483
487
491
503
485
488
492
DEAD BLOW HAMMERS
PLASTIC AND RUBBER MALLETS AND HAMMERS
BALL PEIN & CLAW HAMMERS
DRILLING & SLEDGE HAMMERS
HOLLOW PUNCH SETS
CHISELS, PUNCHESAND DRIFT PINS
ALIGNMENT BARS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
476
TECHNICAL STANDARDS
B107.53M “Ball Pein Hammers: Safety Requirements”B107.56 “Body Repair Hammers: Safety Requirements”B107.54 “Heavy Striking Tools: Safety Requirements”B148.97 “Aluminum - Bronze Sand Casting”
B107.47M “Metal chisels: safety requirements”B107.48M “Metal Punches and Drift Pins Safety Requirements”
GGG-H-86-C “Hammer (Forged steel head)”
GGG-C-313C “Chisels, hand: cape, diamond point, cold, round nose and side Cutting”GGG-C-330C “Chisels. Tools blanks, Caltiking Tools and metal-forming Tools, Power Hammer”GGG-B-101E “Bars, Chisel, Pinch, Pry, Wrecking; digging; tamping, Digging, And Crowbars”GGG-P-831E “Punches; Center, coopers, drive pin, Aligning, and prick”GGG-P-833A “Punches, Cutting”
DIN7462: 1970-05 “Wooden hammers”DIN7482: 1966-11 “Wooden handles for eyed wood bits”DIN5130: 1974-02 “Copper hammers”
DIN5138: 1973-03 “Chisel Handles”DIN5139: 1973-03 “Firmer chisels with tang”DIN5143: 1973-03 “Mortise chisel”DIN5154: 1973-03 “Chisels; technical specifications”DIN5155: 1973-03 “Chisels; denominations”DIN6450: 1984-11 “Pin punches”DIN6451: 1985-01 “Cape chisels”DIN6453: 1984-11 “Flat chisels”DIN6455: 1984-11 “Grooving chisels”DIN6458: 1984-11 “Drift punches”DIN7200: 1968-03 “Hollow punches”DIN7250: 1984-11 “Center punches”DIN7254: 1984-11 “Mason chisels”DIN7255: 1984-11 “Engineers’ cold chisels and allied tools; technical specifications”DIN7256: 1984-11 “Pointed chisels”
HAMMERS AND MALLETS APPLICABLE STANDARDS FOR: APPLICABLE STANDARDS FOR:
CHISELS, DRIFT PINS & PUNCHES
URREA manufactures its tools according to technical product standards.
A technical product standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or government bodies and associations.
The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards. There are various associations that issue or used to issue standards, such as GSA/US FEDERAL, ASME, ANSI, ISO; similarly, in Europe there is DIN (Deutsches Institut für Normung e.V.) German Institute for Standardization,
which groups together different organizations and committees dedicated to promoting the standardization and quality of products commercialized in Germany.
The hand tool standards, known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI.
Nowadays, ASME standards for hand tools are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME.
SAE standards (in particular are those applicable to the aerospace industry) are stricter standards, that for the most part, demand smaller tool dimensions and greater resistance.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
477SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
TECHNICAL STANDARDS
STRIKING AND TENSION TESTS FOR HAMMERS AND MALLETSASME B107.53M, B107.56 & B107.54 STANDARDS
STRIKING TEST TENSION TEST DEVICE
Consists of striking the tested hammer or mallet on a steel block a set number of times. The steel block must have a hardness between 92 and 105 °HRb. The tool's strike faces must not show any marks, fractures or deformations, or any type of failure.
After the striking test, the tool undergoes a tension test where a given force is applied parallel to the handle. The head must withstand the force without coming apart from the tool.
RESULTADOS PRUEBA DE TENSIÓN MARTILLOS Y MARROS
1000
Lower Spec
2000 3000 4000 5000 6000
RESULTS
HAMMER AND MALLET TENSION TEST RESULTS
BALL PEIN HAMMER TENSION PERFORMANCE
ASME/ANSILB-INCH
RESULTSDESEMPEÑO DE TENSIÓN DE MARTILLOS DE BOLA
0 500
1,00
0
1,50
0
2,00
0
2,50
0
3,00
0
3,50
0
1324-PN1332-PN1340-PN
Lbf.
Lbf.
ASME/ANSILB-PULG
ASME/ANSILB-PULG
DESEMPEÑO DE MARROS DE ACERO
0 50,0
00
100,
000
150,
000
200,
000
250,
0000
1433G1434G1435G1436G1437G
Lbf=Pounds force
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
478
TECHNICAL STANDARDS
HAMMER AND MALLET HARDNESS TESTSASTME 18 STANDARD
A Rockwell hardness tester is used for this test. A load perpendicular to the testing surface is applied and the result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18).
HARDNESS TEST PRESS
FLEXION TEST
SHORT-TERM CAPABILITY
HARDNESS READINGS' STATISTICAL TEST PERFORMED ON URREA HAMMERS DUREZAS MEDIDAS EN MARTILLOS
45
Lower Spec Upper Spec
47 49 51 53 55 57 59
RESULTS
OpCPUCPLOpkOpm
16.9221.9311.9111.91
*
TargUSLLSLkn
*60.00045.0000.296
25.000
MeanMean+3sMean-3ss
50.280050.723349.83670.1478
%>USL ExpObs
%<LSL ExpObs
0.000.000.000.00
PPM>USL ExpObs
PPM<LSL ExpObs
0000
FLEXION TESTS FOR HAMMERS AND MALLETSASME B107.53M, B107.56 & B107.54 STANDARDS
In this test the tool's head is firmly fastened. The other end is suspended and is positioned perpendicular to the grip. In the testing device, one of the strike faces will be positioned face down and a load will be applied on the handle's end, where users normally hold it, about 10" from the head's farthest point.The hammer or mallet must resist this test without breaking or fracturing.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
479SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
SPECIFICATIONS AND STANDARDS
HARDNESS TEST FOR CHISELS, PUNCHES, & DRIFT PINS
IMPACT TEST FOR CHISELS IMPACT TEST FOR DRIFT PINS
ASTME 18 STANDARDThis hardness test must be done on the striking area as well as on the cutting end. The test is performed using a Rockwell hardness tester, which features a diamond tip upon which a load perpendicular to the testing surface is applied. The result directly depends on the diamond tip's penetration into the tested element (According to ASTME 18).The hardness on the cutting end must be measured at no less than 1/4" from the edge.
HARDNESS TEST PRESS
IMPACT TEST IMPACT TEST
HARDNESS READINGS' STATISTICAL TESTS PERFORMED ON URREA CHISELS
OpCPUCPLOpkOpm
2.763.561.951.95
*
TargUSLLSLkn
*60.000048.00000.2917
12.0000
MeanMean+3sMean-3ss
52.250054.426050.07400.7253
%>USL ExpObs
%<LSL ExpObs
0.000.000.000.00
PPM>USL ExpObs
PPM<LSL ExpObs
0000
The chisel must be vertically mounted on a 1/4" diameter bar. The chisel's cutting line must form a 90° angle with the shaft's centering line.The bar must rest on a steel block weighing at least 200 lb (91 kg) and have a 35 HRc.The chisel is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other type of damage, or failure.
The chisel must be vertically mounted on a 1/4" thick steel plate with 45-50 HRc hardness.The plate must rest on a steel block at least 200 lb (91 kg) in weight and have a 35 HRc minimum hardness.The drift pin is struck by a load according to its size. The load must be a piece of steel with a 45-60 HRc hardness. After repeating the impact 20 times, no fracturing or chipping should be visible, or any other any other type of damage, or failure.
