www.heatroadmap.eu @HeatRoadmapEU
Project Number: 695989
Project acronym: HRE
Project title: Heat Roadmap Europe (HRE): Building the knowledge, skills, and capacity required to enable new policies and encourage new investments in the heating and cooling sector
Contract type: H2020-EE-2015-3-MarketUptake
This project has received funding from the
European Union's Horizon 2020 research and
innovation programme under grant agreement No.
695989.
Baseline scenario of the
total energy system up
to 2050
Insights from JRC-EU-TIMES for Lead-Users
Deliverable 5.4: Energy Tools Manual for Lead-Users
June, 2017
2 @HeatRoadmapEU www.heatroadmap.eu
Deliverable number: D5.4
Deliverable title: Energy Tools Manual for Lead-Users
Work package: WP5
Due date of deliverable: 31 August 2017
Actual submission date: M18 – 31/08/2017
Start date of project: 01/03/2016
Duration: 36 months
Author(s)/editor(s): Wouter Nijs (Joint Research Centre, JRC)
Pablo Ruiz Castelló (Joint Research Centre, JRC)
Ignacio Hidalgo González (Joint Research Centre, JRC)
George Stiff (ICLEI Europe)
Reviewer(s): Brian Vad Mathiesen (AAU)
Project Coordinator Brian Vad Mathiesen (AAU)
Dissemination Level of this Deliverable: PU
Public PU
Confidential, only for members of the consortium (including the Commission Services) C0
www.heatroadmap.eu @HeatRoadmapEU
Contact: Knowledge for the Energy Union Unit
Joint Research Centre, European Commission
Westerduinweg 3, NL-1755 LE Petten
Netherlands
E-mail: [email protected],
Heat Roadmap Europe website: www.heatroadmap.eu
Deliverable No. D5.4: Energy Tools Manual for Lead-Users. Public report.
© 2017
This project has received funding from the European Union's Horizon 2020
research and innovation programme under grant agreement No. 695989. The
sole responsibility for the content of this document lies with the authors. It
does not necessarily reflect the opinion of the funding authorities. The funding
authorities are not responsible for any use that may be made of the
information contained therein.
4 @HeatRoadmapEU www.heatroadmap.eu
Table of Contents
Introduction ................................................................................................................................. 5
Key messages from the JRC-EU-TIMES baseline scenario......................................................... 6
JRC-EU-TIMES and its HRE4 baseline ..................................................................................... 11
How does the JRC-EU-TIMES model work? ............................................................................. 12
Who should use the baseline scenario? .................................................................................... 15
What are the main benefits of JRC-EU-TIMES? ........................................................................ 16
How does JRC-EU-TIMES model fit into HRE4? ....................................................................... 16
www.heatroadmap.eu @HeatRoadmapEU
Introduction
The overall objective of the Heat Roadmap Europe 4 (HRE4) project is to provide new capacity
and skills for lead-users in the heating and cooling (H&C) sector, including policy-makers, industry
and researchers at local, national and EU levels, by developing the data, tools, methodologies, and
results necessary to quantify the impact of implementing more energy efficient measures on both
the demand and supply side of the sector.
To that end, key activities within HRE4 related to the European Commission's JRC-EU-TIMES
model are to:
project the annual evolution of the EU energy system up to 2050 under different conditions,
transfer those modelling results into the hourly-energy model EnergyPLAN (carried out by
Aalborg University in the same work package, WP5), and
ensure that the solutions compared in these studies are technically robust – the linkage of
these two energy system models is a key improvement from previous projects.
This document briefly explains the JRC-EU-TIMES model and how the results generated within
HRE4, in particular the baseline scenario of the total EU energy system through 2050 (described
even in more detail in D5.2), can be used by European lead-users, especially those in the fourteen
EU member states1 which comprise HRE4’s primary focus.
