User Login basic | advancedPersonal Directory Call HistorySystem SIP Provisioning Regional Phone Ext 1 User
System InformationDHCP: Disabled Current IP: 192.168.69.112Host Name: SipuraSPA Domain:Current Netmask: 255.255.255.0 Current Gateway: 192.168.69.1Primary DNS:Secondary DNS: Product InformationProduct Name: SPA-921 Serial Number: 4MJ00HB00377Software Version: 5.1.8 Hardware Version: 1.0.1(7583)MAC Address: 000E08D42AE7 Client Certificate: InstalledLicenses: None Phone StatusCurrent Time: 1/1/2003 20:52:41 Elapsed Time: 00:00:01Broadcast Pkts Sent: 0 Broadcast Bytes Sent: 0Broadcast Pkts Recv: 1 Broadcast Bytes Recv: 60Broadcast Pkts Dropped: 0 Broadcast Bytes Dropped: 0RTP Packets Sent: 0 RTP Bytes Sent: 0RTP Packets Recv: 0 RTP Bytes Recv: 0SIP Messages Sent: 2 SIP Bytes Sent: 1294SIP Messages Recv: 1 SIP Bytes Recv: 456External IP: Ext 1 StatusRegistration State: Registered Last Registration At: 1/1/2003 20:52:40Next Registration In: 3570 s Message Waiting: NoMapped SIP Port: Line 1 Call 1 StatusCall State: Idle Tone: NoneEncoder: Decoder:Type: Remote Hold:Callback: Peer Name:
Info
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 2 11/5/2009 6:31 PM
User Login basic | advancedPersonal Directory Call HistoryInfo System SIP Provisioning Regional Phone User
GeneralLine Enable: yes Share Line AppearanceShare Ext: private Shared User ID:
Subscription Expires: 3600 NAT SettingsNAT Mapping Enable: no NAT Keep Alive Enable: no
NAT Keep Alive Msg: $NOTIFY NAT Keep Alive Dest: $PROXY Network SettingsSIP TOS/DiffServ Value: 0x68 SIP CoS Value: 3
RTP TOS/DiffServ Value: 0xb8 RTP CoS Value: 6
Network Jitter Level: extremely high Jitter Buffer Adjustment: up only SIP SettingsSIP Port: 5060 SIP 100REL Enable: no
EXT SIP Port: Auth Resync-Reboot: yes
SIP Proxy-Require: SIP Remote-Party-ID: yes
Referor Bye Delay: 4 Refer-To Target Contact: no
Referee Bye Delay: 0 SIP Debug Option: full
Refer Target Bye Delay: 0 Sticky 183: no
Auth INVITE: no Call Feature SettingsBlind Attn-Xfer Enable: no MOH Server:
Message Waiting: no Auth Page: no
Default Ring: 5 Auth Page Realm:
Conference Bridge URL: Auth Page Password:
Mailbox ID: Voice Mail Server: 192.168.69.101:6060
Ext 1
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 2 11/5/2009 6:34 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
State Agent: CFWD Notify Serv: no
CFWD Notifier: Proxy and RegistrationProxy: 192.168.69.101:6060 Use Outbound Proxy: no
Outbound Proxy: Use OB Proxy In Dialog: yes
Register: yes Make Call Without Reg: no
Register Expires: 3600 Ans Call Without Reg: no
Use DNS SRV: no DNS SRV Auto Prefix: no
Proxy Fallback Intvl: 3600 Proxy Redundancy Method: Normal Subscriber InformationDisplay Name: Toolpusher User ID: 102
Password: Use Auth ID: no
Auth ID:
Mini Certificate:
SRTP Private Key: Audio ConfigurationPreferred Codec: G729a Use Pref Codec Only: yes
G729a Enable: yes G723 Enable: yes
G726-16 Enable: yes G726-24 Enable: yes
G726-32 Enable: yes G726-40 Enable: yes
Release Unused Codec: yes DTMF Process AVT: yes
Silence Supp Enable: no DTMF Tx Method: Auto Dial PlanDial Plan: (9,[3469]11S0|9,<:1408>[2-9]xxxxxx|9,<:1>[2-9]xxxxxxxxxS0|9,1[2-9]
Enable IP Dialing: yes
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 2 11/5/2009 6:34 PM
User Login basic | advancedPersonal Directory Call HistoryInfo System SIP Provisioning Regional Ext 1 User
GeneralStation Name: Toolpusher Voice Mail Number: vmm
Text Logo: Airborne Line Key 1Extension: 1 Short Name: 102
Share Call Appearance: private Miscellaneous Line Key SettingsSCA Line ID Mapping: Vertical First SCA Barge-In Enable: no Line Key LED Pattern Supplementary ServicesConference Serv: yes Attn Transfer Serv: yes
Blind Transfer Serv: yes DND Serv: no
Block ANC Serv: yes Call Back Serv: yes
Block CID Serv: yes Secure Call Serv: yes
Cfwd All Serv: no Cfwd Busy Serv: yes
