LMCChapter B: Threaded couplings
SCREW H
OSE CO
UPLIN
GS RM
GB.1.
B.1.11
W W W . L M C - C O U P L I N G S . C O MSCREW HOSE COUPLINGS RMG
According to EN 14420-5 Male threaded G EN ISO 228-1
Serrated hose shank + collar Brass CW 614N
WP 25 bar ND 15 - ND 100
RMG series Combine the best advantages of two couplings and you get a screw hose coupling that can be assembled with EN 14420-3 safety clamps, FLEXOLINE safety clamps, swage ferrules or band clamps. The hose shank of the male threaded RMG-couplings is slightly serrated and provided with a collar according to EN 14420-2.
Screw hose couplings RMG
LMC-Couplings nv - Z.5 Mollem 192 - 1730 Asse Belgium | Tel +32 2 453 10 87 - Fax +32 2 452 98 78 | [email protected] | www.lmc-couplings.com
+ +
EN 14420-3 and FLEXOLINE safety clamps
HRRK and HRRL swage ferrules
Band & worm drive clamps
RMG screw hose couplings
Standard EN 14420-5
Male thread Flat sealing G EN ISO 228-1
Dimension ND 15 - ND 100
Assembly EN 14420-3 safety clamps FLEXOLINE safety clamps HRRK and HRRL swage ferrules Band & worm drive clamps
Finishing Inner and outer surface machined Hexagon wrench surface
WP PN 25
Material Brass CW 614N
ND For hose Thread Reference
15 13 mm G 1/2 RMG013
20 19 mm G 3/4 RMG019
25 25 mm G 1 RMG025
32 32 mm G 1.1/4 RMG032
40 38 mm G 1.1/2 RMG038
50 50 mm G 2 RMG050
65 63 mm G 2.1/2 RMG063
80 75 mm G 3 RMG075
100 100 mm G 4 RMG100
OD Ø
14 mm
20 mm
26 mm
33 mm
39 mm
51 mm
65 mm
76,1 mm
101,6 mm
Stainless steel and other thread types on request available. [email protected]
RMG.indd 1 28/10/14 15:12lmc2017-indesign.indd 169 9/08/17 16:17
Top Related