365
Activation & Safety Sensors Optex
888Automatic Drive Units & Sliding Door Retro-fit Kits
Slide Drives Sliding Door Retro-fit KitsSwing Drives
Entrematic Ditec DAS-107 Plus 366
Micomdoor SLIM 75 368
Geze ECdrive 370
dormakaba ES 200 Standard/ EASYplus
372
Entrematic Ditec DAB-105 Ditec DAB-205
374376
Gilgen FD20 378
dormakaba ED 100/250
380
Geze TSA 160 NT EMD-F
382384
Record DFA 127 386
Dorma 389
FAAC 390
Label 391
Record 392
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
366
Activation & Safety Sensors Optex
8
Automatic Drive Units Entrematic
88888
Entrematic – Ditec DAS 107 Plus Automatic Sliding Door Drive Unit
Performance
• The DAS 107 complies with all relevant European standards and the safety requirements of BS EN 16005.
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open.
• Battery back up to ensure opening on power failure
• Optional battery for continued operation on power failure
• Tested up to 1 Million cycles
• Plug & Play connectors and Automatic self-learning for quick set up
• Reinforced techno-polymer wheels in DUPONT™ Delrin® for smooth operation and long life
• Long-lasting automation with 24 V DC DUNKERMOTOREN™ with built-in Encoder
Ditec DAS107 PLUS is the new competitive solution incorporating Entrematic’s world renowned high quality and expertise.
A sliding door operator able to satisfy all requirements in commercial environments with door weights up to 160kg.
Designed to be easy and fast to install, Ditec DAS107 PLUS is the perfect choice for professionals in door automation who look for value and ease of maintenance.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Technical Specification
Description Automation for sliding doors
Drive Type Electromechanical Unit
Gearmotor 24 V DC with encoder
Power Supply 100 V - 240 V 50/60 Hz
Max Nominal Power 75 W
Auxiliary Power 0.64 A @ 24 V DC
Operating Temperature -20oC / +50oC
Protection Rating IP20
Dimensions (H x D x L) 120 x 140 x L mm
Max Operator Length 5600 mm
Max Door Panel Weight 120kg Single slide, 2 X 80kg
Opening and Closing Speed 1.0 m/s bi-part door
Hold Open Time 0-60 s (adjustable)
367
Activation & Safety Sensors Optex
888
Automatic Drive Units Entrematic
Compact and Robust Design
Drive Components
Ditec DAS 107 Plus Automatic Sliding Door Drive Unit
ĞƐŝŐŶĞĚĨŽƌĂƐŝŵƉůĞĂŶĚĞĸĐŝĞŶƚŝŶƐƚĂůůĂƟŽŶĨĞǁĐŽŵƉŽŶĞŶƚƐƚŽĂƐƐĞŵďůĞĂŶĚĨĞǁƐƚĞƉƐƚŽƐĞƚͲƵƉŝƚĞĐ^ϭϬϳW>h^ŝƐƚŚĞƟŵĞƐĂǀŝŶŐƐŽůƵƟŽŶ ƵƚŽŵĂƟĐƐĞůĨͲůĞĂƌŶŝŶŐƐƚĂƌƚͲƵƉŵŽĚĞǁŝƚŚĂƵƚŽĚĞƚĞĐƟŽŶŽĨŽŽƌůĞĂĨǁĞŝŐŚƚƐƉĂƐƐĂŐĞŽƉĞŶŝŶŐǁŝĚƚŚƉƌĞƐĞŶĐĞŽĨůŽĐŬŝŶŐĚĞǀŝĐĞĂŶĚƚLJƉĞ;ĨĂŝůƐĂĨĞĨĂŝůƐĞĐƵƌĞͿĂŶĚĞŵĞƌŐĞŶĐLJďĂƩĞƌŝĞƐ
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
120
143
+/- 19
3530
3419
Wide range switching power supply 100 V ÷ 240 V; 50/60 Hz
Key program selector ǁŝƚŚϱŽƉĞƌĂƟŶŐŵŽĚĞƐ
Easy and accurate ƐĞƫŶŐǁŝƚŚϮĚŝŐŝƚĚŝƐƉůĂLJ
Trolley with wheels in DupontTM Delrin® technopolymer and ĂŶƟͲĚĞƌĂŝůŝŶŐƐLJƐƚĞŵ
DUNKERMOTORENTM
gearmotor with ďƵŝůƚͲŝŶĞŶĐŽĚĞƌ
Emergency or ďĂĐŬͲƵƉďĂƩĞƌLJ;ŽƉƟŽŶĂůͿ
Anodized aluminium track
Plug & Play connectors
5012
+/-8
368
Activation & Safety Sensors Optex
8
Automatic Drive Units Micomdoor
88888
Micomdoor Slim 75Automatic Sliding Door Drive Unit
Performance
• The Slim-75 complies with all relevant European standards and the safety requirements of BS EN 16005
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open
• Battery back up to ensure opening on power failure (adjustable closing is also an option)
• Optional electric lock which can be interfaced with an access control system
• 100mm high drive unit height for optimum aesthetics
• System for monitoring tested safety sensors
• No external programming required
• Entrance Only or Exit Only option with type ‘B’ selector
The Slim-75 sliding door drive gives smooth and effective door operation from a compact 100mm high unit. The brushless DC motor ensure long term reliability and increased speed variations. The flexible design allows 1, 2 and 4 leaf configurations with one common drive system, whilst complying with the requirements of BS EN 16005.
