Download - Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Transcript
Page 1: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 2: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page1/120

Table of ContentsINDEX…………………………………………………………………………………………………………...3HOSE SELECTION............................................................................................................................. 5

HOSE CONSTRUCTION..................................................................................................................... 6

Properties of Basic Rubber Compounds ........................................................................................ 7Chemical Resistance Chart .............................................................................................................. 8

I. DUCTING HOSE ............................................................................................................ 241.1. Highly abrasion-proof hoses up to 150°C.............................................................................. 241.2. PVC, EVA and PE suction and transport hoses.................................................................... 281.3. SUCTION AND DISCHARGE HOSES.................................................................................. 291.4. AIR CONDITIONING AND VENTILATION HOSES .............................................................. 311.5. COMPRESSED AIR AND PNEUMATIC HOSES, PROFILES.............................................. 311.6. FLAME RETARDANT PU HOSES FOR TIMBER INDUSTRY ............................................. 321.7. ELECTRICALLY CONDUCTUCTIVE, ANTISTATIC HOSES............................................... 331.8. SPECIAL HOSES FOR THE FOOD INDUSTRY .................................................................. 341.9. METAL HOSES ..................................................................................................................... 351.10. EXHAUST GAS HOSES........................................................................................................ 361.11. HOT AIR HOSES, HIGH-TEMPERATURE HOSES (-200 .. +1000°C) ................................ 361.12. SWEEPER TRUCK HOSES.................................................................................................. 38

II. Fire Extinguisher Hose ............................................................................................... 392.1. General Purpose.................................................................................................................... 392.2. According to Norms ............................................................................................................... 39

III. AIR HOSE...................................................................................................................... 413.1. Compressed Air ..................................................................................................................... 413.2. Compressed Air according to Norms..................................................................................... 443.3. Compressed Air for Service Stations..................................................................................... 443.4. Compressed Air for Concrete Vibrator .................................................................................. 453.5. Compressed Air Insulating..................................................................................................... 453.6. Hot Compressed Air .............................................................................................................. 463.7. Breathing................................................................................................................................ 46

IV. Water Hose.................................................................................................................... 474.1. Delivery Hose ........................................................................................................................ 474.2. Suction and Delivery.............................................................................................................. 504.3. Industrial Cooling ................................................................................................................... 514.4. Tanker.................................................................................................................................... 524.5. Snow...................................................................................................................................... 524.6. PVC Low Temperature .......................................................................................................... 52

V. Hot Water and Steam Hose ......................................................................................... 535.1. Cooling System...................................................................................................................... 535.2. Hot Water............................................................................................................................... 545.3. Steam..................................................................................................................................... 55

VI. GAS HOSE .................................................................................................................... 576.1. Welding Gas .......................................................................................................................... 576.2. Domestic Gas ........................................................................................................................ 586.3. Industrial Gas......................................................................................................................... 59

VII. Beverage and Food Hose ........................................................................................... 607.1. General Purpose.................................................................................................................... 607.2. Milk Tanker ............................................................................................................................ 647.3. Bulk Material .......................................................................................................................... 657.4. Fish Pump.............................................................................................................................. 65

Page 3: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page2/120

VIII. ACID AND CHEMICAL HOSES .................................................................................... 668.1. General Purpose.................................................................................................................... 668.2. According to Norms ...............................................................................................................678.3. FEP Lining Hose .................................................................................................................... 688.4. Composite Hoses................................................................................................................... 708.5. Chemical Bunkering...............................................................................................................72

IX. Agricultural spray hoses.............................................................................................. 739.1. Black Rubber Hose ................................................................................................................739.2. PVC Hose .............................................................................................................................. 73

X. Oil and Fuel Hoses .......................................................................................................7410.1. General Purpose.................................................................................................................... 7410.2. Low temperature Applications................................................................................................ 7610.3. Petrol Pumps.......................................................................................................................... 7610.4. Tank Truck ............................................................................................................................. 7810.5. LG ........................................................................................................................................8010.6. Aircraft Groung Refueling ......................................................................................................8110.7. Bitumen ..................................................................................................................................8310.8. Bunkering hose ...................................................................................................................... 8410.9. Composite hose ..................................................................................................................... 86

XI. Automotive and Boat Hoses........................................................................................ 8711.1. Automotive Cooling System...................................................................................................8711.2. Automotive Air Brake System ................................................................................................ 8711.3. Automotive Fuel Supply .........................................................................................................8811.4. Boat Fuel Supply.................................................................................................................... 9011.5. Boat Exhaust Gas and Refuelling.......................................................................................... 9111.6. Boat Sanitary.......................................................................................................................... 92

XII. MATERIAL HANDLING HOSE...................................................................................... 9312.1. Sandblast ............................................................................................................................... 9312.2. Cement...................................................................................................................................9312.3. Mortar.....................................................................................................................................9412.4. Concrete.................................................................................................................................9512.5. General Purpose.................................................................................................................... 9512.6. Special Heavy Duty................................................................................................................97

XIII. Cable Protection Hose .................................................................................................9813.1. Protection and Cooling...........................................................................................................9813.2. Protection ............................................................................................................................... 99

XIV. Multipurpose Hose .....................................................................................................10014.1. EPDM Tube..........................................................................................................................10014.2. NBR ...............................................................................................................................103

XV. Stainless Steel Hose...................................................................................................10415.1. Low Pressure .......................................................................................................................10415.2. Meduim Pressure.................................................................................................................10415.3. High Pressure ......................................................................................................................10515.4. Fittings..................................................................................................................................105

XVI. Peristaltic Pump Hoses ..............................................................................................106

XVII. CRIOGENIC HOSE ......................................................................................................107

XVIII. PTFE HOSE..................................................................................................................10818.1. CORRUGATED PTFE Hose................................................................................................ 10918.2. Smothbore PTFE Hose........................................................................................................11218.3. Pharmacephtical Hose.........................................................................................................118

XIX. Other from OPW MARKET.................................................................................................120

Page 4: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page3/120

INDEXCasesAIR ISO 2398 N-T (Type 1B - 2B - 3B).................................... 44AIR NFT 47252/A..................................................................... 44AIR SP 318 N/L 15 - NY/L 15 .................................................. 43AIRBRAKE DIN 74310............................................................. 87AIRBRAKE SAE J 1402-A ....................................................... 88AIRDUC® HT-PUR 351............................................................ 26AIRDUC® HT-PUR 355 ............................................................ 26AIRDUC® HT-PUR 356............................................................ 27AIRDUC® PE 362 EC............................................................... 34AIRDUC® PE 362 F ................................................................. 34AIRDUC® PUR 350 MHF ......................................................... 25AIRDUC® PUR 351 MHF ......................................................... 26AIRDUC® PUR 355 .................................................................. 26AIRDUC® PUR 355 CSH.......................................................... 27AIRDUC® PUR 355 CSH ORANGE......................................... 27AIRDUC® PUR 355 CSH REINFORCED................................. 27AIRDUC® PUR 355 REINFORCED ......................................... 26AIRDUC® PUR 356 .................................................................. 26AIRDUC® PUR 356 MHF REINFORCED................................ 27AIRDUC® PUR 357 .................................................................. 27AIRDUC® PVC 341 .................................................................. 29AIRDUC® PVC 345 .................................................................. 29AIRDUC® TPE 363 .................................................................. 36AIRSTATION 2000 NB/L ......................................................... 44AIRTEMP 220 .......................................................................... 46ALIREX .................................................................................... 62APERFLAT LY ......................................................................... 49APERFLAT MB ........................................................................ 50APERFRUT 20 - 40 - 80 .......................................................... 73APERSPIR............................................................................... 63APERSPIR PU......................................................................... 96AQUAPRESS 15...................................................................... 49ARTIREX.................................................................................. 52ASPIREX.................................................................................. 28ASPIREX PU/ANC................................................................... 24ASPIREX PU/R........................................................................ 24AUTOGAS ECE 67/110 CLASS 2 ........................................... 89AUTOGENE EN 559 NR/ - NB/L 20 ........................................ 57BARDUC PUR-INOX 382 MHF ............................................... 34BARDUC PUR-INOX 382 MHF-AS ......................................... 33BARDUC® PVC 381................................................................. 30BETON 80................................................................................ 95BEVERA 10 ............................................................................. 50BIOFLEX................................................................................ 112BIPRESS EN 559 B-R/L 20 ..................................................... 57BUNKER SBL .......................................................................... 84BUNKER SBS.......................................................................... 84CABLE 109 .............................................................................. 99CABLE SN 10 .......................................................................... 98CABLEPRESS B/L 10.............................................................. 98CABLEPRESS B/L 20.............................................................. 98CARBO G NW/L 10 - NB/R 10 ................................................ 58CARBOBLUE N/L 10 – 20 ....................................................... 67CARBOCORD 10 - 15 ............................................................. 74CARBOCORD 18 TÜV ............................................................ 78CARBOCORD EN 12115......................................................... 78CARBOCORD EN ISO 7840 A1.............................................. 90CARBOCORD F 10 ................................................................. 76CARBOPRESS EN ISO 7840 A1 ............................................ 90CARBOPRESS SAE J 200 N/L ............................................... 88CARBOPRESS SAE J 30 R7 N/L............................................ 88CARBOPRESS® D ARTIC N/L ................................................ 77CARBOPRESS® D EN 1360/1 N/L.......................................... 76CARBOPRESS® D EN 1360/3................................................. 77CARBOPRESS® D RV............................................................. 77CARBOPRESS® N/L 10 - 20 ................................................... 74CARBUREX ............................................................................. 80CARBUREX/ANC .................................................................... 80CARBURITE 10 ....................................................................... 75CARBURITE 16 ....................................................................... 75CARBURITE 16 TÜV............................................................... 75CARBURITE BS 3492-D.......................................................... 78

CARBURITE EN ISO 7840 A1 .................................................91CARBURITE F 10.....................................................................76CEMENT 713 10.......................................................................94CEMENT SM 10 .......................................................................93CERGOM 10.............................................................................97CHEMIOEL 10 EN 12115 OND................................................79CHEMIOEL EN 12115 ..............................................................79COOLONG HOSE ....................................................................35CORROFLON.........................................................................109CP ARAMID 461.......................................................................37CP ARAMID 461 PROTECT.....................................................36CP HiTex 480............................................................................38CP HiTex 481............................................................................38CP HiTex 483............................................................................38CP HYP 450..............................................................................37CP HYP 450 PROTECT ...........................................................36CP PE 457 ................................................................................31CP PTFE/GLASS-INOX 471.....................................................37CP PTFE-INOX 475 CE............................................................34CP PTFE-INOX 475 F ..............................................................35CP PUR 455 MHF.....................................................................25CP SIL 460................................................................................37CRIOGEN ...............................................................................107DIVER-100 EN 250 N/L ............................................................46DRINKPRESS WB/L 10............................................................61ELAFLON EF D ........................................................................69ELAFLON EF SD......................................................................69ELAFLON PLUS FEP D ...........................................................69ELAFLON PLUS FEP SD.........................................................69ENOREX N.A. (no abrasion) ....................................................63ENOREX PLUS ........................................................................63ENOTRIA® 10 ...........................................................................62EVA 373....................................................................................29FALERNO® 10 ..........................................................................62FHD...........................................................................................85FIRECORD 40 BS 3169 A2......................................................40FIREPRESS 40 EN 3 ...............................................................40FIREPRESS BS 3169 A1 NR/L................................................39FIREPRESS DIN 14818 N/L.....................................................40FIREPRESS EN 694 N/L..........................................................39FIREPRESS N/L - NR/L 20 ....................................................101FIREPRESS N/L – NR/L 20......................................................39FLEXIREX.................................................................................28FLEXIREX/N.............................................................................90FORTIREX PU/ANC .................................................................96FRUTPRESS N/L 50 - 80 - 100................................................73FUCINO 10 ...............................................................................47FUCINO 20 ...............................................................................47GAMBRINUS SM WB 10..........................................................60GAMBRINUS UPE WB SM EN 12115 .....................................61GAMBRINUS WB 10 ................................................................60GASINOX /B0 .........................................................................104GASINOX /B0 /S.....................................................................104GASINOX /B1 .........................................................................104GASINOX /B1 /S.....................................................................105GASINOX /B2 .........................................................................105GASINOX /B2 /S.....................................................................105GASSOFLEX AAE 10...............................................................86GASSOFLEX AAE 14...............................................................86GASSOFLEX EGE 10 ..............................................................70GASSOFLEX EGE 14 ..............................................................70GASSOFLEX GGE 10 ..............................................................86GASSOFLEX GGE 14 ..............................................................86GASSOFLEX GGE 7 ................................................................86GASSOFLEX MARINA 14 ........................................................72GASSOFLEX SGE 10 ..............................................................71GASSOFLEX SGE 14 ..............................................................71GASSOFLEX SGT 10...............................................................71GASSOFLEX SGT 14...............................................................71GASSOFLEX SSE 10...............................................................70GASSOFLEX SSE 14...............................................................70GASSOFLEX SST 10 ...............................................................71GASTRUCK EN 1762 D-M.......................................................80HDC ..........................................................................................82HOTBITUM 10 ..........................................................................83

Page 5: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page4/120

HYPERLINE FX ..................................................................... 116HYPERLINE SB..................................................................... 115HYPERLINE V ....................................................................... 111IDRO 10 ................................................................................... 48INERPRESS EN 559 N/L 20.................................................... 59INGLAS 30 ............................................................................... 51INTONACATRICI 12 ................................................................ 94INTONACATRICI 25 ................................................................ 95INTONACATRICI 40 ................................................................ 95ISOLPRESS B/L 20 ................................................................. 45ISOLPRESS HT N/L 20 ........................................................... 45ITTIREX ................................................................................... 65JETCORD B EN 1361.............................................................. 81JETCORD C EN 1361 ............................................................. 81JETCORD E EN 1361.............................................................. 82JETCORD F EN 1361.............................................................. 82JETCORD XT/C....................................................................... 82JUMBO N/L ............................................................................ 102LAVAPRESS KTW N/L 20 ....................................................... 55LAVAPRESS NG/L 30 ............................................................. 55LIBECCIO EN ISO 3861 .......................................................... 93LPG .......................................................................................... 81MASKPRESS EN 14594.......................................................... 46MEDIREX PU........................................................................... 96MEDIREX SE........................................................................... 51METAL HOSE 375................................................................... 35METAL HOSE 377 REINFORCED.......................................... 35METAL HOSE HT 375 ............................................................. 35METAL HOSE INOX 376 ......................................................... 35MILK SM 46 WB 6.................................................................... 64MINIERA 10 ............................................................................. 42MINIERA 15 ............................................................................. 42MINIERA 20 ............................................................................. 42MINIERA 25 ............................................................................. 42MINIERA 40 ............................................................................. 43MULTIGASPRESS EN 559 NRA/L 20..................................... 59MULTIREX............................................................................... 51MULTIREX PU/ANC ................................................................ 95NEO 1 ...................................................................................... 36NEO 2 ...................................................................................... 37NEVE 50 .................................................................................. 52NORFLEX PTFE 407............................................................... 32NORFLEX SIL 408................................................................... 32NORFLEX® PUR 401 MHF...................................................... 31NORFLEX® PUR 441 MHF...................................................... 32NORFLEX® PVC 400............................................................... 32NORFLEX® PVC 440............................................................... 32NORPLAST® PUR 385............................................................. 29NORPLAST® PUR 387............................................................. 31NORPLAST® PUR-CU 386 ...................................................... 29NORPLAST® PVC 379 GREEN SUPERELASTIC.................. 30NORPLAST® PVC 380 GREEN............................................... 30NORPLAST® PVC 383............................................................. 30NORPLAST® PVC 384............................................................. 30NORPLAST® PVC 388 SUPERELASTIC................................ 30NORPLAST® PVC 389 SUPERELASTIC................................ 31OILCORD 30.......................................................................... 103OILPLUS 30 ........................................................................... 103OILPRESS N/L 20 ................................................................. 103OILPRESS N/L 30 ................................................................. 103PERISTALT............................................................................ 106PHARMAFLEX....................................................................... 118PHARMALINE........................................................................ 119PHDF ....................................................................................... 83POLIAX® D 10.......................................................................... 66POLIAX® D EN 12115.............................................................. 67POLIAX® D SM EN 12115 ....................................................... 67POLIAX® UPE CON SM EN 12115 ......................................... 68POLIAX® UPE SM EN 12115 .................................................. 68PRESCORD N/R 10 ................................................................ 47

PRESCORD N/R 20 ................................................................ 41PRESCORD N/R 6 .................................................................. 47PRESS® N/L - NY/L 20 ........................................................... 41PRESS® N/L 10........................................................................ 48PRESS® N/R 10 ....................................................................... 41PRESS® NR/L 12..................................................................... 48PROPANDIN NA/L 6 - 30 ........................................................ 58PROTAPE® PUR 327 MEMORY ............................................. 25PROTAPE® PUR 330 MHF...................................................... 25PROTAPE® PUR 335 MHF FLAT ............................................ 25PROTAPE® PUR 370 .............................................................. 31PROTAPE® PUR-CU 335 MHF FLAT ..................................... 25PROTAPE® PUR-INOX 330 MHF............................................ 34PROTAPE® PUR-INOX 330 MHF-AS ..................................... 33PROTAPE® PVC 310............................................................... 28PROTAPE® PVC 371............................................................... 31PROTAPE® TPE 320 ............................................................... 36PROTAPE® TPE 326 MEMORY.............................................. 36PYTHON NV 20 ..................................................................... 100PYTHON NY 30 ..................................................................... 100RADIOR 10 .............................................................................. 87RADIOR 3 ................................................................................ 87RADIOR DIN 6......................................................................... 53RADIOR K 1003....................................................................... 54RADIOR® 3 (coils).................................................................... 53RAGUSA 4............................................................................... 79RESILO 5 ................................................................................. 65RESILO SM 5 .......................................................................... 65ROBOT .................................................................................... 98ROBUR GPL............................................................................ 81SAFETYPRESS® 15-25........................................................... 58SALDATRICI 10....................................................................... 99SALDATRICI 5......................................................................... 99SIL1.......................................................................................... 37SIL2.......................................................................................... 38SM / TR 311............................................................................. 91SM / TR 311 OND.................................................................... 92SMOOTHBORE ..................................................................... 117SOLVENT TRIX 500 ................................................................ 70STATIONPRESS N/L 20.......................................................... 44STREETCLEANER.................................................................. 38STW ......................................................................................... 85SuperFlex PVC 372 ................................................................. 29TANK CLEANER ..................................................................... 52TBE .......................................................................................... 89TBSE........................................................................................ 89TG 100 ..................................................................................... 89THERMOPRESS 10 ................................................................ 54TIMBERDUC® PUR 531 SE .................................................... 32TIMBERDUC® PUR 532 SE .................................................... 33TIMBERDUC® PUR 533 SE .................................................... 33TIMBERDUC® PUR 534 SE .................................................... 33TRT 204 WW 10 ...................................................................... 55TWE ......................................................................................... 83VAPORE 164 EN ISO 6134 Type 1/A ..................................... 56VARIO 10............................................................................... 101VARIO NW 3............................................................................ 92VARIO SN 10......................................................................... 102VARIOCORD 20 .................................................................... 101VARIOPRESS N/L 10 ............................................................ 101VARIOPRESS N/L 20 ............................................................ 101VIBRACORD 10....................................................................... 45VIBRAPRESS N/R 10.............................................................. 45VIGOR 1 EN ISO 6134 Type 2/A............................................. 56VIGOR 2 EN ISO 6134 Type 2/A............................................. 56VINITRESS .............................................................................. 64WASSERPRESS 20 .............................................................. 102WATER NR 10......................................................................... 49ZEMENT D............................................................................... 94

Page 6: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page5/120

HOSE SELECTIONIn order to select correct hose that meets the application requirements it is necessary to give as much

operating information as possible. Below is listed the necessary information to help you select the proper hose.

1 - SIZE1a – inside diameter1b – outside diameter1c – length with or without fittings1d - tolerances (according or not to norms)

2 - DUTY2a – type of fluid or material

2a. 1 – chemical identification2a. 2 - concentration2a. 3 – room temperature (minimum and maximum)2a. 4 – for solid materials: description and dimension

2b - working, test, bursting pressure2c – requested suction or vacuum2d – fluid conveyance speed2e - flow: quantity, time

3 - APPLICATION3a - non-continuous duty3b – inside or external application3c – ease of rotation and movement3d - flexibility, minimum bend radius3e - environment conditions (cover resistance)

3e. 1 - abrasion3e. 2 – petroleum based fluids (specify the name)3e. 3 - solvents (specify the name)3e. 4 - acids (specify the name and concentration)3e. 5 – temperature range: room, min and max temperature3e. 6 – ozone resistance

4 – Hoses without fittings4a – manufacturing or project length

5 – Hoses with fittings5a – fitting type

5a. 1 - dimension5a. 2 – thread type5a. 3 – male or female5a. 4 - reusable5a. 5 - one-time fitting5a. 6 – fitting material

5b – factory coupled assembly5c – applied by the customer

6 – PARTICULAR REQUIREMENTSe.g.: - conductivity

- flame resistance - low temperature resistance

7 – INSPECTION AND TESTING8 - NORMS, SPECIFICATIONS, LEGISLATION ETC.

Page 7: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page6/120

HOSE CONSTRUCTION

RUBBUR HOSE CONSTRUCTIONTUBEIt is the innermost rubber or plastic element of the hose. Must be resistant to the materials it is intended to convey. The characteristics of the rubber or plastic compound and the thickness of the tube depend on the service in which the hosewill be used.

REINFORCEMENTCan be textile, plastic or metal, alone or in combination, built into the body of the hose to withstand internal pressures, external forces or combination of both.

COVERIt is the outer element and can be made of rubber, plastic or textile materials. The function of the cover is to protect the hose from damage and environment.

PVC-PU CONSTRUCTIONFlexible hose having a rigid PVC spiral or asteel wire reinforcement spiral embedded in a PVC wall.

METALLIC HOSE CONTRUCTIONAnnular stainless steel flexible hose, narrow pitch coveredwith one or two braids in stainless steel.

COMPOSITE HOSE CONTRUCTIONInternal wire spiral supports the hose wall and provides resistance to vacuum for suction applications

External wire spiral armours the hose against abrasion and impact damage and binds the layers of fabrics and films tightly together

Fabric layers act as strength members against internal pressure It IS also a common feature of many composite hoses to have as the external layer PVC coated fabric This provides an easily cleanable color coded surface and gives additional abrasion resistance

Film layers act as a sealing medium to ensure that no product escapes from the hose Films and fabrics can be polypropylene, polyamide, PTFE, polyester polyaramid or glass By combining these alternative components in various ways it is possible to produce hoses with a tremendous range of chemical resistance, working temperatures and pressures

Page 8: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page7/120

Properties of Basic Rubber CompoundsThis table provides some information on the general properties of the most common rubber compounds.Most compounds used in the manufacture of rubber hose are made of different basic rubbers,each

contributing to the physical properties of the finished product.ASTMD 1418 Chemical name Properties

CR ChloropreneExcellent weathering and ozone resistance, flame retarding, abrasion resistance. Good resistance tocompressed air and to oil.

CSM Chloro-sulfonyl-polyethyleneExcellent resistance to ozone, weathering and acid, particularly of the coloured compounds. Resistant topetroleum based fluids.

EPDM Terpolymer of ethylene-propylene-diene

Good resistance to heat, ageing and abrasion. Poor resistance to petroleum based fluids.

EPM Copolymers of ethylene and propylene

Excellent resistance to heat, ageing, abrasion and ozone. Good resistance to many chemicals; poor resistance toaromatics.

FKM / PTFE / FEP / Teflon

Fluorine rubber Excellent resistance to a wide range of chemicals and to heat. Poor physical properties.

IIR Isobutene-isoprene Good resistance to chemicals, such as alcohols, ketones and esters.

NBR Acrylonitrile-butadiene Excellent oil resistance good aromatics and solvents resistance.

NR Natural rubberGood physical properties including abrasion and low temperature resistance. Poor resistance to petroleumbased fluids.

SBR Styrene-butadiene Good physical properties with resistance to heat and abrasion. Poor resistance to petroleum based fluids.

NBR/PVC Acrylonitrile-butadiene-vynil-chloride

Good resistance to oil and aromatics. Recommended as hose cover, when a good weathering, ozone and abrasionresistance is required.

UHMWPE Ultra high molecular weight polyethylene

Excellent abrasion resistance and very low coefficient of friction. Excellent resistance to chemicals, oil and aromatic fuels. Biologically inert and suitable for foodstuffs delivery.

Page 9: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Trade ASTMName Description Codes

Butyl Isobutylene-Isoprene IIRCPE Chlorinated Polyethylene CMEPDM Ethylene

Propylene-Diene EPDM

Hypalon ChlorosulfonatedPolyethylene CSM

Hytrel Thermoplastic Polyester —

Natural Natural Rubber NRNeoprene Polychloropren CRNitrile Acrylonitrile NBR

Nylon Nylon Polymer —SBR Styrene-Butadiene SBRSantoprene Ethylene-

Propylene-Diene EPDM

Teflon Fluorocarbon Resin TFEUHMW Ultra-High Molecular

Weight Polyethylene —Urethane Urethane AU

Viton Floroelastomer FKMXLPE Cross-Linked

Polyethylene XPE

KEYE = ExcellentG = GoodC = ConditionalX = Unsatisfactory

The following table is essentially based upon the mostupdated technical data available, on information fromraw material suppliers, as well as some InternationalStandards, e.g. ISO TR 7620, EN 12115, and otherpublications.Due to the big variety and amount of different chemicalproducts, the given ratings are only partly basedon our own tests. Consequently, the chart is givenas a guidance only, and it cannot be assumed as aguarantee, expressed or implied, for the suitabilityof a product for a specific application. This is due tothe widespread range of parameters which are notunder our direct control like temperature (internal andexternal) pressure (constant or peaks) frequency ofservice and working environment.For the same reasons, it is impossible to give scientif! i-cally based indications concerning service life of hoses,and to determine a generally valid replacementdate. This can be verified for instance with periodicalhydrostatic tests and a visual check. When in doubtplease contact our technical service.Ratings are based on room temperature.Parker ITR will cooperate by supplying sampling fortests, and carrying out tests with special chemicalproducts.

WARNINGThe service life of rubber hoses is not endless.Consequently the user must periodically check thesuitability of a rubber hose for the intended application,particularly in the presence of dangerous orpolluting chemical products or when using the hose atelevated pressures and/or temperatures.Continuous use at the highest allowed pressures andtemperatures dramatically reduces the service life of arubber hose.After use hose must be emptied out and washeddown.Many chemical products can cause severe injuries topeople or damage to property, or risks of environmentalpollution if the hose leaks or bursts.

CHEMICAL RESISTANCE TABLE

Page 8 / 120 Catalog HOSES

uytuytyiadf

sdsdc

Page 10: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

1 UNDECANOL E E E E E G E1,4-DIOXANE G G X X X X E X E X X E1-AMINO-2-PROPANOL E C G G E X1-AMINOBUTANE X C C X X C X E X X1-AMINOPENTANE G X G G X C E X1-BROMO-2 METHYL PROPANE X X X X X E G1-BROMO-3 METHYL BUTANE X X X X X X E G1-BROMOBUTANE X X X X E G1-CHLORO-2-METHYL PROPANE X X X X E G1-CHLORO-3-METHYL BUTANE C X X X X X E E E1-DECANOL C E C X E E G E1-HENDACONAL E2 (2AMINOETHYLAMINO) ETHANOL E G G G2 (2ETHOXYETHOXY) ETHANOL E G G C C G E G E X G2 (2ETHOXYETHOXY) ETHYL ACETATE G X G X X C X E X G2,4-DI-SEC-PENTYLPHENOL E2-AMINOETHANOL E G G G G G E C X2-CHLORO-1-HYDROXY-BENZENE C2-CHLOROPHENOL G G X C X X X X X X X E X E G2-CHLOROPROPANE X X X X X X X X E X E E2-ETHOXYETHANOL G G C C C G X E X C2-ETHOXYETHYL ACETATE G X G X X X X X G X E X X2-ETHYL (BUTYRALDEHYDE) G X X X E X E2-ETHYL-1-HEXANOL E E E E E E E E E X E E2-ETHYLHEXANOIC ACID C G C C E2-ETHYLHEXYL ACETATE E E X X E X2-OCTANONE G X X X E X3-BROMOPROPENE X X X X X E G3-CHLORO-2-METHYL PROPANE G3-CHLOROPROPENE C X X X X G E E G4-HYDROXY-4-METHYL-2-PENTANONE E E C C C C X G C E X XACETALDEHYDE E E C G X X E X E E G X EACETAMIDE E G E EACETIC ACID, GLACIAL G E G C E X X G X C G E E X X EACETIC ACID 10 % E E E E X B B X E F B E E X E EACETIC ACID 30 % E G E GACETIC ACID 50 % E E E E C X C C C X G E X G GACETIC ANHYDRIDE G E G E C C G X X X G E G X X EACETIC OXIDE G B E X B E G X EACETONE E G E X C C X X E C E E E X X EACETONE CYANOHYDRIN E C C B X E E G X X EACETONITRILE E E G B E C E EACETOPHENONE G E X X X X X E F X X X XACETYL ACETONE E G E X X X X X E E E X X EACETYL CHLORIDE X E C X X X X X C E G X G GACETYL OXIDE E G X C X G E E X EACETYLENE E G E C G G E E E C E E E G E EACETYLENE DICHLORIDE C C X X X X E GACETYLENE TETRACHLORIDE X X X X X X E EACROLEIN E E G G C C C E X X EACRYLIC ACID EACRYLONITRILE X E X C C E C E C X CADIPIC ACID E E E E E E EAIR +149 °C (+300 °F) G G G X G G X E X CALK-TRI X X X X E E EALLYL ALCOHOL E E E E E E E E G EALLYL BROMIDE X X X E G G GALLYL CHLORIDE G X X G G E G G GALUM E E E E E E E G E E E EALUMINUM ACETATE (AQ) G E E E G G X E E X X EALUMINUM CHLORIDE (AQ) 40 % G C E E G X E EALUMINUM FLUORIDE E E E E E E G E E E C E EALUMINUM FORMATE G X X E E EALUMINUM HYDROXIDE E E G E E E G G E E GALUMINUM NITRATE (AQ) E E E E E E E E E E C E E

Chemical or Material Conveyed Bu

tyl

CPE

EPDM

Hypa

lon

Hytre

l

Natu

ral

Neop

rene

Nitri

le

Nylo

n

SBR

Sant

opre

ne

Teflon

UHM

W

Uret

hane

Vito

n

XLPE

Page 9 / 120 Catalog HOSES

Page 11: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

ALUMINIUM PHOSPATE E E B EALUMINUM SULFATE (AQ) E E E E G E E E E G E E E G E EALUMS-NH3-CR-K E E E E E E C E E E G EAMINES – MIXED G G X G G X G X XAMINO XYLENE G C CAMINOBENZENE G CAMINODIMETHYLBENZENE G C EAMINOETHANE G E C C X X C E X XAMMONIA LIQUID E E GAMMONIUM ANHYDROUS E E GAMMONIUM CARBONATE (AQ) E E G E E G G E E E EAMMONIUM CHLORIDE (AQ) E G E G E E E G E E E E G E EAMMONIUM HYDROXIDE E E E E E E X E EAMMONIUM NITRATE (AQ) E G E E G E E E G E E E E E EAMMONIUM PHOSPHATE, DIBASIC E E E E E E E E E E E E EAMMONIUM SULPHATE (AQ) E E E E G E E E G G E E E E EAMMONIUM SULPHITE E E E E E E E E E EAMMONIUM THIOSULPHATE E E E E E E E E EAMYL ACETATE G E X C X X X G X X E E X EAMYL ACETONE G X X E X EAMYL ALCOHOL E E E E E E E G E E E E E X E EAMYL AMINE G C C C EAMYL BROMIDE E GAMYL CHLORIDE X C X X X X E X E E C E GAMYL ETHER C C EANETHOL X X X X G E G G GANILINE E G G X X X X X C X E E X C EANILINE DYES G G G G C X X G E E X C EANILINE OIL G G C E X CANIMAL FATS C E C G G E E X E E E C E EANTIMONY CHLORIDES E E G X G E E EAQUA REGIA X G X X X X X E X X E XARGON G E X E X X E E X E E E E EAROMATIC HYDROCARBONS C EARSENIC ACID E E E E G E E G E G E C E EASPHALT X X X C X X X E X E E X G E XASTM FUEL A X E X G E X G E E X X E G G E GASTM FUEL B X G X X E X X X E X X E G G E GASTM FUEL C X C X X E X X E X X E G GASTM OIL NO. 2 X E X X E X G E E X X E E G E EASTM OIL NO. 3 X X G E X C E E X X E E E E EASTM OIL NO. 4 X X X X X G X E X E EASTM OIL NO. 1 X E X G E X E E E X X E E E E EAUTOMATIC TRANSMISSION FLUID X X C E X G E G X X E E G E EBANANA OIL G C X X E E EBARIUM CHLORIDE (AQ) E G E E G E E E G E E E E E EBARIUM HYDROXIDE (AQ) E G E E G E E E G E E E E E EBARIUM SULFIDE (AQ) E E E E E E G E E E E EBEER E E E E G E E E E E EBEET SUGAR LIQUORS E G E E G E G E E E E E X E EBENZAL CHLORIDE G E E EBENZALDEHYDE G E X G X X X E X X E E X X EBENZENE X C X X C X X X G X X E G X G EBENZENE CARBOXYLIC ACID E X E X E EBENZINE X X X X C C G X E C E EBENZOIC ACID X X E X E X E E E EBENZOL C X C X G E G GBENZOTRICHLORIDE E G GBENZYL ACETATE E G X E E X EBENZYL ALCOHOL G G G C X X X C X X E E X E EBENZYL CHLORIDE X X X X X X X X E E E EBENZYL ETHER G C X X X X X E G XBIS (2-CLOROETHYL) ETHER X X X X X EBLACK SULFATE LIQUOR G C G G G G G G C G E E X EBLEACH (2 – 15 %) G E E G X X X C X E E X E G

Chemical or Material Conveyed Bu

tyl

CPE

EPD

M

Hypa

lon

Hytre

l

Natu

ral

Neop

rene

Nitri

le

Nylo

n

SBR

Sant

opre

ne

••••••••••

UHM

W

Uret

hane

Vito

n

XLPE

Page 12: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 13: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 14: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 15: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 16: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 17: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 18: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 19: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 20: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 21: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 22: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 23: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 24: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify
Page 25: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 24 / 120 Catalog HOSES

I. DUCTING HOSEThe flexible PVC-PU hose line with different hose types is suitable for a

wide range of ducting applications such as suction of several kinds of air, dust, fumes or granules.

Some hoses are also suitable for centralized suction equipment.We offer ducting hoses for highly aggressive gases.

1.1. Highly abrasion-proof hoses up to 150°C

ASPIREX PU/ANCWorking Pressure -25°C ÷ +85°C

Suction≤ I.D. 32 mm: 0,50 bar I.D. 35 mm - I.D. 102 mm: 0,40 bar> I.D. 102 mm: 0,30 bar

Tolerance I.D. & O.D. ± 4%L. ± 1%

Size 20 mm (¾”) ÷ 300 mm (12”)Burst Pressure Suitable only for suction

Hose Construction ApplicationsPU transparent and antistatic hose having a grey, rigid PVC spiral, resistant to crush, abrasion33 and ozone, with antistatic 9 wires copper cord.Food and beverage – The polyurethane used is in conformity to:- F.D.A. - CFR 21 parts 175, 105, 177, 1680, 177, 2600;- CEE 82/711, 85/572, 89/109, 90/128, 92/30, 93/8, 95/3, 98/11

Suitable for suction of warm air, abrasion dust, warm fumes, saw-dust, wood-shavings, cement, cereal grains, sugar, and other granules.

ASPIREX PU/R Working Pressure -40°C ÷ +90°C

Suction≤ I.D. 63 mm: 0,30 barI.D. 70 mm - I.D. 127 mm: 0,25 bar> I.D. 127 mm: light suction

Tolerance I.D. & O.D. ± 4%L. ± 1%

Size 25 mm (1”) ÷ 300 mm (12”)Burst Pressure Suitable only for suction

Hose Construction ApplicationsVery light and flexible hose with a transparent PU layer reinforced with a coppered steel spiral. Smooth, lightly waved inside wall causing less pressure loss. Food and beverage – The polyurethane used is in conformity to:- F.D.A. - CFR 21 parts 175, 105, 177, 1680, 177, 2600;- CEE 82/711, 85/572, 89/109, 90/128, 92/30, 93/8, 95/3, 98/11

Suction and air hose for: ventilation, smoke, dust, textile fibre. Good resistance against abrasion, oils andgrease as well as atmospheric conditions.

ASPIREX 140°

Working t°: -40°C ÷ +140°C short time to 150°C

ContructionBlack hose in Santoprene with an integrated steel spiral..

ApplicationsSuction hose for: air, smoke, vapours, exhaust gas, dust, chips, grains, pellets. Good resistance to acids and lyes, resistant also to polychloroprene (CR), against hydrocarbons, oils. Very good resistance also to abrasion, atmospheric and ageing conditions. Oil resistant as per ASTM D 2000.Recommendation: the hose has to be used in static conditions and not in dynamic conditions.

Page 26: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 25 / 120 Catalog HOSES

PROTAPE® PUR 335 MHF FLAT

-40°C to +90°C. Abrasion-proof special hose; Flat hose without reinforcement, vibration resistant, highly flexible, smooth. suitable for: •screening machines, vibrating screening machines and tumbler screening machines •as bellows and compensator •the food and pharmaceutical industry. Code NR-335-xxxx

PROTAPE® PUR-CU 335 MHF FLAT

-40°C to +90°C, short time to +125°C. Abrasion-proof special hose; Flat hose without reinforcement, vibration resistant, highly flexible, smooth interior. Especially suitable: •for screening machines, vibrating screening machines and tumbler screening machines •as bellows and compensator •for the food and pharmaceutical industry. Code NR-335-xxxx-2878

CP PUR 455 MHF

-40°C to +90 °C, short time to 125°C. Abrasion-proof suction and blast hose, especially suitable: •for abrasive solids such as dust, powder, fibres and chips •for gaseous media such as vapors and smoke •for fodder transport. Highly flexible + compressible 5:1, Code NR-455-xxxx

PROTAPE® PUR 330 MHF

-40°C to +90 °C, short time to 125°C. Abrasion-proof suction and transport hose for: dust, powder, fibres and chips; oil vapors and welding smoke; suction plants. Wall thickness 0.6мм. Code NR-330-xxxx

AIRDUC® PUR 350 MHF

-40°C to +90 °C, short time to 125°C. Universal and abrasion-proof suction and transport hose, especially suitable: •for abrasive solids such as dust, powder, fibres and chips •for gaseous media such as oil vapors and welding smoke •for de-dusting and suction plants. Wall thickness 0.7mm. Code NR-350-xxxx

PROTAPE® PUR 327 MEMORY

-40°C to +90 °C, short time to 125°C. Abrasion-proof suction and transport hose, especially suitable: • for abrasive solids such as dust, powder, fibres, chips and granulates •for gaseous and liquid media •for public utility street cleaning vehicles • for lawnmowers, grass sweeping machines and leaves exhaust•for fodder transport. Wall thickness 0.9mm. Code NR-327-xxxx.

