TURBO 7 WIRELESS GATEWAY WITH VOICE (3G10WVT)
USER GUIDE
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE�
THAnk YOU fOR pURCHASI nG A TELSTRA TURBO 7 WIRELESS G ATEWAY WITH VOICE
P R E fA c EThe purpose of this manual is to provide you with detailed information on the installation, operation and application of your Turbo 7 Wireless Gateway with Voice
I m PO RTA n T n OT I c E A n D S A f E T Y P R E c AU T I O n• Beforeservicingordisassemblingthisequipment,alwaysdisconnectpowerfromthedevice.
• Useanappropriatepowersupply,preferablythesuppliedpoweradapter,withanoutputofDC12V1.5A.
• Donotoperatethedevicenearflammablegasorfumes.Turnoffthedevicewhenyouarenearapetrolstation,fueldepotorchemicalplant/depot.Operationofsuchequipmentinpotentiallyexplosiveatmospherescanrepresentasafetyhazard.
• Thedeviceandantennashallbeusedonlywithaminimumof20cmfromthehumanbody.
• Theoperationofthisdevicemayaffectmedicalelectronicdevices,suchashearingaidsandpacemakers.
• TheAntennasmustbeconnectedtothisproductpriortoconnectingthetelephonecord.
• ThetelephonecordmustbedisconnectedpriortodisconnectingtheAntennas.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 3
TABLE Of COnTEnTS
1 – Introduction .................................................................................................................... 61.1 features............................................................................................................................................ 71.2 PackageContents............................................................................................................................. 71.3 LED Indicators................................................................................................................................... 81.4 Rear Panel......................................................................................................................................... 9
2 – Quick Setup ................................................................................................................... 112.1 Setup procedure .............................................................................................................................................. 11
3 – Web user Interface ......................................................................................................... 133.1 DefaultSettings.............................................................................................................................. 133.2 TransmissionControlProtocol/InternetProtocol(TCP/IP)Settings............................................... 143.3 LoginProcedure.............................................................................................................................. 183.4 WebUserInterfaceHomepage....................................................................................................... 19
4 – Next G™ Settings ............................................................................................................ 224.1 NextG™ServiceSetup.................................................................................................................... ��
4.1.1 Profile Setup........................................................................................................................ �34.2 PINConfiguration........................................................................................................................... 24
4.2.1 PIn code Protection............................................................................................................ 244.2.2 PINCodeChange................................................................................................................. �6
5 – Wireless ......................................................................................................................... 285.1 Setup.............................................................................................................................................. �95.2 Security.......................................................................................................................................... 305.3 Configuration................................................................................................................................. 3�5.4 media Access control (mAc) filter.................................................................................................. 355.5 WirelessBridge............................................................................................................................... 365.6 Station Info..................................................................................................................................... 37
6 – Management ................................................................................................................. 396.1 DeviceSettings............................................................................................................................... 39
6.1.1 BackupSettings.................................................................................................................. 396.1.2 UpdateSettings.................................................................................................................. 406.1.3 Restore Default................................................................................................................... 406.1.4 Update firmware................................................................................................................ 41
6.2 Access control................................................................................................................................ 426.2.1 Services............................................................................................................................... 426.2.2 IP Addresses........................................................................................................................ 436.2.3 Passwords........................................................................................................................... 44
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE4
6.3 ConfigureSNMPagenton3G10WVT............................................................................................. 456.4 Simple network Time Protocol (SnTP)........................................................................................... 466.5 Save and Reboot............................................................................................................................. 46
7 – Advanced setup ............................................................................................................. 487.1 Local Area network (LAn)............................................................................................................... 487.2 network Address Translation (nAT)............................................................................................... 50
7.2.1 PortForwarding.................................................................................................................. 507.2.2 PortTriggering.................................................................................................................... 527.2.3 Demilitarized Zone (DmZ) Host.......................................................................................... 537.3 Security............................................................................................................................... 547.3.1 IPFiltering........................................................................................................................... 547.3.2 Parental control.................................................................................................................. 56
7.4 Routing........................................................................................................................................... 577.4.1 Default Gateway................................................................................................................. 577.4.2 Static Route......................................................................................................................... 587.4.3 Dynamic Route................................................................................................................... 59
7.5 Domain name System (DnS)......................................................................................................... 597.5.1 Domain name System (DnS) Server................................................................................... 597.5.2 Dynamic Domain name System (Dynamic DnS)............................................................... 60
8 – Voice ............................................................................................................................. 628.1Configuringyour3G10WVTforplacingVoiceCalls......................................................................... 6�
9 – Status ............................................................................................................................ 649.1 Diagnostics..................................................................................................................................... 659.2 SystemLog..................................................................................................................................... 679.3 NextG™Status............................................................................................................................... 699.4 Statistics......................................................................................................................................... 7�
9.4.1 LAn Statistics...................................................................................................................... 7�9.4.2 NextG™Statistics............................................................................................................... 73
9.5 Route.............................................................................................................................................. 749.6 Address Resolution Protocol (ARP)................................................................................................. 759.7 DynamicHostConfigurationProtocol(DHCP)............................................................................... 759.7 PInG................................................................................................................................................ 76
Appendix A: Print Server ...................................................................................................... 78
Appendix B: USB Storage ..................................................................................................... 89
Appendix C: Command Line Interface (CLI) Commands Via Telnet ......................................... 92
I n T RO D U c T I O n
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE6
InTRODUCTIO n
Withtheincreasingpopularityofthe3Gstandardworldwide,theTelstraTurbo7WirelessGatewaywithVoiceprovidesyouwithtriple-bandcoveragethroughexpandingcellularnetworksthroughouttheworld.
Byfollowingthesimplestep-by-stepinstructionsfoundontheConnectionManagerUSBkey,youcanshareyourconnectionwithmultiplewirelessandwireddevicesusingtheNextG™network.
The Gateway also provides state-of-the-art security features such as Wi-fi Protected Access (WPA) dataencryption,FirewallandVirtualPrivateNetworks(VPN)passthrough.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 7
1.1 FeATUReS• TheTelstraTurbo7WirelessGatewaywithVoiceallowsyoutoshareyourNextG™
connection with multiple wireless or wired devices
• Providesyouwithworldwidecoveragethroughtriple-bandHSUPA/HSDPA/UMTS(850/1900/2100MHz),quad-bandeDGe/GSM(850/900/1800/1900MHz)
• embeddedmulti-modeHSUPA/HSDPA/UMTS/eDGe/GPRS/GSMmodule
• 1xRJ11portforvoicecallingovertheNextG™networkviaaconnectedstandardAnalogueTelephone(notincluded).
• Built-inUSB2.0PrintServerfunctionality
• SupportforUSB2.0MassStoragedevice(NTFS,FAT32)
• Integrated802.11g/54MbpsAP(backwardcompatiblewith802.11b)
• Wi-FiProtectedAccess(WPA)/Wi-FiProtectedAccess2(WPA2)and802.1xwirelessencryption
• Staticroute/RoutingInformationProtocol(RIP)/RIPv2routingfunctions
• MediaAccessControl(MAC)addressandIPfiltering
• NetworkAddressTranslation(NAT)/PortAddressTranslation(PAT)
• SupportsUniversalPlugandPlay(UPnP)andInternetGroupManagementProtocol(IGMP)snooping
• SupportsVirtualPrivateNetwork(VPN)Pass-Through
• DynamicHostConfigurationProtocol(DHCP)Server/Relay/Client
• DomainNameSystem(DNS)ProxyandDynamicDomainNameSystem(DDNS)
• Web-basedManagement
• CommandLineInterface(CLI)viaTelnet
• Configurationbackupandrestoration
• Remoteconfiguration
• GatewayandNextG™modulefirmwareupgrade
• Supportshalf-bridgingmode
• SupportsSimpleNetworkManagementProtocol(SNMP)
1 .2 PACkAGeCONTeNTSYourpackagecontainsthefollowing:
• TelstraTurbo7WirelessGatewaywithVoice
• PrintedQuickStartGuide
• USBkey(ContainingTelstraConnectionManagerandUserGuide)
• ethernetCable
• SecurityCard
• 2x3GAntennas
• 1xWi-FiAntenna
• PowerSupply
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE8
1.3 LeD INDICATORSThe LED indicators are shown in this illustration and followed by detailed explanations in the tablebelow.
LED Icon Color Mode Description
POWER Blue On Power on
Off Power off
Phone Blue On Phone line active
Off Phone line inactive or not connected
LAN 1~2 Blue On Powered device connected to the associated port (includes devices with wake-on-LANcapabilitywhereaslightvoltageissuppliedtoanethernetconnection)
Off no activity, modem powered off, no cable or no powered device connected to the associated port
Blink LAn activity present (traffic in either direction)
Wi-Fi Blue On LocalWi-FiaccesstotheGatewayisenabledandworking
Off Local Wi-fi access to the Gateway is disabled
Blink DatabeingtransmittedorreceivedoverWi-Fi.
Internet Blue Blink DataistransmittedthroughInternetconnection
Off Noconnectiontotheinternetorgatewaypoweredoff
On Internet connection established
3G Blue On connection established with 3G network
Blink Connectingwith3Gnetwork
Off NoconnectionwithUMTScellularstation,noactivity,gatewaypoweredoff.
2G Blue On connection established with �G network
Blink ConnectingtoaneDGe,GPRSorGSMcellularstation
Off no connection with EDGE, GPRS or GSm cellular station, no activity or gatewaypoweredoff.
Low Blue On Lowsignalstrength
Off Noactivity,gatewaypoweredofforonothersignalstrength
Med Blue On Mediumsignalstrength
Off Noactivity,gatewaypoweredofforonothersignalstrength
High Blue On Highsignalstrength
Off Noactivity,gatewaypoweredofforonothersignalstrengthnOTE: The six LEDs on the left side of the top panel display (Low, Med, High, Internet, 3G, 2G) will cycle on and off if pIn
code protection is activated. In this case, you should consult section 4.2.1 pIn Code protection (page 21) for further instructions.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 9
1.4 ReARPANeLTherearpanelcontainstheportsfordataandpowerconnections.
(1) PowerjackforDCpowerinput(12VDC/1.5A)/Powerbutton
(�) USIm card slot
(3) USBPort(ForconnectingaUSBPrinterorUSBStorageDevice)
(4) Resetbutton
(5) PhonePort(forVoicecallsovertheNextG™Network)
(6) 2RJ-45ethernetLANports
1 2 3 4 5 6 871 2 3 4 5 6 871 2 3 4 5 6 871 2 3 4 5 6 871 2 3 4 5 6 871 2 3 4 5 6 87
QUICkSeTUP
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 11
QUICk SETU p
2.1 SeTUPPROCeDURe (WITHOUTUSBkeY )ThesestepsexplainhowtoquicklysetupyourNextG™Gateway:
1: Attachthetwo3GantennasprovidedtotheportsmarkedMAIN3GandAUX3Gonthefrontofthegateway.Theantennasshouldbescrewedinaclockwisedirection.
2: AttachtheWi-FiantennaprovidedtotheportmarkedWI-FIonthefrontoftheGateway.Theantennashouldbescrewedinaclockwisedirection.
3: InsertyourSIMcard(untilyouhearaclick)intotheUSIMslotontherearoftheGateway.
4: ConnecttheyellowethernetcabletooneoftheyellowLANportsfoundatthebackoftheGateway.
5: Connecttheotherendoftheyellownetworkingcabletotheethernetportonyourcomputer.
6: Ifrequired,connectastandardAnalogueTelephone(notincluded)totheportlabeled“Phone”usingastandardtelephonecable(notincluded).
7: ConnectthepoweradaptertothePowersocketonthebackoftheGateway.
8: PlugthepoweradapterintoawallsocketandpressthepowerbuttonintotheONposition(depressed).
9: ConfiguretheGatewaythroughtheWebUserInterface(WUI).NOTe: Chapters3through8explainhowtosetupandusetheWUI
10: SavetheGatewayconfigurationandreboot(seesection6.5).
W E B US E R I n T E R fA c E
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 13
WEB USER In TER fACE
ThissectiondescribeshowtoaccessthedeviceviathewebuserinterfaceusingawebbrowsersuchasMicrosoftInternetexplorer(version5.0orlater),MozillaFirefoxorSafari.
