STEEL PLATE PROCESSING PLANT CLOSINGFeaturing: (2) Large Cap. CNC Flame Cutting Machines each w/BURNY 10 LCD Plus Controls; (2) FEMCO CNC Mdl. BMC110R2 Table-Type Horiz. Boring

Mills; Ironworker; Welding Machines; (4) Stress Relieving Units; (2) Engine Lathes; Vert. Turret Mill; Rolling Drawer Tool Cabinets; Tooling;

(3) Air Compressors up to 75 HP; (4) Forklifts Incl. TAYLOR 30,000-Lb. Cap. Diesel & TOYOTA 9,000-Lb. Cap. Diesel; Scissor-Type Manlift;

I.H. 24' Flatbed Truck; 48' Float-Type Trailer; (8) Column Mounted Jib Cranes, Up to 3 T. Cap. (2) 38" Crane Magnets; Much More!

LONGHORN STEEL & FLAMECUTTING, INC.

12229 FM 529HOUSTON, TEXAS 77041

(See Directions on Back Page)

AUCTION: THURSDAY,

SEPTEMBER 15 10:00 A.M.

INSPECTION: Wednesday,

September 14, 9:00 A.M. to

4:00 P.M. & Morning of Sale

BUYER’S PREMIUM: 15% ON-SITE

18% WEBCAST

<(1 OF 2) CNC FLAME CUTTING MACHINES

>FEMCO CNC TABLE-TYPE

HORIZ. BORING MILL

AUCTION

CNC CNC

2008

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

>(1 OF 2) 38"

CRANE MAGNETS

<SAMPLE VIEW OF STRESS RELIEVING UNITS

>LINCOLN

IDEALARC MDL.

DC1000 WELDING MACHINE

<TAYLOR 30,000-LB. DIESEL FORKLIFT

>24'

FREIGHTLINER FLATBED

TRUCK

Read Partial Terms and

Conditions on Last Page

of Brochure

On-Site Bidding in Houston, Texas or Bid Via Webcast at

,

2KOIKE MDL. IK-12MAX3 TRACK TORCH

CNC FLAME CUTTING MACHINES

SECTOR TECHNOLOGIES 23 X 45 MDL. ST100, Burny 10 LCD Plus CNC control, (10) oxy. fuel cutting heads w/motorized torch holders, approx. 23' max. cutting width, approx. 45' max. cutting length, (2) metal slatted burning tbls., S/N 1172-0610-100-312.

LINDE 18 X 40 MDL. OM-10022, Burny 10 LCD Plus CNC control, (8) oxy. fuel cutting heads w/motorized torch holders, (2) master and (6) slave carriages, 18' max. cutting width, approx. 40' max. cutting length, (2) steel slatted burning tbls., S/N 1415.

SECTOR TECHNOLOGIES 23 X 45 CNC FLAME CUTTING MACHINE

LINDE 18 X 40 CNC FLAME CUTTING MACHINE

>BURNY 10 LCD

PLUS CNC CONTROL

LONGHORN STEEL &

FLAMECUTTING, INC.12229 FM 529

HOUSTON, TEXAS 77041(See Directions on Back Page)

AUCTION: THURSDAY, SEPTEMBER 15 • 10:00 A.M.

<UNI-HYDRO 66 T. CAP. IRONWORKER

>150 T.

HYDRAULIC C-FRAME

PRESS

HYDRAULIC FLANGE PUNCH

FABRILINE 100 T. CAP.

HYDRAULIC C-FRAME PRESS

CUSTOM APPROX. 150 T. CAP., foot pedal control, 38 x 48-1/2 x 4" steel bolster, assorted straightening blocks, unitized hyd. unit.

TRACK TORCHKOIKE MDL. IK-12MAX3, oxy. fuel cutting head on extended arm, assorted track.

IRONWORKERUNI-HYDRO 66 T. CAP., 4" x 4" x 1/2" angle shear, 1/2" x 12" plate shear, S/N N.A.

AUCTION

CNC

CNC

3

3

On-Site Bidding in Houston, Texas or Bid Via Webcast at

,,

LINCOLN SUB-ARC WELDING TRACTOR

<LINCOLN IDEALARC MDL. DC1000 WELDING MACHINE

>1,000 AMP POWER SOURCES

AND FLUX HEATER BOXES

PRESTON EASTON WELDING POSITIONER

SAMPLE VIEW OF MILLER MIG WELDERS

SAMPLE VIEW OF MILLER MIG WELDERS

MIG WELDERS(7) MILLER DELTAWELD MDL. 452, 450 amps @ 38 v., 100% duty cycle, S/N LH320065C, S/N LH360132C, S/N LH330068C, S/N LH320063C, S/N LH330070C, S/N LH300256C, S/N LH300261C.

(2) MILLER DELTAWELD MDL. 451, 450 amps @ 38 v., 100% duty cycle, S/N KE621069, S/N KD439857.

