1
RESUME – Charng Hsein JUANG
PERSONAL DATA
Professor, Glenn Civil Engineering Department
214 Lowry Hall, Clemson University, Clemson, SC 29634-0911
Phone 864-656-3322 Fax 864-656-2670
e-mail: [email protected]
EDUCATION
Ph.D., Purdue University, 1981, Civil Engineering
M.S. National Cheng Kung University, 1976, Civil Engineering
B.S. National Cheng Kung University, 1974, Civil Engineering
PROFESSIONAL REGISTRATION
Professional Engineer, South Carolina, No. 11968 (1987-present)
PROFESSIONAL EXPERIENCE
Clemson University, Glenn Professor of Civil Engineering, 2012-present
China University of Geosciences (Wuhan), Overseas Chair Professor, 2016-2018
Wuhan University, Chu-Tian Chair Professor, China, 2014 – 2018
Tongji University, Chair Professor of the Innovation Center for Disaster Prevention,
College of Civil Engineering, 2014-2018
Tongji University, Kwang Hua Visiting Professor, June 2011
National Central University, Chair Professor of Civil Engineering, 2008-2014
National Taiwan University of Science and Technology,
Honorary Chair Professor of Civil Engineering, July – December 2009
National Cheng Kung University, 1993-1994, Visiting Research Professor
Clemson University, 1992-2012, Professor
Clemson University, 1986-1992, Associate Professor
U.S.A.E. Waterways Experiment Station, May - August 1985, Civil Engineer
Clemson University, 1982-86, Assistant Professor
Purdue University, 1981-82, Postdoctoral Fellow (with late Professor G.A. Leonards)
MEMBERSHIP
American Society of Civil Engineers (ASCE) - Fellow
Geo Institute (GI) - member
Association of Drilled Shaft Contractors (ADSC) – Member
International Society for Soil Mech. and Geotech. Engineering (ISSMGE) – Member
ASCE-GI Technical Committee on Risk Assessment and Management – Past chair
2
PUBLICATIONS
Edited Journal Issues and ASCE Geotechnical Special Publication
“Reconnaissance of the Chi-Chi Earthquakes, Taiwan,” Engineering Geology, Vol. 71,
Nos. 1-2, 2004. C. H. Juang, editor.
“Soil liquefaction: Evaluation, implementation, and in situ tests,” Soil Dynamics and
Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, C. H. Juang, editor.
“Reconnaissance of Extreme Natural Disasters of Morakot Typhoon, Taiwan,”
Engineering Geology, Vol. 123, Nos. 1–2, 2011, C. H. Juang, editor.
“GeoRisk2011 – Geotechnical Risk Assessment and Management,” Geotechnical
Special Publications (GSP) 224, ASCE, CD-ROM, 1250 pp., ISBN 978-0-7844-1183-4.
C. H. Juang, K.K. Phoon, A.J. Puppala, R.A. Green, and G.A. Fenton, editors.
Book Chapter
Juang, C.H., Fang, S.F, and Li, D.K, “Reliability analysis of liquefaction potential of
soils using standard penetration test,” Chapter 13, in Reliability-Based Design in
Geotechnical Engineering – Computations and Applications, KK Phoon editor, Taylor &
Francis, London and New York, 2008.
Juang, C.H., Khoshnevisan, S., and Zhang, J., “Maximum likelihood principle and its
application in soil liquefaction assessment,” Chapter 4, in Risk and Reliability in
Geotechnical Engineering, K.K. Phoon and J. Ching, editors, CRC Press, 2014.
Refereed Articles
Juang, C.H., "A Study of Factors Controlling Slope Stability in the Mudstone Area,"
Journal of Chinese Institute of Civil and Hydraulic Engineering, No. 3, Vol. 3, pp. 29-53,
1976.
Leonards, G.A., and Juang, C.H., Discussion of "Field Tests of Long-Span Aluminum
Culvert," Journal of Geotechnical Engineering, ASCE, 110 (1), 1984, pp. 119-125.
Leonards, G.A., Juang, C.H., Wu, T.H., and Stetkar, R.E., "Predicting Performance of
Buried Metal Conduits," Transportation Research Record, Vol. 1008, pp. 42-52, 1984.
Leonards, G.A. and Juang, C.H., "Predicting Performance of Buried Metal Pipe Arches,"
Transportation Research Record, Vol. 1008, pp. 53-57, 1985.
Juang, C.H. and Chao, L.P., "Evaluation of Design Specifications for Buried Steel Pipes
Subjected to Overburden Loads," International Journal of Pipelines, 5(1986), pp.
3
267-276.
Juang, C.H. and Holtz, R.D., "A Probabilistic Permeability Model and the Pore Size
Density Function," International Journal for Numerical and Analytical Methods in
Geomechanics, Vol. 10, 1986, pp. 543-553.
Juang, C.H. and Holtz, R.D., "A Note on Preparation of Specimens of Noncohesive
Material for Mercury Intrusion Porosimetry," Geotechnical Testing Journal, ASTM, Vol.
9, No.3, 1986, pp. 154-155.
Juang, C.H. and Holtz, R.D., "Fabric, Pore Size, and Permeability of Sandy Soils,"
Journal of Geotechnical Engineering, ASCE, Vol. 112, No. 9, 1986, pp. 855-868.
Juang, C.H. and Elton, D.J., "Fuzzy Logic for Estimation of Earthquake Intensity Based
on Building Damage Records," Civil Engineering and Environmental Systems (formerly,
Journal of Civil Engineering Systems), Vol. 3, 1986, pp. 187-191.
Juang, C.H. and Lovell, C.W., "Measurement of Pore Size Density Function in Sand,"
Transportation Research Record, Vol. 1089, 1987, pp. 97-101.
Juang, C.H., Burati, J.L., and Kalidindi, S.N., "A Fuzzy System for Bid Proposal
Evaluation Using Microcomputers," Journal of Civil Engineering Systems, Vol. 4, No. 3,
1987, pp. 124-130.
Lee, D.H. and C.H. Juang, "Use of Permeability as An Index to Characterize Internal
Structural Changes and Fracture Mechanism of a Soft Rock Under Triaxial Loadings,"
Geotechnical Testing Journal, ASTM, Vol. 11, No. 1, 1988, pp. 63-68.
Juang, C.H., "Development of a Decision Support System Using Fuzzy Sets," Journal of
Microcomputers in Civil Engineering, Vol. 3, No. 2, 1988, pp. 157-165.
Elton, D.J. and Juang, C.H., "Asphalt Pavement Evaluation Using Fuzzy Sets,"
Transportation Research Record, No. 1196, 1989, pp. 1-6.
Juang, C.H. and Lee, D.H., "Development of an Expert System for Rock Mass
Classification," Journal of Civil Engineering Systems, Vol. 6, pp. 147-156, 1989.
Tien, Y.M., Lee, D.H. and Juang, C.H., "Strain, Pore Pressure and Fatigue
Characteristics of Sandstone Under Various Load Conditions," Journal of Rock Mech.
and Mining Science & Geomechanics Abstract, Vol. 27, No. 4, pp. 283-289, 1990.
Juang, C.H. and Ulshafer, M.L., "Development of An Expert System for Preliminary
Selection of Pile Foundation," Transportation Research Record, No. 1277, pp. 153-160.
1990.
4
Juang, C.H., "A Performance Index For the Unified Rock Classification System," The
Bulletin of the Association of Engineering Geologists, Vol. XXVII, No. 4, pp. 497-503,
1990.
Juang, C.H., Huang, X.H. and Elton, D.J., "Fuzzy Information Processing by the Monte
Carlo Simulation Technique," Journal of Civil Engineering Systems, Vol. 8, pp. 19-25,
1991.
Lee, D.H. and Juang, C.H., "A New Technique for Measuring the Roughness Profile of
Rock Joints," Geotechnical Testing Journal, ASTM, Vol. 14, No. 3, pp. 320-322, 1991.
Juang, C.H. Wey, J.L., and Elton, D.J., "Model for Capacity of Single Piles in Sand
Using Fuzzy Sets," Journal of Geotechnical Engineering, ASCE, Vol. 117, No. 12, pp.
