Making Waves...
Sematron UK Ltd. Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GXT +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E [email protected]
sematron.com
Making Waves...
RF & Microwave Components
Timing, Test & Measurement
IP Networks
Satellite Communications
Broadcast
Solutions
Support
Timing, Test & MeasurementShort Form Brochure
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected] 3
Other divisions
Satcomms & BroadcastRF & Microwave ComponentsIP NetworksSolutionsSupport
Timing, Test & Measurement
Contents Communication Test Sets PageGeneral Dynamics 6Microwave AmplifiersGiga-tronics 7Microwave Frequency CountersPhase Matrix 9Microwave SynthesisersPhase Matrix 9Motion Simulation & MeasurementNorth Atlantic Industries 11Optical Test EquipmentExfo 5OscilloscopesLeCroy 8Power MeasurementGiga-tronics 7Tegam 11TTi 11RF & Microwave AnalysersAnritsu 4TTi 11RF & Microwave Signal GenerationdBm 5Giga-tronics 6Tabor Electronics 10Satellite Link Emulation & Noise GenerationdBm 5Timing SolutionsSymmetricom 10
Sematron customers around the world
Partners
Vector Network and Spectrum Analysers.
Satellite Link Emulators, Carrier to Noise Generators, Microwave Synthesisers
Optical Test Equipment and Multi Platform Datacom Testers
Communication Analysers and Radio Test Sets
Microwave Signal Generators, Power Meters and Sensors, Amplifiers, Switching Systems and YIG Oscillators
Digital Oscilloscopes
Angle Position Indicators, Synchro Resolvers & Phase Voltmeters
Microwave Frequency Counters, Microwave Synthesiser, VCO’s, Phase Locked Oscillators
Frequency Standards, Time & Frequency Receivers, Distribution Amplifiers, Phase Noise Test Sets
Arbitrary, Pulse & Function Generators
Handheld Spectrum Analysers, USB Power Meters, RF Signal Generators
Calibration Equipment, Resistant Standards, Ohm & Power Meters
Sematron is the UK’s largest independent supplier of Timing, Test & Measurement equipment. Over the past 20 years we have built a substantial portfolio and a reputation as a supplier of RF and Microwave test equipment and components. We have been designing, supplying and implementing solutions globally for the Telecoms & Enterprise, Defence & Avionics, New Media & Broadcast and Mobile & Wireless sectors.
In Satellite Communications we are the largest supplier of equipment for ground stations and the largest UK distributor for Timing, Test and Measurement equipment.
Our Network products help build infrastructure, monitor performance and can provide optimisation. In Broadcast, within the Contribution and Distribution sectors; our extensive range of compression, transmission and Satellite News Gathering (SNG) products have proven reliability and keep pace with customer’s requirements and the latest technology.
High-quality, high-performance RF, microwave and digital components complete our product portfolio.
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected]
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected] 5
Anritsu’s core business is test and measurement instruments for communications. Used in design, manufacturing and maintenance of wired or wireless solutions, RF and microwave solutions and optical solutions, among other data communications applications
Vector Network Analyser
Handheld VNA Master™
VNA Masters are the first and only truly portable handhelds with integrated 2-port vector network analyser from 2MHz to 6GHz, spectrum analyser from 100kHz to 7.1GHz, and power meter capabilities in a single instrument.
