduce ris k and drive bus ines sprofit . For the four fis cal quarters endedSeptember 30,2011, BMC revenue wasapproximately $2.2 billion.
BUSINESS RUNS ON I.T .
I.T . RUNS ON BMC SOFT WARE
Top Related