SpecialisedApplications
Over the years Wade has been asked to providesolutions to various drainage problems. ThisSection includes examples of products, originallydesigned for a particular project, but which havebecome available for use elsewhere.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
Specialised ApplicationsSpecialised Applications
11
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplicationsLarge Gullies
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
November 2009
OPTIONS: Membrane clamping collar - add suffix “C”Material: Body – mild steel, zinc spray coated
Grating – cast iron, sherardized
11L1
Spec. Outlet Grating Free Load Rating kgCode Size Area cm2 Class
Q105 100mm BS416 1250 M125 100.0Q106 150mm BS416 1250 M125 100.0
Q403 For use in service and parking areas,factories, warehouses etc. Trapped gully withhinged ductile iron grating and rodding access
Spec. Outlet Size Grating Free Load Rating kgCode mm Area cm2 N/mm2 Class
Q403 100mm BS416 280 23 M125 23.0
OPTIONS: Stainless Steel filter bucket - add suffix “B”Membrane clamping collar - Spec. Code C.Q4
Material: Body – stainless steelGrating – ductile iron, sherardized
Spec. Grating Free Load Rating kgCode Area cm2 Class
Q301 205 L15 22.4Q302 205 L15 22.4
Q501 For use where a trapped side outlet isrequired in pedestrian traffic areas
Spec. Outlet Size Grating Free Load Rating kgCode mm Area cm2 N/mm2 Class
Q501 100 125 4 L15 40.0
OPTIONS: Filter bucket – add suffix “B”Membrane clamping collar – Spec. Code C.Q5Backwater valve – add suffix “V”
Material: Body – cast iron, lacquered Grating – nickel bronzeAccess Cover – nickel bronze
Q1 Series For use in factories, service andparking areas, warehouses etc., where verylarge volumes of water are discharged
Q3 Series For use as a hopper drain, or anindirect waste receiver, for pedestrian traffic only
OPTIONS: Flange and membrane clamp - add suffix “F”Secondary strainer - add suffix “D”Stainless Steel filter bucket - add suffix “B”
Material: Body – Q301 cast iron, lacqueredQ302 cast iron, plastic coated
Grating – nickel bronzeOther materials: Versions also available with cast iron grating
Sp
ecia
lise
d
Ap
plica
tion
sS
pecia
lise
d
Applica
tion
sSpecialisedApplicationsLarge Gullies
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
November 2009
11L2
OPTIONS: Membrane clamping collar - Spec. Code C.Q6Material: Body – cast iron, lacquered
Grating – cast iron, sherardizedOtherfinishes: Details on request
327 x 131
419 x 216
(Optional)
Non-Secured Grating
35
118
4" BSP
406 x 160
552 x 292
48
146
4" BSP
(Secured Optional)(Optional)
Q601 For use in gutters and trenches Q702 For use in gutters and trenches
274 x 295
192 x 242
65
167
’A’
410
To suit 100mm or150mm BS437 pipe.
54
BackwaterValve
SecuredRemoveableGrating
Q8 Series For use in pools or pits wheresafeguard against back�ow is required
Spec. Outlet A Grating Free Load Rating kgCode Size Area cm2 Class
Q801 100mm 89mm 185 N/A 22.0Q802 150mm 116mm 185 N/A 22.0
Material: Body – stainless steelGrating – cast iron, sherardizedBackwater valve – Gunmetal
OPTIONS: Membrane clamping collar- Spec. Code C.Q7Secured grating- add su�x “Secured”
Material: Body – cast iron, lacqueredGrating – cast iron, sherardized
Other materials and finishes: Details on request
Spec. Grating Free Load Rating kgCode Area cm2 N/mm2 Class
Q601 105 5 L15 9.5
Spec. Grating Free Load Rating kgCode Area cm2 N/mm2 Class
Q702 165 4 L15 25.1
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplicationsGunmetal Gullies - For use in metal decks
Non-spark gunmetal gullies are for use in metaldecks such as on oil rigs and ships. Gratings areheight adjustable by means of their thread,enabling installation at finished floor level.Versions are available with choice of outlet andgratings to suit different floor finishes.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
For information on flow rates please contact our Technical Services Dept.
11M1
P301 For use with tile or composition flooring
P5 Series For use with sheet floor covering such as vinyl
Non-Trapped Gullies
Spec. Outlet Size Grating Free Load Rating kgCode mm Area cm2 Class
P301 75 48 L15 8.0
Note: Flanged outlets also available. Deck mounting flangecan be drilled to suit specific requirements.