1920-1931, 1991.
Juang, C.H., Lee, D.H., Sheu, C., "Mapping Slope Failure Potential Using Fuzzy Sets,"
Journal of Geotechnical Engineering, ASCE, Vol. 118, No. 3, pp. 475-494, 1992.
Juang, C.H., Huang, X.H., and Elton, D.J., "Modeling and Analysis of Non-Random
Uncertainties - A Fuzzy Set Approach," Journal for Numerical and Analytical Methods
in Geomechanics, Vol. 16, pp. 335-350, 1992.
Lee, D.H. and Juang, C.H., "Evaluation of Failure Potential of Slopes in Mudstone-
Dominant Sloping Lands Using Fuzzy Sets," ASCE Geotechnical Special Publication
No. 31, Stability and Performance of Slopes and Embankment, pp. 1137-1151, 1992.
Juang, C.H. and Amirkhanian, S.N., "A Unified Pavement Distress Index for Managing
Flexible Pavements," Journal of Transportation Engineering, ASCE, Vol. 118, pp. 686-
699, 1992.
Juang, C.H., Huang, X.H. and Schiff, S.D., "Determination of Weights of Criteria for
Decision Making by the Fuzzy Eigenvector Method," Journal of Civil Engineering
Systems, Vol. 9, pp. 1-16, 1992.
Juang, C.H. and Huang, X.H., "Aggregating Expert Opinions by Fuzzy Entropy
Method," Journal of Civil Engineering Systems, Vol. 9, pp. 89-104, 1992.
Aziz, N., Santanu, S., and Juang, C.H., "Polynomial Approximation of Equipotential
Lines for Flow under a Dam," Computers and Geomechanics, Vol. 13, pp. 119-133,
1992.
Juang, C.H., Huang, X.H., and Holtz, R.D., "Determination of Fuzzy Relationship by
Fuzzy Regression," Journal of Civil Engineering Systems, Vol. 9, pp. 299-318, 1992.
Juang, C.H., Lee, D.H., and Chang, C.I., "A New Model of Shear strength of Rock
5
Joints," ASTM Geotechnical Testing Journal, Vol. 16, No. 1, pp. 70-75, 1993.
Juang, C.H., Clark, J.E., and Gohsh, P., "Representation, Processing, and Interpretation
of Fuzzy Information in Civil Engineering," Transportation Research Record 1139,
pp.20-27, 1993.
Elton, D.J., Juang, C.H., and Russell, J.S., "Contractor Prequalification Using Fuzzy
Sets," Journal of Civil Engineering Systems, Vol. 11, pp. 1-17, 1994.
Juang, C.H., Lee, K., and Chen, J.W., "A New Approach for Siting Landfills Using
Fuzzy Sets," Journal of Civil Engineering Systems, Vol. 12, pp. 85-103, 1995.
Juang, C.H., Wu, S., and Sheu, H.J., "A Group Decision Making Model for Siting
LULUs," The Environmental Professional, (new title: Environmental Practice), Vol. 17,
pp. 43-50, 1995.
Desai, V.R., Aziz, N.M., and Juang, C.H., "Uncertainty and Sensitivity Analysis in a
Low-Head Hydro System," Journal of Civil Engineering Systems, Vol. 12, No. 3, pp.
207-217, 1995.
Ni, S.H., Lu, P.C., and Juang, C.H., "A Fuzzy Neural Network Approach to Evaluation
of Slope Failure Potential," Journal of Microcomputers in Civil Engineering, Vol. 11, pp.
59-66, 1995.
Madhu, S., Juang, C.H., Chen, J.W., and Lee, D.H., "A Fuzzy System for Rock Mass
Classification and Tunnel Support Selection," Journal of Civil Engineering Systems,
Vol. 12, No. 4, pp. 307-325, 1995.
Elton, D. J., Juang, C. H., and Sukumaran, B., "Liquefaction Susceptibility Evaluation
Using Fuzzy Sets," Soils and Foundations, Japanese Society of Soil Mechanics and
Foundation Engineering, Vol. 35, No. 2, pp. 49-60, 1995.
Juang, C.H., Huang, X.H., Holtz, R.D. and Chen, J.W., "Determining Relative Density
of Sands from CPT Using Fuzzy Sets," Journal of Geotechnical Engineering, ASCE,
Vol. 122, No. 1, pp.1-6, January, 1996.
Chang, H.W., Tien, T.M., and Juang, C.H., "Formation of South-facing Bald Mudstone
Slopes in Southwestern Taiwan," Engineering Geology, Vol. 42, No. 1, pp. 37-49,
April, 1996.
Lee, D.H., Tien, K.G., and Juang, C.H., "Full-scale Field Experimentation of a New
Technique for Protecting Mudstone Slopes," Engineering Geology, Vol. 42, No. 1, pp.
51-63, 1996.
Chen, J.W. and Juang, C.H., "Determining Drained Friction Angle of Sands from CPT",
6
ASCE Journal of Geotechnical Engineering, Vol. 122, No. 5, pp. 374-381, 1996.
Lee, D.H., Juang, C.H. and Lei, I.M., "High-Temperature Brazilian Test for Tensile
Strength of Metamorphic Limestone," ASTM Geotechnical Testing Journal, Vol. 19,
No.2, pp. 223-226, 1996.
Juang, C.H. and Elton, D.J., “A Practical Approach to Uncertainty Modeling in
Geotechnical Engineering,” ASCE Geotechnical Special Publication No. 58,
Uncertainty in the Geologic Environment: from Theory to Practice, Vol. 2, pp. 1269-
1283, 1996.
Huang, X.H. and Juang, C.H., "Interpretation of CPT for Strength of Sand Considering
Uncertainty," Transportation Research Record, No. 1526, pp. 57-63, 1996.
Ni, S.H., Juang, C. H. and Lu, P.C., "Estimation of Dynamic Properties of Sands Using
Artificial Neural Networks," Transportation Research Record, No. 1526, pp. 1-5, 1996.
Lin, P.S., Wu, X.H., and Juang, C.H., "Equivalent Wheel Load Factor for Rigid
Pavements," Journal of Transportation Engineering, ASCE, Vol. 122, No. 6, pp. 462-
467, 1996.
Juang, C. H., Elton, D.J., and Lin, P.S., "Estimation of Vertical Capacity of Singles Piles
Considering Uncertainties," Transportation Research Record, No. 1582, pp. 68-72, 1997.
Juang, C.H. and Elton, D.J., "Predicting Collapse Potential of Soils with Neural
Networks," Transportation Research Record, No. 1582, pp. 22-28, 1997.
Lin, P.S., Wu, Y.T., Juang, C.H., and Huang, T.K., "Determination of Elastic Moduli of
Jointed Concrete Pavements Using Road Rater Data," Journal of Transportation
Engineering, ASCE, Vol. 124, No. 4, pp. 123-127, March 1998.
Juang, C.H., Jhi, Y.Y., and Lee, D.H., “Stability Analysis of Existing Slopes Considering
Uncertainty,” Engineering Geology, Vol. 49, pp. 111-122, 1998.
Lin, P.S., Yang, L.W., and Juang, C.H., "Subgrade Reaction and Load-Settlement
Characteristics of Gravelly Cobble Deposits by Plate Load Test," Canadian Geotechnical
Journal, Vol. 35, pp. 801-810, 1998.
Juang, C.H. and Chen, C. J., “CPT-Based Liquefaction Evaluation Using Artificial
Neural Networks,” Journal of Computer-Aided Civil and Infrastructure Engineering,
Vol. 14, pp. 221-229, 1999.
Juang, C.H., Ni, S.H., and Lu, P.C., “Training Artificial Neural Networks with the Aid
of Fuzzy Sets,” Journal of Computer-Aided Civil and Infrastructure Engineering, Vol.
14, No. 6, pp. 407-415, 1999.
7
Juang, C.H., Rosowsky, D.V., and Tang, W.H., "Reliability-based method for assessing
liquefaction potential of sandy soils," ASCE Journal of Geotechnical and
Geoenvironmental Engineering, Vol. 125, No. 8, pp. 684-689, 1999.
