AGFA GRAPHICS
TechNote
HQ - Mortsel
Company confidential ab
How to create Preps 6.x JDF for :APOGEE Prepress
:APOGEE Prepress 8.0
Urgency Classification Scope
As required Information only All devices ###
1. History
Document Version
Changes
1.0
2. Table of contents
1.History.................................................................................................................................................. 1
2.Table of contents .................................................................................................................................. 1
3.Introduction .......................................................................................................................................... 2
4.Preps requirements ............................................................................................................................... 2
5.Configuration ........................................................................................................................................ 3
5.1.Preps configuration ............................................................................................................................ 3
5.2.:APOGEE Prepress configuration ........................................................................................................ 7
6.Job creation in Preps ............................................................................................................................. 8
6.1.Technical Terms ................................................................................................................................. 8
7.Job Creation for JDF output .................................................................................................................... 9
8.Output to JDF .......................................................................................................................................11
2 of 11 HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS – :APOGEE PREPRESS 7.0
HQ - Mortsel TechNote - Company confidential
3. Introduction
The :APOGEE Prepress software can handle JDF from Preps 6.x and later. This document explains how you
need to setup Preps and :APOGEE Prepress to process a correctly imposed job. It also gives a brief
introduction on the use of Preps.
4. Preps requirements
Preps on OS to Apogee
Version 6.1 Windows7 (64 bit) APOGEE Prepress 7.0
Version 6.2.1 Windows7 (64 bit) APOGEE Prepress 8.0
HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS - :APOGEE PREPRESS 7.0 3 of 11
TechNote - Company confidential HQ - Mortsel
5. Configuration
5.1. Preps configuration
Share or mount a location where you want to save the JDF files. Make sure that it is accessible by the
:APOGEE Prepress server.
Share or mount a location where the content files reside. Make sure that it is accessible by the :APOGEE
Prepress server.
Choose ‘Edit’, ‘Preferences’. In the ‘Folders’ tab select the location where you want to save the JDF files.
4 of 11 HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS – :APOGEE PREPRESS 7.0
HQ - Mortsel TechNote - Company confidential
In the JDF tab, select all options below:
In the Output tab, disable ‘Output PS mark flats for PJTF/JDF’
HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS - :APOGEE PREPRESS 7.0 5 of 11
TechNote - Company confidential HQ - Mortsel
Save this as a profile, close Preps
Browse to ….\ Program Files\Kodak\Preps6\Profiles\Custom\Custom.cfg and open this file.
In this file search for all lines starting with –CJK_... and delete them.
Save this file.
Browse to ..\Program Files\Kodak\Preps6\Printers\ppd\PressSheetSize.ppd and open this file.
In this file search for all text ‘150’ and replace with ‘100’.
6 of 11 HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS – :APOGEE PREPRESS 7.0
HQ - Mortsel TechNote - Company confidential
Go to the end of this file and replace ‘105.0’ by ’15.0’ and ’90.0’ by ‘0.0’
Save this file.
Start Preps again
Choose ‘Resources’, ‘New Media’.
Select ‘Press Sheet Size’ as Media Type and give this Media a Nickname. Click OK.
Choose ‘PressSheetSize’ as size and click OK.
HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS - :APOGEE PREPRESS 7.0 7 of 11
TechNote - Company confidential HQ - Mortsel
5.2. :APOGEE Prepress configuration
JDF files from Preps can be used in :Apogee Prepress in 2 ways, depending on the system license.
With :Apogee Integrate, you can set the Impose Task Processor to ‘From input’ and import the output JDF
file, which we will create in the next chapters, in the JDF Import Taskprocessor.
In this way the content files are automatically imported as well and automatically placed in the correct
runlist positions.
With :Apogee Manage (and also :Apogee Integrate), you can set the Impose Task Processor to ‘From file’
and browse to the output JDF file which we will create in the next chapters.
In this way you can’t place the content files in Preps but you need to place them manually in the correct
runlist positions in :Apogee.
8 of 11 HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS – :APOGEE PREPRESS 7.0
HQ - Mortsel TechNote - Company confidential
6. Job creation in Preps
6.1. Technical Terms
A ‘Job’ contains all settings for a specific job. Every job is based on Pages and Signatures.
Every ‘Signature’ selected in a job is part of a ‘Template’. These templates are saved in the default Preps
‘Templates’ folder.
The ‘Marks’ that are used on the signatures are saved in the default Preps ‘Marks’ folder.
A ‘Signature’ contains a scheme that is made up with an ‘Imposition’ or with ‘Independent Pages’.
HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS - :APOGEE PREPRESS 7.0 9 of 11
TechNote - Company confidential HQ - Mortsel
7. Job Creation for JDF output
In the main window, go to the ‘Resources’ pane, select ‘Layouts’ and browse to the ’Templates/Folding
Pattern Templates/Metric/A4 Perfect.tpl/16 page SW…’ signature.
Double click on this signature to select it in the main window.
Select ‘Media’ and double click the created media (see chapter 5.1) to select it.
10 of 11 HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS – :APOGEE PREPRESS 7.0
HQ - Mortsel TechNote - Company confidential
Click the ‘Add’ button in the ‘Files’ section.
Browse to the content files you want to use and open them.
Select the pages that you want to use and drag them on the main window. Note that you need to release
the pages on the placeholder when it is shown in gray with a refresh icon.
HOW TO CREATE PREPS 6.X JDF FOR :APOGEE PREPRESS - :APOGEE PREPRESS 7.0 11 of 11
TechNote - Company confidential HQ - Mortsel
In 'Job', 'Job Notes’ specify following 'Notes' and click ‘OK’.
The ‘Content' from JobId will be used as ‘Order’ in :APOGEE Prepress.
The ‘Content' from Job_Title will be used as ‘Job’ in :APOGEE Prepress.
Save the job by choosing ‘File, ‘Save’.
8. Output to JDF
Choose ‘File’, ‘Print’.
Choose ‘Send to: JDF’ and make sure the correct ‘Media’ is selected..
Click ‘Print’.
Save the ‘JDF’ on a shared or mounted location which is accessible by the :APOGEE Prepress server.
Note: Preps generates at the root a ‘JDF’ file and a ‘JDFMarksFlats’ folder. This folder contains a ‘PDF’ file
with the marks inside. The content files remain on the shared or mounted location.
Depending on the license, import these files in the JDFImport Task Processor or select the JDF file in the
Impose Task Processor.
Top Related