Traffi c management, site safety and security products
Innovation For Safety
201608 678 888 Contents
UK Streetworks Image ................................ 2
Road Cones ................................................. 3
Highwayman Cones
E-Cones
No Waiting Cones - Warden
No Waiting Cones - Conical
Oxford Cone Rope
Water Filled Barriers ................................... 6
Oxford Strongwall Barrier
Strongfence
Fencing Couplers
Oxfordwall Barrier
Oxfordwall Combi Barrier
Blow Moulded Barriers ............................... 9
Oxford Avalon Barrier
Barrier with Non Trip Foot ....................... 10
Clearpath Foot
Fencing ...................................................... 11
Endura 2m Fence
Folding Barriers ........................................ 12
Oxford Vim Barrier Safegate Barrier
Safefold Barrier
Watchman Barrier
Pop Sign .................................................... 13
Covers & Road Plates ............................... 14
Oxford 15/5 Road SafePlate
Radlock
Oxford 15/5 Road SafePlate Flexi
Trenchpin
Oxford Low-Pro
16/12 SafeCover
12/8 SafeCover
Safekerb Ramp
Speed Ramps & Roadways ...................... 17
EnduraMat
Speed Ramp
Clear Path Safe Walk
Clear Path Walkway
General & Trade Mouldings .................... 18
Trade Mouldings
Eurobase
Square Base
Scaffold Products
Fence Feet and Accessories .................... 19
OxBlock
Octagonal Base
SnapFit Refl ective Boards
Focus on Health and Safety ..................... 20
Barrier Wind Test Data
Barrier Load Test Data
Reduced Trip Hazard Barriers
Anti-climb Barriers
Environmental Policy ................................ 22
Terms and Conditions .............................. 22
Contacts .................................................... 23
Oxford Plastic Systems
Oxford Plastic Systems are the UK’s leading manufacturer of road cones and
barriers for the Traffi c and Construction Industries. The company also designs
and manufactures custom-designed mouldings using a wide range of materials
including polyethylene, PVC and glass fi bre.
Enquiries are welcome and our products often provide signifi cant advantages
over traditional solutions since they can be moulded into a wide variety of
shapes of up to 50kgs weight and 3m wide. The materials we use are available in
different densities to allow moulding of either lightweight or quite heavy units.
The modern factory is located near Chipping Norton in Oxfordshire, England
allowing rapid despatch to distribution centres around the world. We have
a number of different machines on site to allow us to use the appropriate
moulding technique for each project.
www.oxfordplastics.com
01608 678 [email protected]
Oxford Plastic Systems Ltd Unit T2, Enstone Business ParkEnstone, Oxfordshire OX7 4NP United Kingdom
www.oxfordplastics.com3
UK STREETWORKS
Pop SignPop SignLow-ProLow-Pro
Highwayman ConeHighwayman Cone
Strong-FenceStrong-FenceStrong-FenceSafeplateSafeplateSafeplate
Avalon BarrierAvalon BarrierAvalon Barrier
Endura-FenceEndura-FenceEndura-Fence
Strongwall Strongwall Strongwall
UK Streetworks
401608 678 888
• Heavy duty road cones ideal for use in heavy traffi c areas such as motorway contrafl ow systems and lane delineation
• Meets all relevant regulations
• Available in 750mm and 1000mm heights
• Two-part design with a tough composite base top, complete with hand grips for ease of handling
• Available complete with EN13422 sleeves
• Twin band sleeves available for export for 1000mm and 750mm cones
• The 1000mm cone is also available in a lighter weight alternative designed specifi cally to meet the requirements of the export market
• Can be supplied with coloured bases for corporate identity, and embossed with company name or logo
Highwayman Cones• Heavy duty, 100% recycled cones
• Designed for maximum stability, ease of handling and storage
• Ideal for use in most traffi c control situations on roads and emergency works
• Available in 510mm, 750mm and 1000mm sizes
• Supplied with refl ective sleeves to meet EN13422
• Twin band sleeves available for export for 1000mm and 750mm cones
• Can be supplied with coloured bases for corporate identity, and embossed with company name or logo
E-ConesTwo Part
• Three sided cone design
• Base made from 100% fl exible compound, eliminating the need for extra weighting
• Lettering and logo can be incorporated into the moulding
No Waiting Cones – Warden
ROAD CONES
One Part
• 500mm
• No Waiting emblem with name or logo printed on the sleeve
• Sealed for weather protection
No Waiting Cones – Conical
www.oxfordplastics.com5
• Refl ective warning system
• Genesis Retrotex “Cone Rope” is a high visibility 3-ply textile rope combined with a 3M retrorefl ective component
• Available in 18m kits complete with breakpoints every 4.2m
• Also available in non-refl ective
Oxford Cone Rope
Highwayman ConeSPECIFICATIONS 1000mm 750mm
Part No 09100 09101
Total height 1000mm 750mm
Base width 540mm 465mm
Total weight 8kg or 6kg 5kg
Number per pallet 100 150
E-ConeSPECIFICATIONS 1000mm 750mm 510mm
Part No 025 023 024
Total height 1000mm 750mm 510mm
Base width 510mm 440mm 280mm
Total weight 7kg 4.5kg 1.8kg
Number per pallet 100 150 400
No Waiting – WardenSPECIFICATIONS One Part Two Part
Part No 09207 09200
Total height 550mm 550mm
Base width 409mm 409mm
Total weight 3.6kg 3.6kg
Number per pallet 200 200
Cone RopeSPECIFICATIONS
Part No 09940
Length 18m
No Waiting – ConicalSPECIFICATIONS
Part No 09209
Total height 510mm
Base width 275mm
Total weight 2.5kg
Number per pallet 400
ROAD CONES
Size and distance: Details of signs and cones safety zone dimensions
Type of RoadMinimum size of
signs (mm)Minimum height of cones (mm)
Sideways safety zone
Single carriageway road, restricted to 30mph or less
600 450 0.5m
Single carriageway road, restricted to 31mph to 40mph inclusive
750 450 0.5m
All-purpose dual carriageway road, restricted to 40mph or less
750 450 0.5m
Single carriageway road, with speed limit of 50mph or more
750 450 1.2m
All-purpose dual carriageway road, with speed limit of 50mph or more
1200 750 1.2m
Extract from Safety at Streetworks and Road Works – A Code of Practise
601608 678 888 WATER FILLED BARRIERS
• Base self weighted 20kg (recycled material)
• HD moulded top section can be water fi lled which will add a further 15kg
• Designed for compact stacking to provide low transport costs
• Base can be supplied in red, white and black
• Top section can be supplied in white. Orange as standard
• Corporate customisation available
• Refer to Wind Test Data
Oxford Strongwall BarrierOxford Strongwall BarrierSPECIFICATIONS
Part No 0628
Height 1000mm
Length 1080mm
Width 520mm
Total weight 24kg
Number per pallet 18 (Base and Gate)
Designed for compact stacking to provide low transport costs.