Cfwd No Ans Serv: yes Paging Serv: yes
Call Park Serv: yes Call Pick Up Serv: yes
ACD Login Serv: no Group Call Pick Up Serv: yes
ACD Ext: 1 Service Annc Serv: no Ring ToneRing1: n=Classic-1;w=3;c=1
Ring2: n=Classic-2;w=3;c=2
Ring3: n=Classic-3;w=3;c=3
Ring4: n=Classic-4;w=3;c=4
Ring5: n=Simple-1;w=2;c=1
Ring6: n=Simple-2;w=2;c=2
Phone
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 2 11/5/2009 6:33 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
Ring7: n=Simple-3;w=2;c=3
Ring8: n=Simple-4;w=2;c=4
Ring9: n=Simple-5;w=2;c=5
Ring10: n=Office;w=4;c=1 Audio Input Gain (dB)Handset Input Gain: 0 Headset Input Gain: 0
Speakerphone Input Gain: 0
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 2 11/5/2009 6:33 PM
User Login basic | advancedPersonal Directory Call HistoryInfo System SIP Provisioning Phone Ext 1 User
Call Progress TonesDial Tone: 350@-19,440@-19;10(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone: 440@-19,480@-19;*(2/4/1+2)
Call Waiting Tone: 440@-10;30(.3/9.7/1)
Confirm Tone: 600@-16;1(.25/.25/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT2 Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
MWI Dial Tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone: 600@-19;25(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Page Tone: 600@-16;.3(.05/0.05/1) Distinctive Ring PatternsCadence 1: 60(2/4) Cadence 2: 60(.3/.2,1/.2,.3/4)
Cadence 3: 60(.8/.4,.8/4) Cadence 4: 60(.4/.2,.3/.2,.8/4)
Cadence 5: 60(.2/.2,.2/.2,.2/.2,1/4 Cadence 6: 60(.2/.4,.2/.4,.2/4)
Cadence 7: 60(4.5/4) Cadence 8: 60(0.25/9.75) Control Timer Values (sec)Reorder Delay: 5 Call Back Expires: 1800
Call Back Retry Intvl: 30 Call Back Delay: .5
Interdigit Long Timer: 10 Interdigit Short Timer: 3
Regional
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 3 11/5/2009 6:33 PM
Vertical Service Activation CodesCall Return Code: *69 Blind Transfer Code: *98
Call Back Act Code: *66 Call Back Deact Code: *86
Cfwd All Act Code: *72 Cfwd All Deact Code: *73
Cfwd Busy Act Code: *90 Cfwd Busy Deact Code: *91
Cfwd No Ans Act Code: *92 Cfwd No Ans Deact Code: *93
CW Act Code: *56 CW Deact Code: *57
CW Per Call Act Code: *71 CW Per Call Deact Code: *70
Block CID Act Code: *67 Block CID Deact Code: *68
Block CID Per Call Act Code: *81 Block CID Per Call Deact Code: *82
Block ANC Act Code: *77 Block ANC Deact Code: *87
DND Act Code: *78 DND Deact Code: *79
Secure All Call Act Code: *16 Secure No Call Act Code: *17
Secure One Call Act Code: *18 Secure One Call Deact Code: *19
Paging Code: *96 Call Park Code: *38
Call Pickup Code: *36 Call UnPark Code: *39
Group Call Pickup Code: *37
Referral Services Codes:
Feature Dial Services Codes: Vertical Service Announcement CodesService Annc Base Number:
Service Annc Extension Codes: Outbound Call Codec Selection CodesPrefer G711u Code: *017110 Force G711u Code: *027110
Prefer G711a Code: *017111 Force G711a Code: *027111
Prefer G723 Code: *01723 Force G723 Code: *02723
Prefer G726r16 Code: *0172616 Force G726r16 Code: *0272616
Prefer G726r24 Code: *0172624 Force G726r24 Code: *0272624
Prefer G726r32 Code: *0172632 Force G726r32 Code: *0272632
Prefer G726r40 Code: *0172640 Force G726r40 Code: *0272640
Prefer G729a Code: *01729 Force G729a Code: *02729 MiscellaneousSet Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: GMT-08:00 Time Offset (HH/mm):
Daylight Saving Time Rule: start=4/1/7;end=10/-1/7;save=1
DTMF Playback Level: -16 DTMF Playback Length: .1
Inband DTMF Boost: 12dB
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 3 11/5/2009 6:33 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
Sipura SPA Configuration http://192.168.69.112/admin/advanced
3 of 3 11/5/2009 6:33 PM
User Login basic | advancedPersonal Directory Call HistoryInfo System SIP Regional Phone Ext 1 User
Configuration ProfileProvision Enable: yes Resync On Reset: yes