Page 27: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 26 / 120 Catalog HOSES

AIRDUC® PUR 351 MHF

-40°C to +90 °C, short time to 125°C. Abrasion-proof suction and transport hose; Medium-heavy, smooth interior. Especially suitable for: •abrasive solids such as dust, powder, fibres, chips and granulates •gaseous and liquid media •de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibres. Wall thickness 0.9mm. Code NR-351-xxxx

AIRDUC® HT-PUR 351

-40°C to +125°C, short time to 150°C. High-temperature suction and blast hose; Medium-heavy, smooth interior, HT-PUR® up to +150 °C. Especially suitable for: •hot and abrasive solids such as dust, powder, fibres, chips and granulates •gaseous and liquid media •de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibres •printing machines, blowers and compressors Wall thickness 1mm. Code NR-351-xxxx-1015.

AIRDUC® PUR 355

-40°C to +90°C, short time to 125°C. Abrasion-proof hose for: abrasive solids such as powder, chips and granulates; for gaseous and liquid media; for industrial vacuum cleaners, granulate conveying systems, printing machines, blowers and compressors. Wall thickness 1.5mm. Code NR-355-xxxx.

AIRDUC® HT-PUR 355

-40°C to +125°C, short time to 150°C. Abrasion-proof hose for: abrasive solids such as powder, chips and granulates;for gaseous and liquid media; for industrial vacuum cleaners, granulate conveying systems, printing machines, blowers and compressors. Wall thickness 1.5mm. Code NR-355-xxxx-1015.

AIRDUC® PUR 355 REINFORCED

-40°C to +125°C, short time to 150°C. Special and abrasion-proof suction and transport hose, especially suitable:for roof gravel conveying, silo loading; as conveying and head hose for suction vehicles. NR-355-xxxx-2530.

AIRDUC® PUR 356

-40°C to +125°C, short time to 150°C. Universal and abrasion-proof suction and transport hose for: high flow-rates of extremely abrasive solids such as sand, gravel, grain, refuse glass and chips; gaseous and liquid media; silo vehicles; conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc. Wall thickness 2 - 2.5мм. Code NR-356-xxxx

Page 28: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 27 / 120 Catalog HOSES

AIRDUC® HT-PUR 356

-40°C to +125°C, short time to 150°C. Special and abrasion-proof suction and transport hose for: high flow-rates of hot and extremely abrasive solids such as sand, gravel, grain, refuse glass and chips; gaseous and liquid media; silo vehicles; conveying hose in glassworks, docks, steelworks, shipyards, quarries, cementworks etc. Wall thickness 2 - 2.5мм. Code NR-356-xxxx-1015

AIRDUC® PUR 356 MHF REINFORCED

-40°C to +125 °C, short time to +150°C. Universal and abrasion-proof suction and transport hose, especially suitable: •for high flow-rates of extremely abrasive solids such as sand, gravel, grain, refuse glass and chips; •for gaseous and liquid media •for silo vehicles; •as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc. Wall thickness 3 - 3.5mm. Code NR-356-xxxx-5100

AIRDUC® PUR 357

-40°C to +90°C, short time to +125°C. Universal and abrasion-proof suction and transport hose, especially suitable: • for high flow-rates of extremely abrasive solids such as sand, gravel, grain, refuse glass and chips; •for gaseous and liquid media •for silo vehicles; • as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc. •as robust protection conduitи. Wall thickness 4 – 5mm. Code NR-357-xxxx

AIRDUC® PUR 355 CSH

-40°C to +90°C, short time to +125°C. Abrasion-proof suction and transport hose, especially suitable:for public utility street cleaning vehicles. Wall thickness 1.5mm. Code NR-335-xxxx

AIRDUC® PUR 355 CSH REINFORCED

-40°C to +90°C, short time to +125°C. Abrasion-proof suction and transport hose, especially suitable:for public utility street cleaning vehicles. Wall thickness 1.5 – 1.8 mm. Code NR-335-xxxx-2878

AIRDUC® PUR 355 CSH ORANGE

-40°C to +90°C, short time to +125°C. Abrasion-proof suction and transport hose, especially suitable:for public utility street cleaning vehicles. Wall thickness 2.5 mm. Code NR-335-xxxx-5202

Page 29: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 28 / 120 Catalog HOSES

PROTAPE® PVC 310-20°C approx. to +70°C short time to +80 °C. Universal suction and blast hose,suitable: •for powdery solids such as dust, powder and fibres •for gaseous media such as vapors and smoke •for air conditioning and ventilation technique highly flexible + compressible 3:1. Wall thickness 0.6 mm. Code NR-310-xxxx

ASPIREXNumber

ID Wall WP VAC Weight R minmm mm bar bar kg mm

IH35562019/50 19 2,1 - 0,75 0,13 19IH35560020/50 20 2,6 - 0,75 0,14 20IH35560025/50 25 2,9 - 0,75 0,18 25IH35560030/50 30 3,1 - 0,75 0,25 30IH35562032/50 32 3,3 - 0,75 0,27 32IH35560035/50 35 3,6 - 0,75 0,30 35IH35562038/50 38 3,6 - 0,75 0,34 38IH35560040/50 40 3,9 - 0,75 0,36 40IH35560045/50 45 4,2 - 0,75 0,42 45IH35560050/50 50 4,2 - 0,75 0,52 50IH35562051/50 51 4,2 - 0,40 0,52 51IH35560060/50 60 4,4 - 0,40 0,64 60IH35561063/50 63,5 4,6 - 0,40 0,68 63,5IH35560070/50 70 4,8 - 0,40 0,76 70IH35562075/50 75 5,0 - 0,40 0,85 75IH35562076/50 76 5,0 - 0,40 0,85 76IH35560080/50 80 5,0 - 0,40 0,97 80IH35560090/30 90 5,3 - 0,40 1,12 90IH35560100/30 100 5,3 - 0,40 1,27 100IH35562102/30 102 5,3 - 0,40 1,27 102IH35561110/30 110 5,3 - 0,10 1,44 110IH35560120/30 120 5,6 - 0,10 1,58 120IH35562125/30 125 5,6 - 0,10 1,70 125IH35560130/30 130 5,7 - 0,10 1,77 130IH35560140/30 140 5,8 - 0,10 2,04 140IH35560150/30 150 5,9 - 0,10 2,15 150IH35562160/30 160 6,1 - 0,10 2,28 160IH35560200/15 200 7,0 - 0,10 2,95 200IH35560250/15 250 8,0 - 0,10 4,00 250

Temperature Range: -15°C ÷ +60 °CTolerances ID: ± 4% thickness: ± 0,50mm L: ± 1%Suitable only for suction

Hose ConstructionFlexible hose having a grey, rigid PVC spiral embedded in a metalized grey, flexible PVC wall. Externally corrugated, smooth inner surface. Self-extinguishing according to UL 94 Class V2.

ApplicationsSuitable for suction of air, dust, fumes, saw-dust and wood-shavings. Also suitable for centralized suction equipment in wood, textile, china and welding equipment. It is also suitable for use on agricultural machinery.

FLEXIREXNumber

ID Wall WP Vac Weight R minmm mm bar bar kg mm

IH35510019/50 19 2,1 – 0,75 0,12 19IH35510020/50 20 2,1 – 0,75 0,12 20IH35510025/50 25 2,5 – 0,75 0,14 25IH35510030/50 30 2,7 – 0,75 0,20 30IH35510032/50 32 2,7 – 0,75 0,22 32IH35510035/50 35 2,7 – 0,75 0,24 35IH35510038/50 38 2,7 – 0,75 0,27 38IH35510040/50 40 2,7 – 0,75 0,28 40IH35510045/50 45 3,1 – 0,75 0,34 45IH35510050/50 50 3,3 – 0,75 0,40 50IH35510060/50 60 3,8 – 0,40 0,58 60IH35510063/50 63,5 3,8 – 0,40 0,60 63,5IH35510070/50 70 4,0 – 0,40 0,70 70IH35510075/50 75 4,3 – 0,40 0,80 75IH35510076/50 76 4,3 – 0,40 0,80 76IH35510080/50 80 4,3 – 0,40 0,86 80IH35510090/30 90 4,3 – 0,40 0,90 90IH35510100/30 100 4,4 – 0,40 1,06 100IH35510120/30 120 5,2 – 0,20 1,35 120IH35510125/30 125 5,2 – 0,20 1,40 125IH35510130/30 130 5,2 – 0,20 1,60 130IH35510140/30 140 5,2 – 0,20 1,77 140IH35510150/30 150 5,4 – 0,20 1,90 150IH35510200/15 200 6,4 – 0,20 2,76 200

Temperature Range: -15°C ÷ +60 °CTolerances ID: ± 4% thickness: ± 0,50mm L: ± 1%Suitable only for suction

Hose ConstructionFlexible hose having an off-white, rigid PVC spiralembedded in an olive green, flexible PVC wall.Externally corrugated, smooth inner surface.

ApplicationsFor suction of air, dust, fumes, saw-dust. It is also suitable for air-dust, air-conditioning units and centralised suction equipment in wood-processing and varnishing factories.

1.2. PVC, EVA and PE suction and transport hoses

Page 30: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 29 / 120 Catalog HOSES

AIRDUC® PVC 341

-20°C approx. to +70°C short time to +80 °C.. Universal suction and transport hose, especially suitable: •for solids such as dust, powder and fibres •for gaseous and liquid media •for de-dusting and suction plants, air conditioning and ventilation. Wall thickness 0.9 mm. Code NR-341-xxxx.

AIRDUC® PVC 345

-20°C approx. to +70°C short time to +80 °C.. Universal suction and transport hose, especially suitable: •for solids such as dust, powder and fibres •for gaseous and liquid media •for de-dusting and suction plants, air conditioning and ventilation. Wall thickness 1.5 mm. Code NR-345-xxxx.

SuperFlex PVC 372

0°C to +85 °C. Suction and blast hose, especially suitable: •for solids such as dust, powder and fibres •for gaseous and liquid media •for domestic and industrial vacuum cleaners, building drying, welding gas extraction. Code NR-372-xxxx

EVA 373

-45°C to +65 °C. Suction hose, especially suitable: •for domestic and industrial vacuum cleaners •for cleaning swimming pools. Code NR-373-xxxx

NORPLAST® PUR 385

-40°C to +70°C, short time to +80°C. Universal and abrasion-proof suction and transport hose, especially suitable: •for abrasive solids such as dust, powder, fibres, chips and granulates; •for gaseous and liquid media; •for de-dusting and suction plants, industrial vacuum cleaners, suction of paper and textile fibresи. Wall thickness 0.5mm. Code NR-385-xxxx

NORPLAST® PUR-CU 386

-20°C to +70°C, short time to +80°C. Universal and abrasion-proof suction and transport hose, especially suitable: •for high flow-rates of abrasive solids such as powder, chips and granulates •for gaseous and liquid media •for industrial vacuum cleaners, granulate conveying systems, printing machines, blowers and compressors. Code NR-386-xxxx

1.3. SUCTION AND DISCHARGE HOSES

Page 31: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 30 / 120 Catalog HOSES

BARDUC® PVC 381

-20°C to +70°C, short time to +80°C. Universal suction and transport hose, especially suitable: •for solids such as powder, chips and pellets •for gaseous and liquid media •for pressure and vacuum pumps •for industry, agriculture and construction engineering •for reducing the ground water level. Wall thickness 3 – 8mm. Code NR-381-xxxx.

NORPLAST® PVC 383

-5°C to +60 °C, short time to +80°C. Universal suction and transport hose, especially suitable: •for solids such as dust, powder and fibres •for gaseous and liquid media •for de-dusting and suction plants, air conditioning and ventilation. Code NR-383-xxxx

NORPLAST® PVC 388 SUPERELASTIC

-25°C до +60 °C. Special suction and transport hose, especially suitable: for industry, agriculture and construction engineering. Code NR-388-xxxx

NORPLAST® PVC 380 GREEN

-5°C to +60 °C. Universal suction and transport hose, especially suitable: •for solids such as powder, chips and pellets •for gaseous and liquid media •for irrigation, fertilizers, insecticides, purifying agents •for industry, agriculture and construction engineering. Code NR-380-xxxx

NORPLAST® PVC 379 GREEN SUPERELASTIC

-25°C до +60 °C. Special suction and transport hose, especially suitable: •for irrigation, liquid manure conveying, sewer and sing cleaning •for fertilizers, insecticides, purifying agents. Code NR-379-xxxx

NORPLAST® PVC 384

-5°C to +70 °C,short time to +80°C. Universal suction and transport hose, especially suitable: •for solids such as powder, chips and pellets •for gaseous and liquid media •for de-dusting and suction plants, air conditioning and ventilation. Code NR-384-xxxx

Page 32: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 31 / 120 Catalog HOSES

NORPLAST® PVC 389 SUPERELASTIC-40°C to +60 °C. Special suction and transport hose, especially suitable: •for irrigation, liquid manure conveying, sewer and sing cleaning •for suction vehicle, silo vehicles. Code NR-389-xxxx

NORPLAST® PUR 387-20°C to +70°C, short time to +80°C. Special and abrasion-proof suctionand transport hose, especially suitable: •for high flow-rates of extremely abrasive solids such as sand, gravel, grain, refuse glass and chips •for gaseous and liquid media •for silo vehicles •as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc. Code NR-387-xxxx

1.4. AIR CONDITIONING AND VENTILATION HOSES

PROTAPE® PUR 370 -40°C to +125°C. Suction and blast hose, especially suitable: •for abrasive solids such as dust, powder, fibres and chips •for welding gas extraction •for air conditioning and ventilation technique. Waa thickness 0.25mm. Highly flexible – compressible factor 4:1. Code NR-370-xxxx

PROTAPE® PVC 371-10°C to +80°C , short time to +110°C. Suction and blast hose, especially suitable: •for abrasive solids such as dust, powder, fibres and chips •for welding gas extraction •for air conditioning and ventilation technique. Highly flexible – compressible factor 6:1. Code NR-371-xxxx

CP PE 457-10°C to +80°C , short time to +110°C. Suction and blast hose, especially suitable: •for abrasive solids such as dust, powder, fibres and chips •for welding gas extraction •for air conditioning and ventilation technique. Highly flexible – compressible factor 6:1. Code NR-457-xxxx

1.5. COMPRESSED AIR AND PNEUMATIC HOSES, PROFILES

NORFLEX® PUR 401 MHF-40°C to +90°C, short time to +125°C. Pressure hose, especially suitable:•for compressed air •for abrasive solids such as dust, powder, fibres and chips •for gaseous and liquid media. Code NR-401-xxxx

Page 33: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 32 / 120 Catalog HOSES

NORFLEX® PUR 441 MHF

-40°C to +90°C short time to +125°C. Pressure hose, especially suitable: •for compressed air •for abrasive solids such as dust, powder, fibres and chips •for gaseous and liquid media. Code NR-441-xxxx.

NORFLEX® PVC 400

-20°C to +60 °C. Pressure Hose; Hose without reinforcement, smooth interior and exterior. Especially suitable: •for gaseous and liquid media. Code NR-400-xxxx.

NORFLEX® PVC 440

-20°C to +60 °C. Pressure hose, especially suitable: •for compressed air •for gaseous and liquid media. Code NR-440-xxxx.

NORFLEX SIL 408

-60°C to +180°C. Pressure hose for the food and pharmaceutical industries (FDA); SIL-hose without reinforcement, smooth interior and exterior for: • solids • gaseous and liquid media. Complies with: FDA 21 CFR Part 177.2600 / BGW. Code NR-408-xxxx, NR-408-xxxx-2182, NR-408-2163.

NORFLEX PTFE 407

-150°C to +200°C. Pressure hose for the food and pharmaceutical industries (FDA); PTFE-hose without reinforcement, smooth interior and exterior for: for solids •for gaseous and liquid media. complies with: FDA 21 CFR Part 177.2600 / BGW. Code NR-407-xxxx

TIMBERDUC® PUR 531 SE

-40°C to +90 °C, shortly to +125°C. Flame-retardant suction and blast PU hose for the wood industry; Super-light, highly flexible + compressible 4:1. Resistant to aggressive wood types and wood preservatives, especially suitable for: • the suction of wood dust and wood chips on wood processing machines •abrasive solids such as dust, powder, fibres and chips • de-dusting and suction plants •CNC machines. Wall thickness 0.4 mm. Code: NR-531-xxxx

1.6. FLAME RETARDANT PU HOSES FOR TIMBER INDUSTRY

Page 34: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 33 / 120 Catalog HOSES

TIMBERDUC® PUR 532 SE

-40°C to +90 °C, shortly to +125°C. Flame-retardant suction and blast PU hose for the wood industry; Light, highly flexible + compressible 3:1. Resistant to aggressive wood types and wood preservatives, especially suitable for: •the suction of wood dust and wood chips on wood processing machines •abrasive solids such as dust, powder, fibres and chips •de-dusting and suction plants. Wall thickness 0.6 mm. Code: NR-532-xxxx

TIMBERDUC® PUR 533 SE

-40°C to +90 °C, shortly to +125°C. Flame-retardant suction and blast PU hose for the wood industry; Heavy, smooth interior, abrasion-proof. Resistant to aggressive wood types and wood preservatives, especially suitable for: •the suction of wood dust and wood chips on wood processing machines •abrasive solids such as dust, powder, fibres and chips •de-dusting and suction plants. Wall thickness 0.7 mm. Code: NR-533-xxxx

TIMBERDUC® PUR 534 SE

-40°C to +90 °C, shortly to +125°C. Flame-retardant suction and blast PU hose for the wood industry; Super-heavy, smooth interior, extremely abrasion-proof. Resistant to aggressive wood types and wood preservatives, especially suitable for: •the suction of wood dust and wood chips on wood processing machines •high flow-rates of abrasive solids such as powder, chips and granulates •de-dusting and suction plants. Wall thickness 1.5 mm. Code: NR-534-xxxx

PROTAPE® PUR-INOX 330 MHF-AS

-40°C to +90°C. Abr.-proof and antistatic suction and blast hose; PUR < 109Ω + stainless steel, super-light + reinforced, compressible 3:1. Suitable for: •transporting inflammable bulk materials and in areas liable to contain ex mixtures (ex protection) •abrasive solids such as dust, powder, fibres and chips •gaseous media such as vapors and smoke •de-dusting and suction plants •the food and pharmaceutical industry. Wall thickness 0.6 mm. Code: NR-330-xxxx-1018.

BARDUC PUR-INOX 382 MHF-AS

-40°C to +90°C. Antistatic suction and transport hose for the food and pharmaceutical industries; PUR < 109 Ω + stainless steel, super-heavy, smooth interior and exterior. Especially suitable for: •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (ex. protection) •gaseous and liquid media •silo vehicles. Code NR-382-1014.

1.7. ELECTRICALLY CONDUCTUCTIVE, ANTISTATIC HOSES

Page 35: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 34 / 120 Catalog HOSES

AIRDUC® PE 362 EC-35°C to +80 °C. Electrically conductive suction and blast hose; PE < 103 Ω, highly flexible + compressible, highly chemical resistant. Especially suitablefor: •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (explosion protection) •aggressive solids such as dust, powder and fibres •aggressive gaseous media such as vapors and smoke •de-dusting and suction plants. Wall thickness 0.4mm. Code NR-362-xxxx-1003.

CP PTFE-INOX 475 CE-150°C to +250°C, short time to +270°C. Electrically conductive suction andblast hose; TEFLON® < 106 Ω, super-light + compressible, highly chemical resistant. Suitable for: •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (ex protection) •aggressive solids such as dust, powder and fibres •aggressive gaseous media such as vapors and smoke •asbellows and compensator •de-dusting and suction plants. NR-475-xxxx-1003.

1.8. SPECIAL HOSES FOR THE FOOD INDUSTRY

PROTAPE® PUR-INOX 330 MHF-40°C to +90°C, short time to +125°C. Suction and blast hose for the foodand pharmaceutical industries (FDA); PUR + stainless steel, super-light +reinforced, compressible 3:1. Especially suitable for: •abrasive solids such as dust, powder, fibres and chips •gaseous media such as vapors and smoke •de-dusting and suction plants •the food and pharmaceutical industry. Wallthickness 0.6mmCode NR-330-xxxx-1103.

BARDUC PUR-INOX 382 MHF-40°C to +90°C, short time to +125°C. Abrasion-proof suction and transporthose (FDA); Super-heavy, smooth interior & exterior, vacuum-proof. Suitablefor: •high flow-rates of extremely abrasive solids such as sand, gravel, grain, refuse glass and chips •gaseous and liquid media •silo vehicles •as conveying hose in glassworks, docks, steelworks, quarries, shipyards, cementworks etc.•the food and pharmaceutical industry. Code NR-382-xxxx.

AIRDUC® PE 362 F-35°C to +80°C. Suction and transport hose for the food, pharmaceutical (FDA) and chemical industries; PE, medium-heavy, smooth interior. Especiallysuitable for: •solids such as dust, powder, fibres, chips and granulates •gaseous and liquid media •vacuum cleaners, conveying systems, blowers and compressors. Wall thickness 0.8mm. Code NR-362-xxxx.

Page 36: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 35 / 120 Catalog HOSES

CP PTFE-INOX 475 F -150°C to +250°C, short time to +270°C. Suction and blast hose for the food,pharmaceutical (FDA) and chemical industries; TEFLON® + stainless steel,

super-light, highly flexible + compressible 4:1. Especially suitable for: •aggressive solids such as dust, powder and fibres •aggressive gaseous media such as vapors and smoke •de-dusting and suction plants. Code NR-475-xxxx.

METAL HOSE 375+120°C. Suction hose, especially suitable for: •solids such as powder, chips and pellets •gaseous media •de-dusting and suction plants, air conditioningand ventilation •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (explosion protection). Code NR-375-xxxx.

METAL HOSE HT 375 +400°C. Suction hose, especially suitable for: •solids such as powder, chips and pellets •gaseous media •de-dusting and suction plants, air conditioning and ventilation •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (explosion protection). Code NR-375-xxxx-2880.

METAL HOSE INOX 376 +600°C. Suction hose, especially suitable for: •solids such as powder, chips and pellets •gaseous media •de-dusting and suction plants, air conditioning and ventilation •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (explosion protection). Code NR-376-xxxx.

METAL HOSE 377 REINFORCED+120°C. Transport hose, especially suitable for: •high flow-rates of abrasivesolids such as sand, gravel, grain, refuse glass and chips •gaseous media •silo vehicles •as conveying hose in glassworks, docks, steel-works, quarries, shipyards, cementworks etc. •transporting inflammable bulk materials and in areas liable to contain explosive mixtures (ex protection). Code NR-377-xxxx.

COOLONG HOSE-20°C to +70°C.For supplying coolant or air; Flexible, retaining any adjusted position, with threaded connector. •flexible •good resistance to alkalis and acids •good resistance to chemicals •good resistance to UV and ozone •kink-proof •retaining any adjusted position •very robust. Code 95x-xxxx-1210

1.9. METAL HOSES

Page 37: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 36 / 120 Catalog HOSES

1.10. EXHAUST GAS HOSES

PROTAPE® TPE 326 MEMORYto +200°C. Exhaust gas hose; Crush-proof, light. Especially suitable for:•suction of engine exhaust gas •hose reel •slotted floor channels •above and below floor suction extraction.Code NR-326-xxxx.

CP HYP 450 PROTECTTo +200°C. Exhaust gas hose; Vibration resistant, outer protection profile.Especially suitable for: •suction of engine exhaust gas •hose reel •slotted floor channels •above and below floor suction extraction. Code NR-450-xxxx-7500.

CP ARAMID 461 PROTECTto +300°C. Exhaust gas hose; Vibration resistant, outer protection profile, very robust. Especially suitable for: •suction of engine exhaust gas •hose reel•slotted floor channels •above and below floor suction extraction. Code NR-461-xxxx-7500.

1.11. HOT AIR HOSES, HIGH-TEMPERATURE HOSES (-200 .. +1000°C)

PROTAPE® TPE 320-40°C to +125°C, short to +150°C. High-temperature suction and blast hose; Santoprene®, super-light, highly flexible + compressible, abrasion-proof.Especially suitable for: •powdery solids such as dust, powder and fibres •gaseous media such as vapors and smoke •steam extraction •as conductor of hot and cold air •blowers and compressors. Code NR-320-xxxx.

AIRDUC® TPE 363-40°C to +125°C, short time to +150°C. High-temperature suction andtransport hose; Santoprene®, medium-heavy, smooth interior, abrasion-proof.Especially suitable for: •solids such as dust, powder and fibres •gaseous and liquid media •steam extraction •as conductor of hot and cold air •blowers and compressors. Code NR-363-xxxx.

NEO 1-35°C to +135°C, short time to +150°C. High-temperature suction and blasthose; Neoprene, single-layer, leak-proof, highly flexible. Especially suitablefor: •as conductor of hot and cold air •granulate dryers in the plastics industry•printing machines, blowers and compressors •exhaust gas technique, engine construction, engine warming, aircraft construction and military construction.Code NR-390-xxxx.

Page 38: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 37 / 120 Catalog HOSES

NEO 2-35°C to +135°C, short time to +150°C. High-temperature suction and blasthose; Neoprene, double-layer, leak-proof, smooth interior. Especially suitablefor: •as conductor of hot and cold air •granulate dryers in the plastics industry•printing machines, blowers and compressors •exhaust gas technique, engine construction, engine warming, aircraft construction and military construction.Code NR-390-xxxx-2005.

CP HYP 450-40°C to +170°C. High-temperature suction and blast hose; CSM, super-light, highly flexible + compressible 4:1. Especially suitable for: •solids such as dust, powder and fibres •gaseous media such as vapors and smoke •exhaust gas technique, engine construction, engine warming, aircraft construction and military construction •blowers and compressors. Code NR-450-xxxx.

CP PTFE/GLASS-INOX 471-150°C to +250°C short time to +270°C. Suction and blast hose; TEFLON®,double-layer, super-light + compressible 4:1. Especially suitable for: •aggressive solids such as dust, powder and fibres •aggressive gaseous media such as vapors and smoke •as bellows and compensator •de-dusting and suction plants •the chemical industry. Code NR-471-xxxx.

CP SIL 460-150°C to +250°C short time to +270°C. High-temperature suction and blasthose; Silicone, super-light, highly flexible + compressible 4:1. Especiallysuitable for: •applications, where flame-retardant hoses are demanded •solids such as dust, powder and fibres •gaseous media such as vapors and smoke •de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust •as bellows and compensator. Code NR-460-xxxx.

CP ARAMID 461-60°C to +260°C short time to +300°C. High-temperature suction and blasthose; Silicone, vibration resistant, very robust, highly flexible + compressible 4:1. Especially suitable: •where flame-retardant hoses are demanded •for solids such as dust, powder and fibres •for gaseous media such as vapors and smoke•for de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust •as bellows and compensator. Code NR-461-xxxx.

SIL1-70°C to +260°C short time to +270°C. High-temperature suction and blasthose; Silicone, single-layer, leak-proof, highly flexible. Especially suitable: •as conductor of hot and cold air •for granulate dryers in the plastics industry •for printing machines, blowers and compressors •engine construction, engine warming, aircraft construction and military construction. Code NR-391-xxxx.

Page 39: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 38 / 120 Catalog HOSES

SIL2-70°C to +260°C short time to +280°C. High-temperature suction and blasthose; Silicone, double-layer, leak-proof, smooth interior. Especially suitable:•as conductor of hot and cold air •for granulate dryers in the plastics industry•for printing machines, blowers and compressors •for exhaust gas technique, engine construction, engine warming, aircraft construction and militaryconstruction. Code NR-391-xxxx-2005.

CP HiTex 480-60°C to +400°C short time to +450°C. High-temperature suction hose; Super-light, highly flexible + compressible 3:1. Especially suitable for: •applications, where flame-retardant hoses are demanded •solids such as dust, powder and fibres •gaseous media such as vapors and smoke •de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust •asbellow and compensator. Code NR-480-xxxx.

CP HiTex 481 -60°C to +600°C short time to +700°C. High-temperature suction hose;Double-layer, light, highly flexible + compressible. Especially suitable for: •applications, where flame-retardant hoses are demanded •solids such as dust, powder and fibres •gaseous media such as vapors and smoke •de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gasexhaust •as bellows and compensator. Code NR-481-xxxx.

CP HiTex 483-60°C to +900°C short time to +1100°C. High-temperature suction and blasthose; Multi-layer, robust, insulating, extremely heat-resistant. Especiallysuitable for: •solids such as dust, powder and fibres •gaseous media such as vapors and smoke •de-dusting and suction plants, flue gas extraction, blast furnace exhaust and welding gas exhaust •exhaust gas technique, engine construction, engine warming, aircraft construction and military construction•as bellows and compensator. Code NR-483-xxxx.

1.12. SWEEPER TRUCK HOSES

STREETCLEANERThis highly flexible, internally and externally corrugated vacuum hose has an abrasion resistant rubber tube with 4” integral cuffs on each end for ease of installation. Ultra flexible and compressible construction to accommodate sweeper vacuum movements. Used for under truckinstallation.Construction:Tube: Black abrasion resistant rubberReinforcement: Helix wire with plies of fabric Cover: Black corrugatedTemperature range: -40°C to +72°C

Page 40: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 39 / 120 Catalog HOSES

II. Fire Extinguisher Hose This hose line is suitable for fire extinguisher tank-to-nozzle

connector and for hose reels for stationary installations, showing good resistance to low and high temperatures

2.1. General Purpose

FIREPRESS N/L – NR/L 20

In according to UNI EN ISO 1307/97

Temperature Range -40 °C to +80°C, with peaks to 100 °C

Tolerances I.D. I.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%Size 6 mm (⅛”) ÷ 25 mm (1”)

Hose Construction ApplicationsTube: Black, smooth, antistatic EPDM rubber compoundReinforcement: Synthetic textile yarns Cover: Black or red, smooth, EPDM rubber compound, resistant to ageing, heat, weather and particularly to ozoneElectrical Resistance: R < 108 Ω/m (black version only N/L

Suitable for fire extinguisher tank-to-nozzle connectors,good resistance to low and high temperature.

2.2. According to Norms

FIREPRESS EN 694 N/L

In according to EN 694

Working temperature -20 °C ÷ +60 °C

Tolerances I.D. I.D. 19 mm: + 1,00 mm /-0,50 mmI.D. 25 mm: ± 1,00 mm

L ± 1%Size 19 mm (¾”), 25 mm (1”)

Hose construction ApplicationsTube: Black, smooth, antistatic EPDM rubber compoundReinforcement: Synthetic textile yarnsCover: Black or red, smooth, EPDM rubber compound, resistant to ageing, heat, weather and particularly to ozone

Suitable for fire extinguisher tank-to-nozzle connectors,good resistance to low and high temperature.

FIREPRESS BS 3169 A1 NR/L

According to BS 3169 A1

Working temperature -20 °C ÷ +70 °C

TolerancesI.D ±0,60 mmL. ± 1%Concentricity ≤ 2,0 mm

Size 19 mm (¾”), 25 mm (1”)

Hose construction ApplicationsTube: Black, smooth, SBR rubbercompoundReinforcement: Synthetic textile yarnsCover: Red, smooth, abrasion, hot surface and weather resistant SBR/EPDM rubber compound

Suitable for fire-fighting purposes and for hose reels for stationary installations.Designed to minimize the decrease of section of the coiled hose.

Page 41: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 40 / 120 Catalog HOSES

FIREPRESS DIN 14818 N/L

Inaccording to DIN 14818

Working temperature -20 °C ÷ +70 °C

Tolerances I.D. ± 0,80 mmW.T. ± 0,80 mmL. ± 0,50%

Size 25 mm (1”)

Hose construction ApplicationsTube: Black, smooth, EPDM rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth, abrasion, hot surface and weather resistant

EPDM rubber compound

Suitable for fire-fighting purposes and for hose reels for stationary installations.Designed to minimize the decrease of sectionof the coiled hose.

FIREPRESS 40 EN 3

In according to UNI EN ISO 1307/97

Working temperature -40° C ÷ +100° C, with peeks at 120° C

Tolerances I.D.: ± 0,80 mmO.D.: ± 1,20 mmL: ± 1%

Size 10mm, 13 mm

Hose construction ApplicationsTube: Black, smooth, antistatic EPDM rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth, antistatic EPDM rubber compound, resistant to ageing, heat, weather

Designed for use such as tank-to-nozzle connectors with all types of portable fire extinguisher (operating with carbonic anhydride or water base fire fighting foams).

FIRECORD 40 BS 3169 A2

Inaccording to BS 3169

Working temperature -20 °C ÷ +70 °C

Tolerances I.D.: ± 0,75 mmL: ± 1%Concentricity: ≤ 2,0 mm

Size 19 mm (¾”), 25 mm (1”)

Hose construction ApplicationsTube: Black, smooth, NR/SBR rubber compoundReinforcement: Synthetic textile fabricsCover: Black, smooth, abrasion, hot surface and weather resistant SBR rubber compound

High pressure hose suitable for fire-fightingpurposes and for fire-fighting vehicles and for hose reels for stationary installations. Designed to minimize the decrease of section of the coiled hose.

Page 42: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 41 / 120 Catalog HOSES

III. AIR HOSE

Parker offers a complete range of hoses for various applications in industry,agriculture, mining, building, safety equipment, etc.

3.1. Compressed Air

PRESS® N/R 10PRESCORD N/R 20

Tº range -30 °C ÷ +80 °C

Tolerances I.D.≤ I.D. 5 mm: ± 0,60 mmI.D. 13 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%Standarts According to UNI EN ISO 1307/97

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

PRESS® N/R 10IH30301002/100 5 10,5 10 30 0,10 40IH30116064/100 13 19 10 30 0,23 105IH30111482/80 19 26 10 30 0,37 150IH30111481/50 25 33 10 30 0,54 200

PRESCORD N/R 20IH30112114/100 6 14 20 60 0,19 40IH30112105/100 8 17 20 60 0,27 50IH30112110/100 10 19 20 60 0,31 60IH30112113/100 12 21 20 60 0,35 70IH30112109/100 15 25 20 60 0,47 90IH30112135/50 19 30 20 60 0,64 110IH30112102/50 25 37 20 60 0,88 150

Tube: Black, smooth SBR nitrosamine free rubber comp.Reinforcement: Synthetic textile yarnsCover: Black (N), ribbed (/R), abrasion, ageing and weather-resistant SBR/EPDM nitrosamine free rubber compound.

ApplicationsSuitable for discharge of water, compressed air and non-aggressive liquids in many industrial and agricultural applications.

PRESS® N/L - NY/L 20

tº range: -30 °C ÷ +80 °C

Hose constructionTube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black (N) or yellow (Y), abrasion, ageing and weather-resistant, smooth (/L) SBR/EPDM nitrosamine free rubber compound

ApplicationsSuitable for compressed air with traces of oil and also for some non-aggressive fluids in a wide range of industrial applications.

!!! On request also available with coloured cover.

NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

PRESS N/L 20IH30302012/100 6 13 20 60 0,15 50IH30302001/100 6 14 20 60 0,19 50IH30302002/100 7 16 20 60 0,24 60IH30302011/100 8 15 20 60 0,19 65IH30413431/100 8 16 20 60 0,23 65IH30302003/100 8 17 20 60 0,27 65IH30302013/100 10 18 20 60 0,26 80IH30302008/100 10 19 20 60 0,31 80IH30312081/100 12 20 20 60 0,30 100IH30312071/100 13 21 20 60 0,32 105IH30302009/100 13 23 20 60 0,43 105IH30302009/40 13 23 20 60 0,43 105IH30302014/100 15 25 20 60 0,46 120IH30312072/80 16 25 20 60 0,43 130IH30302010/80 16 26 20 60 0,50 130IH30312073/40 19 29 20 60 0,57 150IH30312073/50 19 29 20 60 0,57 150IH30312073/80 19 29 20 60 0,57 150IH30302004/40 19 30 20 60 0,64 150IH30302004/80 19 30 20 60 0,64 150IH30312074/40 25 36 20 60 0,79 200IH30302006/50 25 37 20 60 0,88 200PRESS NY/L 20IH30312070/100 13 23 20 60 0,44 105IH30317104/40 15 27 20 60 0,61 130IH30312080/50 19 29 20 60 0,59 150IH30317100/40 19 30 20 60 0,66 150IH30317109/40 25 35 20 60 0,73 200IH30317098/40 25 37 20 60 0,91 200IH30317103/40 25 39 20 60 1,08 200

Page 43: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 42 / 120 Catalog HOSES

MINIERA 10MINIERA 15

tº range: -30 °C ÷ +80 °CTolerancesID: OD:

L:

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm≤ I.D. 19 mm: ± 0,79 mmI.D. 25 - 102 mm: ± 1,59 mmI.D. 110 mm: ± 2,38 mm± 1%

Hose constructionTube: Black, oil mist resistant, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabricsCover: Black, abrasion, ageing and weather-resistant SBR nitrosamine free rubber compound

ApplicationsSuitable for compressed air tools (with minimal oil traces) in factories and designed for quarries, building and mining industries.* According to NFT 47252/A on request.

NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

MINIERA 10IH36342180/40 19 29 10 30 0,56 190IH36342181/40 25 35 10 30 0,70 250IH36342182/40 30 40 10 30 0,81 300IH36342183/40 32 42 10 30 0,85 320IH36342184/40 35 45 10 30 0,92 350IH36342049/40 38 48 10 30 0,97 380IH36342185/40 40 50 10 30 1,02 400IH36342186/40 45 55 10 30 1,14 450IH36342187/40 50 60 10 30 1,25 500IH36342188/40 60 70 10 30 1,47 600IH36342193/40 63,5 73,5 10 30 1,52 635IH36342189/20 70 80 10 30 1,68 700IH36342190/20 75 86 10 30 1,99 750IH36342191/20 100 112 10 30 2,86 1000IH36342194/20 102 114 10 30 2,99 1020

MINIERA 15IH36341090/40 19 29 15 45 0,56 190IH36342300/40 19 31 15 45 0,68 190IH36341091/40 25 35 15 45 0,70 250IH36341092/40 30 41 15 45 0,89 300IH36341093/40 32 43 15 45 0,94 320IH36341094/40 35 46 15 45 1,01 350IH36341089/40 38 52 15 45 1,42 380IH36341095/40 *40 55 15 45 1,60 400IH36341096/40 45 60 15 45 1,75 450IH36341097/40 *50 65 15 45 1,98 500IH36342437/40 51 66 15 45 2,01 510IH36341098/40 60 75 15 45 2,31 600IH36341100/20 75 90 15 45 2,80 750IH36341101/20 80 95 15 45 2,93 800IH36341102/20 90 105 15 45 3,22 900IH36341103/20 100 115 15 45 3,55 1000IH36341085/20 110 125 15 45 3,86 1100

MINIERA H 15IH36341129/40 32 44 15 45 1,03 320IH36342302/40 38 54 15 45 1,64 380IH36342306/40 65 87 15 45 3,625 650

MINIERA L 15IH36341125/40 38 48 15 45 0,95 380

MINIERA 20MINIERA 25

tº range: -30 °C ÷ +80 °CTolerancesID:OD:L:

≤ 38 mm: ± 0,79 mm; > 38 mm: ± 1,59 mm≤ 19 mm: ± 0,79 mm; 25 - 102 mm: ± 1,59 mm± 1%

Hose constructionTube: Black, oil mist resistant, smooth SBR/NBR rubber compoundReinforcement: Synthetic textile fabricsCover: Black, abrasion, ageing and weather-resistant SBR nitrosamine free rubber compound

ApplicationsSuitable for compressed air tools in factories anddesigned for quarries, building and mining industries.Tube resistant to traces of oil mist for medium duty

NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

MINIERA 20IH36341113/40 19 30 20 60 0,62 190IH36341110/40 25 37 20 60 0,81 250IH36341111/40 30 46 20 60 1,39 300IH36341112/40 35 51 20 60 1,56 350IH36341120/40 40 56 20 60 1,73 400IH36341109/40 45 61 20 60 1,91 450IH36341114/40 50 66 20 60 2,08 500IH36341116/40 60 76 20 60 2,38 600IH36341107/40 63,5 79,5 20 60 2,52 650IH36341117/20 75 91 20 60 2,89 750IH36341119/20 100 118 20 60 4,23 1000

MINIERA В 20IH36341149/40 30 42 20 60 0,98 300IH36341152/40 32 44 20 60 1,04 320IH36341106/40 32 46 20 60 1,24 320IH36341150/40 35 48 20 60 1,21 350IH36341121/40 38 52 20 60 1,43 380IH36341153/40 40 54 20 60 1,45 400

MINIERA 25IH36341170/40 19 32 25 75 0,74 190IH36341172/40 25 39 25 75 0,99 250IH36341174/40 32 50 25 75 1,61 320IH36341178/40 45 64 25 75 2,23 450IH36341123/20 76 97 25 75 3,81 750

MINIERA В 25IH36341163/40 32 48 25 75 1,42 320IH36341164/40 38 54 25 75 1,62 380IH36341165/40 50 69 25 75 2,42 500IH36341166/40 51 70 25 75 2,46 500

Page 44: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 43 / 120 Catalog HOSES

MINIERA 40tº range -40 °C ÷ +100 °C

Tolerances I.D. ± 0,75 mmL ± 1%

Standarts BS 5118/3; ISO 1307

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH36348001/40 13 1/2 40 160 0,55 0,55IH36348002/40 19 3/4 40 160 0,77 0,77IH36348003/40 25 1 40 160 1,06 1,06IH36348004/40 32 1,1/4 40 160 1,45 1,45IH36348005/40 38 1,1/2 40 160 1,80 1,80IH36348000/40 51 2 40 160 2,30 2,30

Tube: Black, NBR rubber compound. Oil resistantReinforcement: One special braid of steel wireCover: Black SBR/CR rubber compound, abrasion, oils, ozone and weather resistant

ApplicationsCompressed air for mine and quarries, designed for long lasting service and maximum safety in heavy duty applications.Reference Specifications BS 5118/3 ISO 1307

AIR SP 318 N/L 15 - NY/L 15Number

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

AIR SP318 N/L 15IH30316999/40 5 10,5 15 45 0,10 40IH30311470/40 6 12 15 45 0,13 50IH30311470/100 6 12 15 45 0,13 50IH30317005/100 6 14 15 45 0,19 50IH30311472/40 7 13 15 45 0,14 60IH30311473/100 8 14 15 45 0,15 65IH30311474/40 8 15 15 45 0,19 65IH30311474/100 8 15 15 45 0,19 65IH30317001/100 8,5 16 15 45 0,21 65IH30317003/100 8 17 15 45 0,27 65IH30311476/40 9 16 15 45 0,20 75IH30311478/40 10 17 15 45 0,22 80IH30311478/100 10 17 15 45 0,22 80IH30311445/40 10 18 15 45 0,26 80IH30317004/40 10 19 15 45 0,31 80IH30311477/40 12 20 15 45 0,29 100IH30311444/100 13 20 15 45 0,27 105IH30311480/40 13 21 15 45 0,32 105IH30311480/100 13 21 15 45 0,32 105IH30311479/40 13 23 15 45 0,43 105IH30311443/50 14 24 15 45 0,45 115IH30311481/100 15 24 15 45 0,40 120IH30311446/100 16 24 15 45 0,37 130IH30311482/40 16 26 15 45 0,49 130IH30311485/50 19 27 15 45 0,43 150IH30311484/40 19 29 15 45 0,57 150IH30311484/50 19 29 15 45 0,57 150IH30311484/80 19 29 15 45 0,57 150IH30317111/40 19 30 15 45 0,63 150IH30311489/40 25 35 15 45 0,71 200IH30311489/50 25 35 15 45 0,71 200IH30311488/40 25 36 15 45 0,79 200IH30311488/50 25 36 15 45 0,79 200IH30311490/40 25 37 15 45 0,87 200

AIR SP318 NY/L 15IH30311433/100 10 17 15 45 0,24 80IH30311432/100 13 21 15 45 0,34 105IH30311431/40 19 27 15 45 0,46 150IH30311435/40 25 35 15 45 0,76 200IH30311435/50 25 35 15 45 0,76 200

tº range: -30 °C ÷ +80 °C

Tolerances:I.D.

L

≤ I.D. 5 mm: ± 0,60 mmI.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm± 1%

Hose constructionTube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black (N), antistatic (R < 1 MΩ/m), or yellow (NY) not antistatic, high abrasion and weather-resistant, smooth (/L) SBR/EPDM nitrosamine free rubber compound

ApplicationsSuitable for delivery of compressed air, water andnon-aggressive fluids for a wide range of industrialapplications. This hose when used for air compressorsis resistant to traces of oil mist.

Page 45: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 44 / 120 Catalog HOSES

3.2. Compressed Air according to Norms

AIR ISO 2398 N-T (Type 1B - 2B - 3B)

According to ISO 2398

Tº range -25 °C ÷ +80 °C

Tolerances I.D. ≤ I.D. 19 mm: ± 0,75 mmI.D. 25 mm: ± 1,25

L ± 1%Size 8 mm ÷ 25 mm

Hose construction ApplicationsTube: Black, antistatic (R < 1 MΩ/m), smooth, EPDM rubber compoundReinforcement: Synthetic textile yarns. Cover: Black, antistatic (R < 1 MΩ/m) smooth EPDM rubber compound, resistant to abrasion, ageing, heat and weathering.

Designed for air according toISO 2398 N-T (type 1B-2B-3B)

AIR NFT 47252/A

According to NFT 47252/A

tº range -30 °C ÷ +80 °C

Tolerances I.D. According to standardsL ± 1%

Size 16 mm ÷ 50 mm

Hose construction ApplicationsTube: Black, smooth SBR/NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth SBR rubber compound, resistant to abrasion, ageing and weathering.

Designed for medium and heavy duty service for delivery of air, water and non-aggressive fluids or a wide range of industrial applications. The hoses when used for air compressors are resistant to traces of oil mist. They meet NFT 47252, DIN 20018, BS 5118 Standards respectively.

Note On request also available AIR NFT 47252/B. Branding Each hose has a continuous branding according to the standards or customer’s requirement.

3.3. Compressed Air for Service Stations

STATIONPRESS N/L 20

According to UNI EN ISO 1307/97

tº range -25 °C ÷ +80 °C

Tolerances I.D. I.D. 6 - 8 mm: ± 0,80 mmL ± 1%

Size 6mm, 8mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black (N), antistatic (R < 1 MΩ/m), abrasion, oils, grease and weatherresistant, smooth (/L), NBR/EPDM rubber compound

Suitable for delivery of compressed air, water and nonaggressive fluids in service stations and car workshops.

AIRSTATION 2000 NB/L

According to UNI EN ISO 1307/97

tº range -20 °C ÷ +80 °C

Tolerances I.D. I.D. 6 - 12 mm: ± 0,80 mmL ± 1%

Size 6 mm, 7mm, 8mm, 9mm, 10mm, 12 mm

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m) SBR/NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Blue, smooth SBR/EPDM rubber compound, resistant to abrasion, oils, grease and fuels, ageing and weathering.

Suitable for delivery of compressedair, water and nonaggressive fluids in service stations and car workshops.

Page 46: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 45 / 120 Catalog HOSES

3.4. Compressed Air for Concrete Vibrator

VIBRAPRESS N/R 10 tº range -30 °C ÷ +80 °C

Tolerances I.D. ± 1,25 mmL ± 1%

ApplicationsSuitable for concrete vibrators. Its special structure is designed to protect the connecting systems and to make handling easy.

Hose constructionNumber

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH 30112520/40 25 41 10 30 1,24 150

Tube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabricCover: Black, ribbed SBR/EPDM nitrosamine free rubber compound, abrasion and weather resistant.

VIBRACORD 10

RMA steel mandrel

tº range -20 °C ÷ +80 °C

Tolerances I.D. ≤ I.D. 32 mm: ± 0,79 mm

I.D. 40 mm: ± 1,59 mm

O.D. ≤ I.D. 22 mm: ± 0,79 mm> I.D. 22 mm: ± 1,59 mm

L ± 1%Size 19 mm – 40 mm

Hose construction ApplicationsTube: Black, smooth, SBR rubber compoundReinforcement: Synthetic textile fabricCover: Black, smooth SBR rubber compound, resistant to abrasion and weathering

Designed for electrical or pneumatic vibrators for concrete

3.5. Compressed Air Insulating

ISOLPRESS B/L 20

UNI EN ISO 1307/97

tº range -25 °C ÷ +80 °C

Tolerances I.D. I.D. 8 mm: ± 0,80 mmL ± 1%

Size 8 mm

Hose construction ApplicationsTube: Blue, smooth, insulating NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Blue, smooth, insulating NBR/PVC rubber compound, resistant to ageing, heat, abrasion, ozone and weathering

Compressed air with traces of oil mist in pneumatic systems and also non-aggressive fluids in a wide range of industrialapplications. Hose designed for special applications where insulating feature and resistance to temperature are required. Insulating resistance R > 1 MΩ/m.

ISOLPRESS HT N/L 20

UNI EN ISO 1307/97

tº range -25 °C ÷ +125 °C

Tolerances I.D. I.D. 8 mm: ± 0,80 mm

L ± 1%Size 13 mm

Hose construction ApplicationsTube: Black, smooth, low permeation, NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth CSM rubber compound, resistant to ageing, heat, abrasion, ozone and weather

Compressed air with traces of oil mist for compressors, pneumatic systems and also non-aggressive fluids in a wide range of industrial applications. Hose designed for special applications where insulating feature and good resistance to temperature are required. Insulating resistance R > 1 MΩ/m.

Page 47: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 46 / 120 Catalog HOSES

3.6. Hot Compressed Air

AIRTEMP 220

RMA steel mandrel

tº range -40 °C ÷ +220 °C

Tolerances

I.D. ± 1,59 mmO.D. ± 1,59 mm

L ± 1%

Hose constructionNumber

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

AIRTEMP 220IH36346010/40 51 69 10,0 30 1,85 350IH36346011/40 60 78 10,0 30 2,13 420IH36346012/20 65 83 10,0 30 2,40 455IH36346013/20 75 93 10,0 30 2,62 550IH36346014/20 80 98 10,0 30 2,65 600

AIRTEMP 220/WNIH36346020/40 51 69 10,0 30 1,94 350IH36346021/40 60 78 10,0 30 2,26 420IH36346023/20 75 93 10,0 30 2,74 550

Tube: Black, smooth, insulating, EPR rubber compound with very good resistance to high temperatureReinforcement: Synthetic textile fabrics и влакна.Cover: Black (N), smooth, insulating, wrapped finish EPDM rubber compound, resistant to heat, abrasion, ozone and weather.

ApplicationsHot air delivery hose designed for compressors and pneumatic systems like flexible connection between motor blower and road tanker used for dry pellets, abrasive powders and granular material transportNote On request also available with clear tube (AIRTEMP 220/WN)

3.7. Breathing

DIVER-100 EN 250 N/Ltº range -30 °C ÷ +80 °C

Tolerances I.D. ± 0,5 mmO.D. -0,2 / +0,8 mL ± 1%

Hose constructionNumber

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH30310133/100 6,3 12,3 35 120 0,12 60IH30310120/100 6,3 12,5 35 120 0,13 60IH30310132/100 6,3 15,1 35 120 0,20 60IH30310121/100 7,3 13,2 35 120 0,12 75IH30310119/100 7,3 13,5 35 120 0,14 75IH30310126/100 7,3 13,7 35 120 0,15 75IH30310124/80 8 14 35 120 0,14 80

Note Available on request DIVER 100 EN 250 NY/L withyellow cover

Tube: Black, smooth, heat and ageing resistant EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth EPDM nitrosamine free rubber compound, resistant to abrasion, sea water, heat and weathering

ApplicationsFlexible hose for air supply in scuba diving systems. Designed to exceed the UNI EN 250 standard requirements (point 5,7) flexible hoses for medium pressure, related to tests on loose hoses (not assembled). Hose certified.

MASKPRESS EN 14594

Съгласно UNI EN ISO 1307/97

tº range -30 °C ÷ +80 °C

Tolerances I.D. ± 0,80 mmL ± 1%

ApplicationsFlexible hose designed for air supply in breathing devices for fire-fighting operations. Meets the requirements of UNI EN 14594 (points 6,12 - 6,13 relevant to hose without fittings).Hose construction

Tube: Black, NBR rubber compound. Heat, ageing and air resistantReinforcement: Synthetic textile yarnsCover: Black, smooth NBR rubber compound, resistant to abrasion, sea water, heat and weathering

NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH30310128/100 9,5 19 10 100 0,33 60

Page 48: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 47 / 120 Catalog HOSES

IV. Water HoseWherever water is to be transported, Parker has the ideal hose for

the job. Suction and delivery hoses have a wide range of applications and are used in many different markets. The combination of thick rubber tube and heavy textile reinforcement assures a long life. To avoid collapsing during suction, hoses can be supplied with an embedded wire-helix. The covers are particularly resistant to abrasion, weathering and ozone.

4.1. Delivery Hose

FUCINO 10 - 20Number

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

FUCINO 10IH36203251/40 25 31 10 30 0,38 –IH36203252/40 30 36 10 30 0,45 –IH36203253/40 32 38 10 30 0,47 –IH36203254/40 35 41 10 30 0,51 – IH36203240/40 38 45 10 30 0,65 –IH36203255/40 40 47 10 30 0,68 –IH36203256/40 45 52 10 30 0,75 – IH36203257/40 50 57 10 30 0,83 –IH36203260/40 51 58 10 30 0,84 –IH36203258/40 60 67 10 30 0,99 –IH36203264/40 63,5 70,5 10 30 1,04 –IH36203259/20 70 77 10 30 1,12 –IH36201101/20 75 82 10 30 1,20 –IH36203265/20 76 83 10 30 1,21 – IH36203261/20 80 87 10 30 1,27 –IH36203262/20 90 97 10 30 1,42 –IH36203263/20 100 108 10 30 1,78 – IH36203284/20 102 110 10 30 1,82 –IH36203267/20 120 128 10 30 2,12 –IH36200109/20 150 160 10 30 3,29 –

FUCINO 20IH36203276/40 50 58 20 60 0,94 –IH36203278/40 60 68 20 60 1,10 –IH36203279/20 75 86 20 60 1,92 – IH36203280/20 80 91 20 60 2,05 –IH36203281/20 90 103,5 20 60 2,68 –IH36203282/20 100 113 20 60 2,97 –IH36203283/20 120 133 20 60 3,52 –

tº range: -30 °C ÷ +80 °CTolerances:I.D.

O.D.

L

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1, ≤ O.D. 102 mm: ± 1,59 mm> O.D. 102 mm: ± 2,38 mm 59 mm± 1%

Hose constructionTube: Black, smooth SBR nitrosamine free rubber comp.Reinforcement: Synthetic textile fabricsCover: Black, abrasion, ageing and weather resistant SBR nitrosamine free rubber compound.

ApplicationsSuitable for a variety of industrial applications, where aflexible and lightweight discharge hose for water andnon-aggressive liquids are required. Specifically designed for irrigation equipment and submersible pumps.It can be rolled flat for easy transport or storage.

PRESCORD N/R 6 - 10Number

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

PRESCORD N/R 6IH30112129/100 8 13 6 18 0,12 50IH30112140/100 10 15 6 18 0,14 60IH30112106/100 12 17 6 18 0,17 70IH30112139/100 15 21 6 18 0,25 90IH30112107/50 18 25 6 18 0,35 110IH30112108/50 20 28 6 18 0,46 120IH30112131/50 22 30 6 18 0,49 130IH30112133/50 25 33 6 18 0,54 150

PRESCORD N/R 10IH30112111/100 5 10,5 10 30 0,10 30IH30112112/100 6 13 10 30 0,16 40IH30112115100 7 15 10 30 0,21 40IH30116062/100 8 15 10 30 0,19 50IH30112101/100 9 16 10 30 0,20 50IH30116063/100 10 17 10 30 0,22 60IH30112103/100 12 19 10 30 0,26 70IH30112104/100 15 23 10 30 0,36 90IH30112136/50 18 26 10 30 0,42 110IH30112137/50 19 29 10 30 0,57 110IH30112138/50 20 30 10 30 0,59 120IH30112132/50 22 32 10 30 0,64 130IH30112134/50 25 35 10 30 0,71 150IH30116066/50 30 42 10 30 1,00 180

tº range: -30 °C ÷ + 80 °C

Tolerances: According to UNI EN ISO 1307/97I.D.

L

≤ I.D. 5 m: ± 0,60 mmI.D. 6 - 20 mm: ± 0,80 mmI.D. 22 - 25 mm: ± 1,20 mm> I.D. 25 mm: ± 1,60 mm± 1%

Hose constructionTube: Black, smooth SBR nitrosamine free rubber comp.Reinforcement: Synthetic textile yarnsCover: Black (N), ribbed (/R), abrasion, ageing and weather-resistant, SBR/ EPDM nitrosamine free rubber

ApplicationsSuitable for discharge of water and non-aggressiveliquids in many industrial and agricultural application

Page 49: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 48 / 120 Catalog HOSES

PRESS® N/L 10

According to UNI EN ISO 1307/97

tº range -30 °C ÷ + 80 °C

Tolerances I.D.

≤ I.D. 5 mm: ± 0,60 mmI.D. 8 - 20 mm: ± 0,80 mmI.D. 22 - 25 mm: ± 1,20 mm> I.D. 25 mm: ± 1,60 mm

L ± 1%

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH30102102/100 5 10,5 10 30 0,10 30IH30101001/100 8 15 10 30 0,19 50IH30101002/100 10 15 10 30 0,15 60IH30101003/100 10 17 10 30 0,22 60IH30101004/100 12 17 10 30 0,17 70IH30101005/100 13 19 10 30 0,23 80IH30101006/100 15 21 10 30 0,25 90IH30101007/100 16 23 10 30 0,32 100IH30101008/80 19 26 10 30 0,37 110IH30101009/80 20 30 10 30 0,59 120IH30101010/80 22 30 10 30 0,49 130IH30101011/50 25 33 10 30 0,55 150IH30101012/50 25 35 10 30 0,70 150IH30101013/40 30 42 10 30 1,00 180IH30101014/40 32 44 10 30 1,07 190

Tube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black (N), smooth (/L), abrasion, ageing and weather-resistant SBR/EPDM nitrosamine free rubber compound

ApplicationsSuitable for discharge of water and non-aggressive liquids in many industrial and agricultural applications.

PRESS® NR/L 12

According to UNI EN ISO 1307/97

tº range -30 °C ÷ + 80 °C

Tolerances I.D. I.D. 13 - 19 mm: ± 0,80 mm

I.D. 25 mm: ± 1,20 mmL ± 1%

Hose construction NumberI.D. O.D. WP BP Weigh

t R min

mm mm bar bar kg mmIH30111460/40 13 19 12 36 0,24 80IH30111461/40 16 23 12 36 0,34 100IH30111474/40 16 24 12 36 0,40 100IH30111462/40 19 26 12 36 0,40 110IH30111475/40 19 27 12 36 0,46 110IH30111477/40 25 33 12 36 0,58 150

Tube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Red (NR), smooth (/L), abrasion, ageing and weather-resistant SBR/EPDM nitrosamine free rubber compound

ApplicationsSuitable for discharge of water and non-aggressiveliquids in many industrial and agricultural applications.

IDRO 10

RMA steel mandrel

tº range -30 °C ÷ +80 °C Number

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IDRO 10IH36203000/40 25 34 10 30 0,63 250IH36203001/40 28 37 10 30 0,69 280IH36203002/40 30 41 10 30 0,92 300IH36203003/40 32 44 10 30 1,07 320IH36203004/40 35 48 10 30 1,26 350IH36203005/40 38 52 10 30 1,46 380IH36203006/40 40 54 10 30 1,52 400IH36203007/40 42 56 10 30 1,59 420IH36203008/40 45 61 10 30 2,00 450IH36203009/40 48 64 10 30 2,11 480IH36203010/40 50 68 10 30 2,49 500IH36203011/40 60 82 10 30 3,63 600IH36203013/20 70 93 10 30 4,34 700IH36203015/20 80 103 10 30 4,88 800IH36203017/20 100 125 10 30 6,33 1000IDRO L 10IH36203087/40 19 29 10 30 0,58 –IH36203090/40 35 47 10 30 1,17 –IH36203092/40 38 50 10 30 1,20 –IH36203012/40 45 59 10 30 1,72 –IH36201004/40 48 61 10 30 1,68 –IH36203109/40 50 64 10 30 1,83 – IH36203100/40 50 66 10 30 2,18 –IH36203101/40 60 76 10 30 2,54 –IH36203110/40 63,5 78 10 30 2,03 – IH36203111/20 75 89 10 30 2,65 –IH36203103/20 75 91 10 30 2,95 –IH36203105/20 90 104 10 30 3,10 –IH36203106/20 100 114 10 30 3,41 – IH36203107/20 110 125 10 30 4,01 –IH36203108/20 120 136 10 30 4,57 –

Tolerances:I.D.

O.D.

L

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mmI.D. 25 - 100 mm: ± 1,59 mm> I.D. 100 mm: ± 2,38 mm± 1%

Suction< I.D. 80 mm: medium suction 0,5 bar≥ I.D. 80 mm: light suction 0,3 barType IDRO L: suitable only for delivery

Hose constructionTube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabricsCover: Black: abrasion, ageing and weatherresistant SBR nitrosamine free rubber compound

ApplicationsSuitable for discharge of water and non-aggressive liquids, for agricultural uses, also in industrial facilities and on building sites.

Page 50: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 49 / 120 Catalog HOSES

WATER NR 10tº range -30 °C ÷ +70 °C

Tolerances

I.D. ≤ I.D. 38 mm: ± 0,79 mm< I.D. 38 mm: ± 1,59 mm

O.D. ≤ I.D. 19 mm: ± 0,79 mmI.D. 25 - 100 mm: ± 1,59 mm

L ± 1%

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH36202185/40 32 42 10 30 0,84 –IH36203622/40 38 48 10 30 0,95 – IH36203619/40 45 55 10 30 1,11 –IH36203620/40 50 60 10 30 1,22 –IH36203623/40 63,5 73,5 10 30 1,52 – IH36203625/20 75 86 10 30 1,96 –

Tube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabricsCover: Red, smooth SBR nitrosamine free rubber compound, resistant to abrasion, ageing and weathering

ApplicationsSuitable for discharge of water and non-aggressiveliquids in many industrial and agricultural applications.

AQUAPRESS 15tº range -30 °C ÷ +100 °C

Tolerances I.D. I.D. 10 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%Standarts According to UNI EN ISO 1307/97

Hose constructionNumber

I.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH30111520/100 10 17 15 45 0,226 80IH30111521/100 13 19 15 45 0,230 100IH30111522/100 16 23 15 45 0,328 130IH30111523/80 19 26 15 45 0,380 150IH30111524/50 25 33 15 45 0,558 200

Tube: Black, smooth EPDM/SBR nitrosamine free rubber compoundReinforcement: Synthetic textile yarns Cover: Black, with four longitudinal coloured stripes (yellow), smooth, abrasion, heat, ageing and weathering resistant EPDM/SBR nitrosamine free rubber compound

ApplicationsSuitable for discharge of hot and cold water, andlightchemical medias in many industrial and agriculturalapplications.

APERFLAT LYtº range -15 °C ÷ +60 °C

Tolerances I.D. ≤ I.D. 80 mm: ± 1,00 mmI.D. 102 mm: ± 1,50 mm

L ± 1%All other technical data are subject to a ± 5 % tolerance.

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH35655025/100 25 – 6 18 0,16 – IH35655032/100 32 – 6 18 0,20 –IH35655038/100 38 – 6 18 0,24 –IH35655040/100 40 – 6 18 0,25 – IH35655051/100 51 – 6 18 0,33 –IH35655063/100 63,5 – 6 18 0,43 –IH35655076/100 76 – 4 12 0,52 –IH35655080/100 80 – 4 12 0,55 – IH35655102/100 102 – 4 12 0,73 –

Tube: Black, smooth PVCReinforcement: Synthetic textile yarnsCover: Yellow, highly abrasion and weather-resistant smooth PVC

ApplicationsLight-duty, flat wrappable hose occupying a minimumamount of space, suitable for delivery under pressure of water and non-aggressive liquids in agriculture, in the building industry, in mining and in industry in general.

Page 51: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 50 / 120 Catalog HOSES

APERFLAT MBtº range -15 °C ÷ +60 °C

Tolerances I.D. ≤ I.D. 100 mm: ± 1,00 mm> I.D. 100 mm: ± 1,50 mm

L ± 1%All other technical data are subject to a ± 5 % tolerance.

Hose construction NumberI.D. O.D. WP BP Weight R minmm mm bar bar kg mm

IH35653020/100 20 – 8 24 0,13 – IH35653025/100 25 – 8 24 0,17 –IH35653032/100 32 – 8 24 0,21 –IH35653035/100 35 – 8 24 0,23 –IH35653038/100 38 – 8 24 0,25 – IH35653040/100 40 – 8 24 0,26 –IH35653045/100 45 – 8 24 0,29 –IH35653050/100 50 – 8 24 0,37 – IH35653060/100 60 – 8 24 0,43 –IH35653063/100 63,5 – 8 24 0,46 –IH35653070/100 70 – 8 24 0,50 –IH35653075/100 75 – 8 24 0,55 –IH35653080/100 80 – 8 24 0,57 –IH35653090/100 90 – 8 24 0,73 –IH35653100/100 100 – 8 24 0,83 – IH35653150/100 150 – 3 9 1,25 –IH35653200/100 200 – 3 9 1,93 –

Tube: Black, smooth PVCReinforcement: Synthetic textile yarns. Cover: Blue, highly abrasion and weatherresistant smooth PVC.

ApplicationsMedium-duty, flat wrappable hose occupying a minimum amount of space, suitable for delivery under pressure of water and non-aggresive liquids in agriculture, in the building industry, in mining and in industry in general.

4.2. Suction and Delivery

BEVERA 10

RMA steel mandrel

NumberI.D. O.D. WP BP Weight R minmm Mm bar bar kg mm

IH36214045/40 19 29 10 30 0,67 110IH36214050/40 25 35 10 30 0,83 150IH36214051/40 30 40 10 30 0,95 180IH36214052/40 32 42 10 30 1,01 190IH36214053/40 35 45 10 30 1,08 210IH36214054/40 38 48 10 30 1,16 230IH36214055/40 40 50 10 30 1,21 240IH36214056/40 45 55 10 30 1,35 270IH36214058/40 50 60 10 30 1,50 300IH36214059/40 51 61 10 30 1,53 310IH36214060/40 60 71 10 30 1,94 360IH36214061/40 63,5 75 10 30 2,33 380IH36214063/20 70 81,5 10 30 2,59 420IH36214064/20 75 86,5 10 30 2,75 450IH36214065/40 76 87,5 10 30 2,78 460IH36214066/20 80 92,5 10 30 3,02 480IH36214067/20 90 103,5 10 30 3,66 540IH36214068/20 100 114 10 30 3,98 600IH36214069/40 102 116 10 30 4,05 610IH36214070/20 110 124 10 30 4,34 660IH36214071/20 120 134 10 30 4,73 720IH36211010/20 125 140 10 30 5,66 750IH36211050/10 150 170 10 30 7,73 900IH36211050/15 150 170 10 30 7,73 900

TolerancesI.D.

L

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm± 1%

tº range: -30 °C ÷ +80 °C

Suction: Max. 0,8 bar (600 mm Hg)

Hose constructionTube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Black: abrasion, ageing and weather-resistant SBR nitrosamine free rubber compound

ApplicationsSuction and delivery of water and non-aggressive liquids. It is recommended for loading and discharge of storage tanks, tankers, for irrigation and for all applications where a flexible and easy to handle hose is required.

Page 52: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 51 / 120 Catalog HOSES

MULTIREXNumber

I.D. O.D. WP BP Weight R minmm Mm bar bar kg mm

IH35587025/50 25 – 8 24 0,55 165IH35587030/50 30 – 8 24 0,57 195IH35587032/50 32 – 8 24 0,64 205IH35587035/50 35 – 7 21 0,66 220IH35587038/50 38 – 7 21 0,70 235IH35587040/50 40 – 7 21 0,74 245IH35587045/50 45 – 7 21 0,90 271IH35587051/50 51 – 6 18 1,05 297IH35587055/50 55 – 6 18 1,10 323IH35587060/50 60 – 6 18 1,30 350IH35587063/50 63 – 6 18 1,40 367IH35587070/50 70 – 5 15 1,65 405IH35587076/30 76 – 4,5 13,5 1,75 438IH35587080/30 80 – 4,5 13,5 1,90 450IH35587090/30 90 – 4 12 2,17 503IH35587102/30 102 – 4 12 2,70 580IH35587110/30 110 – 3 9 3,10 608IH35587120/30 120 – 3 9 3,35 668IH35587127/30 127 – 3 9 3,60 705IH35587152/20 152 – 2,5 7,5 4,50 838IH35587203/10 203 – 1,5 4,5 8,75 1105

tº range: -10 °C ÷ +60 °C

TolerancesI.D.

L On thickness

≤ I.D. 50 mm: ± 0,50 mm> I.D. 50 mm: ± 1,00 mm± 1%± 0,50 mm

Suction ≤ I.D. 50 mm: 0,70 bar I.D.: 60 - 150 mm: 0,60 bar

Hose constructionFlexible hose having an off-white, rigid PVC spiralembedded in a transparent green, flexible PVC wall

ApplicationsFor suction and delivery of water for irrigation, liquidfertilisers and general industrial uses.

MEDIREX SEtº range: -25 °C ÷ +60 °C

Tolerances I.D./O.D.L

± 4%± 1%

All other technical data are subject to a ± 5 % tolerance.

Suction ≤ I.D. 35 mm: 0,90 barI.D. 38 - 203 mm: 0,80 bar

Hose construction NumberI.D. O.D. WP BP Weight R minmm Mm bar bar kg mm

IH35587025/50 25 – 8 24 0,55 165IH35587030/50 30 – 8 24 0,57 195IH35587032/50 32 – 8 24 0,64 205IH35587035/50 35 – 7 21 0,66 220IH35587038/50 38 – 7 21 0,70 235IH35587040/50 40 – 7 21 0,74 245IH35587045/50 45 – 7 21 0,90 271IH35587051/50 51 – 6 18 1,05 297IH35587055/50 55 – 6 18 1,10 323IH35587060/50 60 – 6 18 1,30 350IH35587063/50 63 – 6 18 1,40 367IH35587070/50 70 – 5 15 1,65 405IH35587076/30 76 – 4,5 13,5 1,75 438IH35587080/30 80 – 4,5 13,5 1,90 450IH35587090/30 90 – 4 12 2,17 503IH35587102/30 102 – 4 12 2,70 580IH35587110/30 110 – 3 9 3,10 608IH35587120/30 120 – 3 9 3,35 668IH35587127/30 127 – 3 9 3,60 705IH35587152/20 152 – 2,5 7,5 4,50 838IH35587203/10 203 – 1,5 4,5 8,75 1105

Flexible hose having an off-white, rigid PVC spiralembedded in a metallic green, flexible PVC wall.

ApplicationsFor medium applications. Suction and pressure hose in many industry sectors, in construction, liquid flow, conveying of pellets, etc. Resistant to many chemicals, brine and sea water, as well as to bending. The Super Elastic type, is specially suitable for application in cool conditions, also when max. flexibility is required.

4.3. Industrial Cooling

INGLAS 30tº range -40 °C – maximum of +120 °C

The cover withstands peaks of +375 °C

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 10 mm – 85 mm

Hose construction ApplicationsTube: Black, smooth EPDM insulating rubber compound. Resistant to hot air and hot waterReinforcement: Synthetic textile fabricsCover: Black, smooth, EPDM rubber compound, heat, abrasion andweather resistant, covered by protective glass fiber

Suitable for cooling water delivery in foundries,steel and glass factories. Particularly designed towithstand short contacts with molten metal andglass.

Page 53: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 52 / 120 Catalog HOSES

4.4. Tanker

TANK CLEANERtº range -20 °C ÷ +90 °C

TolerancesI.D. ± 1,59 mmO.D. ± 1,59 mmL ± 1%

Size 38mm, 40mm, 50mm

Hose construction ApplicationsTube: Black, smooth SBR nitrosamine free rubber compoundReinforcement: Synthetic textile fabrics, embedded copper wires to provide electrical continuity between both endsCover: Black, smooth NBR/SBR rubber compound, resistant to abrasion, weather, detergent solutions and oily water

Suitable for delivery of water, sea-water anddetergent solutions, for the cleaning of fuel and oiltanks, road-tankers, and ship-tanks.

4.5. Snow

NEVE 50

RMA steel mandrel

tº range -40 °C ÷ + 100 °C

TolerancesI.D. ≤ I.D. 38 mm: ± 0,79 mm

> I.D. 38 mm: ± 1,59 mmO.D. ± 1,59 mmL ± 1%

Size 25mm, 38mm, 50mm

Hose construction ApplicationsTube: Black, antistatic, EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile fabricsCover: Blue, EPDM nitrosamine free rubber compound, abrasion,ozone, heat and weather-resistant

Specially designed for artificial snow equipment.Suitable also for air, cold and hot water and lightchemical media.

4.6. PVC Low Temperature

ARTIREXtº range -35 °C ÷ +60 °C

TolerancesI.D. / O.D. ± 4%

L ± 1%All other technical data are subject to a ± 5 % tolerance. Size 25mm – 102 mm

Hose construction ApplicationsExtremely flexible hose in special soft PVCwith a hard PVC shock resistant spiral. Standard colour: grey.

Suction and delivery hose for medium liquid loads. For medium applications in cold weather. Suction and pressure hose in many industry sectors e.g. construction, liquid flow, etc.Resistant to many chemicals, brine and sea water, as well as to bending. Very good resistance to all atmospheric conditions.

Page 54: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 53 / 120 Catalog HOSES

V. Hot Water and Steam HoseManufactured with special rubber compounds formulated to resist

the effect of steam ageing, Parker´s steam hoses conform to the latestinternational standards. Special textile reinforcement provides high safety margins with high pressures and temperatures. The cover is resistant to abrasion, ageing and heat.

5.1. Cooling System

RADIOR® 3 (coils)Number

I.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

RADIOR 3IH36830023/1 15 21 3 9 0,23 – IH36830024/1 16 25 3 9 0,38 –IH36830001/1 18 24,5 3 9 0,29 – IH36830002/1 20 26,5 3 9 0,32 –IH36830003/1 22 28,5 3 9 0,34 – IH36830004/1 25 32 3 9 0,39 – IH36830005/1 28 36 3 9 0,50 – IH36830006/1 30 38 3 9 0,53 –IH36830007/1 32 40 3 9 0,55 – IH36830008/1 35 43 3 9 0,60 –IH36830009/1 38 47 3 9 0,73 – IH36830010/1 40 49 3 9 0,77 –IH36830011/1 42 51 3 9 0,80 – IH36830012/1 45 54 3 9 0,85 –IH36831030/1 48 57 3 9 0,91 – IH36830013/1 50 60 3 9 1,07 –IH36830014/1 55 65 3 9 1,17 – IH36830015/1 60 70 3 9 1,26 –IH36831021/1 63,5 74 3 9 1,38 – IH36830016/1 65 76 3 9 1,54 –IH36830017/1 70 81 3 9 1,65 – IH36831031/1 75 86 3 9 1,75 – IH36830018/1 80 92 3 9 2,05 – IH36830019/1 90 102 3 9 2,29 – IH36830020/1 100 113 3 9 2,63 –

RADIOR L 3IH36830121/1 110 120 3 9 2,28 –

Tº range: -40 °C до +100 °C

Tolerances:I.D. ≤ I.D. 38 mm: ± 0,79 mm > I.D. 38 mm: ± 1,59 mmO.D. ≤ I.D. 22 mm: ± 0,79 mm > I.D. 22 mm: ± 1,59 mm

Hose constructionTube: Black, smooth, heat resistant EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarn fabricCover: Black, smooth, heat, ageing and weather-resistant EPDM nitrosamine free rubber compound.

ApplicationsDesigned for cooling systems of automotive engines and stationary engines.

RADIOR DIN 6

Tº range: -40 °C до +140 °C

Tolerances:I.D. ≤ I.D. 38 mm: ± 0,79 mm > I.D. 38 mm: ± 1,59 mmO.D. ± 1,59 mm

Hose constructionTube: Black, smooth, heat resistant EPDM rubber compoundaccording to DIN 73411 - 1996Reinforcement: Synthetic textile fabrics yarns. Cover: Black, smooth, wrapped finish, heat, ageing and weather-resistant EPDM rubber compound according to DIN 73411 - 1996

ApplicationsDesigned for cooling systems of automotive engines and stationary engines and for refrigerant systems.

NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH30836101/1 10 17 6,0 18,0 0,17 –IH30836102/1 12 19 6,0 18,0 0,20 –IH30836103/1 13 20 6,0 18,0 0,21 –IH30836104/1 15 22 6,0 18,0 0,23 – IH30836105/1 16 23 6,0 18,0 0,25 –IH30836106/1 18 25 6,0 18,0 0,27 –IH30836107/1 20 27 6,0 18,0 0,30 – IH30836108/1 22 29 6,0 18,0 0,33 –IH30836109/1 25 34 6,0 18,0 0,48 –IH36836110/1 28 36 6,0 18,0 0,52 – IH36836111/1 30 38 6,0 18,0 0,55 –IH36836112/1 32 40 6,0 18,0 0,58 –IH36836113/1 35 43 6,0 18,0 0,63 – IH36836114/1 38 48 6,0 18,0 0,88 –IH36836115/1 40 50 6,0 18,0 0,92 –IH36836116/1 42 52 6,0 18,0 0,96 – IH36836117/1 45 55 6,0 18,0 1,02 –IH36836118/1 48 58 6,0 18,0 1,07 –IH36836119/1 50 60 6,0 18,0 1,11 – IH36836120/1 51 61 6,0 18,0 1,13 –IH36836121/1 55 65 6,0 18,0 1,21 – IH36836122/1 60 70 6,0 18,0 1,28 – IH36836123/1 63,5 74 6,0 18,0 1,42 –IH36836124/1 65 76 6,0 18,0 1,52 – IH36836125/1 70 81 6,0 18,0 1,64 –IH36836126/1 75 86 6,0 18,0 1,74 –IH36836127/1 76 87 6,0 18,0 1,76 – IH36836128/1 80 92 6,0 18,0 2,03 –IH36836129/1 90 102 6,0 18,0 2,26 –IH36836130/1 100 113 6,0 18,0 2,71 – IH36836131/1 110 123 6,0 18,0 2,98 –

Page 55: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 54 / 120 Catalog HOSES

RADIOR K 1003

tº range: -40 °C to +140 °C

Tolerances:I.D. ≤ I.D. 38 mm: ± 0,79 mm > I.D. 38 mm: ± 1,59 mmO.D. ± 1,59 mmL ± 1%

Hose constructionTube: Black, smooth, heat resistant NBR rubber compoundReinforcement: Synthetic textile fabrics yarnsCover: Black, smooth, wrapped finish, heat, ageing and weather-resistant CR rubber compound

ApplicationsDesigned for heating and cooling systems, resistant to ASTM I/II/III oil up to +100°C (+212°F) with peaks up to +120 °C and diesel fuel up to +50 °C .

NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH30831301/40 10 17 5,0 15,0 0,206 –IH30831300/40 12 19 5,0 15,0 0,236 – IH30831302/40 15 22 5,0 15,0 0,283 –IH30831303/40 18 25 5,0 15,0 0,330 –IH30831304/40 20 27 5,0 15,0 0,361 – IH30831305/40 22 29 5,0 15,0 0,394 –IH36831300/40 25 32 5,0 15,0 0,405 –IH36831301/40 28 35 5,0 15,0 0,452 –IH36831302/40 30 37 5,0 15,0 0,479 – IH36831303/40 32 39 5,0 15,0 0,507 –IH36831304/40 35 42 5,0 15,0 0,549 –IH36831305/40 38 45 5,0 15,0 0,591 – IH36831306/20 40 51 5,0 15,0 1,003 –IH36831307/20 42 53 5,0 15,0 1,045 –IH36831308/20 45 56 5,0 15,0 1,110 –IH36831309/20 50 61 5,0 15,0 1,216 –IH36831310/20 55 66 5,0 15,0 1,323 –IH36831311/20 60 71 5,0 15,0 1,430 –IH36831312/20 65 76 5,0 15,0 1,537 – IH36831313/20 70 82 5,0 15,0 1,826 –IH36831314/20 75 89 5,0 15,0 2,256 –IH36831315/20 80 94 5,0 15,0 2,393 –IH36831317/20 90 104 5,0 15,0 2,667 –IH36831316/20 100 116 5,0 15,0 3,386 –

5.2. Hot Water

THERMOPRESS 10

According to UNI EN ISO 1307/97

Tº range: -40 °C ÷ +100 °C, with peaks +120 °C

Hose constructionTube: Black, smooth, heat resistant, EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile fabrics or yarnsCover: Black, smooth, heat, ageing and weather-resistant EPDM nitrosamine free rubber compound

ApplicationsSuitable for delivery of hot water, non-aggressive hotliquids and steam to a maximum temperature of +120 °C. To connect boilers to air conditioning units and for hot water cleaning systems. L = light duty

TolerancesI.D.

≤ I.D. 20 mm: ± 0,80 mmI.D. 25 - 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

O.D. ≤ I.D. 20 mm: ± 0,79 mm> I.D. 20 mm: ± 1,59 mm

L ± 1%Number

I.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

THERMOPRESS 10IH36800001/100 10 20,5 10 40 0,33 100IH36800002/100 12 22,5 10 40 0,38 120IH36800003/80 15 25,5 10 40 0,44 150IH36800004/80 18 28,5 10 40 0,51 180IH36800005/80 20 30,5 10 40 0,56 200IH36800006/40 25 35 10 40 0,61 250IH36800007/40 30 41 10 40 0,79 300IH36800008/40 35 48 10 40 1,09 350IH36800009/40 40 54 10 40 1,34 400IH36800010/40 45 61 10 40 1,71 450IH36800011/40 50 68 10 40 2,12 500IH36800012/40 60 82 10 40 3,10 600

THERMOPRESS L 10IH36800020/40 38 52 10 40 1,28 380IH36800013/40 42 54 10 40 1,16 420

Page 56: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 55 / 120 Catalog HOSES

TRT 204 WW 10tº range -40 °C ÷ +100 °C, with peaks +120 °C

TolerancesI.D. ± 0,79 mm

O.D. I.D. 19 mm: ± 0,79 mmI.D. 25 mm: ± 1,59 mm

RMA steel mandrel

Hose constructionTube: White, smooth, EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: White, smooth, heat, detergent solutions, abrasion, ageing and weather resistant EPDM nitrosamine free rubber compound

ApplicationsSuitable for delivery of hot water and steam, non aggressive hot liquids and detergent solutions. For hot water cleaning systems.

NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH36802052/40 19 30 10 30 0,61 160IH36802054/40 25 37 10 30 0,85 200

LAVAPRESS KTW N/L 20

Hose constructionTube: White, smooth, EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: White, smooth, heat, detergent solutions, abrasion, ageing and weather resistant EPDM nitrosamine free rubber compound

Tº range -40 °C ÷ +100 °C, with peaks +120 °C Tolerances According to EN ISO 1307/97

I.D. ± 0,80 mmO.D ± 1,59 mmL ± 1%

ApplicationsSpecifically designed for domestic appliances(washing machines and dish-washers), for transportof hot water and non-aggressive liquids.

NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH30124040/100 8 14 20 60 0,14 50IH30124041/100 10 17 20 60 0,20 60IH30124042/100 11 18 20 60 0,20 70

LAVAPRESS NG/L 30

Hose constructionTube: Black, smooth, EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Grey (NG), smooth (/L), abrasion, ageing and weather-resistant EPDM nitrosamine free rubber compound

Tº range -40 °C ÷ +95°CTolerances according to EN ISO 1307/97

I.D. ± 0,80 mmO.D ± 1,59 mmL ± 1%

ApplicationsSpecifically designed for domestic appliances (washing machines and dish-washers), for transport of hot water and non-aggressive liquids.

NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH30124007/40 10 17 30 90 0,21 80 IH30124003/40 13 20 30 90 0,25 105

5.3. Steam

RecommendationsUse only couplings with safety clamps. Follow the coupling manufacturer’s instructions for coupling procedures. Checkcoupling tightness each time before use. Drain after use. When not in use, store the hose on a flat surface (shelves) and never hang from a hook.

WARNINGSteam hoses gradually decrease in performance during service life. Consequently, they need to be regularly inspected by trained personnel wearing adequate protective overalls, including eye protection.

WARNINGS OF DANGERCuts and gouges in the hose cover showing the textile reinforcement. Steam leaks.Permanent deformation of hose. Reduction of steam flow. WHEN ONE OF THESE ABNORMALITIES OCCURS, THE HOSE SHOULD BE REMOVED FROM SERVICE AND INSPECTED. If a failure occurs close to the couplings, the damaged hose can be cut, reconnected and used as before.

Page 57: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 56 / 120 Catalog HOSES

VAPORE 164 EN ISO 6134 Type 1/A

Hose constructionTube: Black, smooth, EPM nitrosamine free rubber compound, heat and saturated steam resistant. Reinforcement: High resistant synthetic textile fabricsCover: Black or red (NR), smooth, EPDM nitrosamine free rubber compound, heat, abrasion, ozone and weather resistant. The cover is pinpricked to prevent blistering and bubbling.

ApplicationsDesigned for saturated steam (max 6 bar at +164 °C) in general industrial applications.

tº range -40 °C ÷ +164 °C

Tolerances

I.D. ≤ I.D. 38 mm: ± 0,50 mm> I.D. 38 mm: ± 0,70 mm

O.D.≤ O.D. 48 mm: ± 1,00 mmO.D. 54 mm: ± 1,20 mmO.D. 69 mm: ± 1,40 mm

L ± 1%

NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH36800138/40 10 21 6 60 0,30 100IH36800140/40 13 25 6 60 0,35 130IH36800141/40 16 30 6 60 0,39 150IH36800130/40 19 33 6 60 0,70 190IH36800131/40 25 40 6 60 0,92 250IH36800132/40 32 48 6 60 1,11 320IH36800133/40 38 54 6 60 1,42 380IH36800136/40 51 69 6 60 2,07 500

VIGOR 1 EN ISO 6134 Type 2/A

Hose constructionTube: Black, smooth, extruded IIR rubber compound. Heat and saturated steam resistant Reinforcement: Two braids of high-tensile steel wireCover: Black, smooth, extruded IIR/EPDM rubber compound. Heat, abrasion, ozone and weather resistant. Thecover is pinpricked to prevent blistering and bubbling.

tº range -40 °C ÷ + 210 °C with peaks +220 °C

Tolerances I.D. ± 0,5 mmO.D ± 1,00 mm

ApplicationsDesign for high pressure saturated steam (max 18 bar at +210 °C). Suitable for loading saturated and superheatedsteam in cleaning and sterilization applications,petrochemical industry and general steam serviceapplications.

NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH36801593/0 13 25 18,0 180,0 0,54 130IH36801594/0 16 30 18,0 180,0 0,70 160IH36801595/0 19 33 18,0 180,0 0,83 190IH36801596/0 25 40 18,0 180,0 1,08 250IH36801597/0 32 48 18,0 180,0 1,44 320IH36801598/0 38 54 18,0 180,0 1,60 380IH36801599/0 51 69 18,0 180,0 2,43 500

VIGOR 2 EN ISO 6134 Type 2/A

Hose constructionTube: Black, smooth, EPDM rubber compound, heat and saturated steam resistant Reinforcement: High tensile steel cordsCover: Black or red (NR), smooth, EPDM rubber compound, heat, abrasion, ozone and weather resistant. The cover is pinpricked to prevent blistering and bubbling.

ApplicationsDesign for high pressure saturated steam (max 18 bar at +210 °C). Suitable for the petrochemical industry and generalsteam service applications.

tº range -40 °C ÷ +210 °C with peaks +220 °C

TolerancesI.D. ≤ I.D. 38 mm: ± 0,5 mm

> I.D. 38 mm: ± 0,7 mm

O.D≤ O.D. 48 mm: ± 1,00 mmO.D. 54 mm: ± 1,2 mmO.D. 69 mm: ± 1,4 mm

NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH36801720/40 13 25 18 180 0,51 130IH36801721/40 16 30 18 180 0,70 160IH36801722/40 19 33 18 180 0,79 190IH36801723/40 25 40 18 180 1,06 250IH36801724/40 32 48 18 180 1,41 320IH36801725/40 38 54 18 180 1,62 380IH36801726/40 51 69 18 180 2,59 500

Page 58: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 57 / 120 Catalog HOSES

VI. ЗА ГАЗОВЕParker’s gas and welding hoses are manufactured according to

the more important standards. As welding applications can be hazardous and safety is of the

highest importance, it is esential that gas welding hoses are approved by the major European qualifying institutes such as IMQ and DVGW.

6.1. Welding Gas

AUTOGENE EN 559 NR/ - NB/L 20

According to UNI EN ISO 1307/97

tº range -25 °C ÷ +80 °C

Tolerances I.D. < 6,3 mm ± 0,40 mm8-10 mm ± 0,50 mm

L ± 1%Size 5 mm – 10 mm

Hose construction ApplicationsTube: Black, smooth SBR rubber compound, resistant to Welding Gases and not suitable for LPG, good resistance to ignitionReinforcement: Synthetic textile yarnsCover: Smooth (/L) or ribbed (/R), red (NR) or blue (NB), SBR/EPDM rubber compound resistant to abrasion, ageing, hot surfaces and incandescent particles

Designed for delivery of welding and allied process gases.

Important! Welding applications can be hazardous. Please take all the necessary safety precautions.

BIPRESS EN 559 B-R/L 20tº range -25 °C ÷ +80 °CTolerancesAccording toEN 559

I.D. < 6,3 mm ± 0,40 mm8-10 mm ± 0,50 mm

L ± 1%

Size 5 mm – 10 mm

Hose construction ApplicationsTube: Black, smooth SBR rubber compound, resistant to Welding gasesReinforcement: Synthetic textile yarnsCover: Red and blue, ageing and abrasionresistant, smooth SBR/EPDM rubber compound

Designed for delivery of welding and allied process gases.

Important! Welding applications can be hazardous. Please take all the necessary safety precautions.

Page 59: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 58 / 120 Catalog HOSES

SAFETYPRESS® 15-25

According to UNI EN ISO 1307/97

tº range -30 °C ÷ +100 °C with peaks to +130 °C

Tolerances I.D. ± 0,80 mmL ± 1%

SizeSAFETYPRESS NR /L15: 8, 10, 13 mmSAFETYPRESS NR /L25: 10SAFETYPRESS NB/L 25: 8, 10, 13

Hose construction ApplicationsTube: Black, self-extinguishing, smooth CR rubber compoundReinforcement: Synthetic textile yarnsCover: Blue (NB) or red (NR), smooth CSM rubber compound, self-extinguishing, resistant to abrasion, ageing, heat, oils and fuels, grease and weathering. Test according to ASTM D 2863 shows that with ambient oxygen concentration - 32 % there is no flame propagation. Normal ambientoxygen concentration is 21 %.

Particularly designed for oxygen-acetylene welding and metal cutting equipment. The hose is used in industries and ship building where heavy duty applications and high safety precautions are a must.

Important! Welding applications can be hazardous. Please take all the necessary safety precautions.

6.2. Domestic Gas

PROPANDIN NA/L 6 - 30

In compliance with DIN 4815 Teil 1approval DVGW

tº range -30 °C ÷ +70 °C

TolerancesI.D. ± 0,40 mmThickness ± 0,40 mmL ± 1%

Size PROPANDIN NA/L 6: 8 mmPROPANDIN NA/L 30: 8 mmm

Hose construction ApplicationsTube: Black, LPG resistant, smooth NBR rubber compound.Reinforcement: Synthetic textile yarnsCover: Orange, ageing-resistant, flameretarding, smooth NBR/PVC rubber compound

Suitable for delivery of butane, propane and gases for domestic appliances.

Fittings The hose is suitable for standard and DIN 74325 fittings.

CARBO G NW/L 10 - NB/R 10

According to UNI 7140

tº range -20 °C ÷ +90 °C

Tolerances I.D. ± 0,50 mmL ± 1%

SizeCARBO G NB/R 10: 8 mmCARBO G N/R 10: 8 mmCARBO G NW/L 10: 13 mm

Hose construction ApplicationsTube: Black, smooth NBR rubber compound, suitable for Domestic GasReinforcement: Synthetic textile yarnsCover: White (NW) or blue (NB), ageingresistant, smooth (/L) or ribbed (/R)SBR/EPDM rubber compound

Connection of household appliances to the gas line (NW/L) or to LPG bottles (NB/R).

Fittings The hose is suitable for standard fittings. Fittings according to UNI 7141 are recommended.Note Other cover colours available on request. CARBO G for household appliances must be replacedwithin the year shown by the branding, according to UNI 7140

Page 60: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 59 / 120 Catalog HOSES

6.3. Industrial Gas

MULTIGASPRESS EN 559 NRA/L 20

UNI EN ISO 1307

tº range -25 °C ÷ +70 °C

Tolerances I.D.< 6,3 ± 0,40 mm8 – 10mm ± 0,50 mm> 12,5 mm ± 0,60 mm

L ± 1%

Size PROPANDIN NA/L 6: 8 mmPROPANDIN NA/L 30: 8 mmm

Hose construction ApplicationsTube: Black, smooth NBR rubber compound suitable for all fuel gases included in the EN 559 Norm except fluxed fuel gases.Reinforcement: Synthetic textile yarnsCover: Red/orange, PVC/NBR, smooth rubber compound. Resistant toageing, weathering, pin-pricked cover to prevent blisters during use

Suitable for all fuel gases included in the EN 559 Norm (except fluxed fuel gases) like: acetylene, LPG, MPS, natural gas, methane.

INERPRESS EN 559 N/L 20

EN 559

tº range -25 °C ÷ +80 °C

Tolerances I.D.< 6,3 ± 0,40 mm8 – 10mm ± 0,50 mm> 12,5 mm ± 0,60 mm

L ± 1%Size 5mm – 10mm

Hose construction ApplicationsTube: Black, smooth SBR rubber compound, resistant to inert gases. Not suitable for LPGReinforcement: Synthetic textile yarnsCover: Smooth (/L), SBR/EPDM rubber compound resistant to abrasion,ageing

Suitable for all fuel gases included in the EN 559 Norm (except fluxed fuel gases) like: acetylene, LPG, MPS, natural gas, methane.

Page 61: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 60 / 120 Catalog HOSES

VII. Beverage and Food HoseThe extensive food & beverage hose range from Parker meets

most requirements in the food preparation industry. Designed for the transportation of beverages and foodstuffs. All of the Parker food hoses meet major international requirements.

Ducting hoses designed according to FDA you can find in chapter Ducting hoses

You can find PTFE hoses in chapter PTFE hoses.

7.1. General Purpose

GAMBRINUS WB 10GAMBRINUS SM WB 10

tº range -15 °C ÷ +70 °C

Tolerances

I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

O.D. ± 1,59 mmL ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Suction light suction 0,3 bar (230 mm Hg)for SM - Max. 0,8 bar (600 mm Hg)

Hose construction NumberI.D. O.D. WP BP W R minmm mm bar bar kg mm

GAMBRINUS WB 10IH36242070/40 19 31 10 30 0,70 190IH36242071/40 25 39 10 30 1,03 250IH36242069/40 30 44 10 30 1,18 300IH36242072/40 32 46 10 30 1,25 320IH36242074/40 38 54 10 30 1,67 380IH36242077/40 40 60 10 30 2,25 400IH36242073/40 50 70 10 30 2,69 500IH36242152/40 60 80 10 30 3,10 600IH36242075/20 65 85 10 30 3,34 650IH36242076/20 75 99 10 30 4,69 750IH36242155/20 100 125 10 30 6,34 1000

GAMBRINUS L WB 10IH36242150/40 20 29 10 30 0,57 200

GAMBRINUS SM WB 10IH36242083/40 19 31 10 30 0,74 115IH36242084/40 25 36 10 30 0,92 150IH36242080/40 30 42 10 30 1,10 180IH36242085/40 32 44 10 30 1,16 190IH36242060/40 35 47 10 30 1,25 210IH36242086/40 38 50 10 30 1,35 230IH36242081/40 40 52 10 30 1,41 240IH36242026/40 45 56 10 30 1,49 270IH36242087/40 50 63 10 30 1,88 300IH36242058/40 60 73 10 30 2,23 360IH36242090/40 63,5 77 10 30 2,34 380IH36242088/20 65 78 10 30 2,50 390IH36242028/20 70 84 10 30 2,95 420IH36242089/20 75 89 10 30 3,10 450IH36242078/20 80 93 10 30 3,17 480IH36242013/20 100 116 10 30 4,61 600

Tube: Beige colour, non-toxic, smooth synthetic rubber compound (conforming to Italian Legislation D.M. 21-3-1973 and to the relevant CEE directive and FDA)Reinforcement: Synthetic textile fabrics and embedded steel wire helix (for SM)Cover: Blue (WB), abrasion and weatherresistant EPDM rubber compound

ApplicationsManufactured with taste and odour-free rubber, it isrecommended for suction and delivery of all foodstuffcontaining animal or vegetable fats and oils as well as beverages such as milk, mineral water, beer, and fruit juices, wine and liqueurs (corresponding to the simulators A, B, C and D of D.M. 220 dated 26-4-93).

Recommendations The hose should be cleaned and left empty after use.

Page 62: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 61 / 120 Catalog HOSES

GAMBRINUS UPE WB SM EN 12115

СЪГЛАСНО EN 12115

tº range -15 °C ÷ +100 °C

Tolerances

ID ≤ I.D. 38 mm: ± 0,50 mmI.D. 50 mm: ± 0,70 mm> I.D. 50 mm: ± 0,80 mm

ODO.D. 31 - 51 mm: ± 1,00 mmO.D. 66 - 91 mm: ± 1,20 mm> O.D. 91 mm: ± 1,60 mm

L ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Suction Max. 0,8 bar (600 mm Hg)Hose construction

NumberI.D. O.D. WP BP W R minmm mm bar bar kg mm

IH36242301/40 19 31 16 64 0,70 190IH36242302/40 25 37 16 64 0,90 225IH36242303/40 32 44 16 64 1,20 260IH36242304/40 38 51 16 64 1,50 335IH36242305/40 50 66 16 64 2,20 410IH36242306/40 63,5 79 16 64 2,80 450IH36242307/20 75 91 16 64 3,30 525IH36242309/20 100 116 12 48 4,70 675

Tube: Smooth, white undercoat, ultra high molecular weight translucent polyethylene (UHMWPE), suitable for foodstuff contactReinforcement: Synthetic textile fabrics with embedded steel wire helix and copper wire to allow electrical connection between hose and couplingsCover: Blue, abrasion and weather resistant EPDM rubber compound

ApplicationsSuitable for suction and delivery of all foodstuffs containing animal or vegetable fats and oils as well as beverages such milk, mineral water, fruit juices, wine and liqueurs, etc., according to national and international norms such as:• U.S.A.: FDA – par. 21 CFR 177,1520• E.U. : Directive 90/128 EEC, sec. A and subsequent amendmentsRecommendations The hose should be cleaned and left empty after use. For severe or special applications, and in case of doubt, please ask for our Technical Assistance.

DRINKPRESS WB/L 10

According to UNI EN ISO 1307/97

tº range -20 °C ÷ +95 °C

Tolerances I.D. ≤ I.D. 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Hose constructionNumber

I.D. O.D. WP BP W R minmm mm bar bar kg mm

IH30240022/40 10 19 10 30 0,31 80IH30240020/40 13 23 10 30 0,42 105IH30240025/40 16 26 10 30 0,49 130IH30240030/40 19 31 10 30 0,71 150IH30240035/40 25 39 10 30 1,05 200

Tube: White colour, non-toxic, smooth NBR/ CR/IR rubber compound (conforming to Italian Legislation D.M. 21-3-1973and to the relevant CEE directive and FDA)Reinforcement: Synthetic textile yarnsCover: Blue (WB), smooth. Oils, grease, abrasion and weather-resistant NBR/PVC rubber compound

ApplicationsManufactured with taste and odour-free rubber, it isrecommended for delivery of all foodstuffs containing animal or vegetable fats and oils as well as beverages such as milk, mineral water, fruit juices, wine and liqueurs (corresponding to the simulators A, B, C and D of D.M. dated 26-4-93). Also suitable for wash-down in food processing plants such as dairies and abbatoirs, hot water and detergents.

Page 63: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 62 / 120 Catalog HOSES

ENOTRIA® 10tº range -15 °C ÷ +70 °C

TolerancesI.D. ≤ I.D. 35 mm: ± 0,79 mm

> I.D. 35 mm: ± 1,59 mmO.D. ± 1,59 mmL ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Suction light suction 0,3 bar (230 mm Hg)Size 19 - 100 mm

Hose construction ApplicationsTube: Beige colour, non-toxic, smooth synthetic rubber compound (conforming to Italian Legislation D.M. 21-3-1973 and to the relevant CEE directive and FDA)Reinforcement: Synthetic textile fabricsCover: Red (WR), abrasion and weatherresistant synthetic rubber compound

Manufactured with taste and odour-free rubber, it is recommended for light suction and delivery of beverages such as milk, mineral water, beer, and fruit juices, wine and liqueurs (corresponding to the simulators A, B and C of D.M. 220 dated 26-4-93).

Recommendations The hose should be cleaned and left empty after use.

FALERNO® 10

RMA steel mandrel

tº range -15 °C ÷ +70 °C

Tolerances I.D. ≤ I.D. 35 mm: ± 0,79 mm> I.D. 35 mm: ± 1,59 mm

L ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Suction Max. 0,8 bar (600 mm Hg)Size 25 - 120 mm

Hose construction ApplicationsTube: Beige colour, non-toxic, smooth synthetic rubber compound(conforming to Italian Legislation D.M. 21-3-1973 and to the relevant CEE directive and FDA)Reinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Red (WR), abrasion and weatherresistant EPDM rubbercompound

Manufactured with taste and odour-free rubber, it is recommended for suction and delivery of beverages such as milk, mineral water, beer, and fruit juices, wine and liqueurs (corresponding to the simulators A, B and C of D.M. 220 dated 26-4-93).

Recommendations The hose should be cleaned and left empty after use.

ALIREXtº range -10 °C ÷ +60 °C

TolerancesI.D. ≤ I.D. 50 mm: ± 0,50 mm

> I.D. 50 mm: ± 1,00 mmWall thickness ± 0,50 mmL ± 1%

All other technical data are subject to a ± 5 % tolerance.

Suction≤ I.D. 50 mm: 0,80 bar (600 mm Hg)I.D. 60 – 100 mm: 0,70 bar (530 mm Hg)I.D. 120 mm: 0,55 bar (420 mm Hg)

Size 20 - 120 mm

Hose construction ApplicationsFlexible and light hose having an off-white, rigid PVC spiral embedded in transparent PVC wall.

For suction and delivery of drinking water, soft drinks, wine, vinegar, milk and liquid foodstuffs in accordance with the European Directive 90/128 CEE Class A, B, and C. It is also used in wine and beer cellars, dairy farms, food processing and canning factories.

Page 64: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 63 / 120 Catalog HOSES

ENOREX PLUSENOREX N.A. (no abrasion)

NumberID OD WP BP W R min

mm mm bar bar kg mm

ENOREX PLUSIH35620020/50 20 29 10 30 0,36 100IH35620025/50 25 34 10 30 0,55 125IH35620030/50 30 40 10 30 0,65 150IH35620035/50 35 45 9 27 0,75 175IH35620040/50 40 50 9 27 0,85 200IH35620045/50 45 56 8 24 1,00 225IH35620050/50 50 62 8 24 1,20 250IH35620060/50 60 72 7,5 22,5 1,60 360IH35620070/50 70 84 6,5 19,5 1,90 420IH35620080/50 80 94 6,5 19,5 2,20 520IH35620100/25 100 116 5 15 3,36 650IH35620120/25 120 138 3 9 4,20 780IH35620150/25 150 171 3 9 6,30 1050

ENOREX N.A.IH35624025/50 25 – 8 24 0,55 125IH35624030/50 30 – 8 24 0,57 150IH35624032/50 32 – 8 24 0,64 160IH35624035/50 35 – 7 21 0,66 175IH35624038/50 38 – 7 21 0,70 190IH35624040/50 40 – 7 21 0,74 200IH35624040/50 45 – 7 21 0,90 225IH35624050/50 50 – 6 18 1,05 250IH35624060/50 60 – 6 18 1,30 300IH35624063/50 63 – 6 18 1,40 315IH35624070/50 70 – 5 15 1,65 350IH35624076/50 76 – 4,5 13,5 1,75 380IH35624080/50 80 – 4,5 13,5 1,90 400IH35624090/25 90 – 4 12 2,17 450IH35624100/25 100 – 4 12 2,70 500IH35624120/25 120 – 3 9 3,35 600IH35624127/25 127 – 3 9 3,60 635IH35624152/25 152 – 2,5 7,5 4,50 760

TolerancesID: ≤ 60 mm: ± 0,50 mm

70 - 100 mm: ± 0,60 mm> 100 mm: ± 0,80 mm

L ± 1%tº range: -25 °C ÷ +60 °C

Hose constructionFlexible and light hose having a red, rigid PVC spiralembedded in transparent PVC wall, manufactured withmaterials according to 2007/19/EC European Standardfor foods, and 2002/95/EC European standard RoHS.

ApplicationsFor suction and delivery of wine, and liquid foodstuffs in accordance with CE 1935/2004 Class A, B and C. It is also used in heavy duty applications in cellars, stores and docks for loading and unloading tankers and storage tankers.

APERSPIRNumber

ID OD WP BP W R minmm mm bar bar kg mm

IH35641010/30 10 3,1 12 36 0,18 23IH35641012/30 12 3,1 15 45 0,19 20IH35641014/50 14 3,1 15 45 0,23 30IH35641016/50 16 3,1 15 45 0,26 30IH35641018/50 18 3,5 12 36 0,30 40IH35641019/50 19 3,5 12 36 0,33 40IH35641020/50 20 3,5 12 36 0,34 40IH35641022/50 22 4,1 11 33 0,40 40IH35641025/25 25 4,2 11 33 0,52 50IH35641025/50 25 4,2 11 33 0,52 50IH35641030/50 30 4,2 10 30 0,63 60IH35641032/50 32 4,5 9,5 28,5 0,66 60IH35641035/50 35 4,5 8,5 25,5 0,75 70IH35641038/50 38 4,5 8 24 0,80 80IH35641040/25 40 5,0 8 24 0,95 80IH35641040/50 40 5,0 8 24 0,95 80IH35641042/50 42 5,0 7,5 22,5 1,15 84IH35641045/50 45 5,0 7,5 22,5 1,15 90IH35641050/25 50 5,4 7 21 1,30 100IH35641050/50 50 5,4 7 21 1,30 100IH35641060/25 60 6,1 6 18 1,75 120IH35641060/50 60 6,1 6 18 1,75 120IH35641063/50 63,5 6,2 6 18 1,80 130IH35641070/25 70 6,5 5 15 2,10 140IH35641070/50 70 6,5 5 15 2,10 140IH35641075/50 75 7,0 4,5 13,5 2,30 150IH35641080/50 80 7,3 4 12 2,50 160IH35641090/30 90 7,5 3 9 2,90 180IH35641100/30 100 8,0 3 9 3,65 200IH35641120/30 120 8,0 2 6 4,30 240IH35641125/30 125 8,3 2 6 4,60 250IH35641150/20 150 9,5 2 6 6,50 300

TolerancesO.D.: ± 4%On wall thickness: ± 0,50 mmLength: ± 1%All other technical data are subject to a ± 5 % tolerance.tº range: -10 °C ÷ +60 °C

Suction: 0,80 bar (600 mm Hg)

Hose constructionFlexible and light hose having an harmonic steel wire helix embedded in a transparent PVC wall.

ApplicationsSuitable for suction and delivery of foodstuffs inaccordance with the European Directive CEE 90/128Class A, B, and C.For general medium and heavy duty industrial purposes andfor agriculture applications.

Page 65: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 64 / 120 Catalog HOSES

VINITRESSNumber

ID OD WP BP W R minmm mm bar bar kg mm

IH35033227/100 5 11 20 60 0,092 30IH35033229/25 6 12 20 60 0,103 40IH35033229/100 6 12 20 60 0,103 40IH35033230/25 8 14 20 60 0,126 50IH35033230/100 8 14 20 60 0,126 50IH35033223/50 9 15 20 60 0,138 50IH35033231/25 10 16 20 60 0,149 60IH35033231/100 10 16 20 60 0,149 60IH35033232/100 12 17 12 36 0,170 75IH35033220/25 13 19 12 36 0,184 80IH35033220/50 13 19 12 36 0,184 80IH35033220/100 13 19 12 36 0,184 80IH35033222/25 15 21 12 36 0,207 90IH35033222/50 15 21 12 36 0,207 90IH35033234/100 16 22 10 30 0,218 100IH35033221/25 19 26 10 30 0,302 110IH35033221/50 19 26 10 30 0,302 110IH35033245/25 25 33 8 24 0,444 150IH35033245/50 25 33 8 24 0,444 150IH35033239/50 30 38 7 21 0,521 180IH35033241/25 32 42 7 21 0,709 190IH35033241/50 32 42 7 21 0,709 190IH35033246/25 38 48 6 18 0,824 230IH35033240/25 40 50 6 18 0,862 240IH35033242/25 50 64 5 15 1,528 300

TolerancesID: ≤ I.D. 15 mm: ± 0,5 mm

16 - 19 mm: ± 0,8 mm > 19 mm: ± 1,0 mmLength: ± 1%All other technical data are subject to a ± 5 % tolerancetº range: -20 °C ÷ +60 °C

Hose constructionFlexible, transparent PVC hose having a textilereinforcement between the walls.

ApplicationsSuitable for delivery of foodstuffs in accordance withthe European Directive 90/128 CEE Class A,B, and C.For general industrial purposes and for agricultureapplications.

7.2. Milk Tanker

MILK SM WB 10

RMA steel mandrel

tº range -40 °C ÷ +120 °C

Tolerances

On inside diameter:≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mmLength: ± 1%

CleaningHose can be washed and sterilised with usual detergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Hose construction NumberID OD WP BP W R min

mm mm bar bar kg mmIH36247031/40 25 37 10 30 0,75 75IH36247034/40 38 50 10 30 1,12 120IH36247035/40 40 53 10 30 1,28 130IH36247036/40 45 58 10 30 1,42 155IH36247037/40 51 64 10 30 1,78 170IH36247039/40 63,5 76,5 10 30 2,15 250IH36247041/20 76 90 10 30 2,77 300IH36247043/20 102 117 10 30 3,81 500

Tube: White, smooth EPDM rubber compound suitable for foods, tasteless, odourless, conforming to FDA title 21, item177.2600 for aqueous food and BgVV XXI cat. 2 for aqueous and fatty foodsReinforcement: Synthetic textile fabrics, embedded steel wire helix, FDA title 21, item 177.2600 for aqueous food and BgVV XXI cat. 2 for aqueous and fatty foodsCover: Blue (WB) NR rubber compound, resistance to abrasion, weathering and ageing.

ApplicationsPremium quality hose, specially designed for milkcollection, and also suitable for liquid food, alcoholic drink. Special features of light weight, easy handling, and high temperature resistance.Recommendations The hose should be cleaned and left empty after use.

Page 66: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 65 / 120 Catalog HOSES

7.3. Bulk Material

RESILO 5RESILO SM 5

RMA steel mandrel

tº range -30 °C ÷ +70 °C

Tolerances On inside diameter: ± 1,59 mmLength tolerance: ± 1%

CleaningHose can be washed and sterilised with usualdetergents or steam cleaned to a maximum temperature of +120 °C (+248 °F) for short periods.

Hose construction NumberID OD WP BP W R min

mm mm bar bar kg mm

RESILO 5IH36822500/40 50 66 5 15 2,10 500IH36822502/20 80 98 5 15 3,60 800IH36822504/20 100 120 5 15 5,00 1000

RESILO L 5IH36822503/20 75 85 5 15 1,74 750

RESILO SM 5IH36822530/40 50 64 5 15 2,00 300IH36822533/20 75 93 5 15 3,60 450IH36822534/20 80 98 5 15 3,80 480IH36822536/20 100 120 5 15 5,40 600

Tube: Smooth, white colour, abrasion resistant NR based food quality rubber compound suitable for solid and non-fatty liquid food. Reinforcement: Synthetic textile fabrics and built-in copperwires to provide electrical continuity between ends. Embeddedsteel wire helix(for SM)Cover: Black, smooth, weathering and abrasion resistant SBR rubber compound

ApplicationsSuitable for conveying food in granular or powder form and PVC granulates. FDA approved. Also complying with Italian D.M. n. 338 dated 22-07-98 for aqueous, acid and alcoholic liquid food.Recommendations The hose should be cleaned and left empty after use.Hoses for non food bulk materials you can find in Bulk Hoses.

7.4. Fish Pump

ITTIREXtº range -25 °C ÷ +60 °C

TolerancesOn inside/outside diameter: ± 4%Length tolerance: ± 1%All other technical data are subject to a ± 5 % tolerance.

Suction 0,80 bar (590 mm Hg)

Hose constructionNumber

ID Wallthickness

WP BP W R min

mm mm bar bar kg mmIH35626203/10 203 1,5 (PU) 1,5 4,5 3,60 1218

Flexible transparent PU hose having a grey rigid PVC spiral.

ApplicationsSuitable for suction and delivery of fish.NOTE Other diameters available on request.

Page 67: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 66 / 120 Catalog HOSES

VIII. ACID AND CHEMICAL HOSESThe Parker Chemical Hose range according to EN 12115 standard

and ITR specifications, designed to resist a wide range of aggressive chemicals.

The POLIAX UPE SM hoses can be used as suction and delivery hose for a wide range of fluids such as industrial acids, alkalis, oils, fuels and solvents.

Hoses with FEP lining are used for highly aggressive media. FEP lining provides chemical resistance for most aggressive products

Delivering chemicals over 25°C (77°F), please contact us. Many chemical products can cause severe injuries to people or damage to property, or risks of environment pollution in case of leakage or burst of the hose. All the necessary measures must be taken in order to avoid accidents both during normal service operations and during the hydrostatic tests, which must be carried out by trained personnel using suitable tools

You can find ducting hoses for aggressive vapours in chapter “DUCTING HOSES”. For light chemicals, you can visit chapter “ MULTIPURPOSE HOSES”For applications required PTFE lining you can visit also “PTFE hoses”For applications required high temterature and stainless steel hoses you can visit

“Stainless steel hoses”.

8.1. General Purpose

POLIAX® D 10

RMA steel mandrel

t° range -15 °C ÷ +100 °C

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm

> I.D. 38 mm: ± 1,59 mmO.D. ± 1,59 mm

L. ± 1%

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH36810031/40 20 29 20 40 0,45 200IH36810032/40 25 34 25 40 0,53 250IH36810033/40 30 42 30 40 0,85 300IH36810042/40 32 44 32 40 0,89 320IH36810034/40 35 48 35 40 1,05 350IH36810065/40 38 52 38 40 1,21 380IH36810035/40 40 55 40 40 1,41 400IH36810036/40 45 61 45 40 1,67 450IH36810037/40 50 68 50 40 2,08 500

Tube: Black, smooth antistatic EPM nitrosamine free rubber compoundReinforcement: Synthetic textile fabricsCover: Black, antistatic (R < 1 MΩ/m), EPDM nitrosamine free rubber compound, abrasion and weather resistant.

ApplicationsSuitable for delivery of aggressive chemicals.

Page 68: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 67 / 120 Catalog HOSES

8.2. According to Norms

CARBOBLUE N/L 10 – 20

According to UNI EN ISO 1307/97

t° range -40 °C ÷ +100 °C, with peeks at 130 °C

Tolerances I.D. ± 0,80 mmL ±1%

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

CARBOBLUEN/L 10IH30515030/100 16 23 10 30 0,27 100IH30515031/80 19 27 10 30 0,37 115IH30515032/50 25 36 10 30 0,68 150

CARBOBLUE N/L 20IH30515042/100 4 10 20 60 0,08 30IH30515043/100 6 12 20 60 0,11 40IH30515044/100 8 15 20 60 0,16 50IH30515045/100 10 17 20 60 0,19 60IH30515046/100 13 20 20 60 0,23 80IH30515040/80 16 26 20 60 0,43 100IH30515041/80 19 30 20 60 0,56 115IH30515047/50 25 37 20 60 0,76 150

Tube: Black, smooth, antistatic R<1MΩ/m, and sulphur free EPDM rubber compound with peroxide curing. Composed of 32 % urea aqueous (AUS 32/AIR1-AdBlue). Extensive tests on tensile stress, cold bending, heat, and laceration resistance on compound in contact with the additive did not show alteration of its state. In addition, no contamination of the additive was present after 168 hours at the temp. 70 °C.Reinforcement: Synthetic textile fabricsCover: Black, smooth, antistatic R<1MΩ/m, EPDM rubber compound, ageing, heat and weather resistant.

ApplicationsHose certified specially designed for additive that reduce the amount of nitrogen oxide and its mixtures (NOx). These objectives are included in European parameters EURO IV and EURO V. Suitable for applications in the engines, distributors, refuse incinerators, electrical energy systems. The hose passed the cold bending test.

