SERRATED LOCK WASHERS
RONDELLES À DENTURE
ARANDELAS DENTADAS
DIN 6798 A
DIN 6797 J
DIN 6797 A
RDIFL
DIN 6798 V
DIN 6798 J
RDEFL
RDD
DIN 6907 RDIFS
3
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830How to order BENERI products: prefix the part number with “R129-”part number example: R129-DIN 471-3
110TECHNICAL INFORMATION: ARTICLESINFORMATIONS TECHNIQUES: ARTICLESINFORMACIÓN TÉCNICA: ARTÍCULOS
ARTICLES ARTICLES ARTÍCULOS
DIN 6798 TYPE AThese washers are recommended in order to get optimal clamping on flat surfaces.They are suitable when the bearing surface is larger than the external diameter of the washer.
DIN 6798 TYPE JFor an optimal clamping, these washers are recommended on non-flat surfaces.
DIN 6798 TYPE VThe use of this washer is exclusively recommended when clamping conical head screws.
DIN 6797 TYPE AFor a moderate clamping, the use of these washers is recommended on flat surfaces and when the bearing surface is greater than the external diameter of the washer.
DIN 6797 TYPE JFor a moderate clamping, the use of these washers is recommended on non flat surfaces.
RDEFL - Large band externaltoothed washersThe use of these washers is recommended when the diameter of the bore is significantly larger than the diameter of the screw and the bearing surfaces is flat.
DIN 6798 TIPO APara obtener la mejor fijación, se aconseja utilizar estas arandelas sobre superficies planas y cuando la superficie de apoyo es superior al diámetro externo de la arandela.
DIN 6798 TIPO JPara obtener la mejor fijación, se aconseja utilizar estas arandelas cuando la superficie de apoyo no es plana.
DIN 6798 TIPO VSe aconseja utilizar estas arandelas exclusivamente para la fijación de tornillos de cabeza cónica.
DIN 6797 TIPO APara obtener una buena fijación, se aconseja utilizar estas arandelas sobre superficies planas y cuando la superficie de apoyo es superior al diámetro externo de la arandela.
DIN 6797 TIPO JPara obtener una buena fijación, se aconseja utilizar estas arandelas cuando la superficie de apoyo no es plana.
RDEFL - Arandelas con dentado externo de franja anchaSe aconseja utilizar esas arandelas cuando el diámetro del orificio de paso sea sensiblemente superior al diámetro del tornillo y la superficie de apoyo sea plana.
DIN 6798 TYPE APour que le blocage soit parfait nous vous conseillons d’utiliser ces rondelles sur des surfaces plates et lorsque la surface de contact dépasse le diamètre extérieur de la rondelle.
DIN 6798 TYPE JPour que le blocage soit parfait nous vous conseillons d’utiliser ces rondelles lorsque la surface de contact n’est pas plate.
DIN 6798 TYPE VNous vous conseillons d’utiliser ces rondelles uniquement pour bloquer les vis à tête conique.
DIN 6797 TYPE APour que le blocage soit acceptable nous vous conseillons d’utiliser ces rondelles sur des surfaces plates et lorsque la surface de contact dépasse le diamètre extérieur de la rondelle.
DIN 6797 TYPE JPour que le blocage soit acceptable nous vous conseillons d’utiliser ces rondelles lorsque la surface de contact n’est pas plate.
RDEFL - Rondelles à denture extérieure et à bande largeNous vous conseillons d’utiliser ces rondelles lorsque le diamètre de l’orifice de passage dépasse sensiblement le diamètre de la vis et que la surface de contact est plate.
DIN 6798 A Serrated lock washers, Rondelles à denture Arandelas con dentado external teeth extérieure externo
DIN 6798 J Serrated lock washers, Rondelles à denture Arandelas dentadas
internal teeth intérieure cónicas
DIN 6798 V Countersunk toothed washers Rondelles à denture conique Fächerscheiben mit Verzahnung
- versenkbar
DIN 6797 A Serrated lock washers, Rondelles à denture Arandelas con dentado
external teeth extérieure externo
DIN 6797 J Serrated lock washers, Rondelles à denture Arandelas con dentado
internal teeth intérieure interno
RDEFL Large band external toothed Rondelles à denture Arandelas con dentado externo
washers extérieure et à bande large de franja ancha
RDIFL Large band internal toothed Rondelles à denture Arandelas con dentado interno
washers intérieure et à bande large de franja ancha
RDD Double toothed washers Rondelles à double denture Arandelas con dentado doble
DIN 6907 Toothed washers for Rondelles à denture extérieure Arandelas con dentado externo
pre-assembled screws pour vis pré-assemblées para tornillos pre-ensamblados
RDIFS Narrow band internal toothed Rondelles à denture intérieure Arandelas con dentado interno
washers et à bande étroite de franja estrecha
3
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
111TECHNICAL INFORMATION: MATERIALS AND HARDNESS
INFORMATIONS TECHNIQUES: MATÉRIAUX ET DURETÉINFORMACIÓN TÉCNICA: MATERIALES Y DUREZA
RDIFL - Large band internaltoothed washersThe use of these washers is recommended when the diameter of the bore is significantly larger than the diameter of the screw or the bore is lengthened and the bearing surface is not flat.
RDD - Double toothed washersThe use of these washers is recommended when the diameter of the bore is significantly larger than the diameter of the screw or the bore is lengthened and the bearing surface is flat.
DIN 6907The use of these washers is exclusively reserved to pre-assemble with metric lead screws.
RDIFS - Narrow band internaltoothed washersThe use of these washers is recommended when the bearing surface is limited.
RDIFL - Arandelas con dentado externo de franja anchaSe aconseja utilizar esas arandelas cuando el diámetro del orificio de paso sea sensiblemente superior al diámetro del tornillo o si el orificio de paso es alargado y la superficie de apoyo no es plana.