Furthermore, it should be noted that while the overall HRE4 project focuses primarily on the H&C
sector, the baseline scenario talked about in this document deals with the overall projection of the
entire energy system, where of course both electricity and H&C play very key roles with important
implications across the whole system. The presence of so much content in this report oriented
towards the power sector is by design, though of course there are also many valuable H&C-
oriented messages to be gained here as well2. HRE4 deems it as crucial for understanding the
larger energy context, including electricity’s role in it, in order to appreciate the ways that the H&C
sector can, should and will contribute to decarbonisation.
1 Though insights from JRC-EU-TIMES are applicable across Europe, HRE4 especially concentrates on
those fourteen countries with the highest H&C demands: Austria, Belgium, Czech Republic, Finland, France, Germany, Hungary, Italy, the Netherlands, Poland, Romania, Spain, Sweden and the UK. 2 Those readers interested in H&C-specific results are strongly encouraged to look into other HRE4
deliverables (such as D5.2) which deal with H&C in even more detail.
6 @HeatRoadmapEU www.heatroadmap.eu
Key messages from the JRC-EU-TIMES baseline scenario
1
Sweeping changes should be expected for the EU’s future energy demand mix, with significantly less reliance on most fossil fuels and an ever-increasing integration of renewable energy sources (RES).
The JRC-EU-TIMES baseline envisions that by 2050, in terms of primary energy, coal
consumption will be halved and oil consumption will be reduced by a third. Natural gas will
likely remain an important energy carrier, with consumption levels similar to 2015 values.
From a production standpoint, the RES share of total primary energy production will
increase from 10% in 2015 to 22% by 2050. The share of variable RES (from wind, solar
and ocean) will increase from 2% in 2015 to 9% by 2050. The share of non-variable RES
consists mainly of biomass that will increase from 5% to 9% by 2050.
By 2040, already 28% of electricity will be generated from variable RES (VRES), 18%
produced from other RES (e.g. geothermal and hydro) and the remaining 55% will still be
supplied by fossil fuel and nuclear power plants. Figure 1 shows a benchmarking of the
JRC-EU-TIMES baseline scenario for HRE4 with selected energy projections from other
key sources.
Figure 1: HRE4 baseline (power sector), variable RES balance across different key EU28 scenarios for 2040
3
3 Sources: 1) IEA ETP-B2DS and IEA ETP-RTS: IEA, 2017. Energy Technology Perspectives 2017.
International Energy Agency, 2) IEA WEO-450 and IEA WEO-NP: IEA, 2016. World Energy Outlook 2016. International Energy Agency, 3) NEO2017: BNEF, 2017. New Energy Outlook 2017. Bloomberg New Energy
www.heatroadmap.eu @HeatRoadmapEU
The graph compares the share of variable RES, other RES and fossil fuel and nuclear
power generation. As can be seen, the HRE4 baseline VRES balance results are nearly in
line with the EU Reference Scenario from the European Commission, and actually even
more conservative than the IEA ETP scenario.
The final energy consumption of residential and tertiary (i.e. commercial and public
services) buildings will decrease by 30% and 15% respectively compared to 2015. The
most important driving factor for these reductions will be a lower demand for heating largely
due to improved energy efficiency and more investment in efficiency measures.
2
Investment in the EU energy system should also evolve significantly by 2050 in order to take advantage of the economic benefits inherent in energy efficiency and RES. Nuclear power will continue to grow as well.
Between 2020 and 2050 (and even up to 2065), 450 billion EUR of investments in
residential buildings will be made in improved building envelopes, e.g. insulation, efficient
windows, etc. Industry and tertiary buildings already tend to be much more efficient, largely
driven by national/EU efficiency targets and policies, not to mention pure financial motives
of building owners wishing to minimise their costs.
Wind and solar alone will make up almost 50% of investments made into new power
generation capacities, with nuclear power plants accounting for 40%.
3
The current popularity of electric vehicles should only continue to grow as technologies improve, costs decline and the ancillary benefits of more sustainable transport come to be more fully realised.