3 .1 DeFAULTSeTTINGSThefollowingarethedefaultsettingsfortheGateway
• Local(LAN)access(username:admin,password:admin)
• Remote(WAN)access(username:support,password:support)
• Useraccess(username:user,password:user)
• LANIPaddress:10.0.0.138
• RemoteWANaccess:disabled
• NATandfirewall:enabled
• DynamicHostConfigurationProtocol(DHCP)serveronLANinterface:enabledTechnicalNote:
Duringpoweron,thedeviceinitializesallsettingstodefaultvalues.Itwillthenreadtheconfigurationprofilefromthepermanentstoragesectionofflashmemory.Thedefaultattributesareoverwrittenwhenidenticalattributeswithdifferentvaluesareconfigured.Theconfigurationprofileinpermanentstoragecanbecreatedviathewebuserinterfaceortelnetuserinterface,orothermanagementprotocols.ThefactorydefaultconfigurationcanberestoredeitherbypushingtheresetbuttonformorethanfivesecondsuntilthepowerLeDblinksorbyclickingtheRestoreDefaultConfigurationoptionintheRestoreDefaultSettingsscreen(seesection6.1.3).
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE14
3 .2 TCP/ IP SeTTINGSItislikelythatyourcomputerwillautomaticallyobtainanIPAddressandjointhenetwork.ThisisbecausetheDynamicHostConfigurationProtocol(DHCP)server(onthedevice)willstartautomaticallywhenyourGatewaypowersup.
ThisautomaticassignmentrequiresthatDHCPisconfiguredonyourcomputers.Itislikelythatthisisalreadythecase,butshouldyouberequiredtoconfigurethis,pleaseseetheinstructionsbelow.
WINDOWSXPDHCP Mode
To set your Pc for DHcP mode, check the Internet Protocol properties of your Local Area Connection.YoucansetyourPCtoDHCPmodebyselectingObtainanIPaddressautomaticallyinthedialogboxshownbelow.
STATIC IP Mode
ThefollowingstepsshowhowtoconfigureyourPCIPaddressusingsubnet10.0.0.x.ThefollowingassumesyouarerunningWindowsXP.
1: FromtheNetworkConnectionswindow,openLocalAreaConnection(Youmayalsoaccessthisscreenbydouble-clickingtheLocalAreaConnectionicononyourtaskbar).ClickthePropertiesbutton.
2: SelectInternetProtocol(TCP/IP)andclickthePropertiesbutton.Thescreenshouldnowdisplayasbelow.ChangetheIPaddresstothedomainof10.0.0.x.(1<x<254)withsubnetmaskof255.255.255.0.SetthedefaultgatewayandDNSservertothegateway’sIPaddress.
nOTE: The Ip address of the gateway is 10.0.0.138. (default), so the pC must be set with a different Ip. In the case below, the PC’s IP address is set as 10.0.0.1
3: ClickOktosubmitthesettings.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 15
MACOSX10.4DHCP Mode
TosetyourAppleMacforDHCPmode,browsetotheApplemenuandselectSystemPreferences.IntheSystemPreferencesmenu,clickontheNetworkiconandselectethernet.NextselectUsingDHCPfromtheConfiguredropdownlist.AfterclickingApply,yourMac’sIPAddresswillnowbeautomaticallyassignedfromtheGateway.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE16
STATIC Mode
IfyoudonotwishtouseautomaticassignmentofIPAddressesandwishtoconfigureyourGatewaymanually,yourcomputermusthaveastaticIPaddresswithintheGateway’ssubnet.Thefollowingstepsshowhowtoconfigureyourcomputer’sIPaddresswithinthesubnet10.0.0.x
1. BrowsetotheApplemenuandselectSystemPreferences.FromtheSystemPreferences,clicktheNetworkiconandselecttheethernetconnection.
2. FromtheConfiguredropdownlist,youcansetyourcomputertoStaticIPmodebyselectingtheManuallyoption.
3. ChooseanIPaddressbetween10.0.0.1–10.0.0.254(DonotchoosetheGatewayIPof10.0.0.138).enterthisIPaddressintothefieldmarkedIPAddress,andenteraSubnetMaskof255.255.255.0
4. SettheRouterandDNSserverfieldto10.0.0.138(Thegateway’sIPaddress).
NOTe: TheIPaddressofthegatewayis10.0.0.138.(default),sothecomputermustbesetwithadifferentIPtothegateway.Inthecasebelow,thePC’sIPaddressissetas10.0.0.1
5. ClickApplytosubmitthesettings.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 17
W I n D OW S V I STADHCP Mode
TosetyourPCforDHCPmode,clickpropertiesofyourLocalAreaConnection.YoucansetyourPCtoDHCPmodebyselectingObtainanIPaddressautomaticallyinthedialogboxshownbelow.
STATIC IP Mode
ToconfigureyourGatewaymanually,yourPCmusthaveastaticIPaddresswithintheGateway’ssubnet.ThefollowingstepsshowhowtoconfigureyourPCIPaddressusingsubnet10.0.0.x.ThefollowingassumesyouarerunningWindowsVista.
1: FromtheNetworkConnectionswindow,openLocalAreaConnection(Youmayalsoaccessthisscreenbydouble-clickingtheLocalAreaConnectionicononyourtaskbar).ClickthePropertiesbutton.
2: SelectInternetProtocol(TCP/IPv4)andclickthePropertiesbutton.Thescreenshouldnowdisplayasbelow.ChooseanIPaddressbetween10.0.0.1–10.0.0.254
nOTE: The Ip address of the gateway is 10.0.0.138. (default), so the pC must be set with a different Ip. In the case below, the PC’s IP address is set as 10.0.0.1
3: SettheRouterandDNSserverfieldto10.0.0.138(Thegateway’sIPaddress).
3. ClickOktoapplythesettings.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE18
3.3 LOGINPROCeDUReTologintothewebinterface,followthestepsbelow:
NOTe: Thedefaultsettingscanbefoundin3.1DefaultSettings.
1: OpenawebbrowserandenterthedefaultIPaddressfortheGatewayintheWebaddressfield.Inthiscasehttp://10.0.0.138
NOTe: Forremoteaccess,usetheWANIPaddressshownontheWUIHomepagescreenandloginwithremoteusernameandpassword.
2: Adialogboxwillappear,asillustratedbelow.enterthedefaultusernameandpassword,asdefinedinsection3.1DefaultSettings.
ClickOktocontinue.
NOTe: Theloginpasswordcanbechangedlater(see6.2.3Passwords)
3: Aftersuccessfullylogginginforthefirsttime,youwillreachthisscreen.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 19
3.4 WeBUSeR INTeRFACeHOMePAGeThe web user interface (WUI) is divided into two window panels, the main menu (on the top) and thedisplayscreen(onthebottom).Themainmenuhasthefollowingoptions:Basic,NextG™Settings,Wireless,Management,AdvancedandStatus.
Selectingoneoftheseoptionswillopenasubmenuwithmoreoptions.Basicisdiscussedbelowwhilesubsequentchaptersintroducetheothermainmenuselections.
NOTe: Themenuoptionsavailablewithinthewebuserinterfacearebaseduponthedeviceconfigurationanduserprivileges(i.e.localorremote).
BASIC / HOME
TheBasic/HomescreenistheWUIhomepageandthefirstselectiononthemainmenu.Itprovidesinformationregardingthefirmware,3G,andIPconfiguration.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE�0
Thefollowingtableprovidesfurtherdetails.
Fields Description
Software version Thesoftwareversionofthedevice.
Hardware version The Hardware version of the device
Bootloader version
Thebootloaderversionofthedevice.
Wireless driver version
Thewirelessdriverversionofthewirelessmodule.
Network Thenameoforotherreferencetothemobilenetworkoperator.
Link ShowstheconnectionstatusofthecurrentNextG™connection.
Mode Theradioaccesstechniquecurrentlyusedtoenableinternetaccess.ItcanbeHSUPA,HSDPA,UMTS,eDGe,GPRSorDisconnected.
Signal strength Themobilenetwork(UMTSorGSM)signalqualityavailableatthedevicelocation.Thissignalqualityaffectstheperformanceoftheunit.Iftwoormorebarsaregreen,theconnectionisusuallyacceptable.
SIM info ShowstheSIMcardstatusonthedevice.
LAN IP Address ShowstheIPaddressforLANinterface.
WAN IP Address ShowstheIPaddressforWANinterface.
Default Gateway ShowstheIPaddressofthedefaultgatewayfortheWANinterface.
Primary DNS Server
ShowstheIPaddressoftheprimaryDNSserver.
Secondary DNS server
ShowstheIPaddressofthesecondaryDNSserver.
Date/Time Thetimeaccordingtothedevice’sinternalclock
NeXTGT m S E T T I n G S
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE��
Next G™ Set t INGS
ThismenuincludesNextG™serviceSetupandPINConfiguration.
NOTe: Sections9.3and9.4.2alsoprovideinformationabouttheNextG™service.
4 .1 NeXTG™SeRVICe SeTUPSelectyourNextG™servicesettingsaccordingtopredefinedorcustomprofiles. Setupinstructionsareprovidedinthefollowingsectionsforyourassistance.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE �3
4.1.1 Profile Setup
Telstrawillprovidetheinformationrequiredtocompletethefirsttimesetupinstructionsbelow.Thisincludesprofile,usernameandpassword.Onlycompletethosestepsforwhichyouhaveinformationandskiptheothers.
1. IfyourSIMcardisnotinsertedintothegateway,pleaseturnthegatewayoff.TheninserttheSIMandturnthegatewayon.
2.TypetheAPNintheAPNfield.AuthenticationMethodshouldbeprovidedbyTelstra;orjustleaveitAUTOifnotacquired.Ifyouhavenotreceivedtheusernameandpassword,leavethesefieldsempty.
3. SelectIPcompressionandDatacompressiontobeONorOff.Bydefaulttheyaresettooff.
4. ClicktheSavebuttontosavethenewsettings.
5. PresstheConnectbuttontoconnecttoInternet.TheDeviceInfofor3GnetworkboxintheWUIBasicscreenshouldindicateanactiveconnection,asshownbelow.The3GandInternetLeDsonthefrontpaneloftheGatewayshouldalsobeblinking.
.
IftheLeDsareoff,theneitheryourprofilesettingsareincorrect,theSIMcardisnotworkingortheservicenetworkisunavailable.Ineithercase,contactTechnicalSupportforfurtherinstructions.
NOTe: IftheLeDslightinanon/offpatternmovingfromlefttorightthisindicatesthatyourSIMisPINLocked,pleaseseePINLockOffonpage24forinstructiononhowtofixthis
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE24
4 .2 P INCONFIGURATIONThisscreenallowsforchangestothe3GSIMcardPINcodeprotectionsettings.
NOTe: IfyouhaveenteredtheincorrectPIN3times,yourSIMcardwillbelockedforyoursecurity.PleasecallTelstraforassistance.
4.2.1 PIN Code Protection
PINcodeprotectionpreventstheuseofaSIMcardbyunauthorizedpersons.Tousethe3Ginternetservicewiththisgatewayhowever,thePINcodeprotectionmustbedisabled.IftheSIMcard inserted into the Gateway is locked with a PIn code, the web user interface will display the followingscreenafterlogin.
PIN Lock Off
IfyouwishtoconnecttotheInternetusingaPINlockedSIMcard,youmustfirstturnPINcodeprotectionOff.SelectPINlockOff,enterthePINCodetwice.Pleasekeepinmindyouonlyhave3attemptsbeforeyourSIMcardislocked.Theremainingattempts’numbershowshowmanyattemptsleft.ContactTelstraifyourequireassistance.YoucanselectRememberPINCodetoONsoyoudon’tneedtoinputthePINcodeeverytimewhenthegatewayturnson.Afterwards,clickApply.Thefollowingdialogboxshouldnowappear.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 25
PIN Lock On
AfteryouarefinishedusingyourSIMcardforInternetservice,youmaywishtolockitagain.Inthiscase,firstgotothe3GSettings-PINConfigurationscreen,asshownbelow.SelectPINlockON,enterthePINcodetwice.YoucanselectRememberPINcodetoYessoyoudon’tneedtoinputthePINcodeeverytimewhenthegatewayturnson.ThenclickSave.
Afteryoudoso,thefollowingdialogboxshouldappear.
YoucannowreturnyourSIMcardtoyourcellularphoneorothermobiledevice.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE�6
4.2.2 PIN Code Change
IfyouwishtochangeyourPINcodeforgreatersecurity,enablethePINCodeprotection.GototheprevioussectionandfollowtheprocedurelistedunderPINLockOn.
AfterlockingtheSIMcard,selectPIN Code Change and enter your Old and new PIn codes in thefieldsprovided.keepinmindyouonlyhave3attemptsbeforeyourSIMcardislocked.Theremainingattempts’numbershowshowmanyattemptsleft.ContactTelstraifyourequireassistance.Afterwards,clickApplytoactivatethechange.
nOTE: If you forget to change the pIn Code without first turning on pIn lock protection, you will see this dialog box as a helpful reminder.
nOTE: If your pIn Code change request was successful the following dialog box will display.