Quick and easy to install – minimal manpower required.
Corporate customisation available.
The locking system provides extra stability.
Stable and rigid enough for crowd pressure, to guard pedestrians from traffi c and prevent falls.
Once linked, Oxford Strongwall is diffi cult to dismantle by unauthorised personnel.
www.oxfordplastics.com7
WATER FILLED BARRIERS
• High Level (2 metre) anti-climb fence for deep excavations and hazardous sites
• Compliant with Chapter 8 Streetworks
• One man assembly
• Compact for transport by small vehicle
• Very stable, ideal for high wind situations
• Corporate colours and nameplating service available
• Entrance Gateways can be incorporated
• Tamper proof locking clamps available
• Refer to Wind Test Data
Oxford Strongfence
Easy to transport
Oxford StrongfenceSPECIFICATIONS
Part No 0633
Length 1000mm
Height 2000mm
Width 520mm
Number per pallet 9
Corporate customisation available.
Fencing Couplers
Plastic Fence CouplerSPECIFICATIONS
Part No 0667
Super stable back stay
801608 678 888 WATER FILLED BARRIERS
High visibility traffi c control product
• The Oxfordwall is a substantial barrier that is easy to set up and link together. The barrier can be fi lled on site with water or sand for extra stability and is designed to stack very effi ciently which enables transport cost to be reduced
• Oxfordwalls are manufactured from UV stabilised polythene and are normally supplied in red or white but other colours are available on request. The Oxfordwall can be used at docks, airports and construction sites to ensure pedestrian guidance and safety
Oxfordwall Barrier• The Combi Barrier is a variation of the Oxfordwall barrier
• It comprises a series of uprights with attached planks that are fi xed to the top of the Oxfordwall barrier in pre-drilled holes to raise the overall height of the barrier
• This makes it more suitable for crowd control purposes
Oxfordwall Combi BarrierOxfordwall BarrierSPECIFICATIONS
Part No 09169
Length, end-to-end 1000mm
Height 605mm
Weight when empty 10kg
Weight when full 40kg
Width 510mm
Number per pallet 18
Oxfordwall Combi BarrierSPECIFICATIONS
Part No 09450/09451
Length, end-to-end 1000mm
Height 1035mm
Width 510mm
Weight when empty 10kg
Weight when full 40kg
Weight of Combi section 1.7kg
Number of wall per pallet 18
Number of Combi only 60m
www.oxfordplastics.com9
BLOW MOULDED BARRIERS
• Linking system design creates secure joints even on uneven ground
• Unlocked or locked mode confi gurations prevents unauthorised dismantling
• Complies with BS 7818 Specifi cation for pedestrian restraint systems making it ideal for event management and pedestrian control usage
• Also suited to construction applications around temporary excavations and road works
• Advertising signage, contractor information, warning signs and refl ective can be fi xed to front and back
Oxford Avalon Barrier
Oxford Avalon BarrierSPECIFICATIONS
Part No 0635
Total height with feet 1000mm
Total length 2000mm
Total weight 10kg
Number per pallet 50
The Avalon fl exible linking system is secure enough for even the most uneven surface.
• 2000mm 1 piece, high impact HDPE moulded barrier
• Hardwearing and durable
• Personalisation service available on request
• Refer to Wind Test Data
Link boards available to add extra stability
1001608 678 888BARRIER WITH NON TRIP FOOT
The Clearpath Foot has been designed to overcome the trip hazard to pedestrians presented by conventional barrier feet, hence keeping pavements and walkways clear.