Model: MS2034A/MS2036A 2MHz to 4GHz/ 6GHz High Performance Vector Network Analyser
Power Meter Analysis
Vector Corrected 1-port and 1-path 2-port measurements
Vector Voltmeter replacement
Spectrum analyser
USB/Ethernet for data transfer
Store 1000 traces and setups in internal memory
Memory card slot for data storage and transfer
Model: MS2024A / MS2026A 2MHz to 4GHz/6GHz Vector Network Analyser
2 ms/data points sweep speed
USB/Ethernet for data transfer
Store 1000 traces and setups in internal memory
Memory card slot for data storage and transfer
Built-in and custom editable Cable and Signal Standard List
Automate repetitive tasks with remote programming via Ethernet connector
Spectrum Analyser
Model: MS2726C Handheld Spectrum Analyser with Frequency Coverage from 9kHz to 43GHz
Broadband preamplifiers over the whole frequency range for increased sensitivity around 20 dB
Three Sweep Modes – with improved Sweep Speed - up to 100 times faster
Resolution Bandwidths from 1Hz to 10MHz
New triggering choices including hysteresis, hold-off, and delay
More zero-span capabilities including 10MHz RBW & VBW
Enhanced Spectrum Analyser GUI including large marker display choice
Choice of display options for readability – normal, black and white, night vision, high contrast
On-screen Interference Mapping as part of the Interference Analysis option
LTE Measurements up to 20MHz
30 MHz Wide Zero-Span IF Output at 140MHz center frequency for external demodulation of virtually any other wideband signal
Model: MS2712E / MS2713E Spectrum Master Compact Handheld Analyser 100kHz to 4GHz & 6GHz
The MS2712/13E allows you to monitor, locate, identify, and analyse a broad range of cellular, 2G/3G/4G, land mobile radio, Wi-Fi, and broadcast signals. With a rich array of configuration options.
High Accuracy Power Meter,
2-port Transmission Measurements, Channel Scanner, GPS
Field-proven design: Three-hour battery life, rugged, compact, lightweight, daylight viewable display
Intuitive menu-driven touch screen user interface
Transmitter Verification: occupied bandwidth, channel power, adjacent channel power ratio
Interference Analysis of cellular system, land mobile radio systems, Wi-Fi
Signal Strength Mapping
Field analysis of 2G/3G/4G signals
Bandwidths of 40MHz, 60 MHz, 100MHz, maximum connectivity for maximum field-testing efficiency
The result of EXFO’s time-proven expertise in portable platform design, the FTB-1 Platform is an open testing solution for network infrastructure construction and troubleshooting. The FTB-1’s built-in intelligence empowers frontline technicians to take field-testing efficiency to the next level.
Optical Variable Attenuator FVA-600
Optical Light Source ELS-50
Optical Power Meter EPM-50
Multi Platform Testers
Portable Test Sets FTB-200, FTB-500, AXS-200
Provides boundless capabilities and expert multi modular platform design for true next-generation network testing. Testers available from one to eight expansion slots. Combines single mode and multimode fiber test functionalities, ideal for FTTx, metro/access and long-haul network testing. Modules ranging from OTDRs and loss testers to SONET/SDH and Ethernet analysers.
dBm develops and manufactures test equipment and subsystems for the RF marketplace, including wireless telecommunications, satellite systems, and military applications. Our test equipment product lines include Synthesised Signal Generators, Satellite Emulation Systems, Frequency converters and Carrier to Noise Generators.
Satellite Link Emulator – SLE
The SLE9000 Satellite Link Emulator series provides satellite-to-satellite, satellite-to-moving station (aircraft, UAV, vehicle) and satellite-to-fixed ground station RF link testing. The SLE allows accurate simulation of phase continuous propagation delays, flat fading, path loss, phase shift and Doppler shifts whilst giving realistic, full-duplex path scenarios for closed-loop testing of satellites, ground processing equipment, and mobile transceivers. Optional 6-path multipath fading (Rayleigh and Rician fading), and digitally generated Additive White Gaussian Noise (AWGN) may also be selected.
Up to four independent channels per chassis
Bandwidths of 20MHz, 72MHz, 125MHz (250MHz to follow)
140MHz or 70MHz IF depending on bandwidth selected
Internal L-band RF up/down converters
Optional internal carrier to noise generator
Carrier Noise Generators– CNG
The CNG series from dBm is a complete line of fully automated carrier to noise generators that sets and maintains a highly accurate ratio between a user supplied carrier and internally generated White Gaussian noise. The instruments operate over a wide range of power levels and are compatible with both digital and analog modulation formats.
THE CNG automatically sets and maintains extemely accurate C/N ratios by combining internally generated Additive White Guassian Noise with the user’s signal.
Synthesised Signal Generator
The SSG provides a low noise, fast settling, CW output from 10MHz to 4GHz. These high performance generators are a fraction of the size and cost of most generators. Easy to use, lightweight, and takes up very little space. Front panel programming of frequency and amplitude. LAN, GPIB, and RS232 interfaces.
