Fluid Process Controls
Mobile/Marine Hydraulics
Industrial Hydraulics
• NFPA, custom and stainless steel cylinders• Hydraulic power units and control systems• Directional, proportional and servo valves• Fixed and variable volume pumps• Rotary actuators• Accumulators, intensifi ers and boosters• Cartridge valves and manifold systems• Flow control and pressure control valves• High torque low speed and high speed motors• Electronic motion controllers
• Pneumatic electric operated rotary valve actuators• Proportional fl ow / two, three way• Fuel management systems• Solenoid inline valves• Angle body valves• Solenoid plug-in valves• Direct acting / piloted process valves• Brass / stainless / explosion proof
• Tie rod, welded, telescopic, standard and custom cylinders• Cartridge valve integrated manifold systems• Inline pressure, suction, return fi lters• Hydrostatic steering systems• Gear, piston and vane pumps• IQAN integrated electronic control systems• Low speed, high torque, wheel, winch and drive motors• Manual, solenoid, proportional, stacking valve assemblies
Precise and Reliable Control Solutions
Multi-Media Directional / Proportional Solutions
End-to-End Mobile System Solutions
3
• Vacuum / generators, transducers, sensors, gauges• Valves / serial interface, manifold, modular design• Aluminum extrusion / full design, assembly• Actuators / rotary, slides, guides, grippers• Roller screw and linear actuators• Engineering and fabrication services• AC servo and stepper motors• Air preparation / I/P, E/P, modular, stainless• Cylinders / NFPA, ISO, compact, rodless, stainless• Pneumatic proportional solutions
• Extruded & precision cut, fabricated elastomeric seals• Metal & plastic retained composite seals• Elastomeric o-rings & custom molded shapes• Hydraulic & pneumatic seals, wiper & rings• Thermal & EMI shielding products• High temperature metal seals• PTFE seals & custom products• Medical tubing, sanitary gaskets
• Valves: ball & plug, check, metering, needle• Precision regulators & diaphragm valves• Compression & welded tube fi ttings• Gas analysis systems• Manifold mounted valve systems• Sanitary fi ttings, gaskets & valves• Tubing: seamless, welded, tube clamps & tray
Integrated Multi-Axis System Solutions
Engineered Sealing Solutions
High Performance Leak-Tight Fittings & Valves
Pneumatic/Electro-Mechanical Automation
O-Rings, Seals, Gaskets, & Custom Moldings
Instrumentation Fittings & Valves
4
Electrical/Electronics
Filtration
Hose, Tubing & Fittings
• Hydraulic tube fi ttings and adapters• Industrial hose and couplings• Hydraulic hose and fi ttings• Quick disconnect couplers• Inch & Metric sizes• Hose assembly fabrication• Pneumatic tubing and fi ttings• Fabrication tools and equipment
• PLC and Operator Interface• Safety devices: light curtains, keyed door interlocks• AC motors and AC servo motors, stepper motors• Motor controls & AC drives• Photo electric, proximity & ultrasonic switches• NEMA enclosures: steel, stainless steel & fi berglass• Terminal blocks, DIN rail, power supplies • Engineering and fabrication services
• Multi-media process fi ltration• Portable purifi cation / vacuum dehydrator units• Suction, pressure, return line fi lters• Fluid analysis services• Reservoir accessories• Electronic particle counter devices• Competitive interchangeable elements• Inline, tank-mounted, manifolded and duplex style fi lters
Leak-Free Plumbing Solutions
Precise System Control, Monitoring & Measuring
Managing System Component Reliability
5
THG CorporationThe THG Corporation, through its subsidiaries, The Hope Group, Hope Air Systems and Sorensen Systems, has established a reputation for identifying and implementing innovative design and system solutions utilizing its core competencies in hydraulics, pneumatics, automation, instrumentation, electrical/electronics, fl uid connectors and controls.