The drive unit is self-learning so set up is easy and efficient whilst ensuring peak performance and optimum settings which improve the life of the system. All adjustments are done without the need of a service tool or additional components.
Technical Specification
Power Supply 230V AC
Capacity Rating 200W
Height 100mm
Depth 184mm
Leaf Weight (Max) 1-leaf 160 kg / 2 leaf 110 kg
Opening Width 1 Leaf 3000mm
Opening Width 2 Leaf 3000mm
Ambient Operating Temperature -20 to +50 °C
Protection Level IP20
Opening Speed Max 70 - 820 mm/s
Closing Speed Max 70 - 450 mm/s
Hold Open Time 0 - 60 s
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
369
Activation & Safety Sensors Optex
888
Automatic Drive Units Micomdoor
Compact Design
Drive Components
Micomdoor Slim 75 Automatic Sliding Door Drive Unit
1 2 3 4 5 6 7
1 - Motor- reducer
2 - EMICON Card
3 - Microprocessor controller
4 - Lock
5 - Carriage
6 - Stop
7 - Return wheel
The operator MICOMDOOR® SLIM-75 with a modern and elegant design, has a very quiet operation combining softness and robustness. Providing high power at any speed, it is controlled by the new electronics, equipped with redundant monitoring systems on all the components of the drive, guaranteeing a level of safety according to the new requirements established by the norm EN 16005 Level D for emergency exit, without the need for expensive doors with break-out anti-panic system.
Its Brushless three-phase 24 VDC motor accelerates very fast up to 820 mm / s. Controlled by its 16-bit microprocessor, it automatically adjusts all necessary parameters, providing maximum efficiency and precision in its movement. In addition, it allows to modify its configuration in a simple and fast way adapting its functionality to the different needs. The wheels are made of a special resin that transmits a low sound level for a long life, avoiding the high noise level produced by other materials ageing and wear.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
100
183.9
370
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
GEZE- ECdriveAutomatic Sliding Door Drive Unit
Performance
• High performance with up to 120 kg door weight
• Reliable operator: strong components and low noise level
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Suitable for single or double leaf configuration
• Self-cleaning track and carriers
• Automatic adaptation to traffic flow
The linear sliding door system GEZE ECdrive offers numerous convincing benefits at an excellent cost/performance ratio.
The ECdrive covers door leaf weights of up to 120 kg, is uncompromisingly reliable and suitable for doors in high traffic areas. Quality materials and the latest control technology guarantee efficient and smooth operation. Servicing costs are considerably reduced thanks to the self-cleaning roller carriage. The rounded hood in the elegant GEZE design gives the system an attractive appearance.
Technical Specification
Power Supply 230 V AC / 50-60 Hz
Capacity Rating 150W
Height 120 / 150 mm
Depth 175 mm
Leaf Weight (max.) 1-leaf 120 kg / 2-leaf 120 kg
Opening Width 1-Leaf 700 to 3000 mm
Opening Width 2-Leaf 900 to 3000 mm
Operating Temperature -15 to +50 °C
Enclosure Rating IP 20
Opening Speed (max.) 0.8 m/s
Closing Speed (max.) 0.8 m/s
Hold-Open Time 0 to 60 S
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
371
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
12
3
45 6
GEZE- ECdrive Automatic Sliding Door Drive Unit
• Automatic reversal when an obstacle is detected
• Pharmacy opening
• Lock function
• Vestibule/interlock function
• Automatic opening in the event of a power failure
• Automatic closing in the event of a power failure
• Optional bus interface
• Adjustable opening and closing force (max.) 150N
• Connection for fire alarm system
• Power supply for peripherals
• Door leaf adjustment vertical 10 mm
• Door leaf adjustment horizontal 15 mm
• Anti-tilt protection fitted as standard
Features & Benefits
Version with 120 mm hood and floor guide for floor mounting DH = Passage height.