Resync Random Delay: 2 Resync Periodic: 0
Resync Error Retry Delay: 3600 Forced Resync Delay: 14400
Resync From SIP: yes Resync After Upgrade Attempt: yes
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF: yes
Profile Rule: 192.168.69.101:69/cfg/generic.xml
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg: $PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH
Log Resync Success Msg: $PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH
Log Resync Failure Msg: $PN $MAC -- Resync failed: $ERR
Report Rule: Firmware UpgradeUpgrade Enable: yes Upgrade Error Retry Delay: 3600
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg: $PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH
Log Upgrade Success Msg: $PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ER
Log Upgrade Failure Msg: $PN $MAC -- Upgrade failed: $ERR
License Keys: General Purpose ParametersGPP A:
GPP B:
GPP C:
GPP D:
Provisioning
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 2 11/5/2009 6:33 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 2 11/5/2009 6:33 PM
User Login basic | advancedPersonal Directory Call HistoryInfo System Provisioning Regional Phone Ext 1 User
SIP ParametersMax Forward: 70 Max Redirection: 5
Max Auth: 2 SIP User Agent Name: $VERSION
SIP Server Name: $VERSION SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type: application/dtmf-relay
Remove Last Reg: no Use Compact Header: no
Escape Display Name: no SIP-B Enable: no
Talk Package: no Hold Package: no
Conference Package: no Notify Conference: no
RFC 2543 Call Hold: yes Random REG CID On Reboot: no SIP Timer Values (sec)SIP T1: .5 SIP T2: 4
SIP T4: 5 SIP Timer B: 16
SIP Timer F: 16 SIP Timer H: 16
SIP Timer D: 16 SIP Timer J: 16
INVITE Expires: 240 ReINVITE Expires: 30
Reg Min Expires: 1 Reg Max Expires: 7200
Reg Retry Intvl: 30 Reg Retry Long Intvl: 1200
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap: Sub Min Expires: 10
Sub Max Expires: 7200 Sub Retry Intvl: 10 Response Status Code HandlingSIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC: RTP ParametersRTP Port Min: 16384 RTP Port Max: 16482
RTP Packet Size: 0.030 Max RTP ICMP Err: 0
SIP
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 2 11/5/2009 6:32 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
RTCP Tx Interval: 0 No UDP Checksum: no
Symmetric RTP: no Stats In BYE: no SDP Payload TypesAVT Dynamic Payload: 101 INFOREQ Dynamic Payload:
G726r16 Dynamic Payload: 98 G726r24 Dynamic Payload: 97
G726r32 Dynamic Payload: 2 G726r40 Dynamic Payload: 96
G729b Dynamic Payload: 99 AVT Codec Name: telephone-event
G711u Codec Name: PCMU G711a Codec Name: PCMA
G726r16 Codec Name: G726-16 G726r24 Codec Name: G726-24
G726r32 Codec Name: G726-32 G726r40 Codec Name: G726-40
G729a Codec Name: G729a G729b Codec Name: G729ab
G723 Codec Name: G723 NAT Support ParametersHandle VIA received: no Handle VIA rport: no
Insert VIA received: no Insert VIA rport: no
Substitute VIA Addr: no Send Resp To Src Port: no
STUN Enable: no STUN Test Enable: no
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl: 15 Linksys Key System ParametersLinksys Key System: yes Multicast Address: 224.168.168.168:6061
Force LAN Codec: none
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 2 11/5/2009 6:32 PM
User Login basic | advancedPersonal Directory Call History
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
Info SIP Provisioning Regional Phone Ext 1 User
System ConfigurationRestricted Access Domains:
Enable Web Server: yes Web Server Port: 80
Enable Web Admin Access: yes Admin Passwd:
User Password: Internet Connection TypeDHCP: no
Static IP: 192.168.69.112 NetMask: 255.255.255.0
Gateway: 192.168.69.1 Optional Network ConfigurationHostName: Domain:
Primary DNS: Secondary DNS:
DNS Server Order: Manual DNS Query Mode: Parallel