DUREZAS MEDIDAS EN CINCELES
Lower Spec Upper Spec
49 51 53 55 57 59
RESULTS
SHORT-TERM CAPABILITY
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
480
QUICK SELECTION GUIDE FOR STRIKING TOOLS
STRIKING TOOLS
www.urreaprofessionaltools.com
(800) 366-6911
For your convenience the
products in this catalog can be
found on our Website at www.
urreaprofessionaltools.com, a
quick and free service available
24 hours a day. Thanks to its
specialized search engine you
can quickly and easily find the
products you are looking for.
VISIT US ONLINE
HEAD WEIGHT
DRILLING & SLEDGE DEAD BLOWBRONZE
INTERCH. FACERUBBER BALL PEIN BODYWORKPLASTICSET RUBBER
23 4 6 8 10 12 16 3.6 7 8 12 13 16 18 22 24 26 29 32 36 38 40 444854
1433GFV
1430FV
1432FV
1430DBX 1332FV 1332P 1332PN1332E1430
1432
1436DB
1439DB
1435DB
1383SF150HK SF150 1434PDB
1435PDB1326DB
1336DB
1344DB1348DB 1432DB 1348P 1348PN
1430DB1340FV 1340P 1340PN
1324FV 1324P 1324E 1324PN
1367
1366
1368
1316P 1316PN 1421
1428
1424
1364 1427
1308FV1312FV
1316FV
1308P1312P
1308PN1312PN
1438GFV1439GFV1440GFV 1440G
1438G1439G
1434GFV1435GFV1436GFV1437GFV 1437G
1436G1435G1434G1433G
490PAGE
488PAGE
489PAGE
488PAGE
488PAGE
487PAGE
487PAGE
487PAGE
486PAGE
486PAGE
486PAGE
486PAGE
485PAGE
485PAGE
485PAGE
484PAGE
484PAGE
483PAGE
483PAGE
LB
OZ
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
481SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
QUICK SELECTION GUIDE FOR STRIKING TOOLS
STRUCK TOOLS
3/16”1/4”
1/4” x 1/16”1/4” x 3/32”
5/16”5/16” x 1/8”5/16” x 5/32”
3/8"3/8” x 3/16”3/8” x 5/32”
7/16”7/16” x 7/32”
1/2”1/2” x 1/4”1/2” x 5/16”
1/2” x 7”5/8”3/4”
3/4” x 8”3/4” x 12”7/8” x 8”7/8” x 12”
1” x 8”1” x 12”
SIZE
PUNCHESCENTERING
90ODRILLING
50O
CHISELS
50-3/16
50-5/16
86A-3/1641-1/4
41-5/16
41-3/8
41-7/16 44-7/16
41-1/2 44-1/2
41-5/8 44-5/849920
49922
96-5/896-3/4
86A-5/8
86A-3/4X886A-3/4X1286A-7/8X8
86A-7/8X1286A-1X8
86A-1X12
76-5/8
96-1/2 50-1/2
44-3/8
44-1/4
44-5/16
96-1/4
96-5/16
96-3/8
96-7/16 50-7/16
50-3/8 86A-3/8
86A-5/16
86A-7/16
86A-1/2 76-1/2
76-3/8 72-3/8
47-1/4X1/1647-1/4X3/32
47-5/16X1/847-5/16X5/32
48-3/8X3/16 47-3/8X3/1648-3/8X5/32
48-7/16X7/32
48-1/2X5/1648-1/2X1/4 47-1/2X1/4
47-7/16X7/32
50-1/4 86A-1/4 76-1/4
76-5/16 72-5/16
72-1/4
500PAGE
500PAGE
500PAGE
497PAGE
497PAGE
496PAGE
496PAGE
498PAGE
498PAGE
492PAGE
URREA tools are designed to
offer precision, quality and
endurance.
They are made by highly
qualified employees.
They are marked with the
country of origin, following
the strictest quality
standards.
www.urreaprofessionaltools.com
(800) 366-6911
THE BEST WARRANTY
PNEUMATICTOOLS
HAND TOOLS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
482
QUICK SELECTION GUIDE FOR STRUCK TOOLS
STRUCK TOOL SETS
SHORTGUIDEPUNCHES
CHISELS
NO.4
6
NO.6
NO.5
NO.2
86D
96A
86B
47A
50A
NO.4
NO.3
48A
99B
41A
86C
86A
4990
3
26P
IECE
S
16P
IECE
S
12P
IECE
S
10P
IECE
S
10P
IECE
S
7PI
ECES
7PI
ECES
7PI
ECES
6PI
ECES
5PI
ECES
5PI
ECES
5PI
ECES
5PI
ECES
5PI
ECES
5PI
ECES
5PI
ECES
3PI
ECES
SIZECODE
BRONZEPUNCH
CENTERPUNCHES
PINPUNCHES
LONGGUIDEPUNCHES
499204992286A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X841-1/441-5/1641-3/841-1/241-5/844-5/1644-3/848-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/1647-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/496-1/496-5/1696-3/896-7/1696-1/296-5/896-3/450-3/1650-1/450-5/1650-3/850-7/1650-1/2
1/2”3/4”3/16”1/4”5/16”3/8”7/16”1/2”5/8”3/4” x 8”7/8” x 8”1” x 8”1/4”5/16”3/8”1/2”5/8”5/16”3/8”3/8” x 5/32”3/8” x 3/16”7/16” x 7/32”1/2” x 1/4”1/2” x 5/16”1/4” x 1/16”1/4” x 3/32”5/16” x 1/8”5/16” x 5/32”3/8” x 3/16”7/16” x 7/32”1/2” x 1/4”1/4”5/16”3/8”7/16”1/2”5/8”3/4”3/16”1/4”5/16”3/8”7/16”1/2”
492PAGE
499PAGE
499PAGE
498PAGE
496PAGE
495PAGE
494PAGE
494PAGE
495PAGE
495PAGE
499PAGE
495PAGE
499PAGE
494PAGE
493PAGE
493PAGE
493PAGE
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
483SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
BRONZE HAMMERS
STRIKING TOOLS
BRONZEHAMMER WITHFIBERGLASSHANDLE
STANDARD: FEDERAL GGG-H-33a
1430FV1432FV
CODE FACE DIAMETER
HEAD LENGTH
TOTAL LENGTH
L WEIGHT
mm34.950.8
in.1 3/8
2
mm87.395.2
in.3 7/163 3/4
mm342.9355.6
in.13 1/2
14
gm8121750
lb.1.793.85
1432FV
Bronze head does not deform stricken materials.
Fiberglass ergonomic handle
Bronze hammers do not give off sparks when striking other metals, making them a very safe tool for use in flammable environments or for precision
work such as bushings, transmissions, etc.
1432
BRONZEHAMMER WITHWOODENHANDLE
STANDARDS: FEDERAL GGG-H-33a
14301432
CODE FACE DIAMETER
HEAD LENGTH
TOTAL LENGTH
L WEIGHT
mm34.950.8
in.1 3/8
2
mm87.395.2
in.3 7/163 3/4
mm342.9355.6
in.13 1/2
14
gm.8851700
lb.1.953.74
Impact-resistant oak handle.
DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
484
OCTAGONALSLEDGEHAMMER WITHFIBERGLASSHANDLE
STANDARDS: FEDERAL GGG-H-86c, ASME B107.54
1433GFV1434GFV1435GFV1436GFV1437GFV1438GFV1439GFV1440GFV
CODE FACE DIAMETER
HEAD WEIGHT
HEAD LENGTH
HANDLE LENGTH
WEIGHT
mm4144525660646875
in.1 5/81 3/4
2 1/162 3/162 3/82 1/2
2 11/162 15/16
mm114130143152165175195214
in.4 1/25 1/85 5/8
66 1/26 7/8
7 11/168 7/16
mm387387387914914914914914
in.15 1/415 1/415 1/4
3636363636
gm11351620223034004300521061207930
lb.2.53.64.97.59.511.513.517.5
lb.23468
101216
STEELOCTAGONALSLEDGEHAMMER,AMERICANHICKORY36"HANDLE
STANDARDS: ASME B107.54, FEDERAL GGG-H-86
1436G1437G1438G1439G1440G
CODE FACE DIAMETER
HEAD WEIGHT
HEAD LENGTH
HANDLE LENGTH
WEIGHTmm5660646875
in.2 3/162 3/82 1/2
2 11/162 15/16
mm152165175195214
in.6
6 1/26 7/8
7 11/168 7/16
in.36 36 36 36 36
mm914914914914914
gm33404220514061007850
lb.7.49.311.313.417.3
lb.68101216
STEELOCTAGONALSLEDGEHAMMER,AMERICANHICKORY12"HANDLE
STANDARDS: ASME B107.54, FEDERAL GGG-H-86
1433G1434G1435G
CODE FACE DIAMETER
HEAD WEIGHT
HEAD LENGTH
HANDLE LENGTH
WEIGHTmm414452
in.1 5/81 3/4
2 1/16
mm114130143
in.4 1/25 1/85 5/8
in.121212
gm108515702150
lb.2.43.54.7
lb.234
ENGINEERSLEDGEHAMMERWITH AMERICANHICKORY16"HANDLE
STANDARDS: ASME B107.54, FEDERAL GGG-H-86
CODE FACE DIAMETER
HEAD WEIGHT
HEAD LENGTH
HANDLE LENGTH
WEIGHT
1433EG1434EG1435EG
mm414452
in.1 5/81 3/42 1/16
mm114130143
in.4 1/25 1/85 5/8
in.161616
gm143016802350
lb.3.23.75.2
lb.234
STRIKING TOOLS
STEEL OCTAGONAL SLEDGE HAMMERS
1435GFV
SPAREHANDLESFOR AMERICANHICKORYSLEDGEHAMMERS
CAB7UHCAB10UH
CODE TOTAL LENGTH
L
mm305914
in.1236
gm180675
lb.0.401.50
CAB10UH
1436G
1434G
1435G
1433G
1433EG
Standard eye
Double wedge hafting, with wood and metal.
USED IN:• Construction• Industrial Maintenance• Railroad Industry• Mining
NOTE:These are not non-spark sledge hammers.Not recommended in flammable, volatile, or corrosive environments.
Epoxy resin connection guarantees secure hafting.
• Carbon steel forged head, quenched and tempered.
• 50 HRc hardness.• Beveled and polished faces.
AMERICAN
HICKORY
AMERICAN
HICKORY
Includes wood and metal wedges
DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
485SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
INTERCHANGEABLE FACE DEAD BLOW HAMMERS
Super soft (gray)
Soft (brown)
Medium (red)
Rugged use (green)
Medium rough (beige)
Hard (black)
Extra hard (yellow)
Steel
Hammer
1 Plastic case
Faceassortment:C O N T E N T S
9 interchangeable faces, each with a different Shore or Rockwell hardness, measurement used to assign a hardness value on soft materials such as plastic, rubber, non-tempered steel, etc.
Thesehammershavetwomaincharacteristics.First,anydeformationsderivingfromthestrikeactionoccuronthehammerfacesandnotonthestrickenobject.Second,thehammer'shollowheadisfilledwithsteelshot.Thisshotworksasastrikevibrationdissipater,preventingthehammerfrombouncingwitheachblow,thuscreatingadeadblow.
Includes8faces
Strike deformations occur on the faces, not on the object.
SF15SS SF15M
SF15ST
SF15MH
SF15T
SF15XH
SF15H
SF16B
SF16S
16OZ.WITHINTERCHANGEABLEFACES
SF150HK
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.1 1/2
mm38.1
in.4
mm101.6
lb.1
oz.16
in.11 1/2
mm292.1
gm1374
TOTAL
lb.3.02
9-PIECE SET
INTERCHANGEABLEFACESFOR11/2”DEADBLOWHAMMERS
SF15SS
SF15STSF15MSF15TSF15MHSF15HSF15XHSF16SSF16B
CODE STRIKE FORCE
SUPER SOFT
SOFTMEDIUMRUGGED
MEDIUM HARDHARD
EXTRA HARDSOLIDSOLID
FACE COLOR
LIGHT GRAY
BROWNRED
GREENBEIGEBLACK
YELLOWSTEEL FACE
BRONZE FACE
PVC
PVCPVCPVC
POLYURETHANEPOLYURETHANEPOLYURETHANE
STEELBRONZE
HARDNESS MATERIAL
SHORE A INSTANTANEOUS, 45-58SHORE A 30 SEC, 45-58SHORE A 30 SEC, 59-72SHORE A 30 SEC, 59-73SHORE D 30 SEC, 40-48SHORE D 30 SEC, 49-65SHORE D 30 SEC, 65-86
38-46 HRC74-76 HRB
16OZ.DEADBLOWHAMMER(DOESNOTINCLUDEINTERCHANGEABLEFACES)
SF150
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.1 1/2
mm38.1
in.4
mm101.6
lb.1
oz.16
in.11 1/2
mm292.1
gm586
TOTAL
lb.1.29
Steel shot in side head.
Fiberglass handle with rubber grip minimizes
the vibration felt on the hand.
SF150
SF150HK
The dead blow hammer with interchangeable faces is mainly used in the assembly of machinery parts, where it is important that surfaces stricken do not
get damaged.
FIXED FACE DEAD BLOW HAMMER
Indestructible non-slip fiberglass handle with Super Grip.Reinforced faces.
HIGH-IMPACT,FIXEDFACE DEADBLOWHAMMER
1430DBX
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.2
mm50.8
in.5
mm127
lb.2
oz.32
in.13 3/4
mm349.2
gm907
TOTAL
lb.2.0
Non-slip, shock absorbtion handle
Indestructable fiber glass handle
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERSDEAD BLOW
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
486
DEAD BLOW IMPACT AND DEAD BLOW SLEDGE HAMMERS
The body is composed of a steel body with two fixed faces made of cellulose acetate, designed for use on metals and other materials susceptible to strike marks or deformations. The deformation is absorbed and occurs on the face, not on the stricken object.
HIGH-IMPACTHAMMER
1434PDB1435PDB
CODE
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L TOTAL
in.1 51/641 51/64
mm45.745.7
in.5 1/85 1/8
mm130.1130.1
lb.1
1.5
oz.1624
in.12 1/412 1/4
mm311.1311.1
gm454680
lb.1.001.50
1435PDB
The high-impact dead blow hammer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force.
HEAVY-DUTY HIGH-IMPACTHAMMER
1430DB1432DB
CODE
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L TOTAL
in.2
2 3/4
mm50.869.8
in.4 3/84 3/4
mm111.1120.6
lb.23
oz.3248
in.13 3/4
14 11/16
mm349.2373.0
gm9071360
lb.2.003.00
1432DB
• Made of one piece from high-impact polyurethane, resistant to chemicals.
• Head filled with steel shot is heavier.• Does not bounce or give off sparks.
DEADBLOWIMPACTSLEDGEHAMMERS
1435DB1436DB1439DB
CODE FACE DIAMETER
HEAD LENGTH
TOTAL LENGTH
L TOTAL
in.2 9/162 3/43 1/8
mm657080
in.5 7/167 3/32
8
mm138180203
in.15 1/8
2036 1/2”
mm385508927
gm164231755380
lb.3.67.011.9
• Body made of high-impact polyurethane, resistant to chemicals.
• Face and ball made of steel alloy.• Beveled strike face does not produce shrapnel.• Ball machined with accurate radii to deliver
better impacts.• Non-slip handle.• Handle's bottom features wide end cap to
prevent tool from slipping off hands.
