04/08/23 Gandhi 1
Development of HACCP procedures for the production of soy based foods and their evaluation (RPF-III).
A.P.Gandhi
04/08/23 Gandhi 2
Project No: 583
Time spent: 25%
04/08/23 Gandhi 3
Objectives
i.To develop HACCP procedures for the production of different soy based foods.
ii. To test the developed procedures with a few soy-based foods such as full fat soy flour, soy milk, soy paneer (tofu), soy nuts and soy sprouts.
04/08/23 Gandhi 4
iii. To document the developed procedures and final report writing.
04/08/23 Gandhi 5
Technical program
The drafting of procedures include identification of hazards and control measures, determination of critical control points,
04/08/23 Gandhi 6
preparing the decision tree, establishing the critical limits and marketing procedures,
04/08/23 Gandhi 7
finding the corrective action, responsibilities and verification procedures ,
04/08/23 Gandhi 8
preparation of HACCP chart documentation &record keeping for the soy based foods.
04/08/23 Gandhi 9
Soy products:
Flour (Full fat soy flour and medium fat soy flour). Soymilk and analogs (Soymilk (Plain) and, Soy paneer) ,Bakery products (Cookies and bread), Soy nuts,Soy sprouts, and Soy protein isolates .
04/08/23 Gandhi 10
Date of Start: April 2007
Date of Completion: March 2009
The technical program was accomplished as approved.
04/08/23 Gandhi 11
Various soy based foods like full fat soy flour, medium fat soy flour, soy milk, soy paneer(tofu), soy bakery products ,soy nuts were developed besides the protein isolates which find place in food formulations/pharmaceutical applications.
These foods are to be produced with utmost safety.
04/08/23 Gandhi 12
The availability of safe food improves the health of people and is a basic human right.
Safe food contributes to health and productivity and provides an effective platform for development and poverty alleviation.
04/08/23 Gandhi 13
The poor are the most susceptible to ill health.
Trends in global food production, processing, distribution and preparation present new challenges to food safety.
04/08/23 Gandhi 14
Food safety must be addressed along the entire food chain by measures based on sound scientific information at both national and international levels.
Food safety is an essential public health issue.
04/08/23 Gandhi 15
Food safety programs are increasingly focusing on a farm- to –table approach as an effective means of reducing food borne hazards.
This holistic approach to the control of food related risks involves consideration of every step in the chain.
04/08/23 Gandhi 16
Now with the introduction of food quality and safety systems, HACCP has become synonymous with food safety.
HACCP is a tool for process control to overcome the microbial hazards.
The ultimate goal is improvement of public health.
04/08/23 Gandhi 17
It is a world wide recognized systematic and preventive approach that addresses biological, chemical and physical hazards through anticipation and prevention rather than through end-product inspection and testing and thereby reducing the food borne illness.
04/08/23 Gandhi 18
Prior to application of HACCP the production of soy based should be according to Codex General Principles of Food Hygiene, the appropriate Codex Codes of practice and appropriate food safety legislation.
04/08/23 Gandhi 19
Good Agricultural PracticesPrimary productionEnvironmental hygiene: Should not be carried out on in
areas where the presence of potentially harmful substances would lead to an un acceptable level of such substances.
04/08/23 Gandhi 20
Hygiene production of food sources:Producers should as far as
practicable implement measures to Control contamination from air, soil,
water, feed stuffs, fertilizers, pesticides, veterinary drugs or any other agent used in primary production.
04/08/23 Gandhi 21
Control plant and animal health. Protect food sources from faecal and
other contamination.Handling, storage and transport: Procedures should be in place to
sort food and food ingredients to segregate material which is evidently unfit for human consumption.
04/08/23 Gandhi 22
Dispose of any rejected material in a hygienic manner.
Protect food and food ingredients from contamination by pests, chemical, physical or microbiological contaminants.
04/08/23 Gandhi 23
Cleaning, maintenance and personnel hygiene at primary production:
Appropriate facilities and procedures should be in place to ensure that
Any necessary cleaning and maintenance is carried out effectively.