Syslog Server: 192.168.69.104 Debug Server: 192.168.69.104
Debug Level: 3 Primary NTP Server:
Secondary NTP Server: VLAN SettingsEnable VLAN: no VLAN ID: 1
System
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 1 11/5/2009 6:32 PM
User Login basic | advancedPersonal Directory Call History
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
Info System SIP Provisioning Regional Phone Ext 1
Call ForwardCfwd All Dest: Cfwd Busy Dest: vm
Cfwd No Ans Dest: vm Cfwd No Ans Delay: 20 Speed DialSpeed Dial 2: pagegroup Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9: Supplementary ServicesCW Setting: yes Block CID Setting: no
Block ANC Setting: no DND Setting: no
Secure Call Setting: no Dial Assistance: no
Auto Answer Page: yes Preferred Audio Device: Speaker
Send Audio To Speaker: no Time Format: 12hr
Date Format: month/day Miss Call Shortcut: yes Audio VolumeRinger Volume: 15 Speaker Volume: 15
Handset Volume: 13 Headset Volume: 10
Lcd Contrast: 3
User
Sipura SPA Configuration http://192.168.69.112/admin/advanced
1 of 1 11/5/2009 6:34 PM
Router Voice
PBX Status
User Login basic | advancedInfo System SIP Provisioning Regional FXS 1 FXS 2 Line 2 Line 3 Line 4
Line Enable: yes Network SettingsSIP ToS/DiffServ Value: 0x68 SIP CoS Value: 3 [0-7]
RTP ToS/DiffServ Value: 0xb8 RTP CoS Value: 6 [0-7] SIP SettingsSIP Transport: UDP SIP Port: 5060
SIP 100REL Enable: no Auth Resync-Reboot: yes
SIP Proxy-Require: SIP Remote-Party-ID: yes
SIP GUID: no SIP Debug Option: full
Restrict Source IP: no Referor Bye Delay: 4
Refer Target Bye Delay: 0 Referee Bye Delay: 0
Refer-To Target Contact: yes Auth INVITE: no
Use Anonymous With RPID: yes Use Local Addr In FROM: no Subscriber InformationDisplay Name: Airborne User ID: SPA941-001-001
Password: ************* Use Auth ID: yes
Auth ID: aSPA941-001-001 Call Capacity: unlimited
Contact List: 2142693216:aa|2142693217:+101,cfwd=aa|2142693218:+102,cfwd=aa|
Cfwd No Ans Delay: 20 Dial PlanDial Plan: (<9:>xx.) NAT SettingsNAT Mapping Enable: no NAT Keep Alive Enable: no
NAT Keep Alive Msg: $NOTIFY NAT Keep Alive Dest: $PROXY
EXT SIP Port:
Line 1
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 2 11/5/2009 6:29 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Proxy and RegistrationProxy: squire.voiptrunkingsite.net
Outbound Proxy: outbound.voippbxsite.net:7060
Use Outbound Proxy: yes Use OB Proxy In Dialog: yes
Register: yes Make Call Without Reg: no
Register Expires: 3600 Ans Call Without Reg: no
Use DNS SRV: no DNS SRV Auto Prefix: no
Proxy Fallback Intvl: 3600 Proxy Redundancy Method: Normal
Mailbox Status: Mailbox Subscribe URL:
Mailbox Deposit URL: Mailbox Subscribe Expires: 2147483647
Mailbox Manage URL: VMSP Bridge: None
CFWD Bridge Mode: none XFER Bridge Mode: none
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
2 of 2 11/5/2009 6:29 PM
Router Voice
PBX Status
User Login basic | advancedInfo System SIP Provisioning FXS 1 FXS 2 Line 1 Line 2 Line 3 Line 4
Call Progress TonesDial Tone: 350@-19,440@-19;10(*/0/1+2)
Second Dial Tone: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone: 440@-19,480@-19;*(2/4/1+2)
Confirm Tone: 600@-16;1(.25/.25/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT2 Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
MWI Dial Tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone: 350@-16;*(.1/.1/1) Distinctive Ring PatternsRing1 Cadence: 60(2/4) Ring2 Cadence: 60(.8/.4,.8/4)
Ring3 Cadence: 60(.4/.2,.4/.2,.8/4) Ring4 Cadence: 60(.3/.2,1/.2,.3/4)
Ring5 Cadence: 1(.5/.5) Ring6 Cadence: 60(.2/.4,.2/.4,.2/4)
Ring7 Cadence: 60(.4/.2,.4/.2,.4/4) Ring8 Cadence: 60(0.25/9.75)
Ring9 Cadence: 60(.4/.2,.4/2) Distinctive Call Waiting Tone Patterns
Regional
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 3 11/5/2009 6:28 PM
CWT1 Cadence: 30(.3/9.7) CWT2 Cadence: 30(.1/.1, .1/9.7)