EXFO is a leading provider of test and monitoring solutions for network service providers and equipment manufacturers in the global telecommunications industry. The Telecom Division offers innovative solutions from design to technology deployment and onto service assurance – and covering all layers on a network infrastructure to enable triple-play services and next-generation, converged IP networking.
Optical Network Testers
Optical Test Equipment
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected]
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected] 7
USB Power Sensors
GT-8551A, GT-8552A, GT-8553A, GT-8554A, GT-8888A
Frequency from 100MHz to 26.5GHz
CW, Pulse & Modulation Measurements available
Dynamic Range –60 to +20 dBm (depending on sensor)
Connector Type N(m), sma(m)
Microwave Amplifiers
The Giga-tronics Microwave Power Amplifiers offer linear high-power amplification across multi-octave bands. Ideal for testing in EMC, wireless communications applications and Defense EW systems. The GT-1000A with 2 GHz to 20 GHz and GT-1050A with 2 GHz to 50 GHz frequency range allows broadband testing without band switching or swapping narrow band amplifiers resulting in faster and more accurate testing.
Model GT-1000A Microwave Power Amplifier 2GHz to 20 Hz
Model GT-1020A Microwave Power Amplifier 100MHz to 20GHz
Model GT-1040A Microwave Power Amplifier 10MHz to 40GHz
Model GT-1050A Microwave Power Amplifier 2GHz to 50GHz
Power Measurement
Power meters and sensors
8650C Universal
Frequency Range: - 100kHz to 40GHz (depending on sensor)
Power Range: -70 to +47 dBm (depending on sensor)
Linearity: ±0.02 dB : Uniform sample rate = 20MHz
GPIB CW Measurement - up to >26,000 (rdgs/s): 20MHz Maximum Diode Sensor Video Bandwidth
Maximum CW Single Sensor Dynamic Range: 90 dB
Maximum Peak Power Sensor Rise Time 100 ns
Automatic Time Gate Setting
Direct Crest Factor Measurement
Statistical Power Measurement Analysis
Single and Dual Channel
8540C Universal
Frequency Range: 100kHz to 40GHz (depending on sensor)
Power Range: -70 to +47 dBm (depending on sensor)
CW, Peak, Modulation & True RMS sensors
Automatically measure average power of TDMA, GSM, and CDMA signals
Optional time setting
Achieve 500 reading per second over GPIB
Single and Dual Channel
8500A Peak Power Meter
Frequency range from 0.03 to 40GHz (dependent on sensor)
Rise time < 15 ns
Power Range: –20 to +20 dBm (pk)
Measurement resolution is 100 ps
Built-in power sweep calibrator with NIST traceable accuracy
Single and Dual Channel
R8000 Communications System Analyser
The new R8000 Communications System Analyser provides the benchtop functionality of more than 16 communication test instruments combined into one compact, lightweight unit.
Offering full analogue capability to meet todays needs with an ungrade to digital for tomorrow
Optional 3GHz frequency extension
High performance spectrum analyser with markers
PL, DPL, DTMF, 2-5-6 Tone
Pocsag, ZVEI, user defined
Sensitive measurement receiver
Eight instrument meters
Light and portable
MOTOTRBO
NXDN
P2S
R2600 Series – For Conventional Radio, Paging Service, and Trunked Radio SystemsIf you service conventional two-way radio or one-way paging, the value-packed R2600 is the product for you. Becuase of its unique design, the R2600 allows you to perform numerous complex functions with the same piece of equipment. This “one-box” design is especially useful in remote sites or where use of multiple pieces of heavy equipment are impractical - or impossible.
R2625B - Econimical APCO Project 25 Solution
R2660 - iDENTM Digital Communications System Analyser
R2670 - Expandable Platform for Digital, Trunked and Secure Testing
R2680 - MPT1327 Trunking Communications System Analyser
General Dynamics SATCOM Technologies manufactures a comprehensive line of full-featured Communication System Analysers. The R8000 utilises leading-edge software defined radio technology to deliver a previously unimaginable result: a truly portable instrument with more functions than today’s benchtop analysers.
Communication Analysers
Giga-tronics design and manufacture the best-in-class RF & Microwave signal generators, power amplifiers, power meters, USB power sensors, broadband switching matrices and high performance microwave signal processing.