DEADBLOWBALLPEINHAMMERS
1326DB1336DB1344DB1348DB
CODE HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L TOTAL
in.1.231.471.681.68
mm31374343
in.4.254.54.884.88
mm108114124124
in.12.75
1313.516.25
mm323330342412
gm737102112471361
oz.26364448
STRIKING TOOLS
1326DB
1439DB
• Does not damage any surfaces.• More resistant to cuts, indentations, and
abrasion than rubber hammers.• Flat faces deliver better strikes.• Non-slip handle.• Handle's bottom features a wide end cap to
prevent the tool from slipping off hands.• Ideal for any type of application.
1435DB
Fiber glass handle with rubber grip minimizes hand vibration
Heads are partially filled with steel shot
Steel shot inside head dissipates vibration
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERSDEAD BLOW
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
487SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
RUBBERHEADMALLET
136613671368
CODE
HEAD
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L TOTAL
in.1 25/322 3/162 5/8
mm45.255.566.6
in.3 1/163 3/44 1/2
mm77.795.2114.3
lb.0.51
1.4
oz.81622
in.12 1/214 1/2
16 19/32
mm317.5368.3421.8
gm.226454635
lb.0.501.001.40
STANDARDS: FEDERAL GGG-H-33a
RUBBER MALLETSMalletswithrubberheadsareidealformechanics,bodyworkers,brassworkersandcarpenters.Veryusefulforstrikinglargepieces
requiringspecialcare.
Oak handle provides excellent impact resistance.
Head made of neoprene rubber that delivers strong blows without
damaging the stricken object.
Cylindrical head delivers greater impact area.
1368
PLASTIC OR RUBBER FACE HAMMERS
1383FV will be included??
Fixedplasticfacehammersareusedforstrikingsoftmaterialsthatdonotrequirealotofforce.
INTERCHANGEABLEFACESFOR HAMMERSSF150AND1364
STANDARD: FEDERAL GGG-H-33b
1364XS1364T
CODE STRIKE TYPE
EXTRA SOFT RUGGED USE
FACE COLOR
DARK GRAYBEIGE
SIZE
1 1/2”1 1/2”
SHORE HARDNESS
6095
STANDARD: FEDERAL GGG-H-33a
HAMMERWITHINTERCHANGEABLE RUBBERFACES
1364
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.1 1/2
mm38.1
in.3 3/8
mm85.7
in. 12
mm304.8
gm385
TOTAL
lb.0.85
These faces can be used on hammers SF150 and 1364
1364XS 1364TExtra softgray face
Rugged use beige face
1364
FACTSHEETFOR1383HAMMERSWITHPLASTICFACES
FEDERALSTANDARD GGG-H-33a CHARACTERISTICS
1383
CODE
78
SHORE
HARDNESS A
25 13 360
STRIKE TYPE
PLASTIC FACES
HEAD OZ. HEAD gm.
FACTSHEETFOR1383FVHAMMERSWITHPLASTICFACES
FEDERALSTANDARD GGG-H-33a CHARACTERISTICS
1383
CODE
78
SHORE
HARDNESS A
25 13 360
STRIKE TYPE
PLASTIC FACES
HEAD OZ. HEAD gm.
Resistant plastic faces prevent hammer from
bouncing.
Plastic face with 95° Shore hardness for solid strikes.
Center cast in Zamak for solid impacts.
Plastic face with 60° Shore hardness for soft strikes.
Compact oak handle offers excellent
impact resistance.
1383
HAMMERWITHFIXEDPLASTICFACES
1383
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.1 5/6
mm33.3
in.3 15/32
mm88.1
in. 12
mm304.8
gm360
TOTAL
lb.0.79
STANDARDS: FEDERAL GGG-H-33a
HAMMERWITHFIXEDPLASTICFACESFIBBERGLASSHANDLE
1383FV
HEAD DIAMETER
HEAD LENGTH
TOTAL LENGTH
L
in.1 5/6
mm33.3
in.3 15/32
mm88.1
in. 12
mm304.8
gm350
TOTAL
lb.0.77
STANDARDS: FEDERAL GGG-H-33a
STRIKING TOOLS
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERSRUBBER MALLETS AND
PLASTIC FACE HAMMERS
Resistant plastic faces prevent hammer
bouncing.
Lower vibration through hand and arm.
Fiberglass handle, rubber covered.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
488
BALL PEIN HAMMERSBallpeinhammersallowyoutoworkonrivetsandmetalsurfaces.
POLISHEDBALLPEINHEAD WITHFIBERGLASSHANDLE
1308FV1312FV1316FV1324FV1332FV1340FV
CODE
HEAD
TENSION RESISTANCE
ASME B107.53MLB-INCH
TOTAL LENGTH
L TOTAL
STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53M NMX-O-103
in.11 1/412 1/2 12 1/2 14 1/414 1/4 15 3/4
mm286318318362362400
gm38454866297011971508
lbf150015002250225022502250
oz.81216243240
gm2273404546809071134
lb.0.841.211.462.142.643.32
BALLPEINHAMMERSFACTSHEET
ASMEB107.53MSTANDARD
CODE HARDNESSORC
TENSIONLBF
FLEXIONLBF
STRIKE
1308FV1312FV1316FV1324FV1332FV1340FV
45-6045-6045-6045-6045-6045-60
400400400100010001000
406080150150175
202020202020
POLISHEDBALLPEINHEAD WITHAMERICANHICKORYHANDLE
1308P1312P1316P1324P1332P1340P1348P
CODE
HEAD
TENSION RESISTANCE
ASME B107.53MLB-INCH
TOTAL LENGTH
L TOTAL
STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103
in.12 3/8
1414
16 1/416 1/4
1818
mm314356356413413454454
gm333522636912113914021629
lbf3800380042004200420042004200
oz.8121624324048
gm22734045468090711341361
lb.0.731.151.402.012.513.093.59
BALLPEINHAMMERSFACTSHEET
ASMEB107.53MSTANDARD
CODE HARDNESSORC
TENSIONLBF
FLEXIONLBF
STRIKE
1308P1312P1316P1324P1332P1340P1348P
45-6045-6045-6045-6045-6045-6045-60
75075022502250225022502250
406080150150175175
20202020202020
STRIKING TOOLS
Epoxy resin connection
guarantees secure hafting.
American Hickory handle, polished and
lacquered.
Forged and tempered steel alloy head,
polished and varnished.
1340FV 1332P
AMERICAN
HICKORY
1332FVS
Fiberglass handle with rubber grip minimizes the
vibration felt on the hand.
BLACKBALLPEINHAMMER WITHFIBBERGLASSHANDLE
1332FVS1324FVS
CODE
HEAD
TENSION RESISTANCE
ASME B107.53MLB-INCH
TOTAL LENGTH
L TOTAL
STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103
in.7 7/87 7/8
mm200200
gm11651010
lbf22502250
oz.3224
gm907680
lb.2.562.26
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
489SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
BALLPEINHAMMERSFACTSHEET
ASMEB107.53MSTANDARD
CODE HARDNESSORC
TENSIONLBF
FLEXIONLBF
STRIKE
1308PN1312PN1316PN1324PN1332PN1340PN1348PN
45-6045-6045-6045-6045-6045-6045-60
75075022502250225022502250
406080150150175175
20202020202020
BLACKBALLPEINHAMMER
1308PN1312PN1316PN1324PN1332PN1340PN1348PN
CODE
HEAD
TENSION RESISTANCE
ASME B107.53MLB-INCH
TOTAL LENGTH
L TOTAL
STANDARDS: FEDERAL:GGG-H-86C, ASME B107.53, NMX-O-103
in.12 3/8
1414
16 1416 1/4
1717
mm314356356413413432432
gm333522636912113914021629
lbf3800380042004200420042004200
oz.8
121624324048
gm227340454680907
11341361
lb.0.731.151.402.012.513.093.59
STRIKING TOOLS
Oak handle offers excellent impact
resistance.
Double heat-treated forged steel head. Hafted with metal and wood wedges to lock head and handle together.