DH
150
7
30
175
60 23
Version with 150 mm hood and continuousfloor guide DH = Passage height
175
DH
120
7
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
7
30
2360
1 - Transformer2 - Locking3 - Roller carriage
4 - Control5 - Battery6 - Motor
372
Activation & Safety Sensors Optex
888
Automatic Drive Units dormakaba
dormakaba – ES 200 Standard/Easy PlusAutomatic Sliding Door Drive Unit
Performance
• The ES 200 complies with all relevant European standards and the safety requirements of BS EN 16005.
• With DORMA PowerDrive: Dynamic driving phase control for particularly powerful operation with emergency power backup.
• Up to 5 different program switch functions: Off, Automatic, Exit Only, Partial Open, Permanent Open.
• Monitored battery back-up system for use on emergency escape routes.
• Sound-damping with replaceable track rail.
• Tested to 1,000,000 cycles.
• Slimline Contur 100mm operator height (option for 150mm).
The ES 200 STANDARD and ES 200 EASYplus are equipped with DORMA PowerDrive technology with identical mechanical components (specify Easyplus or Standard when specifying or ordering). With an extra powerful motor and dynamic driving phase control, the integrated PowerDrive system ensures safe and reliable operation. All basic parameters are easy to adjust using the integrated pushbuttons and display. No separate programming tools are necessary.
The ES 200 STANDARD is tested and approved for door systems of up to 2 x 160 kg / 1 x 200 kg and the ES 200 EASYplus is tested and approved for door systems of up to 2 x 120 kg / 1 x 200 kg. The ES 200 comes preinstalled with the BS EN 16005 module for self-monitored protection of the secondary closing edges, allowing you to dispense with safety screens where appropriate and connect side screen safety sensors.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Technical Specification
EASYplus Standard
Power Supply 230v AC 230v AC
Capacity Rating 250W 250W
Height 100/150mm 100/150mm
Depth 180mm 180mm
Leaf Weight (Max) 1x200/2x120kg 1x200/2x160kg
Opening Width 1 Leaf 700 - 3000mm 700 - 3000mm
Opening Width 2 Leaf 800 - 3000mm 800 - 3000mm
Ambient Operating Temperature –20 to +60 °C –20 to +60 °C
Protection Level IP20 IP20
Opening Speed Max 10- 55cm/Sec 10- 70cm/Sec
Closing Speed Max 10- 50cm/Sec 10- 50cm/Sec
Hold Open Time 0 - 60 s 0 - 180 s
373
Activation & Safety Sensors Optex
888
Automatic Drive Units dormakaba
The heart of the ES 200 EASYplusThe prefabricated MiniDriveUnit with all the electrical components necessary is industrially tested and facilitates the assembly and maintenance of drive units. The control unit has proven its worth a thousand times in all imaginable fields of
application throughout the world.The MiniDriveUnit of the ES 200 EASYplus is equipped with the DIN 18650 / EN 16005 module as standard.
MiniDriveUnit (MDU)Components
1 MiniDriveUnit
2 Transformer
3 Motor
4 Decoder
5 Basic module (BM)
6 EN 16005- / DIN 18650-Modul
7 Run and installation profile
8 Battery pack (optional)
9 Carriage
10 Deflection roller
11 Service cover holder
12 End stopper
13 Door suspension withadjustment device
14 Belt connection
15 Riemenspannvorrichtung
1413
13
1
13
12
8
9
10
11
13
7
15
53
17 47
180
150
with FLEX
dormakaba – ES 200 Standard/Easy Plus Automatic Sliding Door Drive Unit
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
56 4 3 2
50 180
111
100
47
20
374
Activation & Safety Sensors Optex
888
Automatic Drive Units Entrematic
Entrematic – Ditec DAB-105 Automatic swing door drive unit
Performance
• High performance with up to 200 kg door weight using a push arm and 900mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Very low noise level
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Easy program selection to expand functions
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Power assisted operation all included within the standard unit
Technical Specification
Max Door Weights
200 kg x 0.8 m (Push Arm)
150 kg x 0.8 m (Pull Arm)
Power Supply 100 - 240 V AC / 50-60 Hz
Power Input 0.5 A
Opening Time 3 - 6 s/(0-80°)
Closing Time 3 - 6 s/(90°-10°)
Operating Temperature
-20°C / +55°C (-10°C / +50°C with batteries)
Protection Level IP20
Dimensions mm (H x D x L) 111 x 131 x 720
The powerful, low noise operation and modern look makes the DAB-105 the ideal automation system for swing doors in commercial and public buildings, ensuring safe and reliable management of door movement in every situation. Multiple modes of operation including Fully Automatic and Low Energy are configurable and a spring return action ensures that the DAB-105 will close even after mains power failure.
