Tosyalı Holding a leading flat steel and steel pipe manufacturer of Turkish private sector and
Toyo Kohan a leader company of Japan and the world in high technology steel products
segment concluded a cooperation agreement in February 2012.
The foundations of Tosyalı Toyo Çelik A.Ş. which is to manufacture the first Turkish high
technology flat steel with high added value, were laid in January 2015 after preparation works
that took almost 3 years.
The facility in Osmaniye Organized Zone on an area of 250.000 m², has a total investment value
of 650 million dollars and the productions started at the facility as of December 2016.
This investment aims to eliminate Turkey’s dependence on foreign sources when it comes to
high technology steel products; a significant portion of the imported products are sourced
domestically after this investment and this contributes to reduce the current deficit.
The facilities have a rolling capacity of 1.0 million tons and employ approximately 800 people
to manufacture tin plates, galvanized, painted, cold rolled, pickled-oiled coils, slitted coils and
plates. The products to be used by a wide range of sectors from packing industry to electrical
household appliances, IT products to construction sector, white goods to automotive not only
meet the demand in Turkey but also in a vast geography from Europe to Caucasus, Middle East
to North Africa.
About Toyo Kohan
In 1934, Toyo Kohan was established as the first tin plate manufacturer of Japan. Currently,
the company has a pioneering position in Japan on business segments such as electro
galvanization, nickel plating, treated surface steel, chromium plating and film coated steel
and it is the world’s number one company with the most advanced production technology. Toyo
Kohan has investments in Japan, Malaysia and China and its turnover was 1.5 billion US
Dollars in 2015. The company employs approximately 2.800 people.
The max mum order w dth s 1300 mm. W dths from 1275 to 1300 mm are subject to negot at on.
The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Thickness Range : 1.60 – 4.00 mm
Width Range : 700 – 1300 mm
Standard : EN 10111:2008, EN 10025-2:2004, EN 10149-2:2013, EN 10338:2015
1300
M n mum Max mum M n mum Max mum M n mum Max mum M n mum Max mum
700 1100700 1169700 1250700 1250 700 1250 700 1000 700 1000700 1270 700 1250 700 1000 700 1000700 1270 700 1270 700 1100 700 1100700 1270 700 1270 700 1200 700 1200700 1270 700 1270 700 1270 700 1270700 1270 700 1270 700 1270 700 1270700 1270 700 1270 700 1270 700 1270700 1270 700 1270 700 1270
0,70 - 0,790,80 - 0,890,90 - 0,991,00 - 1,201,21 - 2,00
0,20 - 0,230,24 - 0,250,26 - 0,390,40 - 0,44
0,60 - 0,690,45 - 0,59
Th ckness( mm )
W dth ( mm ) W dth ( mm ) W dth ( mm ) W dth ( mm )
Steel TypeGeneral Appl cat on Steels for Batch Anneal ng,
Cont nuous Anneal ng and Cont nuous Galvanaz ng Process
General Structrural Steels
Cold Rolled Fullhard Steels
Low Carbon Ultra Low Carbon Med um Strength Strap Product on
FDC01FDC03
