Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurement rounded off to nearest pounds or inches.
www.hyundai-ce.com 2008. 05 Rev.04
PLEASE CONTACT
180LC-7 / 180LCD-7
Some of the Photo may include optional equipment.
CRAWLER EXCAVATOR Applied Tier 2 Engine
ISO standard cab. All-weather steel cab with all-around visibility. Safety glass windows. Raise-up type windshield wiper. Sliding fold-in front window. Sliding side window. Lockable door. Hot & cool box. Accessory box & Ashtray
Computer Aided Power Optimization(New CAPO) system. 2-power mode, 3-work mode, 2-user mode. Auto deceleration & one touch deceleration
system. Auto warm up system. Auto overheat prevention system
Heater & DefrosterSelf diagnostic systemStarting aid, cold weatherCentralized monitoring. LCD display
Engine speedClock & Error code
. GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge
. WarningEngine coolant & Fuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging
. IndicatorPower max.Preheat & engine warming-up One touch decel
Door and cab locks, one keyAM/FM radio and cassette. Radio remote switchTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedConsole box tilting system (LH.)Three front working lightElectric hornBatteries (2X12 VX100 AH)Battery master switchAutomatic swing brakeRemovable reservoir tankWater separator, fuel lineBoom holding systemArm holding systemCounterweight (2950 kg, 6500 lb)Mono boom (5.1 m, 16’ 9”)Arm (2.6 m, 8’ 6”)Track shoes (600 mm, 24”)Track rail guardFuel warmer
Air-conditioner (5000 kcal/hr, 20000 BTU/hr)Sun visor for cabin insideFuel filler pump (35 /min, 9.5 USgpm) Beacon lampSafety lock valve for boom cylinder
with overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (clamshell, etc)Accumulator, work equipment lowering12 volt power supply (DC-DC converter)Electric. transducerTravel alarmCD Player
Various optional Boom. Hyd. adjustable boom (5.1m, 16’ 9”)
Various optional Arms. Short arm (2.2m, 7’ 3”). Long arm (3.10m, 10’ 2”)
Various optional Buckets (SAE heaped). Standard bucket (0.76m3, 0.99yd3). Narrow bucket (0.39m3, 0.51yd3). Narrow bucket (0.50m3, 0.44yd3). Narrow bucket (0.64m3, 0.55yd3). Light duty bucket (0.89m3, 1.16yd3). Light duty bucket (1.05m3, 1.37yd3). Heavy duty bucket(0.69m3, 0.9yd3)
Cabin lightsCabin FOPS/FOG(ISO/DIS 10262)Cabin Roof-cover TransparentTrack shoes. Triple grousers shoe (500mm, 20”). Triple grousers shoe (700mm, 28”). Triple grousers shoe (800mm, 32”)
Lower frame under coverPre heating systemTool kitOperator suitSpecial cowl. Air vent type side doorEmergency engine control cable
Standard Equipment Optional Equipment
Robex 180LC-7
HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03
NEW 7 SERIES Robex 180LC-7
A new chapter in construction equipmenthas now begun.Making the dream a reality.
Built for Maximum Power, Performance, Reliability.Built for Maximum Power, Performance, Reliability.
Some of the Photo may include optional equipment.
Technology in Cab Design
Operator’s Comfort is Foremost.Wide Cab Exceeds Industry Standards.
Visibility. Even more visibility than before, for safer, more efficient operating.
Excellent Ventilation. Ventilation has been improved by the addition of the larger fresh air intake system,
and by providing additional air flow throughout the cab.. Sliding front and side windows provide improved ventilation.. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment. The control levers and seat can be adjusted to provide maximum operator comfort. . The seat is fully adjustable for optimum operating position, reducing operator
fatigue. . Console boxes slide forward and backward for improved accessibility. . The proportional pressure controls reduce unnecessary exertion while ensuring
precise operation.. Large windows allow excellent visibility in all directions.
Low noise design. The Robex 7 series was designed with low operation noise in mind.. Hyundai engineering helps to keep interior and exterior noise levels to a minimum. . The cab's noise levels have been additionally reduced by improving the door seals
for the cab and engine compartments. . An insulated diesel engine compartment with sound-damping material also reduces
noise.
TECHNOLOGY IN CAB DESIGN 04 / 05
123 NEW 7 SERIES Robex 180LC-7
Some of the Photo may include optional equipment.