Spec. Outlet Outlet Grating Free Load Rating kgCode Size mm Connection Area cm2 Class
P501 50 2" BSPT Male 32 L15 4.1P502 50 *Copper Connection 32 L15 4.1
* Please advise copper pipe specification.
Note: Deck mounting flange can be drilled to suit specificrequirements.
Sp
ecia
lise
d A
pp
lica
tion
sS
pe
cia
lise
d A
pp
lica
tion
sSpecialisedApplicationsGunmetal Gullies - For use in metal decks
Non-spark gunmetal gullies with deep sumpbody are for use in metal decks such as on oilrigs and ships. Gratings are height adjustableby means of their thread, enabling installationat finished floor level. Versions are availablewith choice of outlet, gratings to suit differentfloor finishes and removable bell trap.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
For information on flow rates please contact our Technical Services Dept.
11M2
P4 Series For use with tile or composition flooring
P4 Series For use with sheet floor covering such as vinyl
Trapped Gullies
Note: Flanged outlets also available. Deck mounting flangecan be drilled to suit specific requirements.
Note: Flanged outlets also available. Deck mounting flangecan be drilled to suit specific requirements.
Spec. Outlet Dia. A Grating Free Load Rating kgCode Size mm mm Area cm2 Class
P403 75 76 125 L15 28.0P404 100 108 125 L15 30.0
Spec. Outlet Dia. A Grating Free Load Rating kgCode Size mm mm Area cm2 Class
P413 75 76 106 L15 28.0P414 100 108 106 L15 30.0
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplicationsOverflow Gullies - For Decorative Pools,Baptismal Pools and Fonts
To prevent the depth of water exceeding therequired maximum, a polished, stainless steelstandpipe receives excess or surges of waterfor discharge via any Vari-Level body, shownin Section 5B. The standpipe is easilyremoved when the pool/font is required to beemptied of water.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
To specify/order other standpipe lengths, add length (mm)to Spec. Code.
11O
K3211
K3212
Spec. Code B kg
K3201 Without cap 50 1.8K3202 With cap 50 1.8
Typical Installation
Spec. Code Floor Finish
K3211 + Standpipe Length (mm) Marble, tiles etc.
K3212 + Standpipe Length (mm) Sheet floor covering such as vinyl,certain trowel applied resins
Accessories - select from Section 5X.
Typical InstallationK3201
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplicationsDrainage of Planting Areas and Roof Gardens
Wade offers a range of products providingdrainage of moisture in planting areas andflower boxes, minimising loss of soil.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
11P
P8 Series For applications where a grating is required at the surface, ina paved area, or where access is required; for use with D10-D12 SeriesBodies, shown on page 5B ntcibm
P9 Series For applications where the standpipe is concealed by soil; for use withVari-Level Bodies shown in Section 5B. Dome is removable for access purposes.
Material: Grating - Ductile iron, sherardizedBallast Guard - Stainless SteelFrame/Clamp Collar - Cast iron, lacquered
Spec. Code kg
P801 + Length (mm) 4.0
Spec. Code kg
P901 + Standpipe Length (mm) 0.7
P10 Series For applications where all drainage is concealed by soil; versions available to suit asphalt or sheet/brush on membranes.
Material: Dome - CopperStandpipe - PVC
Material: Stainless Steel
Spec. Installation Membrane Dome Free kgCode Type Area cm2
P1001 1 Sheet or brush on 115 0.3P1002 2 Asphalt 115 1.3
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplications90° Gully for use in shower areas etc.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
11S
P14 Series A flush fitting non-trapped gully for use inareas where drainage is required at the junction of a walland floor. The lacquered cast iron body has horizontaloutlet, available in 3 sizes; the secured grating is ofnickel bronze
Typical Installation
Gully Outlet A B Grating Free Load kgSpec. Code Size mm mm Area cm2 Rating Class
P1402 2" BSP 37 148 82 K3 4.7P1403 3" BSP 51 134 82 K3 5.0P1404 4" BSP 65 120 82 K3 5.1
OPTIONSSuffixH Fitted with allen screws for security applications
Specia
lised A
pplic
atio
ns
Specia
lised A
pplic
atio
ns
SpecialisedApplicationsDouble Sealed Access Cover - for man entryFor use with Sheet Floor Covering
Wade has solved the problem of access toinspection chambers and service ducts withinbuildings where sheet floor covering is used. Awatertight joint formed between the sheet floorcovering and the edge of the frame, preventswater from seeping into the structure.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
11SF 1
Hygienic - no holes, recesses or dirt traps.
Air tight - double sealed by closed cell neoprene gaskets to meet all current buildingregulations.