Phosphatized head prevents corrosion.
1324PN
BALLPEINHAMMERSFACTSHEET
ASMEB107.53MSTANDARD
CODE HARDNESSORC
TENSIONLBF
FLEXIONLBF
STRIKE
1324E1332E
45-6045-60
10001000
150175
2020
BLACKBALLPEINHAMMER WITHERGONOMICHANDLE
1324E1332E
CODE
HEAD
TENSION RESISTANCE
ASME B107.53MLB-INCH
TOTAL LENGTH
L TOTAL
STANDARDS: FEDERAL: GGG-H-86C, ASME B107.53, NMX-O-103
in.16 1/416 1/4
mm413413
gm 9121139
lbf42004200
oz.2432
gm680907
lb.2.012.51
Ergonomic oak handle prevents slippage.
Forged steel alloy head, quenched and tempered,
blued finish.49 to 55 HRc hardness
on striking faces. Tempered eye.
1332E
CAB3UH
SPAREAMERICANHICKORYHANDLE FORBALLPEINHAMMERS
CAB1UHCAB2UHCAB3UHCAB4UH
CODE TOTAL LENGTH
L
HAMMERSin.12141618
mm305356406457
gm108130214266
TOTAL
lb.0.240.340.470.59
8 oz.12 & 16 oz.24 & 32 oz.40 & 48 oz.
SPAREOAKERGONOMICHANDLE1324EAND1332E
TOTAL LENGTH
L
HAMMERSin.16
mm406
gm200
TOTAL
lb.0.4 24 & 32 oz.
CAB6U
AMERICAN
HICKORY
Includes wood and metal wedges.
CAB6U
Includes wood and metal wedges.
Oak handle.
American Hickory handle.
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
490
STRIKING TOOLS
BODYWORK HAMMERSBodyworkhammersareusedtorepaircardents.Theirheadsfeatureradiiandgeometriesthatmaketheheadsfitverywellinthevariousshapesfoundinbodywork.
Square and round face hammer, quenched and tempered with 43-45 °RC. Smooths damaged metallic surfaces, especially corner areas.
SQUAREANDROUNDFACE HAMMER
1424
HEAD DIAMETER
HEAD LENGTH
mm31.7
in.4
mm101.6
in.1 1/4
gm350
TOTAL LENGTH
L
in. 13
mm330.2
lb.0.77
STANDARDS: FEDERAL GGG-H-20A, ASME B107.56
Hammer with round face and flat tip for finishes on edges and molds.
FLATTIPANDROUNDFACE HAMMER
1427
HEAD DIAMETER
HEAD LENGTH
mm34.9
in.4 1/2
mm114.3
in.1 3/8
gm322
TOTAL LENGTH
L
in. 12 1/4
mm311.15
lb.0.71
STANDARDS: FEDERAL GGG-H-20A, ASME B107.56
BLUNTPOINTANDROUNDFACE HAMMER
1428
HEAD DIAMETER
HEAD LENGTH
mm38.1
in.5 7/8
mm149.2
in.1 1/2
gm326
TOTAL LENGTH
L
in. 14
mm355.6
lb.0.72
STANDARDS: FEDERAL GGG-H-20A, ASME B107.56
Blunt point and round face hammer for smoothing out dents in metal sheets and deep areas.
BODYWORKHAMMER WITHTWOFACES
1421
FACE DIAMETER
HEAD LENGTH
mm31.7
in. 6
mm152.4
in.1 5/8
mm41.2
in.1 1/4
gm515
TOTAL LENGTH
L
in. 13 3/4
mm349.2
FACE DIAMETER
lb.1.14
STANDARDS: FEDERAL GGG-H-20A, ASME B107.56
BODYWORKHAMMERSFACTSHEET
ASMEB107.56STANDARD CHARACTERISTICS
CODE HARDNESSORC
TENSIONLBF
FLEXIONLBF
STRIKE
HEAD OZ. HEAD gm1421142414271428
45-6025-3025-3025-30
400400400400
256080150
20202020
13161616
368453453453
142814241427
Bodywork hammer with two round, flat faces. Features double heat-treated, steel alloy forged head. This hammer is ideal
for work on dents, wrinkles, undulations, and other bodywork damage.
Impact-resistant oak handle.
Also called a dingingor engravers hammer
These are also calledfinishing hammers
Also calleda dinging hammer
1421
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS BALL PEIN
HAMMERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
491SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
HOLLOW PUNCH SETS Hollowpunchsetsareusedtocutoutroundsectionsondifferentmaterials.Theirapplicationsareverydiverse.Forexample,theycanbe
usedtomakesealsforautomobilecrankcases,forhydraulicortoiletinstallations,etc.Thematerialsitcancutarepolyurethanefoam,rubber,cardboard,leather,andjointmaterials.
49902
49900
They are manufactured with high-carbon steel, with a 53 to 66 °RC hardness. Handles made of impact-resistant steel alloy. Polypropylene case.
This system was made so 2 or more hollow punches can be used at the same time.
It is used to cut out round shapes and rings to make foam, cardboard, leather,
rubber, fiber, plastic and lead seals, among other possible
materials.
1/8”TO2”INPLASTICCASE
49902
DESCRIPTION ACCESSORIES
TOTAL
in.1/8, 3/16, 1/4, 5/16, 3/8,7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4, 1 5/16, 1 3/81 7/16, 1 1/2, 1 5/8, 1 11/16, 1 3/4, 1 7/8, 2
gm2748Handle
adapterPlastic case
lb.6.06
27-PIECE SET
49901
1/8”TO3/4”INPLASTICCASE
49901
DESCRIPTION ACCESSORIES
TOTAL
in.1/8, 3/16, 1/4, 5/16, 3/8 7/16, 1/2, 9/16, 5/8, 3/4
gm598Handle
Plastic case
lb.1.32
11-PIECE SET
1/8”TO13/16”INPLASTICCASE
49900
DESCRIPTION ACCESSORIES
TOTAL
in.1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1 , 1 1/16, 1 1/8, 1 3/16
gm1120Handle
Plastic case
lb.2.47
16-PIECE SET49900M
3TO30MMINPLASTICCASE
49900M
DESCRIPTION ACCESSORIES
TOTAL mm
3 mm, 4 mm, 6 mm,8 mm, 10 mm, 12 mm,14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 28 mm, 30 mm.
gm1120Handle
Plastic case
lb.2.47
16-PIECE SET
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS HOLE PUNCH
SETS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
492
50900
FORSHEETMETAL,5/8”TO11/14” INPLASTICCASE
50900
STRIKING PUNCH
Øin.5/83/41
1 1/4
gm800
lb.1.76
WEIGHT
OPENING MATRIX
in.9/1619/3251/641 1/32
SCREWS
in.5/1625/6415/32
mm81012
mm1619
25.432
in.1
1 1/21 3/4
mm25.438.144.4
in.1/2
39/5914/19
mm131719
L THREAD OPENINGØ
7-PIECE SET
For medium steel and aluminum sheet metal, 10 gauge (3.5 mm)
STRIKING TOOLS
BRONZE DRIFT PUNCHESDriftpunchesareusedtoinstallorremovepins and rivets. Their length depends on thejobathand.Straightpunchescanalsobe used to align holes when assemblingparts.
End designed to withstand strikes.
Designed to prevent any damage of the stricken
object.
Does not strip or deform.
Knurled grasping area for a better grip.
BRONZEDRIFTPINS
49903 3-PIECE SET
DESCRIPTION
3/8”, 1/2”, 3/4” POUCHgm793
ACCESSORIES
TOTALlb.
1.75
49920
49903
BRONZEDRIFTPUNCHES
TIP DIAMETER
B
LENGTHL
TOTAL
4992049922
in.1/23/4
mm12.719.0
in.1/23/4
mm12.719.0
in.78
mm1720
gm.190485
SHAFT DIAMETER
B
CODE
lb.0.421.07
Saves time in perforation, serration, filing and manual adjustments.