The Clearpath Foot incorporates;
• Two-part low trip design
• HiVis HDPE front section
• Rear section of the foot is weighted to add extra stability
• Available for Avalon Barrier
• Refer to Wind Test Data
Clearpath Foot
Weight inserted in foot for extra stability
Oxford Avalon BarrierSPECIFICATIONS
Part No 0635
Total height with feet 1000mm
Total length 2000mm
Total weight 12kg
Number per pallet 50
www.oxfordplastics.com11
Endura 2m FenceSPECIFICATIONS
Part No 0668
Length 2000mm
Height 1900mm
Weight 10kg
Number per pallet 50
FENCING
• 2 metre high, anti-climb fence
• Designed to protect deep excavations (over 1 metre) and hazardous sites
• Integral refl ective panel and complies with Chapter 8 Streetworks
• Links directly with existing steel mesh fencing, using the same bases and clamps
• Easy one man assembly
• Compact design for transport by van and smaller vehicles
• Extremely durable and long lasting
Endura 2m Fence
Can be set to remove any trip hazard for pedestrians
No trip hazard for contractors site operators
Gated access points
Corporate colours
• Corporate colours and nameplating service available
• 100% recyclable
• 1 metre wide ‘gateway’ sections also available
• Refer to Wind Test Data
1201608 678 888 FOLDING BARRIERS
• Blow moulded self assembled 4 x 1 piece panels constructed from tough high density polythene
• Can be carried and deployed easily by one person
• Hinge design creates strong joints with minimal lateral movement
• Feet design incorporates long & short sides for reduced trip hazard without compromise to stability
• Compact design for easy storage and transportation in small vehicles
• Ideal for use in public works projects around temporary excavations, single holes and road works
• Personalisation service available on request
Oxford Vim Barrier
Oxford Vim BarrierSPECIFICATIONS 1.25m 1.50m
Part No 0640 0641
Total height 1000mm 1000mm
Total length 5000mm 6000mm
Total weight 19.6kg 22.8kg
Number per pallet 15 15
• Safegate barrier system comprises a set of high-visibility, hinged gates
• Conforms to Chapter 8 Regulations
• Ideal for use around manhole repairs, cable laying and other temporary excavations
• Can also be used to protect any area requiring temporary restriction of access, such as wet fl oors or cleaning work in progress
• Hinged clips enable fast, simple assembly of the 750mm x 1000mm gates in 1-way, 3-way or 4-way confi gurations
Safegate Barrier
Safefold BarrierSPECIFICATIONS 1.25m 1.50m 2.0m
Part No 09402 09403 09404
Barrier length 1250mm 1500mm 2000mm
Height 1030mm 1030mm 1030mm
Number per pallet 12 12 12
Safegate BarrierSPECIFICATIONS 1 way 3 way 4 way
Part No 09730 09731 09732
Total length 750mm 750mm 750mm
Total height w/feet 1000mm 1000mm 1000mm
Total weight p/gate 2.7kg 8.1kg 10.8kg
Number per pallet 60 25 20
• Safefold is a pre-assembled folding barrier system
• Ideal for use around temporary excavations and roadworks
• Conforms to Chapter 8 Regulations
• Can be carried and deployed easily by one person
• Available in 1250mm, 1500mm and 2000mm gate sizes
• Hard-wearing injection moulded hinges
• Planks are bolted to the hinges to give extra strength
• Barrier is fi tted with lamp brackets
• Other coloured posts available on request
• Bases available to add weight and stability
Safefold Barrier• The Watchman is a complete system made from high
density polyethylene
• Conforms to the Chapter 8 Regulations
• Constructed from any desired combination of bases, uprights and planks
• Versatile barrier suitable for controlling traffi c or crowds
• Lamps can be fi tted to uprights, and sit inside the post for protection
• Standard barrier features red posts and either 1250mm, 2000mm or 3000mm planks
• Other coloured posts or bases available on request
• Planks can also be screen printed for corporate identity and bases can be embossed with logos
Watchman Barrier
Watchman BarrierSPECIFICATIONS Base Post
Part No 017 09550
Width 455mm 100mm
Height 125mm 1150mm
Weight 4kg 950g
Number per pallet 75 150
www.oxfordplastics.com13
• Extremely tough all plastic sign
• Very compact stacking for easy transport
• Integral weighted base in 4 options from 4.5kg to 11.3kg
• No sand bags required
• Withstands gale force winds (refer to Wind Test Data)
• Fully recyclable
• Vandal proof; top `locks` into the base
• Can be customised with company name and stem colour
Oxford Pop Sign
Pop Sign – Triangular 750mmSPECIFICATIONS
Part No 0463 (Top only)
Total width 848mm
Total height with base 1052mm
Number per pallet 50
Total weight 4.5kg – 11.3kg
Pop Sign – Circular 750mmSPECIFICATIONS
Part No 0465 (Top only)
Total width 760mm
Total height with base 1012mm
Number per pallet 50
Total weight 4.5kg – 11.3kg
Base Weight Options – Large BaseSPECIFICATIONS
Part No 0460
Weight – Large Base no weights 2.8kg
Weight – Large Base with under weights 4.8kg
Base Weight Options – Small BaseSPECIFICATIONS
Part No 0461
Weight – Small Base no weights 1.5kg
Weight – Small Base with under weights 3.5kg
Base Weight Options - Over weightSPECIFICATIONS
Part No 0470
Weight 3kg
POP SIGN
1401608 678 888
• Hand gap for easy two man lift
• Retrorefl ective panels added for maximum visibility
• Ramp design helps slow down traffi c for increased safety
• Independently tested to 44 tonne HGVs (See website to view report)
• Single wheel load: 6000kg at 700mm trench width
• No trip hazard for pedestrians
• Permanent moulded non-slip surface
• Each roadplate is fi tted with heavy-duty steel linking brackets that lock easily and securely together
• End mouldings available
Oxford 15/5 SafePlate
Oxford 15/5 SafePlateSPECIFICATIONS SafePlate End Section
Part No 0812 0814
Length, end-to-end 1500mm 1500mm
Width 500mm 500mm
Weight 35kg 23kg
Number per pallet 20 20
• Trench pin system available to enhance lateral stability
• Made from composite material which has little scrap value making them a lower theft risk
• Reduced noise levels make them ideal for use in residential areas
• Standard colour yellow
• Can be embossed with company name and logo
A versatile, economical and safe alternative to metal roadplates
Can be installed manually and requires no machinery.
RADLOCK Systems has invented a secure design utilising existing plates and trench covers in order to improve street works site safety.