POLIAX® D EN 12115POLIAX® D SM EN 12115

For aggressive chemicals. POLIAX D EN 12115 without helix, POLIAX D SM EN 12115 – with steel helixt° range -15 °C ÷ +100 °C

Tolerances

I.D I.D. 19 - 38 mm: ± 0,50 mmI.D. 50 -51 mm: ± 0,70 mmI.D. 63,5 - 100 mm: ± 0,80 mm

O.DO.D. 31 - 51 mm: ± 1,00 mmO.D. 66 - 91 mm: ± 1,20 mmO.D. 116 mm: ± 1,60 mm

L. ± 1%

Standarts In according to EN 12115,Meets TRbF 131 Tail 2 par. 5.5

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

POLIAX® D EN 12115IH36810130/40 19 31 16 64 0,56 125IH36810131/40 25 37 16 64 0,71 150IH36810132/40 32 44 16 64 0,86 175IH36810133/40 38 51 16 64 1,11 225IH36810134/40 50 66 16 64 1,72 275IH36810135/40 63,5 79 16 64 2,10 300IH36810136/40 75 91 16 64 2,56 350IH36810137/40 100 116 12 48 3,38 450

POLIAX® D SM EN 12115IH36810111/40 19 31 16 64 0,70 125IH36810112/40 25 37 16 64 0,92 150IH36810113/40 32 44 16 64 1,09 175IH36810114/40 38 51 16 64 1,35 225IH36810115/40 50 66 16 64 1,84 275IH36810116/40 63,5 79 16 64 2,54 300IH36810117/40 75 91 16 64 3,12 350IH36810118/40 100 116 12 48 4,41 450

Tube: Black, smooth antistatic EPM nitrosamine free rubber compound. Reinforcement: Synthetic textile fabrics and built-in copper wires to facilitate the electrical connection between hose and endcouplings.Cover: Black, antistatic (R < 1 M Ω/m), EPDM rubber

compound, heat, abrasion, ageing and weather resistant.

ApplicationsSuitable for delivery of highly aggressive chemicals,according to EN 12115.

Page 69: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 68 / 120 Catalog HOSES

POLIAX® UPE SM EN 12115POLIAX® UPE CON SM EN 12115POLIAX UPE SM EN 12115 – without wire for conductivity POLIAX UPE CON SM EN 12115 – with wire for conductivity

t° range-15 °C ÷ +100 °C For aggressive chemicals and solvents the hose is intended to be used at room temperature. The hose can be cleaned and sterilized with usual detergents or steam – a temperature of +130 °C for short periods.

Tolerances

I.D.19 - 38 mm: ± 0,50 mm50 mm: ± 0,70 mm63,5 - 100 mm: ± 0,80 mm

O.D.31 - 51 mm: ± 1,00 mm66 - 91 mm: ± 1,20 mm> 91 mm: ± 1,60 mm

L ±1%

Vacuum ≤ I.D. 63,5 mm: 0,90 bar (675 mm Hg)> I.D. 63,5 mm: 0,80 bar (600 mm Hg)

Standarts Manufactured according to EN 12115, meets TRbF 131 Part 2 par. 5.5 (flame resistance)

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

POLIAX® UPE SM EN 12115IH36811501/40 19 31 16 64 0,71 190IH36811502/40 25 37 16 64 0,87 230IH36811503/40 32 44 16 64 1,07 260IH36811504/40 38 51 16 64 1,35 340IH36811505/40 50 66 16 64 2,29 410IH36811507/40 63,5 79 16 64 2,51 450IH36811508/40 75 91 16 64 3,07 530IH36811510/20 100 116 12 48 4,43 680

POLIAX® UPE CON SM EN 12115IH36811529/40 19 31 16 64 0,71 190IH36811530/40 25 37 16 64 0,87 230IH36811531/40 32 44 16 64 1,07 260IH36811532/40 38 51 16 64 1,35 340IH36811534/40 50 66 16 64 2,29 410IH36811535/40 63,5 79 16 64 2,51 450IH36811536/40 75 91 16 64 3,07 530IH36811538/20 100 116 12 48 4,43 680

Tube: Translucent, smooth, non-conductive ultra high molecular weightpolyethylene (UHMWPE), suitable forfoodstuff contact according to FDA, EEC DirectiveReinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in copper wires to allow the electricalconnection between hose and couplings ( CON)Cover: Black, antistatic (R < 1 M Ω/m), EPDM rubber compound, heat, abrasion, ageing and weather resistant. Other colours available on requestе.

ApplicationsPOLIAX UPE CON SM EN 12115 is suitable for suction and delivery of a wide range of highly aggressive chemicals such as most industrial acids, alkalis, oils, fuels and solvents.It can also be used as a flexible connections in paint plants. Suitable for suction and delivery of all foodstuff containing also animal or vegetable fats and oils, according to national and international norms.Refer to the Chemical Resistant Chart to determinecompatibility with specific chemicals. For severe or special applications – for tighter bending radius – or if in doubt, please ask our Technical Assistance.

8.3. FEP Lining Hose

Технически данни на FEP Cover : Seamlessly extruded, 0.45 mm thickness, smooth therefore producing a low pressure

drop in service, easy cleaning properties. Excellent draining capability, no cross contamination or discoloration of media thus being excellent when very pure media is being carried. Diffusion resistance higher than PTFE. Conform to FDA regulations. Meets German KTW recommendations for drinking water.

Electrical conductivity: "M" - Type acc. to EN 12115. Hoses with black cover (from DN 63) have an entirely electrically conductive cover. Hoses with grey cover (up to DN 50) have a OHM conductive spiral stripe which guarantees a safe electrical conductivity of the hose assembly after the fittings have been mounted.

Page 70: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 69 / 120 Catalog HOSES

ELAFLON PLUS FEP D ELAFLON PLUS FEP SD

ELAFLON PLUS FEP Universal hose with seamless FEP lining of Teflon® resistant to all “standard” chemicals. Suitable for both suction and delivery (Type FEP D = Delivery). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from -30° up to +100° Celsius, briefly up to 130° C (chemical resistance see overleaf).Steaming out for cleaning and sterilisation permissable up to +150° C, max. 30 minutes. Meets EN 12115 and German safety standard TRbF 131/2.

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

ELAFLON® PLUS FEP DFEP-D13 13 23 16 25 0,4 100FEP-D19 19 31 16 25 0,6 125FEP-D25 25 37 16 25 0,9 150

ELAFLON® PLUS FEP SDFEP-SD19 19 31 16 25 0,7 80FEP-SD25 25 37 16 25 1,0 100FEP-SD32 32 44 16 25 1,1 120FEP-SD38 38 51 16 25 1,5 150 FEP-SD50 50 66 16 25 2,3 200FEP-SD63 63 79 16 25 2,7 250FEP-SD75 75 91 16 25 3,1 300FEP-SD100 100 116 16 25 4,6 400

Tube: Teflon® FEP, seamless, transparent, smooth bore.Intermed. Leyer : adhesive rubber compound, greyReinforcement: two braids with crossed copper wiresIntermed. Leyer : EPDM, electrically conductiveHelix : galvanised spring steel (Form SD)Cover: EPDM, electrically conductive, light grey, with OHM conductive stripe (up to DN 50) or black (DN 63-100). Abrasion and flame resistant, fabric impression, resistant against weather and ageing.

ApplicationsAs suction and discharge hose for barrels, containers, rail tankers, tankers and fixed installations.The steel helix ensures that the hose keeps in shape during suction and gravity operations, even with tight bending radii

ELAFLON EF D ELAFLON EF SD

ELAFLON ® "Blue-White-Red" universal hose for all chemical andpetroleum based products as well as solvents (see resistance chart overleaf). Ideal for foodstuff, drinking water etc. Temperature range from -30° to +100° C. Burst pressure >50 bar. - Corresponds to EN 12115 and the German safety standard TRbF 131/2. Electrical resistance <10 Ohm when connecting the metallic reinforcements.When connected only through conductive cover and bolted or pinned clamps <106 Ohm. Steaming out for cleaning and sterilisation permissable up to 130° C max. 30 minutes (open system).

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

ELAFLON® EF D EF-D13 13 22 16 25 0,4 100EF-D19 19 31 16 25 0,65 125EF-D25 25 37 16 25 0,9 150

ELAFLON® EF SDEF-SD19 19 31 16 25 0,8 90EF-SD25 25 37 16 25 1,0 100 EF-SD32 32 44 16 25 1,3 125EF-SD38 38 51 16 25 1,5 150EF-SD50 50 66 16 25 2,2 200

Tube: Fluoropolymer ELAFLON, white, smooth bore. No liquid soluble matter, non - discolouring and non - hardening. Non - electrically conducting.Reinforcement: Two textile braids with tinned copper strands.Type EFS additionally with galvanised steel helix Cover: Chloroprene (CR), black, smooth, electrically conducting. - Ozone resistant and flame proof.

ApplicationsAs suction and discharge hose for barrels, containers, tank wagons and tankers. The steel helix ensures that the hose keeps in shape during suction and gravity operations.

Page 71: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 70 / 120 Catalog HOSES

SOLVENT TRIX 500

According to EN 12115

t° range FEP, transparent, smooth bore, seamless, electrically non-conductive

Vacuum 0,8

Appovals KTW (Certificate No. VI.31/11026-4/02) · DVGW (Certificate No. W-109984-03SI) ·FDA (Certificate No. VI.31/11144-6/04) ·BfR (Certificate Nr. VI.31/11144-03/04)

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmSTS13 13 24 16 24 0,6 125STS19 19 31 16 24 0,8 185STS25 25 37 16 24 1,0 225STS32 32 44 16 24 1,2 260STS38 38 51 16 24 1,6 335STS50 50 66 16 24 2,5 410STS75 75 91 16 24 3,6 520

Tube: FEP, transparent, smooth bore, seamless, electrically non-conductiveReinforcement: low tensile textile braids, galvanised steel helix,2 crossed copper strandsCover: EPDM blue, scuff proof, non-electr. conductive

ApplicationsSpecial hose for pharmaceutical, biochemistry and food industry.

8.4. Composite Hoses

GASSOFLEX EGE 10GASSOFLEX EGE 14

t° range -20 °C ÷ +100 °CWorking pressure

GASSOFLEX EGE 10 – 10 barGASSOFLEX EGE 14 – 14 bar

Vacuum 0,8 barHose Construction Number

ID OD WP BP Weight R minmm mm bar bar kg mm

GASSOFLEX EGE 10EGE1012 32 - 10 50 0,97 74EGE1015 38 - 10 50 1,30 105EGE1020 50 - 10 50 2,01 190EGE1025 63 - 10 50 2,90 225EGE1030 75 - 10 50 3,40 290EGE1040 100 - 10 50 5,95 320

GASSOFLEX EGE 14EGE1410 25 - 14 70 0,75 68EGE1415 38 - 14 70 1,30 105EGE1420 50 - 14 70 2,01 190EGE1425 63 - 14 70 2,90 225EGE1430 75 - 14 70 3,40 290EGE1440 100 - 14 70 5,95 320

Inner helix: Polypropylen (E)Outer helix: Galvanized steel (G)Inner leyer. Polypropylen (E). Leyers. Polypropylen.

ApplicationsFor delivery and/or suction of a wide range of chemical products compatible with polypropylene in cistern trucks, railcars or fi xed deposits.

GASSOFLEX SSE 10GASSOFLEX SSE 14

t° range -20 °C ÷ +100 °C

Pressure GASSOFLEX SSE 10 – 10 barGASSOFLEX SSE 14 – 14 bar

Vacuum 0,8 bar

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX SSE 10SSE1010 25 - 10 50 0,85 68SSE1012 32 - 10 50 1,07 74SSE1015 38 - 10 50 1,50 105SSE1020 50 - 10 50 2,00 190SSE1025 63 - 10 50 3,05 225SSE1030 75 - 10 50 3,55 290SSE1040 100 - 10 50 6,40 320

GASSOFLEX SSE 14SSE1440 100 - 14 70 6,40 320

Inner helix: Stainless steel (S)Outer helix: Stainless steel (S)Inner leyer. Polypropylen (E). Leyers. Polypropylen.

ApplicationsFor delivery and/or suction of a wide range of chemical products compatible with any polypropylene and stainless steel which may come in contact with the hose both internally or externally in tank trucks, railcars or fixed deposits.

Page 72: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 71 / 120 Catalog HOSES

GASSOFLEX SST 10t° range -20 °C ÷ +100 °C

Pressure GASSOFLEX SST 10 – 10 barGASSOFLEX SST 14 – 14 bar

Vacuum 0,8 barCertification On request for each hose.

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX SST 10SST1010 25 - 10 50 0,85 68SST1012 32 - 10 50 1,07 74SST1015 38 - 10 50 1,50 105SST1020 50 - 10 50 2,00 190SST1025 63 - 10 50 3,05 225SST1030 75 - 10 50 3,55 290SST1040 100 - 10 50 6,40 320

Inner helix: Stainless steel (S)Outer helix: Stainless steel (S)Inner leyer. P.T.F.E. (T). Leyers. Polypropylen.

ApplicationsFor delivery and/or suction of a wide range of highly aggressive chemical products and is used in applications wherepolypropylene is not appropriate. Its inner lining of PTFE and the stainless steel wire spirals make it ideal in use with cistern trucks, railcars or fixed deposits.

GASSOFLEX SGT 10GASSOFLEX SGT 14

t° range -20 °C ÷ +100 °C

Pressure GASSOFLEX SGT 10 – 10 barGASSOFLEX SGT 14 – 14 bar

Vacuum 0,8 barCertification On request for each hose.

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX SGT 10SGT1010 25 - 10 50 0,85 68SGT1012 32 - 10 50 1,07 74SGT1015 38 - 10 50 1,50 105SGT1020 50 - 10 50 2,00 190SGT1025 63 - 10 50 3,05 225SGT1030 75 - 10 50 3,55 290SGT1040 100 - 10 50 6,40 320

GASSOFLEX SGT 14SGT1440 100 - 14 70 6,40 320

Inner helix: Stainless steel (S)Outer helix: Galvanized steel (G)Inner leyer. P.T.F.E. (T). Leyers. Polypropylen.

ApplicationsFor delivery and/or suction of a wide range of highly aggressive chemical products due to its inner lining of P.T.F.E. and is normally used in applications where the external wire spiral of galvanized steel does not come in contact with the product, being a cheaper alternative. It is used in cistern trucks, railcars and fixed deposits.

GASSOFLEX SGE 10GASSOFLEX SGE 14

t° range -20 °C ÷ +100 °C

Pressure GASSOFLEX SGE 10 – 10 barGASSOFLEX SGE 14 – 14 bar

Vacuum 0,8 barCertification On request for each hose.

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX SGE 10SGE1010 25 - 10 50 0,85 68SGE 1012 32 - 10 50 1,07 74SGE 1015 38 - 10 50 1,50 105SGE 1020 50 - 10 50 2,00 190SGE 1025 63 - 10 50 3,05 225SGE 1030 75 - 10 50 3,55 290SGE 1040 100 - 10 50 6,40 320

GASSOFLEX SGE 14SGE 1440 100 - 14 70 6,40 320

Inner helix: Stainless steel (S)Outer helix: Galvanized steel (G)Inner leyer. Polypropylene (E). Leyers. Polypropylene.

ApplicationsFor delivery and/or suction of a wide range of chemical products compatible with any polypropylene or stainless steel which may not come in contact with the external part of the hose. It is used in cistern trucks, railcars and fixed deposits.

Page 73: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 72 / 120 Catalog HOSES

8.5. Chemical Bunkering

GASSOFLEX MARINA 14t° range -20 °C ÷ +100 °CPressure 14 barVacuum 0,8 barCertification On request for each hose.

Hose Construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX MARINA 14EGE1460M 150 - 14 70 12 497EGE1480M 200 - 14 70 22 740EGE1400M 250 - 14 70 30 920GGE1460M 150 - 14 70 12 497GGE1480M 200 - 14 70 22 740GGE1400M 250 - 14 70 30 920SSE1460M 150 - 14 70 12 497SSE1480M 200 - 14 70 22 740SST1460M 150 - 14 70 12 497SST1480M 200 - 14 70 22 740

Inner helix: Galvanized steel (G) or Stainless steel (S)Outer helix: Galvanized steel (G) or Stainless steel (S)Inner leyer. Polypropylen (E) or P.T.F.E. (T). Leyers. Polypropylen.

ApplicationsGassoflex MARINE HEAVY DUTY is used in the loading/unloading of boats in marine applications which require a more robust hose. The product to be transferred will pre-determine the most adequate confi guration of the inner lining and inner and outer wire spirals. Various possibilities exist.

Page 74: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 73 / 120 Catalog HOSES

IX. Agricultural spray hosesParker offers two types of agricultural spray hose.FRUTPRESS rubber hose is suitable for insecticides and herbicides.APERFRUT PVC hose is used for the delivery of air, water and all

fungicide products.

9.1. Black Rubber Hose

FRUTPRESS N/L 50 - 80 - 100tº range -20 °C (-4 °F) to +80 °C (+176 °F)

TolerancesAccording to UNI EN ISO 1307/97On inside diameter: ± 0,80 mmLength tolerance: ± 1%.

Hose construction Number/LengthID OD WP BP W R min

mm mm bar bar kg mm

FRUTPRESS N/L 50IH30135001/100 8 16 50 150 0,21 50IH30135002/100 10 19 50 150 0,28 60 IH30140040/80 16 26 50 150 0,46 100

FRUTPRESS N/L 80IH30146102/100 8 18 80 240 0,21 50 IH30146103/100 10 19 80 240 0,29 60IH30146106/100 12 21 80 240 0,33 70IH30146104/100 13 23 80 240 0,40 80

FRUTPRESS N/L 100IH30136005/100 10 21 100 300 0,37 60IH30136010/80 13 24 100 300 0,45 80

Tube: Black, smooth, insecticide with solvent and herbicide resistant NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth: heat, abrasion and weather-resistant, EPDM/NBR rubber compound.

ApplicationsSuitable for insecticides and herbicide agricultural sprays.

9.2. PVC Hose

APERFRUT 20 - 40 - 80tº range -15 °C to +60 °C

Tolerances

On inside diameter:≤ I.D.16 mm: ± 0,50 mmI.D. 19 mm: ± 0,80 mm> I.D. 19 mm: ± 1,00 mmLength tolerance: ± 2 %All other technical data are subject to a ± 5 %.

Hose construction Number/LengthID OD WP BP W R min

mm mm bar bar kg mm

APERFRUT 20IH35040009/100 6 12 20 60 0,10 30IH35040010/100 8 13 20 60 0,11 30IH35040010/50 8 13 20 60 0,11 30IH35040012/100 10 15 20 60 0,135 55IH35040014/100 13 19 20 60 0,20 85IH35040015/100 16 23 20 60 0,285 90IH35040016/100 19 26,5 20 60 0,33 100IH35040017/50 25 34 15 45 0,555 140

APERFRUT 40IH35040260/100 8 14 40 120 0,142 30IH35040261/100 10 16 40 120 0,166 50IH35040112/100 10 17 40 120 0,203 45IH35040114/100 13 21 40 120 0,285 80

APERFRUT 80IH35040268/100 8 15 80 208 0,165 25IH35040270/100 10 18 80 208 0,230 45IH35040213/100 10 19 80 208 0,270 40IH35040214/100 13 23 70 180 0,380 60

Tube: Black, smooth, PVC compoundReinforcement: Synthetic textile yarnsCover: Orange (20), red (40) and blue (80), smooth, abrasion, and weatherresistantPVC compound.

ApplicationsFor delivery of air, water and all fungicide products.Particularly suitable for spraying in agriculture. Resistant to compressor oil-mist.

Page 75: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 74 / 120 Catalog HOSES

X. Oil and Fuel HosesHoses designed for the suction and delivery of petroleum

products, fuels and mineral oil.Applications include hydraulic systems, loading and discharge of

tankers, petrol pumps and severe service conditions.DAIS’s oil and fuel hoses fulfil the latest international standards

(such as EN 1360, SAE J 200, EN ISO 7840 A1, EN 12115, etc).

10.1. General Purpose

CARBOPRESS® N/L 10 - 20

In according to UNI EN ISO 1307/97

NumberID OD WP BP Weight R min

mm mm Bar bar kg mm

CARBOPRESS N/L 10IH30501008/100 5 11 10 30 0,12 40IH30501001/100 5 12 10 30 0,12 40IH30511003/100 6 12 10 30 0,11 50IH30511002/100 6 13 10 30 0,14 50IH30511021/100 7 13 10 30 0,13 60IH30511016/100 8 14 10 30 0,14 65IH30501002/100 8 15 10 30 0,17 65IH30501003/100 10 17 10 30 0,20 80IH30501004/100 13 20 10 30 0,24 105IH30501005/100 15 23 10 30 0,32 120IH30511004/100 16 23 10 30 0,29 130IH30511007/80 18 26 10 30 0,37 150IH30501006/40 19 27 10 30 0,39 150IH30501007/50 25 35 10 30 0,63 200

CARBOPRESS HH N/LIH30508000/80 19 27 10 30 0,39 150IH30508001/40 25 35 10 30 0,63 200

CARBOPRESS N/L 20IH30502001/100 6 14 20 60 0,17 50IH30502002/100 8 17 20 60 0,24 65IH30502003/100 10 19 20 60 0,27 80IH30512006/100 13 23 20 60 0,38 105IH30512010/80 16 26 20 60 0,44 130IH30512007/80 19 30 20 60 0,57 150IH30512009/50 25 36 20 60 0,71 200

Working tº: -25 °C ÷ + 80 °CTolerances:I.D.

L

≤ I.D. 5 mm: ± 0,60 mmI.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm± 1%

Hose constructionTube: Black, smooth, NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth, abrasion, oil, fuel, and weather-resistant, antistatic (R < 1 MΩ/m) special NBR/EPDMrubber compound

ApplicationsSuitable for fuel oils, petrol and diesel having an aromatic content not exceeded 50 % and also for grease.

CARBOCORD 10 - 15

RMA steel mandrel

NumberID OD WP BP Weight R min

mm mm Bar bar kg mm

CARBOCORD 10IH36522124/40 25 35 10 30 0,66 250IH36522138/40 30 41 10 30 0,84 300IH36522133/40 35 48 10 30 1,17 350IH36522110/40 38 51 10 30 1,25 380IH36522131/40 40 54 10 30 1,42 400IH36522136/40 45 59 10 30 1,57 450IH36522144/40 48 62 10 30 1,67 480IH36522128/40 51 65 10 30 1,76 500IH36523109/40 60 75 10 30 2,07 600IH36522112/40 63,5 79 10 30 2,32 650IH36523110/20 70 86 10 30 2,55 700IH36523111/20 75 91 10 30 2,79 750IH36523112/20 80 96 10 30 2,95 800IH36523113/20 90 106 10 30 3,20 900IH36523114/20 100 116 10 30 3,61 1000

CARBOCORD L10IH36522134/40 32 44 10 30 0,98 320

CARBOCORD H10IH36522097/40 32 46 10 30 1,17 320IH36522098/40 38 53 10 30 1,45 380

CARBOCORD 15IH36523101/40 19 30 15 45 0,55 250IH36523102/40 25 36 15 45 0,69 250IH36523103/40 30 41 15 45 0,80 300IH36523104/40 32 43 15 45 0,84 320IH36523105/40 35 46 15 45 0,91 350IH36523120/40 38 49 15 45 0,97 380IH36523106/40 40 52 15 45 1,14 400IH36523107/40 45 60 15 45 1,60 450IH36523108/40 50 65 15 45 1,83 500

Working tº: -30 °C ÷ + 80 °C, до 100°C за маслаTolerances:I.D.

O.D.L

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm± 1,59 m± 1%

Hose constructionTube: Black, smooth, NBR rubber compound. Resistant to oil and fuel with an aromatic content not exceeding 50 % Reinforcement: Synthetic textile fabrics and built-in copper wires to provide electrical continuity between both endsCover: Black, smooth, NBR/SBR rubber compound, antistatic (R < 1 MΩ/m), oil, fuel, abrasion, ageing andweather resistant

ApplicationsSuitable for fuel oils, petrol and diesel having an aromatic content not exceeded 50 %.

Page 76: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 75 / 120 Catalog HOSES

CARBURITE 10CARBURITE 16

RMA steel mandrel

NumberID OD WP BP Weight R min

mm mm bar bar kg mm

CARBURITE 10IH36530099/40 19 29 10 30 0,61 120IH36531011/40 22 32 10 30 0,67 130IH36531004/40 25 35 10 30 0,80 150IH36530201/40 30 40 10 30 0,92 180IH36531012/40 32 42 10 30 0,98 190IH36530202/40 35 45 10 30 1,05 210IH36531002/40 38 48 10 30 1,13 240IH36530203/40 40 50 10 30 1,18 240IH36530212/40 42 52 10 30 1,22 252IH36530204/40 45 55 10 30 1,31 270IH36530205/40 50 60 10 30 1,46 300IH36531020/40 51 61 10 30 1,49 300IH36530206/40 60 71 10 30 1,89 360IH36531001/40 63,5 75 10 30 2,09 380IH36530207/20 70 82 10 30 2,47 420IH36530208/20 75 87 10 30 2,68 450IH36530208/40 75 87 10 30 2,68 450IH36530213/20 76 88 10 30 2,72 460IH36530213/40 76 88 10 30 2,72 460IH36530209/20 80 92 10 30 2,84 480IH36531003/20 90 104 10 30 3,64 540IH36530211/20 100 114 10 30 4,02 600IH36530211/40 100 114 10 30 4,02 600IH36531019/20 110 124 10 30 4,29 660IH36531009/20 120 134 10 30 4,65 720IH36531050/10 150 170 10 30 7,27 900

CARBURITE H10IH36531100/40 38 51 10 30 1,40 240IH36531005/40 50 64 10 30 1,93 300IH36531024/20 100 116 10 30 4,41 600

CARBURITE 16IH36532650/40 25 37 16 48 0,91 150IH36532651/40 32 44 16 48 1,14 190IH36532652/40 38 51 16 48 1,44 230IH36532653/40 40 54 16 48 1,57 240IH36532654/40 50 64 16 48 1,92 300IH36532655/40 75 90 16 48 3,03 450IH36532656/40 100 116 16 48 4,45 600IH36532657/40 125 142 16 48 5,63 750IH36532658/15 150 172 16 48 7,80 900IH36532659/12 203 235 16 48 18,45 1400

Working tº: -30 °C ÷ + 80 °C, до 100°C за маслаSuction: Max. 0,8 bar (600 mm Hg)Tolerances:I.D.

L

≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm ± 1%

Hose constructionTube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics and embedded steel wire helix Cover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR rubber compound, oil, fuel, abrasion, ageing and weatherresistant

ApplicationsDesigned for suction and delivery of mineral oils and fuels (with aromatic content not exceeding 50 %) in road and rail tankers, service stations and refineries. For heavy duty applications CARBURITE H is recommended.

CARBURITE 16 TÜV

RMA steel mandrel

Working tº -30 °C ÷ +80 °C (+100 °C for oil)Suction Max. 0,8 bar (600 mm Hg)

TolerancesI.D. ≤ I.D. 38 mm: ± 0,79 mm

> I.D. 38 mm: ± 1,59 mmL ± 1%

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH36532601/40 25 37 16 48 0,91 150IH36532606/40 32 44 16 48 1,14 190IH36532603/40 38 51 16 48 1,44 230IH36532606/40 40 54 16 48 1,57 240IH36532605/40 50 64 16 48 1,92 300IH36532607/40 75 90 16 48 3,03 450IH36532609/20 100 116 16 48 4,45 600IH36532609/40 100 116 16 48 4,45 600

Tube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in copper wires for electrical continuity atboth ends. The copper wire can be taken out when the hose is cut in specific lengths from standard coils to facilitate welding to fittingsCover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR rubber compound, oil, fuel, abrasion, ageing and weatherresistant

ApplicationsDesigned for suction and delivery of mineral oils and fuels with an aromatic content not exceeding 50 %. TÜV approval for the electrical resistance, excluded IH36532617/12 (diameter 203 x 235).

Page 77: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 76 / 120 Catalog HOSES

10.2. Low temperature Applications

CARBURITE F 10

RMA steel mandrel

Working tº -40 °C ÷ +80 °C Suction Max. 0,8 bar (600 mm Hg)

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 25 mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil andfuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR rubber compound, mineral oil, fuel, abrasion, ageing and weather resistant

Suitable for suction and delivery of petroleum productsin road and rail tankers, service stations and refineriesand as a flexible connector in lines handling fuels andoils. Its strong construction and design make it suitablefor heavy duty at low temperatures.

CARBOCORD F 10

RMA steel mandrel

Working tº -40 °C ÷ +80 °C Suction Max. 0,8 bar (600 mm Hg)

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 25 mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil andfuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics and built-in copper wires to provide electrical continuity between both endsCover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR rubber compound, mineral oil, fuel, abrasion, ageing and weather resistant

Suitable for delivery of petroleum products in road andrail tankers, in service stations and refineries and asflexible connector in lines handling fuels and oils. Itsstrong construction and design make it suitable forheavy duty at low temperature services.

10.3. Petrol Pumps

CARBOPRESS® D EN 1360/1 N/L

According to EN 1360:2005 Type 1

Working tº -25 °C ÷ + 55 °C

Tolerances

I.D. ≤ I.D. 19 mm: ± 0,80 mm> I.D. 19 mm: ± 1,25 mm

O.D. ≤ O.D. 31 mm: ± 0,80 mm> O.D. 31 mm: ± 1,25 mm

L. ± 1%

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH30502403/80 15 25 16 48 0,45 75IH30502420/50 16 26 16 48 0,47 80IH30502420/90 16 26 16 48 0,47 80IH30502421/80 18 30 16 48 0,64 90IH30502407/50 19 31 16 48 0,63 95IH30502411/50 21 31 16 48 0,53 105IH36521140/40* 25 37 16 48 0,74 150

Tube: Black, smooth, NBR rubber compound, antistatic (R < 1 MΩ/m)Reinforcement: Synthetic textile yarns providing low dilation. Built-in copper wires to allow electrical continuity between fittingsCover: Black, smooth, non-staining and antistatic (R < 1 MΩ/m) CR rubber compound resistant to abrasion, oil, fuel and weathering

ApplicationsDesigned for dispensing metered quantities of automotive fuels from dispensing equipment (petrol pumps). Resistant to leaded and unleaded petrol (gasoline) with an aromatic content not exceeding 50 %.

Page 78: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 77 / 120 Catalog HOSES

CARBOPRESS® D EN 1360/3

According to EN 1360:2005 Type 3

Working tº -25 °C ÷ + 55 °C

Tolerances I.D. ≤ I.D. 19 mm: ± 0,80 mm

> I.D. 19 mm: ± 1,25 mm

L. ± 1%

Hose constructionTube: Black, smooth, NBR rubber compoundReinforcement: One braid of high tensile steel wire,providing low dilation, electrical continuity between both ends and giving better strength and resistance to crushing and accidental breakage Cover: Black, non-staining and antistatic (R < 1 MΩ/m) CR rubber resistant to abrasion, oil, fuel and weathering

NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH30512902/0 16 26 16 48 0,55 80IH30512906/0 19 32 16 48 0,80 100IH30512909/0 25 38 16 48 0,98 130

ApplicationsDesigned for dispensing metered quantities of automotive fuels from dispensing equipment (petrol pumps). Resistant to fuel oils for oil engines and burners for non marine use, leaded and unleaded petrol (gasoline) for motor vehicles with an aromatic content not exceeding 50 %.

CARBOPRESS® D ARTIC N/L

Съгласно EN 1360 Type 1

Working tº -40 °C ÷ + 55 °C

Tolerances I.D. I.D. 18 mm: ± 0,80 mm

I.D. 25 mm: ± 1,25 mm

O.D. O.D. 30 mm: ± 0,80O.D. 38 mm: ±1,25

L. ± 1%Size 18, 25 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compoundReinforcement: Synthetic textile yarns providing low dilation, built-in copper wires to allow electrical continuity between fittingsCover: Black, smooth, non-staining andantistatic (R<1 MΩ/m) synthetic rubber compound resistant to abrasion, oil, fuel and weathering

Designed for dispensing equipment (petrol pumps) on cold sites. Resistant to leaded and unleaded petrol (gasoline) with an aromatic content not exceeding 50 %.

CARBOPRESS® D RVVapour recovery coaxial hose for fuel dispensers

Working tº -25 °C ÷ + 55 °C

Approval TÜV approval for ITR hose with the most common fuel dispensing systems

Hose construction ApplicationsHose Construction INNER HOSETube: Black, smooth, NBR rubber compound, resistant to leaded and unleaded fuelsReinforcement: One wire braidCover: Black, smooth, NBR rubber compound, resistant to lead and unleaded fuel

Hose Construction EXTERNAL HOSETube: Black, smooth, NBR rubber compound, antistatic (R < 1 MΩ/m)resistant to leaded and unleaded fuelsReinforcement: Synthetic textile yarns with built-in copper wires to assure electricalcontinuity between both ends and the lower volumetric expansionCover: Black, smooth, CR rubber compound, non-staining and antistatic (R<1 MΩ/m)resistant to abrasion, oil, fuel and weathering.

Special system designed with coaxial hoses, suitable for transfer of petroleum base products with aromatic content not exceeding 50 % in all systems that utilize the vapour recovery hose technology. Light, flexible, strong, ideal for all those dispensers that utilise the vapour recovery hose assembly technology (petrol pumps) supplied with special reusable fittings.

Page 79: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 78 / 120 Catalog HOSES

10.4. Tank TruckSuitable for tank trucks are rubber hoses, described in this chapter, and composite hose you can read in chapter “COMPOSITE HOSE”.

CARBOCORD EN 12115

According to EN 12115 meets TRbF 131 Teil 2 par. 5.5 (flame resistance)

Working tº -25 °C ÷ +80 °C

Tolerances

I.D.I.D. 19 - 38 mm: ± 0,50 mmI.D. 50 mm: ± 0,70 mmI.D. 63,5 - 100 mm: ± 0,80

O.D.O.D. 31 - 51 mm: ± 1,00O.D. 66 - 91 mm: ± 1,20O.D. 116 mm: ± 1,60

L. ± 1%

Hose construction NumberID OD WP BP Weight R minMm mm bar bar kg mm

IH36522309/40 19 31 16 64 0,60 125IH36522310/40 25 37 16 64 0,89 150IH36522311/40 32 44 16 64 1,00 175IH36522312/40 38 51 16 64 1,30 225IH36522313/40 50 66 16 64 2,00 275IH36522314/40 63,5 79 16 64 2,40 300IH36522315/40 75 91 16 64 2,80 350IH36522316/40 100 116 12 48 3,80 450

Tube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics, embeddedsteel wire helix and built-in copper wire to facilitate the electrical connection between the hose and the end couplingsCover: Black, smooth, NBR/SBR rubber compound, antistatic (R < 1 MΩ/m), oil, fuel, abrasion, ageing and weather resistant

ApplicationsSuitable for delivery of oil and fuel with an aromaticcontent not exceeding 50 %.

CARBOCORD 18 TÜV

RMA steel mandrel

Working tº -25 °C ÷ +80 °C

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm

> I.D. 38 mm: ± 1,59 mmO.D. ± 1,59 mm

L. ± 1%Size 25mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil andfuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics and built-in copper wires to provide electrical continuity between both endsCover: Black, smooth, antistatic (R < 1 MΩ/m), oil, fuel, abrasion,ageing and weather resistant, NBR/SBR rubber compound

For loading and discharge of petroleum products with aromatic content not exceeding 50 %. It can be used as domestic fuel oil reeling hose. TЬV approval for the electrical resistance.

CARBURITE BS 3492-D

Стандарт BS 3492 Type D

Working tº -30 °C ÷ +80 °C

Tolerances I.D. I.D. 38 - 50 mm: ± 1,50 mm> I.D. 50 mm: ± 2,00 mm

L. ± 1%Suction Max. 0,8 bar (600 mm Hg)Size 38mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 % Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in copper wires for electrical continuity between both endsCover: Black, smooth, antistatic (R < 1 MΩ/m) NBR/SBR rubbercompound, mineral oil, fuel, abrasion, ageing and weather resistant

Especially suitable for loading and unloading ofmineral oil and fuels (with aromatic content notexceeding 50 %) for road and rail tankers.Also used in refineries and in service stations.

Page 80: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 79 / 120 Catalog HOSES

CHEMIOEL EN 12115

In according to EN 12115 meets TRbF 131 Teil 2 par. 5.5 (flame resistance)

Working tº -25°C ÷ +80°C, up to 100°C for oil

Tolerances

I.D.I.D. 19 - 38 mm: ± 0,50 mmI.D. 50 mm: ± 0,70 mmI.D. 63,5 - 100 mm: ± 0,80

O.D.O.D. 31 - 51 mm: ± 1,00O.D. 66 - 91 mm: ± 1,20O.D. 116 mm: ± 1,60

L. ± 1%

Suction ≤ I.D. 63,5 mm: 0,90 bar> I.D. 63,5 mm: 0,80 bar

Size 19mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-incopper wire to facilitate the electrical connection between the hose and the end couplingsCover: Black, smooth, NBR/SBR rubber compound, antistatic (R < 1 MΩ/m), oil, fuel, abrasion, ageing and weather resistant

Designed for suction and delivery of mineral oils and fuels with an aromatic content not exceeding 50 %.

CHEMIOEL 10 EN 12115 OND

In according to EN 12115 meets TRbF 131 Teil 2 par. 5.5

Working tº -25°C ÷ +80°C, до 100°C за масла

Tolerances Acc. 12115

I.D.I.D. 19 - 38 mm: ± 0,50 mmI.D. 50 - 51 mm: ± 0,70 mmI.D. 63,5 - 102 mm: ± 0,80

L. ± 1%Suction ≤ I.D. 63,5 mm: 0,90 bar

Size 19mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-in a copper wire to facilitate the electrical connection between the hose and the end couplingsCover: Black, corrugated, NBR/SBR rubber compound, antistatic (R < 1 MΩ/m),oil, fuel, abrasion, ageing and weather resistant

Specially designed for suction and delivery of mineral oils and fuels with an aromatic content not exceeding 50 %, mud and hydrocarbons for trucks when a lightweight and flexible hose is required.

RAGUSA 4

RMA steel mandrel

Working tº -25°C ÷ +80°C, up to 100°C for oil

Tolerances I.D. ± 1,59 mmL. ± 1%

Suction Max. 0,8 bar (600 mm Hg)Size 38 mm ÷ 100 mm

Hose construction ApplicationsTube: Black, smooth, NBR rubber compound, resistant to oil and fuel with an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics, embedded steel wire helix and built-incopper wire for electrical continuity at both endsCover: Black: oil, fuel, abrasion and weather resistant, antistatic (R < 1 MΩ/m) corrugated NBR/SBR rubber compound. Generally manufactured with soft cuffed ends and supplied in lengths required

Suitable for suction and delivery of mineral oils and fuels having an aromatic content not exceeding 50 %, when a lightweight and flexible hose is required.

Page 81: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 80 / 120 Catalog HOSES

CARBUREXWorking tº -20 °C ÷ +60 °C

Tolerances I.D. ≤ I.D. 50 mm: ± 0,50 mm

> I.D. 50 mm: ± 1,00 mmL. ± 1%Wall thickness ± 0,50 mm

All other technical data are subject to a ± 5 % tolerance.

Suction ≤ I.D. 50 mm: 0,80 bar (600 mm Hg)> I.D. 50 mm: 0,70 bar (530 mm Hg)

Size 25 mm ÷ 100 mm

Hose construction ApplicationsFlexible hose having a beige, rigid spiral embedded in a blue PVC wall.

For suction and delivery of petroleum products, diesel and fuels oils. It is particularly suitable for transferring domestic fuel oil from tank-trucks to storage tanks.

CARBUREX/ANCWorking tº -20 °C ÷ +60 °C

Tolerances I.D. ≤ I.D. 50 mm: ± 0,50 mm

> I.D. 50 mm: ± 1,00 mmL. ± 1%Wall thickness ± 0,50 mm

All other technical data are subject to a ± 5 % tolerance.Suction 0,9 bar (660 mm HG)Size 40mm, 50mm, 80mm, 100mm

Hose construction ApplicationsFlexible hose having a beige, rigid double spiral sidedembedded in a blue PVC wall, with an embedded copper braid giving electrical continuity at both ends.