Microwave Signal Generators
2500B
Frequency ranges - 100KHz to 50GHz with 0.001Hz resolution
Fast Frequency & Level switching time- < 550 μsec for ΔF0= 500 MHz
High output power: +13 dBm at 50 GHz
Full Suite of Analog Modulation
Low Harmonics, Low Spurious
Ultra Low Close in Phase Noise
2400C
Frequency ranges -10MHz to 40GHz with 0.001Hz resolution
Fast frequency and level switching time -< 550 μsec per step
High output power - +14 dBm at 20GHz
Low phase noise (standard): -109 dBc/Hz at 10 GHz and 10kHz offset
Excellent spectral purity Harmonics < -50 dBc
RF / Microwave Configurable Switching and Sub-systems
Series 8000 signal routing solutions are designed and built to customer specifications.
Giga-tronics can design a system to meet any switching configuration, including multiplexers, matrices, or a combination. A Series 8000 can also include signal conditioning elements such as combiners, splitters, and attenuators, or can be designed to meet critical RF/Microwave electrical specifications
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected]
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected] 9
LeCroy oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities - typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Digital Oscilloscope
WaveAce Oscilloscopes
The WaveAce™ combines long memory, a colour display, extensive measurement capabilities, advanced triggering and excellent connectivity to improve troubleshooting and shorten debug time. With bandwidths from 40MHz to 300MHz, sample rates up to 2 GS/s and waveform memory up to 10 kpts/Ch (20 kpts interleaved) the WaveAce exceeds all expectations of a small affordable oscilloscope.
WaveJet 300 Oscilloscopes
The WaveJet 300A provides the banner specifications, feature set and user interface to simplify how you work and shorten debug time. With a big, bright 7.5” display, long 500 kpts/Ch memory and up to 2 GS/s you will easily capture and see every detail of your waveform. The USB ports provide a quick way to save waveforms, store or print screen captures or connect to a PC. Math and measurement tools help you understand the waveforms and Replay mode allows you to look at a history of what has been captured.
WaveSurfer Oscilloscopes
With up to 10 GS/s sample rate and 25 Mpts of memory WaveSurfer can capture large amounts of data at very high sample rates. Other oscilloscopes offer long memory but they bog down trying to process or display it. WaveSurfer handles large amounts of data quickly providing fast processing of long memory even when using math and measurement functions. The software responds immediately to the user inputs even while processing data
The WaveSurfer oscilloscopes pack high performance hardware, powerful waveform processing and advanced math, measurement and debug tools into a compact form factor with a large touch screen display and intuitive user interface.
North Atlantic offer a wide range of benchtop & VXI-based motion simulation and measurement instruments for the Aerospace, Industrial, Laboratory and Defense industries. Our innovative and highly reliable products provide best-of-breed performance for Synchro Angle Position Indicators, Phase Angle Voltmeters, Synchro/Resolver Simulators, Phase Measurement, Calibration Standards, and VXI Instruments.
Angle Position Indicators
8810A
High Accuracy, High Resolution touch screen
Two Isolated Input Channels
Three display modes 0-360± 180 or Degrees, Minutes, Seconds
0.0001° Resolution
0.004° Accuracy ( optional 0.001°5 Accuracy)
Auto Ranging Signal & Reference
47Hz to 20Khz Frequency Range
Optional 2.2 VA Internal Reference
Ethernet, USB, IEEE-488 and parallel ports
Direct replacements for all 8810’s
Synchro/Resolver Simulator
5330A
0.003° Accuracy at No Load
0.004° Accuracy at Full Load
Frequency 47Hz to 10kHz
Programmable Output Voltages
Optional 2.2 VA Internal Reference
Ethernet, USB, IEEE-488 and parallel ports
Phase Angle Voltmeters
2250A Phase Angle Voltmeter
Voltage ranges 50 mV rms – 500 Vrms
Input impedance 2 meg ohms
Frequency range total: 10Hz – 1MHz
Voltage resolution 5 digits
Phase input ranges 0.00° – 359.99°
Phase resolution 0.0001°
Ethernet, USB, IEEE-488, & LXI compatible
Phase Matrix, Inc. designs and manufactures radio requency (RF) and microwave test and measurement (T&M) instruments and components and is an independent, privately held California-based corporation.
