L A N D I A A G R O
Engineered to last www.LandiaWorld.com
• Pumping• Mixing • Automatic Control
Slurry Solutions- For Mink Farming...
Solution with Reception Tank
Solution with Dry Pit
Solution with Reception TankThe slurry flows from the stables into the in-ground Reception Tank. The submersible pump can be used for two purposes:· Pumping to the Storage Tank· Back flushing of slurry pipe system
Before pumping to storage tank the submersi-ble mixer ensures a homogenous condition of the slurry. Pump- and mixer either manually or automatically operated.
Solution with Dry PitCompared to a large reception tank several advantages can be achieved by applying a dry installed Landia MPTK Slurry Pump in a Dry Pit, i.e the displayed PE-Pit.
Advantages: · No slurry reception tank and hence reduced odour impact. · Less space requirement = smaller footprint.· One single pump can serve several slurry pipes and channels.· The Landia PE-Pit is water tight and comes as a complete package, ready for installation. · The MPTK-Pump can also be installed in a traditional Concrete Pit.
Sign.:
Dwg.no.:
Scale: Date:KNHL
Mixer and submersible pump
From mink cages
Mixing of Storage TankBefore starting to empty the Storage Tank it is important that the slurry is well mixed – in a homogenous condition.
A submersible mixer installed inside the tank is the ideal solution ensuring sufficient mixing capacity whenever needed.The mixer is either manually or automatically operated and can be installed in both open- and covered tanks.
Of course Landia also has suitable pumps for emptying of the Storage Tank.
Efficient Slurry Solutions for Modern Mink FarmsBack Flushing
System
Back Flushing SystemBoth solutions described on page 2 can be extended with ’’Back Flushing System’’.A thin fraction of slurry (after settling) is pumped either from the Storage Tank or the Reception Tank to the beginning of the slurry pipe system hence cleaning this by flushing.
In both cases the pump is lifted into the most waterish part of the slurry for increased flow and flushing.
Mixing ofStorage Tank
Submersible mixer in covered tank
Storage Tank
Back Flushing
Mink Sheds
Ø250 mm or 350 mm
Vent
Valve
Dry Installed Pump
Valve
Transfer Pipe
Pump for Back Flushing
Submersible Chopper Pump Type: DG
The pump is submerged into the slurry and is used for pumping to storage tanks, back flushing and optionally also mixing.All Landia DG pumps are equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.A wide range of standard and customized installation equipment, pipe systems, hose connections and lifting devices are available.
Slurry Pump for dry installationType: MPTK
The MPTK pump is for in-line installation outdoor or in a dry pit and can handle slurry with a high concentration of solids.The MPTK pump can be equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.We offer individual pump solutions with a choice of different flanges and connections for steel as well as PVC pipes.
Long ShaftedSlurry PumpType: MPG or TPG
The MPG & TPG pump can pump slurry with a high concentra-tion of solids – significantly more than the “average” slurry pump. The pump design is unique with pump suction from the top and the special auger.All Landia MPG & TPG pumps are equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.We offer individual pump solutions with a choice of different options such as fixed- or adjustable mixing nozzles, two-way valves, transfer pipe and pump length up to 5.4 m.
Chopper Pumps- since 1950Extremely versatile Chopper Pumps with motors ranging from 0.55 kW to 30.0 kW.The unique pump design with integrated knives prevent the pump from clogging - even in thick slurry with high dry matter content.To read more go to:www.landia.co.uk/pumps
Submersible Propeller Mixer Type: POP
The POP mixer is suitable for various mixing applications in all types of slurry and most types of tanks.The unique 3-blade propeller design offers outstanding mixing performance - even in thick slurry.An extensive range of installation equipment is available both in hot dip galvanized steel as well as stainless steel.
Propeller Mixer- since 1970Extremely versatile mixers with motors ranging from 3.0 kW to 30.0 kW. The unique 3-blade pro-peller design offers out-standing mixing performan-ce - even in thick slurry with high dry matter content.To read more go to:www.landia.co.uk/mixers
Our products are often used in aggressive environments under demanding operational conditions and with long operating times.Therefore, all Landia products are designed under the following principles:
• All components are designed so that they cannot be overloaded
• Spare parts (knives, bearings and sealing systems) are easy to replace
The need for service and maintenance is minimal. When the unit needs to be serviced, the work can usually be conducted directly on site without transport to and from a repair shop.
Serviceand Maintenance
Crane arm
Scale: Sign.: Date:
Dwg.no.:HL 14-03-2013
7212036-brochure
Branch Pipe Hose and stop tap
400L Løftekrog 400G40 400R40 400HR40 Faldlem med skydeplade Faldlem med hængsler Rustfri Rustfri – Galv. Udv. mål (bxl) Indv. mål (bxl) Udv. mål Indv. mål 60 x 49 cm 40 x 40 cm 48 x 47 cm 40 x 40 cm 402L Løftekrog 400PR40 402CG Faldlem for påboltning Nedkastningslem med vandlås Rustfri til grebning eller rensegang Udv. mål Galv. 41,5 x 41,5 cm Udv. mål Indv. mål 65 x 65 cm 58 x 58 cm 168G1 168G2 Topstang 7614000 406R110 406FR110 7614001 406R160 406FR160 7614004 Stophane for PVC-bagskyllerør Stophane for PVC-bagskyllerør Skydeventil for PVC-rør til faststøbning i kanalenderne til påboltning i kanalenderne til faststøbning Rustfri Rustfri Rustfri 7603135 Mål Mål Mål 7603146 for 110 mm PVC for 110 mm PVC for 110 mm PVC 7603157 for 160 mm PVC for 160 mm PVC for 160 mm PVC Tovejshane til PVC for 200 mm PVC Ret til ændringer af tekniske specifikationer forbeholdes. Den anførte tekst og tekniske data må ikke helt eller delvist gengives uden tílladelse fra Landia A/S. 201073DK-01-07-13
Kontakt venligst: Landia A/S Industrivej 2 DK-6940 Lem St. Tel.: 97 34 12 44 Fax: 97 34 16 98 e-mail: [email protected] www.landia.dk
Kontakt venligst: Landia A/SIndustrivej 2DK-6940 Lem St.Tel.: +45 97 34 12 44Fax: +45 97 34 16 98e-mail: [email protected]
Lan
gak
slet
gyl
lep
um
pe
Lan
dia
gyl
lep
um
pe
typ
e TP
G f
or
trak
tor
og
typ
e M
PG f
or
eld
rift
.