SAE 1006SAE 1008 FDC04
S215GSAE 1010SAE 1012SAE 1015SAE 1016
TTS215G
Fullhard CRF CRFC
COLD ROLLED FULL HARD PRODUCTS
Product Type
Form of Products
Co l Cut to Length
Note:Th cknesses under 0.20 mm are subject to negot at on. Max mum w dth s 1300 mm. Orders between 1271 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Thickness Range : 0.16 – 2.00 mm
Width Range : 700 – 1300 mm
Standard : EN 10130:2007, EN 1623:2009, SAE J403:2014
12507000,26 - 0,440,45 - 1,20 700 1270
0,20 - 0,23 700 11000,24 - 0,25 700 1169
Th ckness( mm )
W dth ( mm )
M n mum Max mum
Batch Anneal ng BCR BCRK BCRC BCRKC
Steel Type General Appl cat on Steels for Draw ng
Cold Rolled Draw ng and Deep Draw ng Steels
Low Carbon Low Carbon / Enamell ng
DC01DC03DC04
CS TB 1006
DC01EK DC04EK
COLD ROLLED PRODUCTS
Product Type
Form of Products
Co l Tr mmed Edge Cut to Length Tr mmed Edge and Cut to Length
Thickness Range : 0.20 – 1.20 mm (for batch annealed (BA) materials)
0.20 – 0.80 mm (for continuous annealed (CA) materials)
Width Range : 700 – 1300 mm
Standard : EN 10130:2007, EN 10209:2013, ASTM A1008M:2016
Note:Th cknesses under 0.30 mm are subject to negot at on. Max mum w dth s 1300 mm. Orders between 1271 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
0,30 - 0,44 700 1250 700 1175
0,60 - 0,80 700 1270 700 12700,45 - 0,59 700 1270 700 1175
0,26 - 0,26 700 12500,27 - 0,29 700 1250
0,20 - 0,23 700 11000,24 - 0,25 700 1169
Th ckness( mm )
W dth ( mm ) W dth ( mm )
M n mum Max mum M n mum Max mum
Steel Type General Appl cat on Steels for Draw ng
Cold Rolled Draw ng and Deep Draw ng Steels
Low Carbon / Enamell ng Low Carbon
DC01DC03
DC01EKDC04EK
CS TB 1006
DC04
COLD ROLLED PRODUCTS
Product Type
Form of Products
Co l Tr mmed Edge Cut to Length Tr mmed Edge and Cut to Length
Cont nuous Anneal ng CCR CCRK CCRC CCRKC
M n mum Max mum M n mum Max mum M n mum Max mum
23 581 23 58123 622 23 62223 622 23 62223 622 23 622 23 58423 632 23 632 23 58423 632 23 632 23 63224 63228 63235 63239 6321,11 - 1,20
0,27 - 0,29
0,45 - 0,590,60 - 0,800,81 - 0,900,91 - 1,001,01 - 1,10
0,30 - 0,44
0,26 - 0,26
Cold Rolled Draw ng and Deep Draw ng Steels
Low Carbon / Enamell ng Ultra Low Carbon
Batch Anneal ng Cont nuous Anneal ng Cont nuous Anneal ng
DC01DC03DC04
DC01EKDC04EK
CS TB 1006
DC01DC03
DC01EKDC04EK
CS TB 1006
DC04
Th ckness( mm )
W dth ( mm ) W dth ( mm ) W dth ( mm )
0,25 - 0,25
Cont nuous Anneal ng CCRS CCRSC
Steel Type General Appl cat on Steels for Draw ng
Batch Anneal ng BCRS BCRSC
COLD ROLLED PRODUCTS
Product Type
Form of Products
Sl tted Co l Sl tted and Cut to Length
Note:Th cknesses under 0.30 mm are subject to negot at on. Max mum w dth s 1300 mm. Orders between 1271 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Note:Th cknesses under 0.30 mm are subject to negot at on. The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Thickness Range : 0.16 – 0.60 mm
(Single Reduced, continuous or batch annealed tin coated products)
0.12 – 0.30 mm
(Double Reduced, continuous or batch annealed tin coated products)