Basic connections for safety sensors, activation devices and mains power supply are all that is required to have the DAB-105 up and running. Simplicity of installation is key to the DAB-105 operator’s success contributing to keeping it at the top of its class in the global market.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
375
Activation & Safety Sensors Optex
888
Automatic Drive Units Entrematic
Entrematic – Ditec DAB-105 Automatic swing door drive unit
DAB-805 PSA Push Arm DAB-805 PLA Pull Slide Arm
DAB-805 PSA DAB-805PSAF (Fire tested) Arm with articulated motion. (300mm lintel depth).
DAB-805 PLAT Arm with three-sections articulated motion for doors that open inward; automation seen from the inside. (185mm lintel depth).
90°
210
21030
15
90
~90°
230
min 700
max
120
210
TALP508BAD - snoitces eerht ni detalucitrA FASP– ASP508BAD - detalucitrA Sliding - DAB805PLA
90°
25Nm
+/-
210
I
I I
I
I I I
I
I I II
I
21030
15
90
~90°
230
min 700m
ax12
0
210
TALP508BAD - snoitces eerht ni detalucitrA FASP– ASP508BAD - detalucitrA Sliding - DAB805PLA
90°
25Nm
+/-
210
I
I I
I
I I I
I
I I II
I
21030
15
90
~90°
230
min 700
max
120
210
TALP508BAD - snoitces eerht ni detalucitrA FASP– ASP508BAD - detalucitrA Sliding - DAB805PLA
Drive arm options
300max
~400
107
X
Spindle Extension X
DAB-805 PSA (Std.) 30
DAB-805 SE2 (20mm) 50
DAB-805 SE5 (50mm) 80
DAB-805 SE7 (70mm) 100
Spindle Extension X
DAB-805 PLA (Std.) 50
DAB-805 SE2 (20mm) 70
DAB-805 SE5 (50mm) 100
DAB-805 SE7 (70mm) 120
30
107
X
DAB-805 PLA DAB-805PLAB (Panic breakout option)Arm with sliding motion.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
210
30
15
210
210
max
12
0
min 700
230
90
90°
~90°
376
Activation & Safety Sensors Optex
888
Automatic Drive Units Entrematic
Entrematic – Ditec DAB-205 Automatic swing door drive unit
Performance
• High performance with up to 400 kg door weight using a push arm and 900mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Easy program selection to expand functions
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Power assisted operation all included within the standard unit
Technical Specification
Max Door Weights
400 kg x 1.1 m (Push Arm)
300 kg x 0.9 m (Pull Arm)
Power Supply 100 - 240 V AC / 50-60 Hz
Power Input 1.0 A
Opening Time 2.5 - 12 s/(0-80°)
Closing Time 4 - 12 s/(90°-10°)
Operating Temperature
-20°C / +45°C (-10°C / +50°C with batteries)
Protection Level IP20
Dimensions mm (H x D x L) 111 x 131 x 720
The DAB-205 is a high performing and powerful swing-door operator capable of moving doors up to 400KG. The exceptional features of the unit mean that this product can be fitted in demanding applications such as commercial and public environments, including hospitals and airports, applications with high traffic flows.
Basic connections for safety sensors, activation devices and mains power supply are all that is required to have the DAB-205 up and running. Simplicity of installation is key to the DAB-205 operator’s success contributing to keeping it at the top of its class in the global market.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
377
Activation & Safety Sensors Optex
888
Automatic Drive Units Entrematic
Entrematic – Ditec DAB-205 Automatic swing door drive unit
DAB-805 PSA2 Push Arm DAB-805 PLA2 Pull Slide Arm
DAB-805 PSA2Arm with articulated motion. (Fire tested). (up to 362mm lintel depth with extensions added).
OPENINGSpindle Extension X
DAB-805 PSA2 (Std.) 48
DAB-805 SE22 (20mm) 68
DAB-805 SE52 (50mm) 98
DAB-805 SE72 (70mm) 118
Arm Extension Y
Standard Arm 0 - 99
DAB-805 TFL 99 - 230
DAB-805 TFSDAB-805 TKJ 230 - 362
Spindle Extension X
DAB-805 PLA2 (Std.) 46
DAB-805 SE22 (20mm) 67
DAB-805 SE52 (50mm) 95
DAB-805 SE72 (70mm) 116
DAB-805 PLA2Arm with sliding motion. (130mm lintel depth).