Operating Environment OPERATING ENVIRONMENT 06 / 07
Minimization of Shock and Vibrationthrough Cab Mounting SystemThe application of Viscous Mounting to the cabinsupport provides the operator with a muchimproved ride. The operator work efficiency will increase as theshock and noise level in the cabin decreases.
Hot & Cool BoxThe New Cab has even more space for theoperator. An Additional storage box islocated behind operators seat, and it keepsfood and beverages cool or hot.
Rear Emergency Exit WindowRear Exit Window is designed with easy
exit foroperator's safety.
Highly Sensitive Joystick andEasy EntranceNew joystick grips for precise controlhave been equipped with doubleswitches.
(Left: Power boost / One touchdeceleration, Right: Horn/Optional)
Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latest ergonomicresearch.Reinforced pillars have also been added for greater cab rigidity.
Smooth Travel Pedal and Foot Rests
Improved Intelligent DisplayInstrument Panel is installed in front ofRH console box. It is easy to check all critical systemswith easy-to-read indicators.
Easy-to-Reach Control PanelsSwitches and other essential controls arelocated near the operator. This helps keep operator movement to aminimum, enhancing control with lessoperator fatigue.
Wide Cab with Excellent VisibilityThe cab is roomy and ergonomicallydesigned with low noise level and goodvisibility.A full view front window and large rearand side windows provide excellentvisibility in all directions.
Remote Radio Control andDeluxe Cassette
Rise-up Wiper and Cabin LightsRaise-up wiper has enhanced for thebetter front view. Cabin Lights enhancessafety by brightly lighting thesurroundings during night work(optional)
NEW 7 SERIES Robex 180LC-7
CAB
CAB
The best working conditions in a pleasant environment.
Advanced CAPO SystemThe Advanced CAPO(Computer Aided PowerOptimization) system maintains engine andmutual pump power at optimum levels. Modeselections are designed for various workloads and maintaining high performancewhile reducing fuel consumption. Features such as auto deceleration and powerboost are included in the system. The system monitors engine speed, coolanttemperature, and hydraulic oil temperature.Contained within the system are selfdiagnostic capabilities which are displayed byerror codes on the cluster.
Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric andhydraulic malfunctions and displays them onthe LCD monitor of the cluster through errorcodes. This controller has the capacity toidentify 48 distinct types of errors. As theinformation from this device, such as enginerpm, main pump delivery pressure, batteryvoltage, hyd. temperature, and the state of alltypes of electric switches, provides theoperator with a much more exact state ofmachine operating condition. This makes the machine easier totroubleshoot when anything does go wrong.
Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.
Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping overan extended period in neutral position.
Auto Deceleration SystemWhen remote-control valves are in neutralposition more than 4 seconds, CPU controllerinstructs the accel actuator to reduce enginespeed to 1,200rpm. This decreases fuelconsumption and reduced cab noise levels.
One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to 950 rpm. And thenthe one touch decel switch is pressed again,the engine speed recovers.
Max. Flow Cut-off SystemFor precise control and finishing work, theMax. Flow Cut-off System reduces pumpflow, thus allowing smooth operation.
NEW 7 SERIES Robex 180LC-7
Advanced Hydraulic System Increased Higher Performance 08 / 09
Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy withstandard grease cylinder track adjusters and shock absorbing springs.
Automatic Engine Overheat PreventionIf the engine coolant temperature gets toohigh, the CPU controller lowers the enginespeed and cools the engine.
Anti Restart SystemThe new system protects the starter fromrestarting during engine operation, even if theoperator accidentally turns the start key again.
Power boost control SystemWhen the power boost system is activated,digging power increases about 10%. It isespecially useful when extra power istemporarily needed, for instance, whendigging hard earth and rock, or if the bucketteeth are stopped by a stubborn tree root.
Automatic Warming-up SystemAfter the engine is started, if the enginecoolant temperature is low, the CPUcontroller increases the engine speed andautomatically increases the pump flow rate towarm up the engine more effectively.
Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is deliveredto the actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.
Hydraulic Damper in Travel PedalImproved travel control ability & feeling byshock reducing when starting and stopping.