Juang, C.H., Chen, C.J., and Tien, Y.M., “Appraising CPT-Based Liquefaction
Resistance Evaluation Methods – Artificial Neural Network Approach,” Canadian
Geotechnical Journal, Vol. 36, No. 3, pp. 443-454, 1999.
Lee, D.H., Juang, C.H., Chen, J.W., Lin, H.M., and Shieh, W.H., "Stress paths and
mechanical behaviors of a sandstone in hollow cylinder test," Int. Journal of Rock
Mechanics and Mining Sciences, Vol. 36, pp. 857-870, 1999.
Lin, P.S., Chang, C.W. and Juang, C.H., "Probabilistic sensitivity analysis for one-
dimensional solute transport," Journal of Civil Engineering and Environmental Systems,
Vol. 17, No. 1, pp. 39-61, Gordon & Breach Science Publ. Inc., 1999.
Juang, C.H. and Chen, C.J., "A rational method for development of limit state for
liquefaction evaluation based on shear wave velocity data," Int. Journal for Numerical
and Analytical Methods in Geomechanics, Vol. 24, pp. 1-27, 2000.
Lin, S.Y., Lin, P.S., Luo, H.S., and Juang, C.H. "Shear modulus and damping ratio
characteristics of gravelly deposits," Canadian Geotechnical Journal, Vol. 37, pp. 638-
651, 2000.
Elton, D.J., Juang, C.H., and Lin, P.S., "Vertical capacity of piles using fuzzy sets,"
Journal of Civil Engineering and Environmental Engineering, Vol. 17, No. 3, pp. 237-
262, Gordon & Breach Science Publ. Inc., 2000.
Chen, C. J. and Juang, C.H., "Calibration of SPT- and CPT-based liquefaction
evaluation methods," Innovations and Applications in Geotechnical Site
Characterization, Geotechnical Special Publication No. 97, P.W. Mayne and R.
Hryciw eds., ASCE, Reston, VA, pp. 49-64, 2000.
Chiru-Danzer, M., Juang, C.H., and Christopher, R., "Estimation of liquefaction-
induced vertical displacements using multi-linear regression analysis," Soil Dynamics
and Liquefaction, Geotechnical Special Publication No. 107, R.Y.S. Pak and J.
Yamamura, eds., ASCE, Reston, VA, pp. 92-107, 2000.
Juang, C.H. and Jiang, T., "Assessing probabilistic methods for liquefaction potential
evaluation," Soil Dynamics and Liquefaction, Geotechnical Special Publication No.
107, R.Y.S. Pak and J. Yamamura, eds., ASCE, Reston, VA, pp. 148-162, 2000.
Juang, C.H., Chen, C.J., Tang, W.H., and Rosowsky, D.V., "CPT-based liquefaction
analysis, Part 1: Determination of limit state function," Geotechnique, Vol. 50, No. 5, pp.
583-592, 2000.
8
Juang, C.H., Chen, C.J., Rosowsky, D.V., and Tang, W.H., "CPT-based liquefaction
analysis, Part 2: Reliability for design, Geotechnique, Vol. 50, No. 5, pp. 593-599, 2000.
Juang, C.H., Chen, C.J., Jiang, T., and Andrus, R.D., "Risk-based liquefaction
potential evaluation using standard penetration tests," Canadian Geotechnical Journal,
Vol. 37, No. 6, pp. 1195-1208, 2000.
Chiru-Danzer, M., Juang, C.H., Christopher, R., and Suber, J., "Estimation of
liquefaction-induced horizontal displacements using artificial neural networks,"
Canadian Geotechnical Journal, Vol. 38, No. 1, pp. 200-207, 2001.
Juang, C.H., Chen, C.J., and Jiang, T., "A probabilistic framework for liquefaction
potential by shear wave velocity," Journal of Geotechnical and Geoenvironmental
Engineering, ASCE, Vol. 127, No. 8, pp. 670-678, 2001.
Juang, C.H., Lu, P.C., and Chen, C.J., "Predicting geotechnical parameters of sands
from CPT measurements using neural networks," Journal of Computer-Aided Civil and
Infrastructure Engineering, Vol. 17, pp. 31-42, 2001.
Lee, D.H., Juang, C.H., and Ku, C.S., "Liquefaction performance of soils at the site of
a partially completed ground improvement project during the 1999 Chi-Chi earthquake
in Taiwan," Canadian Geotechnical Journal, Vol. 38, No. 6, pp. 1241-1253, 2001.
Juang, C.H., Jiang, T., and R. Christopher, "Three-dimensional site characterization –
neural network approach," Geotechnique, Vol. 51, No. 9, pp. 799-809, 2001.
Lin, S.S., Liao, J.C., Yang, T.S., and Juang, C.H., “Nonlinear response of single
concrete piles,” Geotechnical Engineering, Journal of the Southeast Asian
Geotechnical Society, pp. 165-175, December 2001.
Juang, C.H., Yuan, H., Lee, D.H., and Ku, C.S., “Assessing CPT-based methods for
liquefaction evaluation with emphasis on the cases from the Chi-Chi, Taiwan,
earthquake,” Soil Dynamics and Earthquake Engineering, Vol. 22, No. 3, 2002, pp.
241-258.
Juang, C.H., Jiang, T., and Andrus, R.D., “Assessing probability-based methods for
liquefaction evaluation,” Journal of Geotechnical and Geoenvironmental Engineering,
ASCE, Vol. 128, No. 7, July 2002, pp. 580-589.
Lee, D.H., Juang, C.H., Lin, H.M., and Yeh, S.H., “Mechanical behavior of Tien-Liao
mudstone in hollow cylinder tests,” Canadian Geotechnical Journal, Vol. 39, No. 3,
June 2002, pp. 744-756.
Lee, D.H., Juang, C.H., and Lin, H.M., “Yield surface of Mu-San sandstone by hollow
cylinder tests,” Rock Mechanics and Rock Engineering, Vol. 35, No. 3, 2002, pp. 205-
9
216.
Lin, S.S., Liao, J.C., Liang, T.T., and Juang, C.H., “Use of Bouc-Wen model for
seismic analysis of concrete piles,” Geotechnical Special Publication No. 116, M.W.
O’Neill and F.C. Townsend, eds., ASCE, 2002, pp. 372-384.
Yang, C.C., Lin, S.S., Juang, C.H., and Lee, W.F., “Analysis of laterally loaded piles
in a two-layer elastic medium,” Geotechnical Special Publication No. 116, M.W.
O’Neill and F.C. Townsend, eds., ASCE, 2002, pp. 80-94.
Lin, S.S., Yeh, S.C., Juang, C.H., and Chang, Y.H., “Statnamic tests for six long rock-
socketed shafts,” Geotechnical Special Publication No. 113, T.L. Brandon, ed., ASCE,
2002, pp. 524-538.
Juang, C.H., Yuan, H., Lee, D.H., and Lin, P.S. "Simplified cone penetration test-based
method for evaluating liquefaction resistance of soils," Journal of Geotechnical and
Geoenvironmental Engineering, ASCE, Vol. 129, No. 1, 2003, pp. 66-80.
Juang, C.H. and Jiang, T., “A New Approach to Site Characterization Using
Generalized Regression Neural Network,” Geotechnical Special Publication No. 121,
ASCE, 2003, pp. 79-99.
Yuan, H., Yang, H., Andrus, R.D., and Juang, C.H., “Liquefaction-induced ground
failure: A study of the Chi-Chi Earthquake cases,” Engineering Geology, Vol. 71, Nos.
1-2, 2004, pp. 141-155.
Andrus, R.D., Stokoe, K. H., and Juang, C.H., “Guide for Shear Wave-Based
Liquefaction Potential Evaluation,” Earthquake Spectra, Vol. 20, No. 2, 2004, pp. 285-
308.
Juang, C.H., “Editorial - Soil Liquefaction: Evaluation, Instrumentation, and In Situ
Tests” Soil Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, p. 633, 2004.
Kramer, S.L., Juang, C. H., and Huang, A.B., “U.S.-Taiwan Workshop on Soil
Liquefaction: Overview and Research Needs,” Soil Dynamics and Earthquake
Engineering, Vol. 24, Nos. 9-10, 2004, pp. 635-637.