Y
107
X
107
X0÷130
210
90°
min 700
210
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
210
210
90°
min 700
Drive arm options
378
Activation & Safety Sensors Optex
888
Automatic Drive Units Gilgen
Gilgen – FD20 Automatic Swing Door Drive Unit
Performance
• High performance with up to 250 kg door weight using a push arm and 1600mm door leaf configuration
• Reliable operator: strong components and real time self monitoring of the operator status
• Safety and quality guaranteed by compliance with most European standards, including BS EN 16005.
• Door interlock feature built into the control board as standard
• Inverse operation of the doors can be set as standard (power close, spring open)
• Tested to 1,000,000 cycles
• Suitable for fire doors
Convenient & Flexible
• Easy to install, to set, and to maintain: available PUSH or PULL configurations
• Operator suitable for left & right hand applications
• Fully Automatic, Low Energy and Push and Go operation all included within the standard unit
The FD20 is a compact and light weight electro mechanical swing door drive unit providing quiet and smooth door operation. Characterised by advanced technology and functionality.
An integrated, user friendly joystick and LC display are used to quickly set relevant parameters (opening, closing time, safety monitoring etc). No additional external devices are required. Illuminated program selector keys and master switch are integrated into the side cover for intuitive operation. With exceptional strength, the robust FD20 is capable of reliably opening and closing doors even if exposed to wind speeds of up to 80 km/h (320Pa). In these particularly arduous conditions a reinforced closure (forced engagement of lock) can be activated to ensure the door closes against the strong winds.
Ingress protection rating of IP20 make the FD20 suitable for mounting internally in a wide variety of commercial and public sector applications. Electric locks/locking mechanism are directly connected to the control unit.
Technical Specification
Max Door Weights 250kg
Max Leaf Width 1600mm
Power Supply 230 AC
Power Consumption 560w Max
Max Opening / Closing Speed 40° /s
Power Supply for Accessories 24V DC 2A
Operating Temperature -15 to +50°c
Protection Level IP20
Dimensions mm (H x D x L) 95 x 120 x 690mm
Closing Force Adjustable EN3 – EN7
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
379
Activation & Safety Sensors Optex
888
Automatic Drive Units Gilgen
Gilgen – FD20 Automatic Swing Door Drive Unit
Push ArmsLintel mounting with standard rod pushing function. (0 - 250mm lintel depth).
Pull Slide Arm Lintel mounting with sliding rod pulling or pushing function. (+ 150 / - 30mm lintel depth).
Push Slide ArmLintel mounting with sliding rod pushing function. (+ 150 / - 30mm lintel depth).
Lintel depth
689
125
689
6890-250
~398
60
100280
60
120
45
7595 17
0
(96-
107)
62026
620
280
280
60
60
120
120
min
. 7
+150/-30
+150/-30
110
95
9526
107
185
90
164
142
(137
-159
)
Dimensions mm
Dimensions mm
Dimensions mm
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
380
Activation & Safety Sensors Optex
888
Automatic Drive Units dormakaba
dormakaba – ED 100 / ED 250 Automatic Swing Door Operators
Performance• Elegant visual
appearance: DORMA Contur design provides an operator height of only 70mm.
• Low noise levels through multi–stage gearing.
• Efficient closing due to an electronic latching action enabling the motor to support the spring to overcome door seals, room to room pressure differentials and wind loads.
• Suitable for 60 minute fire rated doors for both push and pull application.
• The ED 100A / ED 250A along with all DORMA swing door operators provides sufficient force reserves.
Even when the system is used to the maximum the operator will always try to open and close the door perfectly within the statutory limits. DORMA swing door operators contribute to avoiding the loss of heat thereby contributing towards reducing a building’s carbon footprint.
• The ED 100A / ED 250A mainly closes via spring force. However, thanks to its direct drive, the motor automatically switches on to provide support when required. This assists the door to reach its closed position minimising energy loss.
The ED 100 and ED 250 is supplied with two distinct versions of operation, low energy operation and fully automatic operation. The low energy function is built into the standard unit however to achieve fully automatic parameters an additional function board must be added.
The ED 100 / ED 250 operators have an identical contemporary, unobtrusive design which is impressively small allowing them to blend in with the most architecturally sensitive environments. Features such as the ESM Energy Saving Mode function and Wind Load Control contribute towards reducing a building ‘s carbon footprint Both operators may be installed as push-version with standard arm or as pull-version with slide channel.
The ED 100 is suitable for doors with a weight of up to 100kg and a door width of up to 1,100 mm, the ED 250 is designed for doors with a width of up to 1,600 mm and a door weight of up to 250 kg.