Drive signal
Main control valve
Main reliefvalve
solenoid valve
Travel speedsolenoid valve
Engine speedsensor
Main pump
Pilot pump
EPPR valve
Drive signalDrive signal
ProlixResistor
Drive signal
Pressure switch signal
P M
Engine
Fuel injectionpump
Accelactuator
Power boostbutton
Hyd tempsensor
LH controllever
Serial Communication(-)
Cluster
Serial Communication(+)
Coolant temperature signal
Mot
or d
rive
sign
al
Pote
ntio
met
er si
gnal
Engi
ne s
peed
sen
sor s
igna
l
Auto deceleration pressure switch
Hyd temperature signal
Accel dial
Extra B(Dozer)Arm 1
Boom 2S/Priority
Swing
Bucket
Arm 2
Extra A &Arm regen
Boom 1
Travel(LH)
Max flow COsolenoid valve
Max flowCO valve
Drive signalRH controllever
Optionbutton
One touchdecel button
Accel dial signal
signalsignal
CPU controller
Coolanttemp sensor
Extra C
Travel(RH)StraightTravel
Horn
P1 P2
NormalEmergency(optional)
Transmission
Battery
Power boost
Sol.ValveArm Regen.Co.
ADVANCED CAPO SYSTEM
Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough groundand working on wet sites through high tensile strength steel panels, with highly durableupper and lower rollers and track guards.Long undercarriage incorporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.
Powerful and PreciserSwing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action
POWER MODEH mode: High power S mode: Standard powerWORK MODE
: Heavy duty work: General work: Breaker
USER MODEM mode: Maximum PowerU mode: Memorizing Operator’s Preferable Power Setting
NEW MODE CONTROL SYSTEMMitsubishi S6S-DT ENGINEThe six cylinders turbo-charged and chargedair cooled, engine is built for power, reliabilityand economy. This engine meets EPA tier IIand EU stage II emission regulation.
Reliability You Can Depend OnMitsubishi S6S-DT engine is ideal solutionfor the toughest work environment.The engine is built from a cast iron, skirtedblock with main bearing support betweeneach cylinder. This combination providesmaximum strength, rigidity, and crankshaftsupport. Special liquid cooling results inuniform temperature distribution.
Compact Engine SizeThe compact size of the engine makes iteasier to service than other engines.The low engine height allows easy access formaintenance due to a side-mounted, gear-driven camshaft.
Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silent operation.The design includesbucket link durability and anti wearcharacteristics. Additional reinforcementplates on cutting edge section. Reinforcedbucket is made with thicker steel andadditional lateral plate.
Reliability & Serviceability RELIABILITY & SERVICEABILITY 10 / 11
NEW 7 SERIES Robex 180LC-7
Centralized Electric Control Box andEasy Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the samecompartment for easy service.
Easy to maintain engine componentsThe cooling and preheating system are provided foroptimum and immediate operation, guaranteeing longer lifefor the engine and hydraulic components. Servicing of the engine and hydraulics is considerablysimplified due to total accessibility.
Large tool box for extra storage
Durability of structure proven throughFEM(Finite Element Method) analysis
and long term durability test.Full open doors and master key system provide easy access for servicing.Handrails and foot steps are applied for safety
Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent allows easy maintenance and repair.
Highly efficient Hydraulic PumpPump output and Hydraulic tank capacityhave been increased.A pilot pump has been installed resultingin improved control sensitivity.
Some of the Photo may include optional equipment.
500 (20”)
700 (28”)
800 (32”)
600 (24”)
NEW 7 SERIES Robex 180LC-7
Specifications Backhoe attachment 12 / 13
Engine
Water cooled, 4 cycle diesel, 6-cylindersin line, direct injection turbocharged andcharge air cooled
126 HP (94 kW) at 2,100 rpm116 HP (87 kW) at 2,100 rpm128 PS (94 kW) at 2,100 rpm118 PS (87 kW) at 2,100 rpm42.5 kgf.m(307 lbf.ft) at 1,500 rpm94 x 120 mm (3.70” x 4.72”)4,996 cc (305 in3)2 x 12 V x 100 AH24 V- 5.0kW24V-50 Amp
Type
Ratedflywheelhorsepower
Max. torqueBore x strokePistonBatteriesStarting motorAlternator
J1995 (gross)J1349 (net)6271/1 (gross)6271/1 (net)
SAE
DIN
Buckets
Arms
Model Mitsubishi S6S-DT
Swing system
Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed
Axial piston motorPlanetary gear reductionGrease-bathedWet multi-disc12.0 rpm
Coolant & Lubricant capacity
(refilling)Fuel tankEngine coolant Engine oilSwing device-gear oilFinal drive(each)-gear oilHydraulic system(including tank)Hydraulic tank
liter260.0
3016.5
55.4240160
US gal68.77.94.41.31.463.442.3
UK gal57.26.63.61.11.252.835.2
Undercarriage
Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of rail guides on each side
X - leg typePentagonal box type
51282
Drives & Brakes
Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake
Pilot operated joysticks and pedals easy and fatigueless operation.