For suction and delivery of petroleum products, diesel and fuels oils. It is particularly suitable for transferring domestic fuel oil from tank-trucks to storage tanks.

10.5. ЗА LРG Bigger sizes of LPG hoses, such as LPG bunkering, you can find in chapter “CRIOGENIC HOSE”.

GASTRUCK EN 1762 D-M

According to ITR specification exceeds EN 1762

Working tº -30 °C ÷ + 55 °C

Tolerances I.D. ≤ I.D. 38 mm: ± 0,50 mm

> I.D. 38 mm: ± 0,60 mm

O.D. ≤ O.D. 52 mm: ± 1,00 mm> O.D. 52 mm: ± 1,20 mm

L ± 1%Vacuum ≤ I.D. 51 mm: 0,80 bar (600 mm Hg)

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH30515070/40 10 19 25 100 0,30 60IH30515071/40 13 23 25 100 0,40 80IH30515072/40 16 26 25 100 0,47 100IH36520580/40 19 31 25 100 0,61 160IH36520581/40 25 38 25 100 0,83 200IH36520582/40 32 45 25 100 1,00 250IH36520583/40 38 52 25 100 1,27 320IH36520584/40 50 66 25 100 1,84 400IH36520585/40 51 67 25 100 1,87 400IH36520586/40 63,5 80 25 100 2,25 550IH36520587/40 75 93 25 100 3,00 650

Tube: Low diffusion rate NBR rubber compound of uniform thicknessReinforcement: Synthetic textile fabrics, embedded built-in copper wire to facilitate the electrical connection between thehose and the end couplingsCover: Black, smooth, antistatic (R < 1 MΩ/m), abrasion, oil, fuel and weather resistant NBR/SBR rubber compound. Pin-pricked to prevent the formation of blisters

ApplicationsLiquid gas application (methane, propane, LPG) loading of tankers. According to EN 1762 (hoses and hose assemblies for LPG and natural gas)

Page 82: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 81 / 120 Catalog HOSES

ROBUR GPLWorking tº -30 °C ÷ +70 °C

Tolerances L: ± 1%

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmIH36520560/0 6,5 16,6 25 1380 0,43 60IH36520561/0 8 17,7 25 1180 0,45 70IH36520562/0 9,5 20,2 25 1100 0,56 80IH36520563/0 13 23,2 25 960 0,68 90IH36520564/0 16 26,5 25 760 0,80 95IH36520565/0 19 30,5 25 620 1,03 100IH36520566/0 25 38,5 25 560 1,41 150IH36520567/0 32 45,6 25 440 1,82 200IH36520568/0 38 52 25 340 2,00 280IH36520569/0 51 66,5 25 320 2,86 350

Tube: Low diffusion rate seamless extruded NBR rubber compound of uniform thickness.Reinforcement: Two braids of high tensile steel wireCover: Black, SBR/CR rubber compound pin-pricked to prevent the formation of blisters, resistant to abrasion, oils, ozone and weatheringApplicationsLiquid gas applications (methane, propane, LPG) in the loading and unloading of tankers and in the service stations.

LPG

Meets 1762 – LPG hoses

Working tºC -40 °C ÷ +70 °C Suction 0,2 bar at ID<75

Hose constructionTube: Nitrile rubber (NBR), black, seamlessly extruded, electrically conductive, diffusion resistantReinforcement: 2 textile braids/2 crossed tinned copper strands Cover: Chloroprene (CR), black, perforated, electrically conductive, flame and abrasion resistant, ozone - UV and ageing resistant.

Applications NumberID OD WP BP Weight R min

mm mm bar bar kg mmLPG010 10 19 25 100 0,3 70LPG013 13 23 25 100 0,4 85LPG019 19 31 25 100 0,6 100LPG025 25 38 25 100 0,8 150LPG032 32 45 25 100 1,0 175LPG038 38 52 25 100 1,2 200LPG050 50 66 25 100 2,0 250LPG075 75 93 25 100 3,4 450LPG100 100 118 25 100 4,3 750

As reel hose for supplies to domestic and industrial storage tanks, aspump hose for vehicle refuelling, for bulk loading and unloading from rail tankers, road tankers and ships.For special suction / pressure operation needs the type LPGS with stainless steel helix is available on request.Not suitable for ammonia!

10.6. Aircraft Groung Refueling

JETCORD B EN 1361JETCORD C EN 1361

Working tº -40 °C ÷ +70 °C

Tolerances I.D.≤ I.D. 38 mm: ± 0,80 mmI.D. 50 - 75 mm: ± 1,20 mmI.D. 76 mm: ± 1,60 mm

L. ± 1%Certifications A test certificate for each hose can be supplied on request.

NumberID OD WP BP Weight R min

mm mm bar bar kg mm

JETCORD B EN 1361IH36522850/0 25 39 20 80 0,93 150IH36522851/0 32 46 20 80 1,12 187IH36522852/0 38 52 20 80 1,31 225IH36522853/0 50 67 20 80 2,04 275IH36522854/0 63,5 80 20 80 2,50 300IH36522856/0 75 92 20 80 2,90 300IH36522855/0 100 122 20 80 5,02 450

JETCORD B EN 1361IH36522897/0 25 39 20 80 0,90 150IH36522898/0 32 46 20 80 1,10 187IH36522899/0 38 52 20 80 1,28 225IH36522900/0 50 67 20 80 2,01 275IH36522901/0 63,5 80 20 80 2,47 300IH36522902/0 75 92 20 80 2,87 300IH36522904/0 76 93 20 80 2,90 300IH36522903/0 100 122 20 80 5,00 450

Hose constructionTube: Black, smooth, NBR rubber compound, resistant to aviationgasoline and jet fuels having an arom. content not exceeding 50 %Reinforcement: Synthetic textile fabrics, with built-in copper wire to ensure the electrical continuity Cover: Black, CR rubber compound, resistant to mineral oil, fuels,abrasion, ozone and weatheringApplicationsDesigned for the ground refuelling of aircraft.

Page 83: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 82 / 120 Catalog HOSES

JETCORD E EN 1361JETCORD F EN 1361

Съгласно EN 1361

Working tº -40 °C ÷ +70 °C

Tolerances I.D.≤ I.D. 38 mm: ± 0,80 mmI.D. 50 - 75 mm: ± 1,20 mmI.D. 100 mm: ± 1,60 mm

L. ± 1%Certifications A test certificate for each hose can be supplied on request.Suction Max. 0,85 bar (646 mm Hg)

NumberID OD WP BP Weigh

t R min

mm mm bar bar kg mm

JETCORD E EN 1361IH36522940/0 25 40 20 80 1,15 150IH36522941/0 32 46 20 80 1,31 187IH36522942/0 38 54 20 80 1,76 225IH36522943/0 50 67 20 80 2,36 275IH36522945/0 63,5 82 20 80 3,29 300IH36522944/0 75 94 20 80 3,83 300IH36522946/0 100 122 20 80 5,96 450

JETCORD F EN 1361IH36522926/0 25 41 20 80 1,26 150IH36522927/0 32 52 20 80 1,67 187IH36522928/0 38 58 20 80 1,90 225IH36522929/0 50 70 20 80 2,45 275IH36522930/0 63,5 83,5 20 80 3,03 300IH36522931/0 75 98 20 80 3,98 300IH36522932/0 100 127 20 80 6,07 450

Hose constructionTube: Black, smooth, NBR rubber compound, resistant to aviation gasoline and jet fuels having an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabrics and embedded wire helixCover: Black, CR rubber compound, resistant to mineral oil, fuels, abrasion, ozone and weathering

ApplicationsDesigned for use in all operations associated with the ground refuelling and fuel discharging of aircraft with enhanced defuelling capability, electrically conducting and incorporating a wire helix reinforcement., inaccording to EN 1361 type E and F.

JETCORD XT/C

API 1529 Type C – Grade 2

Working tº -40 °C ÷ +70 °C

Tolerances I.D.≤ I.D. 38 mm: ± 0,80 mmI.D. 50 - 75 mm: ± 1,20 mmI.D. 100 mm: ± 1,60 mm

L. ± 1%Certifications A test certificate for each hose can be supplied on request.

Hose constructionNumber ID OD WP BP Weight R min

mm mm bar bar kg mmIH36522802/0 25 38,5 20 80 0,90 125IH36522801/0 32 45,5 20 80 1,09 160IH36522803/0 38 51,5 20 80 1,28 190IH36522434/0 50 67 20 80 2,02 250IH36522435/0 63,5 80 20 80 2,48 310IH36522804/0 75 92 20 80 2,88 375IH36522800/0 100 122 20 80 5,01 500

Tube: Black, smooth, NBR rubber compound, resistant to aviation fuels having an aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabricsCover: Black, antistatic (103<R<106Ω/m), CR rubber compound, resistant to mineral oil, fuels, abrasion, ozone and weathering

ApplicationsDesigned for use in all operations associated with the ground refuelling in according to API 1529 Type C – Grade 2

HDCWorking tº C -30 °C ÷ +70 °C Suction 0,2 bar at ID<75Burst pressure >80 bar

Standarts Meets EN 1361 type C (BS 3158), API 1529 C, NFPA407,AS 2683 and TRbF 131. Approved acc. German military standard VG95 955.

Hose construction NumberID OD WP TP Weight R min

mm mm bar bar kg mmHD019C 19 31 20 40 0,6 200HD025C 25 37 20 40 0,8 200HD032C 32 44 20 40 1,0 225HD038C 38 51 20 40 1,2 270HD050C 50 66 20 40 1,9 400HD063C 63 79 20 40 2,4 600HD075C 75 91 20 40 2,8 600HD100C 100 116 20 40 3,7 900

Tube: Nitrile rubber (NBR), antistatic, no fuel solubilityReinforcement: Textile braids without metallic strands Cover: Chloroprene (CR), electrically conductive, ozone and flame resistant, highly abrasion resistant

Applicationsaircraft refuelling hoses, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils

Page 84: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 83 / 120 Catalog HOSES

PHDFWorking tº C -30 °C ÷ +70 °C Suction 0,2 bar при ID<75Burst pressure >80 bar

Standarts Meets EN 1361 type F (BS 3158), API 1529 F NFPA407, AS 2683 and TRbF 131. Approved acc. German military standard VG95 955.

Hose construction NumberID OD WP TP Weight R min

mm mm bar bar kg mmFHD038F 38 54 20 40 1,5 400FHD050F 50 67 20 40 2,1 500FHD063F 63 81 20 40 2,9 550 FHD075F 75 93 20 40 3,6 600

Tube: Nitrile rubber (NBR), antistatic, no fuel solubilityУсилване : non metallic semihard polyamide helixCover: Chloroprene (CR), electrically conductive, ozoneand flame resistant, highly abrasion resistant

ApplicationsFor alternative fuelling and defuelling operation. Up to size 21/2" the diameter remains stable even with low bending radii.

TWEWorking tº C -30 °C ÷ +70 °C Suction 0,2 bar при ID<75Burst pressure >80 bar

СтандартиMeets EN 1361 type E (BS 3158), API 1529 E NFPA407, AS 2683 and TRbF 131. Approved acc. German military standard VG95 955.

Hose construction NumberID OD WP TP Weight R min

mm mm bar bar kg mmTW038E 38 51 20 40 1,4 400TW050E 50 66 20 40 2,1 500TW063E 63 79 20 40 2,8 550TW075E 75 91 20 40 3,3 600TW100E 100 116 20 40 4,7 900

Tube: Nitrile rubber (NBR), antistatic, no fuel solubilityУсилване : steel helixCover: Chloroprene (CR), electrically conductive, ozoneand flame resistant, highly abrasion resistant

ApplicationsFor alternative fuelling and defuelling operation. Up to size 21/2" the diameter remains stable even with low bending radius.

10.7. Bitumen

HOTBITUM 10

Acc. to EN 13482 и TRbF 131 part 2

Working tº -25 °C ÷ +200 °CSuction 0,4 bar

Tolerances I.D. I.D. 50 - 75 mm: ± 1,20 mmI.D. 100 mm: ± 1,60 mm

L. ± 1%Certifications A test certificate for each hose can be supplied on

request.

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mmHB50 50 65 7 15 2,3 160HB63 63 78 7 15 2,9 200HB75 75 91 7 15 3,5 250HB100 100 119 7 15 5,2 350

Tube and Cover: NBR, seamless, antistaticReinforcement: Two textile braids with tinned copper strands andembedded steel helix, zinc plated.

ApplicationsSuitable for bitumen and all petroleum based products as the yellow band type TW. Not suitable for lignite-tar oil and coal-tar oils. Meets EN 13 482.

Page 85: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 84 / 120 Catalog HOSES

10.8. Bunkering hose

BUNKER SBL BUNKER SBS

Working tº -35 °C ÷ +90 °C Suction 0,4 bar

Tolerances I.D. I.D. 50 - 75 mm: ± 1,20 mm I.D. 100 mm: ± 1,60 mm

L. ± 1% Certifications A test certificate for each hose can be supplied on

request.

Hose ends Hose tail with swivelling flange acc. to EN 1092-1 of carbon steel. Hose flanges also available according to other flange standards, i.e. PN 6, PN 25, ASA 150 Ibs., ASA 300 Ibs.

Hose construction Tube : NBR black, antistatic, no fuel-solubility Reinforcements : multiple low tensile textile braids, standard type SBS with galvanized steel helices Cover : Chloroprene (CR), black, smooth, el. conductive

Applications For bulk loading and unloading of bunkering ships and tankers, for petroleum based products up to 50% aromatic content.

Type SBL is a light weight and very flexible collabsible hose w i t h o u t helix for pressure service. Corresponds to category L 10 of EN 1765. - Suitable for manual handling, very flexible. The reinforcement is constructed in such a way that the hose keeps its whole diameter even with 1 bar flow pressure. Type SBL is n o t suitable for gravity discharge and for suction. - Please avoid permanent kinking.

Type SBS is the heavy standard bunkering hose with two steel helices for suction and discharge. Corresponds to EN 1765 category S 15. Recommended for crane operated dockside loading and unloading in harbours and refineries. Very robust and kink resistant. - Electrically conductive due to metallic connection of steel helix with the hose tail. On request, type SBL is available in a non-electrically conductive version.

Number ID OD Working pressure

Burst pressure Weight Bend radius

BUNKER SBL SBL100 100 118 10 15 4,0 600 SBL150 150 168 10 15 5,6 900 SBL200 200 222 10 15 9,1 1200 SBL250 250 274 10 15 15,0 1500 BUNKER SBS SBS150 150 181 15 23 14,5 2000 SBS200 200 231 15 23 18,8 2800 SBS250 250 285 15 23 26,6 3500

SBS300 300 340 15 23 33,7 4300

Page 86: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 85 / 120 Catalog HOSES

FHDWorking tº -20 °C ÷ +100 °CSuction Not for suctionStandarts According to German military standart VG 95 955

Applications

Type FHD is a collapsible hose preferably used by naval forces. lt can be reeled up flat, takes few place to stow away and is easy to handle. Used as pressure hose for all petroleum based products with an aromatic content up to 50 %, on bunkering ships, tankers as well as "flexiblepipeline". Suitable for naval mobile supply and for offshore facilities.

Hose construction

Tube: NBR black, antistatic, no fuel-solubilityReinforcement: Two low tensile textile braidsCover: Chloroprene (CR), black, electr. conductive.

Number/Max. len ID OD WP BP Weight

FHD75/40 75 89 16 50 2,9FHD100/40 100 116 16 50 3,8FHD125/30 125 143 16 50 4,8FHD150/30 150 170 16 50 5,8FHD200/30 200 222 16 50 8,8

STWWorking tº -20 °C ÷ +100 °CSuction 0,8 barStandarts According to German military standart VG 95 955

Applications

Type STW is a suction and discharge hose for naval tanker vessels, also suitable for gravity discharge because the helix helps to keep the diameter round. - As light bunker hose for all petroleum based products with an aromatic content up to 50%, on bunkering ships, tankers and other ships. - Ideal also as flexible duct for floating bridges to compensate for level differences.

Hose construction

Tube: NBR black, antistatic, no fuel-solubilityReinforcement: Two textile braids (STW 200 Nylon Cord) and galvanised steel helixCover: Chloroprene (CR), black, electr. conductive.

Number/Max. len

ID OD WP BP Weight R minmm mm bar bar kg mm

STW63/40 63 79 16 80 2,8 160STW75/40 75 90 16 80 3,3 180STW100/40 100 117 16 80 4,8 275STW125/30 125 145 16 80 7,6 350STW150/30 150 172 16 80 9,7 500STW200/20 200 225 16 80 14,9 1000

Page 87: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 86 / 120 Catalog HOSES

10.9. Composite hose

GASSOFLEX GGE 7GASSOFLEX GGE 10GASSOFLEX GGE 14

Working tº -20 °C ÷ +100 °C

Working pressure

GASSOFLEX GGE 7 – 7barGASSOFLEX GGE 10 – 10 barGASSOFLEX GGE 14 – 14 bar

Suction 0,8 barSertification On request for each hose

Hose construction NumberID OD WP BP Weight R min

mm mm bar bar kg mm

GASSOFLEX GGE 7GGE0720 50 - 7 35 1,81 180GGE0730 75 - 7 35 3,06 270GGE0740 100 - 7 35 5,35 305

GASSOFLEX GGE 10GGE1010 25 - 10 50 0,75 68GGE1012 32 - 10 50 0,97 74GGE1015 38 - 10 50 1,30 105GGE1020 50 - 10 50 2,01 190GGE1025 63 - 10 50 2,90 225GGE1030 75 - 10 50 3,40 290GGE1040 100 - 10 50 5,95 320

GASSOFLEX GGE 14GGE1410 25 - 14 70 0,75 68GGE1412 32 - 14 70 0,97 74GGE1415 38 - 14 70 1,30 105GGE1420 50 - 14 70 2,01 190GGE1425 63 - 14 70 2,90 225GGE1430 75 - 14 70 3,40 290GGE1440 100 - 14 70 5,95 320

Internal metallic helix: Galvanized steel (G)External metallic helix: Galvanized steel (G)Inner leyer. Polypropylen (E). Leyers. Polypropylen.

ApplicationsGassofl ex GGE is recommended for use in delivery and/or suction of fuels, oils and lubricants in cistern trucks, railcars or fi xed deposits.

GASSOFLEX AAE 10GASSOFLEX AAE 14

Working tº -20 °C ÷ +100 °CWorking pressure

GASSOFLEX AAE 10 – 10 barGASSOFLEX AAE 14 – 14 bar

Suction 0,8 barSertification On request for each hose

Hose construction NumberID OD WP BP Weight R мин

mm mm bar bar kg mm

GASSOFLEX AAE 10AAE1010 25 - 10 50 0,37 51AAE1012 32 - 10 50 0,48 55AAE1015 38 - 10 50 0,65 78AAE1020 50 - 10 50 1,00 142AAE1025 63 - 10 50 1,45 170AAE1030 75 - 10 50 1,70 218AAE1040 100 - 10 50 2,97 240

GASSOFLEX AAE 14AAE1410 25 - 14 70 0,37 51AAE1412 32 - 14 70 0,48 55AAE1415 38 - 14 70 0,65 78AAE1420 50 - 14 70 1,00 142AAE1425 63 - 14 70 1,45 170AAE1430 75 - 14 70 1,70 218AAE1440 100 - 14 70 2,97 240

Internal metallic helix: Aluminium (A)External metallic helix: Aluminium (A)Inner leyer. Polypropylen (E). Leyers. Polypropylen.

ApplicationsGassofl ex AAE is recommended for the delivery and/or suction of fuels, oils and lubricants in cistern trucks, railcars or fi xed deposits. However, due to its aluminium wire spiral it is signifi cantly lighter and easier to handle especially in large diameters.

Page 88: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 87 / 120 Catalog HOSES

XI. AUTOMOTIVE AND BOAT HOSESThis wide range of hoses offers a multiplicity of applications in

cooling and airbrake systems, fuel supply and boat exhaust gas and refuelling. They are specially designed for air brakes, unleaded petrol in car engines, gear box lubricants, LPG engines, small boat inboard engines and pumps. They fulfil international standards such as DIN 74310, SAE J 200, SAE J 30 R7, EN ISO 7840.

11.1. Automotive Cooling System

RADIOR 10tº range -30 °C to + 100 °C with peaks +120 °C

Tolerances I.D. ± 0,80 mmL. ± 1%

According to UNI EN ISO 1307/97Size 7mm, 15mm

Hose construction ApplicationsTube: Black, smooth EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Smooth, black, heat, ageing and weather-resistant EPDM nitrosamine free rubber compound

Flexible rubber hose for delivery of hot water in heating and cooling of automotive LPG and methane systems.

RADIOR 3 tº range -40 °C (-40 °F) to peaks of +100 °C (+212 °F)

TolerancesI.D. ≤ I.D. 38 mm: ± 0,79 mm

> I.D. 38 mm: ± 1,59 mm

O.D. ≤ I.D. 22 mm: ± 0,79 mm> I.D. 22 mm: ± 1,59 mm

According to UNI EN ISO 1307/97Size 10mm ÷ 110mm

Hose construction ApplicationsTube: Black, smooth, heat resistant EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarn fabric Cover: Black, smooth, heat, ageing and weather-resistant EPDM nitrosamine free rubber compound

Designed for cooling systems of automotive engines and stationary engines.

11.2. Automotive Air Brake System

AIRBRAKE DIN 74310

According to DIN 74310

tº range -40°C ÷ +70°C

Tolerancesaccording toDIN 74310

I.D. ≤ I.D. 9 mm: ± 0,50 mm> I.D. 9 mm: ± 0,60 mm

L ± 0.5%On wall thickness ± 0,50 mm

Fittings We recommend using fittings that comply with DIN 74304 and to DIN 74325 and clamps with DIN 3017.

Hose constructionНомер

ID OD WP BP Тегло R minmm mm bar bar kg mm

IH30315105/40 7 14 10 40 0,16 55IH30315103/40 9 16 10 40 0,19 65IH30315116/40 11 18 10 40 0,22 70IH30315115/40 13 25 10 40 0,49 100IH30315102/80 15 25 10 40 0,44 115

Tube: Black, smooth EPDM nitrosamine free rubber compoundReinforcement: Stress-resistant, synthetic textile yarnsCover: Black, abrasion, ageing and weather-resistant, smooth EPDM nitrosamine free rubber compound

ApplicationsWidely used in automotive air brake systems.

Page 89: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 88 / 120 Catalog HOSES

AIRBRAKE SAE J 1402-A

According to SAE J 1402-A

tº range -40°C ÷ +93°C

Tolerancesaccording toSAE J1402 – TABLE A

I.D. ≤ I.D. 9,5 mm: ± 0,60> I.D. 11,1 -15,9 mm: ± 0,80

O.D. ≤ O.D.19 mm: + 0,80 / -0,70> O.D. 20,6 - 27 mm: ± 0,80

L ± 1%

Hose constructionНомер

ID OD WP BP Тегло R minmm mm bar bar kg mm

IH30315117/40 9,5 19,0 20 62,1 0,30 89IH30315118/40 11,1 20,6 20 62,1 0,34 102IH30315119/40 12,7 22,2 20 62,1 0,37 102IH30315122/40 14,5 24,5 20 62,1 0,43 131IH30315121/40 15,9 27,0 20 62,1 0,53 114

Tube: Black, smooth, NBR/SBR rubber compoundReinforcement: Synthetic textile yarns Cover: Black, smooth, abrasion, ageing and weather-resistant CR rubber compound

ApplicationsWidely used in automotive air brake systems.

11.3. Automotive Fuel Supply

CARBOPRESS SAE J 200 N/Ltº range -25°C ÷ +120°C

TolerancesI.D. ± 0,50 O.D. ± 0,60 L ± 5%

Size 4mm, 6mm, 7mm, 7.5mm, 10mm

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m), NBR rubber compound, resistant to oils, fuels and unleaded petrol, rubber according to SAE J 200 7BG 810 EF11 EF21Reinforcement: Synthetic textile yarns Cover: Black, smooth, antistatic (R < 1 MΩ/m), NBR/PVC rubber compound resistant to oils, abrasion and weathering

Hose for lead and unleaded fuels in car andmotorbike engines and gearbox lubricants.Hose meets the permeability limits of American Standard SAE 30 R6, SAE30 R7, SAE 30 R8.

Note Continuous working at 10 bar and +120 °C (+248 °F) will considerably decrease hose life.

CARBOPRESS SAE J 30 R7 N/Ltº range -40°C ÷ +125°C

Tolerances поSAE J 30 R7

I.D. ≤ 9,5 mm: ± 0,4> 9,5 mm: ± 0,6

O.D. ≤ 15,9 mm: ± 0,6> 15,9 mm: ± 0,8

L ± 1% Size 4, 4.8мм, 6.4мм, 8.0мм, 9.5мм, 12.7мм

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m) NBR rubber compound, resistant to oils, fuels and unleaded petrol with aromatic content not exceeding 50 %Reinforcement: Synthetic textile yarnsCover: Black, smooth, antistatic (R < 1 MΩ/m) CR rubber compound resistant to oils, abrasion, weather and fire

Low permeability, fire resistant hose, for lead andunleaded fuels in car and motorbike engines andgearbox lubricants where high performance andcompliance to standards are important issue. Hose meets the American Standard SAE J30 R7

Page 90: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 89 / 120 Catalog HOSES

TBSEtº range -30°C ÷ +100°C

Tolerances поUNI EN ISO 1307/97

I.D. ≤ 5 mm: ± 0,6> 5 mm: ± 0,8

L ± 1% Size 4мм, 5мм, 6мм, 7мм, 7.5мм, 10мм

Hose construction ApplicationsTube: Black, oil and fuel resistant, smooth, antistatic (R < 1 MΩ/m), NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, oil, fuel, abrasion, weatherresistant, smooth, antistatic(R < 1 MΩ/m), NBR/EPDM rubber compound

Desigend for general applications in fuel systems where low permeability levels are required. Suitable for leaded and unleaded fuels and diesel.

TBEtº range -20°C ÷ +90°C

Tolerances I.D. +0 / -0.5mmL ± 1%

Size 3мм, 7.5мм

Hose construction ApplicationsTube: Black, oil and fuel resistant, smooth NBR rubber compoundReinforcement:Cover: High tensile polyester textile overbraid, resistant to abrasion,fuel, oil and weathering

Designed for particular applications in fuel systemswhere textile cover is requested.Suitable for leaded and unleaded fuels and diesel.

TG 100

According to FIAT A1/TGB/FA

tº range -35°C ÷ +125°C

TolerancesI.D. ± 0,3 mmO.D. ± 0,3 mmL ± 1%

Size 3мм

Hose construction ApplicationsBlack, smooth hose in NBR rubber compound without reinforcement, moderate permeability, resistants to hydrocarbons, ozone, and ageing agents..

Design for feed systems with hydrocarbons, inparticular for the return of fuel and oil equipment.

AUTOGAS ECE 67/110 CLASS 2

По ECE 67 и ECE 110 Class 2

tº range -30°C ÷ +125°CTolerances according toUNI EN ISO 1307/97

I.D. 4 mm: ± 0,606 - 20 mm: ± 0,80

L ± 1%Size 4мм ÷ 20мм

Hose construction ApplicationsTube: Black, smooth, insulating (R > 1 MΩ/m), LPG and methane permeation resistant NBR rubber compound Reinforcement: Synthetic textile yarnsCover: Black, smooth, insulating (R > 1 MΩ/m), CSM rubber compound resistant to ageing, heat, abrasion, ozone and weathering

Low pressure hoses, designed according to regulation ECE 67, 01, Annex 8, Class 2 and ECE 110, 02, Annex 4b, Class 2.Suitable for low pressure delivery of LPG and methane CNG alternative fuel kits.P.S. This hose exceeds the requirements of DIN 4815 Teil 4 (Hose for fuel gas installation in vehicles) – 0,1.

Page 91: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 90 / 120 Catalog HOSES

FLEXIREX/Ntº range -15°C ÷ +60°C

TolerancesI.D. ± 4% Дебелина ± 0,50 mmL ± 1%

All other technical data are subject to a ± 5 % tolerance.Size 30мм

Hose construction ApplicationsFlexible hose having an off-white, rigid PVC spiralembedded in a black, flexible PVC wall. Externallycorrugated, smooth inner surface.

For air scoop and conveying air, on LPG/CNG kit.It is also suitable for air-dusts, air-conditioning units andcentralized suction equipment.

11.4. Boat Fuel Supply

CARBOPRESS EN ISO 7840 A1

According to EN ISO 7840 A1 D. M. 48

tº range -20°C ÷ +100°CTolerancesaccording toEN ISO 7840

I.D. ≤ 6 - 19 mm: ± 0,75> 25 mm: ± 1,25

L ± 1%Size 6мм ÷ 25мм

Hose construction ApplicationsTube: Black,smooth, antistatic (R < 1 MΩ/m), oil and fuel resistant NBR rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth, antistatic (R < 1 MΩ/m), CR rubber compound resistant to abrasion, oil, fuel, weather and fire resistant

Fire resistant fuel hose suitable for loading diesel, leaded and unleaded fuels with an aromatic content not exceeding 50 %, for small craft of - 24 m length of hull with permanently installed inboard engines.According to EN ISO 7840 type A1 (permeability - 4 g/m2 hour) and exceeding the requirement of type A2 (permeability - 12 g/m2 hour). Complies with the essential requirements given in theEuropean Directive for small craft 94/25/EC.

Type Approval Certificate The European Directive 94/25/CE, according to EN ISO 7840 A1 (fire resistant fuel hoses), is certified by RINA for the use of CE brand and by Lloyd‘s Register for Type Approval. On Board Installation & Maintenance Requirements End connections shall be provided in accordance with theapplicable requirements stated.

CARBOCORD EN ISO 7840 A1

According to EN ISO 7840 A1

tº range -20°C ÷ +100°CTolerancesAccording toEN ISO 7840

I.D. ± 1,5 мм

L ± 1%

Size 32мм ÷ 100мм

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m), oil and fuel resistant NBR rubber compound Reinforcement: Synthetic textile yarnsCover: Black, smooth, antistatic (R < 1 MΩ/m),NBR/SBR rubber compound resistant to abrasion, oil, fuel, weather and fire

Fire resistant fuel hose suitable for loading diesel, leaded and unleaded fuels with an aromatic content not exceeding 50 %, for small craft of - 24 m length of hull with permanently installed inboard engines.According to EN ISO 7840 type A1 (permeability - 4 g/m2 hour) and exceeding the requirement of type A2 (permeability - 12 g/m2 hour).Complies with the essential requirements given in the European Directive for small craft 94/25/EC.

Type Approval Certificate The European Directive 94/25/CE, according to EN ISO 7840 A1 (fire resistant fuel hoses), is certified by RINA for the use of CE brand and by Lloyd‘s Register for Type Approval.

On Board Installation & Maintenance Requirements End connections shall be provided in accordance withthe applicable requirements stated.

Page 92: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 91 / 120 Catalog HOSES

CARBURITE EN ISO 7840 A1

According to EN ISO 7840 A1

tº range -20°C ÷ +100°C

Tolerancesaccording toEN ISO 7840

I.D.19мм: ± 0,75 мм25мм: ± 1,25 мм> 25мм: ± 1,5 мм

L ± 1%Size 19мм ÷ 60мм

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m), oil and fuel resistant NBR rubber compound Reinforcement: Synthetic textile yarns andembedded steel wire helixCover: Black, smooth, antistatic (R < 1 MΩ/m),NBR/SBR rubber compound resistant to abrasion,oil, fuel, weather and fire

Fire resistant fuel hose suitable for loading diesel, leaded and unleaded fuels with an aromatic content not exceeding 50 %, for small craft of - 24 m length of hull with permanently installed inboard engines.According to EN ISO 7840 type A1 (permeability - 4 g/m2 hour) and exceeding the requirement of type A2 (permeability - 12 g/m2 hour).Complies with the essential requirements given in the European Directive for small craft 94/25/EC.

Type Approval Certificate The European Directive 94/25/CE, according to EN ISO 7840 A1 (fire resistant fuel hoses), is certified by RINA for the use of CE brand and by Lloyd‘s Register for Type Approval.

On Board Installation & Maintenance Requirements End connections shall be provided in accordance with the applicable requirements stated.

11.5. Boat Exhaust Gas and Refuelling

SM / TR 311Manufactured according to Nordic Boat Standard 1990 MC-8 and MC-9, EN ISO 7840 class A1 and meets European Directive 94/25/EC EN ISO 13363

tº range -30°C ÷ +100°C

Tolerances I.D.≤ I.D: 38 mm: ± 0,79 mmI.D. 40 - 60 mm: ± 1,50 mm≥ I.D. 63,5 mm: ± 2,00 mm

L ± 1%Suction 0,80 bar ( 600 mm Hg)Size 19мм ÷ 125мм

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m), NBR rubber compound, resistant to exhaust gas, sea water, oil and fuel having an aromatic content not exceeding 50 % Reinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Black, smooth, antistatic (R < 1 MΩ/m), NBR/SBR rubber compound,resistant to flame, heat, oil and fuel, abrasion, ageing and weathering

Designed and approved for use in water cooling exhaust gas systems and also as fire resistant fuel hosefor craft. Suitable for general loading and unloading oils and fuel service.

Type Approval Certificate RINA approval for he use of the CE symbol and Lloyd’s Register Type Approval.

Assembly For correct hose assembly, use high quality fittings only and follow carefully the recommendations of the fitting manufacturer.

Page 93: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 92 / 120 Catalog HOSES

SM / TR 311 ONDManufactured according to Nordic Boat Standard 1990 MC-8 and MC-9, EN ISO 7840 class A1 and meets European Directive 94/25/EC EN ISO 13363

tº range -30°C ÷ +100°C

Tolerances I.D. ≤ 38мм: ± 0,79 мм> 38мм: ± 1,50 мм

L ± 1%Suction 0,80 bar ( 600 mm Hg)Size 19мм ÷ 125мм

Hose construction ApplicationsTube: Black, smooth, antistatic (R < 1 MΩ/m), NBR rubber compound, resistant to exhaust gas, sea water, oil and fuel having an aromatic contentnot exceeding 50 % Reinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Corrugated, black, antistatic (R < 1 MΩ/m), NBR/SBR rubbercompound, resistant to flame, heat, oil and fuel, abrasion, ageing and weathering

Designed and approved for use in water coolingexhaust gas systems and also as fire resistantfuel hose for craft, where highly flexible hoses are required. Suitable for general loading and unloading oils and fuel service.

Type Approval Certificate RINA approval for he use of the CE symbol and Lloyd’s Register Type Approval.

Assembly For correct hose assembly, use high quality fittings only and follow carefully the recommendations of the fittingmanufacturer.

11.6. Boat Sanitary

VARIO NW 3tº range -40°C ÷ +100°CTolerancesRMA steel mandrel

I.D. ± 0,79 ммL ± 1%

Suction 0,80 bar ( 600 mm Hg)Size 19мм, 25мм, 38мм

Hose construction ApplicationsTube: Black, antistatic (R < 1 MΩ/m), smooth EPDM nitrosamine free rubber compound Reinforcement: Synthetic textile fabric and embedded steel wire helixCover: White, smooth EPDM nitrosamine free rubber compound, particularly resistant to abrasion, heat and weathering

Light-weight and flexible, specially designed aseffluent hose for leisure boat toilet systems..

Page 94: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 93 / 120 Catalog HOSES

XII. MATERIAL HANDLING HOSE

Dais has a large range of material handling hoses for many applications, including sandblast hoses, high pressure concrete hoses and hoses for conveying food in

granular or powder form.

12.1. Sandblast

LIBECCIO EN ISO 3861

Exeeds EN ISO 3861

Temperature Range -30 °C ÷ +70 °C

TolerancesI.D. По UNI EN ISO 1307/97O.D. RMA steel mandrel: ± 1,59 mm

L ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

LIBECCIO EN IS 3861IH36820200/40 25 40 10 40 0,92 250IH36820201/40 30 45 10 40 1,05 300IH36820202/40 32 48 10 40 1,37 320IH36820205/40 35 54 10 40 1,56 350IH36820204/40 40 60 10 40 1,85 400IH36820206/40 50 72 10 40 2,54 500IH36820207/40 60 82 10 40 2,95 600IH36820209/20 80 105 10 40 4,32 800IH36820210/20 90 115 10 40 4,84 900IH36820211/20 100 125 10 40 5,30 1000

LIBECCIO L EN IS 3861IH36820300/40 19 33 10 40 0,69 190IH36820301/40 25 39 10 40 0,84 250IH36820303/40 38 55 10 40 1,46 380IH36820305/40 42 60 10 40 1,70 420IH36820306/40 50 70 10 40 2,28 500IH36820307/40 60 80 10 40 2,66 600

Tube: Smooth, black, antistatic, abrasion resistant BR/NR rubber compound, abrasion ISO 4649: max 60 - 70 mmіReinforcement: Synthetic textile fabricsCover: Black, smooth, antistatic, weather and abrasion resistant SBR/NBR compound. The cover is pinpricked to prevent blistering and bubbling, max. resistance on finished hose: 2,0 MΩ/m

ApplicationsSuitable for conveying of wet and dry sand and gritblasting materials.

Note!!! Available on request: LIBECCIO EN ISO 3861/E with built-in copper wires to provide electrical continuity between both ends.

12.2. Cement

CEMENT SM 10

RMA steel mandrel

Temperature Range -30 °C ÷ +70 °C

Tolerances

I.D. ± 1,59 mmO.D. ± 2,38 mm

L ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

CEMENT SM 10IH36923100/40 50 64 10 30 1,92 300IH36923101/40 60 74 10 30 2,26 360IH36923105/20 75 93 10 30 3,53 450IH36923102/20 100 118 10 30 4,80 600IH36923104/20 110 128 10 30 5,21 660IH36923107/20 125 143 10 30 5,77 750

CEMENT SM H 10IH36923108/20 80 100 10 30 4,32 480IH36923106/20 100 120 10 30 5,24 600IH36923109/20 120 140 10 30 6,54 720

Tube: Black, antistatic smooth BR/NR rubber compound, abrasion resistant (60 - 70 mmі)Reinforcement: Synthetic textile fabrics, embeddedsteel wire helix Cover: Black, abrasion and weatherresistant, SBR rubber compound

ApplicationsSuitable for suction and delivery of dry cement to roadtankers and storage bins or silos.Note! On request, with built-in copper wires to provide electrical continuity between both ends (CEMENT SM/E).

Page 95: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 94 / 120 Catalog HOSES

CEMENT 713 10Temperature Range -30 °C ÷ +70 °C

Tolerances I.D. ± 1,59 mmO.D. ± 2,38 mmL ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH36822223/40 50 68 10 30 2,04 600IH36822224/40 60 78 10 30 2,38 720IH36822225/40 63,5 81 10 30 2,49 760IH36822226/40 75 85 10 30 1,64 –IH36822217/40 75 93 10 30 2,92 900IH36822222/40 80 98 10 30 3,10 960IH36822230/40 90 110 10 30 3,90 1080IH36822233/40 100 112 10 30 2,54 – IH36822220/40 100 120 10 30 4,29 1200

Tube: Smooth, black, antistatic, abrasion resistant BR/ NR rubber compound. Abrasion: max 60-70 mmcReinforcement: Synthetic textile fabrics and builtin copper wire giving electrical continuity between both ends. Cover: Black, abrasion and weatherresistant, SBR rubber compound.