RDD - Arandelas con dentado dobleSe aconseja utilizar esas arandelas cuando el diámetro del orificio de paso sea sensiblemente superior al diámetro del tornillo o si el orificio de paso es alargado y la superficie de apoyo es plana.
DIN 6907El uso de estas arandelas está reservado exclusivamente al pre-ensamblado con tornillos de paso métrico.
RDIFS - Arandelas con dentado interno de franja estrechaSe aconseja utilizar estas arandelas cuando se tiene poca superficie de apoyo.
RDIFL - Rondelles à denture intérieure et à bande largeNous vous conseillons d’utiliser ces rondelles lorsque le diamètre de l’orifice de passage dépasse sensiblement le diamètre de la vis et que la surface de contact n’est pas plate.
RDD - Rondelles à double dentureNous vous conseillons d’utiliser ces rondelles lorsque le diamètre de l’orifice de passage dépasse sensiblement le diamètre de la vis ou que l’orifice de passage est oblong et la surface de contact est plate.
DIN 6907Nous vous conseillons d’utiliser ces rondelles uniquement pour le pré-assemblage avec des vis à pas métrique.
RDIFS - Rondelles à denture intérieure et à bande étroiteNous vous conseillons d’utiliser ces rondelles lorsque la surface de contact est réduite.
Spring steel: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
Acero para muelles: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
Acier à ressort: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
MATERIAL MATÉRIAU MATERIAL
3DIN 6798 A Serrated lock washers, Rondelles à denture Arandelas con dentado external teeth extérieure externo
DIN 6798 J Serrated lock washers, Rondelles à denture Arandelas dentadas
internal teeth intérieure cónicas
DIN 6798 V Countersunk toothed washers Rondelles à denture conique Fächerscheiben mit Verzahnung
- versenkbar
DIN 6797 A Serrated lock washers, Rondelles à denture Arandelas con dentado
external teeth extérieure externo
DIN 6797 J Serrated lock washers, Rondelles à denture Arandelas con dentado
internal teeth intérieure interno
RDEFL Large band external toothed Rondelles à denture Arandelas con dentado externo
washers extérieure et à bande large de franja ancha
RDIFL Large band internal toothed Rondelles à denture Arandelas con dentado interno
washers intérieure et à bande large de franja ancha
RDD Double toothed washers Rondelles à double denture Arandelas con dentado doble
DIN 6907 Toothed washers for Rondelles à denture extérieure Arandelas con dentado externo
pre-assembled screws pour vis pré-assemblées para tornillos pre-ensamblados
RDIFS Narrow band internal toothed Rondelles à denture intérieure Arandelas con dentado interno
washers et à bande étroite de franja estrecha
Spring steel: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
Acero para muelles: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
Acier à ressort: C 60S (C 60)EN 10132 - 1/4 (DIN 17222)
HARDNESS DURETÉ DUREZA
350 ÷ 425 36 ÷ 43
HV10 HRC
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
112
3
TECHNICAL INFORMATION: MATERIALSINFORMATIONS TECHNIQUES: MATÉRIAUXINFORMACIÓN TÉCNICA: MATERIALES
STAINLESS STEELUpon customer request and for quantities to be established per order, the following types of washers can be supplied:
DIN 6798 ASerrated lock washers external teethDIN 6798 JSerrated lock washers internal teethCan be supplied in:
- STAINLESS STEEL A2 – AISI 304 (W.N. 1.4301)- STAINLESS STEEL A4 – AISI 316 L (W.N. 1.4435 / 1.4404)
Resistance60 - 70 Kg/mm2
A2 AISI 304 STAINLESS STEEL guarantees good corrosion resistance; A4 AISI 316 L STAINLESS STEEL guarantees excellent corrosion resistance and it is a non-magnetic material.
Upon customer request and for quantities to be established per order, the following types of washers can be supplied:
DIN 6797 AExternal toothed washerDIN 6797 JInternal toothed washerCan be supplied in Stainless steelA2 - AISI 304 (W.N. 1.4301).
Resistance60 - 70 Kg/mm2
STANDARD SURFACE TREATMENT- self finished and oiled.Oiled washers have a basic protection against corrosion.
OTHER SURFACE TREATMENTS Toothed washers can be supplied either white or yellow zinc plated, with galvanised surface treatment (ELECTROLYTIC ZINC COATING: minimum resistance 96 hours in salt spray chamber).
A hydrogen embrittlement relief treatment is carried out on the washers at 200°C for at least 18 hours, and within 3 hours after the galvanisation process in order to eliminate any residual fragility due to the electrolytic treatment.
MATERIAL INOXBajo pedido del cliente, y para cantidades que se definirán al momento de establecer el pedido, los siguientes tipos de arandelas:
DIN 6798 AArandelas con dentado externoDIN 6798 JArandelas con dentado internoPueden servirse en:
- Acero INOX A2 - AISI 304 (W.N. 1.4301)- Acero INOX A4 - AISI 316 L (W.N. 1.4435/1.4404)
Resistencia60 - 70 Kg/mm2
El ACERO INOX A2 AISI 304 es un material que garantiza una buena resistencia a la corrosión, el ACERO INOX A4 AISI 316 L garantiza una excelente resistencia a la corrosión y es material no magnético.
Bajo pedido del cliente, y para cantidades que se definirán al momento de establecer el pedido, los siguientes tipos de arandelas:
DIN 6797 AArandelas con dentado externoDIN 6797 JArandelas con dentado internopueden servirse en Acero INOXA2 - AISI 304 (W.N. 1.4301).
Resistencia60 - 70 Kg/mm2
ACABADO SUPERFICIAL ESTÁNDAR- bruñidas y aceitadas.Las arandelas aceitadas tienen una protección de base contra la corrosión.