• Robust construction from steel and high grade plastic make it durable and hard wearing
• Prevents claims for damage / personal injury from falling down unsecured excavations
• Once in place it cannot be removed without the key
• Easily fi tted to most existing boards by just two bolts
Radlock
COVERS & ROAD PLATES
www.oxfordplastics.com15
COVERS & ROAD PLATES
• Modular Roadplate system
• Tested to a vehicle weight of 44 tonnes
• Easy 2 man lift
• Anti-slip surface
• New noise reduction fl exible edge
• New drop pin feature to increase stability
• Locked securely into position with Radlock locking system
• Compliant with Safe Working Practice
15/5 Oxford SafePlate Flexi End
DROP PINS PRUTRUDE DUE TO GRAVITY
Oxford 15/5 SafePlate Flexi EndSPECIFICATIONS Road Plate End Section
Length, end-to-end 1500mm 1500mm
Width 500mm 500mm
Weight 44kg 23kg
Number per pallet 20 20
COMING SOON
Trench pin system available to enhance lateral stability.
• New product which is available on our full range of Road Plates and Trench Covers
• Cut accidents and insurance claims
• Exclusive to Oxford Plastic Systems
Trench PinDROP PINS IN CONTACT WITH ROAD SURFACE RETRACT
PREVENTS LATERAL MOVEMENT OF SAFEPLATE
NARROW TRENCH
WIDE TRENCH
1601608 678 888COVERS & ROAD PLATES
16/12 Driveway BoardSPECIFICATIONS
Part No 0820
Length, end-to-end 1600mm
Width 1200mm
Depth 25mm
Weight 33kg
Number per pallet 25
12/8 Safe CoverSPECIFICATIONS
Part No 0307
Length, end-to-end 1200mm
Width 800mm
Weight 12kg
Number per pallet 30
Safekerb RampSPECIFICATIONS
Part No 0806
Length, end-to-end 1130mm
Height 75mm
Width 750mm
Weight 6kg
Number per pallet 20
• Designed primarily for use in street works
• Complies with the UK’s DETR Safety at Streetworks and Roadworks Code of Practice
• Moulded from a single piece of glass reinforced composite
• Measures 1600mm by 1200mm and weighs 33kg
• Designed to cover trenches of a maximum width of 900mm
• Slip resistant surface and chamfered edges to prevent tripping
• Underside has ribbed framework for added strength
• Can take the distributed weight of a vehicle of up to 2000kg
• Standard colour yellow (other colours are available)
• Can emboss with company name or logo
16/12 SafeCover• Designed primarily for use in street works
• Complies with the UK’s DETR Safety at Streetworks and Roadworks Code of Practice
• Moulded from a single piece of glass reinforced composite
• Measures 1200mm by 800mm and weighs 12kg
• Slip resistant surface and chamfered edges to prevent tripping
• Underside has ribbed framework for added strength
• Can take the distributed weight of a vehicle of up to 2000kg
• Standard colour yellow (other colours are available)
• Can emboss with company name or logo
• Designed to cover trenches of a maximum width of 700mm
12/8 SafeCoverThe SafeKerb provides safe means for wheelchair and pushchair users to reach the next level when a footpath has been closed for street works.
• Meets the ‘Wheel Chair Boarding Ramp Specifi cation’, the ‘Safety at Streetworks, Code of Practice’ and the ‘Disability Discrimination Act’
• Effective non-slip surface and raised sides
• Adapts to varying kerb or step heights (75mm to 150mm)
• Recommended maximum weight 250kg
• Stacks for transport and storage
• Made from HDPE
• Standard colour Yellow
• Can emboss with company logo
• Can be recycled
Safekerb Ramp
Oxford Low-ProSPECIFICATIONS
Part No 0825
Length 1125mm
Width 1125mm
Weight 24kg
Number per pallet 30
• Dimensions 1.125 x 1.125 m
• Pedestrians Only
• Can withstand a 200kg load over a 700mm trench
• Greatly reduced trip hazard for Pedestrians
• The sides and undersides are made from a soft fl exible material which grips the surface underneath the board and helps the board to resist sliding
• Central section made from reinforced plastic
• Standard colour yellow
• Also available in corporate colours and embossing
Oxford Low-Pro
www.oxfordplastics.com17
SPEED RAMPS AND ROADWAYS
Speed RampSPECIFICATIONS 30mm Inner 50mm Inner 75mm Inner
Part No 0304 0308 0321
Total length 500mm 500mm 500mm
Total width 420mm 420mm 420mm
Height (at highest point) 30mm 50mm 75mm
Total weight 5.5kg 9kg 12kg
Number per pallet 120 120 80
Speed RampSPECIFICATIONS 50mm End Shoulder 75mm End Shoulder
Part No 0310 0323
Total length 210mm 210mm
Total width 420mm 420mm
Height (at highest point) 50mm 75mm
Total weight 3.5kg 4.5kg
Number per pallet 100 100
• Easily installed bolt down traffi c calming ramps
• Made from heavy duty recycled PVC
• White refl ectors in each section make for good visibility at night and in bad weather
• Ramps and ends are available in yellow, white or black
• The 30mm high ramp slows traffi c to 20mph, the 50mm slows traffi c to 10mph and the 75mm slows traffi c to 5mph
• Each inner segment is 420mm wide and 500mm long
• The easy to install segments are sold separately
• Each ramp (except the 30mm) connects to the next using the 0320 speed ramp connector
• They can withstand 44 tonne HGV’s
• Designed to be installed on good condition concrete or asphalt surfaces that are at least 100mm deep
Speed Ramps• Temporary pedestrian crossing – a product that shows
you care about safety and gives clear direction. Can also be used as a zebra crossing on a construction site or other place of work with high pedestrian footfall
• High visibility, fl exible moulded mats
• Clear Path is easy and fast to install and can be fi xed to the ground with bolts