Microwave Frequency Counters
25B & 28B
Frequency range 10 Hz to 20GHz / 26.5GHz
Measure frequency and power level with a single connection
Analyse individual signals in a multi-channel spectrum
200 watts peak input protection
Ideal for field maintenance and benchtop applications
Worldwide proven reliability
545B & 548B
Count Carrier and IF Frequencies from 10Hz to 20GHz / 26.5GHz
Power Measurement to 0.1 dB resolution
200 Watt (+53 dBm) peak damage protection
200msec acquisition time
Up to 800MHz/sec tracking speed
20 MHz P-P FM tolerance up to a 10 MHz rate
Microwave Frequency Counters with source locking
EIP 575B and 578B
Source Locking CW Microwave (110GHz optional)
Frequency Counters with Selective Power Measurement
Frequency Range of 10MHz to 20GHz / 26.5GHz (110GHz optional)
200 Watt (+53 dBm) peak damage protection
200msec acquisition time
20MHz P-P FM tolerance up to a 10MHz rate
Microwave synthesiser delivers instrument–grade performance, increased functionality, and efficient power consumption at a reduced size and low cost.
Model: FSW-0020
Range: 0.1-20GHz
Resolution: 0.001Hz
Switching Speed: 100 μS
Levelled Power: +13 dBm (Max)
10KHz Phase Noise: -116 dBc/Hz @ 20GHz
Spurious -60 dBc
Model: FSW-0010
Range: 0.1-10GHz
Resolution: 0.001Hz
Switching Speed: 100 μS
Levelled Power: +15 dBm (Max)
10KHz Phase Noise: -122 dBc/Hz @10GHz
Spurious -70 dBc
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected]
sem
atro
n.co
m
T +44 1256 81 22 22 F +44 1256 81 26 66 E [email protected] 11
TTI offers a range of specialised test equipment including Signal Generators, Spectrum Analysers and USB Power Meters.
PSA2701T Low Cost Handheld Spectrum Analyser 2.7GHz
1MHz to 2.7GHz frequency range
Resolution bandwidths of 1MHz, 280kHz or 15kHz
-96dBm typical noise floor at -20dBm reference level
Sweep modes of normal, single, peak hold and average
Zero span mode with AM and FM audio demodulation
Twin markers with readout of absolute & difference values
GR2050 - 150 kHz to 2GHz RF Signal Generator with AM, FM and Phase Modulation
150kHz to 2GHz frequency range
10 Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-127dBm to +7dBm amplitude, 0.1dB steps
AM, FM and Phase modulation, internal or external
TGR1040 - 10MHz to 1GHz RF Signal Generator with FM Modulation
10MHz to 1GHz frequency range
1kHz setability, +/-2ppm frequency stability
-127dBm to +7dBm amplitude, 0.1dB steps
FM modulation, internal or external
TTI Thurlby Thandar Satori ST series USB Power Meters – 12.4GHz, 18.5GHz or 26.5GHz
Three models 12.4GHz, 18.5GHz or 26.5GHz
Measurement down to 10MHz
Measurement range from –50 dBm to +20 dBm
Replacement solution for conventional power meter and sensor combination
Simple USB connection to laptop or PC
Use multiple sensors on one laptop or PC
Tabor has an extensive product portfolio includes, pulse, function and arbitrary waveform generators, waveform creation software and more, in various platforms, interfaces and frequency ranges. Technologically advanced, featuring the highest levels of performance, reliability, and most of all, price-competitive, they are sought-after in a diverse array of applications
WS Series Arbitrary Function Generators
Single / Dual-channel Arbitrary / Function Generator
Up to 250MHz sine and 150MHz square waves
16 Vp-p into 50Ω, 32Vp-p into open circuit
Up to 625MS/s with up to 16-Bit and 512 Kpoint arbitrary waveforms
Linear & logarithmic sweeps, triggered, gate and burst
AM, FM, FSK, and PSK modulation Ethernet, USB and GPIB interfaces
WW Series Arbitrary Waveform Generators
50, 100, 250 and 1,200MS/s Versions
1, 2 or 4 Channel versions
Up to 16 Bit Vertical Resolution
Up to 14 Digits Frequency Resolution
Up to 16 M Waveform Memory
Sophisticated Memory Management
Digital Pattern Outputs
AM, FM, Arbitrary FM&AM&PM, FSK, (n)PSK, (n)QAM, Frequency Hops and Sweep Modulation
PM Series Pulse Waveform Generators
“Drop-in” replacement for out-of-order Agilent, Fluke, HP, LeCroy, Tabor, Tek and WaveTek Pulse and Function Generators
50MHz Single or Dual Channel Pulse / Pattern generator
100MHz Function Generator for standard waveforms
300 MS/s, 16Bit Arbitrary Waveform / Sequence Generator
10ps pulse resolution with 4ns transition time (3ns typical)
32Vpp into open circuit with programmable output impedance
Internal PWM modulation and External Width control
Symmetricom is the world leader in generation, synchronisation and distribution of precise time and frequency signals. Their products provide the precise frequency, timing, and distribution that assure the performance, enable the management and facilitate the deployment of next-generation networks.