An appropriate degree of personnel hygiene is maintained.
04/08/23 Gandhi 24
Good Manufacturing ProcessEstablishment of Design and facilitiesLocation:EstablishmentsThey should be located away from Environmentally polluted areas and
industrial activities which pose serious threat of contaminating the food.
04/08/23 Gandhi 25
Areas subject to flooding unless sufficient safe guards are provided.
Areas prone to infestation of pests. Areas where wastes, either solid or
liquid can not be removed effectively.
04/08/23 Gandhi 26
Equipment:Equipment should be located so that it Permits adequate maintenance and
cleaning. Functions in accordance with its
intended use. Facilitates good hygiene practices
including monitoring.
04/08/23 Gandhi 27
Premises and rooms:Design and lay out Where appropriate the internal
design and lay out of food establishments should permit good food hygiene practices including protection against cross contamination between and during operation of food stuffs.
04/08/23 Gandhi 28
Internal structures and fittings: The surfaces of walls, partitions
and floors should be made of impervious materials with no toxic effect in intended use.
Walls and partitions should have a smooth surface up to a height appropriate to the operation.
04/08/23 Gandhi 29
Floors should be constructed to allow adequate drainage and cleaning.
Ceilings and overhead fixtures should be constructed and finished to minimize the build up of dirt and condensation and the shedding of particles.
04/08/23 Gandhi 30
Window should be easy to clean, be constructed to minimize the build up of dirt and where necessary be fitted with removable and cleanable insect proof screens.Where necessary windows should be fixed.
04/08/23 Gandhi 31
Doors should have smooth, non absorbent surfaces and be easy to clean and where necessary disinfect.
Working surfaces that come into direct contact with food should be in sound condition, durable and easy to clean.
04/08/23 Gandhi 32
Equipment: They can be adequately cleaned,
disinfected and maintained to avoid the contamination of food.
Equipment and containers should be made of materials with no toxic effect in intended use.
04/08/23 Gandhi 33
Where necessary equipment should be durable and movable or capable of being disassembled to allow for maintenance, cleaning, disinfections, monitoring.
04/08/23 Gandhi 34
Food control and monitoring equipment:
The equipment used to cook, heat treat, cool, store or freeze should be designed to achieve the required food temperatures as rapidly as necessary in the interests of food safety and suitability and maintain them effectively.
04/08/23 Gandhi 35
Containers for waste and inedible substances:
Containers for waste, by products and inedible or dangerous substances should be specifically identifiable, suitably constructed and where appropriate made of impervious material.
04/08/23 Gandhi 36
Containers used to hold dangerous substances should be identified and where appropriate, be lockable to prevent malicious or accidental contamination of food.
04/08/23 Gandhi 37
Personnel hygiene facilities and toilets:
Where appropriate adequate means of hygienically washing and drying hands, including wash basins and a supply of hot and cold water.
Lavatories of appropriate design. Adequate changing facilities for
personnel.
04/08/23 Gandhi 38
Temperature Control: Adequate facilities should be
available for heating, cooling, refrigerating and freezing food, for storing refrigerated or frozen foods, monitoring the food temperatures and when necessary controlling the ambient temperatures to ensure the safety and suitability of food.
04/08/23 Gandhi 39
Air Quality and ventilation:Adequate means of natural and
mechanical ventilation should be provided to
Control ambient temperatures. Minimize the air borne
contamination of food. Control odors. Control humidity where necessary.
04/08/23 Gandhi 40
Facilities:Water supply An adequate supply of potable
water with appropriate facilities for its storage, distribution and temperature control should be available where necessary to ensure the safety and suitability of food.
04/08/23 Gandhi 41
Potable water should be as specified in WHO Guidelines.
Non potable water shall have a separate system and shall be identified.
04/08/23 Gandhi 42
Drainage and waste disposal: Adequate drainage and waste
disposal systems and facilities should be provided.