X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers,idlers, track adjusters with shock absorbing spring sprockets, andtrack chain with triple grouser shoes.
Operating weight (approximate)
Major component weight4,530kg (9,900 lb)2,950kg (6,500 lb)1,250kg (2,760 lb)1,780kg (3,920 lb)
UpperstructureCounterweight5.1m (16’ 9”)mono boom(with arm cylinder)Hydraulic adjustable boom(with arm cylinder)
Operating weight, including 5.1m (16’ 9”) mono boom, 2.6m (8’ 6”) arm, SAE heaped 0.76 m3 (0.99 yd3) backhoe bucket,lubricant, coolant, full fuel tank, hydraulic tank and the standardequipment.
Hydraulic system
Two variable displacement piston pumps2 x 168 /min (44.4 US gpm / 37.0 UK gpm)Gear pump
Two speed axial piston motorwith brake valve and parking brake
Axial piston motor with automatic brake
330 kgf/cm2 (4,690 psi)330 kgf/cm2 (4,690 psi)360 kgf/cm2 (5,120 psi)240 kgf/cm2 (3,410 psi)35 kgf/cm2 (500 psi)Installed
Boom : 2-115 X 80 X 1,090 mm (4.5” X 3.1” X 42.9”)Arm : 1-120 X 85 X 1,340 mm (4.7” X 3.3” X 52.8”)Bucket : 1-115 X 80 X 950 mm (4.5” X 3.1” X 37.4”)Blade : 2-110 X 75 X 320 mm (4.3” X 3.0” X 12.6”)
2-PCS1st : 2-115 X 80 X 960 mm (4.5” X 3.1” X 37.8”)2nd : 1-160 X 5 X 650 mm (6.3” X 3.7” X 25.6”)
TypeRated flowSub-pump for pilot circuitCross-sensing and fuel saving pump system
Travel
Swing
Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve
No. of cylinder-bore x rod x stroke
Main pump
Hydraulic motors
Relief valve setting
Hydraulic cylinders
Fully hydrostatic typeAxial piston motor, in-shoe designRV gear17,000 kgf (37,500 lbf)5.2 km/hr (3.2 mph) / 3.3 km/hr (2.1 mph)30o(58 %)Wet multi-disc
Traveling and steeringEngine throttleLights
Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)
Two levers with pedalsElectric, Accel Dial SwitchTwo lights mounted on the boom one in the tool box
Control
0.39 (0.51) 0.50 (0.65) 0.64 (0.84) 0.76 (0.99) 0.89 (1.16) 1.05(1.37) 0.69(0.90)
SAE heaped m3 (yd3)
SAE heaped 2.2(7’ 3”)Arm
Weight kg(lb)Width mm (in)
Boom
CECE heaped Without side cutters With side cutters
Capacity m3 (yd3)Recommendation m(ft.in)
: Standard backhoe bucket: Heavy duty bucket
: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less
5.1 (16’ 9”) 5.1 (16’ 9”) Hydraulic adjustable boom
0.39(0.51)0.50(0.65)0.64(0.84)0.76(0.99)0.89(1.16)1.05(1.37)0.69(0.90)
0.34(0.44)0.44(0.58)0.55(0.72)0.65(0.85)0.77(1.01)0.90(1.18)0.62(0.81)
620(24.4)760(29.9)920(36.2)
1,060(41.7)1,220(48.0)1,400(55.1)990(39.0)
740(29.1)880(34.6)
1,040(40.9)1,180(46.5)1,340(52.8)1,520(59.8)
-
410(900)470(1,040)510(1,120)570(1,260)610(1,340)680(1,500)700(1,540)
2.6(8’ 6”)
3.1(10’ 2”)
2.2(7’ 3”)
2.6(8’ 6”)
Boom and arms are of all-welded, low-stress, full-box section design. 5.1m(16’ 9”) mono boom, 5.1m(16’ 9”) hydraulic adjustable boom and 2.20m(7’ 3”), 2.60m(8’ 6”), 3.10m(10’ 2”) arms are available. Buckets are all-welded, high-strength steel implements.