Width Limits : 700 – 1300 mm
Coating Range : 1.1 – 11.2 g/m²
Standard : EN 10202:2001, ASTM A623M:2016
M n mum Max mum M n mum Max mum
700 1100 700 1100700 1169 700 1175700 1235 700 1175700 1255 700 1175
S ngle Reduce Batch Anneal ng
TNB TNBC
ELECTROLYTIC SINGLE REDUCED TINPLATE PRODUCTS
Product TypeForm of Products
Co l Cut to Length
S ngle Reduce Cont nuous Anneal ng
TNC TNCC
Steel Type Electrolyt c T n Coated Steels for Manufacture of Packag ng and T n Cans
S ngle Reduced and Batch Annealed T n Coated
Steels
TS230, TS245, TS260, TS275, TS290, TS340, MRT-1BA, MRT-2BA, MRT-3BA, MRT-4BA
S ngle Reduced and Cont nuous Annealed T n
Coated Steels
TH275, TH360, TH415, TH435, MRT-3CA, MRT-4CA, MRT-5CA
TH230, TH245, TH260
0,260 - 0,4490,450 - 0,600
Th ckness( mm )
W dth ( mm ) W dth ( mm )
0,160 - 0,2390,240 - 0,259
Note:Max mum w dth s 1300 mm. Orders between 1256 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Note:The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
M n mum Max mum M n mum Max mum
700 1100 700 1100700 1169 700 1100700 1235 700 1169700 1235 700 1235
Double Reduce Batch Anneal ng
DTNB DTNBC
ELECTROLYTIC SINGLE REDUCED TINPLATE PRODUCTS
Product TypeForm of Products
Co l Cut to Length
Double Reduce T n Coated
Double Reduce Cont nuous Anneal ng
DTNC DTNCC
Steel Type Electrolyt c T n Coated Steels for Manufacture of Packag ng and T n Cans
W dth ( mm )
Batch Anneal ng Cont nuous Anneal ng
TS480, TS520, TS550, MRDR-7.5BA, MRDR-8BA
TH520, TH550, TH580, TH620,TH520K, TH550K, MRDR-7.5CA, MRDR-8CA, MRDR-8.5CA,
MRDR-9CA
0,120 - 0,165
0,195 - 0,2150,220 - 0,300
0,170 - 0,190
Th ckness( mm )
Thickness Range : 0.20 – 2.00 / 3.00 mm
Width Range : 700 – 1300 mm
Coating Range : 60 – 600 gr/m²
Standard : EN 10346:2015, ASTM A653M:2015
Note:Th cknesses below 0.30 mm and th cknesses between 2.00-3.00 mm are subject to negot at on. Max mum w dth s 1300 mm. Orders between 1271 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
M n mum Max mum M n mum Max mum M n mum Max mum M n mum Max mum M n mum Max mum
700 1100700 1169700 1250700 1250 700 1175 700 1200700 1250 700 1175 700 1250 700 900 700 800700 1270 700 1175 700 1270 700 900 700 800700 1270 700 1175 700 1270 700 900 700 900700 1270 700 1270 700 1270 700 900 700 900700 1270 700 1270 700 1270 700 900 700 1000700 1270 700 1270 700 1270 700 1000 700 1000700 1270 700 1270 700 1270 700 1100 700 1000700 1270 700 1270 700 1270 700 1175 700 1100700 1270 700 1270 700 1270 700 1270
0,90 - 0,991,00 - 1,201,21 - 2,00
0,40 - 0,440,45 - 0,50
0,60 - 0,690,70 - 0,790,80 - 0,89
H gh Y eld Strength Dual-Phase
DX51D+Z DX52D+Z
CS TYPE B
DX53D+ZDX54D+ZDX56D+Z
0,51 - 0,59
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
HX260LAD+Z HX300LAD+Z
S350GD+Z
HX340LAD+ZHX380LAD+ZHX420LAD+Z
HCT590X
Th ckness( mm )
W dth ( mm ) W dth ( mm ) W dth ( mm ) W dth ( mm ) W dth ( mm )
0,20 - 0,230,24 - 0,25
Z nc CoatedGalvan zed Steels
Low Carbon Ultra Low Carbon Structural / H gh Strength and Low Alloyed