04/08/23 Gandhi 43
Cleaning: Adequate facilities, suitably
designated should be provided for cleaning the food utensils and equipment. Such facilities should have an adequate supply of hot and cold potable water where appropriate.
04/08/23 Gandhi 44
Control of operation Adequate time, temperature or
humidity controls. Food grade packaging. Potable water supplies. Maintenance of equipment.
04/08/23 Gandhi 45
Maintenance and Sanitation Adequate level of maintenance of
an establishment as well as efficient practices for cleaning, waste management and pest control.
04/08/23 Gandhi 46
Personal Hygiene
Health Status: People known or suspected to be
suffering from or to be a carrier of a disease or illness likely to be transmitted through food should not be allowed.
04/08/23 Gandhi 47
Illness and injuries: Conditions which should be reported
include jaundice, diarrhea,vomiting, fever, sore throat with fever, visibly infected skin lesions and discharges from the ear , eye or nose.
04/08/23 Gandhi 48
Personnel cleanliness: They should wear suitable
protective clothing, head covering and footwear.Cuts and wounds where personnel are permitted to continue working should be covered by suitable water proof dressings.
04/08/23 Gandhi 49
Personnel should always wash their hands
-at the start of food handling activities.
-Immediately after using the toilet.
-After handling raw food or any contaminated material.
04/08/23 Gandhi 50
Personal Behavior: People engaged in food handling
activities should refrain from behavior which could result in contamination of food like smoking, spitting, chewing or eating and sneezing or coughing over unprotected food.
04/08/23 Gandhi 51
Visitors: Visitors to food manufacturing,
processing or handling areas should where appropriate wear protective clothing and adhere to other personal hygiene.
04/08/23 Gandhi 52
Transportation Method of transportation should be
such that measures are taken to prevent any contamination or deterioration of the product.
Controlled environments like chilled, frozen or stored under specific humidity levels.
04/08/23 Gandhi 53
Containers need to be maintained in good condition and be easy to clean.
Designed specifically for food use only.
04/08/23 Gandhi 54
Training All food handlers should be trained
in personal hygiene, and should be supervised by the trained supervisors.
04/08/23 Gandhi 55
Product information and consumer awareness:
The product should be accompanied by adequate information.
All batches should be identified by a batch or lot number to allow trace ability of the commodity if required.
04/08/23 Gandhi 56
Management commitment is necessary for implementation of an effective HACCP system.
04/08/23 Gandhi 57
No relevant published data is available on the usage of HACCP in the production of soy-based foods globally too.
04/08/23 Gandhi 58
Hence efforts were made to draft the HACCP procedures for the production of different soy based foods.
04/08/23 Gandhi 59
Food safety in today’s’ world is paramount.
HACCP programmes go a long way to ensuring this food safety.
We rely on food to nourish and sustain us.
We want food that is appealing and pleasurable to eat.
04/08/23 Gandhi 60
We need food that will not cause us injury or illness or severe cases cause death.
There are members of our community- the young, the not so young, the immunocompromised and those who are susceptible to allergies and intolerances that rely on us in the food industry to supply them with safe food.
04/08/23 Gandhi 61
May our efforts be not in vain as we meet this responsibility each day?
04/08/23 Gandhi 62
PRINCIPLES OF THE HACCP SYSTEM
PRINCIPLE 1
Conduct a hazard analysis.
PRINCIPLE 2
Determine the Critical Control Points (CCPs).
PRINCIPLE 3
Establish critical limit(s).
04/08/23 Gandhi 63
PRINCIPLES OF THE HACCP SYSTEM
PRINCIPLE 4
Establish a system to monitor control of the CCP.
PRINCIPLE 5
Establish the corrective action to be taken when monitoring indicates that a particular CCP is not under control.
04/08/23 Gandhi 64
PRINCIPLE 6
Establish procedures for verification to confirm that the HACCP system is working effectively.
PRINCIPLE 7
Establish documentation concerning all procedures and records appropriate to these principles and their application.