Andrus, R.D., Piratheepan, P., Ellis, E., Zhang, J., and Juang, C.H., “Comparing
liquefaction evaluation methods using penetration-Vs relationships,” Soil Dynamics
and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, pp. 713-721.
Juang, C.H., Yang, S.H., Yuan, H. and Khor, E.H., “Characterization of the
uncertainty of the Robertson and Wride model for liquefaction potential,” Soil
Dynamics and Earthquake Engineering, Vol. 24, Nos. 9-10, 2004, pp. 771-780.
10
Juang, C.H., Fang, Y., and Li, K., “Reliability Analysis of Soil Liquefaction Potential,”
Geotechnical Special Publication No. 133, ASCE, Reston, VA, January 2005.
Hwang, J.H., Chen, C.H., and Juang, C.H., “Liquefaction Hazard Analysis: A Fully
Probabilistic Method,” Geotechnical Special Publication No. 133, ASCE, Reston, VA,
January 2005.
Wu, J.H., Juang, C.H., and Lin, H.M., “Vertex-to-Face Contact Searching Algorithm
for Three-Dimensional Frictionless Contact Problems,” International Journal for
Numerical Methods in Engineering, Vol. 63, March 2005, pp. 876-897.
Zhang, J., Andrus, R.D., and Juang, C. H., “Estimating Normalized Shear Modulus
and Material Damping Ratio,” Journal of Geotechnical and Geoenvironmental
Engineering, Vol. 131, No. 4, April 2005, pp. 453-464.
Juang, C. H., Yuan, H., Li, D.K., Yang, S. H., Christopher, R. A., “Estimating severity of
liquefaction-induced damage near foundation,” Soil Dynamics and Earthquake
Engineering, Vol. 25, No. 5, July 2005, pp. 403-411.
Juang, C. H., Yang, S. H., and Yuan, H., “On the Model Uncertainty of Shear Wave
Velocity-Based Methods for Liquefaction Potential Evaluation,” Journal of
Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 10, Oct., 2005, pp.
1274-1282.
Juang, C.H., Yang, S.H., and Yuan, H., Fang, S.Y., “Liquefaction in the Chi-Chi
earthquake: Effect of Capping Non-liquefiable layers,” Soils and Foundations, Japanese
Geotechnical Society, Vol. 45, No. 6, 2005, pp. 89-102.
Juang, C.H., Fang, S.Y., and Khor, E.H. “First Order Reliability Method for
Probabilistic Liquefaction Triggering Analysis Using CPT,” Journal of Geotechnical
and Geoenvironmental Engineering, Vol. 132, No. 3, March 2006, pp. 337-350.
Li, D.K., Juang, C.H., and Andrus, R.D., “Estimation of Liquefaction Effect by Means
of Liquefaction Potential Index,” Geotechnical Special Publication, No. 152, ASCE,
Reston, VA, June 2006, pp. 359-364.
Hsiao, C.L., Kung, T.C., Juang, C.H., and Schuster, M., “Estimation of Wall
Deflection in Deep Excavation – Neural Network Approach,” Geotechnical Special
Publication, No. 155, ASCE, Reston, VA, June 2006, pp. 348-354.
Kung, T.C., Juang, C.H., and Hsiao, C.L., “Ground Settlement Caused by Excavation
in Clay – An Empirical Method,” Geotechnical Special Publication, No. 155, ASCE,
Reston, VA, June 2006, pp. 363-370.
Fang, S.Y., Juang, C.H. and Tang, W.H., “A Probabilistic Model for Liquefaction
11
Triggering Analysis Using SPT,” Geotechnical Special Publication No. 153, ASCE,
Reston, VA, June 2006, pp. 23-28.
Li, D.K., Juang, C.H., and Andrus, R.D. “Liquefaction Potential Index: A Critical
Assessment,” Journal of GeoEngineering, Taiwanese Geotechnical Society, Vol. 1,
No. 1, August 2006, pp. 11-24.
Tien, Y.M., Kuo, M.C., and Juang, C.H., “An experimental investigation of the failure
mechanism of simulated transversely isotropic rocks,” International Journal of Rock
Mechanics and Mining Sciences, Vol. 43, 2006, pp. 1163-1181.
Li, D.K., Juang, C.H., Andrus, R.D., and Camp, W.M., “Index Properties-Based
Criteria for Liquefaction Susceptibility of Clayey Soils: A Critical Assessment,”
Journal of Geotechnical and Geoenvironmental Engineering, Vol. 133, No. 1, January
2007, pp. 110-115.
Chi, Y.Y., Lee, Y.F., Lee, D.H., Juang, C.H., and Wu, J.H., “Simplified Models for
Assessing Annual Liquefaction Probability – A Case Study of the Yuanlin Area,
Taiwan,” Engineering Geology, Vol. 90, Nos. 1-2, 2007, pp. 71-88.
Hsiao, C.L., Juang, C.H., Kung, T.C., and Schuster, M. J., "Reliability analysis and
updating of excavation-induced ground settlement for building serviceability
evaluation", Geotechnical Special Publication No. 170, ASCE, Reston, VA, 2007.
Schuster, M.J., Juang, C.H., Roth, M.J.S., Hsiao, C.L., and Kung, T.C., "Serviceability
limit state for probabilistic characterization of excavation-induced building damage,"
Geotechnical Special Publication No. 170, ASCE, Reston, VA, 2007.
Kung, T.C., Juang, C.H., Hsiao, C.L., and Hashash, Y. “A simplified models for wall
deflection and ground surface settlement caused by braced excavation in clays,”
Journal of Geotechnical and Geoenvironmental Engineering, Vol. 133, No. 6, 2007,
pp. 731-747.
Xiao F., Amirkhanian, S., and Juang, C.H., “Rutting resistance of rubberized asphalt
concrete pavements containing reclaimed asphalt pavement mixtures,” Journal of
Materials in Civil Engineering, ASCE, Vol. 19, No. 6, 2007, pp. 475-483.
Juang, C.H. and Li, K, D., “Assessment of liquefaction hazards in Charleston
quadrangle, South Carolina,” Engineering Geology, Vol. 92, 2007, pp. 59-72.
Kung, T.C., Hsiao, C.L., and Juang, C.H., “Evaluation of a simplified small-strain soil
model for analysis of excavation-induced movements,” Canadian Geotechnical
Journal, Vol. 44, 2007, pp. 726-736.
Kung, T.C., Hsiao, C.L., Schuster, M., and Juang, C.H., “A neural network approach
12
to estimating excavation-induced wall deflection in soft clays,” Computers and
Geotechnics, Vol. 34, 2007, pp. 385-396.
Zhang, J., Andrus, D.A., and Juang, C.H., “Model uncertainty in normalized shear
modulus and damping relationships,” Journal of Geotechnical and Geoenvironmental
Engineering, Vol. 134, No. 1, 2008, pp. 24-36.
Chen, C.H., Juang, C.H., and Schuster, M.J., “Empirical model for liquefaction
resistance of soils based on artificial neural network learning of case histories,”
Geotechnical Special Publication No. 179, ASCE, Reston, VA, 2008, pp. 854-861.
Juang, C.H., Li, K., Fang, Y., Liu, Z., and Khor, E.H., “Simplified Procedure for
Developing Joint Distribution of amax and Mw for Probabilistic Liquefaction Hazard
Analysis,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No.
8, 2008, pp. 1050-1058.
Juang, C.H., Liu, C.N., Chen, C.H., Hwang, J.H., and Lu, C.C., “Calibration of
liquefaction potential index: A re-visit focusing on a new CPTU model,” Engineering
Geology, Vol. 102, No. 1-2, 2008, pp. 19-30.
Hsiao, E.C.L., Schuster, M., Juang, C.H., and Kung, T.C., "Reliability Analysis of
Excavation-Induced Ground Settlement for Building Serviceability evaluation,"
Journal of Geotechnical and Geoenvironmental Engineering, Vol. 134, No. 10, 2008
pp. 1448-1458.