Clear Path Safe Walk
Clear Path Safe WalkSPECIFICATIONS
Part No 0329
Length, end-to-end 1200mm
Height 22mm
Width 600mm
Weight 24kg
Number per pallet 30
• MULTIFUNCTIONAL REVERSIBLE MAT Suitable for Vehicle & Pedestrian Access
• Heavy Duty Ground Protection/ Temporary Access Mat
• Vehicle and Pedestrian anti-slip surface
• Suitable for up to 80 tonnes on fl at ground, depending on ground condition
• 100% recyclable product
• Available in choice of colours and can be embossed with corporate name or logo
• Simple and fast to install with quick and easy to use connectors
• Hand cut outs to aid off loading from vehicles
• Easy clean pattern which can be simply brushed down or hosed down to remove mud after use
EnduraMat
EnduraMatSPECIFICATIONS
Part No 0651 0653 0654 0655
Length 2440mm 2440mm 1220mm 1220mm
Width 1220mm 1220mm 1220mm 1220mm
Thickness 12mm 19mm 12mm 19mm
Weight 32kg 48kg 16kg 24kg
Number per pallet 20 TBC 40 TBC
• Made up of the Oxford Strongwall or Strong-Fence and the Clearpath Safewalk, the Clearpath Walkway is to act as a clear direction for pedestrians
• It is a product that shows you are vigilant about safety
• Easy and fast to install
• High visibility, fl exible moulded mats
• Can also be used as a zebra crossing on a construction site or other places of work used by pedestrians
Clear Path Walkway
Clear Path WalkwaySPECIFICATIONS
Refer to Strongwall or Strong-Fence and Clear Path Safe Walk
1801608 678 888 GENERAL & TRADE MOULDINGS
Sole Plate
• Can be embossed with company logo
• High visibility non slip moulded foot for scaffolding uprights
• Made from HDPE
Sole Board
• Spreads the load on soft ground conditions
• Product will not split
• Has a recess to accept a sole plate which prevents the sole plate slipping
• Can be a made in high visibility yellow or black
Scaffold Tube Cover
• High visibility clip on safety cover
Scaffold Products Trade Mouldings Oxford Plastic Systems provide a comprehensive trade moulding service for our customers.
From our facility at Enstone we can manage mould design and manufacture products for third party organisations.
Our extensive experience means we can help with selecting the best materials to suit your needs. Our modern production facility gives us the fl exibility to mass produce products but also produce small batches economically.
We can employ a number of different moulding processes; injection moulding, compression moulding and rotational moulding. For further information please contact our sales team and we would be happy to assist.
• Small bases with central hole that can be modifi ed to meet different sizes of posts (40 x 40mm or 60 x 60mm or 51mm dia)
• Moulded from tough, durable, rubber-type compound, these bases are easy to carry with a weight of 9kg
• They can be supplied in corporate colours, they can be specially named and a company logo can also be applied
Square Base
Square BaseSPECIFICATIONS
Part No 015
Height 110mm
Width 400mm
Total weight 9kg
Number per pallet 75
• Versatile bases which have holes to accept 5 different sized posts
• Different sizes are available on request
• Moulded from tough, durable, rubber-type compound, these bases are easy to carry with a weight of 25kg
• Dimensions are 785mm × 390mm × 120mm
• They can be supplied in corporate colours, and with name and company logo also available
Eurobase
EurobaseSPECIFICATIONS
Part No 0221
Height 120mm
Length 785mm
Width 390mm
Total weight 25kg
Number per pallet 36
Sole PlateSPECIFICATIONS
Part No 09931
Sole BoardSPECIFICATIONS
Part No 0630
Scaffold Tube CoverSPECIFICATIONS
Part No 09930
www.oxfordplastics.com19
OxBlockSPECIFICATIONS 18kg 24kg
Part No 0210 0216
Length end to end 770mm 770mm
Width 205mm 205mm
Height 120mm 125mm
Weight 18kg 24kg
Number per pallet 48 43
SnapFit Refl ective BoardsSPECIFICATIONS 1.25m 1.50m 2.0m 3.0m
Part No 09626 09627 09628 09629
Length 1250mm 1500mm 2000mm 3000mm
Number per pallet 300 300 300 300
• Designed to form a stable base for metal security fencing
• Produced using black thermoplastic compound – it is therefore a tougher moulding which has great resistance to cracking and damage
• Designed for galvanised fence panels; will accept posts up to 40mm in diameter – different hole sizes available on request
• Available in 2 weights – 18kg and 24kg
• Can be painted in different colours and embossed on 2 sides for corporate identity
OxBlockTough and durable PVC refl ected plank used to increase the visibility of mesh fencing.
• PVC extruded refl ected plank
• HDPE coloured end-caps
• Corporate customisation available
• Planks available in varying lengths (1m–3m)
SnapFit Refl ective Boards• An octagonal base that weights 26 Kg
• It is ideal for use to support temporary signs, security fencing, barricades and beacons
• Moulded from tough, durable, rubber- type compound
• Features a handle for ease of carry
Octagonal Base
Octagonal BaseSPECIFICATIONS
Part No 0172
Height 120mm
Diameter 505mm
Weight 24kg
Number per pallet 36
FENCING FEET & FENCING ACCESSORIES
2001608 678 888 FOCUS ON HEALTH AND SAFETY
Barriers
Wind loading requirements for Unattended (Class B) is 17.6m/s (40mph) Attended works (Class C) is 8.7m/s (19.6mph)
Page 93
Unattended Works
From (date) either the individual barrier or the group of barriers as erected should be capable of withstanding the wind force resulting from winds of Class B (17.6m/s) blowing from any direction.