2.60 (8’ 6”)
810 (1790)
2.20 (7’ 3”)
750 (1560)
Bucket digging force
Arm crowdforce
108.6 [118.4]11,070 [12,080]24,410 [26,630]
124.5 [135.9]12,700 [13,850]28,000 [30,550]
85.2 [93.0]8,690 [9,480]
19,160 [20,900]
89.0 [97.1]9,080 [9,910]
20,020 [21,840]
3.10 (10’ 2”)
890 (1960)
108.6 [118.4]11,070 [12,080]24,410 [26,630]
124.5 [135.9]12,700 [13,850]28,000 [30,550]
67.4 [73.5]6,870 [7,490]
15,150 [16,530]
69.4 [75.7]7,080 [7,720]
15,610 [17,030]
108.6 [118.4]11,070 [12,080]24,410 [26,630]
124.5 [135.9]12,700 [13,850]28,000 [30,550]
75.0 [81.8]7,650 [8,350]
16,870 [18,400]
77.6 [84.6]7,910[8,630]
17,440 [19,030]
Note : Arm weight including bucket cylinder and linkage. Standard arm
Arm Length
Weight
m(ft.in)
kg(lb)
kNkgflbf
kNkgflbf
kNkgflbf
kNkgflbf
SAE
ISO
SAE
ISO
Remark
[ ]:Power Boost
2.60m (8’ 6”) 3.10m (10’ 2”)2.20m (7’ 3”)
Digging force
Shoes(Triple grouser) Operating weight Ground pressuremm (in) kg (lb) kgf/cm2 (psi)
17,950(39,580)
19,010(41,910)
18,200(40,120)
19,260(42,460)
18,450(40,680)
19,510(43,010)
18,700(41,230)
19,770(43,580)
180LC-7
180LCD-7
180LC-7
180LCD-7
180LC-7
180LCD-7
180LC-7
180LCD-7
0.49(6.97)
0.52(7.39)
0.42(5.97)
0.44(6.26)
0.36(5.12)
0.38(5.40)
0.32(4.55)
0.34(4.83)
Standard equipment
Operating weight
Shoes(Triple grouser) Operating weight Ground pressuremm (in) kg (lb) kgf/cm2 (psi)
Operating weight
Dimensions & Working ranges
Dimensions R180LC-7 Mono boom
Working ranges
B
C
D
D’
E
F
G
H
A Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
4,190 (13’ 9”)
1,050 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
460 (1’ 6”)
2,250 (7’ 5”)
3,360 (11’ 0”)
mm (ft . in)
I
J
K
L
Boom length
Arm length2,200(7’ 3”)
5,100 (16’ 9”)
5,100 (16’ 9”)
8,620(28’ 3”)
2,960(9’ 9”)
2,600(8’ 6)
8,600(28’ 3”)
2,910(9’ 7”)
3,100(10’ 2”)
8,600(28’ 3”)
3,090(10’ 2”)
500(20”)
2,750(9’ 1”)
600(24”)
2,850(9’ 5”)
700(28”)
2,950(9’ 9”)
800(32”)
3,050(10’ 1”)
Overall length
Overallheight of boom
mm (ft . in)
Track shoewidth
Overall width
Standard equipment
Standard equipment
A
A’
B
B’
C
D
E
F
Boom length
Arm length2,200(6’ 3”)
8,690(28’ 6”)
8,530(27’ 12”)
5,660(18’ 7”)
5,440(17’ 10”)
5,140(16’ 10”)
8,740(28’ 8”)
6,100(20’ 0”)
3,180(10’ 5”)
2,600(8’ 6”)
9,030(29’ 8”)
8,870(29’ 1”)
6,060(19’ 11”)
5,860(19’ 3”)
5,440(17’ 10”)
8,870(29’ 1”)
6,240(20’ 6”)
3,170(10’ 5”)
3,100(10’ 2”)
9,450(31’ 0”)
9,300(30’ 6”)
6,560(21’ 6”)
6,370(20’ 11”)
5,730(18’ 10”)
8,970(29’ 5”)
6,380(20’ 11”)
3,180(10’ 5”)
Max. diggingreach
Max. diggingreach on ground
mm (ft . in)
Max. diggingdepth
Max. digging depth(8' level)
Max. vertical walldigging depth
Max. diggingheight
Max. dumpingheight
Min. swingradius
14 / 15
Dimensions R180LC-7 Hydraulic adjustable boom
Working ranges
B
C
D
D’
E
F
G
H
A Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
4,190 (13’ 9”)
1,050 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
460 (1’ 6”)
2,250 (7’ 5”)
3,360 (11’ 0”)
mm (ft . in)
I
J
K
L
Boom length
Arm length
5,100 (16’ 9”)
5,100 (16’ 9”)
2,200(7’ 3”)
8,580(28’ 2”)
3,040(9’ 12”)
2,600(8’ 6”)
8,570(28’ 1”)
3,050(10’ 0”)
500(20”)
2,750(9’ 1”)
700(28”)
2,950(9’ 9”)
800(32”)
3,050(10’ 1”)
600(24”)
2,850(9’ 5”)
Overall length
Overallheight of boom
mm (ft . in)
Track shoewidth
Overall width
A
A’
B
B’