Technical Specification
ED100 ED250
Max Door Weights 100KG 250KG
Max Leaf Width 1100mm 1600mm
Power Supply 230v AC 230v AC
Power Consumption 120W 240W
Max opening/ closing speed LE 27deg/sec 27deg/sec
Max opening/ Closing Speed A 50deg/sec 60deg/sec
Power Supply for Accessories 24V DC 1.5A 24V DC 1.5A
Ambient Operating temperature –15 to +50 °C –15 to +50 °C
Protection Level IP20 IP20
Dimensions mm (W x H x D) 685 x 70 x 130 685 x 70 x 130
Closing Force EN 2 - 4, Adjustable
EN 4 - 6, Adjustable
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
381
Activation & Safety Sensors Optex
888
Automatic Drive Units dormakaba
dormakaba – ED 100 / ED 250 Automatic swing door operators
Lintel Depth for slide channel +/- 30mmLintel Depth for standard arm 0 - 500mmDrive arm spindle extensions 30/60/90mm
1500
B min. 1450
15
60
15
19
3145
1470
130
Standard axle extension
Standard axle extension
150
2455 0
15 685
6
1945
33
14
70
View: BASIC Cover, Push Version
View: CONTINUOUS Cover, Pull Version, 12.5mm Drive Arm Pin
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
15 685 130
70 144519
33
44.5
76
1502455 0
15 15
3684
60
150
B min. 1450
150
130
3145 70
1412
3561
23
382
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
GEZE TSA 160 NT Automatic Swing Door Drive Unit
Performance
• BS EN 16005 compliant
• Integrated 3 position program switch on end cap
• Standard: Push & Go function can be activated and deactivated as required
• Low maintenance requirements, high reliability and simple to adjust
• Fire version available
• Centre profile available for pairs of door applications
• Programme switch for the functions : - Off - Automatic - Permanently open
• Inverse version available
• Available in an EN7 version for doors up to 1600mm wide and 310KG
Technical Specification
Max Door Weights 250kg up to 1000mm wide leaf
Max Leaf Width 1400mm 100kg leaf
Power Supply 230v AC
Power Consumption 300W
Max Opening Speed Adjustable
Max Closing Speed Adjustable
Power Supply or Accessories 24V DC 1.2A
Ambient Operating Temperature -50 - +60 °C
Protection Level IP20
Dimensions mm (W x H x D)
690 x 100 x 120mm (Mounting plate +6mm depth)
Closing Force EN 3 – 6, adjustable
Hold Open Time 0 - 60 s
The GEZE TSA 160 NT is an electrohydraulic door drive suitable for the most demanding applications such as shopping centres and sports facilities. It incorporates an electromagnetic hold-open device, with adjustable spring force size EN 3-6.
Opening and closing speeds as well as damping can be adjusted with, hold-open time adjustable from 0 - 60 seconds. Fails close on power failure with 160 NT-F version suitable for fire and smoke doors.
(OPTIONAL)
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
383
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
Transom installation with link arm on the opposite hinge side, single-leaf
X = Door width (mm)Y = Door weight (kg)1 = Link arm2 = Roller guide rail
EN3 - Max 950 leafEN4 - Max 1100 leafEN5 - Max 1250 leafEN6 - Max 1400 leaf(EN 1154)
Link Arm Options
Reveal Depths 0 - 100mm100 - 200mm200 - 350mm
Optional Spindle Extentions24mm 30mm45mm
Transom installation with roller guide rail on the hinge side, single-leaf
Areas of application
GEZE TSA 160 NT Automatic Swing Door Drive Unit
1
2
Y
X
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
121 8*
29*
29*
41*
39
27+X
22*
100 54
440
85
8* 121
119
80
31
31
6354
5042
29*
29*
29*
22*
700
350
310300
250
200
150
100
501100 1500800 1200 1600900 1300 17001000 1400
384
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
GEZE EMD-F Swing Door Drive Unit
Performance
• Slim 7cm high appearance
• Low energy feature
• Meets the requirements of BS EN 16005
• Low wear, maintenance free high performance motor for reliable operation
• 240V DC 1200mA supply for extended accessories
• Servo assist feature
• Push & Go feature
• Integeated 3 position rocker switch - Automatic - Off - Permanently Open
• All door parameters, for example opening and closing speed, end stop or hold-open time can be easily adjusted
• Suitable for fire doors
• Available as an inverse option
The electromechanical swing door drive GEZE Slimdrive EMD-F stands out due to its numerous areas of application. The compact drive is only 7 cm high and can move large and heavy internal and external doors comfortably and quietly. This makes the Slimdrive EMD-F the ideal solution wherever efficiency has to be coupled with silent running. State-of-the-art control technology combined with a low-wear and maintenance free high-power motor guarantees reliable operation even for doors which are heavily frequented. All door parameters e.g. opening and closing speed as well as latching action, can be optimally adapted.