Barriers must be joined in a way that resists tampering; if through visits or in any other way, you fi nd that barriers are being tampered with and separated, then you must take additional measures to secure the barriers for example, the use of clamps or ties that require a tool for removal.
Attended Works
From (date) either the individual barrier or the group of barriers as erected should be capable of withstanding the wind force resulting from winds of Class C (8.7m/s) blowing from any direction.
Page 24
Where a work site may be approached by pedestrians crossing the road from the opposite side, you should place barriers all around the excavation, even when pedestrians are not diverted into the carriageway.
Most barriers are designed to be put up as part of a system; if they are not properly erected, they will not be suffi ciently stable and could be blown or knocked over. You must follow the manufacturer’s instructions when erecting barriers.
Page 25
If an unattended site contains an open excavation that is within 2 metres of a temporary or permanent footway, then you should either:
Put temporary covers over the excavation or provide an enhanced barrier around the excavation (Strongfence/ Endurafence) (Safecover/Low Pro)
Footway Boards
Page 26
Footway Boards should only be used on footways to maintain foot and light vehicle access during excavation works.
Footway Boards used for bridging excavations:
– Must provide at least 1.2 metres width for pedestrians, but preferably 1.5 metres;
– Must be strong enough to support pedestrians and light vehicles;
– Must be made from material which is unlikely to become distorted;
– Where used for light vehicles the boards must be capable of supporting the added load;
– Where used on a vehicle crossover the whole width of the crossover must be boarded with a minimum width of 2.5m;
– The edges of the footway boards must be chamfered to prevent tripping;
– Should have a slip resistant surface;
– The sides of the excavation should be stable or suitably supported under the board;
– The board should be rigidly fi xed with suffi cient length beyond the excavation to provide the necessary support
– The edges of the footway boards adjacent to the excavation should be fenced to prevent falls
Extract from the ‘Safety at Street works and Road Works. Code of Practice. Consultation Document’ Proposed Legislation – March 2010
Strongwall Barrier MIRA Wind Tunnel Test Data Feb 09SPECIFICATIONS Maximum wind speed achieved
Strongwall Barrier – self-weighted, no extra ballast 32mph (51km/h)
Strongwall Barrier – water fi lled, 10 litres per section 41mph (65km/h)
Endura Fence MIRA Wind Tunnel Test Data July 09SPECIFICATIONS Maximum wind speed achieved
Endura Fence – set up with one 2m section and a 1m section each end at 90 degrees, wind blowing onto the side with the side attachments
43mph (69km/h)
Strongfence MIRA Wind Tunnel Test Data July 09SPECIFICATIONS Maximum wind speed achieved
Strongfence – set up in a rectangle 3m wide x 2m deep 44mph (70km/h)
Strongfence – set up 4m wide with one section attached at 90 degrees 1m in from each end, the wind blowing onto the side with the side sections attached
45mph (72km/h)
Pop Sign MIRA Wind Tunnel Test Data Feb 09
SPECIFICATIONS Maximum wind speed achieved
Small Base, no weights 18mph (30km/h)
Small Base, with internal under weights 24mph (39km/h)
Small Base, with an over weight 33mph (52km/h)
Small Base, with internal under weights and an over weight 50+mph (80+km/h)
Large Base, no weights 50+mph (80+km/h)
Avalon Barrier MIRA Wind Tunnel Test Data Feb 09SPECIFICATIONS Maximum wind speed achieved
Avalon Barrier 17mph (27km/h)
Avalon Barrier Plus 24mph (38km/h)
Avalon Barrier - Clearpath MIRA Wind Tunnel Test Data Feb 09SPECIFICATIONS Maximum wind speed achieved
Avalon Barrier – with Clearpath feet 20mph (32km/h)
Barrier Wind Test Data
All tests carried out at MIRA (Motor Industry Research Association) Wind Tunnel
Wind speed description: Beaufort ScaleForce MPH Description
1 1-3mph Light air. Direction of wind shown by smoke drift.
2 4-7mph Light breeze. Leaves rustle, wind vanes moved by wind.
3 7-10mph Gentle breeze. Leaves and twigs in constant motion. Wind extends a light fl ag.
4 13-18mph Moderate breeze. Raises dust and loose paper, small branches are moved.
5 19-24mph Fresh breeze. Small trees in leaf begin to sway, waves form on inland water.
6 25-31mph Strong breeze. Large branches in motion, whistling in telegraph wires.
7 32-38mph Near gale. Whole trees in motion, diffi culty in walking against the wind.
8 39-46mph Gale. Breaks branches off trees, walking very diffi cult.
9 47-54mph Severe gale. Structural damage occurs to roof slates and chimney pots.
10 55-63mph Storm. Trees uprooted, considerable damage to buildings, seldom occurs inland.
www.oxfordplastics.com21
FOCUS ON HEALTH AND SAFETY
Extract from HSE Protecting the Public – Your Next Move: Section 2, The Site Perimeter and Other Boundaries; Item 20
…Where the feet of sectional fencing points into pedestrian areas, these should be highlighted to avoid tripping hazards.
Reduced or Zero Trip Hazard Barriers
Avalon Clearpath Oxford Wall and Oxford Wall Combi
Strongwall Endura 2m Fence
Anti-climb Barriersfor hazardous areas
Extract from HSE Protecting the Public – Your Next Move: Section 2, The Site Perimeter and Other Boundaries; Item 20
…Experience shows that a 2 metre high fence usually provides a reasonable site barrier, even for short duration work… If a fence is to be used then it should be diffi cult to climb.