W I R E L E SS
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE�8
WIRELESS
TheWirelesssubmenuprovidesaccesstoWirelessLocalAreaNetwork(LAN)configurationsettingsincluding:
• Wirelessnetworkname
• Channelrestrictions(basedoncountry)
• Security
• Accesspointorbridgingbehaviour
• Stationinformation
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE �9
5.1 SeTUPThisscreenallowsyoutoconfigurebasicfeaturesofthewirelessLANinterface.Youcanenableor disable the wireless LAn interface, hide the network from active scans, set the wireless networkname(alsoknownasSSID)andrestrictthechannelsetbasedoncountryrequirements.TheWirelessGuestNetworkfunctionaddsextranetworkingsecuritywhenconnectingtoremotehosts.
Option Description
Enable Wireless Acheckboxthatenables(default)ordisablesthewirelessLANinterface.Whenselected,theWebUIdisplaysHideAccesspoint,SSID,BSSIDandCountrysettings.
Hide Access Point
Select Hide Access Point to protect the access point from detection by wireless active scans.TocheckAPstatusinWindowsXP,openNetworkConnectionsfromthestartMenuandselectViewAvailableNetworkConnections.If the access point is hidden, it willnotbelistedthere.Toconnectaclienttoahiddenaccesspoint,thestationmustaddtheaccesspointmanuallytoitswirelessconfiguration.
SSID [1-32 characters]
Setsthewirelessnetworkname.SSIDstandsforServiceSetIdentifier.AllstationsmustbeconfiguredwiththecorrectSSIDtoaccesstheWLAN.IftheSSIDdoesnotmatch,thatuserwillnotbegrantedaccess.
BSSID TheBSSIDisa48bitidentityusedtoidentifyaparticularBSS(BasicServiceSet)withinanarea.InInfrastructureBSSnetworks,theBSSIDistheMAC(MediaAccesscontrol) address of the AP (Access Point) and in Independent BSS or ad hoc networks, theBSSIDisgeneratedrandomly.
Country Adrop-downmenuthatpermitsworldwideandspecificnationalsettings.
Wireless Guest Network
TheGuestSSID(VirtualAccessPoint)canbeenabledbyselectingtheenableWirelessGuestNetworkcheckbox.RenametheWirelessGuestNetworkasyouwish.NOTe:RemotewirelesshostscannotscanGuestSSIDs.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE30
5.2 SeCURITYThisGatewayincludesanumberofoptionstohelpprovideasecureconnectiontotheNextG™Network.
Securityfeaturesinclude:
• WeP/WPA/WPA2dataencryption
• SPIFirewall
• VPNPass-Through
• MACaddressIPfiltering
• Authenticationprotocols–PAP/CHAP
YoucanauthenticateorencryptyourserviceontheWi-FiProtectedAccessalgorithm,whichprovidesprotectionagainstunauthorizedaccesssuchaseavesdropping.
ThefollowingscreenappearswhenSecurityisselected.TheSecuritypageallowsyoutoconfiguresecurityfeaturesofyourGateway’swirelessLANinterface.Youcansetthenetworkauthenticationmethod,selectdataencryption,specifywhetheranetworkkeyisrequiredtoauthenticatetothiswirelessnetworkandspecifytheencryptionstrength.
ClickSave/Applytoconfigurethewirelesssecurityoptions.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 31
Select SSID YourServiceSetIdentifier(SSID),setsyourWirelessNetworkName.YoucanconnectmultipledevicesincludingLaptops,DesktopPCsandPDAstoyourWirelessGateway.Togetadditionaldevicesconnected,scanforanetwork,andlocatetheSSIDshownonyourWirelessSecurityCard.IftheSSIDdoesnotmatch,accessisdenied.
Network Authentication
Thisoptionisusedforauthenticationtothewirelessnetwork.eachauthenticationtypehasitsownsettingsasillustratedbelow.Forexample,selecting802.1XauthenticationwillrevealtheRADIUSServerIPaddress,Portandkeyfields.
WePencryptionwillalsobeenabled.
ThesettingsforWPAauthenticationareshownbelow.
WEP Encryption
Thisoptionindicateswhetherdatasentoverthenetworkisencrypted.Thesamenetworkkeyisusedfordataencryptionandnetworkauthentication.Whilstfournetworkkeyscanbedefined,onlyonecanbeusedatanyonetime.
Usethenetworkkeyfoundinthedropdownlist.
Encryption Strength
Thisdrop-downlistboxwilldisplaywhenWePencryptionisenabled.
Thekeystrengthisproportionaltothenumberofbinarybitscomprisingthekey.
Thismeansthatkeyswithagreaternumberofbitshaveagreaterdegreeofsecurityandareconsiderablymoredifficulttocrack.encryptionstrengthcanbesettoeither64-bitor128-bit.A64-bitkeyisequivalentto5ASCIIcharactersor10hexadecimalnumbers.A128-bitkeycontains13ASCIIcharactersor26hexadecimalnumbers.FYI:eachkeycontainsa24-bitheader(aninitiationvector)whichenablesparalleldecodingofmultiplestreamsofencrypteddata.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE3�
5.3 CONFIGURATIONThefollowingscreenappearswhenyouselectConfiguration.ThisscreenallowsyoutocontrolthefollowingadvancedfeaturesoftheWirelessLocalAreaNetwork(WLAN)interface:
• Selectthechannelwhichyouwishtooperatefrom
• Forcethetransmissionratetoaparticularspeed
• Setthefragmentationthreshold
• SettheRTSthreshold
• Setthewake-upintervalforclientsinpower-savemode
• Setthebeaconintervalfortheaccesspoint
• SetXpressmode
• Programshortorlongpreambles
ClickSave/Applytosettheadvancedwirelessconfiguration.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 33
Option Description
AP Isolation SelectOnorOff.Byenablingthisfeature,wirelessclientsassociatedwiththeAccessPointcanbelinked.
Band ThenewamendmentallowsIeee802.11gunitstofallbacktospeedsof11Mbps,soIeee802.11bandIeee802.11gdevicescancoexistinthesamenetwork.Thetwostandardsapplytothe2.4GHzfrequencyband.Ieee802.11gcreatesdata-rateparityat2.4GHzwiththeIeee802.11astandard,whichhasa54Mbpsrateat5GHz.(Ieee802.11ahasotherdifferencescomparedtoIeee802.11borg,suchasofferingmorechannels.)
Channel Allowsselectionofaspecificchannel(1-14)orAutomode.
Auto Channel Timer (min)
TheAutoChanneltimesthelengthittakestoscaninminutes.
54g Rate In Auto (default) mode, your Gateway uses the maximum data rate and lowers thedataratedependentonthesignalstrength.Theappropriatesettingisdependentonsignalstrength.Otherratesarediscretevaluesbetween1to54Mbps.
Multicast Rate Settingformulticastpackettransmissionrate.(1-54Mbps)
Basic Rate Setsbasictransmissionrate.
Fragmentation Threshold
Athreshold(inbytes)determineswhetherpacketswillbefragmentedandatwhatsize.Packetsthatexceedthefragmentationthresholdofan802.11WLANwillbesplitintosmallerunitssuitableforthecircuitsize.Packetssmallerthanthespecifiedfragmentationthresholdvaluehoweverarenotfragmented.
Valuesbetween256and2346canbeenteredbutshouldremainatadefaultsettingof2346.SettingtheFragmentationThresholdtoolowmayresultinpoorperformance.
RTS Threshold RequestToSend(RTS)specifiesthepacketsizethatexceedsthespecifiedRTSthreshold,whichthentriggerstheRTS/CTSmechanism.SmallerpacketsaresentwithoutusingRTS/CTS.Thedefaultsettingof2347(maxlength)willdisablestheRTSThreshold.
DTIM Interval DeliveryTrafficIndicationMessage(DTIM)isalsoknownasBeaconRate.Theentryrangeisavaluebetween1and65535.ADTIMisacountdownvariablethatinformsclientsofthenextwindowforlisteningtobroadcastandmulticastmessages.WhentheAPhasbufferedbroadcastormulticastmessagesforassociatedclients,itsendsthenextDTIMwithaDTIMIntervalvalue.APClientshearthebeaconsandawakentoreceivethebroadcastandmulticastmessages.Thedefaultis1.
Beacon Interval Theamountoftimebetweenbeacontransmissionsinismilliseconds.Thedefaultis100msandtheacceptablerangeis1–65535.Thebeacontransmissionsidentifythepresenceofanaccesspoint.Bydefault,networkdevicespassivelyscanallRFchannelslisteningforbeaconscomingfromaccesspoints.Beforeastationenterspowersavemode,thestationneedsthebeaconintervaltoknowwhentowakeuptoreceivethebeacon.
Xpress™ Technology
Broadcom’sXpress™Technologyiscompliantwithdraftspecificationsoftwoplannedwirelessindustrystandards.Ithasbeendesignedtoimprovewirelessnetworkefficiency.Defaultisdisabled.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE34
Option Description
54g Mode SelectAutomodeforgreatestcompatibility.SelectPerformancemodeforthefastestperformanceamong54gcertifiedequipment.SelectLRSmodeifyouareexperiencingdifficultywithlegacy802.11bequipment.Ifthisdoesnotwork,youmayalsotry802.11bonlymode.
54g Protection InAutomode,thegatewaywilluseRTS/CTStoimprove802.11gperformanceinmixed802.11g/802.11bnetworks.TurningprotectionOffwillmaximize802.11gthroughputundermostconditions.
Preamble Type Shortpreambleisintendedforapplicationswheremaximumthroughputisdesiredbutitdoesnotworkwithlegacyequipment.Longpreambleworkswiththecurrent1and2Mbit/sDSSSspecificationasdescribedinIeeeStd802.11-1999
Transmit Power Setthepoweroutput(bypercentage)asdesired.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 35
5 .4 MACF ILTeRThisscreenappearswhenMediaAccessControl(MAC)Filterisselected.Thisoptionallowsaccesstoberestrictedbasedupontheunique48-bitMACaddress.
ToaddaMACAddressfilter,clicktheAddbuttonshownbelow.
Todeleteafilter,selectitfromthetablebelowandclicktheRemovebutton.
Option Description
MAC Restrict Mode Disabled–DisablesMACfiltering
Allow–PermitsaccessforthespecifiedMACaddresses.
NOTe: Addawirelessdevice’sMACaddressbeforeclickingtheAllowradiobuttonorelseyouwillneedtoconnecttotheGateway’swebuserinterfaceusingthesuppliedyellowethernetcableandaddthewirelessdevice’sMACaddress.
Deny–RejectsaccessforthespecifiedMACaddresses
MAC Address ListstheMACaddressessubjecttotheMACRestrictMode.TheAddbuttonpromptsanentryfieldthatrequiresyoutypeinaMACaddressinatwo-character,6-byteconvention:xx:xx:xx:xx:xx:xxwherexxarehexadecimalnumbers.Amaximumof60MACaddressescanbeadded.
entertheMACaddressonthescreenbelowandclickSave/Apply.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE36
5.5 WIReLeSSBRIDGeThefollowingscreenappearswhenselectingWirelessBridge,andgoesintoadetailedexplanationofhowtoconfigurewirelessbridgefeaturesofthewirelessLANinterface.
ClickSave/Applytoimplementnewconfigurationsettings.
Feature Options
AP Mode SelectingWirelessBridge(WirelessDistributionSystem)disablesAccessPoint(AP)functionalitywhileselectingAccessPointenablesAPfunctionality.InAccessPointmode,wirelessbridgefunctionalitywillstillbeavailableandwirelessstationswillbeabletoassociatetotheAP.
Bridge Restrict SelectingDisabledinBridgeRestrictdisablesWirelessBridgerestriction,whichmeansthatanywirelessbridgewillbegrantedaccess.Selectingenabledorenabled(Scan)allowswirelessbridgerestriction.OnlythosebridgesselectedinRemoteBridgeswillbegrantedaccess.ClickRefreshtoupdatethestationlistwhenBridgeRestrictisenabled.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 37
5.6 STATION INFOThefollowingscreenappearswhenyouselectStationInfo,andshowsauthenticatedwirelessstationsandtheirstatus.
ClicktheRefreshbuttontoupdatethelistofstationsintheWLAN.
BSSID TheBSSIDisa48-bitidentityusedtoidentifyaparticularBSS(BasicServiceSet)withinanarea.InInfrastructureBSSnetworks,theBSSIDistheMAC(MediaAccessControl)addressoftheAP(AccessPoint);andinIndependentBSSoradhocnetworks,theBSSIDisgeneratedrandomly.