ApplicationsSuitable for delivery of dry cement , grain, seeds andanimal feed to road tankers and storage bins or silos

ZEMENT DTemperature Range -30 °C ÷ +70 °C

Tolerances

I.D. ± 1,59 mmO.D. ± 2,38 mm

L ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

ZD75/40 75 91 6 18 3 400ZD100/40 100 120 6 18 4 550Tube: Special rubber compound black, el. conductive

Reinforcement: One textile braid with tinned copper strandsCover: SBR black, electrically conductive

ApplicationsGrey band hose for dry cement, plaster, kieselguhr, granulates, wheat and feeding stuffs

12.3. Mortar

INTONACATRICI 12

RMA steel mandrel

Temperature Range -30 °C ÷ +70 °C

Tolerances I.D. ≤ I.D. 19 mm: ± 0,79 mm

> I.D. 19 mm: ± 1,59 mmO.D. ± 1,59 mm

L ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH36822055/40 19 33 12 40 0,70 –IH36822049/40 50 65 12 40 1,66 –IH36822062/40 60 78 12 40 2,50 –IH36822052/40 65 85 12 40 3,03 –

Tube: Black, abrasion resistant, smooth BR/NR rubber compound (60 - 70 mmі)Reinforcement: Synthetic textile fabricsCover: Black, abrasion and weatherresistant, SBR rubber compound

ApplicationsDesigned for delivery of plaster and abrasive materials such as sand, gravel, mortar and wet cement from plastering machines or spray nozzles.

Page 96: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 95 / 120 Catalog HOSES

INTONACATRICI 25-40

RMA steel mandrel

Temperature Range -30 °C ÷ +70 °C

TolerancesI.D. ≤ I.D. 35 mm: ± 0,79 mm

> I.D. 35 mm: ± 1,59 mmO.D. ± 1,59 mm

L ± 1%

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

INTONACATRICI 25IH36822001/40 25 37 25 75 0,81 300IH36822003/40 30 42 25 75 0,93 360IH36822000/40 35 48 25 75 1,16 420IH36822063/40 40 53 25 75 1,27 480IH36822002/40 50 66 25 75 1,92 600

INTONACATRICI H 25IH36822013/40 65 85 25 75 3,03 780

INTONACATRICI 40IH36822041/40 32 46 40 120 1,14 380IH36822050/20 65 85 40 120 3,04 780

INTONACATRICI L 40IH36822030/40 25 38 40 120 0,89 300IH36822044/40 35 49 40 120 1,24 420IH36822031/40 50 66 40 120 1,95 600

INTONACATRICI H 40IH36822004/40 40 56 40 120 1,60 480

Tube: Black, abrasion resistant, antistatic smooth BR/NR rubber compound (60 - 70 mmі)Reinforcement: Synthetic textile fabricsCover: Black, abrasion and weatherresistant, SBR rubber compound

ApplicationsDesigned for delivery of plaster and abrasive materials such as mortar and wet cement from plastering machines or spray nozzles.

12.4. Concrete

BETON 80

RMA steel mandrel, acc. UNI EN ISO 1307/97

Temperature Range -40 °C ÷ +70 °C

Tolerances I.D.≤ I.D. 65 mm: ± 1,20 mmI.D. 76 mm: ± 1,40 mmI.D. 100 - 125 mm: ± 1,60 mm

O.D. ± 1,59 mmL ± 1%

Size 51 mm ÷ 125 mm

Hose Construction ApplicationsTube: Smooth, black NR/SBR compound resistant to the abrasive action of the concrete abrasion DIN 53516: max 50±5 mmіReinforcement: Steel wire cord pliesCover: Black, smooth, weather and abrasion resistant NR/SBR rubber compound

Suitable for placement of concrete at castinglocations by concrete pumps at the ends of themachine arms.Supplied assembled with swaged on full flowhardened couplings at one end or both ends.

12.5. General Purpose

MULTIREX PU/ANCTemperature Range -15 °C ÷ +65 °C

Suction ≤I.D . 40 m m : 0,75 bar I.D. 45 - 152 mm: 0,70 bar

Tolerances I.D. & O.D. ± 4%L ± 1%

All other technical data are subject to a: ± 5 % tolerance.Size 40 mm ÷ 152 mm

Hose Construction ApplicationsLight and flexible hose having a grey rigid PVC spiral embedded in a transparent flexible PVC wall.With external copper wire giving the electrical continuity. Inside PU layer0,4 mm.Foods and beverages – the polyurethane used is in conformity with:• FDA - CFR 21 parts 175,105, 177,1680, 177,2600• CEE 82/711, 85/572, 89/10, 90/128, 92/30, 93/8, 95/3, 98/11• German BGA for foodstuff application

Suction and pressure hose for: water, fertilisers, food industry, chemical industry, industry for the manufacturing of wood and plastic materials, ventilation, pharmaceutical industry, mechanical engineering.

Page 97: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 96 / 120 Catalog HOSES

MEDIREX PUTemperature Range -25 °C ÷ +60 °C Suction 0,80 bar (590 mm Hg)

Tolerances I.D. & О.D ± 4%

L ± 1%All other technical data are subject to a: ± 5 % tolerance.Size 38 mm ÷ 150 mm

Hose Construction ApplicationsFlexible hose having a white rigid spiral embedded in a metallized green colour flexible hose.PU body with 1,5 mm wall thickness.

Excellent resistance to pressure and vacuum. Superior resistance to internal abrasion. Resistant to atmospheric conditions and chemicals. Suction and ducting hose especially for sand, gravel, cement, slurry, etc. Specially suitable for abrasive media.

Note! Available on request: MEDIREX PU/ANC with an embedded copper wire to assure electrical continuity.

FORTIREX PU/ANCTemperature Range -25 °C ÷ +60 °C Suction 0,90 bar (660 mm Hg)

Tolerances I.D. &О.D ± 4%

L ± 1%All other technical data are subject to a: ± 5 % tolerance.Size 38 mm ÷ 152 mm

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH35527038/50 38 – 9 27 0,8 336IH35527040/50 40 – 9 27 0,9 350IH35527050/50 50 – 8 24 1,2 427IH35527060/50 60 – 7,5 22,5 1,6 501IH35527070/50 70 – 7 21 1,9 585IH35527075/50 75 – 6,5 19,5 2,0 620IH35527080/50 80 – 6,5 19,5 2,2 752IH35527090/50 90 – 5,5 16,5 2,6 840IH35527100/30 100 – 5 15 3,1 928IH35527120/30 120 – 4 12 4,0 1102IH35527152/20 152 – 3 9 6,3 1368

Flexible hose having a white rigid spiral embedded in a metallized green colour flexible hose. With an embedded copper wire to assure electrical continuity. PU body with 1,5 mm wall thickness.

ApplicationsExcellent resistance to pressure and vacuum. Superior resistance to internal abrasion. Resistant to atmospheric conditions and chemicals. Suction and ducting hose especially for sand, gravel, cement, slurry, etc.Specially suitable for abrasive media.

APERSPIR PUTemperature Range -20 °C ÷ +80 °C Suction 0,95 bar

Tolerances I.D. & O.D. ± 4%L ± 1%

All other technical data are subject to a: ± 5 % tolerance.

Hose Construction NumberI.D. O.D. WP BP Weight Min Rmm mm bar bar kg mm

IH35644030/20 30 – 6 18 0,63 120IH35644038/20 38 – 6 18 0,80 152IH35644040/20 40 – 6 18 0,95 160IH35644045/20 45 – 6 18 1,15 180IH35644050/20 50 – 6 18 1,30 200IH35644051/20 51 – 6 18 1,30 204IH35644060/20 60 – 5 15 1,75 240IH35644070/20 70 – 5 15 2,10 280IH35644076/20 76 – 4 12 2,30 304IH35644102/20 102 – 3 9 3,75 408

Multilayer PU-PVC hose with a steel wire reinforcementspiral. Inside wall PU, outside layer soft PVC.Perfect adhesion between layers. Standard colour: clear – transparent. Foods and beverages – the polyurethane used is inconformity with:• FDA-CRF 21 parts 175,105, 177, 1680, 177, 2600• CEE 82/711, 85/572, 89/109, 90/128, 92/30, 93/8,95/3, 98/11• German BGA for foodstuff application

ApplicationsVery heavy tasks and applications: industry, construction, agriculture. Particularly suitable for food at high speed as well as for very abrasive media, such as cement, sand, gravel,grains, metal shavings, etc.

Page 98: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 97 / 120 Catalog HOSES

12.6. Special Heavy Duty

CERGOM 10Temperature Range -30 °C ÷ +70 °C

Tolerances I.D. ≤ I.D. 38 mm: ± 0,79 mm

≥ I.D. 42 mm: ± 1,59 mmL ± 1%

Hose Construction ApplicationsTube: ceramic hexagonal plates (sinterized Alumina)processed to match black BR/NR rubber compound, highly resistant to abrasion. Good resistance to some chemical products: please contact our technical assistance for guidelinesabout these applications. The plates are made from Alumina Oxide and produced sinterizing atomized dust according to the most advanced technology. A peculiar dense structure and avery high hardness are assured by a special manufacturing process. These features place this hose on top of quality for wear resistance as ever before. The special surface guaranteesa perfect flow of the medium avoiding problems due to packing and oxidation.Reinforcement: synthetic textile fabrics, embedded steel wire helix and built-in copper wires to provide electrical continuity between both ends.Cover: black, antistatic (R < 2,0 MΩ/m), abrasion andweather-resistant, SBR/NBR rubber compound.

Suitable for pneumatic suction and delivery of dry cement, coal, CDR (fuel by-waste material), minerals, ceramic powder, glass recovery, fibreglass, and to load tankers and storage bins or silos.Applications in the industries: steelworks, cookery,thermoelectric power plant, cement works, miningindustries, ceramic works, glassworks, insulating material manufactures etc.

Note! Supplied in customized lengths assembled with standard flanges DIN PN 10/16 and, on request, withspecial fittings, the working pressure is of 3-6 bar according to assembly method.

Number ID OD WP BP Weight R minmm mm bar bar kg mm

IH36829020/0 25 49 10 30 2,59 375IH36829021/0 32 56 10 30 3,07 480IH36829022/0 38 62 10 30 3,48 570IH36829023/0 42 66 10 30 3,75 630IH36829024/0 48 72 10 30 4,17 720IH36829025/0 50 74 10 30 4,31 750IH36829026/0 60 86 10 30 5,27 900IH36829027/0 63,5 90 10 30 5,54 953IH36829028/0 70 95 10 30 6,00 1050IH36829029/0 75 100 10 30 6,35 1125IH36829030/0 80 106 10 30 6,93 1200IH36829031/0 100 130 10 30 8,56 1500IH36829032/0 114 145 10 30 13,24 1710IH36829033/0 125 157 10 30 14,42 1875IH36829034/0 150 185 10 30 19,42 2250IH36829035/0 203 245 10 30 27,68 3045

Page 99: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 98 / 120 Catalog HOSES

XIII. Cable Protection HoseCables are mostly unprotected and caught in a crossfire of dangers.

Extremely flexible and resistant to torsion, cable protection hoses are used as a physical protection for flexible electric cables in applications such as robot joints and automatic welding machines. They aremanufactured with insulating rubber compounds, highly ageing- andozone-resistant and resisting chemicals and mineral oil.

13.1. Protection and Cooling

CABLEPRESS B/L 10 - 20Tº range -40 °C ÷ +90 °C, with peaks up to 120 °CSuction 0,90 bar (660 mm Hg)TolerancesUNI EN ISO 1307/97

I.D. ≤ I.D. 19 mm: ± 0,80 mm> I.D. 19 mm: ± 1,20 mm

L ± 1%

Size CABLEPRESS B/L 10: 10, 13, 16, 19, 25mmCABLEPRESS B/L 20: 6, 9, 13, 19mm

Hose construction ApplicationsTube: Blue, smooth, certified EPDM dielectric rubber compound(R ≥ 4 x 1010 Ω/m) Reinforcement: Synthetic textile fabricsCover: Blue, smooth, certified EPDM dielectric rubber compound (R ≥ 4 x 1010 Ω/m), ageing and weather resistant

Hose specially designed for cooling and protection of electrical cables. Resistant to steam up to 2 bar/120 °C (+248 °F), hotwater and detergents, where a conformity to foodstuff regulation is not required.

CABLE SN 10Tº range -40 °C ÷ +90 °C,TolerancesRMA steel mandrel

I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 25mm, 32mm

Hose construction ApplicationsTube: Blue, smooth, certified EPDM dielectric rubber compound (R ≥ 4 x 1010 Ω/m)Reinforcement: Synthetic textile fabrics and embedded polyamide helixCover: Blue, smooth, certified EPDM dielectric rubber compound (R ≥ 4 x 1010 Ω/m), ageing and weather resistant

Hose specially designed for cooling and protection of electrical cables.Resistant to hot water and detergents, where aconformity to foodstuff regulation is not required.

ROBOTTº range -20 °C ÷ +80 °C,

TolerancesRMA steel mandrel

I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

O.D. ± 1,59 mmL ± 1%

SizeROBOT TR: 30, 40, 44, 48ROBOT CIA TS: 25, 32, 40, 42ROBOT ED TS: 32, 38, 42

Hose construction ApplicationsTube: Black, smooth, synthetic NR/SBR rubber compoundReinforcement: Synthetic textile fabricsCover: Black, abrasion, ozone and weatherresistant, synthetic SBR rubber compound

Light-weight and flexible, recommended for protection and carrying welding cable coolant and particularly for robot applications, where a twist-connector is required

Page 100: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 99 / 120 Catalog HOSES

SALDATRICI 5 - 10Tº range -20 °C ÷ +80 °C,

TolerancesRMA steel mandrel

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

O.D. ± 1,59 mmL ± 1%

Size SALDATRICI 5: 25, 30, 38 mmSALDATRICI 10: 28, 35, 38, 42mm

Hose construction ApplicationsTube: Black, smooth, SBR rubber compoundReinforcement: Synthetic textile fabricsCover: Black, abrasion, ozone and weather-resistant, SBR rubbercompound

Light-weight and flexible, recommended for protection and carrying welding cable coolant .

13.2. Protection

CABLE 109Tº range -20 °C ÷ +80 °C,

TolerancesRMA steel mandrel

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

O.D. ± 1,59 mmL ± 1%

Size 35, 38, 40, 45 mm

Hose construction ApplicationsTube: Black, smooth, SBR rubber compoundReinforcement: Synthetic textile fabricsCover: Black, abrasion, ozone and weatherresistant, SBR rubber compound

Extra light-weight and flexible, recommended forprotection and carrying welding and industrial cable

Page 101: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 100 / 120 Catalog HOSES

XIV. Multipurpose HoseParker manufactures a wide ange of multipurpose hoses for

different applications and are particularly versatile.For example PYTHON (for hot water, light chemicals) and

OILPRESS (high quality hose, flame retardant) give the customers maximum quality assurance and control, resulting in the Parker guarantee of product excellence.

14.1. EPDM Tube

PYTHON NV 20 Tº range -40°C ÷ +120°C, with peaks to 140°C

Tolerances съгласно UNI EN ISO 1307/97

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

О.D ± 1,59 mmL ± 1%

Hose construction NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH30351200/40 10 17 20 60 0,22 60IH30351200/80 10 17 20 60 0,22 60IH30351201/40 13 20 20 60 0,26 80IH30351201/80 13 20 20 60 0,26 80IH30351202/40 15 22 20 60 0,29 90IH30351202/80 15 22 20 60 0,29 90IH30351203/40 19 27 20 60 0,41 110IH30351203/80 19 27 20 60 0,41 110IH30351204/40 25 34 20 60 0,60 150IH36351201/40 32 44 20 60 0,98 320IH36351202/40 38 51 20 60 1,20 380IH36351203/40 42 56 20 60 1,42 420IH36351204/40 50 66 20 60 1,76 500

Tube: Black, antistatic, smooth EPDM nitrosamine free rubber compound, resistant to light-chemical media Reinforcement: Synthetic textile yarnsCover: Green, smooth EPDM nitrosamine free rubber compound

ApplicationsDesigned for air, cold and hot water and light-chemicalmedia.Major properties of PYTHON hoses are:• high ozone resistance• antistatic resistance• high temperature resistance• low temperature resistance• non-staining cover• high flexibility

PYTHON NY 30Tº range -40°C ÷ +120°C, with peaks to 140°C

Tolerances съгласно UNI EN ISO 1307/97

I.D. ≤ I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

О.D ± 1,59 mmL ± 1%

Hose construction NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

IH30351250/40 6 14 30 90 0,18 40IH30351250/80 6 14 30 90 0,18 40IH30351251/40 8 17 30 90 0,25 50IH30351251/80 8 17 30 90 0,25 50IH30351252/40 10 20 30 90 0,34 60IH30351252/80 10 20 30 90 0,34 60IH30351253/40 13 23 30 90 0,40 80IH30351253/80 13 23 30 90 0,40 80IH30351254/40 16 27 30 90 0,52 100IH30351254/80 16 27 30 90 0,52 100IH30351255/40 19 30 30 90 0,60 110IH30351255/80 19 30 30 90 0,60 110IH30351256/40 25 37 30 90 0,88 150IH36351250/40 32 44 30 90 0,95 320IH36351251/40 38 51 30 90 1,20 380IH36351252/40 42 56 30 90 1,45 420IH36351253/40 50 66 30 90 1,93 500IH36351254/40 65 82 30 90 2,50 650IH36351255/40 75 91 30 90 3,08 750IH36351256/40 100 122 30 90 5,05 1000

Tube: Black, antistatic, smooth EPDM nitrosamine free rubber compound, resistant to light-chemical media Reinforcement: Synthetic textile yarnsCover: Yellow, smooth EPDM nitrosamine free rubber compound

ApplicationsDesigned for air, cold and hot water and light-chemicalmedia.Major properties of PYTHON hoses are:• high ozone resistance• antistatic resistance• high temperature resistance• low temperature resistance• non-staining cover• high flexibility

Page 102: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 101 / 120 Catalog HOSES

VARIOPRESS N/L 10 - 20Tº range -40°C ÷ +100°C, with peaks to 120°C

TolerancesAccording to EN ISO 1307/97

I.D. I.D. 5 mm: ± 0,60 mmI.D. 8 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%

Size VARIOPRESS N/L 10: 5mm ÷ 25mm VARIOPRESS N/L 20: 10mm ÷ 25mm

Hose construction ApplicationsTube: Black, antistatic, smooth EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile fabric Cover: Black, antistatic (R < 1 MΩ/m), smooth EPDM nitrosamine free rubber compound, resistant to abrasion, ageing, heat and weathering

Designed for air, cold and hot water and light-chemical media.

FIREPRESS N/L - NR/L 20Tº range -40°C ÷ +80°C, with peaks to 100°C

Tolerances съгласно UNI EN ISO 1307/97

I.D. I.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%

Size VARIOPRESS N/L 10: 5mm ÷ 25mmVARIOPRESS N/L 20: 10mm ÷ 25mm

Hose construction ApplicationsTube: Black, smooth, antistatic EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black or red, smooth, antistatic EPDM nitrosamine free rubber compound, resistant to ageing, heat, weather and particularly to ozone. Electrical Resistance: R < 108 Ω/m (black version only N/L)

Suitable for fire extinguisher tank-to-nozzle connectors, good resistance tolow and high temperature.

VARIO 10Tº range -40°C ÷ +100°CSuction Max. 0,8 bar (590 mm Hg)

TolerancesRMA steel mandrel

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 25mm, 32mm, 35mm, 38mm, 51mm

Hose construction ApplicationsTube: Black, antistatic, smooth EPDM rubber compoundReinforcement: Synthetic textile fabric and embedded steel wire helixCover: Black, antistatic (R < 1 MΩ/m), smooth EPDM rubber compound,particularly resistant to abrasion, heat and weathering

Light-weight and flexible, designed for suction and delivery of air, cold and hot water and mild chemicals.

VARIOCORD 20Tº range -40°C ÷ +100°C

Suction < I.D. 80 mm 0.5 bar (380 mm Hg)> I.D. 80 mm 0,3 bar (230 mmHg)

TolerancesRMA steel mandrel

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 25mm - 120mm

Hose construction ApplicationsTube: Black, antistatic, smooth, nitrosamine free EPDM rubber compoundReinforcement: Synthetic textile fabricCover: Black, antistatic (R < 1 MΩ/m), smooth, nitrosamine free EPDM rubber compound, particularly resistant to ozone, abrasion, heat and weathering

Designed for delivery of air, cold and hot water and non-aggressive chemicals.

Page 103: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 102 / 120 Catalog HOSES

VARIO SN 10Tº range -10°C ÷ +65°CSuction Max. 0,8 bar (590 mm Hg)

TolerancesRMA steel mandrel

I.D. ≤糎糎BB糎Σ糎糎BB> I.D. 38 mm: ± 1,59 mm

L ± 1%Size 19mm - 50mm

Hose construction ApplicationsTube: Black, antistatic, smooth EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile fabric and embedded polyamide helixCover: Black, antistatic (R < 1 MΩ/m), smooth EPDM nitrosamine freerubber compound, particularly resistant to ozone, abrasion, heat and weathering

Light-weight and flexible, designed for suction and delivery of air, cold and hot water and non-aggressive chemicals.

WASSERPRESS 20Tº range -40°C ÷ +120°CTolerancesAccording to UNI EN ISO 1307/97

I.D. I.D. 10 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%

Hose construction NumberI.D. O.D. WP BP W Min Rmm mm bar bar kg mm

WASSERPRESS 20 4YIH30118016/40 10 18 20 60 0,24 80IH30118003/40 13 20 20 60 0,25 100IH30118011/40 16 24 20 60 0,35 130IH30118004/40 19 27 20 60 0,40 150IH30118005/40 25 34 20 60 0,57 200WASSERPRESS 20 4Y NB/LIH30118029/40 13 20 20 60 0,25 100IH30118030/40 19 27 20 60 0,40 150IH30118031/40 25 34 20 60 0,57 200WASSERPRESS 20 4AIH30118020/40 13 20 20 60 0,25 100IH30118021/40 19 27 20 60 0,40 150IH30118022/40 25 34 20 60 0,57 200WASSERPRESS 20 4BIH30118025/40 13 20 20 60 0,25 100IH30118026/40 19 27 20 60 0,40 150IH30118027/40 25 34 20 60 0,57 200WASSERPRESS 20 4B NY/LIH30118035/40 13 20 20 60 0,25 100IH30118036/40 19 27 20 60 0,40 150WASSERPRESS 20 4RIH30118007/40 13 20 20 60 0,25 100IH30118010/40 16 24 20 60 0,35 130IH30118008/40 19 27 20 60 0,40 150IH30118009/40 25 34 20 60 0,57 200WASSERPRESS 20 4VIH30118012/40 13 20 20 60 0,25 100IH30118013/40 15 23 20 60 0,33 125IH30118006/40 19 27 20 60 0,40 150IH30118014/40 25 34 20 60 0,57 200

Tube: Black, smooth EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black, with four longitudinal coloured stripes, smooth, abrasion, heat, ageing and weathering resistant EPDMnitrosamine free rubber compound

ApplicationsSuitable for discharge of hot and cold water, air andlight-chemical medias in many industrial and agriculturalapplications.

Hose Color CodingWASSERPRESS 20 4Y yelloWASSERPRESS 20 4Y NB/LWASSERPRESS 20 4A orangeWASSERPRESS 20 4B blueWASSERPRESS 20 4B NY/LWASSERPRESS 20 4R red

WASSERPRESS 20 4V black

JUMBO N/LTº range -40°C ÷ +120°C

Tolerances according UNI EN ISO 1307/97

I.D. ≤糎糎BB糎Σ糎糎BBI.D. 25 mm: ± 1,20 mm

L ± 1%Size 13mm, 15mm, 19mm, 25mm

Hose construction ApplicationsTube: Black, smooth EPDM nitrosamine free rubber compoundReinforcement: Synthetic textile yarnsCover: Black, smooth EPDM nitrosamine free rubber compound with threered, longitudinal and different stripes, resistant to abrasion, heat and weathering

Suitable for the discharge of hot and cold water, air and light-chemical media in many industrial and agriculturalapplications.

Page 104: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 103 / 120 Catalog HOSES

14.2. NBR TUBE

OILPRESS N/L 20 - 30Tº range -30°C ÷ +100°C, with peaks up to 120°CTolerancesAccording to UNI EN ISO 1307/97

I.D. I.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%

Size OILPRESS N/L 20: 6, 7, 8, 10, 13, 16, 19, 25mmOILPRESS N/L 30: 6, 8, 9, 10, 13, 16, 19, 25mm

Hose construction ApplicationsTube: Smooth, black, oil and fuel resistant NBR rubber compound, suitable forpetroleum products with aromatic content not exceeding 50 %Reinforcement: Synthetic textile yarnsCover: Smooth, black, self-extinguishing, antistatic (R < 1 MΩ/m) heat, oil,abrasion and weather resistant CR rubber compound

Suitable for multi-purpose applications requiring transfer of many types of fluids and for petroleum products with aromatic content not exceeding 50 %.

OILCORD 30Tº range -30°C ÷ +100°C, with peaks up to 120°C

TolerancesRMA steel mandrel

I.D. I.D. 6 - 19 mm: ± 0,80 mmI.D. 25 mm: ± 1,20 mm

L ± 1%Size 32mm – 60mm

Hose construction ApplicationsTube: Smooth, black, oil and fuel resistant NBR rubber compound, suitable for petroleum products with aromatic content not exceeding 50 %Reinforcement: Synthetic textile fabricsCover: Smooth, black, antistatic (R < 1 MΩ/m) oil, abrasion and weather resistant SBR/NBR rubber compound

Suitable for multi-purpose applications requiring the transfer of many types of fluids and for petroleum products with aromatic content not exceeding 50 %. The light-weight (L) construction is recommended for light-duty or personalised applications

OILPLUS 30Tº range -30°C ÷ +100°C, with peaks up to 120°C

TolerancesRMA steel mandrel

I.D. ≤I.D. 38 mm: ± 0,79 mm> I.D. 38 mm: ± 1,59 mm

O.D. ± 1,59 mmL ± 1%

Size 25mm – 75mm

Hose construction ApplicationsTube: Smooth, black, oil and fuel resistant NBR rubber compound, suitable for petroleum products with aromatic content not exceeding 50 % Reinforcement: Synthetic textile fabrics and embedded steel wire helixCover: Smooth, black, antistatic (R < 1 MΩ/m) oil, flame resistant, abrasion and weather resistant SBR/CR rubber compound

Suitable for multi-purpose applications requiring transfer of many types of fluids and for petroleum products with aromatic content not exceeding 50 %, high temperature petroleum and water, based hydraulic fluids, oil, air.

Page 105: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 104 / 120 Catalog HOSES

XV. Stainless Steel Hose

This hose line is specially designed for medium and highpressure applications in the chemical and petrochemical industries, pharmaceutical laboratories, nuclear, glass manufacture, paper andpneumatic industries.

15.1. Low Pressure

GASINOX /B0Code

ID WP TP BP R min Wmm bar bar bar mm Kg/m

SSHCG0006 6 10 15 40 75 0,22SSHCG0010 10 10 15 40 90 0,33SSHCG0012 12 5,5 7,5 20 100 0,40SSHCG0015 15 5 7 18 105 0,50SSHCG0020 20 4,5 6 16 115 0,50SSHCG0025 25 4 6 16 125 0,65SSHCG0032 32 3 4,5 12 150 0,90SSHCG0040 40 2 3 8 200 1,10SSHCG0050 50 1 1,5 4 275 1,60SSHCG0065 65 1 1,5 4 350 1,90SSHCG0080 80 1 1,5 4 400 2,25SSHCG0100 100 0,7 1.1 3 500 3,10SSHCG0125 125 0,7 1.1 3 660 5,00SSHCG0150 150 0,5 0,75 2 760 5,80SSHCG0200 200 0,3 0,45 1,2 1020 6,00SSHCG0250 250 0,25 0,36 1 1.220 7,50

CORRUGATED TUBE WITHOUT BRAID Quality of corrugated tube: AISI. 316Temterature range -200°C ÷ 800°C

GASINOX /B0 /SCode

ID WP TP BP R min Wmm bar bar bar mm Kg/m

SSHCG20006 6 10 15 40 55 0,22SSHCG20010 10 10 15 40 60 0,33SSHCG20012 12 5,5 7.5 20 65 0,40SSHCG20015 15 5 7 18 70 0,50SSHCG20020 20 4.5 6 16 85 0,50SSHCG20025 25 4 6 16 95 0,65SSHCG20032 32 3 4.5 12 105 0,90SSHCG20040 40 2 3 8 150 1,10SSHCG20050 50 1 1,5 4 165 1,60SSHCG20065 65 1 1,5 4 200 1,90SSHCG20080 80 1 1,5 4 300 2,25SSHCG20100 100 0,7 1,1 3 350 3,10SSHCG20125 125 0,7 1,1 3 400 5,00SSHCG20150 150 0,5 0,75 2 550 5,80SSHCG20200 200 0,3 0,45 1.2 600 6,00SSHCG20250 250 0,25 0,36 1 850 7,50

MAXIMUM FLEXIBILITY BRAIDLESS CORRUGATED TUBE Quality of corrugated tube: AISI. 316Temterature range -200°C ÷ 800°C

15.2. Meduim Pressure

GASINOX /B1Code

ID WP TP BP R min Wmm bar bar bar mm Kg/m

SSHCG1006 6 170 257 690 75 0,33SSHCG1010 10 158 227 604 90 0,48SSHCG1012 12 113 174 452 100 0,60SSHCG1015 15 95 136 494 105 0,70SSHCG1020 20 90 133 348 115 0,75SSHCG1025 25 72 120 308 125 0,95SSHCG1032 32 52 83 238 150 1,40SSHCG1040 40 48 67 182 200 1,75SSHCG1050 50 40 61 186 275 2,45SSHCG1065 65 32 56 138 350 3,00SSHCG1080 80 28 40 128 400 3,55SSHCG1100 100 20 32 86 500 4,80SSHCG1125 125 16 24 64 660 7,50SSHCG1150 150 11 16 40 760 9,10SSHCG1200 200 8 12 32 1.020 10,5SSHCG1250 250 6 9 24 1.220 12,05

CORRUGATED TUBE WITH 1 BRAIDQuality of corrugated tube: AISI. 316. Quality of braid: AISI. 304Temterature range -200°C ÷ 800°C

Page 106: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 105 / 120 Catalog HOSES

GASINOX /B1 /SCode

ID WP TP BP R min W mm bar bar bar mm Kg/m

SSHCG21006 6 170 257 690 55 0,33SSHCG21010 10 158 227 604 60 0,48SSHCG21012 12 113 174 452 65 0,60SSHCG21015 15 95 136 494 70 0,70SSHCG21020 20 90 133 348 85 0,75SSHCG21025 25 72 120 308 95 0,95SSHCG21032 32 52 83 238 105 1,40SSHCG21040 40 48 67 182 150 1,75SSHCG21050 50 40 61 186 165 2,45SSHCG21065 65 32 56 138 200 3,00SSHCG21080 80 28 40 128 300 3,55SSHCG21100 100 20 32 86 350 4,80SSHCG21125 125 16 24 64 400 7,50SSHCG21150 150 11 16 40 550 9,10SSHCG21200 200 8 12 32 600 10,5SSHCG21250 250 6 9 24 850 12,5

MAXIMUM FLEXIBILITY CORRUGATED TUBE WITH 1 BRAID Quality of corrugated tube: AISI. 316. Quality of braid: AISI. 304Temterature range -200°C ÷ 800°C

15.3. High Pressure

GASINOX /B2 Code

ID WPbar

TPbar

BPbar

R min Wmm mm Kg/m

SSHCG2006 6 305 452 1100 75 0,45SSHCG2010 10 260 380 880 90 0,65SSHCG2012 12 206 304 804 100 0,80SSHCG2015 15 160 240 650 110 0,91SSHCG2020 20 150 230 600 115 1,00SSHCG2025 25 115 185 460 125 1,25SSHCG2032 32 89 133 356 150 1,95SSHCG2040 40 72 108 288 200 2,45SSHCG2050 50 50 72 192 275 3,40SSHCG2065 65 41 61 164 350 4,20SSHCG2080 80 38 57 152 400 5,00SSHCG2100 100 30 51 130 500 6,70SSHCG2125 125 26 38 100 660 10,2SSHCG2150 150 20 30 80 760 12,7SSHCG2200 200 14 21 56 1.020 15,5SSHCG2250 250 12 19 50 1.220 18,0

CORRUGATED TUBE WITH 2 BRAIDSQuality of corrugated tube: AISI. 316. Quality of braid: AISI. 304Temterature range -200°C ÷ 800°C

GASINOX /B2 /SCode

ID WPbar

TPbar

BPbar

R min W mm mm Kg/m

SSHCG22006 6 305 452 1100 55 0,45SSHCG22010 10 260 380 880 60 0,65SSHCG20012 12 206 304 804 65 0,80SSHCG22015 15 160 240 650 70 0,91SSHCG22020 20 150 230 600 85 1,00SSHCG22025 25 115 185 460 95 1,25SSHCG22032 32 89 133 356 105 1,95SSHCG22040 40 72 108 288 150 2,45SSHCG22050 50 50 72 192 165 3,40SSHCG22065 65 41 61 164 200 4,20SSHCG22080 80 38 57 152 300 5,00SSHCG22100 100 30 51 130 350 6,70SSHCG22125 125 26 38 100 400 10,2SSHCG22150 150 20 30 80 550 12,7SSHCG22200 200 14 21 56 600 15,5SSHCG22250 250 12 19 50 850 18,0

MAXIMUM FLEXIBILITY CORRUGATED TUBE WITH 2 BRAIDS Quality of corrugated tube: AISI. 316. Quality of braid: AISI. 304Temterature range -200°C ÷ 800°C

15.4. Fittings

BSP or NPT Male threaded

BSP or NPT Female theaded

Type CG5 for welding

type CG6 for welding

“Milk” threaded

KAMLOK adapter or

coupler

Swivel flange Fixed flange And many others

Page 107: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 106 / 120 Catalog HOSES

XVI. Peristaltic Pump HosesThis hoses are designed for peristaltic (hose)

pumps.Our hoses named PERISTALT are compatible

with most common peristaltic pumps as Bredel™, Delasco™, Envirotech™, PCM™, Periflo, Ponndorf, Rosewater, Watson Marlow™, BLACKMER andothers.

The most important for long life pumping is lubrecanting. Material selection:

Code Name T range Characteristics

NRH Natural Rubber -20°C ÷ +80°C A first choice for all general applications, providing best mechanical life.Ideal for use with mild acids, alkalis andmost oxidizing agentsExcellent resistance to abrasive slurries

NIT-FG Buna Nitrile Food Grade -20°C ÷ +80°C

Suitable for use with oil based solutionsrequiring a food grade liner.Ideal for use with food oils, fats & mostdetergentsHose liner material FDA Approved

NIT-IND Buna Nitrile Industrial Grade -20°C ÷ +80°C Ideal for use with industrial oils, fats & detergents

Excellent resistance to abrasive slurriesBUT Butyl -30°C ÷ +110°C For specific chemical resistances please enquire

EPDM EPDM -20°C ÷ +100°C For specific solvent resistances to Ketones, esters & many concentrated acids

HYP Hypalon -10°C ÷ +80°C For aggressive acids, alkalis or oxidizing solutionsNEO Neoprene -20°C ÷ +80°C For specific chemical resistances enquire

Technical haracteristicsI.D. Num leyers WP Weight Max lenght10 2 8 0,35 200015 2 8 0,40 200020 4 10 0,70 200025 4 16 2 300032 4 16 3 300040 4 16 5 450050 4 16 8 600065 4 16 11 600080 4 16 21 6000100 4 16 30 6000125 6 16 65 6000150 6 10 130 6000

How to select PERISTALT hoseI.D. NRH NIT-FG NIT-IND BUT HYP NEO10 PH10-NRH PH10-NIT-FG PH10-NIT-IND PH10-BUT PH10-HYP PH10-NEO15 PH15-NRH PH15-NIT-FG PH15-NIT-IND PH15-BUT PH15-HYP PH15-NEO20 PH20-NRH PH20-NIT-FG PH20-NIT-IND PH20-BUT PH20-HYP PH20-NEO25 PH25-NRH PH25-NIT-FG PH25-NIT-IND PH25-BUT PH25-HYP PH25-NEO32 PH32-NRH PH32-NIT-FG PH32-NIT-IND PH32-BUT PH32-HYP PH32-NEO40 PH40-NRH PH40-NIT-FG PH40-NIT-IND PH40-BUT PH40-HYP PH40-NEO50 PH50-NRH PH50-NIT-FG PH50-NIT-IND PH50-BUT PH50-HYP PH50-NEO65 PH65-NRH PH65-NIT-FG PH65-NIT-IND PH65-BUT PH65-HYP PH65-NEO80 PH80-NRH PH80-NIT-FG PH80-NIT-IND PH80-BUT PH80-HYP PH80-NEO

100 PH100-NRH PH100-NIT-FG PH100-NIT-IND PH100-BUT PH100-HYP PH100-NEO125 PH125-NRH PH125-NIT-FG PH125-NIT-IND PH125-BUT PH125-HYP PH125-NEO150 PH150-NRH PH150-NIT-FG PH150-NIT-IND PH150-BUT PH150-HYP PH150-NEO

Page 108: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 107 / 120 Catalog HOSES

XVII. CRIOGENIC HOSE

For loading and unloading of tankers and barges with cryogenic gases as oxygen, nitrogen, acetylen, carbon dioxide, LPG, ammonia, etc. Specialy designed for offshore loading of LPG tankers. Exceed IMO and Gas Carrier Codes.

CRIOGEN

Tº range -200 °C ÷ +80 °C Suction 0,8 bar

Tests

Hoses assemblies are tested to a minimum 15 times their maximum working pressurebefore dispatch and issued with test certificates. All hoses have a safety factor of 5 onworking pressure. CRIOGEN hoses for marine applications has been independently tester by Lloyds as comformint to BS 4089:1989 and to IMO GAS carrier Code requirements. Hoses for ammonia cervices are identified with a yellow stripe

Sertification For each hose

Hose construction Applications Innex helix: SS 316 Outer helix: SS 316 Inner leyer. Polyamyde Leyers. Polyamide/Polyester Outer leyer. Polyamyde

For loading and unloading of tankers and barges with cryogenic gases. Hoses for ammonia cervices are identified with a yellow stripe

Number ID OD WP BP Wieght R min CRIO25 25 - 25 125 1 400 CRIO38 38 - 25 125 1,5 550 CRIO50 50 - 25 125 2,5 700 CRIO65 65 - 25 125 3,3 800 CRIO75 75 - 25 125 4,5 1100 CRIO100 100 - 21 105 7,5 1550 CRIO150 150 - 21 105 13,.5 2000 CRIO200 200 15 75 18,5 3000

Page 109: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 108 / 120 Catalog HOSES

XVIII. PTFE HOSE

PTFE, or Polytetrafluoroethylene, comprises long-chain molecules of

carbon atoms, each linked to two fluorine atoms.

The fluorine atoms provide a helical spiral which surrounds the carbon

chain and protects it. It is this structure which creates the unique properties

for which PTFE is well-known.