CWT3 Cadence: 30(.1/.1, .1/.1, .1/9.7) CWT4 Cadence: 30(.1/.1,.3/.1,.1/9.3)
CWT5 Cadence: 1(.5/.5) CWT6 Cadence: 30(.1/.1,.3/.2,.3/9.1)
CWT7 Cadence: 30(.3/.1,.3/.1,.1/9.1) CWT8 Cadence: 2.3(.3/2)
CWT9 Cadence: 30(.3/9.7) Distinctive Ring/CWT Pattern NamesRing1 Name: Bellcore-r1 Ring2 Name: Bellcore-r2
Ring3 Name: Bellcore-r3 Ring4 Name: Bellcore-r4
Ring5 Name: Bellcore-r5 Ring6 Name: Bellcore-r6
Ring7 Name: Bellcore-r7 Ring8 Name: Bellcore-r8
Ring9 Name: Bellcore-r9 Ring and Call Waiting Tone SpecRing Waveform: Trapezoid Ring Frequency: 20
Ring Voltage: 85 CWT Frequency: 440@-10 Control Timer Values (sec)Hook Flash Timer Min: .1 Hook Flash Timer Max: .9
Callee On Hook Delay: 0 Reorder Delay: 5
Call Back Expires: 1800 Call Back Retry Intvl: 30
Call Back Delay: .5 VMWI Refresh Intvl: 0
Interdigit Long Timer: 10 Interdigit Short Timer: 3
CPC Delay: 2 CPC Duration: 0 Vertical Service Activation CodesCall Return Code: *69 Call Redial Code: *07
Blind Transfer Code: *98 Call Back Act Code: *66
Call Back Deact Code: *86 Call Back Busy Act Code: *05
Cfwd All Act Code: *72 Cfwd All Deact Code: *73
Cfwd Busy Act Code: *90 Cfwd Busy Deact Code: *91
Cfwd No Ans Act Code: *92 Cfwd No Ans Deact Code: *93
Cfwd Last Act Code: *63 Cfwd Last Deact Code: *83
Block Last Act Code: *60 Block Last Deact Code: *80
Accept Last Act Code: *64 Accept Last Deact Code: *84
CW Act Code: *56 CW Deact Code: *57
CW Per Call Act Code: *71 CW Per Call Deact Code: *70
Block CID Act Code: *67 Block CID Deact Code: *68
Block CID Per Call Act Code: *81 Block CID Per Call Deact Code: *82
Block ANC Act Code: *77 Block ANC Deact Code: *87
DND Act Code: *78 DND Deact Code: *79
CID Act Code: *65 CID Deact Code: *85
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
2 of 3 11/5/2009 6:28 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
CWCID Act Code: *25 CWCID Deact Code: *45
Dist Ring Act Code: *26 Dist Ring Deact Code: *46
Speed Dial Act Code: *74 Secure All Call Act Code: *16
Secure No Call Act Code: *17 Secure One Call Act Code: *18
Secure One Call Deact Code: *19 Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code: *99
FAX Line Toggle Code: #99 Media Loopback Code: *03
Referral Services Codes:
Feature Dial Services Codes: Vertical Service Announcement CodesService Annc Base Number:
Service Annc Extension Codes: Outbound Call Codec Selection CodesPrefer G711u Code: *017110 Force G711u Code: *027110
Prefer G711a Code: *017111 Force G711a Code: *027111
Prefer G723 Code: *01723 Force G723 Code: *02723
Prefer G726r16 Code: *0172616 Force G726r16 Code: *0272616
Prefer G726r24 Code: *0172624 Force G726r24 Code: *0272624
Prefer G726r32 Code: *0172632 Force G726r32 Code: *0272632
Prefer G726r40 Code: *0172640 Force G726r40 Code: *0272640
Prefer G729a Code: *01729 Force G729a Code: *02729 MiscellaneousSet Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: GMT-08:00 FXS Port Impedance: 600
Daylight Saving Time Rule: start=4/1/7;end=10/-1/7;save=1
Daylight Saving Time Enable: yes FXS Port Input Gain: -3
FXS Port Output Gain: -3 DTMF Playback Level: -16
DTMF Playback Length: .1 Detect ABCD: yes
Playback ABCD: yes Caller ID Method: Bellcore(N.Amer,China)
Caller ID FSK Standard: bell 202 Feature Invocation Method: Default
More Echo Suppression: no
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
3 of 3 11/5/2009 6:28 PM
Router Voice
PBX Status
User Login basic | advancedInfo System SIP Regional FXS 1 FXS 2 Line 1 Line 2 Line 3 Line 4
Configuration ProfileProvision Enable: yes Resync On Reset: yes
Resync Random Delay: 2 Resync Periodic: 3600
Resync Error Retry Delay: 3600 Forced Resync Delay: 14400
Resync From SIP: yes Resync After Upgrade Attempt: yes
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF: yes
Profile Rule: /spa$PSN.cfg
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg: $PN $MAC -- Requesting resync $SCHEME://$SERVIP:$PORT$PATH