Associated ListsallthestationsthatareassociatedwiththeAccessPoint,alongwiththeamountoftimesincepacketsweretransferredtoandfromeachstation.Ifastationisidlefortoolong,itisremovedfromthislist.
Authorized Liststhosedeviceswithauthorizedaccess.
m A n A G E m E n T
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 39
MAnAGEMEnT
TheManagementmenuhasthefollowingmaintenancefunctionsandprocesses:
6.1DeviceSettings
6.2AccessControl
6.3SimpleNetworkManagementProtocol(SNMP)
6.4SimpleNetworkTimeProtocol(SNTP)
6.5SaveandReboot
6 .1 DeVICe SeTTINGSTheDeviceSettingsscreensallowyoutobackup,retrieveandrestorethedefaultsettingsofyourGateway.ItalsoprovidesafunctionforyoutoupdateyourGateway’ssettings.
6.1.1 Backup Settings
ThefollowingscreenappearswhenBackupisselected.ClicktheBackupSettingsbuttontosavethecurrentconfigurationsettings.
YouwillbepromptedtodefinethelocationofabackupfiletosavetoyourPC.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE40
6.1.2 Update Settings
ThefollowingscreenappearswhenselectingUpdatefromthesubmenu.ByclickingontheBrowsebutton,youcanlocateapreviouslysavedfilenameastheconfigurationbackupfile.ClickontheUpdatesettingstoloadit.
6.1.3 Restore Default
ThefollowingscreenappearswhenselectingRestoreDefault.ByclickingontheRestoreDefaultSettingsbutton,youcanrestoreyourGatewaysdefaultfirmwaresettings.Torestoresystemsettings,rebootyourGateway.
NOTe: Thedefaultsettingscanbefoundinsection3.1DefaultSettings.
OnceyouhaveselectedtheRestoreDefaultSettingsbutton,thefollowingscreenwillappear.Closethewindowandwait2minutesbeforereopeningyourbrowser.Ifrequired,reconfigureyourcomputer’sIPaddresstomatchyournewconfiguration(seesection3.2TCP/IPSettingsfordetails).
Afterasuccessfulreboot,thebrowserwillreturntotheDeviceInfoscreen.Ifthebrowserdoesnotrefreshtothedefaultscreen,closeandrestartthebrowser.
NOTe: TheRestoreDefaultfunctionhasthesameeffectastheresetbutton.Iftheresetbuttoniscontinuouslypushedformorethan5seconds(andnotmorethan12seconds),thebootloaderwillerasetheconfigurationsettingssavedonflashmemory.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 41
6.1.4 Update Firmware
ThefollowingscreenappearswhenselectingUpdateFirmware.Byfollowingthestepsonthisscreen,youcanupdateyourGateway’sfirmware.Manualdeviceupgradesfromalocallystoredfilecanalsobeperformedusingthefollowingscreen.
1: Obtainanupdatedsoftwareimagefile
2: enterthepathandfilenameofthefirmwareimagefileintheSoftwareFileNamefieldorclicktheBrowsebuttontolocatetheimagefile.
3: ClicktheUpdateSoftwarebuttononcetouploadandinstallthefile.NOTe: Theupdateprocesswilltakeabout2minutestocomplete.TheGatewaywillrebootandthebrowserwindowwill
refreshtothedefaultscreenuponsuccessfulinstallation. ItisrecommendedthatyoucomparetheSoftwareVersionatthetopoftheBasicscreen(WUIhomepage)withthefirmwareversioninstalled,toconfirmtheinstallationwassuccessful.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE42
6 .2 ACCeSSCONTROLTheAccessControloptionfoundintheManagementdropdownmenuconfiguresaccessrelatedparametersinthefollowingthreeareas:
• Services
• IPAddresses
• Passwords
AccessControlisusedtocontrollocalandremotemanagementsettingsforyourGateway.
6.2.1 Services
The Service control List (ScL) allows you to enable or disable your Local Area network (LAn) or WideAreaNetwork(WAN)servicesbytickingthecheckboxasillustratedbelow.Theseaccessservicesareavailable:FTP,HTTP,ICMP,SSH,TeLNeT,andTFTP.ClickSave/Applytocontinue.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 43
6.2.2 IP Address
TheIPAddressoptionlimitslocalaccessbyIPaddress.WhentheAccessControlModeisenabled,onlytheIPaddresseslistedherecanaccessthedevice.BeforeenablingAccessControlMode,addIPaddresseswiththeAddbutton.
On this screen, enter the IP address Subnet mask and the different interface for which you wish to allow permission.ClickSave/Applytocontinue.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE44
6.2.3 Passwords
ThePasswordsoptionconfiguresyouraccountaccesspasswordforyourGateway.Accesstothedeviceislimitedtothefollowingthreeuseraccounts:
• administobeusedforlocalunrestrictedaccesscontrol
• supportistobeusedforremotemaintenanceofthedevice
• useristobeusedtoviewinformationandupdatedevicefirmware
Usethefieldsillustratedinthescreenbelowtochangeorcreateyourpassword.Passwordsmustbe16charactersorlesswithnospaces.ClickSave/Applytocontinue.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 45
6 .3 CONFIGUReSNMPAGeNTONTHe3G10WVTTheSimpleNetworkManagementProtocol(SNMP)allowsanetworkadministratortomonitoranetworkbyretrievingsettingsonremotenetworkdevices.Todothis,theadministratortypicallyrunsanSNMPmanagementstationprogramsuchasMIBbrowseronalocalhosttoobtaininformationfromtheSNMPagent,inthiscasethe3G10WVT(ifSNMPenabled).AnSNMP‘community’performsthefunctionofauthenticatingSNMPtraffic.A‘communityname’actsasapasswordthatistypicallysharedamongSNMPagentsandmanagers.
Bydefault,SNMPagentisenabledonthegateway.
S E T T I n G U P S n m P A G E n T1. Openawebbrowser(Ie/Firefox/Safari),typeinLANaddressofthegateway(http://10.0.0.138
bydefault)tologintothewebinterface.
2. Theloginusernameandpasswordbydefaultisadmin/admin.
3. GotoAdvancedSettings>SNMP.enableSNMPagentandsetupalloptionsaccordingtothescreenshotbelow.
4. ClickSave/Applytoactivatethesesettings.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE46
6 .4 S IMPLeNeTWORkTIMePROTOCOL (SNTP)ThisscreenallowsyoutoconfigurethetimesettingsofyourGateway.ToautomaticallysynchronizewithInternettimeservers,ticktheboxasillustratedbelow.
Thefollowingoptionsshouldnowappear(seescreenshotbelow):
First NTP time server: Selecttherequiredserver.
Second NTP time server: Selectsecondtimeserver,ifrequired.
Time zone offset: Selectthelocaltimezone.
ConfiguretheseoptionsandthenclickSave/Applytoactivate.
NOTe: SNTPmustbeactivatedtouseParentalControl(section7.3.2).
6 .5 SAVeANDReBOOTThisfunctionsavesthecurrentconfigurationsettingsandrebootsyourGateway.
NOTe1: ItmaybenecessarytoreconfigureyourTCP/IPsettingstoadjustforthenewconfiguration.Forexample,ifyoudisabletheDynamicHostConfigurationProtocol(DHCP)serveryouwillneedtoapplyStaticIPsettings.
NOTe2: Ifyouloseallaccesstoyourwebuserinterface,simplypresstheresetbuttonontherearpanelfor5-7secondstorestoredefaultsettings.
We
b U
se
r In
te
rfa
ce
A D VA n c E D S E T U P
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE48
ADVA nCED S ETU p
ThischapterexplainsadvancedsetupforyourGateway:
7 .1 LOCAL AReANeTWORk (LAN)ThisscreenallowsyoutoconfiguretheLocalAreaNetwork(LAN)interfaceonyourGateway.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 49
Seethefielddescriptionsbelowformoredetails.
Note:Ifyouchangeyourgateway’sIPaddress(firstoptiononthechart),theinstallationsoftware/connectionmanagermaynotbeabletocommunicatewiththegateway.Pleaseresetthegateway’sIPaddressto10.0.0.138ifthisoccurs.
Option Description
IP Address Enter the IP address for the LAn interfaceSubnet Mask Enter the subnet mask for the LAn interfaceEnable UPnP TicktheboxtoenableUniversalPlugandPlayEnable Half-Bridge The Telstra Turbo 7 Wireless Gateway with Voice can be set up as a half-
transparentbridgetocopewithsomespecialapplicationssuchasVPNpass-through.Bydefaulthalf-bridgeisoff.PleaserefertoAppendixBformoreinformation.
Enable Internet Group Management Protocol (IGMP) Snooping
enablebytickingthebox
StandardMode:Instandardmode,multicasttrafficwillfloodtoallbridgeportswhennoclientsubscribestoamulticastgroup.
BlockingMode:Inblockingmode,themulticastdatatrafficwillbeblocked.Whentherearenoclientsubscriptionstoamulticastgroup,itwillnotfloodtothebridgeports.
Dynamic Host Configuration Protocol (DHCP) Server
SelectenableDHCPserverandenteryourstartingandendingIPaddressesandtheleasetime.ThissettingconfiguresthegatewaytoautomaticallyassignIP,defaultgatewayandDNSserveraddressestoevery DHcP client on your LAn
Enable NAT Toenable/disableNetworkAddressTranslation(NAT,pleasereferto7.2forNATsetting).BydefaultNATisenabled.
Option 42, 66,150,160 TheseoptionsareusedforspecialDHCPsetup.
Static IP Lease List TospecifytheIPaddressassignedthroughDHCPaccordingtotheMACaddressofthehostsconnectedtotheGateway.
Enable DHCP Server Relay
TorelayDHCPrequestsfromthesubnetwithnoDHCPserveronittoaDHCPserveronothersubnets.DHCPServerRelayisdisabledbydefault.Toaccessenable DHcP relay, please un-tick nAT enable first, that means to disable NATfirst,andthenpresssavebutton.TheenableDHCPserverRelayoptionwillthenshowuponthesamepageasbelow:
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE50
ConfigureasecondIPaddressbytickingthecheckboxshownbelowandenterthefollowinginformation:
IP Address: enterthesecondaryIPaddressfortheLANinterface.
Subnet Mask: enterthesecondarysubnetmaskfortheLANinterface.
NOTe: TheSavebuttonsavesnewsettingstoallowcontinuedconfiguration,whiletheSave/Rebootbuttonnotonlysavesnewsettingsbutalsorebootsthedevicetoapplythenewconfiguration(i.e.allnewsettings).
7 .2 NeTWORkADDReSSTRANSLATION (NAT )
7.2.1 Port Forwarding
PortForwardingallowsyoutodirectincomingtrafficfromtheInternetside(identifiedbyProtocolandexternalport)totheinternalserverwithaprivateIPaddressontheLANside.TheInternalportisrequiredonlyiftheexternalportneedstobeconvertedtoadifferentportnumberusedbytheserverontheLANside.Amaximumof32entriescanbeconfigured.
ToaddaVirtualServer,clicktheAddbutton.Thefollowingscreenwilldisplay.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 51
Options Description
Select a Service
Or
Custom Server
Usershouldselecttheservicefromthelist.
Or
create a custom server and enter a name for the server
Server IP Address entertheIPaddressfortheserver.
External Port Start
enterthestartingexternalportnumber(whenyouselectCustomServer).Whenaserviceisselectedtheportrangesareautomaticallyconfigured.
External Port End entertheendingexternalportnumber(whenyouselectCustomServer).Whenaserviceisselectedtheportrangesareautomaticallyconfigured.
Protocol Usercanselectfrom:TCP,TCP/UDPorUDP.
Internal Port Start
entertheinternalportstartingnumber(whenyouselectCustomServer).Whenaserviceisselectedtheportrangesareautomaticallyconfigured
Internal Port End entertheinternalportendingnumber(whenyouselectCustomServer).Whenaserviceisselectedtheportrangesareautomaticallyconfigured.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE52
7.2.2 Port Triggering
SomeapplicationsrequirespecificportsintheGateway’sfirewalltobeopenforaccessbyremoteparties.PortTriggeringopensupthe‘OpenPorts’inthefirewallwhenanapplicationontheLANinitiatesaTCP/UDPconnectiontoaremotepartyusingthe‘TriggeringPorts’.TheGatewayallowsthe remote party from the WAn side to establish new connections back to the application on the LANsideusingthe‘OpenPorts’.Amaximum32entriescanbeconfigured.
ToaddaTriggerPort,simplyclicktheAddbutton.Thefollowingwillbedisplayed.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 53
Options Description
Select an Application
or
Custom Application
Usershouldselecttheapplicationfromthelist.
or
Usercanenterthenameoftheirchoice.