Manual door opening can be supported by the drive (servo function) and ensures that even heavy doors can be opened more easily manually. The push & go function can be activated on request, i.e. the door is only slightly opened by hand and the automatic actuation opens the door completely. In low-energy mode, the drive moves the door at reduced speed. The optional CAN interface can be used to meet demanding requirements e.g. air lock control.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Technical Specification
Max Door Weights 230KG
Max Leaf Width 1400mm
Power Supply 230v AC
Power Consumption 230W
Max Opening Speed 3s
Max Closing Speed 5s
Power Supply for Accessories 24V DC 1.2A
Ambient Operating Temperature -50 - +50c
Protection Level IP20
Dimensions mm (W x H x D) 650 x 70 x 121
Closing Force EN 3 – 5, Adjustable
385
Activation & Safety Sensors Optex
888
Automatic Drive Units Geze
Standard Push Arm
Sliding Pull Arm
Sliding Push Arm
GEZE EMD-F Swing Door Drive Unit
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
75 1
3
2
70 90
39
3939
51.2
*38
*43
8 121
29
1414
14
1218
1414
1443
10
50
1
23
121
51.2
*14
50
43 38*
10
39 39
70
95
20
1414
8
18
95
75
47
75
48
43*
1
3
2
1218
51.2
*75
48 43*
34
1414
14
75
47
3939
95
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for link arm3 = Space requirement for sensor strips
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for roller guide rail3 = Space requirement for sensor strips
* = Direct installation1 = Space requirement for EMD-F/EMD Invers2 = Space requirement for roller guide rail3 = Space requirement for sensor strips
386
Activation & Safety Sensors Optex
8
Automatic Drive Units Record
88888
Record DFA 127 Swing Door Drive Unit
(OPTIONAL)(OPTIONAL)
Performance
• BS EN 16005 compliant
• Optional Integrated sequential closing control for double-leaf fire door applications
• Approved as a hold-open system for fire protection barriers
• Extensive functionality without additional modules
• Drive housing available in stainless steel or aluminium
• Low energy, Inverse and Fire version available
The Record DFA 127 is a universal drive system for the automation of swing doors. It is characterized by sophisticated technology, compact design and smoothness of operation. The focus on a broad range of applications makes it a full-fledged drive, suitable for widely differing requirements. Its universal qualities are mainly due to its electro-mechanical construction, and partly due to its modular design. When the door drive motor operates, it simultaneously tensions a spring integrated in the drive housing. The shutting movement uses energy stored in the spring, which, depending on requirements, is also motor-assisted.
The Record DFA 127 is available to operate doors in sizes EN4 to EN6. The different spring forces required can be quickly and precisely adjusted on the spot using the special adjustment screw.
Technical Specification
Max Door Weights550KG for 600mm Leaf250KG for 900mm Leaf
Max Leaf Width 1400mm
Power Supply 230v AC
Power Consumption 67W
Max Opening Speed 3 - 20s
Max Closing Speed 5 - 20s
Power Supply for Accessories 24V DC 1A
Power Supply for Lock 24V DC 1A
Ambient operating Temperature –15 to +50 °C
Protection Level IP20
Dimensions mm (D x H x W) 124 x 85 x 600 mm
Closing Force EN 4 – 6, Adjustable
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
387
Activation & Safety Sensors Optex
888
Automatic Drive Units Record
Standard Push Arm
Sliding Push Arm
Standard armsLintel dimension
X
(in mm)
SG 1 0 - 120
SG 2 100 - 220
SG 3 210 - 320
Arm spindle extensions are available up to 75mm length.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Sliding Pull Arm
388
Activation & Safety Sensors Optex
8
Sliding Door Retro-fit Kits
88888
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Dorma 389FAAC 390Label 391Record 392
Sliding Door Retro-fit Kits
389
Activation & Safety Sensors Optex
888
Sliding Door Retro-fit Kits DORMA
DORMA ES200 (STD) Retro-fit Kit
Features & Benefits• The mechanical and electrical components have
been tested to 1,000,000 cycles with 200kg load
• Fitted into a minimum of 11 different drive units plus the Dorma ES90
• Can be used in drives with left or right positioned motors
• Suitable for door widths greater than 400mm
• All parameters the same as the ES200 Standard drive unit
• Conversion time approximately 3 hours
• Failsafe battery included in kit
Note: FM module is required when using rear edge
safety sensors
Suitable for converting:- Besam Unislide (see note below)- Besam EMC- Besam EMD- Geze TSA 350/360- Geze Econodrive- Tormax TEP/TLP- Kaba/Gilgen SLM/SLP- ATS 2000, 2001, 2002, TSF, TSS- Record STA13- Portalp Diva- DAC 300- Dorma ES90
NOTE - The kit can convert all the drive units shown above and all the components required are in the kit with the exception of the Besam Unislide, which needs the additional option Pack 13.