(2) MILLER DELTAWELD MDL. 450, 450 amps @ 38 v., 100% duty cycle, S/N JG80610, S/N JH201701.

WELDING MACHINES(2) LINCOLN IDEALARC MDL. DC1000, 1,000 amps @ 44 v., 100% duty cycle, S/N U1951113028, S/N U1080902113.

MILLER DIMENSION MDL. 652, 650 amps @ 44 v., 100% duty cycle, S/N LB271514.

ARC WELDERLINDE MDL. CAC1001, 1,000 amp cap., S/N N.A.

WIRE FEEDERSMILLER MDL. S54D; (5) MILLER MDL. 70 SERIES; MILLER MDL. 22A.

SUB-ARC WELDING TRACTORLINCOLN MDL. LT7, flux box, controls, (4) 6' track sections.

WELDING POSITIONERPRESTON EASTIN 500-LB. CAP. MDL. PA5MT, 500-lb. cap. @ 4" L.C., 21" dia. rd. platen, bench mtd., fixed height w/foot pedal control, S/N PA5-62.

FLUX HEATER BOXES(2) KEEF MDL. KF-100A, 500-watt, on roller stand, S/N 808302, S/N 60801C.

MISC. WELDING SUPPORT EQUIPMENT(3) PORTABLE INVINCIBLE FLUX VACUUMS.

STRESS RELIEVING UNITS(2) COOPERHEAT INDUCTION, assorted cables.

(2) PDS BARTECH PORTABLE.

LONGHORN STEEL & FLAMECUTTING, INC.

12229 FM 529HOUSTON, TEXAS 77041

(See Directions on Back Page)INSPECTION: Wednesday, September 14, 9:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION: THURSDAY, SEPTEMBER 15 • 10:00 A.M.

AUCTION

BUYER’S PREMIUM: 15% ON-SITE18% WEBCAST

4

CNC TABLE-TYPE HORIZONTAL BORING MILLS(2) FEMCO MDL. BMC110R2, new 12/2008, Fanuc 21i-MB CNC control, 56-1/2" x 63" built-in rotary tbl., CAT-50 spndl. taper, S/N B780411 w/60-pos. ATC (12/2008), S/N B755078 w/52-pos. ATC (11/2005).

BORING MILL WORK SUPPORT FIXTURES(2) FABRICATED STEEL BORING MILL FIXTURES, each consisting of (3) drilled vert. uprights that are 10" x 87"H. dual sided w/heavy steel bracing; MISC. ANGLE BRACKET SETS; RISER BLOCKS; MORE.

GAP BED ENGINE LATHEJET 24" X 120" MDL. 24120S, steadyrest, spds.: 25–1,500 RPM, 2-3/4" spndl. hole, 12" dia. 3-jaw chuck, 16" dia. 4-jaw chuck, S/N 81412311.

ENGINE LATHELODGE & SHIPLEY 27" X 96", spds.: 7–298 RPM, 2" spndl. hole, taper attach., 20" dia. 4-jaw chuck, S/N 32099.

VERTICAL TURRET LATHENILES MDL. CKE1450, 5-pos. turret, 55" built-in 4-jaw chuck, 22 kW drive motor, spds.: 2.5–60 RPM, approx. 36" max. ht. under rail, S/N K15980.

VERTICAL TURRET MILLKINGSTON MDL. KMT-4V, new 2005, 10" x 50" tbl., Newall 2-axis D.R.O., variable spds.: 60–4,200 RPM, 3 HP motor, (3) pwr. feed units, S/N 11682.

CUTTING TOOLSDRILLS; CARBIDE TURNING INSERTS; SPADE DRILLS; INTER-CHANGEABLE SPADES; TAPER SHANK DRILLS; CARBIDE ENDMILLS; INDEXABLE ENDMILLS; EXTENDED LENGTH DRILLS; NATIONAL FINE AND CORSE TAPS in many sizes; MORE.

COMBINATION BELT & DISC SANDERDELTA MDL. 31-300, new 2008, 6" belt, 12" disc, fabricated steel stand, S/N N.A.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT

POWER TOOLS; SHOP FANS; WORK TBLS.; PICNIC TBLS.; TOOLBOXES; PORTABLE SHOP HEATERS; FLOOR PAINT STRIPER; LADDERS; MORE.