8040C Rubidium Frequency Standard
Six or 12 Configurable Outputs
RF & Pulse Outputs
AC Input
Remote Monitoring & Control
GPS Disciplining
XL-GPS High Value, Network Managed Time and Frequency Receiver
12 Channel GPS Receiver with TRAIM
Accurate to 30 Nanoseconds RMS to UTC (USNO)
Frequency Accuracy to 1x10-12 (long term)
Time Code Input/Output (IRIG A,B; IEEE 1344, NASA 36)
10MHz Frequency Reference Output
6502B 10 channel, RF distribution amplifier
Low Phase Noise
High Channel Isolation (>100dB)
Ten Channel Output Distribution
Daisy Chain For More Than 100 Outputs
Frequency accuracy to 5 x 10-13
Long-term stability better than 1 x 10-14
Easy to use with automatic startup and intuitive menu structure
Proven Reliability
Symmetricom’s Digital Phase Noise & Allan Deviation test sets
Symmetricom’s digital Phase Noise & Allan Deviation test sets make accurate single sideband (SSB) phase noise and ADEV measurements between 1 – 400MHz at the click of a button, all at a fraction of the cost of alternative solutions. They are the most accurate phase noise and ADEV test sets in the industry providing phase noise measurement accuracy down to previously impossible levels of ±1.0 dB.
TEGAM is internationally recognised for its offering of RF power sensor calibration systems, RF attenuation measurement systems, resistance standards, ratio standards, and ohm meters. In addition, the company’s supplies LCR meters/impedance bridges, arbitrary waveform generators, high-voltage amplifiers, MEMS engine driver systems, handheld thermometers, humidity meters, and other test and measurement solutions. In the past year TEGAM has introduced several exciting new products, including a PXI amplifier and an RF Power Meter.
10 MHz to 18 GHz Feedthrough Power Standard F1109
Used to calibrate RF Power Sensors in the 10MHz to 18GHz frequency range
Standards are directly traceable to NIST
Thermistor Standards are temperature controlled
Optional A2LA Accredited ISO/IEC 17025:2005 Compliant Calibration
RF Thermistor Power Meter 1830A
Replaces the HP432 RF Power Meter
Compatible with thermistor power sensors from: Agilent (HP), TEGAM, Weinschel, Hughes, General Microwave, Millitech
Supports 100 Ω and 200 Ω thermistors
Integrates bridge balancer and power meter into one package
Four digit calibration factor resolution
Full remote programmability
Heater control for ovenised sensors
Lowest uncertainty
Dual Type IV Power Meter 1806
High power model for CATV and Telco Traceable to primary voltage and resistance standards
Internal temperature controller
Compatible with Agilent (HP) 200 Ohm thermistor mounts and all TEGAM (Weinschel) RF Power Standards
Internal reference voltage generator for more precise measurements
Fault indicator illuminates when loop balance is prevented
One-year warranty
Optional A2LA Accredited ISO/IEC 17025:2005 Compliant Calibration
Making Waves...
Sematron UK Ltd. Sandpiper House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8GXT +44 (0) 1256 812 222 F +44 (0) 1256 812 666 E [email protected]
sematron.com
Making Waves...
RF & Microwave Components
Timing, Test & Measurement
IP Networks
Satellite Communications
Broadcast
Solutions
Support
Top Related