Schuster, M.J., Juang, C.H., Roth, Mary J.S., and Rosowsky, D.V., “Reliability
Analysis of Building Serviceability Problems Caused by Excavation,” Geotechnique,
Vol. 58, No. 9, 2008, pp. 743-749.
Juang, C.H., Chen, C.H. and Mayne, P.W., “CPTU simplified stress-based model for
evaluating soil liquefaction potential,” Soils and Foundations, Vol. 48, No. 6, 2008,
pp. 755-770.
Tsai, P.H., Lee, D.H., Kung, G.T.C., and Juang, C.H., “Simplified DMT-based
methods for evaluating liquefaction resistance of soils,” Engineering Geology, Vol.
103, No. 1-2, 2009, pp. 13-22.
Kung, G.T.C., Ou, C.Y., and Juang, C.H., "Modeling small-strain behavior of Taipei
clays for finite element analysis of braced excavations," Computers and Geotechnics,
Vol. 36, 2009, pp. 304-319.
Juang, C.H., Fang, S.Y., Tang, W.H., Khor, E.H., Kung, G.T.C., and Zhang, J.,
“Evaluating model uncertainty of an SPT-based simplified method for reliability
analysis for probability of liquefaction,” Soils and Foundations, Vol. 49, No. 1, 2009,
pp. 147-152.
13
Schuster, M. and Juang, C.H. “Reliability assessment of damage potential of buildings
caused by excavation,” Geotechnical Special Publication, ASCE, No. 186, 2009,
pp.286-291.
Schuster, M., Juang C.H., and Lee, D.H., “Updating of soil parameters for improving
the accuracy of the excavation-induced building damage assessment,” Geotechnical
Special Publication, ASCE, No. 186, 2009, pp.308-315.
Juang, C.H., Lu, C.C. and Hwang, J.H., “Assessing probability of surface
manifestation of liquefaction in a given exposure time using CPTU,” Engineering
Geology, Vol. 104, 2009, pp. 223-231.
Lin, H.M., Shun-Kung Chang, S.K., Wu, J.H., and Juang, C.H., “Neural network-
based model for assessing failure potential of highway slopes in the Alishan, Taiwan
area: pre- and post-earthquake investigation,” Engineering Geology, Vol. 104, 2009,
pp. 280-289.
Xiao F., Amirkhanian, S., and Juang, C.H., “Prediction of fatigue life of rubberized
asphalt concrete mixtures containing reclaimed asphalt pavement using artificial
neural networks,” Journal of Materials in Civil Engineering, ASCE, Vol. 21, No. 6,
2009, pp. 253-261.
Lu, C.C., Hwang, J.H., Ku, C.S., Juang, C.H., and Luo, Z., “Framework for Assessing
Probability of Exceeding a Specified Liquefaction-Induced Settlement at a Given Site
in a Given Exposure Time,” Engineering Geology, Vol. 108, Nos. 1-2, September
2009, pp. 24-35.
Peñalba, R.F., Luo, Z., and Juang, C.H., “Framework for probabilistic assessment of
landslide: a case study of El Berrinche,” Environmental Earth Sciences, Volume 59,
Number 3, December 2009, pp. 489-499. DOI: 10.1007/s12665-009-0046-0.
Schuster, M.J., Kung, G.T.C., Juang, C.H., and Hashash, Y.M.A., “Simplified model
for evaluating damage potential of buildings adjacent to a braced excavation,” Journal
of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 135, No. 12,
December 2009, pp. 1823-1835.
Wu, S.H., Ou, C.Y., Ching, J., and Juang, C.H., “Reliability-based design for basal
heave in an excavation considering spatial variability,” Geotechnical Special
Publication (GSP) No. 199, Advances in Analysis, Modeling, & Design. 2010. (doi
10.1061/41095(365)194).
Ku, C.S., Juang, C.H., and Ou, C.Y., “Reliability of CPT Ic as an index for mechanical
behaviour classification of soils,” Geotechnique, Vol. 60, No. 11, 2010, pp. 861-875.
Koduru, H.K., Xiao F., Amirkhanian S. N. and Juang, C.H., “Development of a
14
methodology for the evaluation of flexible pavement distresses,” Journal of
Transportation Engineering (ASCE) Vol. 136, No.2, 2010, pp.149-157.
Juang, C.H., Ou, C.Y., Lu, C.C., and Luo, Z, “Probabilistic framework for assessing
liquefaction hazard at a given site in a specified exposure time using Standard
Penetration Test,” Canadian Geotechnical Journal, Vol. 47, No. 6, 2010, pp. 674-687.
Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., “Annual Probability and Return
Period of Soil Liquefaction in Yuanlin, Taiwan Attributed to Chelungpu Fault and
Changhua Fault,” Engineering Geology, Vol. 114, No. 3-4, 2010, pp. 343-353.
Koduru, H.K., Xiao F., Amirkhanian S. N. and Juang C.H., "Development of a
methodology for the evaluation of flexible pavement distresses" Journal of
Transportation Engineering, ASCE, Vol. 136, No.2, 2010, pp.149-157.
Juang, C.H., Schuster, M.J., Ou, C.Y., and Phoon, K.K., “Fully probabilistic
framework for evaluating excavation-induced building damage potential,” Journal of
Geotechnical and Geoenvironmental Engineering, Vol. 137, No. 2, 2011, pp. 130-139.
Chang, S.K., Lee, D.H., Wu, J.H., and Juang, C.H., “Rainfall-based criteria for
assessing slump rate of mountainous highway slopes: A case study of slopes along
Highway 18 in Alishan, Taiwan,” Engineering Geology, Vol. 118, No. 3-4, 2011, pp.
63-74.
Chi, Y.Y., Lee, Y.F., Juang, C.H., Wu, Y.L., and Wu, Y.P., “Probability-based Risk
Assessment of Landslide/Slope Failure,” Geotechnical Special Publication, No. 224,
GeoRisk 2011, ASCE, 2011, pp. 979-987.
Ku, C.S., Juang, C.H., Ching, J., and Lee, D.H., “Liquefaction probability by
probabilistic version of Robertson and Wride model,” Geotechnical Special
Publication, No. 224, GeoRisk 2011, ASCE, 2011, pp. 247-254.
Luo, Z., Juang, C.H., and Huang, F.K., “Wall and ground responses in a braced
excavation considering spatial variability,” Geotechnical Special Publication, No. 224,
GeoRisk 2011, ASCE, 2011, pp. 770-777.
Juang, C.H., Phoon, K.K., Puppala, A.J., Green R.A., and Fenton, G.A., “Preface -
GeoRisk2011: Geotechnical Risk Assessment and Management.” ASCE Geotechnical
Special Publications (GSP) 224, CD-ROM, ISBN 978-0-7844-1183-4.
Juang, C.H., “Preface - Reconnaissance of Extreme Natural Disasters of Morakot
Typhoon, Taiwan.” Engineering Geology, Vol. 123, Nos. 1–2, 2011, pp. 1-2.
Luo, Z., Atamturktur, H.S., Juang, C.H., Huang, H., and Lin, P.S., “Probability of
serviceability failure in a braced excavation in a spatially random field: Fuzzy finite
15
element approach,” Computers and Geotechnics, 38 (8), 2011, pp. 1031-1040.
Ku, C.S. and Juang, C.H., “Variation of CPTU parameters and liquefaction potential at
a reclaimed land induced by dynamic compaction,” Journal of GeoEngineering, Vol. 6,
No. 2, August 2011, pp. 89-98.
Hwang, J.-H., Chung, M.-C., Juang, D.-S., Lyu, Y.-D., and Juang, C.H., “Practical
optimization of group piles using discrete Lagrange multiplier method.” Optimization
and Engineering, Vol. 12 (1-2), pp. 83-109.
Luo, Z., Atamturktur, H.S., Cai, Y. and Juang, C.H., “Reliability analysis of basal-
heave in a braced excavation in a 2-D random field,” Computers and Geotechnics,
Vol. 39, 2012, pp. 27-37.
Xiao F., Amirkhanian S.N., Putman B., and Juang, C.H., “Feasibility of Superpave
gyratory compaction of rubberized asphalt concrete mixtures containing reclaimed
asphalt pavement,” Construction and Building Materials, 27 (1), pp. 432-438, 2012.