04/08/23 Gandhi 65
APPLICATION
1. Assemble HACCP team The food operation should assure
that the appropriate product specific knowledge and expertise is available for the development of an effective HACCP plan.
04/08/23 Gandhi 66
Optimally, this may be accomplished by assembling a multidisciplinary team. Where such expertise is not available on site, expert advice should be obtained from other sources.
04/08/23 Gandhi 67
The scope of the HACCP plan should be identified. The scope should describe which segment of the food chain is involved and the general classes of hazards to be addressed (e.g. does it cover all classes of hazards or only selected classes).
04/08/23 Gandhi 68
2. Describe product A full description of the product should be
drawn up, including relevant safety information such as: composition, physical/chemical structure (including Aw, pH, etc.), microcidal/static treatments (heat-treatment, freezing, brining, smoking, etc.), packaging, durability and storage conditions and method of distribution.
04/08/23 Gandhi 69
3. Identify intended use
The intended use should be based on the expected uses of the product by the end user or consumer. In specific cases, vulnerable groups of the population, e.g. institutional feeding, may have to be considered.
04/08/23 Gandhi 70
4. Construct flow diagram The HACCP team should construct
the flow diagram. The flow diagram should cover all steps in the operation. When applying HACCP to a given operation, consideration should be given to steps preceding and following the specified operation.
04/08/23 Gandhi 71
5. On-site confirmation of flow diagram
The HACCP team should confirm the processing operation against the flow diagram during all stages and hours of operation and amend the flow diagram where appropriate.
04/08/23 Gandhi 72
6. List all potential hazards associated with each step, conduct a hazard analysis, and consider any measures to control identified hazards.
The HACCP team should list all of the hazards that may be reasonably expected to occur at each step from primary production, processing, manufacture, and distribution until the point of consumption.
04/08/23 Gandhi 73
The HACCP team should next conduct a hazard analysis to identify for the HACCP plan, which hazards are of such a nature that their elimination or reduction to acceptable levels is essential to the production of a safe food.
04/08/23 Gandhi 74
7. Determine Critical Control Points There may be more than one CCP at
which control is applied to address the same hazard. The determination of a CCP in the HACCP system can be facilitated by the application of a decision tree which indicates a logic reasoning approach.
04/08/23 Gandhi 75
Application of a decision tree should be flexible, given whether the operation is for production, slaughter, processing, storage, distribution or other. It should be used for guidance when determining CCPs.
04/08/23 Gandhi 76
8. Establish critical limits for each CCP .
Critical limits must be specified and validated if possible for each Critical Control Point. In some cases more than one critical limit will be elaborated at a particular step.
04/08/23 Gandhi 77
Criteria often used include measurements of temperature, time, moisture level, pH, Aw, available
chlorine, and sensory parameters such as visual appearance and texture.
04/08/23 Gandhi 78
9. Establish a monitoring system for each CCP.
Monitoring is the scheduled measurement or observation of a CCP relative to its critical limits.
The monitoring procedures must be able to detect loss of control at the CCP.
04/08/23 Gandhi 79
Further, monitoring should ideally provide this information in time to make adjustments to ensure control of the process to prevent violating the critical limits.
Where possible, process adjustments should be made when monitoring results indicate a trend towards loss of control at a CCP.
04/08/23 Gandhi 80
10. Establish corrective actions . Specific corrective actions must be
developed for each CCP in the HACCP system in order to deal with deviations when they occur.
04/08/23 Gandhi 81
The actions must ensure that the CCP has been brought under control. Actions taken must also include proper disposition of the affected product.
Deviation and product disposition procedures must be documented in the HACCP record keeping.
04/08/23 Gandhi 82
11. Establish verification procedures . Verification and auditing methods,
procedures and tests, including random sampling and analysis, can be used to determine if the HACCP system is working correctly.
The frequency of verification should be sufficient to confirm that the HACCP system is working effectively.
04/08/23 Gandhi 83
12. Establish Documentation and Record Keeping .
Efficient and accurate record keeping is essential to the application of a HACCP system.