OTROS ACABADOS SUPERFICIALESLas arandelas dentadas pueden entregarse con galvanizado blanco o amarillo, con tratamiento de galvanizado superficial (REVESTIMIENTO ELECTROLÍTICO DE ZINC: resistencia mínima 96 horas en cámara salina).
Las arandelas han recibido un tratamiento térmico de deshidrogenización a 200°C de una duración mínima de 18 horas, y efectuado obligatoriamente en las 3 horas sucesivas al tratamiento de galvanizado, para así eliminar la fragilidad residual debida al tratamiento electrolítico.
MATÉRIAU INOXSur demande des clients, et pour des quantités qui seront définies lors de la commande, les types de rondelles ci-dessous sont à disposition:
DIN 6798 ARondelles à denture extérieureDIN 6798 JRondelles à denture intérieurePeuvent être fournies en:
- Acier INOX A2 - AISI 304 (W.N. 1.4301)- Acier INOX A4 - AISI 316 L (W.N. 1.4435)
Résistance60 - 70 Kg/mm2
Le matériau ACIER INOX A2 AISI 304 garantit une bonne résistance à la corrosion, l’ACIER INOX A4 AISI 316 L garantit une excellente résistance à la corrosion et est un matériau amagnétique.
Sur demande des clients, et pour des quantités qui seront définies lors de la commande, les types de rondelles ci-dessous sont à disposition:
DIN 6797 ARondelles à denture extérieureDIN 6797 JRondelles à denture intérieurePeuvent être fournies en Acier INOXA2 - AISI 304 (W.N. 1.4301).
Résistance60 - 70 Kg/mm2
FINITION DE SURFACE STANDARD- brunies et huilées.Les rondelles huilées ont une protection de base contre la corrosion.
AUTRES FINITIONS DE SURFACE Les rondelles à denture peuvent être fournies zinguées blanc ou jaune avec une galvanisation de surface (REVÊTEMENT ÉLECTROLYTIQUE AU ZINC: résistance minimale de 96 heures au brouillard salin).
Les rondelles subissent un traitement thermique de dégazage à 200°C pendant au moins 18 heures; ce traitement doit être absolument effectué dans les 3 heures qui suivent la galvanisation afin d’éviter la fragilité résiduelle due au traitement électrolytique.
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
113TECHNICAL INFORMATION: SURFACE TREATMENT AND PACKAGING
INFORMATIONS TECHNIQUES : FINITION DE SURFACE ET EMBALLAGEINFORMACIÓN TÉCNICA: TRATAMIENTO SUPERFICIAL Y EMPAQUETADO
3
Upon request, for quantities to be established per order, washers can be supplied with MECHANICAL GALVANISATION and PHOSPHATE, providing variable resistance in the salt spray chamber according to the thickness of the coating.
NOTEAll thicknesses listed in the following tables refer to washers with self-finished and oiled surface treatment.If the washer undergoes galvanized surface treatments, its thickness might be different according to the μm required by the customer.
Washers are supplied loose in boxes, and are packed in larger cartons for transport.
Upon request and for high quantities washers can be supplied loose in industrial cartons.
Our packaging system is undergoing changes, therefore, it may be subjected to variations with respect to the quantities specified in the technical tables.
METHODOLOGY TO USE FORTHE CONTROL OF THE RESIDUAL FRAGILITY AFTER THE HEAT TREATMENT ORSURFACE TREATMENTIn order to check for any possible residual fragility in the washer due to the absorption of hydrogen during the heat and surface treatments, the following test are carried out on washer:
- n° 1: clumping on plate Proof
Proceed in mounting with the torque indicated in technical tables, after 24 hours proceed in dismontling and checking brittleness.
Bajo pedido, y para cantidades que se establecerán al momento del pedido, pueden servirse acabados superficiales de GALVANIZADO MECÁNICO y FOSFATACIÓN con una resistencia en la cámara salina que varía en función del grosor del revestimiento.
NOTALos grosores indicados en las siguientes tablas se refieren a arandelas con acabado superficial bruñido, aceitado y fosfatado. Si la arandela es sometida a tratamientos de galvanizado superficiales, su grosor puede variar en función de las μm solicitadas por el cliente.
Las arandelas se sirven empaquetadas sueltas en cajas dentro de cajones de cartón para el transporte.
Para pedidos de grandes cantidades, las arandelas pueden empaquetarse sueltas en embalajes industriales.
Nuestro sistema de empaquetado se encuentra en fase de evolución, por lo cual podría sufrir variaciones en lo que se refiere a las cantidades especificadas en las tablas técnicas.
MÉTODO PARA EFECTUAR EL CONTROL DE LA FRAGILIDAD RESIDUAL TRAS EL TRATAMIENTO TÉRMICO O EL TRATAMIENTO SUPERFICIALPara comprobar una posible fragilidad residual en la arandela debida a la absorción de hidrógeno durante los tratamientos térmicos y superficiales, se efectúan las siguientes pruebas en las arandelas:
- 1 prueba de apriete sobre placas
Efectuar el montaje con el par de torsión indicado en cada una de las tablas técnicas, pasadas 24 horas, desmontar y efectuar seguidamente el control de fragilidad.
Sur demande, et pour des quantités qui seront établies lors de la commande, nous pouvons exécuter des traitements de surface spéciaux par ZINGAGE MÉCANIQUE, PHOSPHATATION, qui garantissent une résistance au brouillard salin qui varie en fonction de l’épaisseur de la couche.
REMARQUELes épaisseurs indiquées sur les tableaux suivants sont celles des rondelles huilées et brunies. Si les rondelles subissent un traitement de surface par galvanisation, leur épaisseur peut varier suivant les μm requis par le client.
Les rondelles sont livrées emballées en vrac dans des boîtes, enfermées dans des cartons pour le transport.
Pour de grosses quantités, nous pouvons emballer les rondelles en vrac dans des emballages industriels.