C
D
E
F
Boom length
Arm length2,200(7’ 3”)
8,750(28’ 8”)
8,600(28’ 3”)
5,460(17’ 11”)
5,350(17’ 7”)
4,670(15’ 4”)
9,390(30’ 10”)
6,680(21’ 11”)
3,130(10’ 3”)
2,600(8’ 6”)
9,110(29’ 11”)
8,960(29’ 5”)
5,830(19’ 2”)
5,750(18’ 10”)
5,030(16’ 6”)
9,600(31’ 6”)
6,900(22’ 8”)
2,970(9’ 9”)
Max. diggingreach
Max. diggingreach on ground
mm (ft . in)
Max. diggingdepth
Max. digging depth(8' level)
Max. vertical walldigging depth
Max. diggingheight
Max. dumpingheight
Min. swingradius
NEW 7 SERIES Robex 180LC-7
Dimensions & Working ranges
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
*6630*14620*10580*23320
*6630*14620*10580*23320
*8440*18610
*6730*14840*10510*23170
*8940*19710
*5810*12810
*8440*18610
*6730*14840
938020680*8940
*19710*5810
*12810
*4240*9350*5370
*11840*6520
*14370*7130
*15720*7050
*15540*6190
*13650
*4240*9350*5370
*118405100
112404870
107404810
106004870
10740
*3800*8380*4250*9370*4780
*10540*5110
*11270*5050
*11130
3590791034507610329072503170699031206880
*3380*7450*3320*7320*3340*7360323071203160697033107300
*3580*7890*3360*7410
*3380*745027306020223049202010443019504300203044802330514030906810
5.81(19.1)7.16
(23.5)7.92
(26.0)8.30
(27.2)8.34
(27.4)8.06
(26.4)7.42
(24.3)6.28
(20.6)
Lifting Capacities
Lifting capacities R180LC-7 Mono boom
NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Rating over-side or 360 degreeRating over-front
*6320*13930
*9350*20610
*6320*13930
*9350*20610
*7340*16180
*7700*16980
*7450*16420*10020*22090
*9550*21050
*6930*15280
*7340*16180
*7700*16980
*7450*16420
9260204109390
20700*6930
*15280
*4920*10850
*6170*13600
*6950*15320
*7070*15590
*6450*14220
*4590*10120
*4920*10850
512011290
485010690
474010450
477010520*4590
*10120
*2730*6020*3480*7670*3970*8750*4550
*10030*4980
*10980*5050
*11130*4500*9920
*2730*6020*3480*76703460763032807230313069003060675030906810
*2540*5600*3320*7320*3150*6940
234051602270500022004850
*3060*6750*3040*6700*3090*6810301066402940648030506720
*3430*7560*3350*7390
*3060*675024805470205045201850408017903950186041002100463027005950
6.33(20.8)7.56
(24.8)8.28
(27.2)8.64
(28.3)8.68
(28.5)8.42
(27.6)7.81
(25.6)6.75
(22.1)
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
*5980*13180
*8450*18630*11670*25730
*5980*13180
*8450*18630*11670*25730
*9480*20900
*8230*18140
*9760*21520*10130*22330
*8010*17660
*9480*20900
*8230*18140
9120201109180
20240*8010
*17660
*4350*9590*5700
*12570*6680
*14730*7020
*15480*6670
*14700*5360
*11820
*4350*95905150
113504820
106304670
103004650
102504770
10520
*2620*5780*3090*6810*3620*7980*4260*9390*4790
*105604890
10780*4720
*10410
*2620*5780*3090*68103460763032607190309068102990659029806570
*1910*4210*2820*6220*3540*780034907690
*2950*6500
*1910*421023305140224049402150474021104650
*2700*5950*2730*6020*2800*617026905930262057802710597030006610
*3270*7210
*2700*595022004850184040601660366016103550166036601850408023005070
6.92(22.7)8.05
(26.4)8.73
(28.6)9.06
(29.7)9.10
(29.9)8.85
(29.0)8.28
(27.2)7.30
(24.0)
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach
Reach
m(ft)
16 LIFTING CAPACITIES 17
Dimensions R180LCD-7
Working ranges
I
J
K
L
Boom length
Arm length2,200(7’ 3”)
5,100 (16’ 9”)
5,100 (16’ 9”)
9,010(29’ 7”)
2,960(9’ 9”)
2,600(8’ 6)
8,990(29’ 6”)
2,910(9’ 7”)