Excellent Chemical Resistance PTFE is renowned as the most chemically resistant material known. Only a

very few, very unusual substances and conditions can affect it, like

Fluorine gas at high temperature and pressure and liquid, boiling sodium metal. PTFE lined hoses can

therefore be used for a wider variety of chemicals than any other hose type, making it the ideal choice for

very corrosive chemical applications and multiproduct applications.

Non-Stick Surface The use of PTFE as a surface for cookware products has

demonstrated to the world how easily cleanable PTFE

surfaces are.

This means that PTFE lined hoses can be purged 100%

clean more quickly, easily and reliably than any other type

of hose.

Excellent Temperature Range The cookware application also demonstrates another of

PTFE’s many attributes - temperature resistance. PTFE

itself can be used as a hose liner at temperatures from -

150°C up to +260°C, dependent upon the hose design and

the application conditions.

This is the widest temperature range of any rubber or plastic

hose lining material.

Hose Design The only issue with PTFE as a hose lining material is the

best way it can be integrated in to the hose design.

Page 110: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 109 / 120 Catalog HOSES

18.1. CORRUGATED PTFE Hose

CORROFLON

Convoluted, Reinforced PTFE Lined HoseCorroflon was launched in 1978 and, since then, has been continually updated and improved. Now it is the industry-standard convoluted flexible PTFE hose for major chemical, pharmaceutical and food companies worldwide.The key to Corroflon’s success lies in its design and build quality, which guarantees a long, safe and reliable service life.Corroflon’s design differs from every other convoluted PTFE hose on the market, which results in distinctive and measurable performance and safety advantages.

Firstly, Corroflon will give better cleanability and drainability than any other convoluted PTFE hose on the market. This is because Corroflon is designed and manufactured in such a way that the angle of the convolutions is extremely shallow - 80° to 120°, compared with only 45° to 65° in other convoluted hose designs.

Secondly, Corroflon is the only PTFE lined convoluted hose on the market to be fully kink and vacuum resistant at high pressures and temperatures. This is because Corroflon’s design incorporates a thick section external helical reinforcement wire which gives the radial support necessary to ensure maximum strength, whilst maintaining optimum flexibility and cleanability. The helix wire is welded directly to the end fittings at each end, ensuring security of attachment and electrical continuity.

And thirdly, Aflex is the only PTFE hose manufacturer to guarantee a minimum PTFE liner thickness of 1.5mm for hose sizes 1” and above, which ensures sufficient strength to prevent the tube from being internally pressurised from a sine wave shape into an extended square wave shape, which would lead to porosity, and eventually premature failure of the tube. This thick wall liner also minimises permeation, and is extended through the end fittings to give an uninterrupted clean flow of fluid through the fitting.

CORROFLON Hose Braids

GP – SS 316

PB - Polypropylene

HB - Hastelloy

TO – W/O cover

KYB - Kynar

RC – Rubber covered

SI – Sillicone rubber covered

Page 111: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 110 / 120 Catalog HOSES

Temperature range:SS braided: -70°C to +230°C, PB braided: -30°C to +100°C.SS, RC & SS, FP braided: -40°C to +140°C,SS,SI braided: -40°C to +180°C,KYB braided: -40°C to +120°C.

Fittings:DIN 11851 maleDIN 11851 femaleKAMLOK adapterKAMLOK couplerFlange PN10/16DIN 32676 Triclover fittingsSMS female threadRJT female thread

CORROFLON Size range and SpecificationsID Светъл

отвор OD Оплеткатип

OD наоплетката

Радиус наогъване WP BP Макс

дълж. Тегло

Mm inch mm mm mm mm bar bar m KgPTFE-0A-015

15 ½ 11,2 16,0

TO - 38 6 24 28 .21PTFE-0B-015 SS 17.5 38 41 450 28 .33PTFE-0C-015 PB 19.1 38 41 123 28 .26PTFE-0D-015 SS,RC/FP 23.5 57 41 450 20 .49PTFE-0E-015 RC,SI 23.5 57 41 450 10 .49PTFE-0F-015 KYB 19.1 38 20.5 61.5 28 .23PTFE-0A-020

20 ¾ 15,7 21,4

TO - 51 5 20 30 .29PTFE-0B-020 SS 23.1 51 35 210 30 .45PTFE-0C-020 PB 26.0 51 35 105 30 .36PTFE-0D-020 SS,RC/FP 29.6 76 35 210 20 .56PTFE-0E-020 RC,SI 29.6 76 35 210 20 .56PTFE-0F-020 KYB 26.0 51 17.5 52.5 30 .31PTFE-0A-025

25 1 21,5 29,4

TO - 70 4.5 18 40 0.45PTFE-0B-025 SS 31.7 70 31 150 40 0.70PTFE-0C-025 PB 34.0 70 31 93 40 0.56PTFE-0D-025 SS,RC/FP 36.6 105 31 150 20 0.98PTFE-0E-025 RC,SI 36.6 105 31 150 10 0.98PTFE-0F-025 KYB 34.0 70 15.5 46.5 40 0.49PTFE-0A-032

32 1 ¼ 27,5 37

TO - 82 4 16 30 0.53PTFE-0B-032 SS 38.4 82 27 140 30 0.82PTFE-0C-032 PB 43.6 82 27 81 30 0.66PTFE-0D-032 SS,RC/FP 42.8 123 27 140 20 1.12PTFE-0E-032 RC,SI 42.8 123 27 140 10 1.12PTFE-0F-032 KYB 43.6 82 13.5 40.5 30 0.57PTFE-0A-040

40 1 ½ 32 42,7

TO - 100 3.5 14 25 0.97PTFE-0B-040 SS 44.6 100 23 120 25 1.50PTFE-0C-040 PB 48.6 100 23 69 25 1.20PTFE-0D-040 SS,RC/FP 55.8 150 23 120 25 1.90PTFE-0E-040 RC,SI 55.8 150 23 120 10 1.90PTFE-0F-040 KYB 48.6 100 11.5 34.5 25 1.05PTFE-0A-050

50 2 43 56,5

TO - 140 3 12 18 1.36PTFE-0B-050 SS 59.0 140 20 100 18 2.10PTFE-0C-050 PB 62.0 140 20 60 18 1.68PTFE-0D-050 SS,RC/FP 68.0 210 20 100 18 2.72PTFE-0E-050 RC,SI 68.0 210 20 100 10 2.72PTFE-0F-050 KYB 62.0 140 10 30 18 1.47PTFE-0A-065

65 2 ½ 54 71

TO - 178 2.5 10 13 1.68PTFE-0B-065 SS 73.0 178 16 70 13 2.58PTFE-0C-065 PB 77.0 178 16 48 13 2.06PTFE-0D-065 SS,RC/FP 79.0 267 16 70 13 3.10PTFE-0E-065 RC,SI 79.0 267 16 70 10 3.10PTFE-0F-065 KYB 77.0 178 8 24 13 1.81PTFE-0A-080

80 3 64 83,6

TO - 230 2 8 10 2.14PTFE-0B-080 SS 86.0 230 14 60 10 3.29PTFE-0C-080 PB 90.0 230 14 42 10 2.63PTFE-0D-080 SS,RC/FP 95.0 345 14 60 10 3.95PTFE-0E-080 RC,SI 95.0 345 14 60 10 3.95PTFE-0F-080 KYB 90.0 230 7 21 10 2.30PTFE-0A-100

100 4 98 123,3

TO - 300 1.5 6 5 3.46PTFE-0B-100 SS 125.0 300 10 40 5 5.33PTFE-0C-100 PB 128.0 300 10 30 5 4.26PTFE-0D-100 SS,RC/FP 131.0 450 10 40 5 6.40PTFE-0E-100 RC,SI 131.0 450 10 40 5 6.40PTFE-0F-100 KYB - - - - - -PTFE-0A-150

150 6 130 161,2

TO - 600 0.75 3 4 6.50PTFE-0B-150 SS 170.0 600 5 20 4 10.00PTFE-0C-150 PB - - - 15 - -PTFE-0D-150 SS,RC/FP 176.0 900 5 20 4 12.00PTFE-0E-150 RC,SI 176.0 900 5 20 4 12.00PTFE-0F-150 KYB - - - - - -

Page 112: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 111 / 120 Catalog HOSES

HYPERLINE VDesign & PurposeHyperline V is designed for use in a wide variety of general purpose industrial applications, such as automotive, steam transfer, refrigeration, and many others. Although Hyperline V is also suitable for some light duty process fluid applications, Corroflon or Bioflex (both available from OPW market) is usually preferred due to the thicker PTFE wall and helical reinforcement.Hyperline V is very flexible and kink resistant, but has a convoluted bore which limits fluid flow rates, and reduces internal “cleanability”. It also requires de-convoluting before assembly.Hyperline FX is the preferred alternative which solves these problems without reducing the flexibility too much.

Hyperline V is available in the following grades:Hyperline V, TO - Natural PTFE Tube Only, no braid.Hyperline V, AS, - Antistatic Black PTFE Tube Only, no braid.Hyperline V, SS - Natural PTFE Tube, external 304 Stainless Steel Braid.Hyperline V, AS, SS - Antistatic PTFE Tube, external 304 Stainless Steel Braid.Hyperline V, PB - To special order, Hyperline V can also be supplied with an orange polypropylene yarn braid

(Hyperline V, PB or Hyperline V, AS, PB).Hyperline V, AS, PB - Special order

NOTE: Prolonged exposure to sunlight eventually results in UV degradation of PB braid. Seamless extruded and convolutednatural or antistatic PTFE tube, with a Stainless Steel 304 (SS) wire braid, or an orange Polypropylene Braid (to special order).

Temperature RatingFor Stainless Steel Braided (SS) hose, the temperature rating is from -70° to +260°C, but the Maximum Working Pressure (MWP) must be reduced by 1% for each 1°C above 130°C. For Polypropylene Braided (PB) hose, the maximum workingpressure reduces by 5% for each °C above 80°C. Maximum Working Temperature = 100°C.

Pressure ResistanceThe Pressure Ratings for SS grades are as listed and adjusted for temperature. Pressure ratings for PB hose grades are 50%of those for SS hose grades. Tube Only (TO) grades can only be used at pressures up to 2 Bar (30 psi).

Vacuum ResistanceSS braided Hyperline V hoses are fully vacuum resistant up to 130°C (266°F).

Flow RatesTurbulent flow always occurs in hoses with rough or convoluted internal surfaces. This reduces flow rates, and can cause a whistling noise if gases are passed at high flow rates. Use Hyperline FX to solve such problems if necessary.

ASSEMBLY Hyperline V can be assembled to hydraulic hose fittings in the normal way after the convolutions have been partially flattenedout by means of a special tool, called a Visiflon Opening Tool,available from OPW market. This tool screws in to the convolutions, either manually or mounted on to an electric motor, and then screws out to leave the convolutions flatter, and able to accept the insertion of a hydraulic fitting.

APPLICATIONS - Automotive and General Industrial - where good flexibility is required for larger bore hose applications.- Hyperline FX is preferred to Hyperline V in all applications except those where the superior flexibility and kink resistance of Hyperline V is required.

HYPERLINE V Size Range and Specefications

NumberDN Type I.D. O.D. wall R min WP BP Weight Length

inch mm mm mm mm bar bar кг m71-100-06-01-02

3/8”SS 6.30 11.94 0.63 20 60 240 0.13 40

71-110-06-01-02 AS,SS 6.30 11.94 0.63 20 60 240 0.13 4071-100-08-01-02

1/2”SS 9.50 15.24 0.63 25 47 190 0.20 40

71-110-08-01-02 AS,SS 9.50 15.24 0.63 25 47 190 0.20 4071-100-10-01-02

5/8”SS 12.70 21.21 0.76 40 40 160 0.25 30

71-110-10-01-02 AS,SS 12.70 21.21 0.76 40 40 160 0.25 3071-100-12-01-02

3/4”SS 16.00 22.71 0.89 50 32 130 0.34 30

71-110-12-01-02 AS,SS 16.00 22.71 0.89 50 32 130 0.34 3071-100-16-01-02

1”SS 22.20 30.58 1.00 63 26 105 0.47 25

71-110-16-01-02 AS,SS 22.20 30.58 1.00 63 26 105 0.47 2571-100-20-01-02

1 ¼”SS 28.20 36.07 1.00 70 25 100 0.63 20

71-110-20-01-02 AS,SS 28.20 36.07 1.00 70 25 100 0.63 2071-100-24-01-02

1 ½”SS 35.00 46.99 1.25 115 20 85 0.90 10

71-110-24-01-02 AS,SS 35.00 46.99 1.25 115 20 85 0.90 1071-100-32-01-02

2”SS 47.00 61.01 1.25 130 15 70 1.25 10

71-110-32-01-02 AS,SS 47.00 61.01 1.25 130 15 70 1.25 10

Page 113: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 112 / 120 Catalog HOSES

18.2. Smothbore PTFE Hose

BIOFLEXBioflex is a smoothbore, highly flexible, PTFE lined hose. Its design overcomes the disadvantages of conventional smoothbore and convoluted PTFE flexible hose designs, dramatically improving on many of their individual technical performance parameters.The key feature of Bioflex PTFE hose is the PTFE liner design,which comprises integral rib sections which support the tube against kinking, vacuum and pressure, and highly compressed web sections which give a smoothbore inner surface and excellent flexibility.Another feature is the integral PTFE lined and flared end fittingdesign (see next page) which is available for all the standard end fittings on Bioflex Hose Assemblies.This provides clean, full-bore flow through the end fitting without any entrapment points - unlike conventional fittings, which introduce a bore restriction, also a crevice at the end of the fitting tail.This PTFE lining also protects the end fitting from any corrosive media passing through the hose bore. Today, Bioflex has become the established standard in process fluids applications all over the world, and continues to be introduced into new applications every day.

Temperature vs PressureDue to its extremely strong construction, Bioflex has outstandingresistance to temperature and pressure, much higher than that ofconventional convoluted PTFE lined hose.

Temperature vs VacuumAll sizes of Bioflex GP,SS and AS, SS are usable at full vacuum up to130°C. Above this, the vacuum resistance should be reduced 1% for every degree above 130°C. Rubber covered grades the same, BUT ONLY within the temperature limits for the type of rubber.Temperature & MWP Graph for Bioflex GP, SS and AS, SS (Subtracted to calculate Pressure Drop over the Hose Length)

Maximum Working Pressure (MWP) Variation with Temperature:Hose with SS Braid as per Graph.Hose with PB Braid, pressure as listed (Page 10) from -30°C to +80°C and 50% less from 80°C to 100°C.Hose with RC, FP and SI grades as per Graph, BUT only within thetemperature range for the particular grade of rubber cover, as given below.

Design & ApprovalsBioflex GP is a virgin PTFE liner, manufactured from hose grade PTFE which conforms to the requirements of:FDA 21 CFR 177.1550 Bioflex GP hose liner tube has also been tested, and complieswith:USP Class 6 :- Systemic Injection Test- Intracutaneous Test- Intramuscular Test- USP L929 MEM Elution Test (Cytotoxicity)

Maximum Operating Temperatures (Internal Fluid Only):SS -70°C to +260°CPB -30°C to +100°CSS,RC & SS, FP -40°C to +140°CSS, SI -40°C to +180°CKYB -40°C to +120°C

Page 114: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 113 / 120 Catalog HOSES

Tube

GP – SS 316 AS - Antistatic

Braids

SS PB - Polypropylene

KYB - Kynar TO - Tube

HB - Hastelloy

Rubber Cover on Braid

RC – RubberCover SI - Silicone

FP - Fireproof RC-300 - Rubber Covered 300mm at End

Protection

PC - Protection Coil SR - Scuff Rings

KR - Kink Resistant

Fittings

Фланци. PN6, PN10, ASA 150lbs

DIN 11851 maleDIN 11851 female

KAMLOK adapter KAMLOK coupler

Triclover not PTFE lined

Triclover PTFE lined

SMS RJT

Page 115: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 114 / 120 Catalog HOSES

BIOFLEX Size Range and Specefications Number

ID Actual Bore Size

O/D of Tube Braid type

O/D of Braid or Rubber R min WP BP Max hose

Length Weight

mm inch mm mm mm mm bar bar m Kg BIOF-0A-010

10 3/8” 9,5 11,96 TO - 35 5 20 20 .06

BIOF-0B-010 SS 12.83 20 80 320 20 .14 BIOF-0D-010 RC 17.40 18 80 320 18 .22 BIOF-0A-015

15 ½ 12.7 15.49

TO - 60 5 20 20 .15 BIOF-0B-015 SS 16.6 38 70 280 20 .29 BIOF-0C-015 PB 19.5 38 35 140 20 .22 BIOF-0D-015 SS,RC/FP 21.0 60 70 280 18 .39 BIOF-0E-015 SI 21.0 60 70 280 18 .39 BIOF-0F-015 KYB 17.5 60 10 40 20 .19 BIOF-0A-016

16 5/8 16,0 19.40

TO 20.6 68 5 20 20 .17 BIOF-0B-016 SS 23.3 45 65 260 20 .35 BIOF-0C-016 PB 25.0 45 33 130 20 .25 BIOF-0D-016 SS,RC/FP 25.0 68 65 260 18 .47 BIOF-0E-016 SI 21.5 68 65 260 18 .47 BIOF-0F-016 KYB 20.6 68 10 40 20 .20 BIOF-0A-020

20 ¾ 19,0 23,20

TO 24.5 75 5 20 20 .20 BIOF-0B-020 SS 27.9 50 60 240 20 .40 BIOF-0C-020 PB 30.4 50 30 120 20 .28 BIOF-0D-020 SS,RC/FP 30.4 75 60 240 18 .55 BIOF-0E-020 SI 26.0 75 60 240 18 .55 BIOF-0F-020 KYB 24.5 75 10 40 20 .24 BIOF-0A-022

22 7/8 22,0 22,70

TO - 92.5 4 16 20 .28 BIOF-0B-022 SS 28.2 60 55 220 20 .52 BIOF-0C-022 PB 32.0 60 27.5 110 20 .38 BIOF-0D-022 SS,RC/FP 33.2 92.5 55 220 18 .74 BIOF-0E-022 SI 33.2 92.5 55 220 18 .74 BIOF-0F-022 KYB 29.7 92.5 10 40 20 .33 BIOF-0A-025

25 1 25,4 31,00

TO - 110 4 16 20 .36 BIOF-0B-025 SS 32.3 70 50 200 20 .63 BIOF-0C-025 PB 37.7 70 25 100 20 .47 BIOF-0D-025 SS,RC/FP 37.3 110 50 200 18 .92 BIOF-0E-025 SI 37.3 110 50 200 18 .92 BIOF-0F-025 KYB 33.4 110 10 30 20 .41 BIOF-0A-032

32 1 ¼ 32,0 37,3

TO - 140 3 12 20 .45 BIOF-0B-032 SS 39.5 100 45 180 20 .85 BIOF-0C-032 PB 44.3 100 23 90 20 .72 BIOF-0D-032 SS,RC/FP 44.5 140 45 180 18 1.15 BIOF-0E-032 SI 44.5 140 45 180 18 1.15 BIOF-0F-032 KYB 39.7 140 6 24 20 .53 BIOF-0A-035

35 1 3/8 34,9 41,20

TO - 160 2 8 18 .54 BIOF-0B-035 SS 43.1 120 40 160 18 1.00 BIOF-0C-035 PB 47.8 120 20 80 18 .86 BIOF-0D-035 SS,RC/FP 48.1 160 40 160 16 1.38 BIOF-0E-035 SI 48.1 160 40 160 16 1.38 BIOF-0F-035 KYB 42.9 160 6 20 18 .68 BIOF-0A-040

40 1 ½ 38,0 45,00

TO - 180 2 8 17 .66 BIOF-0B-040 SS 47.0 140 40 160 17 1.10 BIOF-0C-040 PB 50.8 140 20 80 17 .90 BIOF-0D-040 SS,RC/FP 52.0 180 40 160 15 1.55 BIOF-0E-040 SI 52.0 180 40 160 15 1.55 BIOF-0F-040 KYB 47.7 180 6 20 17 .78 BIOF-0A-048

48 17/8 47.6 55.20

TO - 280 2 8 13 .82 BIOF-0B-048 SS 57.1 190 35 140 13 1.38 BIOF-0C-048 PB 62.0 190 18 72 13 1.12 BIOF-0D-048 SS,RC/FP 62.1 280 35 140 11 1.94 BIOF-0E-048 SI 62.1 280 35 140 11 1.94 BIOF-0F-048 KYB 57.3 280 6 16 13 .97 BIOF-0A-050

50 2 50,8 59,10

TO - 300 2 8 10 1.25 BIOF-0B-050 SS 61.0 200 30 120 10 1.90 BIOF-0C-050 PB 66.0 200 15 60 10 1.60 BIOF-0D-050 SS,RC/FP 66.0 300 30 120 88 2.56 BIOF-0E-050 SI 66.0 300 30 120 10 2.56 BIOF-0F-050 KYB 61.7 300 6 12 10 1.42

Page 116: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 115 / 120 Catalog HOSES

HYPERLINE SBDesign & PurposeHyperline SB is a smoothbore, medium wall premium grade, seamless extruded PTFE Tube with a Grade 304 Stainless Steel Wire Braid. The choice of the PTFE polymer, together with the extrusion, heat treatment and quality control programmes, is designed to produce the best quality PTFE tube possible, ensuring minimumpermeation and maximum flexibility.This range of Hyperline SB PTFE hose has been developed for general purpose use.Hyperline SB has a smooth bore, permitting fast, clean fluid flow, but is limited in flexibility and kink resistance, particularly in bore sizes above 1/4”. For flexibility Hyperline V is preferred. For flexibility and flow, Hyperline FX is preferred.

Hyperline SB is available in the following grade:Hyperline SB, SS - Natural PTFE Tube, external 304 Stainless Steel Wire Braid.Hyperline SB, AS, SS - Antistatic (AS) grade PTFE liner tube Hyperline SB, DB - Double Braid of Stainless Steel Wire (Hyperline SB, DB).

Temperature RatingThe temperature rating is from -70° to +260°C, but the Maximum Working Pressure (MWP) must be reduced by 0.5% for each 1°C above 130°C.

Pressure ResistanceThe Pressure Ratings are as listed and adjusted for temperature, for the Stainless Steel grades. If higher working pressures are required, a double braid hose can be requested, to special order.

Full Vacuum ResistanceHyperline SB is not designed for vacuum resistance, and Hyperline FX is more suitable for such applications. The smaller sizes of Hyperline SB may be fully or partly vacuum resistant, dependent upon the application conditions.

Diffusion ResistanceHyperline SB is not designed for High Pressure Gas applications (above 140 Bar or 2000 psi). A specially processed hose design is required. For advice, consult OPW market.

ASSEMBLYAssembly of Hyperline SB to standard Hydraulic End Fittings,together with Ferrules supplied by OPW market is straightforward

APPLICATIONSAutomotive, motorsport, refrigeration, high pressure steam, and many other industrial applications in general, wherever the excellent chemical resistance and temperature resistance of the hose are required.

CAUTION

Hyperline SB can be “kinked” if care is not taken, particularly sizes 1/2” and above. If this is a problem, use Hyperline FX or Hyperline V.

HYPERLINE SB Size range and Specifications

NumberSize Type DN PTFE

thickness O.D. Rmin WP Weight Max

lengthinch mm mm mm mm bar кг m

70-400-03-01-023/16”

SS 5.0 0.76 7.65 45 230 0.078 120070-410-03-01-02 AS,SS 5.0 0.76 7.65 45 230 0.078 120070-400-04-01-02

1/4”SS 6.7 0.76 9.30 60 205 0.110 800

70-410-04-01-02 AS,SS 6.7 0.76 9.30 60 205 0.110 80070-400-05-01-02

5/16”SS 8.5 0.76 11.10 70 180 0.136 600

70-410-05-01-02 AS,SS 8.5 0.76 11.10 70 180 0.136 60070-400-06-01-02

3/8”SS 10.0 0.76 12.75 80 180 0.166 400

70-410-06-01-02 AS,SS 10.0 0.76 12.75 80 180 0.166 40070-400-08-01-02

1/2”SS 13.6 0.76 16.35 130 140 0.210 220

70-410-08-01-02 AS,SS 13.6 0.76 16.35 130 140 0.210 22070-400-10-01-02

5/8”SS 16.6 0.84 19.50 163 110 0.280 200

70-410-10-01-02 AS,SS 16.6 0.84 19.50 163 110 0.280 20070-400-12-01-02

3/4”SS 19.8 1.00 22.50 180 95 0.327 -

70-410-12-01-02 AS,SS 19.8 1.00 22.50 180 95 0.327 -70-400-16-01-02

1”SS 26.4 1.00 30.10 230 80 0.524 -

70-410-16-01-02 AS,SS 26.4 1.00 30.10 230 80 0.524 -

Page 117: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 116 / 120 Catalog HOSES

HYPERLINE FXOur revolutionary new product. A natural or *antistatic PTFE tube with asmooth bore, but externally convoluted. Supplied with a Stainless Steel (SS) wire braid or a Black Polyaramid Fibre braid (AM).

Design & PurposeHyperline FX is unlike any other PTFE hose product currently available.The PTFE liner tube is smooth bore on the inside but convoluted on the outside, to combine the ease of assembly and high flow rates of a smooth bore hose with the flexibility and kink resistance of a convoluted hose in one product!Hyperline FX is designed to be used in place of Smoothbore Hose when improved flexibility is required, and to replace Convoluted Hose when improved flow characteristics or easier assembly is required.

Hyperline FX is available in the following grades:Hyperline FX, TO - Natural PTFE Tube Only, no braid.Hyperline FX, AS, TO - Antistatic Black PTFE Tube Only, no braid.Hyperline FX, SS - Natural PTFE Tube external 304 Stainless Steel Braid.Hyperline FX, AS, SS - Antistatic Black PTFE Tube, external 304 Stainless Steel Braid.Hyperline FX, AM - Natural PTFE Tube, Polyaramid Fibre Braid.Hyperline FX, AS, AM - Antistatic Black PTFE Tube, Polyaramid Fibre Braid.Hyperline FX special order - Hyperline FX can also be supplied with a Polypropylene Braid, or with a Stainless Steel

braid with an EPDM or Silicone Rubber Cover, or a PVC, Nylon or other Plastic Cover, printed if required.

PROPERTIESTemperature RatingThe temperature rating is from -70° to +260°C, but the Maximum Working Pressure (MWP) must be reduced by 1% for each 1°C above 130°C. The maximum working temperature for the Polyaramid Fibre braided hose is +180ºC.

Pressure ResistanceThe maximum working pressures are as listed, up to 130°C (266°F). The design of a conventional autoconvoluted PTFE hose liner permits internal “pressing out” of the convolutions inside the braid over time, and under temperature and pressure, leading to premature failures. The narrow and highly compressed web sections of Hyperline FX are much more resistant to pressing out, hence a much longer service life under pressure can beachieved. Tube Only grades can only be used at pressures up to 4 Bar (60 psi) up to 130°C (266°F) and are not fully vacuum resistant.

Full Vacuum ResistanceStainless Steel braided Hyperline FX hose is fully vacuum resistant up to 130°C .

Reduced Diffusion RatesThe way the Hyperline FX tube liner is made, by web compression without fracture, surprisingly generates a muchimproved resistance to gas permeation, compared to any other type of smooth bore or convoluted PTFE hose. Much lower diffusion rates can therefore be achieved.

Excellent Flow RatesDue to the non-turbulent flow through a smooth bore hose, Hyperline FX flow rates for a given pressure drop and actual bore size are 2 to 3 times higher than for a convoluted PTFE hose. (This applies to the hose itself. If end fittings are applied,however, which introduce a smaller bore at the ends, this multiple is reduced). The “whistling” noises created by the turbulent flow of gases or steam through convoluted hose are eliminated in Hyperline FX.

Excellent Internal CleanabilityInternal cleanliness and self-drainability are optimised by the smooth bore design. This eliminates ‘pockets’ of fluid trapped in internal convolutions when using convoluted hose.

Conventional hydraulic hose tail end fittings.Problems associated with assembling fittings to convoluted hoses, such as leakages, the need for special or sleeved spigots, the need to de-convolute etc disappear – Hyperline FX is literally as easy to assemble as any smooth bore hose. Details concerning the Assembly Instructions.

APPLICATIONS- Automotive and Motorsport - replacing conventional PTFE hoses in ESP systems, fuel systems, braking systems and oillines.- Refrigeration : refrigerant feed lines to freezer plates, where the high resistance to permeation, together with the flexibilityand chemical resistance, are primary advantages.

Page 118: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 117 / 120 Catalog HOSES

- Steam and Gas Lines : where the smooth bore ensures nonturbulent gas flow, leading to noise free operation at higher flow rates, and longer service life.- Industrial applications in general where the ease of assembly to end fittings together with the higher flow rates, chemical and temperature resistance and resistance to permeation make Hyperline FX the optimum choice.- Not suitable for use in applications requiring PTFE Lined and Flared End Fittings - for such applications only Bioflex issuitable.

HYPERLINE FX Specifications

NumberSize

TypeI.D. O.D. O.D.

of braid R min WP BP

inch mm mm mm mm bar bar92-100-04-01-02

1/4”

SS 6.8 9.00 9.6 19 88 58092-110-04-01-02 SS,AS 6.8 9.00 9.6 19 88 58092-100-04-01-02 AM 6.8 9.00 9.6 38 62 58092-110-04-01-02 AM,AS 6.8 9.00 9.6 38 62 58092-100-06-01-02

3/8”

SS 10.0 12.50 13.5 25 80 52092-110-06-01-02 SS,AS 10.0 12.50 13.5 25 80 52092-100-06-01-02 AM 10.0 12.50 13.5 50 56 52092-110-06-01-02 AM,AS 10.0 12.50 13.5 50 56 52092-100-08-01-02

1/2”

SS 13.6 16.28 17.5 32 60 38092-110-08-01-02 SS,AS 13.6 16.28 17.5 32 60 38092-100-08-01-02 AM 13.6 16.28 17.5 64 42 38092-110-08-01-02 AM,AS 13.6 16.28 17.5 64 42 38092-100-10-01-02

5/8”

SS 16.7 20.00 21.0 50 50 36092-110-10-01-02 SS,AS 16.7 20.00 21.0 50 50 36092-100-10-01-02 AM 16.7 20.00 21.0 100 35 36092-110-10-01-02 AM,AS 16.7 20.00 21.0 100 35 36092-100-12-01-02

3/4”

SS 19.8 23.20 24.1 60 42 35092-110-12-01-02 SS,AS 19.8 23.20 24.1 60 42 35092-100-12-01-02 AM 19.8 23.20 24.1 120 29 35092-110-12-01-02 AM,AS 19.8 23.20 24.1 120 29 35092-100-16-01-02

1”

SS 26.4 30.30 31.3 73 40 26092-110-16-01-02 SS,AS 26.4 30.30 31.3 73 40 26092-100-16-01-02 AM 26.4 30.30 31.3 146 28 26092-110-16-01-02 AM,AS 26.4 30.30 31.3 146 28 260

SMOOTHBORETemperature: от -70°C до +260°C, depending of brade

Hose constructionTube: гладкостенна PTFE, направена само от Teflon 62 или Fluon CD086 PTFE полимери. Избора на тези материали заедно с пресоването, горещата обработка и качествения контрол позволяват най-високото качество PTFE маркучи с минимални шупли и висока еластичностОплетка: От неръждаема стомана 304, издържаща на минимум 1700 N/mm2 усилие на опън.

HOSE PROPERTIESTemperature Resistance: PTFE hose is usable from -70°C up to +260°C, dependent upon the braid and the working pressure (see Specifications).Chemical Resistance: PTFE is the most chemically resistant material known, and is only affected by a small number of very uncommon chemicals; Fluorine Gas, boiling Alkali Metals, Chlorine Trifluoride and Oxygen Difluoride.Flexibility with Strength: Smoothbore PTFE hose has excellent dynamic flex life, and performs well at high pressures in flexing or vibrating applications.Self Cleaning: The famous non-stick nature of PTFE ensures that material passing through does not become ‘hung up’ inside the hose, creating the risk of bacterial growth, or contamination. The hose, therefore, is effectively self-cleaning.

NumberSize wall ID OD R min WP WeightInch mm min max min max mm Bar Kg

70-100-02-01-02 1/8 0.76 3.00 3.20 5.70 6.00 22 290 .06570-100-03-01-02 3/16 0.76 4.60 4.75 7.30 7.50 40 265 .08070-100-04-01-02 ¼ 0.63 6.00 6.50 8.30 8.70 60 240 .09370-100-05-01-02 5/16 0.63 7.50 8.00 9.80 10.50 70 200 .11070-100-06-01-02 3/8 0.63 9.10 9.60 11.50 12.00 80 190 .12470-100-08-01-02 ½ 0.76 11.90 12.80 14.50 15.40 110 150 .20770-100-10-01-02 5/8 0.76 15.00 16.00 17.80 18.90 150 110 .25570-100-12-01-02 ¾ 0.76 18.00 19.20 21.00 22.30 200 80 .31570-100-16-01-02 1 1.00 24.00 25.40 27.60 28.70 300 55 .430

For antistatic grade 110 instead 100.

Page 119: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 118 / 120 Catalog HOSES

18.3. PHARMACEPHTICAL

PHARMALEXPharmalex is a very flexible, patented smoothbore PTFE lined hose product with a clear silicone rubber cover. It is designed to replace conventional all-silicone rubber hoses in light duty applications.

ALTERNATIVE PRODUCTSFor heaving duty applications, particularly where high pressures are used, Pharmaline Hose (Leaflet available) is the preferred option. Pharmaline includes a SS wire braid on the tube, with a white Silicone Rubber outercover.

HOSE TYPES, DESIGNS & APPROVALSPharmalex GP has a PTFE hose liner tube, manufactured from PTFE material in accordance with FDA requirement 21 CFR 177.1550.An antistatic PTFE option is also available, Pharmalex AS, using liner material in accordance with the FDA requirement 21 CFR 178.3297.Both Pharmalex GP and Pharmalex AS have been tested and the PTFE liners comply with USP Class VI, including the Elution (Cytotoxicity) test.Both include a Platinum Cured clear (transparent) silicone rubber cover (Post-cured 4 hours at 200°C in accordance with requirements for USP Class VI). The Silicone Rubber material is in accordance with FDA requirement CFR-177-2600.ATEX - Attestations of Conformity and Labelling Available for the Pharmalex range of hose and hose assemblies and include the following designation: II 2 G D c CERT. NO: SIRA 06ATEX6064U - for components intended for use in Gas:Zones 1 & 2 and Dust: Zones 21 & 22 Potentially Explosive Atmospheres – Directive 94/9/EC.

PROPERTIES- Temperature Range: -60°C (-80°F) to +200°C (+400°F).- Pressure vs Temperature - Pressure ratings are as listed up to 130°C, then reducing at 1% per 1°C up to +200°C .- Vacuum - All sizes are fully vacuum resistant up to 100°C.

FURTHER TECHNICAL INFORMATIONFurther technical information related to PTFE material, Antistatic specifications, usage requirements and limitations, testing and flow rates etc. is available in the Bioflex Information pages on the OPW market website, and must be reviewed in conjunction with this leaflet to determine usage limitations.

CRIMPED END FITTINGS_ Sanitary and Mini Sanitary Triclamp (Triclover) Fittings in 316 SS, with bores electropolishged to <0.375μm (<15μin)._ I-Line Fittings, Compression Fittings, BSPT & NPT Male, Flanges, Camlocks, DIN118511, RJT, SMS, RJP and others to special order.

RELINK END FITTINGS“Relink” Self Assembly, Re-usable end fittings are also available as above. These can be assembled and disassembled by theCustomer, and are to a Patented Design. The purchase of a Relink Hand press is required, and further information is available on the Relink leaflet on the OPW market website.

Secection of PHARMALEXНомер

DN I.D. O.D. R мин WP BP Теглоinch mm mm mm mm bar bar kg

PHX-06 1/4 6.4 6.8 11.6 30 7.5 30 0.09PHX-10 3/8 9.5 9.5 15.5 38 6.0 24 0.14PHX-13 1/2 12.7 12.7 19.5 63 5.8 23 0.21PHX-16 5/8 16.0 16.0 24.5 75 5 20 0.27PHX-19 3/4 19.0 19.0 26.4 100 4.3 17 0.32PHX-25 1 25.4 25.4 34.8 150 3.5 14 0.49

Page 120: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 119 / 120 Catalog HOSES

PHARMALINEHOSE TYPES, DESIGNS & APPROVALSPharmaline GP has a PTFE hose liner tube, manufactured from PTFE material in accordance with FDA requirement 21 CFR 177.1550. An antistatic PTFE option is also available, Pharmaline AS, using liner material in accordance with the FDA requirement 21 CFR 178.3297.Both Pharmaline GP and Pharmaline AS have been tested and the PTFE liners comply with USP Class VI, including the Elution (Cytotoxicity) test.Both include grade 304 SS wire Braid, and a Platinium Cured white silicone rubber cover (Postcured 4 hours at 200°C in accordance with requirements for USP Class VI). The Silicone Rubber material is in accordance with FDA requirement CFR- 177-2600.ATEX - Attestations of Conformity and Labelling are available for the Pharmaline range of hose and hose assemblies.

PROPERTIES- Temperature Range: -60°C (-80°F) to +200°C (+400°F).- Pressure vs Temperature - Pressure ratings are as listed up to 130°C ( 266°F), then reducing at 1% per 1°C (1.8°F) up to +200°C (400°F).- Vacuum - All sizes fully vacuum resistant up to 130°C.

FURTHER TECHNICAL INFORMATIONFurther technical information related to PTFE material, Antistatic specifications, usage requirements and limitations, testing and flow rates etc. is available in the Bioflex Product Information pages on the OPW market website.

CRIMPED END FITTINGS- Sanitary and Mini Sanitary Triclamp (Triclover) Fittings in 316 SS, with bores electropolished to <0.375μm (<15μin).- I-Line Fittings, Compression Fittings, BSPT & NPT Male, Flanges, Camlocks, DIN11851, RJT, SMS, RJP and others are also available to special order.

RELINK END FITTINGS“Relink” Self Assembly, Re-usable end fittings are also available for end fitting types as listed above. These can be assembled and disassembled by the Customer, and are to a Patented Design. The purchase of a Relink Hand press is required, andfurther information is available on the Relink leaflet on the Dais’s website. Available for use with hose up to 1” - 25.4mm

Selection of PHARMALINEНомер

DN I.D. O.D. R мин WP BP Теглоinch Mm mm mm mm bar bar kg

PHL-06 1/4 6.4 6.8 11.6 19 130 520 0.17PHL-10 3/8 9.5 9.5 15.5 25 100 400 0.22PHL-13 1/2 12.7 12.7 19.5 38 70 280 0.37PHL-19 3/4 19.0 19.0 27.3 63 60 240 0.65PHL-16 5/8 16.0 16.0 24.4 50 65 260 0.52PHL-25 1 25.4 25.4 34.8 100 50 200 0.88PHL-38 11/2 38.0 38.8 51.7 170 38 158 1.698PHL-50 2 50.0 51.5 65.7 210 28 123 2.355

Page 121: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify

Page 120 / 120 Catalog HOSES

XIX. Other equipment from DAIS

Fittings Safety couplings Ducting hoses

Fuel service stations Domestic stations for diesel and AdBlue

Industrial equipment

Tank truck equipment

Page 122: Table of Contents - hoses-global.com · 3e - environment conditions (cover resistance) 3e. 1 - abrasion 3e. 2 – petroleum based fluids (specify the name) 3e. 3 - solvents (specify