Notre système d’emballage étant en cours d’évolution, il risque de subir des variations quant aux quantités indiquées sur les tableaux techniques.
MÉTHODE DE CONTRÔLEDE LA FRAGILITÉ RÉSIDUELLEÀ LA SUITE DU TRAITEMENT THERMIQUE OU DUTRAITEMENT DE SURFACEAfin de vérifier la présence d’une éventuelle fragilité résiduelle des rondelles, causée par l’absorption d’hydrogène au cours des traitements thermiques et de surface, nous effectuons, sur les rondelles, les tests suivants:
- n.1 test de serrage sur plaques
Effectuer le montage avec le couple de torsion indiqué dans les différents tableaux techniques et, 24 heures plus tard, effectuer le démontage et le contrôle successif de fragilité.
Toothed washerto be testedRondelle à denture à testerArandela dentada a probar
VIS 8.8TORNILLO 8.8
SCREW 8.8
Flat washer used as base of support
Arandela plana utilizada como base
Rondelle plane utilisée comme base.
PACKAGING EMBALLAGE EMPAQUETADO
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
114
3
TECHNICAL INFORMATIONINFORMATIONS TECHNIQUESINFORMACIÓN TÉCNICA
- n° 2: tapered folding test
After placing the washer on a cone whose angle may vary according to the typology of the washer:
Press the washer with the respective testing load.
FRAGILITY CONTROLON THE TOOTHED WASHERAfter the testing, washers must be checked carefully with a microscope and must not show cracks or beginnings of fractures.
- 2 prueba de plegado en cono
Después de apoyar la arandela sobre un cono cuyo ángulo varía en función del tipo de arandela:
Aplastar la arandela con la correspondiente carga de prueba.
CONTROL DE FRAGILIDADEN ARANDELAS DENTADASDespués de las pruebas, las arandelas deben ser revisadas al microscopio y no deben presentar grietas o incipientes roturas.
- n.2 test de pliage sur cône
Après avoir appuyé la rondelle sur un cône, avec un angle qui varie en fonction du type de rondelle:
Écrasez la rondelle avec sa charge test correspondante.
CONTRÔLE DE LA FRAGILITÉSUR DES RONDELLES À DENTURE Après le test, la rondelle doit être examinée au microscope et ne doit présenter ni craquelure, ni début de fracture.
120°
DIN 6798 A and V
DIN 6797 A
Large band externaltoothed washers
DIN 6907
DIN 6798 A et V
DIN 6797 A
Rondelles à denture extérieure et à bande large
DIN 6907
DIN 6798 A y V
DIN 6797 A
Arandelas con dentado externo de franja ancha
DIN 6907
130°
DIN 6798 J
DIN 6797 J
Narrow band internaltoothed washers
DIN 6798 J
DIN 6797 J
Rondelles à denture intérieure et à bande étroite
DIN 6798 J
DIN 6797 J
Arandelas con dentado interno de franja estrecha
160°
Large band internaltoothed washers
Double toothedwashers
Rondelles à denture intérieure et à bande large
Rondelles à doubledenture
Arandelas con dentado interno de franja ancha
Arandelas con dentadodoble
TAPER CÔNE TYPE OF WASHER TYPE DE RONDELLE TIPO DE ARANDELA CONO
TESTING LOADCHARGE TESTCARGA DE PRUEBA
WASHERRONDELLEARANDELA
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
115TECHNICAL INFORMATION
INFORMATIONS TECHNIQUESINFORMACIÓN TÉCNICA
3
TECHNICAL NOTEBENERI® SpA provides washers(ex DIN 6798 A) with overlapped teeth from diameter mm 3 up to diameter mm 16.
External Washers (DIN 6798 A) ensure an optimal and efficient use only when teeth are overlapped and when the clearance between screw and washer is limited thanks to the reduction of the internal diameter of the washer itself.
NOTA TÉCNICABENERI® SpA suministra arandelas (conforme a DIN 6798 A) con dientes superpuestos con diámetros de 3 mm a 16 mm.
Las arandelas con dentado externo (DIN 6798 A) garantizan un uso eficaz y excelente únicamente si los dientes están superpuestos y si se limita al mínimo indispensable el juego entre arandela y tornillo con la reducción del diámetro interno de la arandela misma.
REMARQUE TECHNIQUEL’entreprise BENERI® SpA fournit des rondelles (ex DIN 6798 A) à dents superposées du diamètre de 3 mm au diamètre de 16 mm.
Les rondelles à denture extérieure (DIN 6798 A) garantissent une utilisation efficace et optimale, uniquement si les dents sont superposées et si l’on limite au minimum indispensable le jeu entre rondelle et vis avec la réduction du diamètre interne de la rondelle même.