Safe - all edges of floor material are securely clamped in position by concealed clampstrips. No steps or exposed edges.
Unobtrusive - when installed only a 50mm wide stainless steel clamping frame is visible.
Vandal Resistant - cover is removable only after loosening several screws.
Spec. Clear Opening kgCode Size mm
R111 450 x 450 18.0R112 600 x 450 22.0R113 600 x 600 26.5R114 750 x 600 30.5R115 750 x 750 35.0R116 900 x 600 34.5
Material: Lower frame, cover and clamping strips -Galvanised mild steelCover clamping frame and fixing screws -Stainless Steel
Overall depth of coverincluding frame is 32mm
Visible width is clearopening plus 143mm(Overall frame isadditional 28mm)
Patent No. 2147803
Special sizes are available to order, for details pleasecontact our Technical Services Dept.
OPTIONSSuffixH Fitted with allen screws for security applications
Gully Assemblies for*Sheet Floor Covering
For use in wet bathrooms andshower areas decked with sheetfloor covering, such as vinyl, of athickness up to 3.5mm
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
FEATURESWatertight – clamping collar provides a water-tight seal between theflooring material and gully even when the grating is removed.Water seal – formed by a bucket and dip tube, the water seal depthof 50mm complies with plumbing codes of practice in the U.K.Flow rate – (grating and funnel versions) rate in excess of 40 l/min;comfortably exceeds the minimum rate of 24 l/min required by BS EN274 for the discharge from a single shower head.Vandal resistant – GV5007 secured grating has no visible fixingsand is removable only upon depressing an unobtrusive lever.Accessible – removable grating/cover/funnel and trap enable easyaccess from above for maintenance purposes.Bucket – removable filter bucket helps to eliminate blockages andintercepts jewellery and other items which might otherwise bewashed away.Outlet – 50mm socket for solvent-weld connection to PVC pipework.Installation – ideally suited for installation in timber or concretefloors or where space is limited.Quality – stainless steel or nickel bronze grating/cover/funnel withmatt finish (GV5817 polished), combines durability, safety and goodlooks.
Note: The gully must be supported and installed in accordancewith instructions which accompany the product.
11SF 2
“P” Trapped Gully - 50mm seal
Material: Grating/Cover/Funnel, clamping collar -Stainless Steel or Nickel BronzeBody, dip tube, bucket - Plastic (ABS)
* Notes:1. Vari-Level Bodies, shown in Section 5B, may be used witha range of Gratings, shown in Section 5G , to form assembliesfor use with various flooring finishes including sheet floorcovering and tiles.2. Other gully assemblies for use with sheet floor covering areshown in Section 4 SF (Stainless Steel Gullies).3. A full colour brochure “Drainage Products for use withSheet Floor Covering” depicts a wider range of productsincluding linear drainage, floor gullies and access covers.
GV5 Series – 50mm socket outlet
Spec. Illustration Top Version Load kgCode No. Material Rating Class
GV5007 1 Stainless Steel Grating (periph. slot) K3 1.2GV5103 2 Nickel Bronze Grating (slotted) L15 1.5GV5107 2 Stainless Steel Grating (slotted) L15 1.0GV5503 3 Nickel Bronze Solid Cover (gasketed) L15 1.9GV5517 3 Stainless Steel Solid Cover (unsealed) L15 1.2GV5803 4 Nickel Bronze Funnel (Tapered) 101 Dia x 100H n/a 2.4GV5817 4 Stainless Steel Funnel (Parallel) 101 Dia x 101H n/a 1.7GV5823 4 Nickel Bronze Funnel (Oval) 224L x 85W x 99H n/a 3.7
OPTIONSSuffixH Fitted with allen screws for security applications (not GV5007)I Tapped to provide a direct connection for waste pipes - specify size 11 4", 11 2", or 2" (solid cover versions only) PB Made of polished bronze (available for nickel bronze versions only)P Polished (GV5817 is polished as standard)
1 - Peripheral Slot
3 - Solid Cover
2 - Slotted Grating
4 - Funnel
GV5007
Show
er
Gulli
es
- A
ssem
blie
s fo
r S
heet
Floor
Cove
ring
Show
er
Gulli
es
- A
ssem
blie
s fo
r S
heet
Floor
Cove
ring
Gully A
ssem
blie
s for S
heet Flo
or C
ove
ring
Gully A
ssem
blie
s for S
heet Flo
or C
ove
ring
Gully Assemblies for*Sheet Floor Covering
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
11SF 3
For use in wet bathrooms, kitchenand shower areas decked withsheet floor covering, such as vinyl,of a thickness up to 3.5mm
Trapped Gully with Vertical Outlet – 50mm seal
FEATURESWatertight – clamping collar provides a water-tight seal between theflooring material and gully even when the grating is removed.Water seal – formed by a bucket and dip tube, the water seal depthof 50mm complies with plumbing codes of practice in the U.K.Flow rate – (grating and funnel versions) rate in excess of 40 l/min;comfortably exceeds the minimum rate of 24 l/min required by BS EN274 for the discharge from a single shower head.Vandal resistant – GV6007 secured grating has no visible fixingsand is removable only upon depressing an unobtrusive lever.Accessible – removable grating/cover/funnel and trap enable easyaccess from above for maintenance purposes.Bucket – removable filter bucket helps to eliminate blockages andintercepts jewellery and other items which might otherwise bewashed away.Outlet – 110mm spigot outlet for solvent-weld or ring-sealconnection to PVC pipework (50mm reducer supplied loose).Installation – ideally suited for installation in timber or concretefloors or where space is limited.Quality – stainless steel or nickel bronze grating/cover/funnel withmatt finish (GV6817 polished), combines durability, safety and goodlooks.