The companies have designed, built and installed hydraulic power units, skid-based PSA nitrogen generators, compressed air systems, skid-based pumps, ball valve controllers, positioning tables and more for customers throughout North America and around the world including China, South America, Europe, Africa and the Middle East.
6
The Hope Group LLC
For over 80 years, the motion control specialists at The Hope
Group have been providing solutions to the OEM and MRO
requirements of its industrial, marine and mobile customers. As
an authorized Parker distributor, The Hope Group has earned
three specialized designations as Hydraulic, Pneumatic and Mobile
Technology Centers.
Operating from its ISO 9001:2008 and ITAR Registered, 60,000 square foot headquarters
and manufacturing facility in Massachusetts, The Hope
Group specializes in the design and fabrication of motion and
control systems for the defense, power generation, life sciences, semiconductor, marine/mobile,
pulp & paper and machinery manufacturing markets.
The world’s fi rst transportable truck dumper, which tips semi-tractor
trailers into the air was developed using three hydraulic pumps; the
fi rst powering the heavy-duty lifting cylinders, another drives the outriggers
or “jackuators” that level and support the rig; the third pump drives a hydraulic
motor-driven generator for lighting.
A national manufacturer of high technology equipment required a
large volume of color coded coolant hose assemblies. Hose assemblies
were assembled, labeled, and inspected in our ISO compliant facility;
then kitted into specially designed packaging and shipped “just-in-time” directly to the manufacturing work cell.
Hydraulic Trailer Tipper
Hose Sub-Assemblies
7
Hope Air Systems LLC
For over 40 years, Hope Air Systems has operated as the capital equipment distributor for THG Corporation. Featuring Kaeser Compressor rotary-screw compressors, it also provides complete package system design and fabrication for oil-free compressors, high purity nitrogen generators and PET bottle-blowing systems.
Service/AuditsTo support its customers, Hope Air Systems offers 24 hour emergency service, comprehensive preventive maintenance programs and comprehensive supply/demand side audits for compressors, hydraulics, process cooling and nitrogen systems, which provide logical checklists for energy conservation.
A recently installed energy recovery solution transforms excess pipe pressure and fl ow into clean “green” power. This water-to-wire energy recovery project at a municipal water
treatment plant utilizes two turbine generators and custom electrical control
panels permitting remote control operation.
Energy Recovery Solution
8
Sorensen Systems LLC
Sorensen Systems, which was establisted originally by
THG Corporation through the acquisition of Sorensen
Governor, now provides global solutions for clean water,
renewable energy sources, and technologically advanced process systems for industry.
Sorensen Systems focuses its engineering and manufacturing
capabilities on the oil & gas, power generation, municipal
water and waste-water industries worldwide.
Additionally, Sorensen Systems’ team of engineers, technicians,
fabricators and fi eld service personnel are ready to design, fabricate, install and maintain a wide range of custom hydraulic, pneumatic or electromechanical
machine control systems.
9
Air Compressor Systems
Field Service Solutions
PET Bottle Blowing
Plant engineers, maintenance managers and compressor operators have relied on Hope Air Systems for over 40 years as a primary supplier of rotary, reciprocating, centrifugal, oil-free, packaged, and PET air compressor systems and accessories. The engineers and technicians at Hope Air Systems focus on more than equipment alone; the true value for its customers rests with its emphasis on energy management, air quality, reduced down time, leak detection and the solutions that bring signifi cant cost savings.
Industrial hydraulic power units and pneumatic or compressed air systems require periodic maintenance to operate at peak effi ciency and to reduce costly downtime. Inadequate maintenance can increase energy consumption due to lower compression effi ciency, air leakage or pressure drops. Poor maintenance can also lead to high operating temperatures, poor moisture control, excessive contamination, and unsafe working environments. Generally, each of these starts as a minor issue, but can mushroom into big trouble if undetected and untreated.