Structural / H gh Strength and Low Alloyed
0,30 - 0,390,26 - 0,29
Steel Type Z nc Coated Steels for Cold Form ng
HOT DIP ZINC COATED PRODUCTS
Product Type
Form of Products
Co l Tr mmed Edge Cut to Length Tr mmed Edge and Cut to Length
Cont nuous Galvan zed GCR GCRK GCRC GCRKC
M n mum Max mum M n mum Max mum M n mum Max mum M n mum Max mum M n mum Max mum
23 58123 62223 622 23 584 23 49723 622 23 584 23 497 24 447 25 39723 632 23 584 23 497 24 447 25 39723 632 23 584 23 497 25 447 26 44723 632 23 632 23 547 27 447 31 44723 632 23 632 23 597 28 447 32 49723 632 23 632 23 632 32 497 35 49724 632 24 632 24 632 35 547 39 49728 632 28 632 28 632 35 584 39 54735 632 35 632 35 632 39 584 39 54739 632 39 632 39 632 39 584 44 54739 632 39 632 39 632 44 63239 632 39 632 44 632 50 63239 632 39 632 47 632 54 63241 632 41 632 47 632 54 63241 632 41 632 47 632 54 63241 632 41 632 50 632 58 63244 632 44 632 54 632 64 63247 632 47 632 58 632 70 6321,90 - 2,00
W dth ( mm )
0,40 - 0,440,45 - 0,49
1,21 - 1,29
1,80 - 1,89
1,40 - 1,49
1,20 - 1,20
1,30 - 1,39
1,50 - 1,591,60 - 1,691,70 - 1,79
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
HX260LAD+Z HX300LAD+Z
S350GD+Z
HX340LAD+ZHX380LAD+ZHX420LAD+Z
HCT590X
W dth ( mm )
1,10 - 1,19
0,25 - 0,250,26 - 0,290,30 - 0,39
0,50 - 0,590,60 - 0,690,70 - 0,790,80 - 0,890,90 - 0,991,00 - 1,09
Th ckness( mm )
W dth ( mm )
HOT DIP ZINC COATED PRODUCTS
Product Type
Form of Products
Sl tted Co l Sl tted and Cut to Length
Cont nuous Galvan zed GCRS GCRSC
W dth ( mm ) W dth ( mm )
Steel Type Z nc Coated Steels for Cold Form ng
Z nc CoatedGalvan zed Steels
Low Carbon Ultra Low Carbon Structural / H gh Strength and Low Alloyed
Structural / H gh Strength and Low Alloyed
H gh Y eld Strength Dual-Phase
DX51D+Z DX52D+Z
CS TYPE B
DX53D+ZDX54D+ZDX56D+Z
Note:Orders below 0.30 mm th ckness are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Note:Orders below 0.30 mm th ckness are subject to negot at on. The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
5 R bs 6 R bs 5 R bs 6 R bs 5 R bs 6 R bs
800800 1000800 1000 800 800800 1000 800 800800 1000 800 1000 800800 1000 800 1000 800800 1000 800 1000 800 1000800 1000 800 1000 800 1000800 1000 800 1000 800 1000800 1000 800 1000 800 1000
1,00 - 1,091,10 - 1,20
0,40 - 0,490,50 - 0,590,60 - 0,690,70 - 0,790,80 - 0,890,90 - 0,99
0,26 - 0,39
Steel Type Z nc Coated Steels for Roof ng and Cladd ng
Z nc CoatedGalvan zed Steels
Low Carbon Ultra Low Carbon Structural
DX51D+Z DX52D+Z
DX53D+ZDX54D+Z
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
Th ckness( mm )
Cover W dth ( mm ) Cover W dth ( mm ) Cover W dth ( mm )
0,20 - 0,25
HOT DIP ZINC COATED PRODUCTS
Product Type
Form of Products
Trapezo d
Cont nuous Galvan zed GCRT
Thickness Range : 0.20 – 1.20 mm
Width Range : 700 – 1300 mm
Standard : EN 10346:2015, ASTM A653M:2015, EN 10169:2010
Pre-painted flat steel products are produced according to EN 10169:2010 standard. Galvanized steel grades
which are used as base metal produced according to EN 10346:2015 standard.