En d
rift
ssik
ker,
ro
bu
st p
um
pe
med
hø
j kap
acit
et t
il p
um
pn
ing
af
gyl
le o
g a
nd
re v
ansk
elig
t
pu
mp
bar
e m
edie
r.
Lan
dia
tilb
yder
ind
ivid
uel
le p
um
pel
øsn
ing
er.
•M
oto
rstø
rrel
ser
5,5
– 30
,0 k
W
•4”
, 5”
elle
r 6”
pu
mp
erø
r
•Le
vere
s ti
l fo
r- o
g la
ger
tan
ke in
dti
l 6 m
tan
kdyb
de
•V
arm
forz
inke
de
rør
og
bes
lag
•K
apac
itet
op
til
ca. 4
50 m
3/t
Spec
ial f
eatu
res:
•
Meg
et s
ervi
ceve
nlig
ko
nst
rukt
ion
•St
øb
t p
um
peh
us
og
pu
mp
ehju
l med
mak
sim
al
virk
nin
gsg
rad
•Tr
akto
rdri
ft m
ed v
inke
lgea
r.
Kan
leve
res
med
just
erb
ar
Kn
ivsy
stem
i h
ærd
et
Trak
tord
rift
med
vin
kelg
ear.
bu
nd
bla
nd
er.
stål
til
fin
del
ing
af
O
pti
mal
yd
else
:
Ekst
rau
dst
yr k
an le
vere
s fo
r h
alm
en o
g s
neg
l fo
r 54
0 rp
m. v
ed 4
”/5”
pu
mp
er
mo
nte
rin
g i
lag
erta
nk.
en
sart
et f
ød
nin
g a
f o
g 1
000
rpm
. ved
6”
pu
mp
er.
pu
mp
e si
krer
tils
top
-
nin
gsf
ri p
um
pn
ing
.
En
gin
eer
ed
to
last
Tilb
ehø
rsd
ele
til
pu
mp
esys
tem
er
En
gin
eer
ed
to
last
7712
0 ..
416-
./.
7603
1..
7212
012
7502
053/
7502
062
isole
ret
med
var
mek
abel
9340
078/
9340
079/
9340
080
163A
/B/C
174A
./.17
3A./.
174B
./.17
3B./.
167-
./.
9340
0..
174C
./.17
3C./.
164A
/B/C
2 way tap, Branch Socket and Clutch
Langakslet gyllepumpe
Landia gyllepumpe type TPG for traktor og type MPG for eldrift. En driftssikker, robust pumpe med høj kapacitet til pumpning af gylle og andre vanskeligt pumpbare medier. Landia tilbyder individuelle pumpeløsninger.
• Motorstørrelser 5,5 – 30,0 kW • 4”, 5” eller 6” pumperør • Leveres til for- og lagertanke indtil 6 m tankdybde • Varmforzinkede rør og beslag • Kapacitet op til ca. 450 m3/t
Special features:
• Meget servicevenlig konstruktion • Støbt pumpehus og pumpehjul med maksimal
virkningsgrad • Traktordrift med vinkelgear.
Kan leveres med justerbar Knivsystem i hærdet Traktordrift med vinkelgear. bundblander. stål til findeling af Optimal ydelse
Engineered to last
AccessoriesA wide range of standard and customized installation equipment, pipe systems, hose connections, control systems and lifting devices are available.
See the entire product range on: www.landia.co.uk/accessories
Automatic Control of the Slurry SystemWe offer several different control systems from the simple, manual start/stop switch to advanced programmable PLC controllers with temperature sensor, pressure sensor, frequency converter, log and remote monitoring.
The choice of control system is based on a thorough clarification of the customer’s current needs and long-termed level of ambition.
Stainless Steel Sluice Valve
Scale: Sign.: Date:
Dwg.no.:HL 14-03-2013
7614001-brochure
Transfer Pipe for Open Storage TankLevel Sensor
Transfer Pipe for Covered Storage Tank
Insulated and Heated Transfer Pipe
Scale:Sign.:Date:
Dwg.no.:HLKSK19-10-2012
3740895Overpumpningsrør 6"med varmekabel og isoleringPrinciptegning
1:25
Styret dokument
230V
Rev. date: 28-05-2013
Founded in 1933, Landia is today a modern, successful and firmly based manufacturer of a comprehensive programme of chopper pumps, propeller mixers and aerators, offering customised solutions and systems for difficult to handle liquids with high dry matter content, biomass and other organic waste. Our customers are involved in the conception and construction of biogas plants, municipal and industrial waste water treatment, processing of by-products and waste from the food industry, agricultural slurry handling and much more.
We support our customers through our subsidiaries and offices in the UK, the US, Germany and China and a worldwide net of professional distributors.
Distributor:
Landia A/SIndustrivej 2DK-6940 Lem St.Tel.: +45 97 34 12 44Fax: +45 97 34 16 98e-mail: [email protected]
BK03A.C15 21.03.2014
Top Related