Trigger Port Start enterthestartingtriggerportnumber(whenyouselectcustomapplication).Whenanapplicationisselected,theportrangesareautomaticallyconfigured.
Trigger Port End entertheendingtriggerportnumber(whenyouselectcustomapplication).Whenanapplicationisselected,theportrangesareautomaticallyconfigured.
Trigger Protocol TCP,TCP/UDPorUDP.Open Port Start enterthestartingopenportnumber(whenyouselectcustomapplication).
Whenanapplicationisselected,theportrangesareautomaticallyconfigured.
Open Port End entertheendingopenportnumber(whenyouselectcustomapplication).Whenanapplicationisselected,theportrangesareautomaticallyconfigured.
Open Protocol TCP,TCP/UDPorUDP.
7.2.3 Demilitarized (DMZ) Host
YourGatewaywillforwardIPpacketsfromtheWideAreaNetwork(WAN)thatdonotbelongtoanyoftheapplicationsconfiguredintheVirtualServerstabletotheDMZhostcomputer.
enterthecomputer’sIPaddressandclickApplytoactivatetheDMZhost.
clear the IP address field and click Apply todeactivatetheDMZhost.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE54
7 .3 SeCURITYYour Gateway can be secured with IP Filtering or Parental Controlfunctions.
7.3.1 IP Filtering
TheIPFilteringscreensetsfilterrulesthatlimitincomingandoutgoingIPtraffic.Multiplefilterrulescanbesetwithatleastonelimitingcondition.AllconditionsmustbefulfilledtoallowindividualIPpacketstopassthroughthefilter.
Outgoing IP Filter
ThedefaultsettingforOutgoingtrafficisACCEPTED.Underthiscondition,alloutgoingIPpacketsthat match the filter rules will be BLOCKED.
Toaddafilteringrule,clickthe Addbutton.Thefollowingscreenwilldisplay.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 55
Options Description
Filter Name The filter rule label
Protocol TcP, TcP/UDP, UDP or IcmP
Source IP address Enter source IP address
Source Subnet Mask Enter source subnet mask
Source Port (port or port:port)
entersourceportnumberorportrange
Destination IP address Enter destination IP address
Destination Subnet Mask
Enter destination subnet mask
Destination port (port or port:port)
enterdestinationportnumberorrange
click Save/Applytosaveandactivatethefilter.
Incoming IP Filter
ThedefaultsettingforallIncomingtrafficisBLOCKED.UnderthisconditiononlythoseincomingIP packets that match the filter rules will be ACCEPTED.
Toaddafilteringrule,clicktheAddbutton.Thefollowingscreenwilldisplay.
PleaserefertotheOutgoingIPFiltertableforfielddescriptions.
click Save/Applytosaveandactivatethefilter.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE56
7.3.2 Parental Control
Parental control allows you to restrict access from a device on your Local Area network (LAn) totheInternetthroughtheGatewayonselecteddaysatcertaintimes.MakesuretoactivatetheInternetTimeserversynchronizationasdescribedinsection6.4SNTP,sothatthescheduledtimesmatchyourlocaltime.
ClickAddtodisplaythefollowingscreen.entertheMACaddressofthedevicethatyouwishtorestrictaccessforandselectdaysoftheweekandtimestoapplytherestriction.
complete the fields listed below and click Save/Applytoapplythesettings.
Options Description
User Name A user-defined label for this restriction
Browser’s MAC Address
AllowseasyidentificationofMACaddressofthecomputerrunningthebrowser
Other MAC Address mAc address of another LAn device
Days of the Week Selectonemoremoredaysfortherestrictionstoapplyto.
Start Blocking Time Enter the time you want the restriction to start
End Blocking Time Enter the time you want the restriction to end
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 57
7 .4 ROUTINGDefault Gateway, Static Route and Dynamic RoutesettingscanbefoundintheRoutinglinkasillustratedbelow.
7.4.1 Default Gateway
If the Enable Automatic Assigned Default Gateway checkbox is selected, this device will accept adefaultGatewayassignment.Ifthecheckboxisnotselected,afieldwillappearallowingyoutoenterthestaticdefaultgatewayand/orWANinterface,thenclickSave/Apply.
nOTE: After enabling the Automatic Assigned Default Gateway, you must re-boot the Gateway to activate the assigned default Gateway.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE58
7.4.2 Static Route
TheStaticRoutescreendisplaystheconfiguredstaticroutes.
ClicktheAddorRemovebuttonstochangesettings.
ClicktheAddbuttontodisplaythefollowingscreen.
enterDestinationNetworkAddress,SubnetMask,GatewayIPAddressand/orWANInterface.ThenclickSave/Applytoaddtheentrytotheroutingtable.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 59
7.4.3 Dynamic Route
Toactivatethisoption,selecttheenabledradiobuttonforGlobalRIPMode.
Toconfigureanindividualinterface,selectthedesiredRIPversionandoperation,followedbyplacingacheckintheenabledcheckboxforthatinterface.ClickSave/Applytosavetheconfigurationandtostartorstopdynamicrouting.
7 .5 DOMAINNAMeSeRVeRS (DNS)7.5.1 DNS Server Configuration
IftheenableAutomaticAssignedDNScheckboxisselected,thisdevicewillacceptthefirstreceivedDNSassignmentfromtheWideAreaNetwork(WAN)interfaceduringtheconnectionprocess.Ifthecheckboxisnotselected,afieldwillappearallowingyoutoentertheprimaryandoptionalsecondaryDNSserverIPaddresses.ClickonSavetoapply.
nOTE: Click the Save button to save the new configuration. To make the new configuration effective, reboot your Gateway.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE60
7.5.2 Dynamic DNS
The Dynamic DnS service allows a dynamic IP address to be aliased to a static hostname in any of aselectionofdomains,allowingthegatewaytobemoreeasilyaccessedfromvariouslocationsontheinternet.
note: The Add/Remove buttons will be displayed only if the gateway has been assigned an Ip address from the remote server.
ToaddadynamicDNSservice,clicktheAddbuttonandthisscreenwilldisplay.
Options Descriptions
D-DNS provider SelectadynamicDNSproviderfromthelist.
Hostname enterthenameforthedynamicDNSserver.
Interface Selecttheinterfacefromthelist.
Username entertheusernameforthedynamicDNSserver.
Password enterthepasswordforthedynamicDNSserver.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 61
VO I c E
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE6�
VOICE
TheTurbo7WirelessGatewaywithVoiceallowsyoutomaketelephonecallsovertheNextG™networkusingastandardAnalogueTelephoneviathebuiltinRJ-11Phoneport.
PleaserefertothedocumentationprovidedbythemanufacturerofyourAnalogueTelephoneforhelpwiththeoperationofyourtelephone.
8 .1 CONFIGURINGYOURTURBO7 WIReLeSSGATeWAYFORP L A c I n G VO I c E c A LL S
OnceyourGatewayhasbeencorrectlyconfiguredtoaccesstheNextG™networkasoutlinedinSection2.1–QuickSetup,youcanmakeandreceivetelephonecallsafterconnectingyourAnalogueTelephonetothesocketlabeledPhoneonthebackofyourTurbo7WirelessGatewaywithVoice.
ForvoicecallsovertheNextG™network,notethatyourSIMcardneedstobeprovisionedforVoiceCalling.PleaseconsultwithTelstraforverification.AlsopleasenotethatanytelephonecallsplacedusingtheGatewaywillincurcallusagechargesatmobilecallrates.PleasecontactTelstraformoreinformation.
STAT US
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE64
STATUS
THE STATUS MEnU HAS THE f OLLOWI nG SUBME nUS:
• Diagnostics
• SystemLog
• NextG™network
• Statistics
• Route
• ARP
• DHCP
• PING
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 65
9 .1 DIAGNOSTICSTheDiagnosticsmenuprovidesfeedbackontheconnectionstatusofthedevice.Theindividualtestsarelistedbelow.Ifatestdisplaysafailstatus:
1: ClickontheHelp link
2: Nowclick Re-run Diagnostic Tests at the bottom of the screen to re-test and confirm the error
3: Ifthetestcontinuestofail,followthetroubleshootingproceduresintheHelpscreen.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE66
Test Description
ENET Connection Pass:IndicatesthattheethernetinterfacefromyourcomputerisconnectedtotheLANportofthisGateway.
Fail:IndicatesthattheGatewaydoesnotdetecttheethernetinterfaceonyourcomputer.
Wireless connection Pass:IndicatesthatthewirelesscardisON.
Down:IndicatesthatthewirelesscardisOFF.
Ping Default Gateway
Pass:IndicatesthattheGatewaycancommunicatewiththefirstentrypointtothenetwork.ItisusuallytheIPaddressoftheISP’slocalGateway.
Fail:IndicatesthattheGatewaywasunabletocommunicatewiththefirstentrypointonthenetwork.ItmaynothaveaneffectonyourInternetconnectivity.ThereforeifthistestfailsbutyouarestillabletoaccesstheInternet,thereisnoneedtotroubleshootthisissue.
Ping Primary Domain Name Server
Pass:IndicatesthattheGatewaycancommunicatewiththeprimaryDomainNameServer(DNS).
Fail:IndicatesthattheGatewaywasunabletocommunicatewiththeprimaryDomainNameServer(DNS).ItmaynothaveaneffectonyourInternetconnectivity.ThereforeifthistestfailsbutyouarestillabletoaccesstheInternet,thereisnoneedtotroubleshootthisissue.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 67
9.2 SYSTeMLOGThisfunctionallowsyoutoviewsystemeventsandconfigurerelatedoptions.FollowthestepsbelowtoenableandviewtheSystemLog.
1: ClickConfigureSystemLogtocontinue.
2: Selectthesystemlogoptions(seetablebelow)andclickSave/Apply.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE68
Option Description
Log Indicateswhetherthesystemiscurrentlyrecordingevents.Youcanenableordisableeventlogging.Bydefault,itisdisabled.
Log level Allowsyoutoconfiguretheeventlevelandfilteroutunwantedeventsbelowthislevel.Theeventsrangingfromthehighestcriticallevel“emergency”downtothisconfiguredlevelwillberecordedtothelogbufferontheGateway’sSDRAM.Whenthelogbufferisfull,thenewesteventwillwrapuptothetopofthelogbufferandoverwritetheoldestevent.Bydefault,theloglevelis“Debugging”,whichisthelowestcriticallevel.Theloglevelsaredefinedasfollows:
emergencyisthemostseriouseventlevel,whereasDebuggingistheleastimportant.Forinstance,iftheloglevelissettoDebugging,alltheeventsfromthelowestDebuggingleveltothemostcriticallevelemergencylevelwillberecorded.Iftheloglevelissettoerror,onlyerrorandthelevelabovewillbelogged.
Display Level AllowsyoutoselecttheloggedeventsanddisplaysontheViewSystemLogwindowforeventsofthislevelandabovetothehighestemergencylevel.
Mode Allows you to specify whether events should be stored in the local memory, besenttoaremotesyslogserver,ortobothsimultaneously.
Ifremotemodeisselected,theviewsystemlogwillnotbeabletodisplayeventssavedintheremotesyslogserver.WheneitherRemotemodeorBothmodeisconfigured,theWeBUIwillprompttheyoutoentertheServerIPaddressandServerUDPport.
3: ClickViewSystemLog.Theresultsaredisplayedasfollows.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 69
9.3 NeXTGT m STAT USSelectthisoptionfordetailedstatusinformationonyourGateways3Gconnection.
Consultthetableonthenextpagefordetailedfielddescriptions.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE70
Status Description
Manufacturer Themanufactureroftheembedded3Gmodule.
Model Themodelnameoftheembedded3Gmodule.
FW Rev. Thefirmwareversionofthe3Gmodule.
IMEI TheIMeI(InternationalMobileequipmentIdentity)isa15digitnumberthatisusedtoidentifyamobiledeviceonanetwork.
FSN FactorySerialNumberofthe3Gmodule.
IMSI TheIMSI(InternationalMobileSubscriberIdentity)isaunique15-digitnumberusedtoidentifyanindividualuseronaGSMorUMTSnetwork.
HW Rev. Thehardwareversionofthe3Gmodule.
Temperature Thetemperatureofthe3GmoduleindegreesCelsius.
System Mode WcDmA/Europe
cDmA �000 / America
WCDMA band The3Gradiofrequencybandwhichsupportstri-bandUTMS/HSDPA/HSUPAfrequencies(850/1900/2100MHz),IMT2000is2100MHz,WCDMA800is850MHz,WCDMA1900is1900MHz.
GSM band The2GradiofrequencybandwhichsupportsQuad-bandGSM/GRPSfrequencies,includingGSM850,GSM900,DCS1800,PCS1900witheachnumberrepresentingtherespectivefrequencyinMHz.