HACCP procedures should be documented.
Documentation and record keeping should be appropriate to the nature and size of the operation.
04/08/23 Gandhi 84
TRAINING
Training of personnel in industry, government and academia in HACCP principles and applications, and increasing awareness of consumers are essential elements for the effective implementation of HACCP.
04/08/23 Gandhi 85
As an aid in developing specific training to support a HACCP plan, working instructions and procedures should be developed which define the tasks of the operating personnel to be stationed at each Critical Control Point.
Cooperation between primary producer, industry, trade groups, consumer organizations, and responsible authorities are of vital importance .
04/08/23 Gandhi 87
04/08/23 Gandhi 88
04/08/23 Gandhi 89
Application of HACCP in Soy foods
Various soy-based foods were prepared with and with out HACCP protocols using the procedures developed at this Center since 1979.
The products were full fat soy flour, medium fat soy flour, soymilk, soy paneer(Tofu), soy bakery products (biscuits& bread), soy nuts, soy sprouts and protein isolates.
04/08/23 Gandhi 90
Materials and Methods
The soybean variety JS 335 was obtained from the Institute Farm.
It was cleaned thoroughly and made free from all the dirt, stubbles and other foreign matter.
04/08/23 Gandhi 91
It was stored in airtight containers till further use.
Different soy based foods were prepared following the methods developed at this center.
04/08/23 Gandhi 92
FAO/WHO (2006) guidelines were used for the preparation of HACCP plans.
AOAC (1990) methods were used for analyzing various chemical constituents and APHA (1984) recommended methods were used for microbiological examination of the products.
04/08/23 Gandhi 93
Full Fat Soy flour
04/08/23 Gandhi 94
Table1.Product description
1. Product name
2. Important product characteristics of end product
3. How the product is to be used
4. Packaging
Full Fat Soy flour
Aw < 0.5;FFA < 1%; Total
microbial counts < 50000/g
Normally fortified with other cereals/millets/pulses at 10-15% level in the preparation of traditional recipes.
Sealed polythene bags/ hermetically sealed metal containers.
04/08/23 Gandhi 95
5. Shelf-life
6. Where the product will be sold
7. Labeling instructions
8. Special distribution control
One month at normal retail shelf temperatures.
Retail, institutions and food service. Could be consumed as a health food.
Required to ensure product safety.
No physical damage, excess humidity or temperature extremes.
04/08/23 Gandhi 96
Table 2.Product ingredients and incoming material
Soybeans
1. Receiving P 5.Storing B P
8. Cleaning P
11. De hulling P
12. Soaking B C
14. Blanching B C
15.Drying B P C
16. Milling B P C
P=physical; B=biological; C=chemical
Packaging material2.Receiving P
6.Storing B C P
9.Inspecting B P
17.Filling C P 18.Weighing B 19.Closing/sealing B 20.Inspecting B P
21. Labeling B
22. Storing B
23.Transport B
Dry ingredients
3. Receiving P
7. Storing B C P
10. Dumping
Water
4. In taking
13. Chlorinating
04/08/23 Gandhi 97
Table 3.Unaddressed Hazards:
Unaddressed hazard
Soybeans could contain pesticide residues
Identified methods of addressing the hazard
Up stream (farm level) programs such as
A: Training persons who apply pesticides.
B: Purchasing registered pesticides for growers.
C: Auditing growers application of pesticides and records there of.
D: Requiring periodic pesticide residual analysis reports.
04/08/23 Gandhi 98
Table 4.HACCP Plan
Process step
De hulling
Hazard description
Inefficient de hulling may cause the contamination of the product with the microorganisms.
Critical limits
Less than 0.1%
Monitoring procedure
On line check of the sample
Deviation procedures
Line operator to adjust the clearance of the de huller drums.
HACCP records
Operator log book
04/08/23 Gandhi 99
Process step
Blanching/
cooking
Hazard description
In adequate heat treatment
Critical limits
Cook the splits as specified in the scheduled process (under pressure/open vessel boiling)
Monitoring procedure
Check the quality of splits for urease test
Deviation procedures
Operator should adjust the time and temperature as per the authorized contingency plan and to inform the QC.