Luo, Z., Atamturktur, H.S., Juang, C.H., “Effect of spatial variability on probability-
based design of excavations against basal-heave,” Geotechnical Special Publication
(GSP) No. 225, ASCE, pp. 2876-2884, 2012.
Dang, H.P., Lin, H.D., and Juang, C.H., “Evaluation of soil variability influence on
deep excavation analysis - Simplified approach,” Geotechnical Special Publication
(GSP) No. 225, ASCE, 2012, pp. 2895-2903.
Ku, C.S., Juang, C. H. Chang, C.W., and Ching, J., “Probabilistic version of the
Robertson and Wride method for liquefaction evaluation: Development and
application,” Canadian Geotechnical Journal, 49 (1), pp. 27–44, 2012.
Ku, C.S. and Juang, C.H., “Liquefaction and cyclic softening potential of soils - A
unified CPTu-based approach,” Gèotechnique 62 (5), pp. 457-461, 2012.
Tien, Y.M., Juang, C.H., Chen, J.M., and Pai, C.H., “Isointensity-isoexposure concept
for seismic vulnerability analysis – A case study of the 1999 Chi-Chi, Taiwan
earthquake,” Engineering Geology, 131, pp. 1-10, March 2012.
Juang, C.H., Ching, J., Luo, Z., and Ku, C.S., “New models for probability of
liquefaction using standard penetration tests based on an updated database of case
histories,” Engineering Geology, 133, pp. 85-93, April 2012.
Luo, Z., Atamturktur, H.S., Cai, Y. and Juang, C.H., “Simplified approach for
reliability-based design against basal-heave failure in braced excavations considering
spatial effect,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 138,
No. 4, pp. 441-450, 2012.
16
Wu, S.H., Ou, C.Y., Ching, J., and Juang, C.H., “Reliability-based design for basal
heave stability of deep excavations in spatially varying soils,” Journal of Geotechnical
and Geoenvironmental Engineering, Vol. 138, No. 5, 594-603, 2012.
Wang, L., Ravichandran, N., and Juang, C.H., “Bayesian updating of KJHH model for
prediction of maximum ground settlement in braced excavations using centrifuge
data,” Computers and Geotechnics 44, pp. 1-8, June 2012.
Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., “Reliability analysis of rock wedge
stability – A knowledge-based clustered partitioning approach,” Journal of
Geotechnical and Geoenvironmental Engineering, 138 (6) , pp. 700-708, 2012.
Juang, C. H., Ching, J., Ku, C.S., and Hsieh, Y.H., “Unified CPTu-based probabilistic
model for assessing probability of liquefaction of sand and clay,” Géotechnique, 62
(10), pp. 877–892, July 2012.
Luo Z. and Juang, C.H., “Efficient reliability-based design of drilled shafts considering
spatial variability,” Journal of GeoEngineering, 7(2), pp. 33-42, 2012.
Xiao, F., Amirkhanian, S.N., Juang, C.H., Hu, S., Shen, J., “Model developments of
long-term aged asphalt binders,” Construction and Building Materials 37, pp. 248-256,
2012.
Lee, Y.F., Chi, Y.Y., Juang, C.H., and Lee, D.H., “Reply to comments by JP Wang
and Duruo Huang on ‘Annual probability and return period of soil liquefaction in
Yuanlin, Taiwan attributed to Chelungpu Fault and Changhua Fault’ by Lee et al.
(2010)” Engineering Geology, 149-150, 2012, pp. 97-98.
Juang, C.H., Wang, L., Atamturktur, S. and Luo, Z., “Reliability-based robust and
optimal design of shallow foundations in cohesionless soil in the face of uncertainty,”
Journal of GeoEngineering, Vol. 7, No. 3, 2012, pp. 43-55.
Juang, C. H. and Wang, L., “Reliability-based robust geotechnical design of spread
foundations using multi-objective genetic algorithm,” Computers and Geotechnics,
Vol. 48, 2013, pp. 96–106.
Luo, Z., Atamturktur, H.S., and Juang, C.H., “Bootstrapping for characterizing the
uncertainty of sample statistics for braced excavations,” Journal of Geotechnical and
Geoenvironmental Engineering, ASCE, Vol. 139, No. 1, 2013, pp. 13-23.
Wang, L., Hwang, J.H., and Juang, C.H., and Sez Atamturktur, “Reliability-based
design of rock slopes – A new perspective on design robustness,” Engineering
Geology, Vol. 154, 2013, pp. 56-63.
Juang, C.H., Luo, Z., Atamturktur, H.S., and Huang, H., “Bayesian Updating of Soil
17
Parameters for Braced Excavations Using Field Observations,” Journal of
Geotechnical and Geoenvironmental Engineering, Vol. 139, No. 3, 2013, pp. 395-406.
Wang, L., Hwang, J.H., Luo, Z., Juang, C.H., and Xiao, J., “Probabilistic back analysis
of slope failure - a case study in Taiwan,” Computers and Geotechnics, Vo. 51, 2013,
pp. 12-23.
Cai, Y., Gu, C., Wang, J., Juang, C.H., and Xu, C., “One-way cyclic triaxial behavior
of saturated clays: Comparison between constant and variable confining pressure,”
Journal of Geotechnical and Geoenvironmental Engineering, 2013. Vol. 139(5), 797–
809.
Wang, L., Luo, Z. and Juang, C.H., “Updating uncertain soil parameters by maximum
likelihood method for predicting maximum ground and wall movements in braced
excavations,” Foundation Engineering in the Face of Uncertainty Honoring Fred H.
Kulhawy, GSP 229, ASCE, edited by Withiam, J.L., Phoon, KK, Hussein, M.H., 2013,
pp. 530-541.
Juang, C.H., Liu, Z., and Atamturktur, H.S. “Reliability-based robust geotechnical
design of retaining walls,” Sound Geotechnical Research to Practice Honoring Robert
D. Holtz II, GSP 230, ASCE, edited by Stuedlein, A.W. and Christopher, B.R., 2013.
Dalton, S., Atamturktur, S., Juang, C.H., “Structural health monitoring for sustainable
and resilient infrastructure management,” BUILT- International Journal of Building,
Urban, Interior and Landscape Technology, Vol. 2, 2013, pp. 55-67.
Liu, Z., Juang, C.H., and Atamturktur, S., “Confidence level-based robust design of
cantilever retaining walls in sand,” Computers and Geotechnics, Vol. 52, pp.16-27.
Zhang, J., Huang, H.W., Juang, C.H., and Li, D.Q., “Extension of Hassan and Wolff
method for system reliability analysis of soil slopes,” Engineering Geology, 160, 81–
88, 2013.
Liu, Z., Atamturktur, S., Juang, C.H., “Performance based robust design optimization of
steel moment resisting frames,” Journal of Constructional Steel Research, Volume 89,
October 2013, pp. 165–174.
Juang, C. H., Ching, J., and Luo, Z., “Assessing SPT-Based probabilistic models for
liquefaction potential evaluation: A ten-year update,” Georisk: Assessment and
Management of Risk for Engineered Systems and Geohazards, Vol. 7, No. 3, pp. 137-
150, 2013.
Dalton S., Atamturktur S., Farajpour I. and Juang C.H., “An Optimization Based
Approach for Structural Design Considering Safety, Robustness, and Cost,” Journal of
Engineering Structures, 57, 2013, pp. 356-363.
18
Juang, C.H., Ching, J., Wang, L., Khoshnevisan, S., and Ku, C.S., “Simplified
procedure for estimation of liquefaction-induced settlement and site-specific
probabilistic settlement curve using CPT,” Canadian Geotechnical Journal, 2013, Vol.
50, pp. 1055-1066.
Juang, C.H., Wang, L., Liu, Z., Ravichandran, N., Huang, H., and Zhang, J., “Robust
geotechnical design of drilled shafts in sand - A new design perspective,” Journal of
Geotechnical and Geoenvironmental Engineering, Vol. 139, December 2013, pp.
2007-2019.