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
d D s Kg mm. H13 h14
2 2,20 0,140 / 0 4,50 0 / - 0,300 0,30 0,020 / - 0,020 9 0,38 0,025
2,3 2,50 0,140 / 0 5,00 0 / - 0,300 0,40 0,020 / - 0,020 9 0,61 0,042
2,5 2,70 0,140 / 0 5,50 0 / - 0,300 0,40 0,020 / - 0,020 9 0,81 0,052
2,6 2,80 0,140 / 0 5,50 0 / - 0,300 0,40 0,020 / - 0,020 9 0,81 0,048
3 3,20 0,180 / 0 6,00 0 / - 0,300 0,40 0,020 / - 0,020 9 1,40 0,060
3,5 3,70 0,180 / 0 7,00 0 / - 0,360 0,50 0,025 / - 0,025 10 2,17 0,090
4 4,30 0,180 / 0 8,00 0 / - 0,360 0,50 0,025 / - 0,025 11 3,30 0,130
5 5,10 0,180 / 0 9,00 0 / - 0,360 0,50 0,025 / - 0,025 11 6,70 0,150
5 5,30 0,180 / 0 10,00 0 / - 0,360 0,60 0,025 / - 0,025 11 6,70 0,250
6 6,18 0,220 / 0 10,90 0 / - 0,430 0,70 0,030 / - 0,030 12 11,20 0,300
7 7,40 0,220 / 0 12,50 0 / - 0,430 0,80 0,030 / - 0,030 14 18,00 0,473
8 8,20 0,220 / 0 14,00 0 / - 0,430 0,80 0,030 / - 0,030 14 27,00 0,560
8 8,40 0,220 / 0 15,00 0 / - 0,430 0,80 0,030 / - 0,030 14 27,00 0,720
9-3/8" 9,55 0,220 / 0 16,00 0 / - 0,430 0,80 0,030 / - 0,030 14 0,740
10 10,50 0,270 / 0 18,00 0 / - 0,430 0,90 0,030 / - 0,030 16 53,00 1,040
11-7/16" 11,50 0,270 / 0 19,50 0 / - 0,520 0,90 0,030 / - 0,030 16 1,262
12 12,60 0,270 / 0 20,22 0 / - 0,520 1,00 0,030 / - 0,030 16 93,00 1,420
13-1/2" 13,20 0,270 / 0 22,00 0 / - 0,520 1,00 0,030 / - 0,030 16 1,726
14 15,00 0,270 / 0 24,00 0 / - 0,520 1,00 0,030 / - 0,030 18 145,00 2,084
16 16,50 0,270 / 0 26,00 0 / - 0,520 1,20 0,035 / - 0,035 18 230,00 2,700
18 19,00 0,330 / 0 30,00 0 / - 0,520 1,40 0,035 / - 0,035 18 310,00 4,303
20 21,00 0,330 / 0 33,00 0 / - 0,620 1,40 0,035 / - 0,035 18 440,00 5,120
22 23,00 0,330 / 0 36,00 0 / - 0,620 1,50 0,035 / - 0,035 18 600,00 6,450
24 25,00 0,330 / 0 38,00 0 / - 0,620 1,50 0,035 / - 0,035 18 770,00 6,770
26-1" 26,40 0,330 / 0 40,00 0 / - 0,620 1,60 0,045 / - 0,045 18 8,120
27 28,00 0,330 / 0 44,00 0 / - 0,620 1,60 0,045 / - 0,045 20 1130,00 10,400
30 31,00 0,390 / 0 48,00 0 / - 0,620 1,60 0,045 / - 0,045 20 1550,00 12,449
116SERRATED LOCK WASHERS EXTERNAL TEETH TYPE ARONDELLES À DENTURE EXTÉRIEURE TYPE AARANDELAS CON DENTADO EXTERNO TIPO A
Rev
_001 -
05.0
3.2
013
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6798 A
3
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
117SERRATED LOCK WASHERS INTERNAL TEETH TYPE J
RONDELLES À DENTURE INTÉRIEURE TYPE JARANDELAS CON DENTADO INTERNO TIPO J
Rev
_001 -
05.0
3.2
013
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6798 J
3
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
d D s Kg mm. H13 h14
2 2,20 0,140 / 0 4,50 0 / - 0,300 0,30 0,020 / - 0,020 7 0,38 0,026
2,3 2,50 0,140 / 0 5,00 0 / - 0,300 0,40 0,020 / - 0,020 7 0,61 0,043
2,5 2,70 0,140 / 0 5,50 0 / - 0,300 0,40 0,020 / - 0,020 7 0,81 0,051
2,6 2,80 0,140 / 0 5,50 0 / - 0,300 0,40 0,020 / - 0,020 7 0,81 0,050
3 3,20 0,180 / 0 6,00 0 / - 0,300 0,40 0,020 / - 0,020 7 1,40 0,056
3,5 3,70 0,180 / 0 7,00 0 / - 0,360 0,50 0,025 / - 0,025 8 2,17 0,098
4 4,30 0,180 / 0 8,00 0 / - 0,360 0,50 0,025 / - 0,025 8 3,30 0,130
5 5,10 0,180 / 0 9,00 0 / - 0,360 0,50 0,025 / - 0,025 8 6,70 0,150
5 5,30 0,180 / 0 10,00 0 / - 0,360 0,60 0,025 / - 0,025 8 6,70 0,246
6 6,40 0,220 / 0 11,00 0 / - 0,430 0,70 0,030 / - 0,030 9 11,20 0,310
7 7,40 0,220 / 0 12,50 0 / - 0,430 0,80 0,030 / - 0,030 10 18,00 0,430
8 8,20 0,220 / 0 14,00 0 / - 0,430 0,80 0,030 / - 0,030 10 27,00 0,550
8 8,40 0,220 / 0 15,00 0 / - 0,430 0,80 0,030 / - 0,030 10 27,00 0,670