HACCP records
Operator logbook.
04/08/23 Gandhi 100
Process step
Drying (Sun/mechanical)
Hazard description
Improper drying
Critical limits
The moisture content should be less than 8%-10%.
Monitoring procedure
Check the moisture content as per the guidelines.
Deviation procedures
If moisture content is greater the splits may be dried again and inform QC
HACCP records
Operators log book.
04/08/23 Gandhi 101
Process step
Packaging and sealing
Hazard description
Over filling, improper gauge polythene and improper sealing
Critical limits
Max fill weight as specified in the scheduled process. Proper sealing leaving recommended space.
Monitoring procedure
On line check to reject over and under filled bags and improperly sealed bags.
Deviation procedures
Line operator to adjust the settings.
HACCP records
Operators log book and quality control report.
04/08/23 Gandhi 102
Table 5.HACCP for general activities:
Stage
Raw material harvest
Raw material transport
Raw material inspection
Preparation of seeds
Activity
Liaison with the farmers for unit operations like harvesting, threshing and winnowing.
Transport in sacks to drying area
Sampling and routine inspection.
Cleaning, grading, dehulling, conditioning and blending.
Control activity
Specifications of grain quality are required. Rejection of under sized seeds.
Correct sacking and handling.
Correct sampling methods, training and inspection methods.
Training operators for equipment, preventing insect infestations, check for moisture content.
04/08/23 Gandhi 103
Stage
Milling and sieving, and dehulling
Packaging
Activity
Separation of components of seeds
Filling in to containers and sealing.
Control activity
Training in hygiene, implementation of cleaning, and assessment of product quality.
Establish specifications for labels and fill weights.
04/08/23 Gandhi 104
Implementation of HACCP
Receiving soybeans (CCP-1): Soybeans must come from approved dealers. At the time of its receipt it must be accompanied with its complete quality certificate and microbiological assessment reports.
04/08/23 Gandhi 105
The certificates should indicate the moisture content of the beans, degree of foreign materials and the microorganisms present (number of colonies), insects etc as compared to the upper approved standards of BIS/ISO.
04/08/23 Gandhi 106
At the time of receipt, visual control of soybeans must be carried out to find out the contaminants if any. Further more the proximate composition of the beans must be established with reference to its macro and micronutrients. Defective beans mean that the soy flour will be most likely unsafe for the consumption.
04/08/23 Gandhi 107
Storage of soybeans in silos (CCP-4): The temperature (<20oC) and the relative humidity (<65%) during the storage must be low. They should be recorded at regular intervals. If any deviation from the safer limits, must be immediately rectified. When soybean is stored for a long period, microbiological analysis should be carried out.
04/08/23 Gandhi 108
Receiving secondary materials (greasing, detergents, insecticides, pesticides and sacs) (CCP-2): These materials must be procured from the approved suppliers with quality certificates. These materials must be suitable for using them with food items.
04/08/23 Gandhi 109
No contamination must come from the packaging materials. If these materials do not comply with the standard specifications, must be returned to the suppliers and a new order should be placed with other suppliers.
04/08/23 Gandhi 110
Storage of secondary materials (CCP-3): The temperature and relative humidity during storage must be below 20oC and 65% respectively. The place should be air-conditioned.
04/08/23 Gandhi 111
The temperature and RH should be continuously recorded and corrective actions must be undertaken whenever any deviation occurs.
04/08/23 Gandhi 112
Application of anti insect methods (CCP-5): Any chemicals used during storage along with the soybeans should comply with the safety legislations. The quantity should be with in the prescribed concentrations.
04/08/23 Gandhi 113
Cleaning & grading of soybeans (CCP-6): All the physical contaminants should be removed. They should be graded. Only sound soybeans should be taken for processing.
04/08/23 Gandhi 114
Removal of stones: The stones, metals and dust must be removed from the soybeans so that the final product will comply the quality standards as prescribed by BIS/ISO.