The JRC-EU-TIMES baseline scenario sees electric vehicles already becoming cost-
effective before 2030, largely due to significant cost reductions from improved technologies,
especially in batteries.
By 2030, around a sixth of all 300 million vehicles in the EU should be fuelled by electricity.
Electric vehicles’ potential to facilitate power grid management will grow in prominence,
especially their contribution to augmenting grid flexibility and storage.
Finance, 4) EU Ref: Capros et al., 2016. EU Reference Scenario 2016 - Energy, transport and GHG emissions Trends to 2050, and 5) Geco-INDC: Kitous et al., 2016. GECO 2016. Global Energy and Climate Outlook Road from Paris. Joint Research Centre.
8 @HeatRoadmapEU www.heatroadmap.eu
4
Other than from RES, the decarbonisation of EU energy systems driven by EU and national-level energy efficiency targets across multiple sectors should continue to drastically reduce CO2 emissions.
The JRC-EU-TIMES baseline scenario for this project includes the new proposed 30%
energy efficiency target for 2030 at the EU level, which has a goal to limit primary energy
consumption to just 1320 Mtoe. This is equivalent to a 23% decrease with respect to the
energy consumption in 2005.
The proposed emission targets for individual member states to achieve a 30% reduction in
GHG emissions by 2030 under the EU’s Effort Sharing Regulation (ESR), meaning from
non-ETS (Emissions Trading System) sectors, will end up pushing down emission levels
(2010 2050) from residential buildings by over half (482 228 MtCO2) and the transport
sector by nearly a fifth (1200 1041 MtCO2).
Despite a 30% increase foreseen for passenger and freight demand, CO2 emissions from
transport are still expected to be reduced by 10% from 2015 levels by 2050.
5
In the baseline scenario the final energy used for heating and cooling decreases with 23%. Coal and oil boilers are gradually abandoned in buildings, while biomass displaces fossil fuels in the industry.
The total final energy used for heating and cooling decreases by 23% by 2030, from 7000
TWh in 2010 to 5400 TWh. This 23% decrease is in line with the proposed overall energy
efficiency target of 30% target for 2030, bearing in mind the 23% equivalent reduction when
compared to historical consumption. After 2030, no more major reduction of energy use is
occurring.
Due to improvements in building insulation as well as heating and cooling technologies,
energy use in buildings decreases by 32% by 2030, from 4100 TWh in 2010 to 2800 TWh.
Coal and oil boilers are gradually abandoned.
Energy use for heating and cooling in the industry remains relatively stable from 2010 to
2050, but biomass replaces gas, and other fossil fuels.
www.heatroadmap.eu @HeatRoadmapEU
Baseline results for EU28
10 @HeatRoadmapEU www.heatroadmap.eu
www.heatroadmap.eu @HeatRoadmapEU
JRC-EU-TIMES and its HRE4 baseline
The JRC-EU-TIMES model aims to analyse the role of energy technologies and their
innovativeness for meeting European policy targets related to energy and climate change. A typical
question that JRC-EU-TIMES can address is which technological improvements are needed to
make technologies competitive under various low-carbon energy scenarios.
Such technology-oriented policy analyses complement the climate and energy policy analysis that
is at the core of a series of published impact assessments from the European Commission. The
JRC-EU-TIMES model's algorithm solves for the optimum investment portfolio of technologies
along the entire supply chains for five sectors, while still fulfilling the energy-services demand.
JRC-EU-TIMES is therefore very useful for supporting studies which require:
1. modelling at the level of an energy system,
2. a high detail of technologies, and
3. intertemporal results on the evolution of the energy system.
The JRC-EU-TIMES model produces projections (or scenarios) of the EU energy system showing
its annual evolution up to 2050 under different sets of specific assumptions and constraints. In
each projection the energy system evolves in a different way, representing a possible future in
which assumed technological performances and costs interact with user-defined policies and
environmental impacts, all subject to different macro-economic and demographic hypotheses.