Juang, C.H., Wang, L., Khoshnevisan, S., and Atamturktur, S., “Robust Geotechnical
Design – Methodology and Applications,” Journal of GeoEngineering, Vol. 8, No. 3,
December 2013, pp. 71-81.
Dang, H.P., Lin, H.D., and Juang, C.H., “Analyses of braced excavation considering
parameter uncertainties using a finite element code,” Journal of the Chinese Institute
of Engineers, Vol. 37, no. 2, pp. 141-151, 2014.
Wang, L. Luo, Z., Xiao, J., and Juang, C.H., “Probabilistic inverse analysis of
excavation-induced wall and ground responses for assessing damage potential of
adjacent buildings,” Geotechnical and Geological Engineering – an international
journal, 32(2), pp. 273-285, 2014.
Juang, C.H., Wang, L., Hsieh, H.S., and Atamturktur, S., “Robust geotechnical design
of braced excavations in clays,” Structural Safety, Vol. 49, 2014, pp. 37-44.
Huang, H.W, Gong, W.P., Juang, C.H., Zhang, J., “Robust design of gravity retaining
walls,” Journal of Tongji University (Natural Science), Vol. 42, No. 3, March 2014,
pp. 377-385 (in Chinese).
Gong, W., Luo, Z., Juang, C.H., Huang, H., Zhang, J., and Wang, L. “Optimization of
site exploration program for improved prediction of tunneling-induced ground
settlement in clays,” Computers and Geotechnics, Vol. 56, March 2014, pp. 69–79.
Gong, W., Wang, L., Juang, C.H., Zhang, J., and Huang, H., “Robust geotechnical
design of shield-driven tunnels,” Computers and Geotechnics, Vol. 56, March 2014,
pp. 191-201.
Wang, L., Juang, C.H., Atamturktur, S., Gong, W., Khoshnevisan, K. and Hsieh, H.S.,
“Optimization of design of supported excavations in multi-layer strata,” Journal of
GeoEngineering, Vol. 9, No. 1, April 2014, pp. 35-44.
Xiao, J., Juang, C.H., Wei, K., and Xu, S., “Effects of principal stress rotation on the
cumulative deformation of normally consolidated soft clay under subway traffic
loading,” Journal of Geotechnical and Geoenvironmental Engineering, 140(4), 2014,
19
paper 04013046.
Wang, L., Luo, Z., Gong, W., Khoshnevisan, S., and Juang, C.H. “Moment methods
for assessing probability of serviceability failure in braced excavations.” GeoCongress
2014: Geo-Characterization and Modeling for Sustainability, Geotechnical Special
Publication (GSP) 234, edited by Abu-Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp.
3293-3302.
Wang, L., Luo, Z., Khoshnevisan, S., and Juang, C.H. “Robust design of braced
excavations using multi-objective optimization – Focusing on prevention of damage to
adjacent buildings.” GeoCongress 2014: Geo-Characterization and Modeling for
Sustainability, Geotechnical Special Publication (GSP) 234, ASCE, edited by Abu-
Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp. 3178-3187.
Luo, Z., Wang, L., Khoshnevisan, S., and Juang, C.H. “Effect of spatial variability on
reliability-based design of drilled shafts,” GeoCongress 2014: Geo-Characterization
and Modeling for Sustainability, Geotechnical Special Publication (GSP) 234, ASCE,
edited by Abu-Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp. 3274-3282.
Gong, W., Luo, Z., Wang, L., Huang, H., and Juang, C.H. “Optimization of the level
of site exploration effort for improving accuracy of tunneling-induced ground
settlement prediction.” GeoCongress 2014: Geo-Characterization and Modeling for
Sustainability, Geotechnical Special Publication (GSP) 234, ASCE, edited by Abu-
Farsakh, M., Yu, X. and Hoyos, L.R., 2014, pp. 505-514.
Huang, H., Gong, W., Juang, C.H., Khoshnevisan, S., “Robust geotechnical design of
shield-driven tunnels using fuzzy sets,” GeoShanghai 2014: Tunneling and
Underground Construction, Geotechnical Special Publication (GSP) 242, ASCE, 2014,
pp. 184-194.
Xiao, J., Juang, C. H., Xu, C., Li, X., and Wang, L. (2014). “Strength and deformation
characteristics of compacted silt from the lower reaches of Yellow River of China
under monotonic and repeated loading.” Engineering Geology, 178, 49-57.
Xu, C., Wang, L. Tien, Y.M., Chen, J.M., Juang, C.H., “Robust design of rock slopes
with multiple failure modes - Modeling uncertainty of estimated parameter statistics
with fuzzy number,” Environmental Earth Sciences, Springer, October 2014, Volume
72, Issue 8, pp 2957-2969. DOI 10.1007/s12665-014-3201-1.
Gong, W., Khoshnevisan, S., Juang, C.H., “Gradient-based design robustness measure
for robust geotechnical design,” Canadian Geotechnical Journal, 2014, 51(11): 1331-
1342, 10.1139/cgj-2013-0428.
Liu, Z., Atamturktur, S., and Juang, C.H., “Reliability based Multi-objective Robust
Design Optimization of Steel Moment Resisting Frame Considering Spatial Variability
20
of Connection Parameters,” Engineering Structures, Vol. 76, October 2014, pp. 393–
403. DOI: 10.1016/j.engstruct.2014.07.024
Atamturktur, S., Liu, Z., Cogan, S. and Juang, C.H., “Calibration of imprecise and
inaccurate numerical models considering fidelity and robustness: A multi-objective
optimization based approach,” Structural and Multidisciplinary Optimization,
Springer, Published online August 2014, DOI 10.1007/s00158-014-1159-y.
Gong, W., Wang, L., Khoshnevisan, S., Juang, C.H., Huang, H., and Zhang, J.
“Robust geotechnical design of earth slopes,” Journal of Geotechnical and
Geoenvironmental Engineering, Volume 141, Issue 1 (January 2015), DOI
10.1061/(ASCE)GT.1943-5606.0001196, 04014084.
Khoshnevisan, S., Gong, W., Juang, C.H., and Atamturktur, S., “Efficient robust
geotechnical design of drilled shafts in clay using a spreadsheet,” Journal of
Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 141, No. 2, February
2015, 04014092. DOI 10.1061/(ASCE)GT.1943-5606.0001214 , 04014092.
Zhang, J., Huang, H.W., Juang, C.H., and Su, W.W., “Geotechnical reliability analysis
with limited data: Consideration of model selection uncertainty,” Engineering
Geology, Vol. 181, October 2014, pp. 27–37.
Khoshnevisan, S., Juang, C.H., Wang, L., and Gong, W., “Robust design of
geotechnical systems – An update,” Georisk: Assessment and Management of Risk for
Engineered Systems and Geohazards Vol. 8, No. 4, 2014, pages 217-234.
DOI/10.1080/17499518.2014.980274.
Gong, W., Juang, C.H., Huang, H., Zhang, J., and Luo, Z., “Improved analytical model
for circumferential behavior of jointed shield tunnels considering the longitudinal
differential settlement,” Tunnelling and Underground Space Technology, Volume 45,
January 2015, Pages 153–165, DOI 10.1016/j.tust.2014.10.003.
Huang, H., Gong, W., Khoshnevisan, S., Juang, C.H., Zhang, D., and Wang, L.,
“Simplified procedure for finite element analysis of the longitudinal performance of
shield tunnels considering spatial soil variability in longitudinal direction,” Computers
and Geotechnics, Vol. 64, March 2015, pp. 132–145.
doi:10.1016/j.compgeo.2014.11.010.
Gong, W., Khoshnevisan, S., Huang, H., Juang, C.H., and Zhang, J., “R-LRFD:
Robust load and resistance factor design,” Geotechnical Special Publication (GSP) No.
256, ASCE, Proceedings of IFCEE 2015, pp. 299-308.
Khoshnevisan, S., Wang, L., Gong, W., and Juang, C.H., “Robust design optimization
applied to braced excavations,” Geotechnical Special Publication (GSP) No. 256,
ASCE, Proceedings of IFCEE 2015, pp. 1380-1388.