Log Resync Success Msg: $PN $MAC -- Successful resync $SCHEME://$SERVIP:$PORT$PATH
Log Resync Failure Msg: $PN $MAC -- Resync failed: $ERR
Report Rule: Firmware UpgradeUpgrade Enable: yes Upgrade Error Retry Delay: 3600
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg: $PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH
Log Upgrade Success Msg: $PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ER
Log Upgrade Failure Msg: $PN $MAC -- Upgrade failed: $ERR
License Keys: General Purpose ParametersGPP A:
GPP B:
Provisioning
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 2 11/5/2009 6:28 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
2 of 2 11/5/2009 6:28 PM
Router Voice
PBX Status
User Login basic | advancedInfo System Provisioning Regional FXS 1 FXS 2 Line 1 Line 2 Line 3 Line 4
SIP ParametersMax Forward: 70 Max Redirection: 5
Max Auth: 2 SIP User Agent Name: $VERSION
SIP Server Name: $VERSION SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type: application/dtmf-relay
Hook Flash MIME Type: application/hook-flash Remove Last Reg: no
Use Compact Header: no Escape Display Name: yes
RFC 2543 Call Hold: yes Mark All AVT Packets: yes
SIP TCP Port Min: 5060 SIP TCP Port Max: 7080 SIP Timer Values (sec)SIP T1: .5 SIP T2: 4
SIP T4: 5 SIP Timer B: 32
SIP Timer F: 32 SIP Timer H: 32
SIP Timer D: 32 SIP Timer J: 32
INVITE Expires: 240 ReINVITE Expires: 30
Reg Min Expires: 1 Reg Max Expires: 7200
Reg Retry Intvl: 30 Reg Retry Long Intvl: 1200
Reg Retry Random Delay: Reg Retry Long Random Delay:
Reg Retry Intvl Cap: Response Status Code HandlingSIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC: RTP ParametersRTP Port Min: 16384 RTP Port Max: 16482
RTP Packet Size: 0.030 Max RTP ICMP Err: 0
RTCP Tx Interval: 0 No UDP Checksum: no
SIP
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 3 11/5/2009 6:27 PM
Stats In BYE: no SDP Payload TypesNSE Dynamic Payload: 100 AVT Dynamic Payload: 101
INFOREQ Dynamic Payload: G726r16 Dynamic Payload: 98
G726r24 Dynamic Payload: 97 G726r32 Dynamic Payload: 2
G726r40 Dynamic Payload: 96 G729b Dynamic Payload: 99
EncapRTP Dynamic Payload: 112 RTP-Start-Loopback Dynamic Payload: 113
RTP-Start-Loopback Codec: G711u NSE Codec Name: NSE
AVT Codec Name: telephone-event G711u Codec Name: PCMU
G711a Codec Name: PCMA G726r16 Codec Name: G726-16
G726r24 Codec Name: G726-24 G726r32 Codec Name: G726-32
G726r40 Codec Name: G726-40 G729a Codec Name: G729a
G729b Codec Name: G729ab G723 Codec Name: G723
EncapRTP Codec Name: encaprtp NAT Support ParametersHandle VIA received: no Handle VIA rport: no
Insert VIA received: no Insert VIA rport: no
Substitute VIA Addr: no Send Resp To Src Port: no
STUN Enable: no STUN Test Enable: no
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl: 15 PBX ParametersProxy Network Interface: WAN Proxy Listen Port: 6060
Multicast Address: 224.168.168.168:6061 Group Page Address: 224.168.168.168:3456
Max Expires: 3600 Force Media Proxy: no
Proxy Debug Option: none
Call Routing Rule: (<:L1,2,3,4>9xx.)
Call Park MOH Server: imusic Call Park DLG Refresh Intvl: 0
Default Group Line: 1,2,3,4 Group 1 User ID:
Group 1 Line: Group 2 User ID:
Group 2 Line: Group 3 User ID:
Group 3 Line: Group 4 User ID:
Group 4 Line:
Hunt Groups:
SIP DIDN Field: TO Param SIP DIDN Param Name: didn
Accept All MWI As Line: Current Phone DLG Refresh Intvl: 0 Internal Music Source ParametersInternal Music URL: imusic
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
2 of 3 11/5/2009 6:27 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Internal Music Script: 2(0/230954),2(230954/444720),(0/230954)40000
Internal MOH Refresh Intvl: 0 Internal Music LBR Codec: G729a
Internal Music Preferred Codec: G711u Internal Music Use Pref Codec Only: no Auto Attendant ParametersAA Dial Plan 1: (10x|xxx.)
AA Dial Plan 2: (<:10>x|xxx.)