Make burr-free, clean holes to install conduit pipes, controls, instruments and for sheet metal boxes.
Easy to use tools.Can be operated with a common wrench.
Assortment of hole punches for different hole sizes.
SHEET METAL HOLE PUNCH SETS
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS HOLE PUNCH
SETSCHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
493SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
DRIFTPINS,PUNCHES,ANDCHISELS
NO.46 26-PIECE SET
CODE SIZE
41-3/841-1/244-5/16
47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4
50-1/450-5/1650-3/850-7/1650-1/2
86A-3/1686A-1/486A-5/1686A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X8
96-5/1696-3/896-1/2
E516
3/8 x 1/81/2 x 3/165/16 x 7/64
1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/167/16 x 7/32
1/2 x 1/4
1/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/32
1/2 x 1/4
1/4 x 3/161/4 x 1/4
5/16 x 5/167/16 x 7/16
1/2 x 1/25/8 x 5/83/4 x 3/47/8 x 1
1 x 1 3/16
5/16 x 1/83/8 x 3/161/2 x 1/4
Pouch
9.5 x 3.212.7 x 4.87.9 x 2.8
6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.811.1 x 5.612.7 x 6.4
6.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4
6.4 x 4.86.4 x 6.47.9 x 7.9
11.1 x 11.112.7 x 12.7 15.9 x 15.919.1 x 19.122.2 x 25.425.4 x 30.2
7.9 x 3.29.5 x 4.812.7 x 6.4
in. mm
DRIFTPINSANDPUNCHES
NO.6 16-PIECE SET
CODE SIZE
47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-1/2X1/4
50-1/450-1/450-5/1650-3/850-7/1650-1/2
96-3/896-1/2
41-3/841-1/244-3/8
E514
1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/161/2 x 1/4
1/4 x 1/161/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/4
3/8 x 3/161/2 x 1/4
3/8 x 1/81/2 x 3/163/8 x 5/32
Pouch
6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.812.7 x 6.4
6.4 x 1.66.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4
9.5 x 4.812.7 x 6.4
9.5 x 3.212.7 x 4.89.5 x 4.0
in. mm
DRIFTPINS,PUNCHESANDCHISELS
NO.5 12-PIECE SET
CODE SIZE
47-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/16
50-5/1650-3/8
96-3/4
41-3/8
86A-3/1686A-5/1686A-7/1686A-1/2
E519
1/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/16
5/16 x 1/83/8 x 3/16
3/4 x 3/8
3/8 x 1/8
1/4 x 3/165/16 x 5/167/16 x 7/161/2 x 1/2
Pouch
6.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.8
7.9 x 3.29.5 x 4.8
19.1 x 9.5
9.5 x 3.2
6.4 x 4.87.9 x 7.9
11.1 x 11.112.7 x 12.7
in. mm
Combinationsetsmakeanexpert'sworkeasier.Manufacturedwithtempered,micro-alloysteel.Hexagonalbodydesign.
COMBINATION SETS OF
CHISELS, PUNCHES AND DRIFT PINS
NO.46 NO.6 NO.5
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
494
STRIKING TOOLS
CHISELS,DRIFTPINSANDPUNCHES
NO.2 10-PIECE SET
CODE SIZE
41-3/8
47-1/4X3/32
47-5/16X1/8
47-3/8X3/16
50-3/16
50-5/16
50-3/8
86A-1/4
86A-3/8
86A-7/16
E307
3/8 x 1/8
1/4 x 3/32
5/16 x 1/8
3/8 x 3/16
1/4 x 1/16
5/16 x 1/8
3/8 x 3/16
1/4 x 1/4
3/8 x 3/8
7/16 x 7/16
Pouch
9.5 x 3.2
6.4 x 2.4
7.9 x 3.2
9.5 x 4.8
6.4 x 1.6
7.9 x 3.2
9.5 x 4.8
6.4 x 6.4
9.5 x 9.5
11.1 x 11.1
in. mm
CHISELS,DRIFTPINSANDPUNCHES
NO.4 5-PIECE SET
CODE SIZE
47-5/16X5/32
50-3/8
41-3/8
86A-7/1686A-1/2
E518
5/16 x 5/32
3/8 x 3/16
3/8 x 1/8
7/16 x 7/161/2 x 1/2
Pouch
7.9 x 4.2
9.5 x 4.8
9.5 x 3.2
11.1 x 11.112.7 x 12.7
in. mm
CHISELS,DRIFTPINSANDPUNCHES
NO.3 5-PIECE SET
CODE SIZE
41-3/8
47-5/16X1/847-3/8X3/16
50-5/16
86A-1/2
E300
3/8 x 1/8
5/16 x 1/83/8 x 3/16
5/16 x 1/8
1/2 x 1/2
Pouch
9.5 x 3.2
7.9 x 3.29.5 x 4.8
7.9 x 3.2
12.7 x 12.7
in. mm
NO.2 NO.4 NO.3
COMBINATION SETS OF
CHISELS, PUNCHES, DRIFT AND PINS
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
495SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
EXTRALONGPINPUNCHES
48A 5-PIECE SET
48-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/16
E517
3/8 x 5/323/8 x 3/167/16 x 7/321/2 x 1/41/2 x 5/16
Pouch
9.5 x 4.09.5 x 4.811.1 x 5.612.7 x 6.412.7 x 7.9
CODE SIZEin. mm
SHORTDRIFTPUNCHES
50A 6-PIECE SET
50-3/1650-1/450-5/1650-3/850-7/1650-1/2E515
1/4 x 1/161/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/4
Pouch
6.4 x 1.66.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.4
CODE SIZEin. mm
50A 48A
LONGDRIFTPUNCHES
96A 7-PIECE SET
96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4
E303
1/4 x 3/325/16 x 1/83/8 x 3/167/16 x 7/321/2 x 1/45/8 x 5/163/4 x 3/8
Pouch
6.4 x 2.47.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.415.9 x 7.919.1 x 9.5
CODE SIZEin. mm
STRAIGHTPINPUNCHES
47A 7-PIECE SET
47-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4
E307
1/4 x 1/161/4 x 3/325/16 x 1/85/16 x 5/323/8 x 3/167/16 x 7/32
1/2 x 1/4
Pouch
6.4 x 1.66.4 x 2.47.9 x 3.27.9 x 4.09.5 x 4.811.1 x 5.612.7 x 6.4
CODE SIZEin. mm
PUNCHES AND DRIFT PINSDriftpinsareusedtoinstallorremoveguidebushings,pins,andcenterguides.Theirlengthisimportantanditdependsonthejob.Straightpinscanalsobeusedtoalignholeswhenassembling parts.
The tool's butt end is designed to withstand strikes.
Made with micro-alloy steel for greater resistance.
Tapered tip, ideal for installing or removing pins and center
guides in deep holes.
Straight tip, ideal for installing or removing guide bushings when
die-cutting.
47A
96A
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
496
STRIKING TOOLS
LONGDRIFTPUNCHES
99B 5-PIECE SET
96-5/1696-3/896-7/1696-1/296-5/8
E517
5/16 x 1/83/8 x 3/167/16 x 7/32
1/2 x 1/45/8 x 5/16
Pouch
7.9 x 3.29.5 x 4.811.1 x 5.612.7 x 6.415.9 x 7.9
CODE SIZEin. mm
99B
STRAIGHTPINPUNCHES
47-1/4X1/1647-1/4X3/3247-5/16X1/847-5/16X5/3247-3/8X3/1647-7/16X7/3247-1/2X1/4
LENGTHL TOTAL
in.1/163/321/85/323/167/321/4
mm1.62.93.24.04.85.66.4
in.4 3/84 3/45 1/45 5/86 1/86 1/26 3/4
mm111.1120.7133.4142.9155.6165.1171.5
gm242840456849127
BCODE
in.1/41/4
5/165/163/8
7/161/2
mm6.46.48.08.09.511.112.7
A
lb.0.050.060.090.100.150.110.28
STANDARDS: FEDERAL GGG-P-831F ASME B107.48M
STRAIGHTPINPUNCHESFACTSHEET
ANSI209.2
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/INCH
STRIKING AREA HARDNESS ORC
IMPACTWEIGHT/LB
47-1/4X1/1647-1/4X 3/3247-5/16X1/847-5/16X5/3247-3/8X 3/1647-7/16X7/3247-1/2X 1/4
53-6053-6053-6053-6053-6053-6053-60
571010203025
45 max.45 max.45 max.45 max.45 max.45 max.45 max.