21
Khoshnevisan, S., Juang, C.H., Zhou, Y.G., Ku, C.S., Wang, L., and Ding, H.J.,
“Assessing liquefaction-induced lateral spreads using CPT cases from the
Christchurch, New Zealand earthquakes,” Geotechnical Special Publication No. 256,
ASCE, Proceedings of IFCEE 2015, pp. 1189-1196.
Wang, L., Gong, W., Luo, Z., Khoshnevisan, S., and Juang, C.H., “Reliability-based
robust geotechnical design of rock bolts for slope stabilization,” Geotechnical Special
Publication No. 256, ASCE, Proceedings of IFCEE 2015, pp. 1926-1935.
Gong, W., Huang, H., Juang, C.H., Atamturktur, S., Brownlow, A., “Improved shield
tunnel design methodology incorporating design robustness,” Canadian Geotechnical
Journal, Published on the web 26 February 2015, 10.1139/cgj-2014-0458.
Cai, Y., Sun, Q., Guo, L., Juang, C.H., and Wang J., “Permanent deformation
characteristics of saturated sand under cyclic loading,” Canadian Geotechnical Journal,
14 February 2015, 10.1139/cgj-2014-0341.
Zhang, D.M., Ma, L.X., Zhang, J., Hicher, P.Y., Juang, C.H., “Ground and tunnel
responses induced by partial leakage in saturated clay with anisotropic permeability,”
Engineering Geology, Volume 189, 30 April 2015, Pages 104–115.
doi:10.1016/j.enggeo.2015.02.005
Luo, Z., Wang, L., Gong, W., and Juang, C.H., “Probabilistic Approaches for Ultimate
Resistance of Drilled Shafts in Sands Considering Spatial Variability,” Geotechnical
Engineering Journal of the SEAGS & AGSSEA,Vol. 46 No.2 June 2015 ISSN 0046-
5828, pp. 102-110.
Khoshnevisan, S., Juang, C.H., Zhou, Y.G., and Gong, W., “Probabilistic assessment
of liquefaction-induced lateral spreads using CPT - Focusing on the 2010-2011
Christchurch events,” Engineering Geology Volume 192, 18 June 2015, Pages 113–
128. doi:10.1016/j.enggeo.2015.04.001
Li, J.P., Zhang, J., Liu, S.N., and Juang, C.H., “Reliability-based code revision for
design of pile foundations: Practice in Shanghai, China,” Soils and Foundations, 2015,
Volume 55, Issue 3, June 2015, Pages 637–649.
Ching, J., Wang, J.S., Juang, C.H., Ku, C.S., “Cone penetration test (CPT)-based
stratigraphic profiling using the wavelet transform modulus maxima method,”
Canadian Geotechnical Journal, 2015, 52, 1993-2007.
Chen, Q., Wang, C. and Juang, C.H., “CPT-based evaluation of liquefaction potential
accounting for soil spatial variability at multiple scales,” Journal of Geotechnical and
Geoenvironmental Engineering, 2015, 10.1061/(ASCE)GT.1943-5606.0001402,
04015077.
22
Gong, W., Juang, C.H., and Martin II, J.R. (2015). "Numerical integration method for
computing reliability index of geotechnical system." Georisk: Assessment and
Management of Risk for Engineered Systems and Geohazards, 1-12.
Gong, W., Juang, C.H., Khoshnevisan, S., Phoon, K.K. (2016). "R-LRFD: load and
resistance factor design considering design robustness," Computers and Geotechnics,
Vol. 74, April 2016, 74–87.
Sert, S., Luo, Z., Xiao, J., Gong, W. and Juang, C.H. (2016), “Probabilistic analysis of
responses of cantilever wall-supported excavations in sands considering vertical
spatial variability.” Computers and Geotechnics Vol. 75 (2016) 182–191.
Khoshnevisan, S., Wang, L., and Juang, C.H. (2016), “Simplified procedure for
reliability-based robust geotechnical design of drilled shafts in clay using spreadsheet,”
Georisk: Assessment and Management of Risk for Engineered Systems and
Geohazards, (in press).
Gong, W., Huang, H., Juang, C.H., and Wang, L. (2016). “Simplified Procedure for
Robust Geotechnical Design of Shoring System for Deep Excavation,” Marine
Georesources & Geotechnology (in press).
Gong, W., Tien, Y.M., Juang, C.H, Martin, II, J.R., and Zhang, J. (2016) “Calibration
of empirical models considering model fidelity and model robustness Focusing on
predictions of liquefaction-induced settlements,” Engineering Geology (in press).
Zhang, J., Juang, C.H., Martin, J.R., and Huang, H.W. (2016), “Inter-region variability
of Robertson and Wride method for liquefaction hazard analysis,” Engineering
Geology (in press).
Gong, W., Juang, C.H., Martin II, J.R., Ching, J. (2016). "New sampling method and
procedures for computing failure probability," Journal of Engineering Mechanics (in
press).
HONORS AND AWARDS
GEOSNet Award 2015, Geotechnical Safety Network, “Recognises an individual who
has made impactful contributions to geotechnical reliability, particularly theoretical
innovations that led to improvements in geotechnical engineering practice or theoretical
advances.” Awarded October 2015, Rotterdam, Netherlands.
Best Paper Award, “Robust geotechnical design of shield-driven tunnels using fuzzy
sets,” Geotechnical Special Publication (GSP) 242, ASCE, GeoShanghai International
Conference, 26-28 May 2014, Shanghai, China.
23
Best Paper Award, “Assessing SPT-Based probabilistic models for liquefaction potential
evaluation: A ten-year update,” Georisk, 7(3), 137-150, 2013; April 2014.
Chair Professor of the Innovation Center for Disaster Prevention, Tongji University
College of Civil Engineering, Tongji University, 2014-2018.
Chu-Tian Chair Professor, Wuhan University, China, 2014 – 2018.
Geotechnical Lecturer Award, Chinese Taipei (Taiwan) Geotechnical Society (TGS);
the highest award given by TGS every two years; September 2013.
Alumni Award for Outstanding Achievement in Research, Clemson University; the top
annual research achievement award given annually to a faculty member in the entire
university; awarded May 2013.
Best Paper Award, “Reliability-based robust and optimal design of shallow foundations
in cohesionless soil in the face of uncertainty,” Journal of GeoEngineering, Chinese
Taipei Geotechnical Society (TGS), awarded March 2013.
Glenn Professor of Civil Engineering, Clemson University (2012-present). The first
recipient of the Glenn Professorship at Clemson through the Glenn endowment.
Kwang-Hua Visiting Professorship, Tongji University, China, June 2011.
Chair Professorship, National Central University, Taiwan, China (2008-2010, initial
appointment; 2011-2013, reappointed for 2nd term; 2014, reappointed for 3rd term)
Honorary Chair Professorship, National Taiwan University of Science and
Technology (appointed through National Science Council, Taiwan), July - December
2009.
Board of Trustees Award for Faculty Excellence, Clemson University, April 2009.
Outstanding Editorial Board Service Award, ASCE Journal of Geotechnical and
Geoenvironmental Engineering, American Society of Civil Engineers, 2008.
McQueen Quattlebaum Faculty Achievement Award, Clemson University College of
Engineering and Science, April 2008; annual top engineering faculty achievement award.
Best Paper Award, “Liquefaction Potential Index: A Critical Assessment,” Journal of
GeoEngineering, Chinese Taipei Geotechnical Society, awarded March 2008.
Board of Trustees Award for Faculty Excellence, Clemson University, April 2002.
The TK Hsieh Award 2001, The Institution of Civil Engineers (ICE), United
24
Kingdom, for “the best paper in the field of structural and soil vibration caused by
mechanical plant, waves and seismic effect” published by the ICE, 2001. [Past award
recipients included the late Professor Harry Bolton Seed among many others]
Chi Epsilon Outstanding Teacher Award, Civil Engineering Department, Clemson
University, 1985.
Outstanding Research Paper Award, “A Study of Factors Controlling Slope Stability in
the Mudstone Area," Journal of Chinese Institute of Civil and Hydraulic Engineering,
Chinese Institute of Civil and Hydraulic Engineering, Taiwan, awarded November
1976.
Top Related