9-3/8" 9,55 0,220 / 0 16,00 0 / - 0,430 0,80 0,030 / - 0,030 10 0,762
10 10,50 0,270 / 0 18,00 0 / - 0,430 0,90 0,030 / - 0,030 12 53,00 1,070
11-7/16" 11,50 0,270 / 0 19,50 0 / - 0,520 0,90 0,030 / - 0,030 12 1,220
12 13,00 0,270 / 0 20,50 0 / - 0,520 1,00 0,030 / - 0,030 12 93,00 1,380
13-1/2" 13,20 0,270 / 0 22,00 0 / - 0,520 1,00 0,030 / - 0,030 12 1,720
14 15,00 0,270 / 0 24,00 0 / - 0,520 1,00 0,030 / - 0,030 14 145,00 1,950
16 17,00 0,270 / 0 26,00 0 / - 0,520 1,20 0,035 / - 0,035 13 230,00 2,620
18 19,00 0,330 / 0 30,00 0 / - 0,520 1,40 0,035 / - 0,035 13 310,00 4,302
20 21,00 0,330 / 0 33,00 0 / - 0,620 1,40 0,035 / - 0,035 15 440,00 5,080
22 23,00 0,330 / 0 36,00 0 / - 0,620 1,50 0,035 / - 0,035 15 600,00 6,450
24 25,00 0,330 / 0 38,00 0 / - 0,620 1,50 0,035 / - 0,035 15 770,00 6,951
26-1" 26,40 0,330 / 0 40,00 0 / - 0,620 1,60 0,045 / - 0,045 15 8,365
27 28,00 0,330 / 0 44,00 0 / - 0,620 1,60 0,045 / - 0,045 16 1130,00 10,319
30 31,00 0,390 / 0 48,00 0 / - 0,620 1,60 0,045 / - 0,045 17 1550,00 12,395
A B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
118COUNTERSUNK TOOTHED WASHERS TYPE VRONDELLES À DENTURE CONIQUE TYPE VARANDELAS CON DENTADO CÓNICO TIPO V
Rev
_000 -
26.0
7.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6798 V
3
d D s Kg mm. H13
3 3,20 0,180 / 0 6,00 0,20 0,015 / - 0,015 12 2500 0,040
3,5 3,70 0,180 / 0 7,00 0,25 0,015 / - 0,015 12 2500 0,074
4 4,30 0,180 / 0 8,00 0,25 0,015 / - 0,015 14 2500 0,100
5 5,30 0,180 / 0 9,80 0,30 0,020 / - 0,020 14 2500 0,142
6 6,40 0,220 / 0 11,80 0,40 0,020 / - 0,020 16 3000 0,273
8 8,40 0,220 / 0 15,30 0,40 0,020 / - 0,020 18 3000 0,430
10 10,50 0,270 / 0 19,00 0,50 0,025 / - 0,025 20 4000 0,870
12 13,00 0,270 / 0 23,00 0,50 0,025 / - 0,025 26 4000 1,292
14 15,00 0,270 / 0 26,20 0,60 0,025 / - 0,025 28 6000 2,110
16 17,00 0,270 / 0 30,20 0,60 0,025 / - 0,025 30 6000 2,740
A B
Number of teethNombre de dentsNº de dientes
A Test load capacity (N)Charge test (N)Carga de prueba (N)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
119SERRATED LOCK WASHERS EXTERNAL TEETH TYPE A
RONDELLES À DENTURE EXTÉRIEURE TYPE AARANDELAS CON DENTADO EXTERNO TIPO A
Rev
_000 -
30.0
7.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6797 A
3
d d D D s Kg mm. min. max max min.
3 3,20 3,38 6,00 5,70 0,40 0,020 / - 0,020 6 1,40 0,039
4 4,30 4,48 8,00 7,64 0,50 0,025 / - 0,025 8 3,30 0,080
5x10 5,30 5,48 10,00 9,64 0,60 0,025 / - 0,025 8 6,70 0,168
6 6,40 6,62 11,00 10,57 0,70 0,030 / - 0,030 8 11,20 0,221
8x15 8,40 8,62 15,00 14,57 0,80 0,030 / - 0,030 8 27,00 0,517
10 10,50 10,77 18,00 17,57 0,90 0,030 / - 0,030 9 53,00 0,800
12 13,00 13,27 20,50 19,98 1,00 0,030 / - 0,030 10 93,00 1,030
14 15,00 15,27 24,00 23,48 1,00 0,030 / - 0,030 10 145,00 1,520
16 17,00 17,27 26,00 25,48 1,20 0,035 / - 0,035 12 230,00 1,920
18 19,00 19,33 30,00 29,48 1,40 0,035 / - 0,035 12 310,00 3,034
20 21,00 21,33 33,00 32,38 1,40 0,035 / - 0,035 12 440,00 3,750
22 23,00 23,33 36,00 35,38 1,50 0,035 / - 0,035 14 600,00 4,776
24 25,00 25,33 38,00 37,38 1,50 0,035 / - 0,035 14 770,00 5,085
27 28,00 28,33 44,00 43,38 1,60 0,045 / - 0,045 14 1130,00 7,687
30 31,00 31,39 48,00 47,38 1,60 0,045 / - 0,045 14 1550,00 9,100
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
120SERRATED LOCK WASHERS INTERNAL TEETH TYPE JRONDELLES À DENTURE INTÉRIEURE TYPE JARANDELAS CON DENTADO INTERNO TIPO J
Rev
_000 -
26.0
7.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6797 J
3
d d D D s Kg mm. min. max max min.