11
2 1/2”55510
To install or remove guide bushings when die-cutting. To install or remove pins and center guides, and in the alignment of pins that center two or more pieces. The tool's butt end is designed to withstand strikes.
48-3/8 x 3/16
47-1/2 x 1/4
8”EXTRALONGSTRAIGHTPINPUNCHES
48-3/8X5/3248-3/8X3/1648-7/16X7/3248-1/2X1/448-1/2X5/16
LENGTHL TOTAL
A BCODE
in.3/83/87/161/21/2
mm9.59.511.112.712.7
in.5/323/167/321/45/16
mm4.04.85.66.37.9
in.88888
mm203203203203203
gm388357617826830
lb.0.850.781.361.821.83
STANDARDS: FEDERAL GGG-P-831F ASME B107.48M
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
497SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
LONGTAPEREDDRIFTPUNCHES
96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4
LENGTHL TOTAL
CODE B
in.3/321/83/167/321/45/163/4
mm2.23.24.85.66.47.919.0
A
in.1/45/163/87/161/25/83/8
mm6.37.99.511.112.715.89.5
in.10101010101010
mm254.0254.0254.0254.0254.0254.0254.0
gm5280117172224354503
lb.0.110.180.260.380.490.781.11
STANDARDS: FEDERAL GGG-P-831F ASME B107.48M
LONGTAPEREDDRIFTPUNCHESFACTSHEET
ASMEB107.48M
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/INCH
STRIKING AREA HARDNESS ORC
IMPACTWEIGHT/LB
96-1/496-5/1696-3/896-7/1696-1/296-5/896-3/4
53-6053-6053-6053-6053-6053-6053-60
202020SESESESE
45 max.45 max.45 max.45 max.45 max.45 max.45 max.
51010SESESESE
SHORTTAPEREDDRIFTPUNCHESFACTSHEET
ASMEB107.48M
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/INCH
STRIKING AREA HARDNESS ORC
IMPACTWEIGHT/LB
50-3/1650-1/450-5/1650-3/850-7/1650-1/2
53-6053-6053-6053-6053-6053-60
20202020SESE
45 max.45 max.45 max.45 max.45 max.45 max.
551010SESE
To install or remove guide bushings when die-cutting. To install or remove pins and center guides in deep holes, and in the alignment of pins that center two or more pieces.The tool's butt end is designed to with stand strikes.
SHORTTAPEREDDRIFTPUNCHES
50-3/1650-1/450-5/1650-3/850-7/1650-1/2
LENGTHL TOTAL
BACODE
in.1/163/321/83/167/321/4
mm1.62.43.24.85.66.4
in.1/41/4
5/163/8
7/161/2
mm6.46.48.09.511.112.7
in.4 1/84 5/85 1/85 5/8
66 1/2
mm104.7117.4130.1142.8152.4165.1
gm21244275112153
lb.0.050.050.090.170.250.34
STANDARDS: FEDERAL GGG-P-831F ASME B107.48M
50-5/16 96-1/2
PUNCHES AND DRIFT PINS
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
498
STRIKING TOOLS
CENTER AND PRICK PUNCHES50°centerpunchesareusedtomarkpiecesinmanufacturingorassembly.90°prickpunchesareusedtocentertheborepointandpreventtips from slipping off.
PRICKANDDRILLPUNCHES
41A 5-PIECE SET
41-1/441-5/1641-3/841-1/241-5/8
E518
1/4 x 5/645/16 x 3/323/8 x 1/81/2 x 3/165/8 x 5/16
Pouch
6.4 x 2.07.9 x 2.49.5 x 3.212.7 x 4.815.9 x 7.9
CODE SIZEin. mm
STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M
50˚PRICKPUNCHES
LENGTHL TOTAL
44-1/444-5/1644-3/844-7/1644-1/244-5/8
CODE B
in.3/327/643/8
7/32"1/4"3/8"
mm2.32.79.55.56.49.5
A
in.1/45/163/8
7/16"1/2"5/8"
mm6.47.99.511.112.715.8
in.4 3/4
55 1/45 5/8"
6"6 7/8"
mm120.6127.0133.3142.8152.4174.6
gm25457095196400
lb.0.060.100.150.200.430.88
500
For tracing on metal plates or sheet metal; to mark or punch guide holes; to place self-threading screws.
CENTERPUNCHESFACTSHEET
ANSI209.1
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/IN.
STRIKING AREA HARDNESS ORC
IMPACTWEIGHT/LB
41-1/441-5/1641-3/841-7/1641-1/241-5/8
48-6048-6048-6048-6048-6048-60
151515151515
95 max.95 max.95 max.95 max.95 max.95 max.
555555
Useful for initiating holes. The tool's butt end is designed to withstand strikes.
PRICKPUNCHESFACTSHEET
ANSI209.1
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/IN.
STRIKING AREA HARDNESS ORC
IMPACTWEIGHT/LB
44-1/444-5/1644-3/844-7/1644-1/244-5/8
48-6048-6048-6048-6048-6048-60
151515151515
95 max.95 max.95 max.95 max.95 max.95 max.
555555
41A
41 - 1/2 44 - 3/8
The tool's butt end is designed to withstand
strikes.
FOR CENTERINGOR MARKING
900
500FOR PRICKINGOR DRILLING
STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M
90˚CENTERPUNCHES
LENGTHL TOTAL
41-1/441-5/1641-3/841-7/1641-1/241-5/8
in.4 1/44 5/84 7/85 1/45 5/86 1/4
mm107.9117.4123.8133.3142.8158.7
gm24396287163222
CODE
in.5/643/321/85/323/165/8
mm2.02.43.24.04.815.8
B
in.1/45/163/87/161/25/16
mm6.47.99.511.112.77.9
A
lb.0.050.090.140.190.360.49
900
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
499SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
STRIKING TOOLS
Designedtoremove,cutorbreakmaterialswithahardnesssofterthanthechisel's,suchasconcrete,rock,slag,brass,untreatedsteel,nuts,bolts,pins,etc.Itiswidelyusedintheconstructionindustry,aswellasintheinstallationandmaintenanceoffixedequipmentandpipinginthechemicalandfoodindustries.Thetip'swidthdictatesthechisel'suses,dependingontheaccuracyorbruteforcerequired.
CHISELS
The tool's butt end is designed to withstand
strikes.
Made with micro-alloy steel for greater resistance.
Designed to remove cold materials like iron, brass, bronze and steel.