Product Maximum sideways force
Oxford Strongwall 400 Newtons
Oxford Strongwall – water fi lled 550 Newtons
Oxford Strongfence 400 Newtons
Oxford Strongfence – water fi lled 550 Newtons
Standard 2m barrier (typical) 90 Newtons
Barrier Load Test Data
for deeper excavation and heavily pedestrianised areas – BS7818 Compliant
Extract from Chapter 8 Streetworks, Traffi c Sign Manual 2009 Part 2 Operations; Signing and Marking Issues – Pedestrian Barriers section 04.11.10 …Barriers alongside excavations greater than 300mm in depth in high duty areas should be able to withstand crowd pressure… These barriers should comply with BS7818… Lesser pedestrian traffi cked footways may use other approved barrier systems that are rigid enough to guard pedestrians from traffi c, excavations, plant and materials and withstand wind pressures.
Extract from HSE Work at Height Regulations 2005: What you must do as an employer – Item 14
You must do all that is reasonably practicable to prevent anyone falling.
Extract from HSE Work at Height Regulations 2005: What you must do as an employer – Item 15 Dutyholders must… Use work equipment or other measures to prevent falls where they cannot avoid working at height…
A sideways force of 9.8 Newtons is equivalent to a 1Kg sideways force.
A stumbling or falling person of 15 Stone typically exerts a force of 30 Kg on a barrier.
Barrier undergoing test Endura 2m FenceStrongfence
2201608 678 888 ENVIRONMENTAL POLICY
GENERAL CONDITIONS OF SALE
1. All sales effected by Oxford Plastic Systems Limited (“the Company”) shall be made on the following terms and conditions which supersede earlier sets of conditions appearing in the Company’s letters, invoices or elsewhere and shall override any terms or conditions stipulated, incorporated or referred to by the buyer in the Order or in any negotiations, and the Company will not contract under any other terms or conditions whatsoever unless expressly agreed in writing by a Director of the Company.
2. For the purposes of these terms and conditions all references to “goods” shall be construed as including reference to any tooling provided by the Company.
3. All orders are accepted and quotations are made on the basis that prices are subject to revision without notice and all goods will be invoiced at prices ruling at the time of despatch.
4. Payment for goods supplied shall be made 30 days from the date of invoice unless the buyer is notifi ed otherwise and prompt payment is a condition precedent to future deliveries.
5. The Company reserves the right to charge interest at a rate of 21/2% above the base rate of Barclays Bank plc from time to time in respect of late payments, and such interest shall be payable before and after judgement.
6. Any time or date named by the Company for delivery is given and intended as an estimate only. Time of delivery shall not be of the essence and the Company shall not be liable to make good any loss or damage whatsoever arising directly or indirectly out of delay in delivery howsoever caused and the buyer shall be obliged to accept delivery notwithstanding such delay.
7. Each delivery shall be considered a separate contract.
8. Where goods are delivered to an independent carrier for transmission to the buyer, and risk in the goods has already passed to the buyer, the Company shall be under no obligation to make a reasonable contract of carriage on behalf of the buyer although it will make every effort to do so. Immediate written notice shall be given to the Company and to the carriers of any partial loss or damage in transit or of the non-arrival of the goods within 5 days of the date of despatch notice.
9. Notwithstanding that the property in the goods may remain in the Company from time of the despatch of the goods from the Company’s Works or Stores until delivery to the buyer the risk of any loss or damage to or deterioration of the goods from whatever cause shall be borne by the buyer.
10. The Company shall be deemed to have fulfi lled its contractual obligations in respect of any delivery though the weight of the product in question may be up to 12.5% more or less than the weight specifi ed in the Order.
11. Notwithstanding that a sample of the goods be exhibited to and inspected by the buyer, such sample is so exhibited and inspected solely to enable the buyer to judge for himself the quality of the bulk, and not so as to constitute a sale by sample. The buyer shall take the goods at his own risk as to their corresponding with the said sample.
12. These conditions shall be the conditions of the contract and any term condition or warranty whether written or oral which might otherwise be implied by statute, common law or otherwise in any sale by the Company or in any contract connected thereto as to
quality or fi tness for any particular purpose (whether or not the purpose has been made known to the Company) of goods sold by the Company insofar as the same may be lawfully excluded is hereby expressly excluded except insofar as the same relates to the liability of the Company for death or personal injury resulting from negligence, and subject thereto the Company shall be under no liability in respect of any error, neglect, omission or default by itself, its servants or agents in giving advice or information concerning the nature, properties, or suitability for any particular purpose of goods sold or to be sold by the Company.
13. Without prejudice to Condition 11 specifi cations or data provided by the Company to the buyer in relation to the goods are given solely to assist the buyer in assessing the suitability of any goods supplied to the process for which they are ordered. No warranty whatever is given in respect of any such specifi cations or data provided and it is the responsibility of the buyer to make such tests as may be necessary to establish the suitability of any goods ordered for the purposes for which they are required by him.
14. If the buyer wishes to claim that the goods are faulty for any reason, he shall only be entitled to do so within a period of 5 days after delivery of the goods.
15. If the buyer wishes to cancel an order or return goods after despatch (does not apply to bespoke mouldings) for any reason other than in point 14. he shall be subject to a 10% handling charge.
16. Should the buyer make any default in any of his obligations hereunder or otherwise in respect of the Company or commit any act of bankruptcy or cease business or threaten to cease business or being a company go into liquidation or have a Receiver appointed of all or any of its assets, the Company may cancel the contract insofar as it relates to goods undelivered at the date of cancellation without thereby incurring any liability to the buyer whatsoever.
17. Notwithstanding delivery and the passing of risk in the goods to the buyer, the property in the goods shall not pass to the buyer but shall remain the sole and absolute property of the Company as legal and equitable owner until the Company has received in cash or cleared funds payment in full of the price of such goods and all other goods agreed to be sold by the Company to the buyer for which payment is then due and pending such payment the following provisions shall be applicable to such goods:
(i) The buyer shall at all times hold the goods as bailee for the Company.