3 3,20 3,38 6,00 5,70 0,40 0,020 / - 0,020 6 1,40 0,040
4 4,30 4,48 8,00 7,64 0,50 0,025 / - 0,025 8 3,30 0,100
5x10 5,30 5,48 10,00 9,64 0,60 0,025 / - 0,025 8 6,70 0,190
6 6,40 6,62 11,00 10,57 0,70 0,030 / - 0,030 8 11,20 0,215
8x15 8,40 8,62 15,00 14,57 0,80 0,030 / - 0,030 8 27,00 0,510
10 10,50 10,77 18,00 17,57 0,90 0,030 / - 0,030 9 53,00 0,770
12 13,00 13,27 20,50 19,98 1,00 0,030 / - 0,030 10 93,00 1,060
14 15,00 15,27 24,00 23,48 1,00 0,030 / - 0,030 10 145,00 1,473
16 17,00 17,27 26,00 25,48 1,20 0,035 / - 0,035 12 230,00 1,950
18 19,00 19,33 30,00 29,48 1,40 0,035 / - 0,035 12 310,00 3,210
20 21,00 21,33 33,00 32,38 1,40 0,035 / - 0,035 12 440,00 3,832
22 23,00 23,33 36,00 35,38 1,50 0,035 / - 0,035 14 600,00 4,980
24 25,00 25,33 38,00 37,38 1,50 0,035 / - 0,035 14 770,00 5,244
27 28,00 28,33 44,00 43,38 1,60 0,045 / - 0,045 14 1130,00 8,087
30 31,00 31,39 48,00 47,38 1,60 0,045 / - 0,045 14 1550,00 9,413
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
121LARGE BAND EXTERNAL TOOTHED WASHERS
RONDELLES À DENTURE EXTÉRIEURE ET À BANDE LARGEARANDELAS CON DENTADO EXTERNO DE FRANJA ANCHA
Rev
_001 -
26.1
1.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
RDEFL
3
d D s Kg mm. H14 h16
3 3,20 0,300 / 0 7,00 0 / - 0,900 0,40 0,020 / - 0,020 10 1,40 0,080
4 4,30 0,300 / 0 9,00 0 / - 0,900 0,50 0,025 / - 0,025 11 3,30 0,188
5 5,30 0,300 / 0 11,00 0 / - 1,100 0,60 0,025 / - 0,025 12 6,70 0,348
6 6,40 0,360 / 0 13,00 0 / - 1,100 0,70 0,030 / - 0,030 13 11,20 0,538
7 7,30 0,360 / 0 14,00 0 / - 1,100 0,70 0,030 / - 0,030 14 18,00 0,579
8 8,40 0,360 / 0 17,00 0 / - 1,100 0,80 0,030 / - 0,030 16 27,00 1,000
10 10,50 0,430 / 0 20,50 0 / - 1,300 1,00 0,030 / - 0,030 16 53,00 1,767
10 10,50 0,430 / 0 26,00 0 / - 1,300 1,20 0,035 / - 0,035 18 53,00 3,976
10 10,50 0,430 / 0 33,00 0 / - 1,600 1,40 0,400 / - 0,040 18 53,00 7,980
12 12,50 0,430 / 0 24,00 0 / - 1,300 1,00 0,030 / - 0,030 18 93,00 2,358
14 14,50 0,430 / 0 26,00 0 / - 1,300 1,20 0,035 / - 0,035 18 145,00 3,177
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
122LARGE BAND INTERNAL TOOTHED WASHERSRONDELLES À DENTURE INTÉRIEURE ET À BANDE LARGEARANDELAS CON DENTADO INTERNO DE FRANJA ANCHA
Rev
_001 -
26.1
1.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
RDIFL
3
d D s Kg mm. H14 h16
3 3,20 0,300 / 0 9,00 0 / - 0,900 0,50 0,025 / - 0,025 7 1,40 0,199
3 3,20 0,300 / 0 12,00 0 / - 1,100 0,50 0,025 / - 0,025 7 1,40 0,402
4 4,30 0,300 / 0 11,00 0 / - 1,100 0,50 0,025 / - 0,025 7 3,30 0,300
4 4,30 0,300 / 0 15,00 0 / - 1,100 0,70 0,030 / - 0,030 7 3,30 0,830
4 4,30 0,300 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 3,30 1,430
5 5,20 0,300 / 0 12,00 0 / - 1,100 0,70 0,030 / - 0,030 7 6,70 0,440
5 5,30 0,300 / 0 14,00 0 / - 1,100 0,70 0,030 / - 0,030 8 6,70 0,691
5 5,30 0,300 / 0 14,00 0 / - 1,100 1,00 0,030 / - 0,030 8 6,70 0,987
5 5,30 0,300 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 6,70 1,397
5 5,50 0,300 / 0 20,00 0 / - 1,300 1,00 0,030 / - 0,030 8 6,70 2,189
6 6,30 0,360 / 0 14,00 0 / - 1,100 0,70 0,030 / - 0,030 8 11,20 0,650
6 6,50 0,360 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 11,20 1,317
6 6,50 0,360 / 0 20,00 0 / - 1,300 1,00 0,030 / - 0,030 8 11,20 2,120
6 6,50 0,360 / 0 22,00 0 / - 1,300 1,00 0,030 / - 0,030 8 11,20 2,602
8 8,50 0,360 / 0 22,00 0 / - 1,300 1,00 0,030 / - 0,030 9 27,00 2,380
8 8,50 0,360 / 0 22,00 0 / - 1,300 1,20 0,035 / - 0,035 8 27,00 2,955
8 8,50 0,360 / 0 26,00 0 / - 1,300 1,00 0,030 / - 0,030 9 27,00 3,491
8 8,30 0,360 / 0 26,00 0 / - 1,300 1,40 0,035 / - 0,035 7 27,00 5,076
8 8,30 0,360 / 0 26,00 0 / - 1,300 1,80 0,045 / - 0,045 6 27,00 6,526
10 10,50 0,430 / 0 22,00 0 / - 1,300 1,00 0,030 / - 0,030 11 53,00 2,172
10 10,50 0,430 / 0 26,00 0 / - 1,300 1,00 0,030 / - 0,030 11 53,00 3,360
10 10,50 0,430 / 0 30,00 0 / - 1,300 1,20 0,035 / - 0,035 11 53,00 5,520
12 12,50 0,430 / 0 30,00 0 / - 1,300 1,20 0,035 / - 0,035 11 93,00 5,410
12 12,50 0,430 / 0 32,00 0 / - 1,600 1,20 0,035 / - 0,035 12 93,00 6,166
13-1/2" 13,20 0,430 / 0 32,00 0 / - 1,600 1,20 0,035 / - 0,035 12 5,910