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Suitable for other drive units that meet the minimum space requirements as shown. Additional spacers may be required.
Min 85mm
Min 110mm
Order Code Price
D-ES200-RETRO Retro-fit Kit £1023.00
D-4000175-RETRO FM module £209.00
D-4402012 Electric lock £132.60
D-4402018 Pack 13 Unislide £41.10
D-19135602150-RETRO 5 Pos prog switch £66.70
D-5080531332-RETRO Prog sw back box £18.80
390
Activation & Safety Sensors Optex
8
Sliding Door Retro-fit Kits FAAC
88888
FAAC 1400 RKU Retro-fit Kit
Features & Benefits• Standard USB port for firmware upgrade and
download/upload configurations, timer, events log.
• Basic and Advanced programming using display and 3 buttons allowing configuration of 6 programmable inputs and 2 programmable outputs.
• Dedicated terminals for accessories and emergency inputs.
• Selection of fixing brackets supplied to aid fitting into various drive units
The A1400 RKU Retrofit Kit is simple to install and it is capable of retrofitting almost every commercial sliding door operator, including; Besam, Dorma, Ditec, Geze, Gilgen, Horton, Manusa, Record, Stanley and Tormax. (Grey cover is removable if space is limited).
Suitable for converting:- Besam ADS - Besam EMD - Ditec BIS-O - Ditec BIS-V - Dit ec Valor - Dorma ES200 - Geze TSA 350 - Geze TSA 360 - Gilgen SLX - Gilgen SLM - Record STA20- Manusa Activa
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Order Code Price
F-A1400-RETRO Retro-fit Kit £1012.00
391
Activation & Safety Sensors Optex
888
Sliding Door Retro-fit KitsLABEL
LABEL RFO1-90 & RFO1-150 Retro-fit Kit
Features & Benefits
Evolus 90 retrofit kit
• Single leaf maximum load capacity 130kg
• Double leaf maximum load capacity 90kg per leaf
Evolus 150 retrofit kit -
• Single leaf maximum load capacity 200kg
• Double leaf maxim um load ca pacit y 150kg per leaf
Note: Please specify the drive unit being converted at time of ordering
Suitable for converting: - Besam - Dorma - Kone - Doromatic - Daspi - Portalp - Ditec - Record - Geze - Stanley - Gilgen - Tormax
Fits up to 90% of existing operators in the market manufactured to comply with BS: EN16005:2012
+44 (0) 1787 221 666 +44 (0) 1787 221 668 [email protected]
Order Code Price
L-Evolus90-RETRO 90 Retro-fit Kit £948.00
L-Evolus150-RETRO 150 Retro-fit Kit £1083.00
392
Activation & Safety Sensors Optex
8
Sliding Door Retro-fit Kits RECORD
88888
RECORD STA20 Retro-fit Kit
Features & BenefitsEverything comes complete in bespoke packaging for its safety and your peace of mind during transport
• Only one engineer needed for installation
• Bespoke brackets to match the existing operator
• Built in motor lock -ON/OFF (Please request a VRR electric lock for high security sites.)
• All equipment mounted on a single easy to fit module
• Motor conversion bracket allows fitting an STA 20 motor in place of a standard “Dunkermotor”
• Control, FEM-0, battery, motor, belt and BDE-D - all in one box
• Operator specific kits - Also a universal kit that will fit 90% of all sliding operators
• Instructions included
Note: Please specify the drive unit being converted at time of ordering.
Suitable for converting:- Besam EMD- Besam EMC- Besam EML- Besam EMDE- Besam EMJ- Besam EMD v9- Besam Unislide- Ditec BIS - O- Ditec BIS - V- DOM Astroslide 2000- Dorma ES60- Dorma ES70- Dorma ES90- Dorma ES200- Geze TSA 350 N- Gilgen SLM (old)- JMD Silent Slide- Record STA 13- Record STA 14- Record STA 16- Record STA 17- Stanley Duraglide 2000- Tormax TEP- Tormax TMP- Tormax TXP- Tormax TLP- Universal Kit- Waldoor UWS 2400
Order Code Price
RE-STA20-RETRO Specified kit £1113.00
RE-STA20-RETRO-UNI Universal kit £1113.00
RE-020808415 VRR electric lock £192.00