Weighing: The soybeans are weighed and passed through a magnetic system so that the magnetic materials are removed.
04/08/23 Gandhi 115
De hulling (CCP-7)Inefficient de hulling may cause the contamination of the product with the microorganisms. Less than 0.1% hulls are allowed. Hence an efficient dehulling should be used in order to prevent the contamination with the microorganisms.
04/08/23 Gandhi 116
Blanching/cooking (CCP 8)
In adequate heat treatment results in the poor quality of the product. Cook the splits as specified in the scheduled process (under pressure/open vessel boiling) to minimize the anti nutritional factors. Check the quality of splits for urease test.
04/08/23 Gandhi 117
Drying (Sun/mechanical)(CCP 9)
Improper drying will result in the poor quality product. Hence proper drying methods are to be adopted for reducing the moisture content to the safe level( 8-10%).
04/08/23 Gandhi 118
Milling (CCP-10): The grinding is done in a burr/hammer mill. The clearance between the burrs should be adjusted so that the flour must be having particle size <140 micrometers. Similarly with the hammer mill, the sieve below the grinding system must allow flour particles less than 140 micrometers.
04/08/23 Gandhi 119
The sieves should be of SS. The temperature during grinding should not rise too much, which affects the quality of the flourNormally a temperature rise of less than 5oC is desirable. So arrangements must be made to maintain the temperature while grinding.
04/08/23 Gandhi 120
Packaging (CCP-11): During packaging the flour can possibly be contaminated with the microorganisms causing quality deterioration. Hermetic sealing and upright position of the packaging material can avoid this deterioration.
04/08/23 Gandhi 121
There should not be any migration of the low molecular weight substances from the packages. Further more contamination can take place from foreign materials like insects and rodents that accidentally happen to be packed with the flour. The personnel should comply with the GMPs.
04/08/23 Gandhi 122
Storage of full fat flour (CCP-12): Both the temperature and relative humidity must be below 20oC and 65% respectively. They should be recorded and corrective actions must be taken when deviating. When the flour is stored for a long period, microbiological analysis is required.
04/08/23 Gandhi 123
Metal detector (CCP-13): The packed product passes through a metal detector. The product is then checked for its weight and placed in boxes (secondary packaging). The boxes are placed on the pallets and the packets are wrapped with film.
04/08/23 Gandhi 124
Table 6.Quality Standard Expected
Composition:
Protein:
Fat:
Crude Fiber:
Ash:
Moisture:
Physical parameters:
Granulation:
a minimum of 35%
a minimum of 18%
a maximum of 4%
a maximum of 6.5%
a maximum of 10%
90% minimum pass thru US sieve 200(0.074 mm)
04/08/23 Gandhi 125
Microbiology:
Total plate count:
Total coli forms:
Salmonella:
E.coli:
Staphylococcus:
Yeast:
Mold:
20,000/g max
100/10g max
Negative/100g
Negative/100g
100/10g max
100/10g max
100/10g max.
04/08/23 Gandhi 126
Protein solubility:
TI:
Urease activity:
Available lysine:
PDI 20-80%
less than 75% of original.
Nil
Min 5.5g/6g N
04/08/23 Gandhi 127
Sensory parameters:
Color:
Odor:
Taste:
Defects:
Insect parts:
Foreign material:
Black specks:.
Creamy to yellow
Less beany
Nutty
Total absence.
Total absence
Total absence
04/08/23 Gandhi 128
Table 7. Quality assessment of the Full Fat Soy Flour
Quality standard expected
Composition:
Protein: a minimum of 35%
Fat: a minimum of 18%
Crude Fiber:a maximum of 4%
Ash: a maximum of 6.5%
Moisture: a maximum of 10%
Physical parameters:
Granulation: 90% minimum pass thru US sieve 200(0.074 mm)
.