3,100(10’ 2”)
8,990(29’ 6”)
3,090(10’ 2”)
500(20”)
2,750(9’ 1”)
600(24”)
2,850(9’ 5”)
700(28”)
2,950(9’ 9”)
800(32”)
3,050(10’ 1”)
Overall length
Overallheight of boom
mm (ft . in)
Track shoewidth
Overall width
Standard equipment
Standard equipment
A
A’
B
B’
C
D
E
F
Boom length
Arm length2,200(6’ 3”)
8,690(28’ 6”)
8,530(27’ 12”)
5,660(18’ 7”)
5,440(17’ 10”)
5,140(16’ 10”)
8,740(28’ 8”)
6,100(20’ 0”)
3,180(10’ 5”)
2,600(8’ 6”)
9,030(29’ 8”)
8,870(29’ 1”)
6,060(19’ 11”)
5,860(19’ 3”)
5,440(17’ 10”)
8,870(29’ 1”)
6,240(20’ 6”)
3,170(10’ 5”)
3,100(10’ 2”)
9,450(31’ 0”)
9,300(30’ 6”)
6,560(21’ 6”)
6,370(20’ 11”)
5,730(18’ 10”)
8,970(29’ 5”)
6,380(20’ 11”)
3,180(10’ 5”)
Max. diggingreach
Max. diggingreach on ground
mm (ft . in)
Max. diggingdepth
Max. digging depth(8' level)
Max. vertical walldigging depth
Max. diggingheight
Max. dumpingheight
Min. swingradius
B
C
D
D’
E
F
G
H
M
N
O
A Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
Width of blade
3,360 (11’ 0”)
4,190 (13’ 9”)
1,050 (3’ 5”)
2,530 (8’ 4”)
2,480 (8’ 2”)
2,475 (8’ 1”)
2,915 (9’ 7”)
460 (1’ 6”)
2,250 (7’ 5”)
780 (2’ 7”)
520 (1’ 8”)
645 (2’ 1”)
2,850 (9’ 4”)
mm (ft . in)
NEW 7 SERIES Robex 180LC-7
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Lifting capacities R180LC-7 Hydraulic adjustable boom
NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Rating over-side or 360 degreeRating over-front
LIFTING CAPACITIES 18 / 19
NEW 7 SERIES Robex 180LC-7
*5710*12590
*8910*19640
*5710*12590*8910
*19640
*6670*14700
*6670*14700
*9370*20660
*9130*20130
*6310*13910
*6670*14700
*6670*14700
922020330*9130
*20130*6310
*13910
*6150*13560
*6860*15120
*6910*15230
*6210*13690
*4190*9240
511011270
482010630
471010380
475010470
41909240
*3990*8800*4530*9990*4910
*10820*4940
*10890*4310*9500
3460763032607190311068603040670030806790
*3100*6830*3090*6810
297065502900639030206660
*3180*7010*2940*6480
24105310200044101800397017403840182040102060454026405820
*2920*6440*3680*811036308000
233051402250496021904830
7.66(25.1)8.37
(27.5)8.72
(28.6)8.77
(28.8)8.50
(27.9)7.90
(25.9)6.86
(22.5)
Load radiusLoad point
heightm(ft)
3.0 m(10.0 ft)1.5 m(5.0 ft)
6.0 m20.0 ft4.5 m15.0 ft3.0m
10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglb
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
*5870*12940
*5870*12940
*5880*12960
*9760*21520
*8470*18670
*5880*12960
934020590*8470
*18670
*5410*11930
*6470*14260
*7010*15450
*6870*15150
*5920*13050
*5410*11930
508011200
484010670
478010540
486010710
*3840*8470*4260*9390*4740
*10450*5030
*11090*4920
*10850
3600794034507610327072103140692031006830
*3220*7100
22705000
*3370*7430*3340*7360
320070503140692032907250
*3320*7320*2910*6420
267058902180481019604320190041902000441022905050
*2910*6420
7.24(23.8)7.99
(36.2)8.36
(27.4)8.41
(27.6)8.13
(26.7)7.50
(24.6)6.37
(20.9)
Load radiusLoad point
heightm(ft)
3.0 m(10.0 ft)1.5 m(5.0 ft)
6.0 m20.0 ft4.5 m15.0 ft3.0m
10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft
kglbkglbkglbkglbkglbkglbkglb
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
CERES SYSTEMCERES(Construction Equipment Resource Support)is HHI’s new information system on all HyundaiConstruction equipment’s products for all overseascustomer, dealer and branch office.