WCDMA channel The3Gchannel.
GSM channel The2Gchannel.
GSM (PS) state PacketSwitchingstate
MM (CS) state CircuitSwitchingstate
Signal Strength The3G/2GservicesignalstrengthindBm.
Signal level in dBm
-109 ~ -103 -101 ~ -93 -91 ~ -87 -85 ~ -79 -77 ~ -52
5Signalbars
LED Low Medium High
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 71
Status Description
Signal Level (RSSI) 3GRadioSignalStrengthIndex
Value 2 ~ 5 6 ~ 10 11 ~ 13 14 ~ 17 18 ~ 31 99
Signal level in dBm
-109 ~ -103
-101 ~ -93 -91 ~ -87 -85 ~ -79 -77 ~ -52 unknown
5 Signal bars
LED Low Medium High
Quality (Ec/Io) Thetotalenergyperchipperpowerdensity(ec/Io)valueoftheactiveset’sthreestrongestcells.
Network Registration Status
ShoulddisplayasregisteredwithavalidunlockedSIMcard.
Network Name The3GinternetServiceProvider.
Country & Network Codes
eachcountryandnetworkhasauniquecode.
Cell ID Thenetworkinformationforthe“serving”cellID.
Primary Scrambling Code (PSC)
The PSc of the reference WcDmA cell
Data Session Status connected or Disconnected
HSUPA/HSDPA Categories
TheHSUPA/HSDPAcategoriescorrespondtodifferentdatatransmissionrateswithhighernumbersgenerallyindicatingfasterrates
Received Signal Code Power (RSCP)
TheRSCPoftheactiveset’sthreestrongestcells
Battery Connection Status (BCS)
BcS of the mT (mobile Termination)
Battery Charge Level (BCL)
BcL of the mT (mobile Termination)
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE7�
9.4 STATISTICSThesescreensprovidedetailedinformationfor:
• LocalAreaNetwork(LAN)andWirelessLocalAreaNetwork(WLAN)
• 3GInterfacesnOTE: These statistics page refresh every 15 seconds.
9.4.1 LAN Statistics
ThisscreendisplaysstatisticsfortheethernetandWirelessLANinterfaces.
Interface Shows connection interfaces
Received/Transmitted
Bytes Rx/TX(receive/transmit)packetinbytes
Pkts Rx/TX(receive/transmit)packets
Errs Rx/TX(receive/transmit)packetswitherrors
Drops Rx/TX(receive/transmit)packetsdropped
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 73
9.4.2 Next G™ Statistics
ClickNextG™networkintheStatisticssubmenutodisplaythescreenbelow.
Service Shows the service type
Inbound Octets Numberofreceivedoctetsovertheinterface.
Packets Numberofreceivedpacketsovertheinterface.
Drops Receivedpacketswhicharedropped.
Error Receivedpacketswhichareerrors.
Outbound Octets NumberofTransmittedoctetsovertheinterface.
Packets NumberofTransmittedpacketsovertheinterface.
Drops Transmitted packets which are dropped
Error Transmittedpacketswhichareerrors.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE74
9 .5 ROUTeSelectRoutetodisplaythepathstheGatewayhasfound.
Field Description
Destination Destination network or destination host
Gateway next hop IP address
Subnet Mask Subnet mask of Destination
Flag U:routeisup
!:rejectroute
G:usegateway
H:targetisahost
R:reinstateroutefordynamicrouting
D:dynamicallyinstalledbydaemonorredirect
M:modifiedfromroutingdaemonorredirect
Metric The‘distance’tothetarget(usuallycountedinhops).Itisnotusedbyrecentkernels,butmaybeneededbyroutingdaemons.
Service Shows the name for WAn connection
Interface Shows connection interfaces
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 75
9 .6 ARPClickARPtodisplaytheARPinformation.
Field Description
IP address Shows IP address of host pc
Flags complete
Incomplete
Permanent
Publish
HW Address Shows the mAc address of host pc
Device Shows the connection interface
9.7 DYNAMICHOSTCONFIGURATIONPROTOCOL (DHCP)ClickDHCPtodisplaytheDHCPinformation.
Field Description
Hostname Shows the device/host/Pc network name
MAC Address Shows the Ethernet mAc address of the device/host/Pc
IP address Shows IP address of device/host/Pc
Expires In Shows how much time is left for each DHcP Lease
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE76
9.8 PING
ThePINGmenuprovidesfeedbackofconnectiontesttoanIPaddressorahostname.
InputanIPaddressorahostname,e.gwww.google.comandpressSubmit.Theconnectiontestresultwillbeshownasbelow.
Theabovescreenisnotshowingsuccessfulpingresult
A P P E n D I c I E S
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE78
ThesestepsexplaintheprocedureforenablingthePrintServer.
1: enablePrintServerfromtheAdvancedmenuintheWebUserInterface.
Select Enable on-board print server checkbox and enter Printer name and Make and model
nOTE: The printer name can be any text string up to 40 characters. The Make and model can be any text string up to 128 characters.
FORWINDOWSXP:2: GotothePrintersandFaxesapplicationintheControlPanelandselecttheAddaprinter
function(aslocatedonthesidemenubelow).
AppEnDIx A : pRI nT S ERVER
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 79
3: ClickNexttocontinue,whenyouseethedialogboxbelow.
4: SelectNetworkPrinterandclickNext.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE80
5: SelectConnecttoaprinterontheInternetandenteryourprinterlink.
(e.g.http://10.0.0.138:631/printers/printername)andclickNext.NOte: the printer name must be the same name entered in the web user interface “printer server setting” as in step 1.
6: ClickHave DiskandinserttheprinterdriverCD.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 81
7: SelectdriverfiledirectoryonCD-ROMandclickOK.
8: Oncetheprinternameappears,clickOK.
9: ChooseYesorNofordefaultprintersettingandclickNext.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE8�
10:Click“Finish”.
11:CheckthestatusofprinterfromWindowsControlPanel,printerwindow.StatusshouldshowasReady.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 83
FORMACOSX:2. BrowsetotheApplemenuandselectSystemPreferences.IntheSystemPreferencesmenu
clickonPrint&Fax.
3. WithyourPrinterdriverinstalled,pleaseaddyourprinterfromthePrinter&Faxmenu.
4. Click+toaddyourprinterfromthePrint&Faxmenu.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE84
5. SelectInternetPrintingProtocol–IPPfromtheProtocoldropdownlist.
6. TypeintotheAddressfield“GatewayIPAddress:361”whereGatewayIPAddressistheIPaddressofyourGateway(default:10.0.0.138).Seescreenshotbelowforanexample.AlsoenterintotheQueuefield“/printers/PrinterName”,wherePrinterNameisthenameyougaveyourprinterintheinitialstepabove.
7. SelectyourprinterfromthePrintUsingdropdownlist.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 85
8. ClickAddandchecktheprinterstatus.
PrintServersetupisnowcomplete.YouwillnowbeabletoprintfromcommonapplicationsbyselectingthisprinterfromthePrintdialoguebox.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE86
f O R W I n D OW S V I STA2. Gotothecontrolpanel,andselectPrinters.OnceinthePrinterspage,clicktheAddaprinter
buttonasshownbelow.
3. SelectAddanetwork,wirelessorbluetoothprinter.
4. Clickontheradio-buttonlabelledSelectasharedprinterbyname,andtype“http://10.0.0.138:631/printers/PrinterName”intheboxbelow.ClickNext.
nOTE: The printername must be the same as the printer name entered in the Web User Interface above.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 87
5. Next,selectthedriverthatcamewithyourprinter.Browsethroughthelisttoselectyourprinterdriver,orclick‘HaveDisk’ifyouhaveyourprinterdriverinstallationmedia.
6.Choosewhetheryouwantthisprintertobethedefaultprinter,andthenclickNext.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE88
7.ClickFinish.Yourdeviceisnowconfiguredandreadyforuse.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 89
ThesestepsexplaintheprocedureforenablingtheUSBStorage.
1: enableSambaServerfromWebUserInterface.
Select Enable Samba checkbox and enter netbios name and Directory name
Field DescriptionNetbios Name It is the hostname of the Pc
Thedefaultnameis“ntc-cpe”
Directory Name Thefoldernameof“root”directory.
Thedefaultnameis“ntc-cpe”
FORWINDOWSXP:2: Openaweb-browser(suchasInternetexplorer,FirefoxorSafari)andtypeintheaddress.
\\”NetbiosName”\”DirectoryName”\(eg.\\ntc-cpe\ntc-cpe)
note: There is no username and password required to access the USB drive, the user will be able to read/write the folder/files in the USB drive.
AppEnDIx B : USB STORAGE
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE90
FORMACOSX:2. FromtheFinder,selecttheGoandthenclickConnecttoServer
3. IntheaddressfieldoftheConnecttoServerdialog,typeintheaddress:
smb://“NetbiosName”/“DirectoryName”(egsmb://ntc-cpe/ntc-cpe)
4. Clickthe+buttontoaddthisservertothelistofFavouritesandthenclickConnect
5. SelecttheGuestradiobuttonandthenclickConnect
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 91
f O R W I n D OW S V I STA1. Openaweb-browser(suchasInternetexplorer,FirefoxorSafari)
2. Typeintheaddress“\\NetbiosName\DirectoryName\”(eg\\ntc-cpe\ntc-cpe)
note: There is no username and password required to access the USB drive. Any network user will be able to read/write the folder/files in the USB drive.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE9�
AppEnDIx C :CL I COMMA nDS VIA TELnET
Show all CLI commands
Description:ListallavailableCLIcommandsthatthe3Ggatewaysupports.
Synopsis:help|?
example:
>help
?
help
logout
reboot
ddns
dumpcfg
arp
defaultgateway
dhcpserver
dns
lan
passwd
remoteaccess
restoredefault
route
save
ping
sntp
sysinfo
tftp
wlan
sierra
version
build
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 93
serialnumber
End the telnet session
Description:endthetelnetsession
Synopsis:logout
example:
>logout
Reset/reboot device
Description:Torebootthegateway.
Synopsis:reboot
example:
>reboot
RadioSignalStrength
Description:Displaythe3Gradiosignalstrength.
Synopsis:sierrashow--signal
Example:
>sierrashow--signal
signal:23
note: Signal value is explain in the table below
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE94
Radio Band
Description:Displaythe3Gband
Synopsis:sierrashow--band
Example:
>sierrashow--band
band:IMT2000
Note:IMT2000isband2100andWCDMA800isband850
connection status
Description:Displaythe3Gnetworkconnectionstatus
Synopsis:sierrashow–link
sierrashow--gstatus
Examples:
>sierrashow--link
link:Connected
>sierrashow--gstatus
CurrentTime:450Temperature:45
BootupTime:1Mode:ONLINe
Systemmode:WCDMAPSstate:Attached
WCDMAband:WCDMA800GSMband:Unknown
WCDMAchannel:4436GSMchannel:65535
GMM(PS)state:ReGISTeReDNORMALSeRVICe
MM(CS)state:IDLeNORMALSeRVICe
WCDMAL1State:L1M_FACHRRCState:CeLL_FACH
RXlevel(dBm):-90
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 95
IMSI & IMEI read
Description:DisplaytheIMSIandIMeIvalue
Synopsis:sierrashow--imsi
sierra show --imei
Example:
>sierrashow--imsi
imsi:466974800524867
>sierrashow--imei
IMeI:354219010024303
network Information
• sierra show --hsdcat
Description:ToindicatethecurrentHSDPAcategory.
Synopsis:sierrashow--hsdcat
example:
>sierrashow--hsdcat
!HSDCAT:8
• sierra show --hsucat
Description:ToindicatethecurrentHSUPAcategory.
Synopsis:sierrashow--hsucat
Example:
>sierrashow--hsucat
!HSUCAT:5
• sierra show --mode
Description:Toreportthecurrentavailableandsupportednetworktechnologiesbeingused.
Synopsis:sierrashow--mode
example:
>sierrashow--mode
mode:UMTS
(Validvalues:“GSM”,“GPRS”,“eDGe”,“UMTS”,“HSDPA”,“HSUPA”)
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE96
• sierrashow--registration
Description:TodisplaytheNetworkRegistrationStatus,CountrycodeandNetworkcode.
Synopsis:sierrashow--registration
example:
>sierrashow--registration
NetworkName:TelstraMobile
CountryCode:505
NetworkCode:01
RegistrationStatus:registered.
APN (Access Point Name) read and set
Description:AllowsusertoreadandconfiguretheAPNonthe3Ggateway.Commandsinclude:
• sierrashow--apn<profile>
Description:TodisplaytheAPNvalueforcustomAPNprofile.