With out HACCP
35%
17%
5.2%
5.4%
10%
75%
With HACCP
40%
20%
3.8%
6.3%
8%
95%
04/08/23 Gandhi 129
Quality standard expected
Microbiology:
Total plate count: 20,000/g max
Total coli forms: 100/10g max
Salmonella: Negative/100g
E.coli Negative/100g
Staphylococcus: 100/10g max
Yeast: 100/10g max
Mold: 100/10g max.
With out HACCP
50,000/g
120/10g
10/100g
15/100g
135/10g
123/10g
110/10g
With HACCP
10,000/g
Nil
Nil
Nil
Nil
Nil
Nil
04/08/23 Gandhi 130
Quality standard expected
Protein solubility:PDI 20-80%
TI: less than 75% of original.
Urease activity: Nil
Available lysine: Min 5.5g/6g N
With out HACCP
25%
50%
Nil
4.2g/6gN
With HACCP
75%
80%
Nil
6.2g/6gN
04/08/23 Gandhi 131
Quality standard expected
Sensory parameters:
Color: Creamy to yellow
Odor: Less beany
Taste: Nutty
Defects:
Insect parts: Total absence.
Foreign material: Total absence.
With out HACCP
Yellow
Beany
Nutty
Absent
Absent
With HACCP
Creamy
Less beany
Nutty
Absent
Absent
04/08/23 Gandhi 132
Conclusion/Output:HACCP procedures were developed for making soy based foods (Full Fat Soy flour,Medium Fat Soy Flour,Soy Milk, Soy Paneer, Soy Bakery Products, Soy Nuts, Soy Sprouts and Soy Protein Isolates) with utmost quality and safe for use.
A proactive approach was suggested to controlling the hazards through out the supply chain of soy based foods production.
04/08/23 Gandhi 133
More flexibility in addressing identified hazards is given in the proposed HACCP program, which permits the soy food processors to select the appropriate and economical methods of control.
Quality control managers are responsible for the design and maintenance of the suggested protocols with government agencies auditing compliance.
04/08/23 Gandhi 134
Summary Table:
Develop HACCP procedures for the production of different soy based foods- Accomplished.
Test the developed procedures with a few soy-based foods such as full fat soy flour, soy milk, soy paneer (tofu), soy nuts and soy sprouts.-Evaluated.
Document the developed procedures and final report writing- Documented.
04/08/23 Gandhi 135
Approximate expenditure incurred in the project (Rs): 3, 10,000.
04/08/23 Gandhi 136
Recommendations:
The HACCP procedures developed may be used for the production of different soy based foods with Good Manufacturing Processes and Good Food Hygiene Practices recommended by the Codex Alimanatarius Commission/FAO for maintaining the safety and quality of the products.
04/08/23 Gandhi 137
Acknowledgments:
Gratefully acknowledges the cooperation received from the Director, CIAE; Project Director and staff of SPU Center and every one of you in accomplishing the project and also during my entire service period(1979-2009) in general.
04/08/23 Gandhi 138
Papers Published
i. Gandhi, A.P. (2008) Development of HACCP procedure for the production of Full fat Soy Flour, International Food Research Journal 15(2), 141-154.
ii. Gandhi, A.P. (2008). Production of Soy Nuts using the Hazard Analysis Critical Control Point (HACCP). Asian journal of Food and Agro industry, 1 (3),137-154.
iii. Gandhi, A.P. (2009). Quality of Soybean and its food products-a review. International Food Research Journal,16(01),11-19.
iv. Gandhi, A.P. (2009). Development of HACCP protocols for the production of soy milk, Accepted for publication in Asian journal of Food and Agro industry .
Papers presented
Gandhi, A.P (2008) Development of HACCP protocols for the production of soy milk, presented in the ISPUC, held at CIAE, Bhopal, December 10-14,2008.
Gandhi, A.P (2008) Use of Hazard Analysis Critical Control Point Principles in Quality Control of Soy Foods(Theme paper) presented in the ISPUC, held at CIAE, Bhopal, December 10-14,2008.
04/08/23 Gandhi 139
THANK YOU
Top Related