14 14,50 0,430 / 0 32,00 0 / - 1,600 1,40 0,035 / - 0,035 12 145,00 6,729
14 14,50 0,430 / 0 35,00 0 / - 1,600 1,40 0,035 / - 0,035 12 145,00 8,429
16 16,50 0,430 / 0 35,00 0 / - 1,600 1,40 0,035 / - 0,035 13 230,00 7,923
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
123DOUBLE TOOTHED WASHERS
RONDELLES À DOUBLE DENTUREARANDELAS CON DENTADO DOBLE
Rev
_000 -
30.0
7.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
RDD
3
d D s Kg mm. H14 h16
3 3,20 0,300 / 0 12,00 0 / - 1,100 0,50 0,025 / - 0,025 7 12 1,40 0,376
4 4,30 0,300 / 0 15,00 0 / - 1,100 0,70 0,030 / - 0,030 7 14 3,30 0,872
4 4,30 0,300 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 16 3,30 1,451
5 5,30 0,300 / 0 15,00 0 / - 1,100 0,80 0,030 / - 0,030 7 14 6,70 0,906
5 5,30 0,300 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 16 6,70 1,385
5 5,50 0,300 / 0 20,00 0 / - 1,300 1,00 0,030 / - 0,030 8 16 6,70 2,160
6 6,50 0,360 / 0 18,00 0 / - 1,100 0,80 0,030 / - 0,030 8 16 11,20 1,306
6 6,50 0,360 / 0 20,00 0 / - 1,300 1,00 0,030 / - 0,030 8 16 11,20 2,040
6 6,50 0,360 / 0 22,00 0 / - 1,300 1,00 0,030 / - 0,030 8 16 11,20 2,570
8 8,50 0,360 / 0 22,00 0 / - 1,300 1,00 0,030 / - 0,030 9 16 27,00 2,452
8 8,50 0,360 / 0 26,00 0 / - 1,300 1,00 0,030 / - 0,030 9 18 27,00 3,432
10 10,50 0,430 / 0 26,00 0 / - 1,300 1,00 0,030 / - 0,030 11 18 53,00 3,265
10 10,50 0,430 / 0 30,00 0 / - 1,300 1,20 0,035 / - 0,035 11 18 53,00 5,520
12 12,50 0,430 / 0 30,00 0 / - 1,300 1,20 0,035 / - 0,035 11 18 93,00 5,266
12 12,50 0,430 / 0 32,00 0 / - 1,600 1,20 0,035 / - 0,035 12 20 93,00 6,211
13-1/2" 13,20 0,430 / 0 32,00 0 / - 1,600 1,20 0,035 / - 0,035 12 20 6,020
14 14,50 0,430 / 0 32,00 0 / - 1,600 1,40 0,035 / - 0,035 12 20 145,00 6,550
14 14,50 0,430 / 0 35,00 0 / - 1,600 1,40 0,035 / - 0,035 12 20 145,00 8,387
16 16,50 0,430 / 0 35,00 0 / - 1,600 1,40 0,035 / - 0,035 13 20 230,00 7,400
A Binternal
intérieure / internoexternal
extérieure / externo
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
124TOOTHED WASHERS FOR PRE-ASSEMBLED SCREWSRONDELLES À DENTURE EXTÉRIEURE POUR VIS PRÉ-ASSEMBLÉESARANDELAS CON DENTADO EXTERNO PARA TORNILLOS
Dimensions in mm - Dimensions en mm - Medidas en mm
DIN 6907
3
Rev
_000 -
30.0
7.2
012
d d D h h s Kg mm. min. max h13 min. max
2,5 2,24 2,30 5,50 0 / - 0,180 1,00 1,25 0,40 0,020 / - 0,020 9 0,81 0,058
3 2,70 2,77 6,00 0 / - 0,180 1,00 1,25 0,40 0,020 / - 0,020 9 1,40 0,067
3,5 3,18 3,25 7,00 0 / - 0,220 1,25 1,50 0,50 0,025 / - 0,025 10 2,17 0,108
4 3,59 3,67 8,00 0 / - 0,220 1,25 1,50 0,50 0,025 / - 0,025 11 3,30 0,146
5 4,55 4,64 9,00 0 / - 0,220 1,45 1,70 0,60 0,025 / - 0,025 11 6,70 0,205
6 5,45 5,55 11,00 0 / - 0,270 1,80 2,05 0,70 0,030 / - 0,030 12 11,20 0,359
7 6,45 6,55 12,50 0 / - 0,270 1,80 2,10 0,80 0,030 / - 0,030 14 18,00 0,500
8 7,30 7,45 14,00 0 / - 0,270 2,10 2,40 0,80 0,030 / - 0,030 14 27,00 0,638
10 9,18 9,33 18,00 0 / - 0,270 2,30 2,70 0,90 0,030 / - 0,030 16 53,00 1,221
12 10,98 11,13 20,50 0 / - 0,330 2,60 3,00 1,00 0,030 / - 0,030 16 93,00 1,700
A B
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
NARROW BAND INTERNAL TOOTHED WASHERSRONDELLES À DENTURE INTÉRIEURE ET À BANDE ÉTROITE
ARANDELAS CON DENTADO INTERNO DE FRANJA ESTRECHA
Rev
_001 -
26.1
1.2
012
Dimensions in mm - Dimensions en mm - Medidas en mm
RDIFS
d D s Kg mm. H14 h16
10 10,20 0,250 / 0 14,50 0 / - 0,430 0,50 0,025 / - 0,025 16 53,00 0,295
A B
125
3
Number of teethNombre de dentsNº de dientes
A Load TestTorsion Torque (Nm)Charge test Couple torsion (Nm)Carga de pruebaPar de torsión (Nm)
B
Supplementary dataDonnées complémentairesDatos complementarios
Kg per 1.000 piecesPoids en kg de 1.000 piècesKg por 1.000 piezas
For screws mmPour vis de mmPara tornillos de mm
Washer dimensionsDimensions de la rondelleMedidas de la arandela
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm
BENERI products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 How to order BENERI products: prefix the part number with "R129-"part number example: R129-DIN 471-3
Top Related