Synopsis:sierrashow[--apn<profile>]
<profile>1:telstra.pcpack2:telstra.datapack3:telstra.internet4:CustomAPN
example:DisplaythecurrentAPNfortheprofileCustomAPN
>sierrashow--apn1
Profile1APN:telstra.pcpack
• sierraset--apn<profile><apn>
Description:ToconfiguretheAPNvalueforcustomAPNprofile.
Synopsis:sierraset[--apn<profile><apn>]
<profile>4:CustomAPN
example:SettheCustomAPNtotest.test
>sierraset--apn4test.test
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 97
Authentication Method set and read
Description:Tosetandqueryauthenticationmethod(PAP/CHAP/AUTO)forPDP-IPpacketdatacallsiftheprofilesupports.
Synopsis:Authenticationmethodset:
sierraset--auth<profile><method>
<profile>4:CustomAPN
<method>0:AUTO1:PAP2:CHAP
Authenticationmethodread:
sierrashow--auth<profile>
<profile>4:CustomAPN
examples:ConfigurethecustomerprofiletoauthenticationPAP
>sierraset--auth41
Displaythecurrentauthenticationrequirementforthecustomerprofile
>sierrashow–auth4
Profile4:“PAP”
Set Radio Band for APN profile
Description:ToconfigurethefrequencybandforeachAPNprofile.
Synopsis:sierraset[--band<profile><band>]
<profile>1:telstra.pcpack2:telstra.datapack3:telstra.internet4:CustomAPN
<band>0:auto1:3G-850Only2:3G-850/2G-900/18003:3G-ALL4:2G-ALL
example:
Configurethecustomerprofiletoselectfrequencybandautomatically
>sierraset--band40
>reboot
(Pleaserebootthegatewaytomakethechangetotakeeffectafterconfiguringthebandsetting)
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE98
IP header/Data compression set and read
• sierraset--comp<profile><type><enable|disable>
Description:ToenableordisabletheIPheadercompressionanddatacompressionfunctions.
Synopsis:sierraset[--comp<profile><type><enable|disable>]
<profile>1:telstra.pcpack2:telstra.datapack3:telstra.internet4:CustomAPN
<type>0:IPHeADeR1:DATA
example:enabletheIPheadercompressionforCustomAPN
>sierraset--comp40enable
• sierrashow--comp<profile>
Description:TodisplaytheIPheaderordatacompressionstatus.
Synopsis:sierrashow--comp<profile>
<profile>1:telstra.pcpack2:telstra.datapack3:telstra.internet4:CustomAPN
examples:
>sierrashow--comp1
Profile1:IPHisOff,DATAisOff
Connect / Disconnect PPP session
Description:ToconnectordisconnectthePPPsession.Theprofiletobeusedtodevelopaconnectionisthelatestconfiguredbythesierrasetcommand.
Synopsis:sierraset[--connection<connect¦disconnect><num>]
<num>0:FirstAPN1:SecondaryAPN
examples:ToconnectthePPPsession
>sierraset–connectionconnect
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 99
PIN code configuration
• sierraset--PIN-LOCk<enable|disable><PINcode><save>
Description:ToenableordisablethePINcodeprotectionandsavetotheSIMcard.
Synopsis:sierraset[--PIN-LOCk<enable|disable><PINcode>]<save>
example:ToenabletheSIMPINprotectionwithPINcode0000
>sierraset--PIN-LOCkenable0000save
• sierraset--PIN<PINcode><save>
Description:TosavethePINcodeintogatewayconfigurationsettings.
Synopsis:sierraset[--PIN<PINcode><save>]
example:TosavethePINcode0000intogatewayconfigurationsetting
>sierraset--PIN0000save
• sierrashow--PIN-LOCk
Description:TodisplaythePINcodeprotectionstatus.
Synopsis:sierrashow--PIN-LOCk
example:
>sierrashow--PIN-LOCk
PIn code protection is disabled
• sierra show --SIm
Description:TodisplaytheSIMcardstatus.
Synopsis:sierrashow--SIM
example:
>sierrashow--SIM
SIm inserted (SIm card is correctly inserted to the USIm slot)
SIm not inserted (SIm card is not inserted to the USIm slot)
USIm is PIn locked (SIm card is locked by the PIn code)
IncorrectSIM(aSIMcardfromotherInternetserviceproviderisinserted,SIMcardcan’tberecognizedbythenetwork)
PUklocked(SIMcardislockedbythePUkcode)
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE100
• sierraset--PIN-CHG<oldPINcode><newPINcode>
Description:ChangethecurrentPINcodetothenewone.
Synopsis:sierraset[--PIN-CHG<oldPINcode><newPINcode>]
example:ChangethePINcodefrom0000to1111
>sierraset--PIN-CHG00001111
changedthePINcodesuccessfully
PUkcodeunlock
Description:enterthenewPUkcodeandconfigurethenewPINcodewhenthemodemis
PUklocked.
Synopsis:sierraset[--PUk<PUkkey><newPINcode>]
examples:UnlockthemodemwithPUkkey11111111andconfigurethePINcodeas0000
>sierraset--PUk111111110000
PUkunlocksuccessfully
The connection is up already!!
Wireless LAn mode set and read
Description:AllowsusertoconfiguretheWirelessLANinterfacesonthe3Ggateway.
Thiscommandcanbeusetoconfigurebasicfeature,securityfeature,wirelessbridgefeatureandMACfilterfeaturesofthewirelessLANinterface.
Synopsis:
>wlan
wlancommandusage:
wlanconfig[option]
wlansecurity[option]
wlanmacfilter[option]
wlanwds[option]
wlaninfo[option]
wlan–help
eachoptionwillbeexplainedseparatelybelow.
Note:Thesettingschangedfromthesecommandstakeeffectimmediatelyandwillbeupdatedonthewebpage
1.PleaseenablethewirelessBeFORechangingotherwirelesssettings.
2.Thewlancommandwillsavetheconfigurationintoflashmemoryandthenewsettingswillbesaved.
Sincethesettingschangedfromwlancommandtakeeffectimmediately,itisnotrecommendedtomodifythewirelesssettingsthroughtheWebUIatthesametime.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 101
Configure basic Wireless LAN features
Description:ConfigurebasicwirelessLANfeaturessuchasenableordisablethewirelessLANinterface, hide the network from active scans, set the wireless network name (also known as SSID) andrestrictthechannelsetbasedoncountryrequirements.
Synopsis:
wlanconfig[--enable<0|1>][--hide<0|1>]
[--ssid<ssidStr>][--country<countryStr>]
[--isolate<0|1>]
[--channel<channelVal>][--rate<rateVal>]
[--mrate<rateVal>]
[--rts<rtsThreshold>][--frag<fragThreshold>]
[--dtim<dtimInterval>][--beacon<beaconInterval>]
[--xpress<on|off>][--gmode<auto|performance|lrs|802.11b>]
[--gprotect<off|auto>][--preamble<long|short>]
Options:
--enable<0|1>
Description:enableordisablewirelessLANinterface.
Validvalue:0or1
0–disabledthewirelessLANinterface.
1–enabledthewirelessLANinterface.
Defaultvalue:1
--hide<0|1>
Description:HidewirelessLANnetworkname(SSID).
Validvalue:0or1
0–nothidewirelessLANSSID.
1–hidewirelessLANSSID
Defaultvalue:0
--ssid<ssidStr>
Description:SetWirelessLANnetworkname(SSID).
Validvalue:32charactersstring
--country<countryStr>
Description:SetWirelessLANCountry,onlyacceptabbreviation.
Validvalue:2or3charactersstring(AUSTRALIAisabbreviatedtoAU).
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE10�
--isolate<0|1>
Description:Setwirelessdevicesisolation.Whenenabled,wirelessdevicesconnectedtothegatewaywillnotbeabletocommunicatetoeachother
Validvalue:0or1
0–notisolatewirelessdevices.
1–isolatewirelessdevices
Defaultvalue:0
--channel<channelVal>
Description:SetthewirelessLANchannel.
Validvalue:0~14
0meansautoselectchannel.
Defaultvalue:0
--rate<rateVal>
Description:SetthewirelessLANdatarate.
Validvalue:0,1,2,5.5,6,9,11,12,18,24,36,48,54(Mbps)
0 means auto
Defaultvalue:0
--mrate<rateVal>
Description:SetthewirelessLANMulticastrate.
Validvalue:0,1,2,5.5,6,9,11,12,18,24,36,48,54(Mbps)
0 means auto
Defaultvalue:0
--rts<rtsThreshold>
Description:SetthewirelessLANRTSthreshold.
Validvalue:0~2347
Defaultvalue:234
--frag<fragThreshold>
Description:SetthewirelessLANfragmentthreshold.
Validvalue:256~2346
Defaultvalue:2346
--dtim<dtimInterval>
Description:SetthewirelessLANDTIMinterval.
Validvalue:1~255
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 103
Defaultvalue:1
--beacon<beaconInterval>
Description:SetthewirelessLANbeaconinterval.
Validvalue:1~65535
Defaultvalue:100
--xpress<on|off>
Description:enableordisablethexpressfeature
Validvalue:on/off
Defaultvalue:off
--gmode<auto|performance|lrs|802.11b>
Description:SetthewirelessLANGmode
Defaultvalue:auto
--gprotect<off|auto>
Description:enableordisablethegprotectfeature
Defaultvalue:auto
--preamble<long|short>
Description:SetthewirelessLANpreamble
Defaultvalue:long
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE104
eXAMPLe1 :UserwantstoenablethewirelessLAN,configurethewirelessLANnetworkname(SSID)as“TestAP”,configurewirelessLANchannelto5andthenhidetheSSID:
wlanconfig--enable1
wlanconfig--ssid“TestAP”
wlanconfig--channel5--hide1
Ormergetheabovecommands
wlanconfig--enable1--ssid“TestAP”--channel5--hide1
ConfigurewirelessLANsecurity
Description:enableordisableandconfigurethewirelessLANsecurity.Thisgatewaysupportsdifferenttypesofsecuritysuchas:WeP,802.1X,WPAandWPA2.
Synopsis:
wlan security open
[--wep<enabled|disabled>][--keybit<64|128>]
[--nkey1<keyStr>][--nkey2<keyStr>]
[--nkey3<keyStr>][--nkey4<keyStr>]
[--keyidx<1|2|3|4>]
wlan security shared (wep have to enable)
[--wep<enabled|disabled>][--keybit<64|128>]
[--nkey1<keyStr>][--nkey2<keyStr>]
[--nkey3<keyStr>][--nkey4<keyStr>]
[--keyidx<1|2|3|4>]
wlan security radius (wep have to enable)
[--rasip<serverIp>][--raspt<portVal>][--raskey<”raskeyStr”>]
[--wep<enabled|disabled>][--keybit<64|128>]
[--nkey2<keyStr>][--nkey3<keyStr>]
[--keyidx<2|3>]
wlan security wpa / wpa� / wpa�mix
[--wlPreauth<0|1>][--wlNetReauth<interval>]
[--wpaenc<tkip|aes|tkip+aes>][--rekey<interval>]
[--rasip<serverIp>][--raspt<portVal>][--raskey<”raskeyStr”>]
[--wep<enabled|disabled>][--keybit<64|128>]
[--nkey2<keyStr>][--nkey3<keyStr>]
[--keyidx<2|3>]
wlan security psk / psk� / psk�mix
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 105
[--wpaenc<tkip|aes|tkip+aes>][--rekey<interval>]
[--pskey<”pskeyStr”>]
[--wep<enabled|disabled>][--keybit<64|128>]
[--nkey2<keyStr>][--nkey3<keyStr>]
[--keyidx<2|3>]
Options:
--wep<enabled|disabled>
Description:enableordisableWePencryption
--keybit<64|128>
Description:SettheWePencryptionstrength
--nkey1<keyStr>
--nkey2<keyStr>
--nkey3<keyStr>
--nkey4<keyStr>
Description:SettheWePkey.
Note:5ASCIIcharactersor10hexadecimaldigitsfor64-bitencryptionkeys.
13ASCIIcharactersor26hexadecimaldigitsfor128-bitencryptionkeys
--keyidx<1|2|3|4>
Description:SetthecurrentWePkeyindex.
--rasip<serverIp>
Description:SettheRADIUSserverIPaddress.
--raspt<portVal>
Description:SettheRADIUSserverport.
Validvalue:1~65535
Defaultvalue:1812
--raskey<raskeyStr>
Description:SettheRADIUSkey.
Validvalue:stringof79characters.
