SEALS AND MORE
Seals andstamped parts
SPÄH Customer Focus –For your benefit
Within the SPÄH Group of companies,the parent company in Scheer together
with Karl Popp GmbH & Co. in BadBevensen are responsible for operations in thefield of „seals and stamping parts“, which alsoincludes insulating parts, rings, strips, sectionsand other vendor parts. Both companies havearound 400 qualified employees working in
administration, applications engineering consulting,production, quality management and service.Our range of competencies covers the wholefield of seals and stamping parts made fromnon-metallic materials. Our aim is to stay closeto our customers: with high-performance materialsof guaranteed quality, support and service – foryour benefit.
Seals, stamped parts, insu-lating parts, rings and blankssupplied by SPÄH fulfilimportant functions in thefollowing sectors:
3 Plant manufacture
3 Fittings and small apparatus manufacture
3 Drive trains and materials handling
3 Building, quarrying andearth-moving
3 Chemicals
3 Electrical equipment,electronics
3 Vehicle manufacturing
3 Precision engineering
3 Beverages
3 Trading
3 Heating/air-conditioning/ventilation
3 Hydraulics
3 Installation and assembly
3 Motor vehicles
3 Aviation and aerospace
3 Mechanical engineering
3 Medical engineering
3 Food and luxury items
3 Pneumatics
3 Pumps, compressors
3 Refineries
3 Sanitary equipment
3 Transport
3 Environmental technology
3 Traffic
3 The Water industry
3 Subcontracting
This broad spread of expe-rience across many sectorsof industry makes us a flexi-ble, all-round partner in thisfield of operations. Youradvantage.
More than 30 years experience in Applications Engineering – your advantage
cover any size of production run- startingfrom single batches up to runs of severalmillion parts. The multiple of the machiningoperations matches the variety of the mate-rials used. The result is precision work at aneconomic price. Our well-organised semi-finished parts stores in Scheer and BadBevensen make an important contribution tothe just-in-time delivery. Your profitability.
Just-in-time – your profitability
SPÄH’s tool manufacturing- the basisfor precision, performance and econo-mic operations. Depending on the material,the number of pieces and the type, wemanufacture using the appropriate tooling:compound dies, keen-edged cutters, shear cutters, or steel strip cutters. A large stock ofstandard tools keeps tooling costs down to aminimum.
Whether it is for samples, small productionor mass production – just-in-time is a standardprocedure for us. We are extremely flexiblebecause we can offer everything from thesame source in consultancy, design, toolmanufacture, production and service. With
our efficient manufactu-ring systems, we
We are highly proficient in a multi-tude of making-up and processingoperations within the broad spec-trum of non-metallic materials, forexample using: We work on request with many other
materials such as sandwich and compoundmaterials as well as graphite. Equally,whatever the material is that you want to utilise, we will process it safely and to the specified level of accuracy. Your assurance.
Centellen CREPDMEWP Faserflex
Fibre Felt UNITEC®
Chipboard Rubberised cork Fabric laminate Paper base laminate Resin board Hostaphan Inducon
KlingersilOpen cellsponge rubberNBRNobestNovapress Nylatron POM Polyamide Polycarbonate Polyethylene
PolypropylenePolystyrene PolyurethaneCompositioncork Glazed insulating pressboard PTFE PVC SBR
Our materials experience – your assurance
We supply seals and stamped parts inany shape including high precisiondesign with filigree contours and highlycomplex forms. In terms of dimensions,we can supply you with the completerange from 1 up to 10,000 millimetres.To complete the range, there are insula-ting parts, rings (from approx. 2 metres
these are glued together in segments),strips and sections. With a view to accu-racy and contour precision, we work inthe micrometer range.
In production, depending on the material,shape, dimension and precision of theseal or of the stamped part, we utilise
the following processes: hand finishingof the parts, stamping, die-cutting,water-jet cutting. All of the productionprocesses are subject to continuous qua-lity management procedures as per DINEN ISO 9001:2000, supplemented byinspection methods as specified by theclient. It is here that our basic principleof „Quality is Partnership“ is applied.Your added value.
The character as the sum of the properties ofa material is the deciding factor for its capa-bilities and performance. When recommen-ding materials we pay attention to propertiessuch as:
3 Mechanical stress(Abrasion, impact, wear, etc.)
3 Chemical resistance (oil, petrol, acids,alkaline solution, ozone, etc.)
3 Resistance to environmental influences(cold, heat, damp, dust, etc.)
3 Electrical resistance (Volume resistance) /Dielectric strength
3 Flammability, burning behaviour, melting point
3 Pressure resistance
3 Identification, marking, coloration
3 Compoundability(Metal/textile layers)
3 Complying with relevant regulations suchas: BAM, DVGW, HTB, KTW, WRC
3 Recycling capability
In special cases, we can supply materials foryou as per the profile that you specify.Your potential.
Materials having a certain character perform better – your potential
Abil ABS AFMArmstrong Butyl
SiliconeFoamed materialVulkollan®
Seals, stamped parts, insulating parts from 1 to 10,000 millimetres – your added value
Seals Stamped parts Insulating parts
Closed cellsponge rubber etc.
Subj
ect
to a
ltera
tion
s •
Pri
nted
in G
erm
any
• 03
1002
LM
2.1
• ©
Neu
bert
Wer
bung
BL
www.spaeh.de
We supply all seals and stamped parts as per your wishes cut to size for yourfurther processing, for example:
3 Semi-finished products cut to size
3 Identification for pressure or embossing
3 Packaging materials as required
3 Numbering in packaging as required
3 Supplied bundled or stacked
3 In the mounting rack
3 With self adhesive on one or bothsides to assist assembly, with papercarrier quality as per customer specification
3 With the SPÄH „KissCut“ service foraccurate positioning on the conveyorusing strips or rollers for improvedhandling.
With this comprehensive service offerthat matches customer needs, we providean important support for your manu-facturing processes. We pay attention toyour special needs and are always atyour disposal, which is as it should be in a good partnership arrangement.
SPÄH’s further operational areas within„Seals and more“ are in:
There are special information write-upsavailable for each ofthese operational areas.Further informationavailable on request.
The SPÄH service – the bridge to partnership
Semifinished product
ran
ge
Turning and milling
part
s
C
ast and mouldedpar
ts
Special parts sealing
tech
no
log
y
W
ater jet cut parts
Karl Späh GmbH & Co. KGIndustriestraße 8 – 12, D-72516 Scheer
Telefon: +49 (0) 75 72/6 02-0Telefax: +49 (0) 75 72/6 02-16 7E-Mail: [email protected]
2 0700-DICHTUNG
Karl Popp GmbH & Co. KGEppenser Weg 9, D-29549 Bad Bevensen
Telefon: +49 (0) 58 21/98 02-0Telefax: +49 (0) 58 21/98 02-74/75/76E-Mail: [email protected]
SEALS AND MORE
Top Related