M n mum Max mum M n mum Max mum M n mum Max mum
700 1100700 1169700 1250700 1250 700 1175 700 1200700 1250 700 1175 700 1250700 1270 700 1175 700 1270700 1270 700 1175 700 1270700 1270 700 1270 700 1270700 1270 700 1270 700 1270700 1270 700 1270 700 1270700 1270 700 1270 700 1270700 1270 700 1270 700 1270
0,80 - 0,890,90 - 0,990,99 - 1,20
0,30 - 0,390,40 - 0,44
0,51 - 0,590,60 - 0,690,70 - 0,79
0,26 - 0,29
0,45 - 0,50
0,24 - 0,25
Steel Type Z nc and Organ c Coated Steels for Cold Form ng
Z nc and Organ c Coated Galvan zed Steels
Low Carbon Ultra Low Carbon Structural
DX51D+Z DX52D+Z
CS TYPE B
DX53D+ZDX54D+Z
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
Th ckness( mm )
W dth ( mm ) W dth ( mm ) W dth ( mm )
0,20 - 0,23
Cont nuous Galvan zed and Organ c Coated
ZINC and ORGANIC COATED (PRE-PAINTED) PRODUCTS
Product Type
Form of Products
Co l
PPG
Cut to Length
PPGC
Note:Orders below 0.30 mm th ckness are subject to negot at on.Max mum w dth s 1300 mm. Orders between 1271 - 1300 mm are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
M n mum Max mum M n mum Max mum M n mum Max mum
23 58123 58423 62223 622 23 584 23 49723 622 23 584 23 49723 632 23 584 23 49723 632 23 584 23 49723 632 23 584 23 49723 632 23 632 23 54723 632 23 632 23 59723 632 23 632 23 63224 632 24 632 24 63228 632 28 632 28 63235 632 35 632 35 63239 632 39 632 39 632
1,10 - 1,191,20 - 1,20
0,80 - 0,89
W dth ( mm ) W dth ( mm )
0,25 - 0,25
0,90 - 0,991,00 - 1,09
0,40 - 0,44
0,50 - 0,500,51 - 0,59
Th ckness( mm )
W dth ( mm )
0,70 - 0,790,60 - 0,69
0,30 - 0,39
0,45 - 0,49
Steel Type Z nc and Organ c Coated Steels for Cold Form ng
Z nc and Organ c Coated Galvan zed Steels
Low Carbon Ultra Low Carbon Structural
DX51D+Z DX52D+Z
CS TYPE B
DX53D+ZDX54D+Z
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
0,26 - 0,260,27 - 0,29
Cont nuous Galvan zed and Organ c Coated
PPGS PPGSC
ZINC and ORGANIC COATED (PRE-PAINTED) PRODUCTS
Product Type
Form of Products
Sl tted Co l Sl tted and Cut to Length
5 R bs 6 R bs 5 R bs 6 R bs 5 R bs 6 R bs
800800 1000800 1000 800 800800 1000 800 800800 1000 800 1000 800800 1000 800 1000 800800 1000 800 1000 800 1000800 1000 800 1000 800 1000800 1000 800 1000 800 1000800 1000 800 1000 800 1000
1,00 - 1,091,10 - 1,20
0,40 - 0,490,50 - 0,590,60 - 0,690,70 - 0,790,80 - 0,890,90 - 0,99
0,26 - 0,39
Steel Type Z nc and Organ c Coated Steels for Cold Form ng
Z nc and Organ c Coated Galvan zed Steels
Low Carbon Ultra Low Carbon Structural
DX51D+Z DX52D+Z
CS TYPE B
DX53D+ZDX54D+Z
S220GD+ZS250GD+ZS280GD+ZS320GD+Z
Th ckness( mm )
Cover W dth ( mm ) Cover W dth ( mm ) Cover W dth ( mm )
0,20 - 0,25
ZINC and ORGANIC COATED (PRE-PAINTED) PRODUCTS
Product Type
Form of Products
Trapezo d
Cont nuous Galvan zed and Organ c Coated PPGT
Note:Orders below 0.30 mm th ckness are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Note:Orders below 0.30 mm th ckness are subject to negot at on.The Customer Techn cal Serv ces should be contacted for techn cal quest ons not spec f ed n the table.
Top Related