http://ceres.hhi.co.kr
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
*6630*14620*10580*23320
*6630*14620*10580*23320
*8440*18610
*6730*14840*10510*23170
*8940*19710
*5810*12810
*8440*18610
*6730*14840
992021870*8940
*19710*5810
*12810
*4240*9350*5370
*11840*6520
*14370*7130
*15720*7050
*15540*6190
*13650
*4240*9350*5370
*118405390
118805170
114405100
112405160
11380
*3800*8380*4250*9370*4780
*10540*5110
*11270*5050
*11130
3790836036508050349076903370743033207320
*3380*7450*3320*7320*3340*7360*3410*7520*3520*7720*3570*7870*3580*7890*3360*7410
*3380*745029006390238052502140472020804590217047802490549032807230
5.81(19.1)7.16
(23.5)7.92
(26.0)8.30
(27.2)8.34
(27.4)8.06
(26.4)7.42
(24.3)6.28
(20.6)
Lifting Capacities
Lifting capacities R180LCD-7
NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load
with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Rating over-side or 360 degreeRating over-front
*6320*13930
*9350*20610
*6320*13930
*9350*20610
*7340*16180
*7700*16980
*7450*16420*10020*22090
*9550*21050
*6930*15280
*7340*16180
*7700*16980
*7450*16420
980021610*9550
*21050*6930
*15280
*4920*10850
*6170*13600
*6950*15320
*7070*15590
*6450*14220
*4590*10120
*4920*10850
541011930
514011330
504011110
506011160*4590
*10120
*2730*6020*3480*7670*3970*8750*4550
*10030*4980
*10980*5050
*11130*4500*9920
*2730*6020*3480*76703660807034807670333073403260719032907250
*2540*5600*3320*7320*3150*6940
250055102420534023605200
*3060*6750*3040*6700*3090*6810*3170*6990*3270*7210*3370*7430*3430*7560*3350*7390
*3060*675026305800219048301980437019204230199043902250496028706330
6.33(20.8)7.56
(24.8)8.28
(27.2)8.64
(28.3)8.68
(28.5)8.42
(27.6)7.81
(25.6)6.75
(22.1)
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
*5980*13180
*8450*18630*11670*25730
*5980*13180
*8450*18630*11670*25730
*9480*20900
*8230*18140
*9760*21520*10130*22330
*8010*17660
*9480*20900
*8230*18140
9650212709710
21410*8010
*17660
*4350*9590*5700
*12570*6680
*14730*7020
*15480*6670
*14700*5360
*11820
*4350*95905440
119905120
112904960
109304940
108905060
11160
*2620*5780*3090*6810*3620*7980*4260*9390*4790
*10560*5000
*11020*4720
*10410
*2620*5780*3090*68103620798034607630329072503190703031807010
*1910*4210*2820*6220*3540*7800*3770*8310*2950*6500
*1910*421024805470239052702310509022604980
*2700*5950*2730*6020*2800*6170*2890*6370*3010*6640*3120*6880*3230*7120*3270*7210
*2700*595023405160197043401790395017303810178039201980437024605420
6.92(22.7)8.05
(26.4)8.73
(28.6)9.06
(29.7)9.10
(29.9)8.85
(29.0)8.28
(27.2)7.30
(24.0)
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)
7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft
GroundLine
-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft
kglbkglbkglbkglbkglbkglbkglbkglbkglb
6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach
Reach
m(ft)
Load radiusLoad point
heightm(ft)
4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach
Reach
m(ft)
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT
Top Related