JRC-EU-TIMES does not estimate any probability of occurrence for the scenarios, therefore they
should not be regarded as actual forecasts of the future. Since the number of possible scenarios is
infinite, it is necessary to define a set of alternative, plausible and self-consistent scenarios that
cover a range of meaningful variations. A comparison of these possible futures is then used to
draw insights useful for policy-making.
Figure 2: Scenario-thinking creates a set of plausible futures from a vast range of options
Known at present Plausible futures
12 @HeatRoadmapEU www.heatroadmap.eu
The scheme outlined above includes two types of elements:
Normative: the overall climate and energy policy goals exogenously defined by the user,
and
Exploratory: the technology choices selected endogenously by the model as it solves for an
optimisation model.
How does the JRC-EU-TIMES model work?
The JRC-EU-TIMES is a model of the energy system within the EU28 and certain neighbouring
countries (Iceland, Norway, Switzerland and the Western Balkans). It provides a coherent
framework to quantitatively assess the development needs for each of the identified technology
sectors under different climate and energy pathways in Europe, up to 2050.
The model consists of two main components: 1) the TIMES model generator (a model code owned
by the IEA's Energy Technology Systems Analysis Program, ETSAP), and 2) the JRC-EU-TIMES
database.
Figure 3: Structure of the JRC-EU-TIMES model (GAMS = General Algebraic Modelling System)
The TIMES model generator from ETSAP allows for a detailed techno-economic description of
resources, energy carriers, conversion technologies and energy demands. Most TIMES-based
energy system models include upstream energy flows up to the level of resource-mining and
imports. After its transformation from primary energy (through refineries and power plants, among
other technology options), final energy can be consumed within different economic sectors (e.g.
residential, tertiary/services, industry or transportation). An important difference to other models
which cover only a single subsector of the energy system is that in TIMES the subsectors can
interact with each other.
www.heatroadmap.eu @HeatRoadmapEU
Meanwhile, the JRC-EU-TIMES database contains all relevant information for the updated model
used within HRE4:
1. JRC-EU-TIMES logic: includes those specific equations (and relationships) between
different variables of the model which are not included in the general TIMES model
generator from ETSAP. Specific equations introduced by JRC include, for example,
relationships between the operation of dispatchable power plants and the amount of
variable power generation (e.g. from certain RES).
2. JRC-EU-TIMES data: includes fixed numeric techno-economic parameters representing
the energy system such as:
a. End-use energy services and materials’ demand
b. Present and future sources of primary energy supply and their potentials
c. Key characteristics of existing and future energy-related technologies, such as
efficiency, technological stock, availability, investment costs, O&M (operation and
maintenance) costs and discount rates
d. Policy constraints, such as emission limits or energy efficiency targets and other
policy assumptions.
Figure 4: Building blocks of an energy system, as used by the JRC-EU-TIMES model
The JRC-EU-TIMES model solves an optimisation problem for the horizon 2005-2065 by
minimising the total discounted energy-system cost needed to meet the future demand for energy
services. The energy-system cost includes investments in supply and demand technologies,
operational expenses and fuel costs.
14 @HeatRoadmapEU www.heatroadmap.eu
The optimisation horizon is divided into 9 periods. Each period consists of equal years that are
divided in 12 time-slices that represent an average of day, night and peak demand for each of a
year’s four seasons. To address flexibility issues, each time-slice of the power sector is further split
into two sub-periods – this additional dimension allows differentiation of situations where variable
RES electricity generation exceeds demand from those situations where this is not the case. Using
this approach, the JRC-EU-TIMES model is able to model and compare curtailment with different
transformation or storage options in cases of excessive variable RES electricity production.
Figure 5: Time resolution of the JRC-EU-TIMES model, including time-slices within a single year
2020 Milestone years
Base
year
Summer Spring Fall Winter
www.heatroadmap.eu @HeatRoadmapEU
Who should use the baseline scenario?
The baseline scenario produced by the JRC-EU-TIMES model covers the EU28 member states
and certain neighbouring countries, projecting the energy system in these regions through 2050.