AA script 1: <aa><form id="dir" type="menu"><audio src="prompt1" bargein="T"/><
AA script 2:
AA script 3:
DayTime AA: yes Day Time:
DayTime AA Script: 1 DayTime Answer Delay: 12
NightTime AA: no NightTime AA Script: 1
NightTime Answer Delay: 0 Weekend/Holiday AA: no
Weekends/Holidays: Weekend/Holiday AA Script: 1
Weekend/Holiday Answer Delay: 0 AA LBR Codec: G729a
AA Preferred Codec: G711u AA Use Pref Codec Only: no
AA Decode Inband DTMF: no
AA Prompts URL Script: PBX Phone ParametersNext Auto User ID: 139 Phone Ext Password:
Phone Upgrade Rule:
Phone Dial Plan: (9,[3469]11S0|9,<:1408>[2-9]xxxxxx|9,<:1>[2-9]xxxxxxxxxS0|9,1[2-9]
Phone Config XML:
Use LVS_PROXY: no CTI Enable: no
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
3 of 3 11/5/2009 6:27 PM
Router Voice
PBX Status
User Login basic | advanced
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Info SIP Provisioning Regional FXS 1 FXS 2 Line 1 Line 2 Line 3 Line 4
System ConfigurationRestricted Access Domains:
Enable Web Admin Access: yes Admin Passwd:
User Password: Miscellaneous SettingsSyslog Server: 192.168.69.104 Debug Server: 192.168.69.104
Debug Level: 3
System
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 1 11/5/2009 6:26 PM
Router Voice
PBX Status
User Login basic | advancedSystem SIP Provisioning Regional FXS 1 FXS 2 Line 1 Line 2 Line 3 Line 4
Product InformationProduct Name: SPA9000 Serial Number: FM700F202700Software Version: 6.1.5 Hardware Version: 1.0.5MAC Address: 000E08E0CDB9 Client Certificate: InstalledCustomization: Open Licenses: None System StatusCurrent Time: 1/1/2003 21:19:24 Elapsed Time: 07:12:18 FXS 1 StatusHook State: On Message Waiting: NoCall Back Active: No Last Called Number:Last Caller Number:Call 1 State: Idle Call 2 State: IdleCall 1 Tone: None Call 2 Tone: NoneCall 1 Encoder: Call 2 Encoder:Call 1 Decoder: Call 2 Decoder:Call 1 FAX: Call 2 FAX:Call 1 Type: Call 2 Type:Call 1 Remote Hold: Call 2 Remote Hold:Call 1 Callback: Call 2 Callback:Call 1 Peer Name: Call 2 Peer Name:Call 1 Peer Phone: Call 2 Peer Phone:Call 1 Duration: Call 2 Duration:Call 1 Packets Sent: Call 2 Packets Sent:Call 1 Packets Recv: Call 2 Packets Recv:Call 1 Bytes Sent: Call 2 Bytes Sent:Call 1 Bytes Recv: Call 2 Bytes Recv:Call 1 Decode Latency: Call 2 Decode Latency:Call 1 Jitter: Call 2 Jitter:Call 1 Round Trip Delay: Call 2 Round Trip Delay:Call 1 Packets Lost: Call 2 Packets Lost:Call 1 Packet Error: Call 2 Packet Error:
Info
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
1 of 3 11/5/2009 6:26 PM
FXS 2 StatusHook State: On Message Waiting: NoCall Back Active: No Last Called Number:Last Caller Number:Call 1 State: Idle Call 2 State: IdleCall 1 Tone: None Call 2 Tone: NoneCall 1 Encoder: Call 2 Encoder:Call 1 Decoder: Call 2 Decoder:Call 1 FAX: Call 2 FAX:Call 1 Type: Call 2 Type:Call 1 Remote Hold: Call 2 Remote Hold:Call 1 Callback: Call 2 Callback:Call 1 Peer Name: Call 2 Peer Name:Call 1 Peer Phone: Call 2 Peer Phone:Call 1 Duration: Call 2 Duration:Call 1 Packets Sent: Call 2 Packets Sent:Call 1 Packets Recv: Call 2 Packets Recv:Call 1 Bytes Sent: Call 2 Bytes Sent:Call 1 Bytes Recv: Call 2 Bytes Recv:Call 1 Decode Latency: Call 2 Decode Latency:Call 1 Jitter: Call 2 Jitter:Call 1 Round Trip Delay: Call 2 Round Trip Delay:Call 1 Packets Lost: Call 2 Packets Lost:Call 1 Packet Error: Call 2 Packet Error: Line 1 StatusRegistration State: Registered Last Registration At: 1/1/2003 21:19:22Next Registration In: 26 s Message Waiting: NoMapped SIP Port: Line 2 StatusRegistration State: Not Registered Last Registration At:Next Registration In: Message Waiting: NoMapped SIP Port: Line 3 StatusRegistration State: Not Registered Last Registration At:Next Registration In: Message Waiting: NoMapped SIP Port: Line 4 StatusRegistration State: Not Registered Last Registration At:Next Registration In: Message Waiting: NoMapped SIP Port:
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
2 of 3 11/5/2009 6:26 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Auto Attendant Prompt StatusPrompt 1: Default Prompt 2: DefaultPrompt 3: Default Prompt 4: DefaultPrompt 5: 0 ms Prompt 6: 0 msPrompt 7: 0 ms Prompt 8: 0 msPrompt 9: 0 ms Prompt 10: 0 msSpace Remaining: 94500 ms Current AA: Daytime Internal Music StatusInstalled Music Path: Factory Default
Linksys SPA Configuration http://192.168.69.101/admin/voice/advanced
3 of 3 11/5/2009 6:26 PM
Router Voice
PBX Status
User Login basic | advancedStatus Wan Setup Lan Setup
Enable Service Name Starting Port Ending Port Protocol Server IP Addressno 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0no 0 0 TCP 192.168.0. 0
Port Forwarding Settings
DMZ SettingsEnable DMZ: no
DMZ Host IP Address: 192.168.0.0 Miscellaneous SettingsMulticast Passthru: Disabled System Reserved Ports RangeStarting Port: 50000 (+10000) Num of Ports Reserved: 256
Application
Linksys SPA Configuration http://192.168.69.101/admin/advanced
1 of 2 11/5/2009 6:25 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Linksys SPA Configuration http://192.168.69.101/admin/advanced
2 of 2 11/5/2009 6:25 PM
Router Voice
PBX Status
User Login basic | advanced
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Status Wan Setup Application
Enable Host Mac Address Host IP Address no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0 no 000000000000 192.168.0. 0
Networking Service: NAT LAN Network SettingsLAN IP Address: 192.168.0.1 LAN Subnet Mask: 255.255.255.0
Enable DHCP Server: yes DHCP Lease Time: 24 Hours
DHCP Client Starting IP Address: 192.168.0.2 Number of Client IP Addresses: 50 Static DHCP Lease Settings
Lan Setup
Linksys SPA Configuration http://192.168.69.101/admin/advanced
1 of 1 11/5/2009 6:25 PM
Router Voice
PBX Status
User Login basic | advancedStatus Lan Setup Application
Internet Connection SettingsConnection Type: Static IP Static IP SettingsStatic IP: 192.168.69.101 NetMask: 255.255.255.0
Gateway: 192.168.69.1 PPPoE SettingsPPPOE Login Name: PPPOE Login Password:
PPPOE Service Name: Optional SettingsHostName: Domain:
Primary DNS: 216.236.126.230 Secondary DNS: 64.40.160.10
DNS Server Order: Manual DNS Query Mode: Parallel
Primary NTP Server: Secondary NTP Server:
DHCP IP Revalidate Timer: 0 Minutes MAC Clone SettingsEnable MAC Clone Service: no Cloned MAC Address: Remote ManagementEnable WAN Web Server: yes WAN Web Server Port: 80 QOS SettingsQOS Policy: Always On
QOS QDisc: NONE Maximum Uplink Speed: 128 (Kbps) VLAN SettingsEnable VLAN: no VLAN ID: 1 [0x000-0xFFF]
Wan Setup
Linksys SPA Configuration http://192.168.69.101/admin/advanced
1 of 2 11/5/2009 6:23 PM
PBX Status
User Login basic | advanced
Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.
Linksys SPA Configuration http://192.168.69.101/admin/advanced
2 of 2 11/5/2009 6:23 PM
Registration Station User ID IP Address Reg Expires(s) User-AgentCompanyman 101 192.168.69.111 2552 Linksys/SPA921-5.1.8Toolpusher 102 192.168.69.112 1877 Linksys/SPA921-5.1.8Driller 103 192.168.69.113 2549 Linksys/SPA921-5.1.8
Linksys SPA Configuration http://192.168.69.101/admin/status
1 of 1 11/5/2009 6:29 PM
User Login basic | advanced
Copyright © 2003-2005 Sipura Technology. All Rights Reserved.
Peer Phone: Duration:Packets Sent: Packets Recv:Bytes Sent: Bytes Recv:Decode Latency: Jitter:Round Trip Delay: Packets Lost:Packet Error: Mapped RTP Port: Line 1 Call 2 StatusCall State: Idle Tone: NoneEncoder: Decoder:Type: Remote Hold:Callback: Peer Name:Peer Phone: Duration:Packets Sent: Packets Recv:Bytes Sent: Bytes Recv:Decode Latency: Jitter:Round Trip Delay: Packets Lost:Packet Error: Mapped RTP Port: Downloaded Ring ToneStatus: IdleRing Tone 1: Not InstalledRing Tone 2: Not Installed
Sipura SPA Configuration http://192.168.69.112/admin/advanced
2 of 2 11/5/2009 6:31 PM
Top Related