JET 24" X 120" GAP BED ENGINE LATHE

NILES 66" VERT. TURRET LATHE

KINGSTON VERT. TURRET MILL

BORING MILL WORK SUPPORT FIXTURE

FEMCO CNC TABLE-TYPE HORIZ. BORING MILL

FEMCO CNC TABLE-TYPE HORIZ. BORING MILL

On-Site Bidding in Houston, Texas or Bid

Via Webcast at

INSPECTION: Wednesday, September 14,9:00 A.M. to 4:00 P.M. & Morning of Sale

CNC CNC

2005

2005

2008

5

> (1 OF 2)

38" CRANE MAGNETS

TOYOTA 9,150-LB. CAP. DIESEL FORKLIFTTAYLOR 30,000-LB. CAP. DIESEL FORKLIFT

<(1 OF 2) TOYOTA 7,300-LB. CAP. DIESEL FORKLIFTS

>YALE 3,000-LB. CAP. FORKLIFT

LONGHORN STEEL & FLAMECUTTING, INC.12229 FM 529, HOUSTON, TEXAS 77041

NEW2003

FORKLIFTSTAYLOR 30,000-LB. CAP. MDL. TE-300M, diesel engine, 18,765-lb. cap. @ 48" load center, 26,404-lb. cap. @ 24" load center, 132" max. lift, 8' forks, side shift, dual front pneumatic tires, air brakes, S/N S-H6-20735.

TOYOTA 9,150-LB. CAP. MDL. 7FDU45, Toyota diesel engine, 9,150-lb. cap. @ 24" L.C., 142" max. lift, 60" forks, side shift, dual front cushion tires, S/N 70476.

(2) TOYOTA 7,300-LB. CAP. MDL. 7FDU35, Mdl. 15Z diesel engine, 7,300-lb. cap. @ 24" L.C., 147-1/2" lift, 52" forks, cushion tires, side shift, S/N 70080, S/N N.A.

YALE 3,000-LB. CAP. MDL. GLP030, new 2003, LPG, 62" standard mast, 90" lift height, pneumatic tires, 42" forks, S/N A810N02914A.

HYSTER 3,000-LB. CAP. MDL. H30XM, new 2003, LPG, 62" standard mast, 90" lift height, pneumatic tires, 42" forks, S/N E001H2494A.

COLUMN MOUNTED JIB CRANES

(8) 1/2 T. CAP. TO 3 T. CAP., 16' reach, some w/elec. chain hoists.

CRANE MAGNETS(2) MILL MASTER 38", National Electric coil, elec. pwrd. from crane.

SPREADER BAR7,700-LB. CAP., approx. 8' overall length, unrated cap.

MATERIAL STORAGE & HANDLING EQUIPMENT

(5) LISTA 12-ROLLER DRAWER STORAGE CABI-NETS; LISTA 7-ROLLER DRAWER STORAGE CABI-NET; LARGE AMOUNT OF V-REST AND ROLLER-REST PIPE STANDS; H.D. WELDING TBLS. up to 2" thk. tops in rd. and rect. sizes; SHACKLES; FORGED C-CLAMPS; EXTRA HEAVY PLATE GRABS up to 2" cap.; WELD HOSE; ADJUSTABLE PALLET RACK-ING; HEAVY-DUTY SHELVING; MORE.

(1 OF 8) COLUMN MOUNTED JIB CRANES

AUCTION

QS-0033537

(1 OF 2) SULLAIR 75 HP AIR COMPRESSORS SULLAIR 60 HP AIR COMPRESSOR

FLATBED TRUCK1998 FREIGHTLINER MDL. FB2496, 25,500-lb. G.V.W.R., Caterpillar Mdl. 3126 diesel engine, manual trans., 24' diamond plate steel deck w/toolboxes, stake pockets and rub rails, ODO: 52,886 miles, TX Lic. No. DKL1553, VIN 1FV3GJFC3HA55755.

FLATBED TRAILERLUFKIN 48' MDL. LM80ST, tandem-axle, steel and wood deck, side boxes, stake pockets and rub rails, TX Lic. No. W83593, VIN 1L01B-4527N1097555.

ROTARY SCREW AIR COMPRESSORS

(2) SULLAIR MDL. 16-75H, 75 HP motor, S/N 00351521, S/N 00351055.

SULLAIR S-ENERGY MDL. 4509/A, 60 HP motor, new 2007, 125 PSI, S/N 200711080097.

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.

Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until October 17, 2016.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

DIRECTIONS & LODGINGFROM GEORGE BUSH INTERCONTINENTAL AIRPORT: Exit airport area south to-wards Beltway 8. Turn right (west) onto Beltway 8 frontage road and enter the freeway. Beltway 8 will become the Sam Houston Toll Road. Proceed counter-clockwise around the city until you see the exit for Hwy. 290/Austin. Proceed west on Hwy. 290 and take the next exit for Jones Road. Turn left (south) onto Jones Road and proceed to FM 529. Turn right (west) onto FM 529 and pro-ceed to the traffic light at Fairview. Turn left (south) at the Fairview light and you will be entering into the Northwoods Industrial Park. Proceed to the sec-ond Longhorn Steel building ahead on your left at address number 12229. Watch for auction signs.

La Quinta Inn – 13290 FM 1960 West, Houston, Texas 77065 ............ (281) 469-4018

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to BidSpotter on PMI’s website calendar.

DO IT NOW.2. Either send wire transfer, or, overnight delivery service a cashier’s check deposit in the amount of

$3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

INSPECTION: Wednesday, September 14, 9:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION: THURSDAY, SEPTEMBER 15

10:00 A.M.