(ii) The buyer shall mark and keep the goods so as to identify them clearly as the property of the Company.
(iii) The Company shall be entitled at any time by its servants or agents at the buyer’s expense to enter upon the buyer’s premises and to recover and dispose of the goods and the buyer shall make no claim against the Company in respect of any such entry or disposal save as to recover any balance remaining after satisfaction of all amounts due from the buyer to the Company. This right shall continue to subsist notwithstanding the termination of the contract for any reason and is without prejudice to any accrued rights of the Company thereunder or otherwise.
18. The due performance of any contract is subject to cancellation or variation by the Company as a result of an inability to secure labour, materials or supplies or as a result of any act of God, war,
riots, or civil disturbance, strike, lockout or other labour dispute, fi re, fl ood, drought or accident, legislation, requisitioning or other Act or order by any Government Department, Council or other duly constituted Authority, or of any other cause (whether of the forgoing classes or not) beyond the Company’s control and in such event no liability shall attach to the Company for any reason whatsoever.
19. We may transfer information about you to our bankers/fi nanciers, in order for them to provide their services to us and other customers of theirs and to help them to (a) obtain credit insurance (b) undertake credit control (c) undertake assessment and analysis (including credit scoring, market, product and statistical analysis) (d) securitise debts and (e) protect their interests. We or our bankers/fi nanciers may make credit reference agency searches in respect of your business and its principals. Please note that credit reference agencies make a record of searches which may be used to prevent fraud or money laundering or by other subscribers to make credit decisions about you. Our bankers/fi nanciers may give information about you and your indebtedness to the following for the purposes stated:
a) any other divisions or associated companies of theirs - for the business purposes of such divisions or companies;
b) our or their insurers - to quote for and issue any credit policy or to deal with any claims;
c) any advisers acting on our or their behalf - so the advisers can carry out their services;
d) any business to whom your indebtedness or our fi nancing arrangements with them may be transferred - to facilitate such transfer;
e) to any person to whom they have a duty of disclosure or to whom the law permits disclosure;
Our bankers/fi nanciers may make decisions about you solely using an automated decision making process, such as credit scoring; however, they will tell us (and in turn we will tell you) if they make a signifi cant decision only using such a process. Through us you can then request a review of their decision using other means;
Our bankers/fi nanciers may monitor and/or record your phone calls to them for training and/or security purposes.
We will provide you with details of our bankers on request, including a contact telephone number from where you can obtain details of the credit reference agencies used by them and any third parties to whom information is transferred.
20. These Conditions shall in all respects be construed and operate as a contract made in England and in accordance with the laws of England and the buyer shall submit to the jurisdiction of the Courts of England.
ENVIRONMENTAL POLICYOxford Plastics Systems Ltd recognises that its impact up-on the environment both through its day to day operations, company development and infl uence and effects on the wider community. It acknowledges a responsibility for, and a commitment to, protection of the environment at all levels. Oxford Plastics Systems will comply fully with environmental legislation and in addition committed to:
• Promote the recycling and re-use of plastic materials through marketing, product design and innovation.
• Promote environmental management policies and practices throughout the company.
• Increase awareness of the environmental responsibilities amongst all employees.
• Minimise waste and pollution and develop and operate environmentally sound waste management procedures.
• Continue to reduce the consumption of fossil fuels and to incorporate long term strategies for energy effi ciency into planning and development.
• Continue to encourage and facilitate modes of transport for both product and people which minimises environmentally friendly principles of the operation of company owned vehicles.
• Promote a purchasing policy which will give preference, as far as is practicable, to those products and services which cause the least harm to the environment.
• Avoid wherever practical the use of environmentally damaging substances, materials and processes.
• Consider environmental factors in respect of the development of the company, seeking as far as is practical to reduce harmful environmental impacts and to integrate new developments into the local environment.
• Work with other local, national and other agencies as appropriate to promote environmental policies.
Products that are returned by End User customers to Oxford Plastic Systems will be recycled. Adequate quantity of product and notice of return will need to be taken into account when this is required together with any costs encountered.
TERMS AND CONDITIONS
Working with the Carbon Trust
www.oxfordplastics.com23
www.oxfordplastics.com
01608 678 [email protected]
Oxford Plastic Systems Ltd Unit T2, Enstone Business Park
Enstone, Oxfordshire OX7 4NP
United Kingdom
Managing DirectorChris Whiteley Mob: +44 7771 765774 Tel: +44 (0)1608 672971 [email protected]
Sales ManagerPaul Braddy Mob: +44 7919 895418 Tel: +44 (0)1608 672952 [email protected]
Export SalesAfrica Moniz Tel: +44 (0)1608 678888 [email protected]
Operations Director David McGee Tel: +44 (0)1608 672961 [email protected]
Accounts Belinda Whiteley Tel: +44 (0)1608 677002 Fax: +44 (0)1608 677452 [email protected]
Sue Flanagan Tel: +44 (0)1608 677002 Fax: +44 (0)1608 677452 sue.fl [email protected]
Administration Lesley Jordan Tel: +44 (0)1608 678888 [email protected]
Commercial Manager Peter Creighton Tel: +44 (0)1608 672957 [email protected]
Materials Manager Steven Gee Tel: +44 (0)1608 672972 [email protected]
CONTACTS
Innovation For Safety
Innovation For Safety
Traffi c management, site safety and security products
Oxford Plastic Systems Ltd Unit T2, Enstone Business Park, Enstone, Oxfordshire OX7 4NP
Supplied by
Issue: 09/10
Top Related