--wpaenc<tkip|aes|tkip+aes>
Description:SettheWPAencryption
3G10WVT-HSPA7.2MbpsWi-FiGatewaywithVoiceUSeRGUIDe
--rekey<interval>
Description:SettheGroupRekeyInterval
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE106
Defaultvalue:0
--pskey<”pskeyStr”>
Description:SettheWPAPre-Sharedkey
Validvalue:stringof8~63characters.
Note:1.wlPreauthcanonlybeusedwithWPA2.
2.WhenusingWPA-PSkorWPA2-PSk,WPAPre-Sharedkey(pskey)mustbesetfirst.
3.WePMUSTbeenablewhensecurityissettoshared/802.1Xradiussecuritymode.
4.WePMUSTbedisablewhensecurityissettoWPA/WPA-PSksecuritymode
5.WhensettingkeyidxtoNforWePkey,ensurethatthenkeyNfieldhasastringvalue.
6.Alwaysissueacompletesecuritycommand.Forexample,onceWePisenabled,itwillstillbeenabledevenafterchangingthesecuritymode,untilthecommand“--wepdisabled”isreceivedbythegateway.
eXAMPLe2 :Aftersettingupthewirelessconfigurationinexample1,theuserwantstoconfigurethewirelessLANsecurity.
Scenario1:
WPA2withRadiusserverIPaddressof172.16.2.199
wlansecuritywpa2--rasip172.16.2.199--wlPreauth1
Scenario2:
WPA-PSkwith“123456789”asthepasskey.
wlansecuritypsk--pskey“123456789”--wpaencaes--wepdisabled
Scenario3:
802.1XwithRadiusserverIPof172.16.2.199andRADIUSkeyas“whatever”
wlansecurityradius--rasip172.16.2.199--raskey“whatever”--wepenabled
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 107
cO n f I G U R E W I R E L E SS L A n m A c f I LT E R Description:enable,disableandconfigurethewirelessLANMACfilterfeature.ThisfeatureenablesthegatewaytoallowordenyconnectionfromwirelessclientbasedontheMACaddress.
Synopsis:
wlanmacfilter[--mode<disabled|allow|deny>]
[--add<MACaddress>]
[--remove<MACaddress>]
Options:
--mode<disabled|allow|deny>
Description:DisableandsetthewirelessLANMACfiltermode.
ValidValue:
Disabled:disablewirelessLANMACfilter
Allow:onlyallowaccesstowirelessclientwiththeMACaddresslistedinthegateway
Deny:allowallwirelessclienttoconnectunlesstheMACaddressislistedinthegateway
DefaultValue:disabled
--add<MACaddress>
Description:addoneMACAddressentry
--remove<MACaddress>
Description:removeoneMACAddressentry
Note:ThesettingoftheMACfiltertakeseffectimmediately.Whensettingupthisfeaturethroughthewirelessinterface,becarefulofblockingthecomputer.
ChangingthemodewillmaketheMACaddresslistbereserved.
ToseethelistofMACaddresses,usethecommand“wlaninfo–macfilter”.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE108
eXAMPLe3 :Afterexample2,theuserwanttoallowonlywirelessclientwithMACaddressof00:11:22:33:44:55tobeabletoconnecttothegateway
wlanmacfilter--modeallow--add00:11:22:33:44:55
Followingthecommandabove,iftheuserwantstodenywirelessclientwithMACaddressof00:11:22:33:44:55tobeabletoconnecttotheAP.
wlan macfilter --mode deny
ConfigureWirelessBridge(WirelessDistributionSystem/WDS)
Description:configurethewirelessbridge
Synopsis:
wlanwds[--mode<ap|wds>][--restrict<enabled|disabled>]
[--rmac1<MACaddress>][--rmac2<MACaddress>]
[--rmac3<MACaddress>][--rmac4<MACaddress>]
Options:
--mode<ap|wds>
Description:configurewirelessAPmode.
Defaultvalue:ap
--restrict<enabled|disabled>
Description:enableordisablebridgerestrictmode.
Defaultvalue:disabled
--rmac1<MACaddress>
--rmac2<MACaddress>
--rmac3<MACaddress>
--rmac4<MACaddress>
Description:setremotebridgeMACaddress
Note:The“--restrict”optionhavetobeenablebeforesettinganyrestrictMACaddress(--rmac1~4)ortherestrictMACaddresssettingwillbeignored.
ThebehaviorofWDSissimilartoconnectingtwoormoreAPusingahub.However,pleasebeawareoftheIPassignmenttopreventassigningtwoormorehosts/STAstothesameIPaddress.ToavoidIPaddressconflict,onlyenableDHCPserverinonegatewayanddisabletheothergatewayDHCPserver.
WDSCLI(commandlineinterface)doesNOTsupportenable(Scan)modeinBridgeRestrictwhileusingWUI(WebUI)does.WhenBridgeRestrictsettoenable(Scan)modeinWUI,theCLIwillshowBridgeRestrictdisabled.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 109
eXAMPLe4 :After example 3, the user want to connect another AP which has DHcP disabled and the mAc addressis00:12:34:56:78:9a
wlanwds--modewds--restrictenabled--rmac100:12:34:56:78:9a
ShowwirelessLANinterfaceconfigurations
Description:showthecurrentconfigurationofthewirelessLANinterface
Synopsis:
wlaninfo[--config][--security]
[--macfilter][--wds][--station]
Options:
--config
Description:displaythelistofparametersfromconfigoption
example:
>wlaninfo--config
WlanConfigInfo:
Basic:
wlanconfigenable=1
wlanconfighide=0
wlanconfigssid=Series7Wireless7890
wlanconfigbssid=00:11:22:33:44:56
wlanconfigcountry=AU
Advance:
wlanconfigisolate=0
wlanconfigband=b
wlanconfigchannel=0
wlanconfigrate=0
wlanconfigmrate=0
wlanconfigbrate=default
wlanconfigrts=2347
wlanconfigfrag=2346
wlanconfigdtim=1
wlanconfigbeacon=100
wlanconfigxpress=off
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE110
wlanconfiggmode=auto
wlanconfiggprotect=auto
wlanconfigpreamble=long
3G10WVT-HSPA7.2MbpsWi-FiGatewaywithVoiceUSeRGUIDe
--security
Description:displaythelistofparametersfromsecurityoption
example:
>wlaninfo--security
WlanSecurityInfo:
wlansecurityauthmode=psk
wlansecuritywpa=aes
wlansecuritywpaGTkRekey=0
wlansecuritywpaPresharedkey=1234567890
wlansecurityWepstate=disabled
wlansecurityWepkeyBit=128
wlansecurityWepkey2=
wlansecurityWepkey3=
wlansecurityWepCurrentkeyindex=1
--macfilter
Description:displaythelistofparametersfrommacfilteroption
example:
>wlaninfo--macfilter
WlanmacfilterInfo:
wlanmacfiltermode=disabled
wlanmacfilterentry:
--wds
Description:displaythelistofparametersfromwdsopiton
example:
>wlaninfo--wds
WlanwdsInfo:
wlanwdsmode=ap
wlanwdsrestrictmode=disabled
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 111
--station
Description:displaythelistofauthenticatedwirelessstationsandtheirstatus
example:
>--wlaninfo--station
--wlaninfo--station:notfound
ConfigureAccessControl
Description:tolistandtoconfigureaccesscontrolfromLAN&WAN.
(1)Tosetuptheaccesscontrollist.
Synopsis:remoteaccessservice[--service<servicename>]<--interface<none|local|remote|both>>
<servicename>:FTP,HTTP,ICMP,TeLNeT,SSH,TFTP
<none|local|remote|both>:
• none:disabletheservice.
• local:enabletheserviceatLANsideonly
• remote:enabletheserviceatWANsideonly
• both:enabletheserviceatbothLANandWANsides.
(2)ToaddanentryofIPrangethattobeenabletomanagethegateway.Subnetmaskof255.255.255.255isforahostwiththespecificIPaddress.
Synopsis:remoteaccessiprange--add<IPaddress><Subnetmask><none|local|remote|both>
<none|local|remote|both>
• none:forbidtheIPrangetomanagethe3G10WVT.
• local:permittheIPrangetomanagethe3G10WVTfromLANsideonly.
• remote:permittheIPrangetomanagethe3G10WVTfromWANsideonly.
• both:permittheIPrangetomanagethe3G10WVTfrombothLANandWAN.
(3)TodeleteanentryofIPrangethattobeenabletomanagethegateway.
Synopsis:remoteaccessiprange--remove<IPaddress><Subnetmask>
(4)ToenableordisablethealltheIPrangesdefinedbycommand(2).
Synopsis:remoteaccessaccesscontrolmode<--enable<0|1>>
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE11�
*Argument--enable1istoenabletheaccesslist;argument--enable0istodisabletheaccesslist;.Pleasenote(a)enablingaccesslistmodeisonlyforthecaseofatleastoneIPlistiscreated;(b)afterremovingthelastentryinthetable,theaccesslistmodewillbedisabledautomatically.ThisistoavoidnoIPbeingonthelistwhenaccessmodeisenabled;itwillcausethegatewaynobeingabletobemanagedbyanyIPaddress.Theonlysolutionunderthiscircumstanceistoreset3G10WVTTgatewaybacktofactorydefaultbypresstheresetbuttononthebackofthegatewayforover8seconds.
(5)Todisplayallcurrentsettingsforremoteaccess.
Synopsis:remoteaccessshow
(6)Toviewtheusageof“remoteacesss”command.
Synopsis:remoteaccess–help
configAPmode.
Defaultvalue:ap
--restrict<enabled|disabled>
configbridgerestrictmode.
Defaultvalue:disabled
--rmac1<MACaddress>
--rmac2<MACaddress>
--rmac3<MACaddress>
--rmac4<MACaddress>
configremotebridgeMACaddress
NOTe4 :Youshouldenabletheoption-“restrict”beforesettinganyrestrictMACaddress(setting--rmac1~4)oryourrestrictMACaddresssettingwillbeignored.
Aftertheversion–C40_R01,thewirelessdriver–3.91.15.0supportsbothBCM4318andBCM4306;Version-C39_R02withthewirelessdriver-3.61.13.0supportsonlyBCM4306;
ThebehaviorofwdsissimilartoconnecttwoormoreAPusingahub,beawareoftheIPassignmenttopreventassigningtwoormorehosts/STAstothesameIPaddress.YoucouldenableonlyoneDHCPserverinonegatewayanddisableallother’stoavoidtheconflictoftheIPassignment.
WDSCLIdoesNOTsupportenable(Scan)modeinBridgeRestrictwhileWeBdoes.IfyousetBridgeRestricttoenable(Scan)mode,theCLIwillshowBridgeRestrictdisabled.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 113
eXAMPLe4 :After example 3, we want to use wds to connect with the other AP which has disabled the DHcP server(NOTe4)andhasMACaddress-00:12:34:56:78:9a;wecanachievethegoalusingthefollowingcommand.
wlanwds--modewds--restrictenabled--rmac100:12:34:56:78:9a
info:ShowtheconfigurationsofWLANinterfaceandtheinformationofstationsconnectedtothisAP.
Options for the info command
wlaninfo[--config][--security]
[--macfilter][--wds][--station]
--config
listparametersofconfigcommand
--security
list parameters of security command
--macfilter
list parameters of macfilter command
--wds
list parameters of wds command
--station
list authenticated wireless stations and their status
NOTe5 :Youcanusethiscommandtoviewyourwirelesssettings;nomatterthesettingsaremodifiedfromweborCLI,thecommandwillshowthelatestinformationforyou.
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE114
eXAMPLe5 :Afterexample4,ifweforgotourssid,wecanviewthessidwiththefollowingcommand.
wlaninfo--config
--help:DisplayusageforWLANinterface.
Scenario2toconfigureAPwithOPeN-disabledsecurity:
wlanconfig--enable1--ssid“WLAN_TLF”--hannel8
wlan security open --wep disabled
Scenario3toconfigureAPwithShred-WePsecurity
wlanconfig--enable1--ssid“WLAN_TLF”--hannel8
wlansecurityshared--wepenabled--nkey11234567890123--keyidx1
Scenario4toconfigureAPwith802.1Xsecurity
wlanconfig--enable1--ssid“WLAN_TLF”--hannel8
wlansecurityradius--rasip172.16.2.199--raskey“whatever”--wepenabled
Scenario5toconfigureAPwithWPA-PSksecurity
wlanconfig--enable1--ssid“WLAN_TLF”--hannel8
wlansecuritypsk--pskey“123456789”--wpaencaes
Scenario6toconfigureAPwithWPA2security
wlanconfig--enable1--ssid“WLAN_TLF”--hannel8
wlansecuritywpa2--rasip172.16.2.199--wlPreauth1
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE 115
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE116
TECHnIC AL SUppORT:
Telst ra Bus ine ss Broadband:
1800 655 744
Top Related