Stretch blow molding at the point of application that is clean, dry and the proper pressure and volume to meet PET bottle blowing requirements is standard operating procedure for Hope Air Systems’ skid-mounted compressed air packages. With more than 300 successful PET installations worldwide and over 30 years of continuous design, fabrication, and maintenance of these systems, you have found your best source for PET compressed air solutions.
System Design, Installation & Maintenance
Hydraulic, Compressed Air, Vacuum
Complete Skid-Mounted Packages
10
Each branch location of The Hope Group features a wide range of products
specifi cally designed to support the industry most prevalent in its region. For example, our coastal locations are ideally suited to support boat builders, boat yards, marinas, boat repair facilities and general marine businesses; you
can be sure our stores stock to meet your needs.
Through implementation of iZap technology, which automates the
reordering and replenishment of frequently used materials, users are able to lower overall supply chain costs, while increasing turns and cash fl ow. The iZap process employs barcode scanning technology and an
Internet-based transaction platform eliminating the need for
specialized software.
Innovative technology developed by iPower provides supply chain
solutions for OEM customers by consolidating supply bases,
reducing material costs, reducing WIP inventory
and slashing lead times. In addition, iPower helps reduce
manufacturing overhead to procure, receive and handle
thousands of inventory and expense items.
Through the use of EDI (electronic data interchange) we offer speedy order
processing, invoicing and shipping. For customers who prefer, we
offer our t-commerce electronic shopping cart service with next
day delivery of in-stock and two-day delivery on other items
through our national $150m DistraNet system. Invoicing is
offered via email or fax too.
HopeDirect.com allows customers to drill down from general product
categories, such as Hydraulics or Pneumatics, to specifi c product types, such as Cylinders and Valves, and then to the size and price for each item. Current customers may charge items to their account and guest customers may use
a credit card.
Our seven Parker Stores have 3,000 parts on hand, backed by
a $150m DistraNet inventory, to provide customers with access to the fastest, most immediate local
replacement of any ruptured hydraulic hose assembly up to 2-inch inside-diameter and six-
wire braid; plus, no better source for any hydraulic and industrial
hose, fi ttings and adapters.
Supply Chain Solutions
Specifi c Branch Inventory
Vendor Managed Inventory
Electronic Ordering/Invoicing HopeDirect.com
Hose & Fittings Stores
11
THG Corporation70 Bearfoot Road Northboro, MA 01532Tel: 508-393-7660 Fax: 508-393-8203
Bangor, ME
Lewiston, ME
Portland, ME
Manchester, NH
Fitchburg, MA
Northborough, MA
Cranston, RI
BanBan
LL
C tt RIranston RI
Weymouth, MA
ParkerStore - Portland 5 Wallace Avenue, S. Portland, ME 04106 Tel: 207-774-6266 Fax: 207-774-4735
ParkerStore - Bangor 257 Perry Road, Bangor, ME 04401 Tel: 207-942-7475 Fax: 207-941-9875
ParkerStore - Lewiston 14 Enterprise Street, Lewiston, ME 04240 Tel: 207-783-9108 Fax: 207-782-8634
ParkerStore - Manchester 880 Candia Road, Manchester, NH 03109Tel: 603-622-4998 Fax: 603-622-4667
ParkerStore - Fitchburg 58 Crawford Street, Fitchburg, MA 01420 Tel: 978-342-6817 Fax: 978-345-7604
ParkerStore - Weymouth 50 Finnell Drive, Weymouth, MA 02188Tel: 781-803-2572 Fax: 781-812-2641
ParkerStore - Cranston 215 Niantic Avenue, Cranston, RI 02907 Tel: 401-943-1577 Fax: 401-943-8808
Visit HopeDirect.com for direct purchases of Parker hydraulic, pneumatic, automation, hose & fi ttings, instrumentation, fi ltration, and valves
HopeDirectTHG CORPORATION ONLINE ORDERING SYSTEM
www.TheParkerStore.com
Top Related