Given the scale and resolution of the projections, they are useful mainly for policy-makers, energy
agencies, industries/companies and NGOs acting at EU or national levels.
Though the outputs produced by JRC-EU-TIMES in the framework of HRE4 can be publicly
shared, the model itself is not directly accessible to external stakeholders. JRC-EU-TIMES is an
improved offspring of previous European energy system models developed under several EU-
funded projects, such as NEEDS, RES2020, REALISEGRID, REACCESS and COMET, using the
model generators developed in the context of IEA's ETSAP. The members of the ETSAP network,
which includes the European Commission, carry out a joint program of energy technology systems
analyses, and ETSAP grants its members a licence to use the ETSAP models generators
according to certain conditions, including the following:
ETSAP owns all intellectual property within the source code for the TIMES model generator
and the related non-commercial support utilities and files needed to run such generators.
The ETSAP models generators are provided by ETSAP free of charge.
The TIMES code, developed with GAMS (General Algebraic Modelling System), is provided
in an open format so as to permit experimentation with new research ideas and algorithms.
The licensing organisation is encouraged to experiment with and to improve the code. Such
variants will become the intellectual property of ETSAP.
The JRC is currently exploring possibilities to offer the JRC-EU-TIMES model as an open platform,
managed by the JRC, so that lead-users in the public can even more directly take advantage of
HRE4 results. In any case, it should be mentioned that the results of the JRC-EU-TIMES model
are produced under the overall assumptions and boundaries of the HRE4 project, and therefore do
not represent any official position of the European Commission.
16 @HeatRoadmapEU www.heatroadmap.eu
What are the main benefits of JRC-EU-TIMES?
Beyond the JRC-EU-TIMES results, more fully described in D5.2, and the outline already provided
in this document, it can be emphasised that the JRC-EU-TIMES model may be used for analysing
energy scenarios with different purposes such as:
using analyses of the HRE4 scenarios to support the development of
o a resilient Energy Union
o National Energy Efficiency Action Plans (NEEAP)
o National Renewable Energy Action Plans (NREAP)
developing cost-effective policy recommendations to decarbonise the EU’s H&C sector
projecting the performance and penetration of different H&C technologies across the EU,
but within the HRE4 context, especially in the project’s fourteen focal countries.
How does JRC-EU-TIMES model fit into HRE4?
The JRC-EU-TIMES model’s annual energy projections per country are combined with HRE4’s
results from within its own work package, WP5, and other WPs (namely H&C potentials and
demands from WP2, H&C profiles from WP3, potentials for demand reduction from WP4, and
hourly energy supply and demand profiles from WP5) in order to produce the 2050 baseline
scenario of the total energy system, which is then analysed at an hourly level alongside WP5’s
EnergyPLAN model.
Figure 6: The JRC-EU-TIMES model within HRE4’s WP5
The projections produced by the JRC-EU-TIMES model will continue to be used during 2018 as an
important input for WP6 in order to evaluate different H&C scenarios for the 14 member states
considered in HRE4. This will then form the basis of in-depth policy recommendations and
roadmaps resulting from the HRE4 project.
WP5
WP2
H&C potentials and
demands
WP3
H&C baselines for
buildings and industry
WP4
H&C potentials for
demand reduction
JRC-EU-TIMES annual
energy projections
EnergyPLAN hourly
energy projections Hourly inputs
Combination of scenarios in hourly and
annual energy systems tools for WP6
www.heatroadmap.eu @HeatRoadmapEU
Figure 7: The JRC-EU-TIMES model in WP6
WP6
WP2
H&C potentials and
demands
WP3
H&C baselines for
buildings and industry
WP4
H&C potentials for
demand reduction
JRC-EU-TIMES
annual energy
projections
EnergyPLAN hourly
energy projections
Heat Roadmap Europe
Heating and Cooling
Roadmaps
WP5 and WP6
Align results with inputs
for energy modelling
WP5 Result: methodology to
combine annual and hourly
scenarios
Top Related