Tip wider than body
CHISELSET
86D 10-PIECE SET
86A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-7/8X886A-1X8
E513
1/4 x 3/161/4 x 1/4
5/16 x 5/163/8 x 3/8
7/16 x 7/161/2 x 1/25/8 x 5/83/4 x 3/47/8 x 1
1 x 1 3/16
Pouch
6.4 x 4.86.4 x 6.47.9 x 7.99.5 x 9.5
11.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.122.2 x 25.425.4 x 30.2
CODE SIZEin. mm
CHISELSET
86B 7-PIECE SET
86A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X8
E303
1/4 x 1/45/16 x 5/16
3/8 x 3/87/16 x 7/16
1/2 x 1/25/8 x 5/83/4 x 3/4
Pouch
6.4 x 6.47.9 x 7.99.5 x 9.5
11.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.1
CODE SIZEin. mm
CHISELSET
86A 5-PIECE SET
86A-5/1686A-7/1686A-1/286A-5/886A-3/4X8
E520
5/16 x 5/167/16 x 7/161/2 x 1/25/8 x 5/83/4 x 3/4"
Pouch
7.9 x 7.911.1 x 11.112.7 x 12.715.9 x 15.919.1 x 19.1
CODE SIZEin. mm
86D
86B 86C 86A
CHISELSET
86C 5-PIECE SET
86A-1/486A-5/1686A-3/886A-7/1686A-1/2
E520
1/4 x 1/45/16 x 5/163/8 x 3/8
7/16 x 7/161/2 x 1/2
Pouch
6.4 x 6.47.9 x 7.99.5 x 9.5
11.1 x 11.112.7 x 12.7
CODE SIZEin. mm
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
500
STRIKING TOOLS
CHISELS
86A-1/2 76-3/8 72-3/8
STANDARDS: FEDERAL GGG-P-831F, ASME B107.48M
COLDCUTCHISELS
LENGTHL
TOTAL
86A-3/1686A-1/486A-5/1686A-3/886A-7/1686A-1/286A-5/886A-3/4X886A-3/4X1286A-7/8X886A-7/8X1286A-1X886A-1X12
TIP SIZE
A
BODY SIZE
B
CODE
in.1/45/163/87/161/25/83/47/87/811
1 3/16 1
mm6.47.99.511.112.715.919.022.222.225.425.430.2 25.4
in.3/161/45/163/87/161/25/83/43/47/87/811
mm4,86.47.99.511.112.715.919.019.020.620.625.425.4
in.4 7/85 1/85 3/85 1/2
66 5/8
7812812
8 1/4 12
mm123.8130.2136.5139.7152.4168.3177.8203.2304.8203.2304.8209.5 304.8
gm17325178114165270469695500773670 1085
lb.0.040.070.110.170.250.360.601.031.531.101.701.48 2.39
STANDARDS: FEDERAL GGG-P-831C, ASME B107.48M
DIAMONDTIPCHISELS
LENGTHL
TOTAL
76-1/476-5/1676-3/876-1/276-5/8
TIP SIZE
A
BODY SIZE
B
CODE
in.5/323/161/45/165/8
mm4.04.86.47.915.9
in.1/45/163/81/23/8
mm6.47.99.512.79.5
in.4 1/2
55 5/8
6 6 1/2
mm114.3127.0142.9152.4165.1
gm345996183309
lb.0.070.130.210.400.68
COLDCUTCHISELSFACTSHEET
ASMEB107.47M
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/INCH
STRIKING AREA HARDNESS ORC
86A-3/1686A-1/4
86A-5/1686A-3/8
86A-7/1686A-1/286A-5/8
86A-3/4X886A-3/4X1286A-7/8X8
86A-7/8X1286A-1X8
86A-1X12
45-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-6045-60
66620202030303030303030
45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.45 max.
DIAMONDTIPCHISELFACTSHEET
ASMEB107.47M
CODE CUT AREA HARDNESS ORC
IMPACTHEIGHT/INCH
STRIKING AREA HARDNESS ORC
76A-1/476A-5/1676A-3/876A-1/276A-5/8
53-6053-6053-6053-60 53-60
6662020
45 max.45 max.45 max.45 max.45 max.
Designed to make V-shaped cuts and to clean interior corners.
For removing, cutting or breaking materials with a hardness lower than the chisel's. Designed to remove cold materials like iron, brass, bronze and steel. The tool's butt end is designed to withstand strikes.
Designed for cutting plumbing and make slits on metals.
CAPECHISELS
LENGTHL
TOTAL
TIP SIZE
A
BODY SIZE
B
CODE
72-1/472-5/1672-3/8
in.11/6413/641/4
mm4.45.26.4
in.1/45/163/8
mm6.47.99.5
in.4 5/85 1/85 1/2
mm117.5130.2139.7
gm284668
lb.0.060.100.15
STANDARD: FEDERAL GGG-C-313C
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
501SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
PUNCH AND CHISEL HOLDERS Reducestheriskofhandinjury.Idealforholdingpunchesandchiselsupto1inchindiameter.
PUNCHANDCHISELHOLDER
2108
2108
CODE
gm275
lb.0.605
SHAFT DIAMETER
mm9.5
in.3/8
TOTAL LENGTH
mm215.9
in.8 1/2
SQUAREPUNCHANDCHISELHOLDER
2108A
2108A
CODE
gm275
lb.0.605
SHAFT DIAMETER
mm9.5
in.3/8
TOTAL LENGTH
mm215.9
in.8 1/2
High-resistance ergonomic plastic
handle.
Chrome-vanadium steel
shaft.
Blued coating.
Up to 1" holding
capacity.
STRIKING TOOLS
2108
Up to 1" holding
capacity.
2108A
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
502
SPRING-LOADED PUNCH SETApplyupto3,500PSIforce.Theusercaneasilycontroltheamountofforceappliedbyadjustingthespring'stension.Thishighlyaccuratetooloffersgreatcontrol.Idealforworkintightareasoronjobsrequiringgreatprecision.
SPRING-LOADEDLETTERAND NUMBERPUNCHSET
42AZ09 37-PIECE SET
DESCRIPTION
TOTAL
26 Letters, A to Z10 numbers, 0 to 9Spring-loaded punchPlastic case
gm480
lb.1.06
42AZ09
STRIKING TOOLS
LEADERSHIPINDISPUTABLE QUALITY
The quality of URREA tools exceeds
international manufacturing
standards (ISO, ANSI, ASME, SAE,
GSA, DIN, DGN, EMA, ANCE, VDE).
When buying a URREA tool you are
purchasing from the best tools in
the world.
www.urreaprofessionaltools.com
(800) 366-6911
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS CHISELS, PUNCHES
& DRIFT PINS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
503SUPERIOR QUALITY AFFORDABLE TOOLS
TOOLSSTRIKING
10
ALIGNMENT BARS Thereisagreatvarietyofalignmentbarsfordifferentpurposes.Theycanbeusedtoalign,adjust,moveordisassemblemetalorwood
pieces.
Great tool for creating leverage, for aligning or for positioning mechanical parts or pipe flanges.
STRIKING TOOLS
2125
The angled chisel tip allows greater leverage when used to remove wooden seals or machinery
elements.
The flat tip is used mainly for aligning.
Useful for prying
HEADALIGNMENTPRYBARSWITH TURNINGHEAD
21262130
CODE LENGTHL TOTAL
in.1/25/8
in.16 1/2
18
gm419702
DISTANCE BETWEEN HEXAGON PLANES
B
lb.0.921.55
L
B
mm12.715.9
mm419.1457.2
ALIGNMENTBARS
2116212021242125
CODE LENGTHL
TOTAL
DISTANCE BETWEEN HEXAGON PLANES
B
in.1/25/83/47/8
mm12.715.919.022.2
in.12 13/16
1623 3/4
30
mm325.4406.4603.2762.0
gm32455010132267
lb.0.711.212.235.00
L
B
2130
2126
2120
2116
21003 3-PIECE SET
ALIGNMENTBARS
211621202126
CODE LENGTHL
DISTANCE BETWEEN HEXAGON PLANES
B
in.1/25/81/2
mm12.715.912.7
in.12 13/16
1616
mm325.4406.4406.4
L
B
HAMMERS DEAD BLOW HAMMERS
HOLE PUNCH SETS
CHISELS, PUNCHES & DRIFT PINS
ALIGNMENT BARS
BALL PEIN HAMMERS
RUBBER MALLETS AND PLASTIC FACE HAMMERS ALIGNMENT
BARS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Top Related