Note: The gully must be supported and installed in accordancewith instructions which accompany the product.
Material: Grating/Cover/Funnel, clamping collar -Stainless Steel or Nickel BronzeBody, dip tube, bucket - Plastic (ABS)
* Notes:1. Vari-Level Bodies, shown in Section 5B, may be used witha range of Gratings, shown in Section 5G , to form assembliesfor use with various flooring finishes including sheet floorcovering and tiles.2. Other gully assemblies for use with sheet floor covering areshown in Section 4 SF (Stainless Steel Gullies).3. A full colour brochure “Drainage Products for use withSheet Floor Covering” depicts a wider range of productsincluding linear drainage, floor gullies and access covers.
GV6 Series – 110mm spigot outlet with 50mm reducer
Spec. Illustration Top Version Load kgCode No. Material Rating Class
GV6007 1 Stainless Steel Grating (periph. slot) K3 1.2GV6103 2 Nickel Bronze Grating (slotted) L15 1.5GV6107 2 Stainless Steel Grating (slotted) L15 1.0GV6503 3 Nickel Bronze Solid Cover (gasketed) L15 1.9GV6517 3 Stainless Steel Solid Cover (unsealed) L15 1.2GV6803 4 Nickel Bronze Funnel (Tapered) 101 Dia x 100H n/a 2.4GV6817 4 Stainless Steel Funnel (Parallel) 101 Dia x 101H n/a 1.7GV6823 4 Nickel Bronze Funnel (Oval) 224L x 85W x 99H n/a 3.7
OPTIONSSuffixH Fitted with allen screws for security applications (not GV6007)I Tapped to provide a direct connection for waste pipes - specify size 11 4", 11 2", or 2" (solid cover versions only) PB Made of polished bronze (available for nickel bronze versions only)P Polished (GV6817 is polished as standard)
1 - Peripheral Slot
3 - Solid Cover
2 - Slotted Grating
4 - Funnel
GV6103
Access C
ove
rs - Gen
era
l Pu
rpose
Access C
ove
rs - Gen
era
l Pu
rpose
Access Covers –General PurposeNickel Bronze - BS 1400 - satin finish
Versions are suited to pedestrian areas, toprovide access to services.
Tel: +44(0)1787 475151 Fax: +44(0)1787 475579 E-mail: [email protected] Web: www.wadedrainage.co.uk
September 2005
OPTIONSP Polished PB Made of polished bronze
Note: A range of Vari-Level access covers of cast iron,nickel bronze and stainless steel is shown in Section 5V.Direct Connection versions are shown in Section 6V.
11V
R5 Series Nickel bronze frame withstainless steel, unsealed, securedremovable cover for use in a wall
R611 Sealed, recessedfor flooring material
R621 Sealed, solid cover
R311 Unsealed, secured,removable
R4 Series Unsealed, secured,removable
Access Covers in amarble floor.
R611 sealed access coversconceal electrical powerpoints at the Burrel Collection,Glasgow.
Spec. Overall Overall Overall Load kgCode Dia./Width Length Height Rating
mm mm mm Class
R311 186 � 25 L15 2.5R411 178 178 23 L15 2.4R412 229 229 25 L15 2.8R511 178 178 29 N/A 1.8R512 229 229 29 N/A 2.5R611 138 � 48 L15 2.0R621 138 � 48 L15 2.0R801 205 205 30 L15 4.3
R801 Sealed, secured,recessed for flooringmaterial
Top Related